1 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
3 * v850-opc.c (extract_d22): Use signed arithmatic.
5 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
7 * mips-opc.c: Three op mult is not an ISA insn.
9 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
11 * mips-opc.c: Fix formatting.
13 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
15 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
16 than assuming that char is signed. Explicitly sign extend 16 bit
17 values, rather than assuming that short is 16 bits.
18 (OP_sI, OP_J, OP_DIR): Likewise.
21 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
23 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
27 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
29 * v850-opc.c: Fix typo in comment.
31 * v850-dis.c (disassemble): Add test of processor type when
34 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
36 * configure.in: Use a diversion to set enable_shared before the
40 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
42 * m68k-opc.c (TBL1): Use ! rather than `.
43 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
45 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
47 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
49 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
51 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
54 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
55 * aclocal.m4: Rebuild with new libtool.
59 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
61 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
64 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
66 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
68 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
70 * v850-opc.c (v850_opcodes): Further rearrangements.
73 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
75 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
78 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
80 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
83 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
85 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
87 * mips16-opc.c: Added mips16 sdbbp.
90 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
92 * v850-opc.c: Initialise processors field of v850_opcode structure.
95 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
97 Merge changes from Martin Hunt:
99 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
101 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
102 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
103 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
105 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
107 * d30v-dis.c (print_insn): First operand of d*i (delayed
108 branch) instructions is relative.
110 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
111 (d30v_operand_table): Add IMM6S3 type.
112 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
114 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
115 and cmp instructions.
117 * d30v-opc.c: Correct entries for repeat*, and sat*.
118 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
119 types. Correct several formats.
121 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
123 * d30v-opc.c (pre_defined_registers): Change control registers.
125 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
126 SHORT_C2. Manual was incorrect.
128 * d30v-dis.c (lookup_opcode): Return value now indicates
129 if an opcode has a short and a long form. Used for deciding
130 to append a ".s" or ".l".
131 (print_insn): Append a ".s" to an instruction if it is
132 the short form and ".l" if it is a long form. Do not append
133 anything if the instruction has only one possible size.
135 * d30v-opc.c: Change mulx2h to require an even register.
136 New form: SHORT_A2; a SHORT_A form that needs an even
137 register as the first operand.
139 * d30v-dis.c (print_insn_d30v): Fix problem where the last
140 instruction was not being disassembled if there were an odd
141 number of instructions.
143 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
147 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
149 * v850-dis.c (disassemble): Improved display of register lists.
152 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
154 * sparc-opc.c (sparc_opcodes): Fix assembler args to
155 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
156 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
157 fandnot1s, fandnot2s.
159 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
161 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
163 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
165 * cgen-asm.c (cgen_parse_address): New argument resultp.
167 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
169 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
171 * mn10200-dis.c (disassemble): PC relative instructions are
172 relative to the next instruction, not the current instruction.
174 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
176 * v850-dis.c (disassemble): Only signed extend values that are not
177 returned by extract functions.
178 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
180 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
182 * v850-opc.c: Update comments. Remove use of
183 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
185 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
187 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
189 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
191 * configure: Rebuilt with latest devo autoconf for NT support.
193 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
195 * v850-dis.c (disassemble): Use curly brace syntax for register
198 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
199 where r0 is being used as a destination register.
202 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
204 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
208 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
210 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
211 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
212 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
213 Add insns to access SGR and DBR.
214 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
217 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
219 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
222 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
224 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
225 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
228 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
230 * configure (cgen_files): Add support for v850e target.
231 * configure.in (cgen_files): Add support for v850e target.
233 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
235 * configure (cgen_files): Add support for v850eq target.
236 * configure.in (cgen_files): Add support for v850eq target.
239 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
241 * configure.in (bfd_arc_arch): Add.
242 * configure: Rebuild.
243 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
244 * Makefile.in: Rebuild.
245 * arc-dis.c, arc-opc.c: New files.
246 * disassemble.c (ARCH_all): Define ARCH_arc.
247 (disassembler): Add ARC support.
249 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
252 * v850-dis.c (disassemble): Add support for v850EQ instructions.
254 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
255 (v850_opcodes): Add v850EQ instructions.
257 * v850-dis.c (disassemble): Add support for v850E instructions.
259 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
260 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
261 insert_spe, extract_spe): New Functions.
262 (v850_opcodes): Add v850E instructions.
265 * v850-opc.c: Reorganised and re-layed out to improve readability
268 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
270 * configure: Rebuild with autoconf 2.12.1.
272 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
274 * aclocal.m4, configure: Rebuild with new automake patches.
276 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
278 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
279 * acinclude.m4: Just include acinclude.m4 from BFD.
280 * aclocal.m4, configure: Rebuild.
282 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
284 * Makefile.am: New file, based on old Makefile.in.
285 * acconfig.h: New file.
286 * acinclude.m4: New file.
287 * stamp-h.in: New file.
288 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
289 Removed shared library handling; now handled by libtool. Replace
290 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
291 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
292 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
293 handling in AC_OUTPUT.
294 * dep-in.sed: Change .o to .lo.
295 * Makefile.in: Now built with automake.
296 * aclocal.m4: Now built with aclocal.
297 * config.in, configure: Rebuild.
299 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
301 * mips-opc.c: Fix typo/thinko in "eret" instruction.
304 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
306 * mips-opc.c: Fix coding of mtsa.
309 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
311 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
313 * sparc-dis.c (sorted_opcodes): New static local.
314 (struct opcode_hash): `opcode' is pointer to const element.
315 (build_hash): First arg is now table of sorted pointers.
316 (print_insn_sparc): Sort opcodes by sorting table of pointers.
317 (compare_opcodes): Update.
319 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
321 * cgen-opc.c: #include <ctype.h>.
322 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
323 Handle case insensitive hashing.
324 (hash_keyword_value): Change type of `value' to unsigned int.
326 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
328 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
329 precision FP, mark it as such. Likewise for double precision
330 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
333 (mips_builtin_opcodes): Remove non-existant r5900 instructions
337 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
339 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
340 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
343 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
345 * ppc-opc.c (extract_nsi): make unsigned expression signed before
347 (UNUSED): remove one level of parens, so MSVC doesn't choke on
348 nesting depth when all the macros are expanded.
350 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
352 * sparc-opc.c: The fcmp v9a instructions take an integer register
353 as a destination, not a floating point register. From Christian
354 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
356 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
358 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
359 syntax. From Roman Hodek
360 <rnhodek@faui22c.informatik.uni-erlangen.de>.
362 * i386-dis.c (twobyte_has_modrm): Fix pand.
364 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
366 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
368 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
370 * arm-dis.c: Add prototypes for arm_decode_shift and
373 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
375 * mips-opc.c: Add r3900 insns.
377 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
379 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
380 print delay slot instructions on the same line. When using a PC
381 relative load, add a comment with the value being loaded if it can
384 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
386 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
387 to pushS/popS for segment regs and byte constant so that
388 pushw/popw printed when in 16 bit data mode.
390 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
391 print cbtw, cwtd in 16 bit data mode.
392 * i386-dis.c (putop): extra case W to support above.
394 * i386-dis.c (print_insn_x86): print addr32 prefix when given
395 address size prefix in 16 bit address mode.
397 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
399 * sh-dis.c: Reindent. Rename local variable fprintf to
402 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
404 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
406 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
408 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
410 * mips16-opc.c (mip16_opcodes): same.
412 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
414 * m68k-opc.c (moveb): Change $d to %d.
416 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
418 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
419 (twobyte_has_modrm): Likewise.
421 (OP_MMX, OP_EM, OP_MS): New static functions.
423 * i386-dis.c: Revert patch of April 4. The output now matches
426 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
428 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
431 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
433 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
435 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
437 * Makefile.in (install): Depend upon installdirs.
438 (installdirs): New target.
440 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
442 From Thomas Graichen <graichen@rzpd.de>:
443 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
444 * configure: Rebuild.
446 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
448 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
449 Delete string{,s}.h support.
451 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
453 * cgen-asm.c (cgen_parse_operand_fn): New global.
454 (cgen_parse_{{,un}signed_integer,address}): Update call to
455 cgen_parse_operand_fn.
456 (cgen_init_parse_operand): New function.
457 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
458 from cgen_asm_init_parse.
459 (m32r_cgen_assemble_insn): New operand `errmsg'.
460 Delete call to as_bad, return error message to caller.
461 (m32r_cgen_asm_hash_keywords): #if 0 out.
463 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
465 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
467 [case 'J']: Fix typo in register name.
469 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
471 * configure.in: Substitute SHLIB_LIBS.
472 * configure: Rebuild.
473 * Makefile.in (SHLIB_LIBS): New variable.
474 ($(SHLIB)): Use $(SHLIB_LIBS).
476 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
478 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
480 * cgen-opc.c (hash_keyword_name): Improve algorithm.
482 * disassemble.c (disassembler): Handle m32r.
484 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
486 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
487 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
488 * Makefile.in (CFILES): Add them.
489 (ALL_MACHINES): Add them.
490 (dependencies): Regenerate.
491 * configure.in (cgen_files): New variable.
492 (bfd_m32r_arch): Add entry.
493 * configure: Regenerate.
495 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
497 * configure.in: Correct file names for bfd_mn10[23]00_arch.
498 * configure: Rebuild.
500 * Makefile.in: Rebuild dependencies.
502 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
504 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
507 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
509 * Branched binutils 2.8.
511 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
513 * m10200-dis.c: Rename from mn10200-dis.c.
514 * m10200-opc.c: Rename from mn10200-opc.c.
515 * m10300-dis.c: Rename from mn10300-dis.c
516 * m10300-opc.c: Rename from mn10300-opc.c.
517 * Makefile.in: Update accordingly.
519 * mips16-opc.c: Add mul and dmul macros.
521 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
523 * makefile.vms: Update CFLAGS, add clean target.
525 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
527 * mips-opc.c: Add "wait". From Ralf Baechle
528 <ralf@gnu.ai.mit.edu>.
530 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
531 * configure, config.in: Rebuild.
532 * sysdep.h: Include <stdlib.h> if it exists.
533 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
535 * Makefile.in: Rebuild dependencies.
537 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
539 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
540 Andrew Bray <andy@madhouse.demon.co.uk>.
542 * mips-opc.c: Add cast when setting mips_opcodes.
544 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
546 * v850-dis.c (disassemble): Fix sign extension problem.
547 * v850-opc.c (extract_d*): Fix sign extension problems to make
548 disassembly calculate branch offsets correctly.
550 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
552 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
554 * mips-opc.c: Add dctr and dctw.
557 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
559 * d30v-dis.c (print_insn): Change the way signed constants
562 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
564 * Makefile.in (BFD_H): New variable.
565 (HFILES): New variable.
566 (CFILES): Add all C files.
567 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
568 Delete old dependencies, and build new ones.
569 * dep-in.sed: New file.
571 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
573 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
575 start-sanitize-coldfire
576 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
578 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
581 end-sanitize-coldfire
582 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
584 * mn10200-opc.c: Change "trap" to "syscall".
585 * mn10300-opc.c: Add new "syscall" instruction.
587 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
589 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
590 mulul insns on the coldfire.
592 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
594 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
595 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
596 (print_insn_little_arm): Likewise.
598 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
600 Based on patches from H.J. Lu <hjl@lucon.org>:
601 * i386-dis.c (fetch_data): Add prototype.
602 * m68k-dis.c (fetch_data): Add prototype.
603 (dummy_print_address): Add prototype. Make static.
604 * ppc-opc.c (valid_bo): Add prototype.
605 * sparc-dis.c (build_hash_table): Add prototype.
606 (is_delayed_branch, compute_arch_mask): Add prototypes.
607 (print_insn_sparc): Make several local variables const.
608 (compare_opcodes): Change arguments to const PTR. Add prototype.
609 * sparc-opc.c (arg): Change name field to be const.
610 (lookup_name, lookup_value): Add prototypes. Change table and
611 name parameters to be const.
612 (sparc_encode_asi): Change name parameter to be const.
613 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
614 (sparc_encode_sparclet_cpreg): Likewise.
615 (sparc_decode_asi): Change return type to be const.
616 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
617 (sparc_decode_sparclet_cpreg): Likewise.
619 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
621 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
622 Solaris doesn't like the combined options, and the -f is
624 (stamp-tshlink, install): Likewise.
626 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
628 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
631 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
633 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
635 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
637 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
640 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
642 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
645 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
647 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
649 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
651 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
654 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
656 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
657 floatformat_to_double to make portable.
658 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
661 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
663 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
664 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
666 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
668 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
669 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
672 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
674 * tic80-opc.c (LSI_SCALED): Renamed from this ...
675 (OFF_SL_BR_SCALED): ... to this, and added the flag
676 TIC80_OPERAND_BASEREL to the flags word.
677 (tic80_opcodes): Replace all occurances of LSI_SCALED with
681 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
683 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
684 Change mips_opcodes from const array to a pointer,
685 and change bfd_mips_num_opcodes from const int to int,
686 so that we can increase the size of the mips opcodes table
690 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
692 * tic80-opc.c (tic80_predefined_symbols): Revert change to
693 store BITNUM values in the table in one's complement form
694 to match behavior when assembler is given a raw numeric
695 value for a BITNUM operand.
696 * tic80-dis.c (print_operand_bitnum): Ditto.
700 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
702 * d30v-opc.c: Removed references to FLAG_X.
705 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
707 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
710 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
712 * Makefile.in: Added d30v object files.
713 * configure: (bfd_d30v_arch) Rebuilt.
714 * configure.in: (bfd_d30v_arch) Added new case.
715 * d30v-dis.c: New file.
716 * d30v-opc.c: New file.
717 * disassemble.c (disassembler) Add entry for d30v.
721 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
723 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
724 representations for the floating point BITNUM values.
726 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
728 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
729 in the table in one's complement form, as they appear in the
731 (tic80_symbol_to_value): Use macros to access predefined
733 (tic80_value_to_symbol): Ditto.
734 (tic80_next_predefined_symbol): New function.
735 * tic80-dis.c (print_operand_bitnum): Remove code that did
736 one's complement for BITNUM values.
740 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
742 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
745 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
747 * makefile.vms: Remove 8 bit characters. Update to latest
750 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
752 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
754 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
756 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
757 (IMM24_PCREL): Likewise.
759 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
761 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
762 address for an extended PC relative instruction that is not a
765 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
767 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
771 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
773 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
774 (tic80_opcodes): Sort entries so that long immediate forms
775 come after short immediate forms, making it easier for
776 assembler to select the right one for a given operand.
779 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
781 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
783 (print_insn_mips16): Likewise.
786 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
788 * mips-opc.c: add r5900.
792 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
794 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
795 a symbol class that restricts translation to just that
796 class (general register, condition code, etc).
798 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
800 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
801 and REG_DEST_E for register operands that have to be
802 an even numbered register. Add REG_FPA for operands that
803 are one of the floating point accumulator registers.
804 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
805 (tic80_opcodes): Change entries that need even numbered
806 register operands to use the new operand table entries.
807 Add "or" entries that are identical to "or.tt" entries.
810 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
812 * mips16-opc.c: Add new cases of exit instruction for
814 * mips-dis.c (print_mips16_insn_arg): Display floating point
815 registers in operands of exit instruction. Print `$' before
816 register names in operands of entry and exit instructions.
819 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
821 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
822 pairs for all predefined symbols recognized by the assembler.
823 Also used by the disassembling routines.
824 (tic80_symbol_to_value): New function.
825 (tic80_value_to_symbol): New function.
826 * tic80-dis.c (print_operand_control_register,
827 print_operand_condition_code, print_operand_bitnum):
828 Remove private tables and use tic80_value_to_symbol function.
831 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
833 * d10v-dis.c (print_operand): Change address printing
834 to correctly handle PC wrapping. Fixes PR11490.
836 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
838 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
841 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
843 * mips-dis.c (print_insn_mips16): Set insn_info information.
844 (print_mips16_insn_arg): Likewise.
846 * mips-dis.c (print_insn_mips16): Better handling of an extend
847 opcode followed by an instruction which can not be extended.
849 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
851 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
852 coldfire moveb instruction to not allow an address register as
853 destination. Although the documentation does not indicate that
854 this is invalid, experiments uncovered unexpected behavior.
855 Added a comment explaining the situation. Thanks to Andreas
856 Schwab for pointing this out to me.
859 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
861 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
862 entries are presorted so that entries with the same mnemonic are
863 adjacent to each other in the table. Sort the entries for each
864 instruction so that this is true.
867 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
869 * m68k-dis.c: Include <libiberty.h>.
870 (print_insn_m68k): Sort the opcode table on the most significant
871 nibble of the opcode.
874 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
876 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
877 "vsub", "vst", "xnor", and "xor" instructions.
878 (V_a1): Renamed from V_a, msb of accumulator reg number.
879 (V_a0): Add macro, lsb of accumulator reg number.
881 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
883 * tic80-dis.c (print_insn_tic80): Broke excessively long
884 function up into several smaller ones and arranged for
885 the instruction printing function to be callable recursively
886 to print vector instructions that have both a load and a
887 math instruction packed into a single opcode.
888 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
889 to explain why it comes after the other vector opcodes.
892 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
894 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
895 move insns to handle immediate operands.
897 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
899 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
900 fix operand mask in the "moveml" entries for the coldfire.
903 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
905 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
906 New macros for building vector instruction opcodes.
907 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
908 FMT_LI, which were unused. The field is now a flags field.
909 Remove some opcodes that are possible, but illegal, such
910 as long immediate instructions with doubles for immediate
911 values. Add "vadd" and "vld" instructions.
913 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
915 * tic80-opc.c (tic80_operands): Reorder some table entries to make
916 the order more logical. Move the shift alias instructions ("rotl",
917 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
918 interspersed with the regular sr.x and sl.x instructions. Add
919 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
920 "sub", "subu", "swcr", and "trap".
922 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
924 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
925 (OFF_SL_PC): Renamed from OFF_SL.
926 (OFF_SS_BR): New operand type for base relative operand.
927 (OFF_SL_BR): New operand type for base relative operand.
928 (REG_BASE): New operand type for base register operand.
929 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
930 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
931 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
933 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
934 10 char field, padded with spaces on rhs, rather than a string
935 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
936 than old TIC80_OPERAND_RELATIVE. Add support for new
937 TIC80_OPERAND_BASEREL flag bit.
939 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
941 * tic80-dis.c (print_insn_tic80): Print floating point operands
943 * tic80-opc.c (SPFI): Add single precision floating point
944 immediate operand type.
945 (ROTATE): Add rotate operand type for shifts.
946 (ENDMASK): Add for shifts.
947 (n): Macro for the 'n' bit.
948 (i): Macro for the 'i' bit.
949 (PD): Macro for the 'PD' field.
950 (P2): Macro for the 'P2' field.
951 (P1): Macro for the 'P1' field.
952 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
956 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
958 * mn10200-dis.c (disassemble): Mask off unwanted bits after
959 adding in current address for pc-relative operands.
962 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
964 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
965 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
966 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
967 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
968 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
969 REG_BASE_M_SI, REG_BASE_M_LI respectively.
970 (REG_SCALED, LSI_SCALED): New operand types.
971 (E): New macro for 'E' bit at bit 27.
972 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
973 opcodes, including the various size flavors (b,h,w,d) for
974 the direct load and store instructions.
976 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
978 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
980 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
981 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
982 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
983 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
984 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
985 masks with "MASK_* & ~M_*" to get the M bit reset.
986 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
988 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
990 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
991 correctly. Add support for printing TIC80_OPERAND_BITNUM and
992 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
994 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
995 CC, SICR, and LICR table entries.
996 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
997 "bcnd", and "brcr" opcodes.
1000 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1002 * ppc-opc.c (powerpc_operands): Make comment match the
1003 actual fields (no shift field).
1004 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1005 start-sanitize-tic80
1006 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1007 partial implementation, work in progress.
1008 * tic80-opc.c (tic80_operands): Begin construction operands table.
1009 (tic80_opcodes): Continue populating opcodes table and start
1010 filling in the operand indices.
1011 (tic80_num_opcodes): Add this.
1014 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1016 * m68k-opc.c: Add #B case for moveq.
1018 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1020 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1021 before they are used.
1023 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1025 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1026 for "breakpoint" instruction.
1028 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1030 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1031 (dep): Use ALL_CFLAGS rather than CFLAGS.
1033 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1035 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1038 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1040 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1041 start-sanitize-tic80
1042 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1045 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1047 * mips16-opc.c: Add "abs".
1049 start-sanitize-tic80
1050 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1052 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1053 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1054 (disassembler): Add bfd_arch_tic80 support to set disassemble
1055 to print_insn_tic80.
1056 * tic80-dis.c (print_insn_tic80): Add stub.
1058 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1060 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1061 * configure: Regenerate with autoconf.
1062 * tic80-dis.c: Add file.
1063 * tic80-opc.c: Add file.
1066 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1068 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1070 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1072 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1073 (mn10200_opcodes): Use it for some logicals and btst insns.
1074 Add "break" and "trap" instructions.
1076 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1078 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1080 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1082 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1083 relative load or add now depends upon whether the instruction is
1086 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1088 * mn10200-dis.c: Finish writing disassembler.
1089 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1090 Fix mask for "jmp (an)".
1092 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1093 handle endianness issues for mn10300.
1095 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1097 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1099 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1100 instruction. Fix opcode field for "movb (imm24),dn".
1102 * mn10200-opc.c (mn10200_operands): Fix insertion position
1105 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1107 * mn10200-opc.c: Create mn10200 opcode table.
1108 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1109 but moving along nicely.
1111 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1113 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1115 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1117 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1118 specifiers for fmovem* instructions.
1120 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1122 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1124 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1126 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1129 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1131 * mn10300-opc.c: Add some comments explaining the various
1134 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1136 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1138 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1141 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1142 operand specifiers in fmovm* instructions.
1144 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1146 * ppc-opc.c (insert_li): Give an error if the offset has the two
1147 least significant bits set.
1149 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1151 * mips-dis.c (print_insn_mips16): Separate the instruction from
1152 the arguments with a tab, not a space.
1154 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1156 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1159 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1162 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1164 * configure: Rebuild with autoconf 2.12.
1166 Add support for mips16 (16 bit MIPS implementation):
1167 * mips16-opc.c: New file.
1168 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1169 (mips16_reg_names): New static array.
1170 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1171 after seeing a 16 bit symbol.
1172 (print_insn_little_mips): Likewise.
1173 (print_insn_mips16): New static function.
1174 (print_mips16_insn_arg): New static function.
1175 * mips-opc.c: Add jalx instruction.
1176 * Makefile.in (mips16-opc.o): New target.
1177 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1178 * configure: Rebuild.
1180 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1182 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1183 operand specifiers in *save, *restore and movem* instructions.
1185 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1188 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1189 register operands for immediate arithmetic, not, neg, negx, and
1190 set according to condition instructions.
1192 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1193 specifier of the effective-address operand in immediate forms of
1194 arithmetic instructions. The specifier for the immediate operand
1195 notes how and where the constant will be stored.
1197 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1199 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1202 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1205 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1207 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1209 * mn10300-dis.c (disassemble): Handle register lists.
1211 * mn10300-opc.c: Fix handling of register list operand for
1212 "call", "ret", and "rets" instructions.
1214 * mn10300-dis.c (disassemble): Print PC-relative and memory
1215 addresses symbolically if possible.
1216 * mn10300-opc.c: Distinguish between absolute memory addresses,
1217 pc-relative offsets & random immediates.
1219 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1221 (disassemble): Handle SPLIT and EXTENDED operands.
1223 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1225 * mn10300-dis.c: Rough cut at printing some operands.
1227 * mn10300-dis.c: Start working on disassembler support.
1228 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1230 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1232 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1234 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1236 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1238 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1240 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1241 register argument is calls and jmp instructions.
1243 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1245 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1246 getx operand. Fix opcode for mulqu imm,dn.
1248 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1250 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1251 in MN10300_OPERAND_SPLIT operands for how many bits
1252 appear in the basic insn word. Add IMM32_HIGH24,
1253 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1254 (mn10300_opcodes): Use new operands as needed.
1256 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1257 for bset, bclr, btst instructions.
1258 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1260 * mn10300-opc.c (mn10300_operands): Remove many redundant
1261 operands. Update opcode table as appropriate.
1262 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1263 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1265 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1267 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1268 operands (for indexed load/stores). Fix bitpos for DI
1269 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1270 few instructions that insert immediates/displacements in the
1271 middle of the instruction. Add IMM8E for 8 bit immediate in
1272 the extended part of an instruction.
1273 (mn10300_operands): Use new opcodes as appropriate.
1275 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1277 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1278 sequential so the assembler never parallelizes it with
1281 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1283 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1284 a data/address register that appears in register field 0
1285 and register field 1.
1286 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1288 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1290 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1291 standard disassembly.
1293 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1294 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1295 Recategorize PALcode instructions.
1297 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1299 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1301 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1303 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1304 there are no operand types.
1306 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1308 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1310 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1312 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1314 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1316 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1318 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1319 and sst.w instructions.
1321 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1324 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1326 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1329 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1331 * ppc-opc.c (PPCPWR2): Define.
1332 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1335 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1337 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1338 field for movhu instruction.
1340 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1341 cast value to "long" not "signed long" to keep hpux10
1344 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1346 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1349 * mn10300-opc.c (FMT*): Remove definitions.
1351 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1352 for shift-by-register opcodes.
1354 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1355 into [AD][MN][01] for encoding the position of the register
1358 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1360 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1361 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1363 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1365 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1366 Fix various typos. Add "PAREN" operand.
1367 (MEM, MEM2): Define.
1368 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1369 operands. Fix several typos.
1371 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1374 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1376 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1377 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1379 (mn10300_opcodes): Break opcode format out into its own field.
1380 Update many operand fields to deal with signed vs unsigned
1381 issues. Fix one or two typos in the "mov" instruction
1382 opcode, mask and/or operand fields.
1384 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1386 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1387 m68851 wasn't reset.
1389 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1391 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1392 all opcodes. Very rough cut at operands for all opcodes.
1394 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1397 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1399 * mn10200-opc.c, mn10300-opc.c: New files.
1400 * mn10200-dis.c, mn10300-dis.c: New files.
1401 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1402 * disassemble.c: Break mn10x00 support into 10200 and 10300
1404 * configure.in: Likewise.
1405 * configure: Rebuilt.
1407 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1409 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1411 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1413 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1415 * disassemble (ARCH_mn10x00): Define.
1416 (disassembler): Handle bfd_arch_mn10x00.
1417 * configure.in: Recognize bfd_mn10x00_arch.
1418 * configure: Rebuilt.
1420 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1422 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1423 accordingly. Don't declare functions using op_rtn.
1425 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1427 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1428 params to be more standard.
1429 * (disassemble): Print absolute addresses and symbolic names for
1430 branch and jump targets.
1431 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1433 * (v850_opcodes): Add breakpoint insn.
1435 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1437 * m68k-opc.c: Move the fmovemx data register cases before the
1438 other cases, so that they get recognized before the data register
1439 does gets treated as a degenerate register list.
1441 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1443 * mips-opc.c: Add a case for "div" and "divu" with two registers
1444 and a destination of $0.
1446 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1448 * mips-dis.c (print_insn_arg): Add prototype.
1449 (_print_insn_mips): Ditto.
1451 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1453 * mips-dis.c (print_insn_arg): Print condition code registers as
1456 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1458 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1460 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1462 * v850-dis.c (disassemble): Make static. Provide prototype.
1464 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1466 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1469 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1471 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1472 ']' characters into the output stream.
1473 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1474 Add "memop" field to all opcodes (for the disassembler).
1475 Reorder opcodes so that "nop" comes before "mov" and "jr"
1476 comes before "jarl".
1478 * v850-dis.c (print_insn_v850): Fix typo in last change.
1480 * v850-dis.c (print_insn_v850): Properly handle disassembling
1481 a two byte insn at the end of a memory region when the memory
1482 region's size is only two byte aligned.
1484 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1486 * v850-dis.c (v850_reg_names): Define.
1487 (v850_sreg_names, v850_cc_names): Likewise.
1488 (disassemble): Very rough cut at printing operands (unformatted).
1490 * v850-opc.c (BOP_MASK): Fix.
1491 (v850_opcodes): Fix mask for jarl and jr.
1493 * v850-dis.c: New file. Skeleton for disassembler support.
1494 * Makefile.in Remove v850 references, they're not needed here.
1495 * configure.in: Add v850-dis.o when building v850 toolchains.
1496 * configure: Rebuilt.
1497 * disassemble.c (disassembler): Call v850 disassembler.
1499 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1500 (insert_d8_6, extract_d8_6): New functions.
1501 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1502 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1504 (IF4A, IF4B): Use "D7" instead of "D7S".
1505 (IF4C, IF4D): Use "D8_7" instead of "D8".
1506 (IF4E, IF4F): New. Use "D8_6".
1507 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1508 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1510 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1511 (v850_operands): Change D16 to D16_15, use special insert/extract
1512 routines. New new D16 that uses the generic insert/extract code.
1513 (IF7A, IF7B): Use D16_15.
1514 (IF7C, IF7D): New. Use D16.
1515 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1517 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1518 message. Issue an error if the branch offset is odd.
1520 * v850-opc.c: Add notes about needing special insert/extract
1521 for all the load/store insns, except "ld.b" and "st.b".
1523 * v850-opc.c (insert_d22, extract_d22): New functions.
1524 (v850_operands): Use insert_d22 and extract_d22 for
1526 (insert_d9): Fix range check.
1528 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1530 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1531 and set bits field to D9 and D22 operands.
1533 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1535 * v850-opc.c (v850_operands): Define SR2 operand.
1536 (v850_opcodes): "ldsr" uses R1,SR2.
1538 * v850-opc.c (v850_opcodes): Fix opcode specs for
1539 sld.w, sst.b, sst.h, sst.w, and nop.
1541 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1543 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1544 end of the opcode table.
1546 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1548 * d10v-opc.c (pre_defined_registers): Added register pairs,
1549 "r0-r1", "r2-r3", etc.
1551 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1553 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1554 Create I16U for an unsigned 16bit mmediate operand.
1555 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1557 * v850-opc.c (v850_operands): Define EP operand.
1558 (IF4A, IF4B, IF4C, IF4D): Use EP.
1560 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1561 with immediate operand, "movhi". Tweak "ldsr".
1563 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1564 correct. Get sld.[bhw] and sst.[bhw] closer.
1566 * v850-opc.c (v850_operands): "not" is a two byte insn
1568 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1570 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1572 * v850-opc.c (two): Get order of words correct.
1574 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1576 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1577 register source and destination operands.
1578 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1580 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1581 same thinko in "trap" opcode.
1583 * v850-opc.c (v850_opcodes): Add initializer for size field
1586 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1587 Add D8 for 8-bit unsigned field in short load/store insns.
1588 (IF4A, IF4D): These both need two registers.
1589 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1590 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1591 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1592 for "ldsr" and "stsr".
1593 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1596 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1597 short store word (sst.w).
1599 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1601 * v850-opc.c (v850_operands): Added insert and extract fields,
1602 pointers to functions that handle unusual operand encodings.
1604 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1606 * v850-opc.c (v850_opcodes): Enable "trap".
1608 * v850-opc.c (v850_opcodes): Fix order of displacement
1609 and register for "set1", "clr1", "not1", and "tst1".
1611 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1613 * v850-opc.c (v850_operands): Add "B3" support.
1614 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1617 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1619 * v850-opc.c: Close unterminated comment.
1621 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1623 * v850-opc.c (v850_operands): Add flags field.
1624 (v850_opcodes): add move opcodes.
1626 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1628 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1629 * configure: (bfd_v850v_arch) Add new case.
1630 * configure.in: (bfd_v850_arch) Add new case.
1631 * v850-opc.c: New file.
1633 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1635 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1637 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1639 * d10v-opc.c: Add additional information to the opcode
1640 table to help determinine which instructions can be done
1643 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1645 * mpw-make.sed: Update editing of include pathnames to be
1648 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1650 * arm-opc.h: Added "bx" instruction definition.
1652 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1654 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1656 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1658 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1660 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1662 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1664 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1666 * makefile.vms: Update for alpha-opc changes.
1668 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1670 * i386-dis.c (print_insn_i386): Actually return the correct value.
1671 (ONE, OP_ONE): #ifdef out; not used.
1673 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1675 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1676 Changed subi operand type to treat 0 as 16.
1678 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1680 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1683 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1685 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1686 memory transfer instructions. Add new format string entries %h and %s.
1687 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1690 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1692 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1693 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1695 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1697 * alpha-dis.c (print_insn_alpha_osf): Remove.
1698 (print_insn_alpha_vms): Remove.
1699 (print_insn_alpha): Make globally visible. Chose the register
1700 names based on info->flavour.
1701 * disassemble.c: Always return print_insn_alpha for the alpha.
1703 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1705 * d10v-dis.c (dis_long): Handle unknown opcodes.
1707 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1709 * d10v-opc.c: Changes to support signed and unsigned numbers.
1710 All instructions with the same name that have long and short forms
1711 now end in ".l" or ".s". Divs added.
1712 * d10v-dis.c: Changes to support signed and unsigned numbers.
1714 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1716 * d10v-dis.c: Change all functions to use info->print_address_func.
1718 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1720 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1721 move ccr/sr insns more strict so that the disassembler only
1722 selects them when the addressing mode is data register.
1724 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1725 * d10v-opc.c (pre_defined_registers): Declare.
1726 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1727 to pick a better name for the registers.
1729 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1731 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1732 operands for fexpand and fpmerge. From Christian Kuehnke
1733 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1735 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1737 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1738 print routine. Take new regnames and cpumask arguments.
1739 Kill the environment variable nonsense.
1740 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1741 (print_insn_alpha_vms): New function. Do VMS style regnames.
1742 * disassemble.c (disassembler): Test bfd flavour to pick
1743 between OSF and VMS routines. Default to OSF.
1745 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1747 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1748 * configure: Rebuild.
1749 * Makefile.in (install): Use @INSTALL_SHLIB@.
1751 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1753 * configure: (bfd_d10v_arch) Add new case.
1754 * configure.in: (bfd_d10v_arch) Add new case.
1755 * d10v-dis.c: New file.
1756 * d10v-opc.c: New file.
1757 * disassemble.c (disassembler) Add entry for d10v.
1759 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1761 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1762 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1764 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1766 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1767 distinguish between variants of the instruction set.
1768 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1769 distinguish between variants of the instruction set.
1771 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1773 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1774 the 8086 instruction set.
1775 * i386-dis.c: General cleanups. Make most things static. Add
1776 prototypes. Get rid of static variables aflags and dflags. Pass
1777 them as args (to almost everything).
1779 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1781 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1783 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1785 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1786 if the next arg is marked with SRC_IN_DST. Gross.
1788 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1789 we're looking for and find EXR.
1791 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1792 if we're looking for KBIT and we don't find it.
1794 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1797 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1798 3bit immediate operands.
1800 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1802 * Released binutils 2.7.
1804 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1805 <kkaempf@progis.ac-net.de>.
1807 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1809 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1811 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1813 * sparc-dis.c (print_insn_sparclite): New routine to print
1814 sparclite instructions.
1816 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1818 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1820 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1822 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1823 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1824 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1826 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1828 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1829 Use autoconf-set values.
1830 (docdir, oldincludedir): Removed.
1831 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1833 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1835 * alpha-opc.c: New file.
1836 * alpha-opc.h: Remove.
1837 * alpha-dis.c: Complete rewrite to use new opcode table.
1838 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1839 * configure: Rebuild with autoconf 2.10.
1840 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1841 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1843 (alpha-opc.o): New target.
1845 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1847 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1848 Set imm_added_to_rs1 even if the source and destination register
1851 * sparc-opc.c: Add some two operand forms of the wr instruction.
1853 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1855 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1858 * disassemble.c (disassembler): Handle H8/S.
1859 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1861 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1863 * sparc-opc.c: Add beq/teq as aliases for be/te.
1865 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1866 <sergei@msil.sps.mot.com>.
1868 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1870 * makefile.vms: New file.
1872 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1874 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1876 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1879 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1881 * i386-dis.c (OP_OFF): Call append_prefix.
1883 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1885 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1886 unsigned long to silence a warning from the Solaris PowerPC
1889 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1891 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1893 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1895 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1897 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1898 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1899 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1900 cpush, cpusha, cpull sparclet insns.
1902 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1904 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1906 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1908 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1909 Set F_FLOAT on other floating point instructions.
1911 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1913 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1915 (powerpc_opcodes): Add 860/821 specific SPRs.
1917 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1919 * configure.in: Permit --enable-shared to specify a list of
1920 directories. Set and substitute BFD_PICLIST.
1921 * configure: Rebuild.
1922 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1923 uses. Set to @BFD_PICLIST@.
1925 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1927 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1928 not "abs", which may be needed for the absolute in something
1929 like btst #0,@10:8. Print L_3 immediates separately from other
1930 immediates. Change ABSMOV reference to ABS8MEM.
1932 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1934 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1935 (current_arch_mask): New static global.
1936 (compute_arch_mask): New static function.
1937 (print_insn_sparc): Delete sparc_v9_p. New static local
1938 current_mach. Resort opcode table if current_mach changes.
1939 Generalize "insn not supported" test.
1940 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1941 Delete test for v9/!v9.
1942 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1944 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1945 (brfcx): Renamed to FBRX.
1946 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1947 coprocessor mnemonics are not supported on the sparclet).
1948 (condf): Renamed to CONDF.
1949 (SLCBCC2): Delete F_ALIAS flag.
1951 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1953 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1954 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1956 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1958 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1959 that the shared library version number is set correctly.
1961 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1963 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1964 Miles Bader <miles@gnu.ai.mit.edu>.
1965 * configure: Rebuild.
1967 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1969 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1972 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1974 * configure: Rebuild with autoconf 2.8.
1976 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1978 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1979 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1981 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1983 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1984 since they appear as targets in Makefile.in.
1985 * configure: Rebuild.
1987 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1989 * mpw-make.sed: Edit out shared library support bits.
1991 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1993 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1994 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1995 (sparc_opcodes): Add sparclet insns.
1996 (sparclet_cpreg_table): New static local.
1997 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1998 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2000 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2002 * i386-dis.c (index16): New static variable.
2003 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2005 (OP_indirE): Return result of OP_E.
2006 (OP_E): Check for 16 bit addressing mode, and disassemble
2007 correctly. Optimised 32 bit case a little. Don't print
2008 "(base,index,scale)" when sib specifies only an offset.
2010 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2012 * configure.in: Set and substitute SHLIB_DEP.
2013 * configure: Rebuild.
2014 * Makefile.in (SHLIB_DEP): New variable.
2015 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2016 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2017 COMMON_SHLIB, add them to piclist with appropriate modifications.
2018 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2019 here: just use piclist.
2021 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2023 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2024 (print_insn_sparc): Rewrite v9/not-v9 tests.
2025 (compare_opcodes): Likewise.
2026 * sparc-opc.c (MASK_<ARCH>): Define.
2027 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2028 (sparclet,v6notv9): Define.
2029 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2030 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2032 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2034 * configure.in: Call AC_PROG_CC before configure.host.
2035 * configure: Rebuild.
2037 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2039 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2041 * i386-dis.c (onebyte_has_modrm): New static array.
2042 (twobyte_has_modrm): New static array.
2043 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2045 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2047 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2050 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2052 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2055 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2057 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2058 m68010up, not just m68020up | cpu32.
2060 * Makefile.in (SONAME): New variable.
2061 ($(SHLINK)): Make a link to the transformed name, as well.
2062 (stamp-tshlink): New target.
2063 (install): Skip stamp-tshlink during install.
2065 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2067 * configure.in: Call AC_ARG_PROGRAM.
2068 * configure: Rebuild.
2069 * Makefile.in (program_transform_name): New variable.
2070 (install): Transform library name before installing it.
2072 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2074 * i960-dis.c (mem): Add HX dcinva instruction.
2076 Support for building as a shared library, based on patches from
2077 Alan Modra <alan@spri.levels.unisa.edu.au>:
2078 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2079 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2080 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2081 * configure: Rebuild.
2082 * Makefile.in (ALLLIBS): New variable.
2083 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2084 (COMMON_SHLIB, SHLINK): New variables.
2085 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2086 (STAGESTUFF): Remove variable.
2087 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2088 (stamp-piclist, piclist): New targets.
2089 ($(SHLIB), $(SHLINK)): New targets.
2090 ($(OFILES)): Depend upon stamp-picdir.
2091 (disassemble.o): Build twice if PICFLAG is set.
2092 (MOSTLYCLEAN): Add pic/*.o.
2093 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2094 (distclean): Remove pic and stamp-picdir.
2095 (install): Install shared libraries.
2096 (stamp-picdir): New target.
2098 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2100 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2101 Print unknown instruction as "unknown", rather than in hex.
2103 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2105 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2107 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2109 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2111 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2113 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2114 when necessary. From Ulrich Drepper
2115 <drepper@myware.rz.uni-karlsruhe.de>.
2117 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2119 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2120 sparc_num_opcodes. Update architecture enum values.
2121 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2122 (sparc_opcode_lookup_arch): New function.
2123 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2124 (sparc_opcodes): Add v9a shutdown insn.
2126 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2128 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2129 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2131 (print_insn_sparc64): Deleted.
2132 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2135 * sparc-opc.c (architecture_pname): Add v9a.
2137 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2139 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2140 incorrectly defined as 0x16 when it should be 0x15.
2141 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2142 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2143 excb (exception barrier) which is defined in the Alpha
2144 Architecture Handbook version 2.
2145 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2146 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2147 disassembled as or, for example.
2149 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2151 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2152 (_print_insn_mips): Change i from int to unsigned int.
2154 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2156 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2157 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2159 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2161 * i386-dis.c: Added Pentium Pro instructions.
2163 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2165 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2168 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2170 * sh-opc.h (sh_nibble_type): Added REG_B.
2171 (sh_arg_type): Added A_REG_B.
2172 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2174 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2176 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2178 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2180 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2182 * Makefile.in (distclean): Remove stamp-h. From Ronald
2183 F. Guilmette <rfg@monkeys.com>.
2185 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2187 From David Mosberger-Tang <davidm@azstarnet.com>:
2188 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2191 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2193 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2194 (sh_table): Added many SH3 opcodes.
2195 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2197 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2199 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2200 (subco,subco.): Mark this PPC, not PPCCOM.
2202 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2204 * configure: Rebuild with autoconf 2.7.
2206 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2208 * configure: Rebuild with autoconf 2.6.
2210 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2212 * configure.in: Sort list of architectures. Accept but do nothing
2213 for alliant, convex, pyramid, romp, and tahoe.
2215 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2217 * a29k-dis.c (print_special): Change num to unsigned int.
2219 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2221 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2224 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2226 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2227 * configure: Rebuilt.
2229 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2231 * configure.in: Add case for bfd_i860_arch.
2232 * configure: Rebuild.
2234 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2236 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2237 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2238 (NEXTDOUBLE): Likewise.
2239 (print_insn_m68k): Don't match fmoveml if there is more than one
2240 register in the list.
2241 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2243 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2245 * m68k-opc.c: Use #W rather than #w.
2246 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2248 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2250 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2251 and likewise for all the dbxx opcodes.
2253 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2255 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2257 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2259 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2260 the VR4100 specific instructions to the mips_opcodes structure.
2262 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2264 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2265 ugly Metrowerks bug in CW6, is fixed in CW7.
2267 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2269 * ppc-opc.c (whole file): Add flags for common/any support.
2271 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2273 * Makefile.in (BISON): Remove macro.
2274 (FLAGS_TO_PASS): Remove BISON.
2276 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2278 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2280 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2281 instructions that take no args by looking at the match mask.
2282 (print_insn_arg): Always print "%" before register names.
2283 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2284 [case '_']: Don't print "@#" before address.
2285 [case 'J']: Use "%s" as format string, not register name.
2286 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2288 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2290 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2293 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2295 From David Mosberger-Tang <davidm@azstarnet.com>
2297 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2298 (alpha_insn_set): added definitions for VAX floating point
2299 instructions (Unix compilers don't generate these, but handcoded
2300 assembly might still use them).
2302 * alpha-dis.c (print_insn_alpha): added support for disassembling
2303 the miscellaneous instructions in the Alpha instruction set.
2305 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2307 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2308 no longer create sysdep.h, sed ppc-opc.c to work around a
2309 serious Metrowerks C bug.
2310 * mpw-make.in: Remove.
2311 * mpw-make.sed: New file, used by mpw-configure to edit
2312 Makefile.in into an MPW makefile.
2314 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2316 * Makefile.in (maintainer-clean): New synonym for realclean.
2318 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2320 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2321 which use '0', '1', and '2' instead. Specify the proper size for
2322 a pmove immediate operand. Correct the pmovefd patterns to be
2323 moves to a register, not from a register.
2324 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2326 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2328 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2329 %psr, %wim, %tbr as F_NOTV9.
2331 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2333 * Makefile.in (Makefile): Just rebuild Makefile when running
2335 (config.h, stamp-h): New targets.
2336 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2337 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2338 rebuilding config.h.
2339 * configure: Rebuild.
2341 * mips-opc.c: Change unaligned loads and stores with "t,A"
2342 operands to use "t,A(b)".
2344 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2346 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2348 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2350 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2351 until 3 instead of until 2.
2353 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2355 * Makefile.in (ALL_CFLAGS): Define.
2356 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2357 (MOSTLYCLEAN): Add config.log.
2358 (distclean): Don't remove config.log.
2359 * configure.in: Substitute HDEFINES.
2360 * configure: Rebuild.
2362 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2364 * sh-opc.h (sh_arg_type): Add F_FR0.
2365 (sh_table, case fmac): Add F_FR0 as first argument.
2367 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2369 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2371 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2373 * sparc-dis.c: Remove all references to NO_V9.
2375 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2377 * aclocal.m4: Just include ../bfd/aclocal.m4.
2378 * configure: Rebuild.
2380 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2382 * sparc-dis.c (X_DISP19): Define.
2383 (print_insn, case 'G'): Use it.
2384 (print_insn, case 'L'): Sign extend displacement.
2386 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2388 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2389 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2390 host_makefile_frag or frags.
2391 * aclocal.m4: New file.
2392 * configure: Rebuild.
2393 * Makefile.in (INSTALL): Set to @INSTALL@.
2394 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2395 (INSTALL_DATA): Set to @INSTALL_DATA@.
2397 (AR_FLAGS): Set to rc rather than qc.
2398 (CC): Define as @CC@.
2399 (CFLAGS): Set to @CFLAGS@.
2400 (@host_makefile_frag@): Remove.
2401 (config.status): Remove dependency upon @frags@.
2403 * configure.in: ../bfd/config.bfd now just sets shell variables.
2404 Use them rather than looking through target Makefile fragments.
2405 * configure: Rebuild.
2407 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2409 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2411 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2413 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2414 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2417 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2418 (lookup_{name,value}): New functions.
2419 (prefetch_table): New static local.
2420 (sparc_{encode,decode}_prefetch): New functions.
2421 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2423 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2425 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2428 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2430 * sh-dis.c: Correct comment on first line of file.
2432 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2434 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2436 * sparc-opc.c (asi, membar): New static locals.
2437 (sparc_{encode,decode}_{asi,membar}): New functions.
2438 (sparc_opcodes, membar insn): Fix.
2439 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2440 Support decoding of membar masks.
2443 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2445 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2447 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2449 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2450 and likewise for the other branches. Add bhs as an alias for bcc,
2451 and likewise for the size variants. Add dbhs as an alias for
2454 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2456 * sh-opc.h (FP sts instructions): Update to match reality.
2458 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2460 * m68k-dis.c: (fpcr_names): Add % before all register names.
2461 (reg_names): Likewise.
2462 (print_insn_arg): Don't explicitly print % before register names.
2463 Add % before register names in static array names. In case 'r',
2464 print data registers as `@(Dn)', not `Dn@'. When printing a
2465 memory address, don't print @# before it.
2466 (print_indexed): Change base_disp and outer_disp from int to
2467 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2468 syntax. Sign extend 8 byte displacement correctly.
2469 (print_base): Print using MIT syntax. Print zpc when appropriate.
2470 Change parameter disp from int to bfd_vma.
2472 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2475 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2477 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2478 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2479 * sh-opc.h (sh_arg_type): Add new operand types.
2480 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2482 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2484 * Makefile.in (distclean): Remove generated file config.h.
2486 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2488 * Makefile.in (distclean): Remove generated file config.h.
2490 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2492 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2494 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2496 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2497 rather than numopcodes. Use m68k_opcodes rather than removed
2498 opcode function. Don't check F_ALIAS.
2499 (print_insn_arg): Change first parameter to be const char *.
2500 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2501 (m68k-opc.o): New target.
2502 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2503 * configure: Rebuild.
2505 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2507 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2508 (opcode_bits, opcode_hash_table): New variables.
2509 (opcodes_initialized): Renamed from opcodes_sorted.
2510 (build_hash_table): New function.
2511 (is_delayed_branch): Use hash table.
2512 (print_insn): Renamed from print_insn_sparc, made static.
2513 Build and use hash table. If !sparc64, ignore sparc64 insns,
2514 and vice-versa if sparc64.
2515 (print_insn_sparc, print_insn_sparc64): New functions.
2516 (compare_opcodes): Move sparc64 opcodes to end.
2517 Print commutative insns with constant second.
2518 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2520 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2522 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2523 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2524 avoids printing a delay slot in a delay slot.
2525 * sh-opc.h (sh_table): Fully bracket last entry.
2527 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2529 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2531 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2533 * configure.in: Get host_makefile_frag from ${srcdir}.
2535 * configure.in: Autoconfiscated. Check for string[s].h. Create
2536 config.h from config.in. Don't set up sysdep.h link.
2537 * sysdep.h: New file.
2538 * configure, config.in: New files, generated from configure.in.
2539 * Makefile.in: Updated to be processed autoconf-style.
2540 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2541 (Makefile): Depend on config.status.
2542 (config.status): New rule.
2543 * configure.bat: Update Makefile substitutions.
2545 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2547 * mips-opc.c (L1): Define.
2548 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2549 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2552 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2554 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2555 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2556 have multiple add units but only a single logical unit.
2558 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2559 shifted by 18, without any insertion or extraction function.
2560 (insert_cr, extract_cr): Remove.
2562 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2564 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2567 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2569 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2570 * sh-opc.h: Add copyright.
2572 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2574 * Makefile.in (crunch-m68k): Delete extra target accidentally
2575 checked in a while ago.
2577 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2579 * sh-opc.h (sh_table): Add SH3 support.
2581 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2583 * sh-opc.h: Added bsrf and braf.
2585 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2587 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2588 bogus [ls]fm{ea,fd} patterns.
2590 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2591 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2592 initialize it from memory. Make function static.
2593 (print_insn_{big,little}_arm): New functions.
2594 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2595 the correct endianness.
2597 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2599 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2602 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2604 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2605 17th, so that it builds again using GCC as the compiler.
2607 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2609 * mips-dis.c (print_insn_little_mips): Cast return value from
2610 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2611 expects an unsigned long, and that might be fewer words of
2612 argument storage (e.g., if bfd_vma is long long on a 32-bit
2614 (print_insn_big_mips): Likewise with bfd_getb32 value.
2615 (_print_insn_mips): Now static.
2617 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2619 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2620 gcc memory hog problem with initializer is fixed.
2622 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2624 Merge in support for Mac MPW as a host.
2625 (Old change descriptions retained for informational value.)
2627 * mpw-config.in (archname): Compute from the config.
2628 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2630 * mpw-config.in (target_arch): Compute from canonical target.
2631 (m68k, mips, powerpc, sparc): Add architectures.
2632 * mpw-make.in (disassemble.c.o): Add.
2633 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2635 * mpw-config.in (BFD_MACHINES): Set to a default value.
2636 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2638 * mpw-make.in (CSEARCH): Add extra-include to search path.
2640 * mpw-config.in (varargs.h): Don't create.
2641 (sysdep.h): Create using forward-include.
2642 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2644 * mpw-config.in: New file, MPW version of configure.in.
2645 * mpw-make.in: New file, MPW version of Makefile.in.
2647 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2649 * alpha-dis.c (print_insn_alpha): Put empty statement after
2652 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2654 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2655 (low_sign_extend): Likewise.
2656 (get_field): Delete unused function.
2657 (set_field, deposit_14, deposit_21): Likewise.
2659 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2661 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2664 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2666 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2668 * alpha-opc.h (OSF_ASMCODE): define
2669 print pal-code names as defined in App C of the
2670 Alpha Architecture Reference Manual
2672 * alpha-dis.c: cleaned up output
2673 print stylized code forms as defined in App A.4.3 of the
2674 Alpha Architecture Reference Manual
2676 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2678 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2680 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2683 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2685 * m68k-dis.c (opcode): New function. Returns address of opcode
2686 table entry given index, even if the opcode table was split to
2687 work around gcc bugs.
2688 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2690 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2691 (reg_names): Now const.
2692 (print_insn_arg): Arrays cacheFieldName and names now const.
2693 (print_indexed): Array scales now const.
2695 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2697 * ppc-opc.c: Sort recently added instructions by minor opcode
2698 number within major opcode number.
2700 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2702 * hppa-dis.c: Include libhppa.h.
2704 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2706 * mips-opc.c: Change dli to use M_DLI, and add dla.
2708 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2710 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2712 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2714 * mips-opc.c: Add r4650 mul instruction.
2716 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2718 * mips-opc.c: Add uld and usd macros for unaligned double load and
2721 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2723 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2724 mfdcr, mtdcr, icbt, iccci.
2726 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2728 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2729 signed char fields to shorts, more portable.
2731 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2733 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2734 char fields as signed chars, since they may have negative values.
2736 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2738 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2739 (mycroft@netbsd.org).
2741 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2743 From "Logg, Ed" <elogg@ea.com>:
2744 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2745 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2748 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2750 * ppc-opc.c: Changes based on patch from David Edelsohn
2751 <edelsohn@mhpcc.edu>.
2752 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2755 (insert_tbr): New static function.
2756 (extract_tbr): New static function.
2757 (XFXFXM_MASK, XFXM): Define.
2758 (XSPRBAT_MASK, XSPRG_MASK): Define.
2759 (powerpc_opcodes): Add instructions to access special registers by
2760 name. Add mtcr and mftbu.
2762 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2764 * mips-opc.c (P3): Define.
2765 (mips_opcodes): Add mad and madu.
2767 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2769 * configure.in: Add W65 support.
2770 * disassemble.c: Likewise.
2771 * w65-opc.h, w65-dis.c: New files.
2773 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2775 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2778 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2780 * mips-opc.c: Add dli as a synonym for li.
2782 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2784 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2785 print something for reserved opcode values, even if it won't
2788 * mips-dis.c (_print_insn_mips): When initializing, shift right
2789 and mask, to avoid sign extension problems on the Alpha.
2791 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2794 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2796 * sh-opc.h (mov.l gbr): Get direction right.
2797 * sh-dis.c (print_insn_shx): New function.
2798 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2799 print opcodes with right byte order.
2801 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2803 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2804 to avoid conflicts with getopt.
2806 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2808 * hppa-dis.c (print_insn_hppa): Read the instruction using
2809 bfd_getb32, so that it works on a little endian or 64 bit host.
2810 Remove unused local variable op.
2812 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2814 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2815 addu does not work correctly if -mips3.
2817 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2819 * a29k-dis.c (print_special): Add special register names defined
2820 on 29030, 29040 and 29050.
2821 (print_insn): Handle new operand type 'I'.
2823 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2825 * Makefile.in (INSTALL): Use top level install.sh script.
2827 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2829 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2830 that it works on a little endian host.
2832 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2834 * configure.in: Use ${config_shell} when running config.bfd.
2836 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2838 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2840 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2842 * a29k-dis.c (print_insn): Print the opcode.
2844 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2846 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2848 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2850 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2852 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2854 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2855 which store a value into memory.
2857 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2859 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2860 * arm-dis.c, arm-opc.h: New files.
2862 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2864 * Makefile.in (ns32k-dis.o): Add dependency.
2865 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2866 string, not as array of chars.
2868 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2870 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2872 * sparc-opc.c: Added sparclite extended FP operations, and
2873 versions of v9 impdep* instructions permitting specification of
2876 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2878 * i960-dis.c (reg_names): Now const.
2879 (struct sparse_tabent): New type, copied from array type in mem
2881 (ctrl): Local static array ctrl_tab now const.
2882 (cobr): Local static array cobr_tab now const.
2883 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2884 static variable mem_tab no longer explicitly initialized. Changed
2885 mem_init to const array of struct sparse_tabent.
2886 (reg): Local static variable reg_tab no longer explicitly
2887 initialized. Changed reg_init to const array of struct
2889 (ea): Local static array scale_tab now const.
2891 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2894 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2896 * configure.bat: the disassember needs to be enabled for
2897 "objdump -d" to work in djgpp.
2899 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2901 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2902 (invalid_float): Enabled general version, doesn't require running
2903 on ns32k host. Changed to take char* argument, and test for
2904 explicitly specified sizes, instead of using sizeof() on host CPU
2906 (INVALID_FLOAT): Cast first argument.
2907 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2908 list_P032, list_M032): Now const.
2909 (optlist, list_search): Made appropriate arguments now point to
2911 (print_insn_arg): Changed static array of one-character-string
2912 pointers into a static const array of characters; fixed sprintf
2913 statement accordingly.
2915 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2917 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2918 from distribution. A ns32k-dis.c from a previous distribution has
2919 been brought up to date and supports the new interface.
2921 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2923 * configure.in: add bfd_ns32k_arch target support.
2925 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2926 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2928 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2930 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2933 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2935 * h8300-dis.c, mips-dis.c: Don't use true and false.
2937 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2939 * configure.in: Change --with-targets to --enable-targets.
2941 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2943 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2944 opcodes to the first instruction with that opcode, to speed
2945 disassembly of large files. From ralphc@pyramid.com (Ralph
2948 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2950 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2952 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2954 * configure.bat: update to latest makefile.in
2956 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2958 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2959 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2960 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2961 slot insn is in a delay slot.
2962 * z8k-opc.h: (resflg): Fix patterns.
2963 * h8500-opc.h Fix CR insn patterns.
2965 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2967 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2968 "cmpl" before POWER versions, so that gas -many uses them.
2970 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2972 * disassemble.c: New file.
2973 * Makefile.in (OFILES): Add disassemble.o.
2974 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2975 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2976 binutils/configure.in.
2978 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2979 opcode being examined.
2981 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2983 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2984 (insert_ral, insert_ram, insert_ras): New functions.
2985 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2986 RAS for store with update.
2988 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2990 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2991 (edelsohn@npac.syr.edu).
2993 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2995 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2998 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3000 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3002 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3004 * ppc-opc.c (powerpc_operands): The signedp field has been
3005 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3006 instead. Add new operand SISIGNOPT.
3007 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3008 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3009 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3012 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3014 * i386-dis.c (struct private): Renamed to dis_private. `private'
3015 is a reserved word for dynix cc.
3017 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3019 * configure.in: Change error message to refer to bfd/config.bfd
3020 rather than bfd/configure.in.
3022 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3024 * ppc-opc.c: Define POWER2 as short alias flag.
3025 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3028 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3030 * i960-dis.c (print_insn_i960): Don't read a second word for
3031 opcodes 0, 1, 2 and 3.
3033 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3035 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3037 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3039 * m68881-ext.c: Removed; no longer used.
3040 * Makefile.in: Changed accordingly.
3042 * m68k-dis.c (ext_format_68881): Don't declare.
3043 (print_insn_m68k): If an instruction uses place 'i', it uses at
3044 least four fixed bytes.
3045 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3046 extended float, convert to double using floatformat_to_double, not
3047 ieee_extended_to_double, and fetch the data before converting it.
3049 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3051 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3052 davidj@ICSI.Berkeley.EDU (David Johnson).
3054 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3056 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3057 PowerPC uses bdnz[l][a].
3059 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3061 * dis-buf.c, i386-dis.c: Include sysdep.h.
3063 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3065 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3067 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3068 by Motorola PowerPC 601 with PPC_OPCODE_601.
3069 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3070 Disassemble Motorola PowerPC 601 instructions as well as normal
3071 PowerPC instructions.
3073 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3075 * i960-dis.c (reg, mem): Just use a static array instead of
3078 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3080 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3081 condition name index if this is for a negated condition.
3083 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3084 Floating point format for 'H' operand is backwards from normal
3085 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3086 operands (fmpyadd and fmpysub), handle bizarre register
3087 translation correctly for single precision format.
3089 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3090 or 'I' operands if the next format specifier is 'M' (fcmp
3091 condition completer).
3093 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3095 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3096 single number giving a bitmask for the MB and ME fields of an M
3097 form instruction. Change NB to accept 32, and turn it into 0;
3098 also turn 0 into 32 when disassembling. Seperated SH from NB.
3099 (insert_mbe, extract_mbe): New functions.
3100 (insert_nb, extract_nb): New functions.
3101 (SC_MASK): Mask out SA and LK bits.
3102 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3103 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3104 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3105 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3106 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3107 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3108 (powerpc_macros): Define table of macro definitions.
3109 (powerpc_num_macros): Define.
3111 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3112 if PPC_OPERAND_NEXT is set.
3114 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3116 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3117 char. Retrieve contents using bfd_getl32 instead of shifting.
3119 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3121 * ppc-opc.c: New file. Opcode table for PowerPC, including
3122 opcodes for POWER (RS/6000).
3123 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3124 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3125 (CFILES): Add ppc-dis.c.
3126 (ppc-dis.o, ppc-opc.o): New targets.
3127 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3129 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3131 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3132 No space before 'u', 'f', or 'N'.
3134 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3136 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3137 farther than we should.
3139 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3141 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3143 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3145 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3147 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3148 needs it, to prevent reading past the end of a section.
3150 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3152 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3153 Removed t,A case for la; always use t,A(b) case.
3155 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3157 From Ted Lemen <mellon@pepper.ncd.com>
3158 * mips-dis.c (print_insn_arg): Handle 'k'.
3159 * mips-opc.c: Make cache use k, not t.
3161 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3163 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3164 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3165 FLOAT_FORMAT_CODE to put out floating point register names.
3167 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3169 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3171 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3173 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3175 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3177 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3178 larger than 32. Moved dsxx32 variants first for disassembler.
3180 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3182 * z8kgen.c, z8k-opc.h: Add full lda information.
3184 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3186 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3187 movb instructions. Any necessary space will be emitted by
3188 the code to handle nullification completers.
3190 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3192 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3194 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3196 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3197 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3199 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3201 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3203 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3205 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3206 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3208 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3210 * m88k-dis.c (m88kdis): comment change. Remove space after
3212 (printop): handle new arg types DEC and XREG for m88110.
3214 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3216 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3217 type for absolute branch addresses. Delete special
3218 "ble" and "be" code in 'W' operand code.
3220 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3222 * mips-opc.c: Set hazard information correctly for branch
3223 likely instructions.
3225 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3227 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3228 info->fprintf_func for printing and info->print_address_func for
3231 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3233 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3235 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3237 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3238 Corrected second case of "b" for disassembler.
3240 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3242 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3243 to BFD swapping routines to correspond to BFD name changes.
3245 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3247 * mips-opc.c: Change div machine instruction to be z,s,t rather
3248 than s,t. Change div macro to be d,v,t rather than d,s,t.
3249 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3250 rem and remu which generates only the corresponding div
3251 instruction. This is for compatibility with the MIPS assembler,
3252 which only generates the simple machine instruction when an
3253 explicit destination of $0 is used.
3254 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3256 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3258 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3259 WR_31 hazard for bal, bgezal, bltzal.
3261 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3263 * hppa-dis.c (print_insn_hppa): Use print function
3264 from within the disassemble_info, not fprintf_filtered.
3266 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3268 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3269 Law, law@cs.utah.edu.)
3271 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3273 * mips-opc.c ("absu"): Removed.
3276 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3278 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3279 Changed hazard information to distinguish between memory load
3280 delays and coprocessor load delays.
3282 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3284 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3286 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3288 * configure.in: Don't pass cpu to config.bfd.
3290 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3292 * m88k-dis.c (m88kdis): Make class unsigned.
3294 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3296 * alpha-dis.c (print_insn_alpha): One branch format case was
3297 missing the instruction name.
3299 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3301 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3302 Add the arch-specific auxiliary files.
3303 (OFILES): Remove the arch-specific auxiliary files
3304 and use BFD_MACHINES instead of DIS_LIBS.
3305 * configure.in: Set BFD_MACHINES based on --with-targets option.
3307 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3309 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3312 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3314 * sparc-opc.c: Change CONST to const to deal with gcc
3315 -Dconst=__const -traditional.
3317 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3319 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3320 coprocessor instructions out of #if 0, and made them use new
3323 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3325 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3327 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3329 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3330 instruction, for use by the disassembler.
3332 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3333 hand-coded sign extensions that depended on 32-bit host ints.
3334 FIXME, we still depend on big-endian host bitfield ordering.
3335 (sparc_print_insn): Set the insn_info_valid field, and the
3336 other fields that describe the instruction being printed.
3338 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3340 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3341 `jmp' instead of just one of them.
3343 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3345 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3346 (fput_fp_reg_r): Renamed from fput_reg_r.
3347 (fput_fp_reg): New function.
3348 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3350 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3352 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3354 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3356 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3358 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3359 don't output a space.
3361 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3363 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3365 * mips-opc.c: New file, containing opcode table from
3366 ../include/opcode/mips.h.
3367 * Makefile.in: Add it.
3369 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3371 * m88k-dis.c: New file, moved in from gdb and changed to use the
3372 new dis-asm.h disassembler interface.
3373 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3374 (m88k-dis.o): New target.
3376 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3378 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3379 argument string const char * to correspond to opcode/mips.h.
3381 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3383 * mips-dis.c: Updated to account for name changes in new version
3385 * Makefile.in: Added header file dependencies.
3387 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3389 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3391 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3393 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3394 extend, rather than shifts.
3396 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3398 * Makefile.in: Undo 15 June change.
3400 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3402 * m68k-dis.c (print_insn_arg): Change return value to byte count
3404 * m68k-dis.c: Re-write to detect invalid operands before
3405 printing anything, so we can handle this the same way we
3406 handle invalid opcodes.
3408 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3410 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3412 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3414 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3417 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3419 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3421 * configure.in: Do make sysdep.h link.
3422 * Makefile.in: Search ../include. Don't search ../bfd.
3424 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3426 Changes from Jeff Law, law@cs.utah.edu:
3427 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3428 Do not print a space before the completers specified by
3431 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3433 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3434 defined, since gdb has been fixed.
3436 Changes from Jeff Law, law@cs.utah.edu:
3437 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3438 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3439 be a *disassemble_info, not a *FILE.
3440 * hppa-dis.c: Support 'd', '!', and 'a'.
3441 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3442 * hppa-dis.c: Delete cases which are no longer needed.
3444 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3446 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3448 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3450 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3453 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3455 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3456 * configure.in: No longer need to configure to get sysdep.h.
3458 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3460 * Patches from Jeffrey Law <law@cs.utah.edu>.
3461 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3462 templates for 1.1 FP computational instructions.
3464 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3466 * h8500-dis.c (print_insn_h8500): Address argument is type
3468 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3471 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3472 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3474 * sparc-dis.c (compare_opcodes): Move static declaration to
3477 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3479 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3480 instruction, remove unimp hack from 'l' argument.
3482 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3484 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3487 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3489 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3490 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3493 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3495 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3496 arrays of string pointers to 2-d arrays of chars, to save
3499 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3501 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3502 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3504 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3506 * hppa-dis.c: New file from Utah, adapted to new disassembler
3508 * Makefile.in: Include it.
3510 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3512 * sh-dis.c, sh-opc.h: New files.
3514 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3516 * alpha-dis.c, alpha-opc.h: New files.
3518 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3520 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3523 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3525 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3527 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3529 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3532 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3534 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3535 and double percent signs a few places.
3537 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3539 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3540 Use info->print_address_func not print_address.
3542 * dis-buf.c (generic_print_address): New function.
3544 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3546 * Makefile.in: Add sparc-dis.c.
3547 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3549 Add `add' instruction to the set that get checked
3550 for a preceding `sethi' in order to print an absolute address.
3551 * (print_insn): Disassembly prefers real instructions.
3552 (is_delayed_branch): Speed up.
3553 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3554 Still missing some float ops, and needs testing.
3555 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3556 F_ALIAS. Use printf, not fprintf, when not passing a file
3558 (compare_opcodes): Check that identical instructions have
3559 identical opcodes, complain otherwise.
3562 * Include reg_names.
3564 Use dis-asm.h/read_memory_func interface.
3566 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3568 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3569 deliberately return non-zero to setjmp from longjmp. Otherwise
3570 this code fails to compile.
3572 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3574 * m68k-dis.c: Fix prototype for fetch_arg().
3576 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3578 * dis-buf.c: New file, for new read_memory_func interface.
3579 Makefile.in (OFILES): Include it.
3580 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3581 Use new read_memory_func interface.
3583 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3585 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3586 * h8500-opc.h: Fix couple of opcodes.
3588 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3590 * Makefile.in: add dvi & installcheck targets
3592 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3594 * Makefile.in: Update for h8500-dis.c.
3596 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3598 * h8500-dis.c, h8500-opc.h: New files
3600 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3602 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3603 ../include/dis-asm.h.
3604 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3605 and ../gdb/m68k-pinsn.c).
3606 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3607 and ../gdb/i386-pinsn.c).
3608 * m68881-ext.c: New file. Moved definition of
3609 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3610 * Makefile.in: Adjust for new files.
3611 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3612 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3613 can be dis-assembled.
3615 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3617 * mips-dis.c (print_insn_arg): Now returns void.
3619 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3621 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3622 files that use the macros.
3624 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3626 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3627 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3628 (CFILES): Added mips-dis.c.
3630 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3632 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3633 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3635 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3637 * Makefile.in: Improve *clean rules.
3638 * configure.in: Allow a default host.
3640 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3642 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3643 files include other sysdep files
3645 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3647 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3649 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3651 * configure.in: For host support, use ../bfd/configure.host
3652 so it stays in sync with the ../bfd/hosts database.
3654 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3656 * configure.in: use cpu-vendor-os triple instead of nested cases
3658 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3660 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3661 *always* the wrong one.
3663 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3665 * z8kgen.c: added copyright info
3667 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3669 * z8k-dis.c (unparse_instr): prettier tabs
3670 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3672 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3674 * configure.in: Add ncr* configuration.
3675 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3676 picayune ANSI compilers happy.
3678 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3680 * configure.in (i386): Make i386 and i486 synonymous for now.
3681 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3683 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3685 * Makefile.in (install): Fix typo.
3687 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3689 * Makefile.in (make): Remove obsolete crud.
3690 (sparc-opc.o): Avoid Sun Make VPATH bug.
3692 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3694 * Makefile.in: since there are no SUBDIRS, remove rule and
3695 references of subdir_do.
3697 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3699 * Makefile.in (install): Get the library name right here too.
3700 Don't install bfd.h, since it's unrelated to this library. No
3701 subdirs to recurse into, either.
3702 (CFILES): The source file has a .c suffix, not .o.
3704 * sparc-opc.c: New file, moved from BFD.
3705 * Makefile.in (OFILES): Build it.
3707 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3709 * z8k-dis.c: fixed forward refferences of some declarations.
3711 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3713 * Makefile.in: get the name of the library right
3715 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3717 * z8k-dis.c: knows how to disassemble z8k stuff
3718 * z8k-opc.h: new file full of z8000 opcodes
3722 version-control: never
projects / platform / upstream / binutils.git / blob