1 2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
3 * i386-dis.c (vex_len_table): Reformat.
5 2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
7 * i386-dis.c (MOD_VEX_51): Renamed to ...
10 (mod_table): Likewise.
12 2009-12-14 Nick Clifton <nickc@redhat.com>
15 * arm-dis.c (arm_opcodes): Specify %R in cases where using r15
16 results in unpredictable behaviour.
17 (print_insn_arm): Handle %R.
19 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
21 * i386-dis.c (get_valid_dis386): Set vex.w to 0 for VEX C5
23 (print_insn): Don't set vex.w here.
25 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
27 * i386-dis.c (print_insn): Set vex.w to 0.
29 2009-12-11 Quentin Neill <quentin.neill@amd.com>
31 * i386-dis.c (get_vex_imm8): Extend logic to apply in all cases,
32 to avoid fetching ahead for the immediate bytes when OP_E_memory
33 has already been called. Fix indentation.
35 2009-12-11 Nick Clifton <nickc@redhat.com>
37 * Makefile.in: Regenerate.
38 * configure: Regenerate.
39 * arm-dis.c: Fix shadowed variable warnings.
40 * cgen-opc.c: Likewise.
41 * cr16-dis.c: Likewise.
42 * crx-dis.c: Likewise.
43 * d30v-dis.c: Likewise.
44 * fr30-dis.c: Likewise.
45 * frv-opc.c: Likewise.
46 * h8500-dis.c: Likewise.
47 * i386-dis.c: Likewise.
48 * i960-dis.c: Likewise.
49 * ia64-gen.c: Likewise.
50 * ia64-opc.c: Likewise.
51 * m32c-asm.c: Likewise.
52 * m32c-dis.c: Likewise.
53 * m68k-dis.c: Likewise.
54 * maxq-dis.c: Likewise.
55 * mcore-dis.c: Likewise.
56 * mep-asm.c: Likewise.
57 * microblaze-dis.c: Likewise.
58 * mmix-dis.c: Likewise.
59 * ns32k-dis.c: Likewise.
60 * or32-opc.c: Likewise.
61 * s390-dis.c: Likewise.
62 * sh64-dis.c: Likewise.
63 * spu-dis.c: Likewise.
64 * tic30-dis.c: Likewise.
66 2009-12-09 Nick Clifton <nickc@redhat.com>
69 * arm-dis.c (print_insn_arm): Mark insns that use the PC in
70 post-indexed addressing as unpredictable.
72 2009-12-03 H.J. Lu <hongjiu.lu@intel.com>
74 * i386-dis.c (FXSAVE_Fixup): New.
76 (mod_table): Use FXSAVE on fxsave and fxrstor.
78 * i386-opc.tbl: Add fxsave64 and fxrstor64.
79 * i386-tbl.h: Regenerated.
81 2009-12-02 Nick Clifton <nickc@redhat.com>
82 Richard Earnshaw <rearnsha@arm.com>
85 * arm-dis.c (thumb32_opc): Adjust disassembly of QADD, QDADD, QSUB
88 2009-11-30 Massimo Ruo Roch <massimo.ruoroch@polito.it>
91 * m68k-opc.c (m68k_opcodes): Allow the STLDSR instruction on the
94 2009-11-17 Quentin Neill <quentin.neill@amd.com>
95 Sebastian Pop <sebastian.pop@amd.com>
97 * i386-dis.c (get_vex_imm8): Increase bytes_before_imm when
98 decoding the second source operand from the immediate byte.
99 (OP_EX_VexW): Pass an extra integer to identify the second
100 and third source arguments.
102 2009-11-19 H.J. Lu <hongjiu.lu@intel.com>
104 * i386-opc.tbl: Add IsLockable to cmpxch16b.
105 * i386-tbl.h: Regenerated.
107 2009-11-19 Nick Clifton <nickc@redhat.com>
110 * arm-dis.c (print_insn_arm): Do not print an offset of zero when
111 decoding Immediaate Offset addressing.
113 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
116 * i386-dis.c (get_vex_imm8): Do not increment codep.
117 Avoid incrementing bytes_before_imm when OP_E_memory
118 has already forwarded the codep pointer.
119 (OP_EX_VexW): Increment codep to skip mod/rm byte.
121 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
123 * i386-dis.c (VEX_LEN_XOP_08_A0): Removed.
124 (VEX_LEN_XOP_08_A1): Removed.
125 (xop_table): Remove entries for VEX_LEN_XOP_08_A0 and
127 (vex_len_table): Same.
128 * i386-gen.c (CPU_CVT16_FLAGS): Removed.
129 (cpu_flags): Remove field for CpuCVT16.
130 * i386-opc.h (CpuCVT16): Removed.
131 (i386_cpu_flags): Remove bitfield cpucvt16.
132 (i386-opc.tbl): Remove CVT16 instructions.
133 * i386-init.h: Regenerated.
134 * i386-tbl.h: Regenerated.
136 2009-11-17 Sebastian Pop <sebastian.pop@amd.com>
137 Quentin Neill <quentin.neill@amd.com>
139 * i386-dis.c (OP_Vex_2src_1): New.
140 (OP_Vex_2src_2): New.
144 (VEX_LEN_XOP_08_A0): Added.
145 (VEX_LEN_XOP_08_A1): Added.
146 (VEX_LEN_XOP_09_80): Added.
147 (VEX_LEN_XOP_09_81): Added.
148 (xop_table): Added an entry for XOP_08. Handle xop instructions.
149 (vex_len_table): Added entries for VEX_LEN_XOP_08_A0,
150 VEX_LEN_XOP_08_A1, VEX_LEN_XOP_09_80, VEX_LEN_XOP_09_81.
151 (get_valid_dis386): Handle XOP_08.
153 * i386-gen.c (cpu_flag_init): Add CPU_XOP_FLAGS and CPU_CVT16_FLAGS.
154 (cpu_flags): Add CpuXOP and CpuCVT16.
155 (opcode_modifiers): Add XOP08, Vex2Sources.
156 * i386-opc.h (CpuXOP): Added.
158 (i386_cpu_flags): Add cpuxop and cpucvt16.
160 (Vex2Sources): Added.
161 (i386_opcode_modifier): Add xop08, vex2sources.
162 * i386-opc.tbl: Add entries for XOP and CVT16 instructions.
163 * i386-init.h: Regenerated.
164 * i386-tbl.h: Regenerated.
166 2009-11-17 Nick Clifton <nickc@redhat.com>
169 * arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
170 instruction variants. Add pattern for MRS variant that was being
172 (arm_decode_shift): Place error message in a comment.
173 (print_insn_arm): Note that writing back to the PC is
175 Only print 'p' variants of cmp/cmn/teq/tst instructions if
176 decoding for pre-V6 architectures.
178 2009-11-17 Edward Nevill <edward.nevill@arm.com>
180 * arm-dis.c (print_insn_thumb32): Handle undefined instruction.
182 2009-11-14 Doug Evans <dje@sebabeach.org>
184 * Makefile.am (stamp-xc16x): Use ../cpu/xc16x.cpu instead of
186 * Makefile.in: Regenerate.
188 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
190 * i386-dis.c (OP_E_extended): Removed.
192 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
194 * i386-dis.c (print_insn): Check rex_ignored.
196 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
198 * i386-dis.c (ckprefix): Updated to return 0 if number of
199 prefixes > 14 and record the last position for each prefix.
200 (lock_prefix): Removed.
201 (data_prefix): Likewise.
202 (addr_prefix): Likewise.
203 (repz_prefix): Likewise.
204 (repnz_prefix): Likewise.
205 (last_lock_prefix): New.
206 (last_repz_prefix): Likewise.
207 (last_repnz_prefix): Likewise.
208 (last_data_prefix): Likewise.
209 (last_addr_prefix): Likewise.
210 (last_rex_prefix): Likewise.
211 (last_seg_prefix): Likewise.
212 (MAX_CODE_LENGTH): Likewise.
213 (ADDR16_PREFIX): Likewise.
214 (ADDR32_PREFIX): Likewise.
215 (DATA16_PREFIX): Likewise.
216 (DATA32_PREFIX): Likewise.
217 (REP_PREFIX): Likewise.
218 (seg_prefix): Likewise.
219 (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
220 (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
221 DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
222 (get_valid_dis386): Updated.
224 (OP_Monitor): Likewise.
225 (REP_Fixup): Likewise.
226 (print_insn): Display all prefixes.
227 (putop): Set PREFIX_DATA on used_prefixes only if it is used.
228 (intel_operand_size): Likewise.
229 (OP_E_register): Likewise.
232 (OP_IMREG): Likewise.
236 (CRC32_Fixup): Likewise.
237 (MOVBE_Fixup): Likewise.
238 (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
240 (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
241 used_prefixes only if it is used.
243 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
245 * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
246 or, sbb, sub, xor and xchg with register only operands.
247 * i386-tbl.h: Regenerated.
249 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
251 * i386-gen.c (opcode_modifiers): Add IsLockable.
253 * i386-opc.h (IsLockable): New.
254 (i386_opcode_modifier): Add islockable.
256 * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
257 bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
259 * i386-tbl.h: Regenerated.
261 2009-11-12 Daniel Jacobowitz <dan@codesourcery.com>
263 * arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
264 generic coprocessor instructions for FPA loads and stores.
265 (print_insn_coprocessor): Remove %C support. Display address for
266 PC-relative offsets in %A.
268 2009-11-11 H.J. Lu <hongjiu.lu@intel.com>
270 * i386-dis.c (all_prefixes): New.
271 (ckprefix): Set all_prefixes.
272 (print_insn): Print all_prefixes instead of lock_prefix,
273 repz_prefix, repnz_prefix, addr_prefix and data_prefix.
275 2009-11-11 Nick Clifton <nickc@redhat.com>
278 * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
279 (print_insn_arm): Extend %s format control code to check for
280 unpredictable addressing modes. Add support for %S format control
281 code which suppresses this check.
282 (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
283 (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
284 PRE_BIT_SET): New macros.
285 (print_insn_coprocessor): Use the new macros instead of magic
287 (print_arm_address): Likewise.
288 (pirnt_insn_arm): Likewise.
289 (print_insn_thumb32): Likewise.
291 2009-11-11 Nick Clifton <nickc@redhat.com>
293 * po/id.po: Updated Indonesian translation.
295 2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
297 * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
299 2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
301 * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
302 reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
303 B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
305 (get_valid_dis386): Removed unused condition (from cut/n/paste) for
308 2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
309 Quentin Neill <quentin.neill@amd.com>
311 * opcodes/i386-dis.c (OP_LWPCB_E): New.
314 (USE_XOP_8F_TABLE): New.
316 (REG_XOP_LWPCB): New.
320 (reg_table): Redirect REG_8F to XOP_8F_TABLE.
321 Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
323 (get_valid_dis386): Handle USE_XOP_8F_TABLE.
324 Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
325 to access to the vex_table.
329 * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
330 (cpu_flags): Add CpuLWP.
331 (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
332 * opcodes/i386-opc.h (CpuLWP): New.
333 (i386_cpu_flags): Add bit cpulwp.
337 (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
338 * opcodes/i386-opc.tbl (llwpcb): Added.
342 2009-11-04 DJ Delorie <dj@redhat.com>
344 * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
345 (mvtcp, mvfcp, opecp): Remove.
346 * rx-decode.c: Regenerate.
347 * rx-dis.c (cpen): Remove.
349 2009-11-03 Doug Evans <dje@sebabeach.org>
351 * m32c-desc.c: Regenerate.
352 * mep-desc.c: Regenerate.
354 2009-11-02 Paul Brook <paul@codesourcery.com>
356 * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
357 Add VFPv4 instructions.
359 2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
361 * i386-dis.c (OP_VEX_FMA): Removed.
363 (Vex128FMA): Removed.
364 (prefix_table): First source operand of FMA4 insns is decoded
365 with Vex not with VexFMA.
366 (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
367 when vex.w is set. Third source operand is decoded with
369 2009-10-27 Alan Modra <amodra@bigpond.net.au>
371 * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
372 * Makefile.in: Regenerate.
373 * po/POTFILES.in: Regenerate.
375 2009-10-23 Doug Evans <dje@sebabeach.org>
377 * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
378 * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
379 * cgen-bitset.c: Update.
380 * fr30-desc.h: Regenerate.
381 * frv-desc.h: Regenerate.
382 * ip2k-desc.h: Regenerate.
383 * iq2000-desc.h: Regenerate.
384 * lm32-desc.h: Regenerate.
385 * m32c-desc.h: Regenerate.
386 * m32c-opc.h: Regenerate.
387 * m32r-desc.h: Regenerate.
388 * mep-desc.h: Regenerate.
389 * mt-desc.h: Regenerate.
390 * openrisc-desc.h: Regenerate.
391 * xc16x-desc.h: Regenerate.
392 * xstormy16-desc.h: Regenerate.
394 2009-10-22 DJ Delorie <dj@redhat.com>
396 * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
397 * rx-decode.c: Regenerated.
399 2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
402 * i386-dis.c: Document LB, LS and LV macros.
403 (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
404 with the 64-bit displacement or immediate operand.
405 (putop): Handle LB, LS and LV macros.
407 2009-10-18 Doug Evans <dje@sebabeach.org>
409 * lm32-opinst.c: Regenerate.
410 * m32c-desc.c: Regenerate.
411 * m32r-opinst.c: Regenerate.
412 * openrisc-ibld.c: Regenerate.
413 * xc16x-desc.c: Regenerate.
414 * xc16x-desc.h: Regenerate.
416 2009-10-17 Doug Evans <dje@sebabeach.org>
418 * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
419 (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
420 sorted alphabetically.
421 (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
422 stamp-* rules are sorted alphabetically.
423 * Makefile.in: Regenerate.
425 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
427 * i386-opc.h: Use enum instead of nested macros.
429 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
431 * i386-dis.c: Simplify enums.
433 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
434 Ineiev <ineiev@gmail.com>
437 * i386-dis.c: Use enum instead of nested macros.
439 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
441 * i386-dis.c (MAX_BYTEMODE): Removed.
443 2009-10-14 Tomas Hurka <tom@hukatronic.cz>
446 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
448 2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
450 * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
453 2009-10-07 Michael Eager <eager@eagercon.com>
455 * microblaze-dis.c: Add include for microblaze-dis.h,
456 eliminate local extern decls.
457 * microblaze-dis.h: New.
459 2009-10-06 Nick Clifton <nickc@redhat.com>
461 * po/fi.po: Updated Finnish translation.
463 2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
465 * opc2c.c: Include "libiberty.h" and <errno.h>.
466 (orig_filename): Constify.
467 (dump_lines): Fix line number directive.
468 (main): Set orig_filename to basename of input file. Use
471 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
472 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
473 instead of $(EXEEXT).
474 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
475 $(LINK_FOR_BUILD). Link with libiberty.
476 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
477 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
478 * Makefile.in: Regenerated.
479 * rx-decode.c: Regenerated.
481 2009-10-03 Paul Reed <paulreed@paddedcell.com>
483 * arm-dis.c (print_insn): Check symtab_size not *symtab.
485 2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
487 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
488 * i386-tbl.h: Regenerated.
490 2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
492 * ppc-dis.c (ppc_opts): Add "476" entry.
493 * ppc-opc.c (PPC476): Define.
494 (powerpc_opcodes): Update mnemonics where required for 476.
496 2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
498 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
499 * ppc-dis.c (ppc_opts): Likewise.
500 Rename "ppca2" to "a2".
502 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
504 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
506 2009-09-29 DJ Delorie <dj@redhat.com>
508 * Makefile.am: Add RX files.
509 * configure.in: Add support for RX target.
510 * disassemble.c: Likewise.
511 * Makefile.in: Regenerate.
512 * configure: Regenerate.
514 * rx-decode.c: New file.
515 * rx-decode.opc: New file.
516 * rx-dis.c: New file.
518 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
520 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
521 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
523 2009-09-25 Michael Eager <eager@eagercon.com>
525 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
526 microblaze_decode_insn): Add declarations.
527 (get_delay_slots_microblaze): Remove.
529 2009-09-25 Martin Thuresson <martint@google.com>
531 Update sources to make arc and arm targets compile cleanly with
533 * arc-dis.c Fix casts.
534 * arc-ext.c: Add casts.
535 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
538 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
540 * i386-gen.c (opcode_modifiers): Remove Vex256.
541 (set_bitfield): Handle XXX=V.
543 * i386-opc.h (Vex): Update comments.
546 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
548 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
549 * i386-tbl.h: Regenerated.
551 2009-09-23 Nick Clifton <nickc@redhat.com>
553 * po/fr.po: Updated French translation.
555 2009-09-21 Ben Elliston <bje@au.ibm.com>
556 Peter Bergner <bergner@vnet.ibm.com>
558 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
559 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
560 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
561 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
563 (ERAT_T): New operand.
564 (XWC_MASK): New mask.
568 2009-09-18 Nick Clifton <nickc@redhat.com>
570 * po/es.po: Updated Spanish translation.
571 * po/vi.po: Updated Vietnamese translation.
573 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
575 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
578 2009-09-14 Nick Clifton <nickc@redhat.com>
580 * po/nl.po: Updated Dutch translation.
582 2009-09-11 Nick Clifton <nickc@redhat.com>
584 * po/opcodes.pot: Updated by the Translation project.
586 2009-09-11 Martin Thuresson <martint@google.com>
588 Updated sources to compile cleanly with -Wc++-compat:
589 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
590 * ldcref.c: Add casts.
591 * ldctor.c: Add casts.
593 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
594 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
595 * ldlang.h (enum statement_enum): Move to top level.
596 * ldmain.c: Add casts.
597 * ldwrite.c: Add casts.
598 * lexsup.c: Add casts. (enum control_enum): Move to top level.
599 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
601 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
603 * s390-dis.c (print_insn_s390): Avoid 'long long'.
605 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
607 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
608 (print_insn_s390): Signextend and shift pcrel operands before printing.
610 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
612 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
613 VEX_LEN_AE_R_X_M_0 in comments.
615 2009-09-08 DJ Delorie <dj@redhat.com>
617 * mep-opc.c: Regenerate.
619 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
621 * z8kgen.c (struct op): Replace unused flavor with id.
622 (opt): Remove extra xorb entry.
623 (func): Use id field as fallback.
624 (sub): Return new string, caller changed.
625 (internal): Allocate end marker. Assign unique id before sorting.
626 (gas): Likewise. Fix loop end condition.
627 * z8k-opc.h: Regenerate.
629 2009-09-08 Alan Modra <amodra@bigpond.net.au>
631 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
633 2009-09-07 Alan Modra <amodra@bigpond.net.au>
635 * z8kgen.c (func): Fix thinko last patch.
637 2009-09-07 Alan Modra <amodra@bigpond.net.au>
639 * z8kgen.c (func): Stabilize qsort of identically named entries.
640 * z8k-opc.h: Regenerate.
642 2009-09-07 Tristan Gingold <gingold@adacore.com>
644 * po/opcodes.pot: Regenerate.
646 2009-09-07 Alan Modra <amodra@bigpond.net.au>
648 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
649 * configure: Regenerate.
650 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
651 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
652 (i386-gen, ia64-gen, z8kgen): ..here.
653 * Makefile.in: Regenerate.
655 2009-09-07 Tristan Gingold <gingold@adacore.com>
657 * z8k-opc.h: Regenerate.
659 2009-09-05 Martin Thuresson <martin@mtme.org>
661 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
662 * m88k-dis.c (m88kdis): Rename variable class to in_class.
663 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
664 Rename argument class to symbol_class.
666 2009-09-04 Jie Zhang <jie.zhang@analog.com>
668 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
669 to the new encoding of DBGA, DBGAH, and DBGAL.
670 (_print_insn_bfin): Likewise.
672 2009-09-03 Jie Zhang <jie.zhang@analog.com>
674 * bfin-dis.c (_print_insn_bfin): Don't declare.
675 (print_insn_bfin): Don't declare.
676 (dregs_pair): Remove.
677 (ignore_bits): Remove.
680 2009-09-03 Jie Zhang <jie.zhang@analog.com>
682 * bfin-dis.c (IS_DREG): Define.
688 (decode_REGMV_0): Check illegal register move instructions.
690 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
692 * Makefile.am (BUILD_LIBINTL): New variable.
693 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
694 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
695 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
696 * Makefile.in: Regenerate.
698 2009-09-01 DJ Delorie <dj@redhat.com>
700 * mep-asm.c: Regenerate.
701 * mep-desc.c: Regenerate.
702 * mep-opc.c: Regenerate.
704 2009-09-01 Tristan Gingold <gingold@adacore.com>
706 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
707 dependencies. Remove unused FORMAT variable.
708 * configure.com: New file to create build.com DCL script for
709 Itanium VMS or Alpha VMS.
711 2009-08-29 Martin Thuresson <martin@mtme.org>
713 * cris-dis.c (bytes_to_skip): Update code to use new name.
714 * i386-dis.c (putop): Update code to use new name.
715 * i386-gen.c (process_i386_opcodes): Update code to use
717 * i386-opc.h (struct template): Rename struct template to
718 insn_template. Update code accordingly.
719 * i386-tbl.h (i386_optab): Update type to use new name.
720 * ia64-dis.c (print_insn_ia64): Rename variable template
722 * tic30-dis.c (struct instruction, get_tic30_instruction):
723 Update code to use new name.
724 * tic54x-dis.c (has_lkaddr, get_insn_size)
725 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
726 Update code to use new name.
727 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
728 Update type to new name.
729 * z8kgen.c (internal, gas): Rename variable new to new_op.
731 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
733 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
734 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
735 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
736 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
737 * Makefile.in: Regenerated.
739 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
741 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
742 [INSTALL_LIBBFD]: ... here, ...
743 [INSTALL_LIBBFD]: ... and empty overrides here.
744 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
745 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
746 * Makefile.in: Regenerate.
747 * configure: Regenerate.
749 2009-08-26 Philippe De Muyter <phdm@macqel.be>
751 * m68k-dis.c (print_insn_arg): Add movecr register names for
752 coldfire v4e families.
754 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
756 * Makefile.am (SUBDIRS): Build '.' before 'po'.
757 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
758 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
759 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
760 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
761 (i386-gen.o): New rule.
762 ($(srcdir)/i386-init.h): Adjust.
763 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
764 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
765 (ia64-gen.o): New rule.
766 (ia64_asmtab_deps): New variable.
767 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
768 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
769 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
771 (s390-opc.tab): Adjust.
772 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
774 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
775 * Makefile.in: Regenerate.
776 * z8kgen.c (gas): Avoid '/*' in comment.
777 * z8k-opc.h (func): Regenerate.
779 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
781 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
782 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
783 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
784 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
786 (LIBOPCODES_CFILES): New variable, adding to
787 TARGET_LIBOPCODES_CFILES also non-target library sources.
788 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
790 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
791 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
792 * Makefile.in: Regenerate.
793 * po/POTFILES.in: Regenerate.
795 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
797 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
798 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
799 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
800 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
801 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
802 is built shared even if it is not to be installed.
803 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
804 (install_libopcodes, uninstall_libopcodes): Remove.
805 (AM_CPPFLAGS): Renamed from ...
806 (INCLUDES): ... this.
807 * Makefile.in: Regenerate.
809 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
810 1.11, foreign, no-dist.
811 (MKDEP, m32c_opc_h): Remove variables.
812 (disassemble.lo): Rewrite using automake-style dependency
813 tracking rules; only list the dependency upon the primary source
814 file, but no included headers.
815 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
816 (i386-gen.o, ia64-gen.o): Remove dependency statements.
817 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
818 ensure all dependency fragments are included in the Makefile.
819 (s390-opc.lo): Depend on s390-opc.tab.
820 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
821 (mkdep section): Remove.
822 * Makefile.in: Regenerate.
823 * po/POTFILES.in: Regenerate.
825 * Makefile.am (install-pdf, install-html): Remove.
826 * Makefile.in: Regenerate.
828 * Makefile.in: Regenerate.
829 * aclocal.m4: Likewise.
830 * config.in: Likewise.
831 * configure: Likewise.
833 2009-08-06 Michael Eager <eager@eagercon.com>
835 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
836 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
837 * Makefile.in: Regenerate.
838 * configure.in: Add bfd_microblaze_arch target.
839 * configure: Regenerate.
840 * disassemble.c: Define ARCH_microblaze, return
841 print_insn_microblaze().
842 * microblaze-dis.c: New MicroBlaze disassembler.
843 * microblaze-opc.h: New MicroBlaze opcode definitions.
844 * microblaze-opcm.h: New MicroBlaze opcode types.
846 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
848 * configure.in: Handle bfd_l1om_arch.
849 * disassemble.c (disassembler): Likewise.
851 * configure: Regenerated.
853 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
854 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
856 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
858 (cpu_flags): Add CpuL1OM.
859 (set_bitfield): Take an argument to set the value field.
860 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
861 (process_i386_opcode_modifier): Updated.
862 (process_i386_operand_type): Likewise.
863 * i386-init.h: Regenerated.
864 * i386-tbl.h: Likewise.
866 * i386-opc.h (CpuL1OM): New.
868 (i386_cpu_flags): Add cpul1om.
870 2009-07-24 Jan Beulich <jbeulich@novell.com>
872 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
874 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
875 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
876 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
877 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
879 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
881 * i386-opc.tbl: Qualify floating point instructions by their
882 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
883 and fsincos to be avilable only on 387. Fix fstsw ax to be
884 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
886 * i386-init.h, i386-tbl.h: Regenerate.
888 2009-07-20 Nick Clifton <nickc@redhat.com>
891 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
892 offset or indexed based addressing mode 3.
894 2009-07-14 Nick Clifton <nickc@redhat.com>
897 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
899 (arm_decode_shift): Catch illegal register based shifts.
900 (print_insn_arm): Properly handle negative register r0
901 post-indexed addressing.
903 2009-07-10 Doug Kwan <dougkwan@google.com>
905 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
906 lower 32 bits of long types to make hexadecimal output consistent
907 on both 32-bit and 64-bit hosts.
909 2009-07-10 Alan Modra <amodra@bigpond.net.au>
911 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
912 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
913 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
914 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
915 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
916 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
917 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
918 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
919 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
920 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
921 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
922 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
924 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
926 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
928 2009-07-07 Nick Clifton <nickc@redhat.com>
931 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
934 2009-07-06 DJ Delorie <dj@redhat.com>
936 * mep-desc.c: Regenerate.
937 * mep-desc.h: Regenerate.
938 * mep-opc.c: Regenerate.
939 * mep-opc.h: Regenerate.
941 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
943 * i386-opc.h (CpuFMA4): Add CpuFMA4.
944 (i386_cpu_flags): New.
945 * i386-gen.c: Add CPU_FMA4_FLAGS.
946 * i386-opc.tbl: Add FMA4 instructions.
947 * i386-tbl.h: Regenerate.
948 * i386-init.h: Regenerate.
949 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
950 (OP_XMM_VexW): Ditto.
952 (VEXI4_Fixup): Ditto.
953 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
954 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
955 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
956 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
957 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
958 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
959 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
960 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
961 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
962 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
963 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
964 (get_vex_imm8): New. handle FMA4.
965 (OP_EX_VexReg): Ditto.
967 2009-06-30 Nick Clifton <nickc@redhat.com>
970 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
971 LFM and SFM instructions as comments,.
972 Improve consistency of formatting for instructions displayed as
973 comments and decimal values displayed with their hexadecimal
977 2009-06-29 Nick Clifton <nickc@redhat.com>
980 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
981 boundary between variaant and generic coprocessor instuctions.
982 (coprocessor): Use it.
983 Fix architecture version of MCRR and MRRC instructions.
984 (arm_opcdes): Fix patterns for STRB and STRH instructions.
985 (print_insn_coprocessor): Check architecture and extension masks.
986 Print a hexadecimal version of any decimal constant that is
987 outside of the range of -16 to +32.
988 (print_arm_address): Add a return value of the offset used in the
989 adress, if it is worth printing a hexadecimal version of it.
990 (print_insn_neon): Print a hexadecimal version of any decimal
991 constant that is outside of the range of -16 to +32.
992 (print_insn_arm): Likewise.
993 (print_insn_thumb16): Likewise.
994 (print_insn_thumb32): Likewise.
997 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
998 of an undefined instruction.
999 (arm_opcodes): Use it.
1000 (thumb_opcod): Use it.
1001 (thumb32_opc): Use it.
1003 2009-06-23 DJ Delorie <dj@redhat.com>
1005 * mep-desc.c: Regenerate.
1006 * mep-desc.h: Regenerate.
1007 * mep-dis.c: Regenerate.
1008 * mep-ibld.c: Regenerate.
1009 * mep-opc.c: Regenerate.
1011 * mep-asm.c: Regenerate.
1012 * mep-opc.c: Regenerate.
1013 * mep-opc.h: Regenerate.
1015 2009-06-22 Nick Clifton <nickc@redhat.com>
1017 * po/fi.po: Updated Finish translation.
1019 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1021 * m32c-asm.c: Regenerate.
1023 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1025 * score-dis.c (print_insn_score48, print_insn_score32): Move default
1026 case label to proper lexical block.
1027 * score7-dis.c (print_insn_score32): Likewise.
1029 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
1031 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
1032 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
1033 * s390-opc.txt (nopr, nop): Use new instruction format.
1035 2009-06-18 Nick Clifton <nickc@redhat.com>
1038 * arm-dis.c (print_insn_coprocessor): Check that a user specified
1039 ARM architecture supports the matched instruction.
1040 (print_insn_arm): Likewise.
1041 (select_arm_features): New function. Fills in the fields of an
1042 arm_feature_set structure based on a given arm machine number.
1043 (print_insn): Initialise an arm_feature_set structure.
1045 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
1047 * vax-dis.c (is_function_entry): Return success for synthetic
1049 (is_plt_tail): New function.
1050 (print_insn_vax): Decode PLT entry offset longword.
1052 2009-06-15 Nick Clifton <nickc@redhat.com>
1055 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
1059 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
1061 2009-06-15 Nick Clifton <nickc@redhat.com>
1064 * arm-dis.c (print_insn): Ignore is_data if the user has requested
1065 the disassembly of data as well as instructions.
1067 2009-06-11 Doug Evans <dje@sebabeach.org>
1069 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
1071 2009-06-11 Anthony Green <green@moxielogic.com>
1073 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
1074 (moxie_form3_opc_info): Add branch instructions.
1075 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
1076 encoded instructions.
1078 2009-06-06 Anthony Green <green@moxielogic.com>
1080 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
1081 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
1083 2009-06-04 Alan Modra <amodra@bigpond.net.au>
1085 * dep-in.sed: Don't use \n in replacement part of s command.
1086 * Makefile.am (DEP1): LC_ALL for uniq.
1087 * Makefile.in: Regenerate.
1089 2009-06-02 Nick Clifton <nickc@redhat.com>
1091 * po/nl.po: Updated Dutch translation.
1093 2009-06-02 Tristan Gingold <gingold@adacore.com>
1095 * ia64-gen.c (parse_resource_users, print_dependency_table,
1096 add_dis_table_ent, finish_distable, insert_bit_table_ent,
1097 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
1098 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
1099 insert_completer_entry, print_completer_entry, print_completer_table,
1100 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
1102 2009-05-28 DJ Delorie <dj@redhat.com>
1104 * mep-asm.c: Regenerate.
1105 * mep-desc.c: Regenerate.
1107 2009-05-26 DJ Delorie <dj@redhat.com>
1109 * mep-asm.c: Regenerate.
1110 * mep-desc.c: Regenerate.
1111 * mep-desc.h: Regenerate.
1112 * mep-dis.c: Regenerate.
1113 * mep-ibld.c: Regenerate.
1114 * mep-opc.c: Regenerate.
1115 * mep-opc.h: Regenerate.
1117 2009-05-26 Nick Clifton <nickc@redhat.com>
1119 * po/id.po: Updated Indonesian translation.
1120 * po/opcodes.pot: Updated template file.
1122 2009-05-26 Alan Modra <amodra@bigpond.net.au>
1124 * dep-in.sed: Don't modify .o to .lo here. Output one filename
1125 per line with all lines having continuation backslash. Prefix
1126 first line with "A", following lines with "B".
1127 * Makefile.am (DEP): Don't use dep.sed here.
1128 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
1129 dep.sed here on dependencies, sort and uniq.
1130 * Makefile.in: Regenerate.
1132 2009-05-25 Tristan Gingold <gingold@adacore.com>
1134 * makefile.vms (OPT): New variable.
1135 (CFLAGS): Update compilation flags.
1137 2009-05-22 DJ Delorie <dj@redhat.com>
1139 * mep-asm.c: Regenerate.
1140 * mep-desc.c: Regenerate.
1141 * mep-desc.h: Regenerate.
1142 * mep-dis.c: Regenerate.
1143 * mep-ibld.c: Regenerate.
1144 * mep-opc.c: Regenerate.
1145 * mep-opc.h: Regenerate.
1147 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
1149 * i386-opc.h (Cpusse5): Delete.
1150 (i386_cpu_flags): Delete.
1151 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
1152 * i386-opc.tbl: Remove SSE5 instructions.
1153 * i386-tbl.h: Regenerate.
1154 * i386-init.h: Regenerate.
1155 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
1156 (print_drex_arg): Delete.
1159 (OP_DREX_ICMP): Delete.
1160 (OP_DREX_FCMP): Delete.
1162 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
1164 2009-05-22 Alan Modra <amodra@bigpond.net.au>
1166 * Makefile.am: Run "make dep-am".
1167 * Makefile.in: Regenerate.
1168 * po/POTFILES.in: Regenerate.
1170 2009-05-19 DJ Delorie <dj@redhat.com>
1172 * mep-asm.c: Regenerate.
1173 * mep-opc.c: Regenerate.
1175 2009-04-30 DJ Delorie <dj@redhat.com>
1177 * mep-asm.c: Regenerate.
1178 * mep-desc.c: Regenerate.
1179 * mep-desc.h: Regenerate.
1180 * mep-dis.c: Regenerate.
1181 * mep-ibld.c: Regenerate.
1182 * mep-opc.c: Regenerate.
1183 * mep-opc.h: Regenerate.
1185 2009-04-17 DJ Delorie <dj@redhat.com
1187 * mep-desc.c: Regenerate.
1188 * mep-ibld.c: Regenerate.
1189 * mep-opc.c: Regenerate.
1190 * mep-opc.h: Regenerate.
1192 2009-04-15 Anthony Green <green@moxielogic.com>
1194 * moxie-opc.c, moxie-dis.c: Created.
1195 * Makefile.am: Build the moxie source files.
1196 * configure.in: Add moxie support.
1197 * Makefile.in, configure: Rebuilt.
1198 * disassemble.c (disassembler): Add moxie support.
1199 (ARCH_moxie): Define.
1201 2009-04-15 Jan Beulich <jbeulich@novell.com>
1203 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1205 (pshab, pshaw, pshad, pshaq): Likewise.
1206 * i386-tbl.h: Re-generate.
1208 2009-04-08 DJ Delorie <dj@redhat.com
1210 * mep-asm.c: Regenerate.
1211 * mep-desc.c: Regenerate.
1212 * mep-desc.h: Regenerate.
1213 * mep-dis.c: Regenerate.
1214 * mep-ibld.c: Regenerate.
1215 * mep-opc.c: Regenerate.
1216 * mep-opc.h: Regenerate.
1218 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
1220 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1221 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1222 Reorder entries so the extended mnemonics are listed before tlbilx.
1224 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
1226 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1228 (print_insn_powerpc): Make sure we only deprecate instructions using
1229 the original dialect and not a modified dialect due to -Many handling.
1230 Move the handling of the condition register and default operands to
1231 the end of the if/else if/else chain.
1232 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1233 instructions from newer processors are listed before older ones.
1234 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1235 that have instructions with conflicting opcodes.
1237 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
1239 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1242 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
1244 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1246 2009-03-30 Joseph Myers <joseph@codesourcery.com>
1248 * arm-dis.c (print_insn): Also check section matches in backwards
1249 search for mapping symbol.
1251 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
1253 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1255 2009-03-18 Alan Modra <amodra@bigpond.net.au>
1257 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1258 * Makefile.am: Run "make dep-am".
1259 * Makefile.in: Regenerate.
1260 * openrisc-opc.c: Regenerate.
1262 2009-03-10 Nick Clifton <nickc@redhat.com>
1264 * po/id.po: Updated Indonesian translation.
1266 2009-03-10 Alan Modra <amodra@bigpond.net.au>
1268 * ppc-dis.c: Include "opintl.h".
1269 (struct ppc_mopt, ppc_opts): New.
1270 (ppc_parse_cpu): New function.
1271 (powerpc_init_dialect): Use it.
1272 (print_ppc_disassembler_options): Dump options from ppc_opts.
1273 Internationalize message.
1275 2009-03-06 Nick Clifton <nickc@redhat.com>
1277 * po/es.po: Updated Spanish translation.
1279 2009-03-04 Alan Modra <amodra@bigpond.net.au>
1282 * configure.in: Test for ld --as-needed support. Link shared
1283 libopcodes against libm.
1284 * configure: Regenerate.
1286 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
1288 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1289 instructions from newer processors are listed before older ones.
1291 2009-03-03 Alan Modra <amodra@bigpond.net.au>
1293 * Makefile.am: Run "make dep-am".
1294 (HFILES): Move lm32-desc.h and lm32-opc.h from..
1296 * Makefile.in: Regenerate.
1298 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
1300 * score7-dis.c: New file.
1301 * Makefile.am: Add dependencies for score7-dis.c.
1302 * Makefile.in: Regenerate.
1303 * configure.in: Add score7-dis to score files.
1304 * configure: Regenerate.
1305 * score-dis.c: Add support for score7 architecture.
1306 * score-opc.h: Likewise.
1308 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1310 * configure: Regenerate.
1312 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
1314 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1316 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
1318 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1319 the power7 and the isel instructions.
1320 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1321 (insert_dm, extract_dm): Likewise.
1322 (XB6): Update comment to include XX2 form.
1323 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1324 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1325 (RemoveXX3DM): Delete.
1326 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1327 "mftgpr">: Deprecate for POWER7.
1328 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1329 "frsqrte.">: Deprecate the three operand form and enable the two
1330 operand form for POWER7 and later.
1331 <"wait">: Extend to accept optional parameter. Enable for POWER7.
1332 <"waitsrv", "waitimpl">: Add extended opcodes.
1333 <"ldbrx", "stdbrx">: Enable for POWER7.
1334 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1335 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1336 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1337 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1338 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1339 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1340 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1341 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1342 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1343 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1344 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1345 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1346 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1347 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1348 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1349 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1350 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1351 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1352 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1353 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1354 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1355 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1356 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1357 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1358 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1359 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1360 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1361 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1362 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1363 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1364 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1365 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1366 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1367 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1368 "xxspltw", "xxswapd">: Add VSX opcodes.
1370 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
1372 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1373 (operand_types): Remove Vex_Imm4.
1375 * i386-opc.h (Vex_Imm4): Removed.
1377 (i386_operand_type): Remove vex_imm4.
1379 * i386-opc.tbl: Remove Vex_Imm4 comments.
1380 * i386-init.h: Regenerated.
1381 * i386-tbl.h: Likewise.
1383 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
1385 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1386 vq{r}shr{u}n.s64 insnstructions.
1388 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
1390 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1391 operand to be a float point register (FRT/FRS).
1393 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
1395 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1396 dmfc2 and dmtc2 before the architecture-level variants.
1398 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1400 * fr30-opc.c: Regenerate.
1401 * frv-opc.c: Regenerate.
1402 * ip2k-opc.c: Regenerate.
1403 * iq2000-opc.c: Regenerate.
1404 * lm32-opc.c: Regenerate.
1405 * m32c-opc.c: Regenerate.
1406 * m32r-opc.c: Regenerate.
1407 * mep-opc.c: Regenerate.
1408 * mt-opc.c: Regenerate.
1409 * xc16x-opc.c: Regenerate.
1410 * xstormy16-opc.c: Regenerate.
1411 * tic54x-dis.c (print_instruction): Avoid compiler warning on
1414 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
1416 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1418 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
1420 * ppc-opc.c: Update copyright year.
1421 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1422 ordering for POWER4 and later and use the correct Server ordering.
1424 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
1426 AVX Programming Reference (January, 2009)
1427 * i386-dis.c (PREFIX_VEX_3A44): New.
1428 (VEX_LEN_3A44_P_2): Likewise.
1429 (PREFIX_VEX_3A48): Updated.
1430 (VEX_LEN_3A4C_P_2): Likewise.
1431 (prefix_table): Add PREFIX_VEX_3A44.
1432 (vex_table): Likewise.
1433 (vex_len_table): Add VEX_LEN_3A44_P_2.
1435 * i386-opc.tbl: Add PCLMUL + AVX instructions.
1436 * i386-tbl.h: Regenerated.
1438 2009-02-03 Sandip Matte <sandip@rmicorp.com>
1440 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1441 (mips_arch_choices): Add XLR entry.
1442 * mips-opc.c (XLR): Define.
1443 (mips_builtin_opcodes): Add XLR instructions.
1445 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
1447 * Makefile.am: Add install-pdf target.
1448 * po/Make-in: Add install-pdf target.
1449 * Makefile.in: Regenerate.
1451 2009-02-02 DJ Delorie <dj@redhat.com>
1453 * mep-asm.c: Regenerate.
1454 * mep-desc.c: Regenerate.
1455 * mep-desc.h: Regenerate.
1456 * mep-dis.c: Regenerate.
1457 * mep-ibld.c: Regenerate.
1458 * mep-opc.c: Regenerate.
1459 * mep-opc.h: Regenerate.
1461 2009-01-29 Mark Mitchell <mark@codesourcery.com>
1463 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1466 2009-01-28 Chao-ying Fu <fu@mips.com>
1468 * mips-opc.c (suxc1): Add the flag of FP_D.
1470 2009-01-20 Alan Modra <amodra@bigpond.net.au>
1472 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1473 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1474 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1475 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1476 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1477 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1478 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1479 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1481 2009-01-16 Alan Modra <amodra@bigpond.net.au>
1483 * configure.in (commonbfdlib): Delete.
1484 (SHARED_LIBADD): Add pic libiberty if such is available.
1485 * configure: Regenerate.
1486 * po/POTFILES.in: Regenerate.
1488 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1490 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1491 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1492 operand form and enable the four operand form for POWER6 and later.
1493 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1494 three operand form for POWER6 and later.
1496 2009-01-14 Mike Frysinger <vapier@gentoo.org>
1498 * bfin-dis.c (OUTS): Use "%s" as format string.
1500 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1502 * i386-gen.c (cpu_flag_init): Remove a white space.
1503 (operand_type_init): Likewise.
1505 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1507 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1508 * i386-tbl.h: Regenerated.
1510 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1512 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1513 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1514 subS, xorS and cmpS.
1516 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1518 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1519 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1520 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1521 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1524 (set_bitfield): Take an argument, lineno. Don't report lineno
1525 on error if it is -1.
1526 (process_i386_cpu_flag): Take an argument, lineno.
1527 (process_i386_opcode_modifier): Likewise.
1528 (process_i386_operand_type): Likewise.
1529 (output_i386_opcode): Likewise.
1530 (opcode_hash_entry): Add lineno.
1531 (process_i386_opcodes): Updated.
1532 (process_i386_registers): Likewise.
1533 (process_i386_initializers): Likewise.
1535 * i386-opc.h (CpuP4): Removed.
1539 (CpuSYSCALL): Likewise.
1541 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1542 cpuclflush and cpusyscall.
1544 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1546 * i386-init.h: Regenerated.
1547 * i386-tbl.h: Likewise.
1549 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1551 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1552 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1553 (cpu_flags): Add CpuRdtscp.
1554 (set_bitfield): Remove CpuSledgehammer check.
1556 * i386-opc.h (CpuRdtscp): New.
1558 (i386_cpu_flags): Add cpurdtscp.
1560 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1561 * i386-init.h: Regenerated.
1562 * i386-tbl.h: Likewise.
1564 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1566 * ppc-opc.c (PPCNONE): Define.
1568 (powerpc_opcodes): Initialize the new "deprecated" field.
1570 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1572 AVX Programming Reference (December, 2008)
1573 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1574 (VEX_LEN_E7_P_2_M_0): Likewise.
1575 (VEX_LEN_2C_P_1): Updated.
1576 (VEX_LEN_E8_P_2): Likewise.
1577 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1578 (mod_table): Likewise.
1580 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1581 * i386-tbl.h: Regenerated.
1583 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1585 * i386-gen.c (process_copyright): Update for 2009.
1587 * i386-init.h: Regenerated.
1588 * i386-tbl.h: Likewise.
1590 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1592 AVX Programming Reference (December, 2008)
1593 * i386-dis.c (OP_VEX_FMA): Removed.
1594 (OP_EX_VexW): Likewise.
1595 (OP_EX_VexImmW): Likewise.
1596 (OP_XMM_VexW): Likewise.
1597 (VEXI4_Fixup): Likewise.
1598 (VPERMIL2_Fixup): Likewise.
1601 (Vex128FMA): Likewise.
1603 (EXdVexW): Likewise.
1604 (EXqVexW): Likewise.
1605 (EXVexImmW): Likewise.
1607 (VPERMIL2): Likewise.
1608 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1609 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1610 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1611 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1612 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1613 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1614 (get_vex_imm8): Likewise.
1615 (OP_EX_VexReg): Likewise.
1616 vpermil2_op): Likewise.
1618 (vex_w_dq_mode): Likewise.
1619 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1620 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1621 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1623 (PREFIX_VEX_38DB): Likewise.
1624 (PREFIX_VEX_3A4A): Likewise.
1625 (PREFIX_VEX_3A60): Likewise.
1626 (PREFIX_VEX_3ADF): Likewise.
1627 (VEX_LEN_3ADF_P_2): Likewise.
1628 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1629 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1630 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1631 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1632 PREFIX_VEX_3896...PREFIX_VEX_389F,
1633 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1634 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1635 (vex_table): Likewise.
1636 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1637 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1638 (putop): Support "%XW".
1639 (intel_operand_size): Handle vex_w_dq_mode.
1641 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1643 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1644 instructions. Add new FMA instructions.
1645 * i386-tbl.h: Regenerated.
1647 2009-01-02 Matthias Klose <doko@ubuntu.com>
1649 * or32-opc.c (or32_print_register, or32_print_immediate,
1650 disassemble_insn): Don't rely on undefined sprintf behaviour.
1652 For older changes see ChangeLog-2008
1658 version-control: never