1 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
3 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
5 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
7 * sparc-dis.c (print_insn_sparc): big endian instruction / little
10 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
12 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
13 and SHORT_B3b formats to use Rb instead of Ra.
15 Add FLAG_MUL16 to MUL2XH opcode.
17 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
18 to existing 1.1.1 parallelisation prohibition procedure.
20 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
22 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
23 * cgen-dis.in (extract_normal): Likewise.
24 * m32r-asm.c,m32r-dis.c: Regenerate.
27 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
29 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
33 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
35 * mips-opc.c (multu1): Add two operand variant for the r5900.
38 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
40 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
41 with a shift count of 0.
44 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
46 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
48 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
50 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
51 (_print_insn_mips): Likewise.
52 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
56 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
58 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
59 (cgen_hw_lookup_by_num): New function.
62 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
65 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
67 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
69 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
71 * sparc-dis.c (print_insn_sparc): Always fetch instructions
72 as big-endian on SPARClite.
75 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
77 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
79 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
83 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
85 * d30v-opc.c (pre_defined_register): Remove alias for r0.
88 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
90 * mips-opc.c (break): Added 20-bit single-operand break
91 instruction for R5900 only.
94 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
96 * po/Make-in (install-info): New target.
98 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
100 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
101 * configure: Rebuild.
103 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
105 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
106 variety of ISA2 instructions to set bottom ten bits of trap code.
108 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
110 * Makefile.am (config.status): Add explicit target so that
111 config.status depends upon bfd/configure.in.
112 * Makefile.in: Rebuild.
114 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
116 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
117 instructions to set bottom ten bits of break code.
118 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
119 for above optional argument.
121 start-sanitize-cygnus
122 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
124 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
125 * m32r-opc.h: Regenerate.
128 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
130 * makefile.vms: Run dec c with /nodebug.
132 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
134 * Makefile.in: Rebuilt.
135 * Makefile.am: Regenerated dependencies with mkdep.
137 * opintl.h (_): Define as dgettext.
139 start-sanitize-cygnus
140 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
142 * configure.in: Add support for --enable-cgen-maint.
143 * Makefile.am (M32R_DEPS): New variable.
144 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
145 * aclocal.m4: Regenerate.
146 * Makefile.in: Regenerate.
147 * configure: Regenerate.
149 * Makefile.am (CGENFILES): Add minsn.scm.
152 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
154 * cgen-asm.c: Internationalised.
155 start-sanitize-cygnus
156 * cgen-asm.in: Internationalised.
157 * cgen-opc.in: Internationalised.
159 * m32r-asm.c: Internationalised.
160 * m32r-dis.c: Internationalised.
161 * m32r-opc.c: Internationalised.
163 * aclocal.m4: Regenerated.
164 * configure: Regenerated.
165 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
166 * Makefile.in: Rebuild.
167 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
168 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
170 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
172 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
174 * aclocal.m4, configure: Rebuild with current tools.
176 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
178 * opintl.h: New file - contains internationalisation macros used
179 by source files in this directory.
180 * po/: New subdirectory - contains internationalisation files.
181 * po/Make-in: New file - Makefile constructor.
182 * po/POTFILES.in: New file - list of files in opcodes directory
183 that should be scan for internationalisation macros.
184 * po/opcodes.pot: New file - list of internationisation strings
185 found in files mentioned in po/POTFILES.in.
186 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
187 entry. Add intl directory to include paths.
188 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
189 HAVE_STRCPY, HAVE_LC_MESSAGES
190 * configure.in: Add rule to build Makefile in po subdirectory.
191 * Makefile.in: Rebuilt.
192 * aclocal.m4: Rebuilt.
193 * config.in: Rebuilt.
194 * configure: Rebuilt.
195 * alpha-opc.c: Internationalised.
196 * arc-dis.c: Internationalised.
197 * arc-opc.c: Internationalised.
198 * arm-dis.c: Internationalised.
199 * cgen-asm.c: Internationalised.
201 * d30v-dis.c: Internationalised.
203 * dis-buf.c: Internationalised.
205 * dvp-dis.c: Internationalised.
206 * dvp-opc.c: Internationalised.
208 * h8300-dis.c: Internationalised.
209 * h8500-dis.c: Internationalised.
210 * i386-dis.c: Internationalised.
211 * m10200-dis.c: Internationalised.
212 * m10300-dis.c: Internationalised.
213 * m68k-dis.c: Internationalised.
214 * m88k-dis.c: Internationalised.
215 * mips-dis.c: Internationalised.
216 * ns32k-dis.c: Internationalised.
217 * opintl.h: Internationalised.
218 * ppc-opc.c: Internationalised.
219 * sparc-dis.c: Internationalised.
220 * v850-dis.c: Internationalised.
221 * v850-opc.c: Internationalised.
223 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
225 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
226 (asm_hash_table_entries): New variable.
227 (cgen_asm_init): Free asm_hash_table_entries.
228 (hash_insn_array,hash_insn_list): New functions.
229 (build_asm_hash_table): Use them. Hash macro insns as well.
230 (cgen_asm_lookup_insn): Update.
231 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
232 (dis_hash_table_entries): New variable.
233 (cgen_dis_init): Free dis_hash_table_entries.
234 (hash_insn_array,hash_insn_list): New functions.
235 (build_dis_hash_table): Use them. Hash macro insns as well.
236 (cgen_dis_lookup_insn): Update.
237 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
238 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
239 (cgen_macro_insn_count): New function.
240 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
241 All callers updated. Sanity check result of extract fn.
242 (@arch@_cgen_get_insn_operands): Change result type to void.
243 Delete args insn_value, length. New arg fields. All callers updated.
244 (@arch@_cgen_lookup_get_insn_operands): New function.
245 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
247 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
249 * i386-dis.c (OP_DSSI): Print segment override.
252 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
254 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
258 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
260 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
264 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
266 * vu0.h (vlqd, vlqi): Update per revised specs.
270 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
272 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
273 (vif_operands): Update.
274 (vif_get_unpackloc): Delete.
275 (state_vif_unpackloc{,_star_p}): Delete.
276 (dvp_opcode_init_parse): Update.
277 (vif_unpack_len_value): Avoid divide by zero.
281 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
283 * vu0.h: Specs changed for VCALLMSR bit pattern.
284 * mips-dis.c: (print_insn_arg) Matching change.
287 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
289 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
292 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
294 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
295 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
296 * configure.in: Define and substitute WIN32LDFLAGS and
298 * aclocal.m4: Rebuild with new libtool.
299 * configure, Makefile.in: Rebuild.
302 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
304 * vu0.h: Corrected bit pattern for VMAXI opcode.
307 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
309 * m32r-opc.c: Regenerate.
312 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
314 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
315 (dvp_expand_macro): Implement.
316 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
317 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
320 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
322 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
323 before trying to copy it.
324 * Makefile.in: Rebuild.
326 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
328 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
331 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
333 * m32r-opc.c: Fix bit patterns for SAT and SATB.
336 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
338 * ns32k-dis.c (bit_extract_simple): New function to extract bits
339 from an arbitrary valid buffer instead of fetching them on demand
341 (invalid_float): use bit_extract_simple() instead of bit_extract().
344 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
346 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
347 * m32r-opc.h: Add extra control registers.
350 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
352 From H.J. Lu <hjl@gnu.org>:
353 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
356 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
358 * Branched binutils 2.9.
361 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
363 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
364 disassembling last 4 bytes of a section.
367 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
369 Fix some gcc -Wall warnings:
370 * arc-dis.c (print_insn): Add casts to avoid warnings.
371 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
372 * d10v-dis.c (dis_long, dis_2_short): Likewise.
374 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
375 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
376 (parse_bc, parse_vfreg, parse_accdest): Likewise.
377 (parse_ffstreg, parse_vif_mode): Likewise.
379 * m10200-dis.c (disassemble): Likewise.
380 * m10300-dis.c (disassemble): Likewise.
381 * ns32k-dis.c (print_insn_ns32k): Likewise.
382 * ppc-opc.c (insert_ral, insert_ram): Likewise.
383 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
384 * cgen-opc.c (cgen_keyword_search_next): Likewise.
385 * d10v-dis.c (dis_long, dis_2_short): Likewise.
387 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
390 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
391 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
392 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
394 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
396 * tic80-dis.c (print_one_instruction): Likewise.
398 * w65-dis.c (print_operand): Likewise.
399 * z8k-dis.c (fetch_data): Likewise.
400 * a29k-dis.c: Add return type for find_byte_func_type.
401 * arc-opc.c: Include <stdio.h>. Remove declarations of
402 insert_multshift and extract_multshift.
404 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
406 (extract_value): Fully parenthesize expression.
409 * dvp-opc.c: Include <ctype.h>.
410 (print_sdest): Add default case to switch.
412 * h8500-dis.c (print_insn_h8500): Initialize local variables.
413 * h8500-opc.h (h8500_table): Fully bracket initializer.
414 * w65-opc.h (optable): Likewise.
415 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
416 * i386-dis.c (OP_E): Initialize local variables.
417 * m10200-dis.c (print_insn_mn10200): Likewise.
418 * mips-dis.c (print_insn_mips16): Likewise.
419 * sh-dis.c (print_insn_shx): Likewise.
420 * v850-dis.c (print_insn_v850): Likewise.
421 * ns32k-dis.c (print_insn_arg): Declare.
422 (get_displacement, invalid_float): Declare.
423 (list_search, sign_extend, flip_bytes): Declare return type.
424 (get_displacement): Likewise.
425 (print_insn_arg): Likewise. Make d int. Fix sprintf format
427 (print_insn_ns32k): Make i unsigned.
428 (invalid_float): Make static. Declare type of val.
429 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
430 on each for iteration.
431 * tic30-dis.c (get_indirect_operand): Likewise.
432 * z8k-dis.c (print_insn_z8001): Declare return type.
433 (print_insn_z8002): Likewise.
434 (unparse_instr): Fix sprintf format strings.
436 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
438 * mips-opc.c: Add "sync.l" and "sync.p".
441 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
443 * dvp-opc.c (extract_vif_datalen): Rewrite.
444 (vif_insn_len): Perform 0->max+1 conversion for direct length.
446 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
448 * dvp-dis.c (print_insn): Print unpack address in hex.
449 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
450 Don't skip over '*', just record it.
451 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
452 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
453 Don't skip over '*', just record it.
454 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
455 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
456 (vif_opcodes): Likewise.
457 (state_vif_{mpg,unpack}loc_star_p): New static locals.
458 (vif_macros,vif_macro_count): New globals.
459 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
460 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
461 (vif_get_wl_cl): New function.
462 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
465 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
467 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
468 default m68k variant to recognize.
470 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
471 (ctrl, cobr, mem, ea): Likewise.
472 (print_addr): Likewise. Remove cast.
473 (ea): Cast argument of print_addr to bfd_vma.
475 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
477 (cgen_parse_unsigned_integer): Likewise.
478 (cgen_parse_address): Likewise.
480 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
482 * i960-dis.c (ctrl): Add full braces to structure initialization.
483 (cobr, mem, reg): Likewise.
484 (ea): Correct parenthesization in expression.
486 * cgen-asm.c: Include <ctype.h>.
487 (build_asm_hash_table): Remove unused local variable i.
488 (cgen_parse_keyword): Add casts to avoid warnings.
490 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
491 symbol. Fix indentation.
492 (print_insn_little_arm): Likewise.
495 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
497 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
502 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
504 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
509 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
511 * dvp-opc.c (vif_operand_datalen_special): New global.
515 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
517 * vu0.h (vcallms): Use 'O' for call target operand.
518 * mips-dis.c (print_insn_arg): Handle 'O'.
521 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
523 * configure.in: Use AM_DISABLE_SHARED.
524 * aclocal.m4, configure: Rebuild with libtool 1.2.
527 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
529 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
534 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
536 These patches are courtesy of Jonathan Walton and Tony Thompson
537 (athompso@cambridge.arm.com).
539 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
542 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
543 both the offset and the label closest to the destination.
546 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
548 * vu0.h: New file with cop2/vu0 instructions.
549 * mips-opc.c: Include vu0.h.
550 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
552 (print_insn_mips): Do not emit a tab after an instruction if the
553 first arg is an instruction completer (&). If the next arg is an
554 escape character (%), then print the next arg verbatim.
555 * Makefile.am (mips-opc.lo): Depend on vu0.h
559 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
561 * dvp-opc.c (vif_opcodes): Add stcycl.
563 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
565 * dvp-dis.c (print_dma): Change length from 16 to 8.
568 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
570 * m32r-opc.h: Regenerate.
573 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
575 * dvp-opc.c (print_dest1): Print dest spec again.
576 (print_vfreg,print_accdest): Likewise.
577 (vif_unpack_len): Round result up to word boundary.
580 start-sanitize-vr4320
581 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
583 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
585 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
587 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
592 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
594 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
595 (print_insn): Do mask comparison on proper opcode word.
596 Print unsigned values in hex.
597 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
598 (parse_bc): Catch missing dest.
599 (parse_vfreg): Replace atoi call with strtol.
600 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
601 (parse_bcftreg,parse_ffstreg): Handle missing dest.
602 (extract_gif_eop): New function.
603 (gif_operands): Update eop entry.
604 (VGIFOP,VGIFNREGS): Fix calcs.
605 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
606 (gif_regs): Add entry for unused 11 case.
607 (print_gif_regs): Print empty list instead of nothing.
608 (extract_gif_nloop): Fix value calc.
609 (print_gif_nloop): Always print value, even if 0.
610 (insert_vif_wlcl,extract_vif_wlcl): New functions.
611 (vif_operands): Use them for wl,cl fields.
612 (state_vif_wl,state_vif_cl): New static locals.
613 (parse_vif_mode): Handle numeric args.
614 (vif_unpack_len_value,vif_unpack_len): New functions.
615 (vif_insn_len): Call vif_unpack_len.
618 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
620 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
622 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
624 * cgen-asm.in: Move insertion of generated routines to top of file.
625 (insert_normal): Add prototype. Delete `shift' arg.
626 * cgen-dis.in: Move insertion of generated routines to top of file.
627 (extract_normal): Add prototype. Delete `shift' arg.
628 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
629 (print_keyword): Add prototype. Fix type of `attrs' arg.
631 start-sanitize-vr4320
632 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
634 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
635 * mips-opc.c ("mac","dmac") : Added 4320 insns.
638 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
640 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
641 assume that info->symbols is non-empty.
643 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
645 * alpha-opc.c (cvtqs) There is no such thing.
646 (cvttq): Missing most of the /*d variants.
649 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
651 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
653 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
654 (r5900/msub.s): Takes three operands, not four. Fix opcode.
658 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
660 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
661 delayed branches or jumps.
665 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
667 * dvp-opc.c (vif_operands): Add unpack[u] support.
668 (vif_opcodes): Ditto.
669 (*_vif_imrubits): Renamed from *_vif_imrbits.
671 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
673 * dvp-dis.c (print_insn): Handle word number.
674 Handle mips address vs vu address.
675 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
676 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
677 ({insert,extract}_dma_addr): Fix word ofset.
678 ({insert,print}_gif_regs): Fix encode/decode.
681 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
683 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
685 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
686 * tic30-dis.c (print_branch): Likewise.
688 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
689 * dvp-dis.c (dvp_info_mach_type): New function.
690 (print_insn_dvp): Call it.
691 (print_vif): Return length of 4 if mpg or direct insn so following
692 insns get properly disabled.
693 (print_gif): Fix word order.
694 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
695 (gif_operands): Fix word order.
696 (gif_opcodes): Likewise.
697 ({insert,extract,print}_gif_regs): Likewise.
698 (gif_regs): Add new register number/name changes.
699 (dma_opcodes): Add dmarefe insn.
702 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
704 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
705 saved_symbol code as it is no longer needed.
707 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
709 * cgen-asm.c: Include symcat.h.
710 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
712 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
715 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
717 * dvp-opc.c (extra_dma_flags): Fix typos.
718 (dma_operands): Fix word numbers.
719 (dma_opcodes): Likewise.
720 ({insert,extract}_dma_flags): Likewise.
723 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
725 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
728 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
730 * dvp-dis.c (print_gif): Complete.
731 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
732 (state_gif_{nregs,regs,nloop}): New static locals.
734 (dvp_opcode_init_{parse,print}): Init gif state locals.
735 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
736 (vif_insn_len): Handle `unpack'.
737 ({insert,extract}_dma_flags): Complete.
741 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
743 * mips-opc.c (mula.s): Renamed from multa.s.
746 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
748 * m32r-opc.[ch]: Regenerate.
751 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
753 * dvp-opc.c (dma_operands): Rewrite.
754 (dma_operand_{count,addr}): New globals.
755 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
756 (insert_dma_addr): Insert value into insn.
757 (extract_dma_addr): Extract value from insn.
759 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
761 * dvp-dis.c (print_vu): Handle loi insns.
762 (print_insn): Likewise.
763 * dvp-opc.c (vu_lower_opcodes): Add "loi".
764 (vu_operands): Make LDEST1 a FAKE operand.
765 (parse_dest1): Allow elided argument.
766 (print_dest1): Don't print the argument.
768 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
770 * dvp-opc.c (parse_vfreg): Dest spec is optional.
771 (print_vfreg): Don't print dest spec.
772 (parse_accdest): Dest spec is optional.
773 (print_accdest): Don't print dest spec.
776 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
778 * Makefile.am (CGENFILES): Update.
779 * Makefile.in: Regenerate.
780 * cgen-asm.in (insert_normal): Result is error message now.
781 Validate value to be inserted.
782 (insert_insn_normal): Result is error message now.
783 (@arch@_cgen_assemble_insn): Update.
784 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
785 arguments. Don't perform validation here.
786 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
788 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
790 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
791 operand instance list.
792 * m32r-opc.c: Regenerate.
794 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
796 * Makefile.am (AUTOMAKE_OPTIONS): Define.
797 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
799 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
801 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
803 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
805 * configure.in: Get the version number from BFD.
806 * configure: Rebuild.
808 From H.J. Lu <hjl@gnu.org>:
809 * Makefile.am (libopcodes_la_LDFLAGS): Define.
810 * Makefile.in: Rebuild.
812 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
814 * m32r-opc.c: Regenerate.
815 * m32r-opc.h: Regenerate.
817 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
819 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
820 Ignore ALIAS insns if asked to.
821 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
822 * m32r-opc.c: Regenerate.
825 * dvp.opc.c: Nicely format opcode tables.
826 (vu_operands): New element UFLAGS.
827 (parse_uflags,print_uflags): New functions.
828 (vu_upper_opcodes): Add UFLAGS to all insns.
831 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
833 Fix rac to accept only a0:
834 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
835 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
836 Introduce OPERAND_GPR.
837 * d10v-dis.c (print_operand): Likewise.
839 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
841 * cgen-opc.in: New file.
842 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
843 * Makefile.am (CGENFILES): Add cgen-opc.in.
844 * Makefile.in: Regenerate.
846 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
847 (cgen_hw_lookup): Make result const.
849 * cgen-dis.in (*): Use PTR instead of void *.
850 (print_insn): Delete unused vars `i', `syntax'.
852 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
855 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
857 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
858 (vif_opcodes): Update renamed insns.
859 * dvp-dis.c (*): Likewise.
862 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
864 * configure, aclocal.m4: Rebuild with new libtool.
867 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
869 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
870 instructions use a PC relative branch, not absolute.
873 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
875 * configure.in: Set libtool_enable_shared rather than
876 libtool_shared. Remove diversion hack.
877 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
879 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
881 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
882 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
884 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
886 * tic30-dis.c: New file.
887 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
888 * configure.in: Handle bfd_tic30_arch.
889 * Makefile.am: Rebuild dependencies.
890 (CFILES): Add tic30-dis.c
891 (ALL_MACHINES): Add tic30-dis.lo.
892 * configure, Makefile.in: Rebuild.
895 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
897 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
898 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
899 macwhi-a and macwlo-a instructions.
903 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
905 * dvp-opc.c, fixed encoding of a bunch of instructions to
906 be consistent with the asmvu assembler (and inconsistent
907 with the specification).
909 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
911 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
912 in the opcode table. The pkemscalf instruction must come first.
914 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
916 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
919 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
921 * m32r-opc.h (HAVE_CPU_M32R): Define.
924 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
926 * dvp-dis.c, dvp-opc.c: New files.
927 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
928 * configure: Regenerate.
929 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
930 (dvp-dis.lo,dvp-opc.lo): Add rules for.
931 (mips-dis.lo): Compile with @archdefs@.
932 * Makefile.in: Regenerate.
933 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
934 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
937 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
939 * v850-opc.c (insertion routines): If both alignment and size is
940 wrong then report this.
942 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
944 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
945 Only recognize instructions for the current target_processor.
947 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
949 * d10v-dis.c (PC_MASK): Correct value.
950 (print_operand): If there's a reloc, don't calculate the
951 address because they could be in different sections.
953 start-sanitize-cygnus
954 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
956 * cgen.sh: Rewrite to be like simulator's version.
957 * Makefile.am (cgen): Update call to cgen.sh.
958 * Makefile.in: Regenerate
961 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
963 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
964 instruction after the 4650's "mul" instruction; nobody's using the
965 4010 these days. If object files someday indicate which processor
966 variant they're intended for, we can do a better job at this.
969 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
971 * mips-opc.c (c.lt.s): Add r5900 variant.
975 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
977 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
978 table provided entry size. Use CGEN_INSN_MNEMONIC.
979 (cgen_parse_keyword): Rewrite.
980 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
981 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
982 * cgen-opc.c: Clean up pass over `struct foo' usage.
983 (cgen_keyword_lookup_value): Handle "" entry.
984 (cgen_keyword_add): Likewise.
985 start-sanitize-cygnus
986 * Makefile.am: Add cgen support.
987 * Makefile.in: Regenerate.
988 * configure.in: Add cgen support.
989 * configure: Regenerate.
990 * aclocal.m4: Regenerate.
991 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
994 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
996 * mips-opc.c: Add FP_D to s.d instruction flags.
998 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1000 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1002 start-sanitize-tic80
1003 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1005 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1006 PC relative offset forms before the 15 bit forms. An assembler command
1007 line option now chooses the default.
1010 start-sanitize-r5900
1011 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1013 * mips-opc.c: Add many missing r5900 instructions.
1017 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1019 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1020 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1023 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1025 * configure: Only build libopcodes shared if --enable-shared's value
1026 was `yes', or was set to `*opcodes*'.
1027 * aclocal.m4: Likewise.
1028 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1029 original source of this bit of code. It's not clear what the best fix
1032 start-sanitize-r5900
1033 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1035 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1037 start-sanitize-tic80
1038 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1040 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1041 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1042 offset forms before the 15 bit forms, to default to the long forms.
1045 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1047 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1049 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1051 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1052 symbol if none is present.
1053 (print_insn_big_arm): Prevent examination of stored symbol if
1056 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1058 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1060 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1062 * disassemble.c: Remove disasm_symaddr() function.
1064 * arm-dis.c: Use info->symbol instead of info->flags to determine
1065 if disassmbly should be in Thumb or Arm mode.
1067 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1069 * arm-dis.c: Add support for disassembling Thumb opcodes.
1070 (print_insn_thumb): New function.
1072 * disassemble.c (disasm_symaddr): New function.
1074 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1075 (thumb_opcodes): Table of Thumb opcodes.
1077 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1079 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1081 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1082 and 'v' as operand types.
1084 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1086 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1087 <olivier.carmona@di.epfl.ch>.
1088 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1089 which has a two word opcode with a one word argument.
1092 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1094 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1095 unsigned, not signed.
1096 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1099 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1101 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1102 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1103 (ftrv): Slay the cut-and-paste monster.
1105 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1107 * d10v-dis.c (print_operand):
1108 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1110 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1112 * d10v-opc.c (OPERAND_FLAG): Split into:
1113 (OPERAND_FFLAG, OPERAND_CFLAG) .
1117 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1119 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1120 field for all INSN_MACRO's.
1121 * mips16-opc.c: same
1123 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1125 * mips-opc.c (sync,cache): These are 3900 insns.
1127 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1129 sh-opc.h (sh_table): Remove ftst/nan.
1131 start-sanitize-vr5400
1132 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1134 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1135 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1137 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1141 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1143 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1144 Add tx49 insns and configury.
1147 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1149 * mips-opc.c (ffc, ffs): Fix mask.
1152 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1154 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1158 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1160 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1161 start-sanitize-vr5400
1162 Added VR5400 instructions.
1163 (N5): New cpu-id macro.
1165 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1167 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1169 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1170 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1172 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1174 * v850-dis.c (disassemble): Replace // with /* ... */
1176 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1178 * sparc-opc.c: Add wr & rd for v9a asr's.
1179 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1180 (v9a_asr_reg_names): New variable.
1181 Patch from David Miller <davem@vger.rutgers.edu>.
1183 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1185 * sparc-opc.c (v9notv9a): New insn type.
1186 (IMPDEP): Move to the end to not conflict with edge8 et al.
1187 Patch from David Miller <davem@vger.rutgers.edu>.
1189 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1191 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1193 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1195 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1197 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1199 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1200 of disassemble_info structure to determine if an overlay address
1201 has a matching symbol in low memory.
1203 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1204 new symbol_at_address_func field in disassemble_info structure.
1206 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1208 * v850-opc.c (extract_d22): Use signed arithmatic.
1210 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1212 * mips-opc.c: Three op mult is not an ISA insn.
1214 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1216 * mips-opc.c: Fix formatting.
1218 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1220 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1221 than assuming that char is signed. Explicitly sign extend 16 bit
1222 values, rather than assuming that short is 16 bits.
1223 (OP_sI, OP_J, OP_DIR): Likewise.
1225 start-sanitize-v850e
1226 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1228 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1232 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1234 * v850-opc.c: Fix typo in comment.
1236 * v850-dis.c (disassemble): Add test of processor type when
1237 determining opcodes.
1239 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1241 * configure.in: Use a diversion to set enable_shared before the
1242 arguments are parsed.
1243 * configure: Rebuild.
1245 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1247 * m68k-opc.c (TBL1): Use ! rather than `.
1248 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1250 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1252 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1254 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1256 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1259 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1260 * aclocal.m4: Rebuild with new libtool.
1261 * configure: Rebuild.
1263 start-sanitize-v850e
1264 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1266 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1269 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1271 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1273 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1275 * v850-opc.c (v850_opcodes): Further rearrangements.
1278 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1280 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1283 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1285 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1288 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1290 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1292 * mips16-opc.c: Added mips16 sdbbp.
1295 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1297 * v850-opc.c: Initialise processors field of v850_opcode structure.
1300 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1302 Merge changes from Martin Hunt:
1304 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1306 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1307 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1308 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1310 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1312 * d30v-dis.c (print_insn): First operand of d*i (delayed
1313 branch) instructions is relative.
1315 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1316 (d30v_operand_table): Add IMM6S3 type.
1317 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1319 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1320 and cmp instructions.
1322 * d30v-opc.c: Correct entries for repeat*, and sat*.
1323 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1324 types. Correct several formats.
1326 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1328 * d30v-opc.c (pre_defined_registers): Change control registers.
1330 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1331 SHORT_C2. Manual was incorrect.
1333 * d30v-dis.c (lookup_opcode): Return value now indicates
1334 if an opcode has a short and a long form. Used for deciding
1335 to append a ".s" or ".l".
1336 (print_insn): Append a ".s" to an instruction if it is
1337 the short form and ".l" if it is a long form. Do not append
1338 anything if the instruction has only one possible size.
1340 * d30v-opc.c: Change mulx2h to require an even register.
1341 New form: SHORT_A2; a SHORT_A form that needs an even
1342 register as the first operand.
1344 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1345 instruction was not being disassembled if there were an odd
1346 number of instructions.
1348 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1351 start-sanitize-v850e
1352 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1354 * v850-dis.c (disassemble): Improved display of register lists.
1357 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1359 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1360 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1361 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1362 fandnot1s, fandnot2s.
1364 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1366 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1368 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1370 * cgen-asm.c (cgen_parse_address): New argument resultp.
1371 All callers updated.
1372 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1374 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1376 * mn10200-dis.c (disassemble): PC relative instructions are
1377 relative to the next instruction, not the current instruction.
1379 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1381 * v850-dis.c (disassemble): Only signed extend values that are not
1382 returned by extract functions.
1383 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1385 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1387 * v850-opc.c: Update comments. Remove use of
1388 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1390 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1392 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1394 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1396 * configure: Rebuilt with latest devo autoconf for NT support.
1398 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1400 * v850-dis.c (disassemble): Use curly brace syntax for register
1403 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1404 where r0 is being used as a destination register.
1406 start-sanitize-v850e
1407 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1409 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1412 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1414 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1415 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1416 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1417 Add insns to access SGR and DBR.
1418 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1420 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1422 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1424 start-sanitize-v850e
1425 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1427 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1428 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1431 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1433 * configure (cgen_files): Add support for v850e target.
1434 * configure.in (cgen_files): Add support for v850e target.
1436 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1438 * configure (cgen_files): Add support for v850ea target.
1439 * configure.in (cgen_files): Add support for v850ea target.
1442 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1444 * configure.in (bfd_arc_arch): Add.
1445 * configure: Rebuild.
1446 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1447 * Makefile.in: Rebuild.
1448 * arc-dis.c, arc-opc.c: New files.
1449 * disassemble.c (ARCH_all): Define ARCH_arc.
1450 (disassembler): Add ARC support.
1452 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1454 start-sanitize-v850e
1455 * v850-dis.c (disassemble): Add support for v850EA instructions.
1457 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1458 (v850_opcodes): Add v850EA instructions.
1460 * v850-dis.c (disassemble): Add support for v850E instructions.
1462 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1463 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1464 insert_spe, extract_spe): New Functions.
1465 (v850_opcodes): Add v850E instructions.
1468 * v850-opc.c: Reorganised and re-layed out to improve readability
1471 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1473 * configure: Rebuild with autoconf 2.12.1.
1475 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1477 * aclocal.m4, configure: Rebuild with new automake patches.
1479 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1481 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1482 * acinclude.m4: Just include acinclude.m4 from BFD.
1483 * aclocal.m4, configure: Rebuild.
1485 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1487 * Makefile.am: New file, based on old Makefile.in.
1488 * acconfig.h: New file.
1489 * acinclude.m4: New file.
1490 * stamp-h.in: New file.
1491 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1492 Removed shared library handling; now handled by libtool. Replace
1493 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1494 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1495 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1496 handling in AC_OUTPUT.
1497 * dep-in.sed: Change .o to .lo.
1498 * Makefile.in: Now built with automake.
1499 * aclocal.m4: Now built with aclocal.
1500 * config.in, configure: Rebuild.
1502 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1504 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1506 start-sanitize-r5900
1507 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1509 * mips-opc.c: Fix coding of mtsa.
1512 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1514 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1516 * sparc-dis.c (sorted_opcodes): New static local.
1517 (struct opcode_hash): `opcode' is pointer to const element.
1518 (build_hash): First arg is now table of sorted pointers.
1519 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1520 (compare_opcodes): Update.
1522 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1524 * cgen-opc.c: #include <ctype.h>.
1525 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1526 Handle case insensitive hashing.
1527 (hash_keyword_value): Change type of `value' to unsigned int.
1529 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1531 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1532 precision FP, mark it as such. Likewise for double precision
1533 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1535 start-sanitize-r5900
1536 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1539 start-sanitize-r5900
1540 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1542 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1543 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1546 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1548 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1550 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1551 nesting depth when all the macros are expanded.
1553 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1555 * sparc-opc.c: The fcmp v9a instructions take an integer register
1556 as a destination, not a floating point register. From Christian
1557 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1559 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1561 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1562 syntax. From Roman Hodek
1563 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1565 * i386-dis.c (twobyte_has_modrm): Fix pand.
1567 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1569 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1571 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1573 * arm-dis.c: Add prototypes for arm_decode_shift and
1576 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1578 * mips-opc.c: Add r3900 insns.
1580 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1582 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1583 print delay slot instructions on the same line. When using a PC
1584 relative load, add a comment with the value being loaded if it can
1587 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1589 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1590 to pushS/popS for segment regs and byte constant so that
1591 pushw/popw printed when in 16 bit data mode.
1593 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1594 print cbtw, cwtd in 16 bit data mode.
1595 * i386-dis.c (putop): extra case W to support above.
1597 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1598 address size prefix in 16 bit address mode.
1600 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1602 * sh-dis.c: Reindent. Rename local variable fprintf to
1605 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1607 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1609 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1611 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1613 * mips16-opc.c (mip16_opcodes): same.
1615 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1617 * m68k-opc.c (moveb): Change $d to %d.
1619 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1621 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1622 (twobyte_has_modrm): Likewise.
1624 (OP_MMX, OP_EM, OP_MS): New static functions.
1626 * i386-dis.c: Revert patch of April 4. The output now matches
1629 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1631 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1634 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1636 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1638 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1640 * Makefile.in (install): Depend upon installdirs.
1641 (installdirs): New target.
1643 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1645 From Thomas Graichen <graichen@rzpd.de>:
1646 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1647 * configure: Rebuild.
1649 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1651 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1652 Delete string{,s}.h support.
1654 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1656 * cgen-asm.c (cgen_parse_operand_fn): New global.
1657 (cgen_parse_{{,un}signed_integer,address}): Update call to
1658 cgen_parse_operand_fn.
1659 (cgen_init_parse_operand): New function.
1660 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1661 from cgen_asm_init_parse.
1662 (m32r_cgen_assemble_insn): New operand `errmsg'.
1663 Delete call to as_bad, return error message to caller.
1664 (m32r_cgen_asm_hash_keywords): #if 0 out.
1666 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1668 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1670 [case 'J']: Fix typo in register name.
1672 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1674 * configure.in: Substitute SHLIB_LIBS.
1675 * configure: Rebuild.
1676 * Makefile.in (SHLIB_LIBS): New variable.
1677 ($(SHLIB)): Use $(SHLIB_LIBS).
1679 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1681 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1683 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1685 * disassemble.c (disassembler): Handle m32r.
1687 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1689 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1690 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1691 * Makefile.in (CFILES): Add them.
1692 (ALL_MACHINES): Add them.
1693 (dependencies): Regenerate.
1694 * configure.in (cgen_files): New variable.
1695 (bfd_m32r_arch): Add entry.
1696 * configure: Regenerate.
1698 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1700 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1701 * configure: Rebuild.
1703 * Makefile.in: Rebuild dependencies.
1705 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1707 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1710 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1712 * Branched binutils 2.8.
1714 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1716 * m10200-dis.c: Rename from mn10200-dis.c.
1717 * m10200-opc.c: Rename from mn10200-opc.c.
1718 * m10300-dis.c: Rename from mn10300-dis.c
1719 * m10300-opc.c: Rename from mn10300-opc.c.
1720 * Makefile.in: Update accordingly.
1722 * mips16-opc.c: Add mul and dmul macros.
1724 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1726 * makefile.vms: Update CFLAGS, add clean target.
1728 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1730 * mips-opc.c: Add "wait". From Ralf Baechle
1731 <ralf@gnu.ai.mit.edu>.
1733 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1734 * configure, config.in: Rebuild.
1735 * sysdep.h: Include <stdlib.h> if it exists.
1736 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1738 * Makefile.in: Rebuild dependencies.
1740 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1742 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1743 Andrew Bray <andy@madhouse.demon.co.uk>.
1745 * mips-opc.c: Add cast when setting mips_opcodes.
1747 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1749 * v850-dis.c (disassemble): Fix sign extension problem.
1750 * v850-opc.c (extract_d*): Fix sign extension problems to make
1751 disassembly calculate branch offsets correctly.
1753 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1755 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1757 * mips-opc.c: Add dctr and dctw.
1760 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1762 * d30v-dis.c (print_insn): Change the way signed constants
1765 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1767 * Makefile.in (BFD_H): New variable.
1768 (HFILES): New variable.
1769 (CFILES): Add all C files.
1770 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1771 Delete old dependencies, and build new ones.
1772 * dep-in.sed: New file.
1774 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1776 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1778 start-sanitize-coldfire
1779 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1781 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1784 end-sanitize-coldfire
1785 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1787 * mn10200-opc.c: Change "trap" to "syscall".
1788 * mn10300-opc.c: Add new "syscall" instruction.
1790 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1792 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1793 mulul insns on the coldfire.
1795 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1797 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1798 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1799 (print_insn_little_arm): Likewise.
1801 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1803 Based on patches from H.J. Lu <hjl@lucon.org>:
1804 * i386-dis.c (fetch_data): Add prototype.
1805 * m68k-dis.c (fetch_data): Add prototype.
1806 (dummy_print_address): Add prototype. Make static.
1807 * ppc-opc.c (valid_bo): Add prototype.
1808 * sparc-dis.c (build_hash_table): Add prototype.
1809 (is_delayed_branch, compute_arch_mask): Add prototypes.
1810 (print_insn_sparc): Make several local variables const.
1811 (compare_opcodes): Change arguments to const PTR. Add prototype.
1812 * sparc-opc.c (arg): Change name field to be const.
1813 (lookup_name, lookup_value): Add prototypes. Change table and
1814 name parameters to be const.
1815 (sparc_encode_asi): Change name parameter to be const.
1816 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1817 (sparc_encode_sparclet_cpreg): Likewise.
1818 (sparc_decode_asi): Change return type to be const.
1819 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1820 (sparc_decode_sparclet_cpreg): Likewise.
1822 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1824 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1825 Solaris doesn't like the combined options, and the -f is
1827 (stamp-tshlink, install): Likewise.
1829 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1831 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1834 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1836 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1838 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1840 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1843 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1845 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1847 start-sanitize-tic80
1848 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1850 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1852 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1854 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1857 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1859 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1860 floatformat_to_double to make portable.
1861 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1864 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1866 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1867 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1869 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1871 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1872 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1874 start-sanitize-tic80
1875 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1877 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1878 (OFF_SL_BR_SCALED): ... to this, and added the flag
1879 TIC80_OPERAND_BASEREL to the flags word.
1880 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1884 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1886 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1887 Change mips_opcodes from const array to a pointer,
1888 and change bfd_mips_num_opcodes from const int to int,
1889 so that we can increase the size of the mips opcodes table
1892 start-sanitize-tic80
1893 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1895 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1896 store BITNUM values in the table in one's complement form
1897 to match behavior when assembler is given a raw numeric
1898 value for a BITNUM operand.
1899 * tic80-dis.c (print_operand_bitnum): Ditto.
1903 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1905 * d30v-opc.c: Removed references to FLAG_X.
1908 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1910 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1913 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1915 * Makefile.in: Added d30v object files.
1916 * configure: (bfd_d30v_arch) Rebuilt.
1917 * configure.in: (bfd_d30v_arch) Added new case.
1918 * d30v-dis.c: New file.
1919 * d30v-opc.c: New file.
1920 * disassemble.c (disassembler) Add entry for d30v.
1923 start-sanitize-tic80
1924 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1926 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1927 representations for the floating point BITNUM values.
1929 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1931 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1932 in the table in one's complement form, as they appear in the
1934 (tic80_symbol_to_value): Use macros to access predefined
1936 (tic80_value_to_symbol): Ditto.
1937 (tic80_next_predefined_symbol): New function.
1938 * tic80-dis.c (print_operand_bitnum): Remove code that did
1939 one's complement for BITNUM values.
1942 start-sanitize-r5900
1943 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1945 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1948 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1950 * makefile.vms: Remove 8 bit characters. Update to latest
1953 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1955 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1957 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1959 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1960 (IMM24_PCREL): Likewise.
1962 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1964 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1965 address for an extended PC relative instruction that is not a
1968 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1970 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1973 start-sanitize-tic80
1974 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1976 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1977 (tic80_opcodes): Sort entries so that long immediate forms
1978 come after short immediate forms, making it easier for
1979 assembler to select the right one for a given operand.
1982 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1984 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1986 (print_insn_mips16): Likewise.
1988 start-sanitize-r5900
1989 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1991 * mips-opc.c: add r5900.
1994 start-sanitize-tic80
1995 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1997 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1998 a symbol class that restricts translation to just that
1999 class (general register, condition code, etc).
2001 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2003 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2004 and REG_DEST_E for register operands that have to be
2005 an even numbered register. Add REG_FPA for operands that
2006 are one of the floating point accumulator registers.
2007 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2008 (tic80_opcodes): Change entries that need even numbered
2009 register operands to use the new operand table entries.
2010 Add "or" entries that are identical to "or.tt" entries.
2013 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2015 * mips16-opc.c: Add new cases of exit instruction for
2017 * mips-dis.c (print_mips16_insn_arg): Display floating point
2018 registers in operands of exit instruction. Print `$' before
2019 register names in operands of entry and exit instructions.
2021 start-sanitize-tic80
2022 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2024 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2025 pairs for all predefined symbols recognized by the assembler.
2026 Also used by the disassembling routines.
2027 (tic80_symbol_to_value): New function.
2028 (tic80_value_to_symbol): New function.
2029 * tic80-dis.c (print_operand_control_register,
2030 print_operand_condition_code, print_operand_bitnum):
2031 Remove private tables and use tic80_value_to_symbol function.
2034 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2036 * d10v-dis.c (print_operand): Change address printing
2037 to correctly handle PC wrapping. Fixes PR11490.
2039 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2041 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2044 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2046 * mips-dis.c (print_insn_mips16): Set insn_info information.
2047 (print_mips16_insn_arg): Likewise.
2049 * mips-dis.c (print_insn_mips16): Better handling of an extend
2050 opcode followed by an instruction which can not be extended.
2052 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2054 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2055 coldfire moveb instruction to not allow an address register as
2056 destination. Although the documentation does not indicate that
2057 this is invalid, experiments uncovered unexpected behavior.
2058 Added a comment explaining the situation. Thanks to Andreas
2059 Schwab for pointing this out to me.
2061 start-sanitize-tic80
2062 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2064 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2065 entries are presorted so that entries with the same mnemonic are
2066 adjacent to each other in the table. Sort the entries for each
2067 instruction so that this is true.
2070 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2072 * m68k-dis.c: Include <libiberty.h>.
2073 (print_insn_m68k): Sort the opcode table on the most significant
2074 nibble of the opcode.
2076 start-sanitize-tic80
2077 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2079 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2080 "vsub", "vst", "xnor", and "xor" instructions.
2081 (V_a1): Renamed from V_a, msb of accumulator reg number.
2082 (V_a0): Add macro, lsb of accumulator reg number.
2084 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2086 * tic80-dis.c (print_insn_tic80): Broke excessively long
2087 function up into several smaller ones and arranged for
2088 the instruction printing function to be callable recursively
2089 to print vector instructions that have both a load and a
2090 math instruction packed into a single opcode.
2091 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2092 to explain why it comes after the other vector opcodes.
2095 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2097 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2098 move insns to handle immediate operands.
2100 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2102 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2103 fix operand mask in the "moveml" entries for the coldfire.
2105 start-sanitize-tic80
2106 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2108 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2109 New macros for building vector instruction opcodes.
2110 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2111 FMT_LI, which were unused. The field is now a flags field.
2112 Remove some opcodes that are possible, but illegal, such
2113 as long immediate instructions with doubles for immediate
2114 values. Add "vadd" and "vld" instructions.
2116 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2118 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2119 the order more logical. Move the shift alias instructions ("rotl",
2120 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2121 interspersed with the regular sr.x and sl.x instructions. Add
2122 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2123 "sub", "subu", "swcr", and "trap".
2125 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2127 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2128 (OFF_SL_PC): Renamed from OFF_SL.
2129 (OFF_SS_BR): New operand type for base relative operand.
2130 (OFF_SL_BR): New operand type for base relative operand.
2131 (REG_BASE): New operand type for base register operand.
2132 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2133 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2134 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2136 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2137 10 char field, padded with spaces on rhs, rather than a string
2138 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2139 than old TIC80_OPERAND_RELATIVE. Add support for new
2140 TIC80_OPERAND_BASEREL flag bit.
2142 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2144 * tic80-dis.c (print_insn_tic80): Print floating point operands
2146 * tic80-opc.c (SPFI): Add single precision floating point
2147 immediate operand type.
2148 (ROTATE): Add rotate operand type for shifts.
2149 (ENDMASK): Add for shifts.
2150 (n): Macro for the 'n' bit.
2151 (i): Macro for the 'i' bit.
2152 (PD): Macro for the 'PD' field.
2153 (P2): Macro for the 'P2' field.
2154 (P1): Macro for the 'P1' field.
2155 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2159 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2161 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2162 adding in current address for pc-relative operands.
2164 start-sanitize-tic80
2165 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2167 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2168 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2169 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2170 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2171 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2172 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2173 (REG_SCALED, LSI_SCALED): New operand types.
2174 (E): New macro for 'E' bit at bit 27.
2175 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2176 opcodes, including the various size flavors (b,h,w,d) for
2177 the direct load and store instructions.
2179 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2181 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2183 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2184 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2185 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2186 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2187 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2188 masks with "MASK_* & ~M_*" to get the M bit reset.
2189 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2191 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2193 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2194 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2195 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2197 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2198 CC, SICR, and LICR table entries.
2199 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2200 "bcnd", and "brcr" opcodes.
2203 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2205 * ppc-opc.c (powerpc_operands): Make comment match the
2206 actual fields (no shift field).
2207 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2208 start-sanitize-tic80
2209 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2210 partial implementation, work in progress.
2211 * tic80-opc.c (tic80_operands): Begin construction operands table.
2212 (tic80_opcodes): Continue populating opcodes table and start
2213 filling in the operand indices.
2214 (tic80_num_opcodes): Add this.
2217 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2219 * m68k-opc.c: Add #B case for moveq.
2221 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2223 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2224 before they are used.
2226 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2228 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2229 for "breakpoint" instruction.
2231 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2233 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2234 (dep): Use ALL_CFLAGS rather than CFLAGS.
2236 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2238 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2241 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2243 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2244 start-sanitize-tic80
2245 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2248 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2250 * mips16-opc.c: Add "abs".
2252 start-sanitize-tic80
2253 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2255 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2256 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2257 (disassembler): Add bfd_arch_tic80 support to set disassemble
2258 to print_insn_tic80.
2259 * tic80-dis.c (print_insn_tic80): Add stub.
2261 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2263 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2264 * configure: Regenerate with autoconf.
2265 * tic80-dis.c: Add file.
2266 * tic80-opc.c: Add file.
2269 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2271 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2273 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2275 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2276 (mn10200_opcodes): Use it for some logicals and btst insns.
2277 Add "break" and "trap" instructions.
2279 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2281 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2283 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2285 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2286 relative load or add now depends upon whether the instruction is
2289 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2291 * mn10200-dis.c: Finish writing disassembler.
2292 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2293 Fix mask for "jmp (an)".
2295 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2296 handle endianness issues for mn10300.
2298 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2300 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2302 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2303 instruction. Fix opcode field for "movb (imm24),dn".
2305 * mn10200-opc.c (mn10200_operands): Fix insertion position
2308 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2310 * mn10200-opc.c: Create mn10200 opcode table.
2311 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2312 but moving along nicely.
2314 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2316 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2318 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2320 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2321 specifiers for fmovem* instructions.
2323 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2325 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2327 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2329 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2332 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2334 * mn10300-opc.c: Add some comments explaining the various
2337 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2339 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2341 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2344 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2345 operand specifiers in fmovm* instructions.
2347 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2349 * ppc-opc.c (insert_li): Give an error if the offset has the two
2350 least significant bits set.
2352 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2354 * mips-dis.c (print_insn_mips16): Separate the instruction from
2355 the arguments with a tab, not a space.
2357 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2359 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2362 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2365 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2367 * configure: Rebuild with autoconf 2.12.
2369 Add support for mips16 (16 bit MIPS implementation):
2370 * mips16-opc.c: New file.
2371 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2372 (mips16_reg_names): New static array.
2373 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2374 after seeing a 16 bit symbol.
2375 (print_insn_little_mips): Likewise.
2376 (print_insn_mips16): New static function.
2377 (print_mips16_insn_arg): New static function.
2378 * mips-opc.c: Add jalx instruction.
2379 * Makefile.in (mips16-opc.o): New target.
2380 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2381 * configure: Rebuild.
2383 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2385 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2386 operand specifiers in *save, *restore and movem* instructions.
2388 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2391 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2392 register operands for immediate arithmetic, not, neg, negx, and
2393 set according to condition instructions.
2395 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2396 specifier of the effective-address operand in immediate forms of
2397 arithmetic instructions. The specifier for the immediate operand
2398 notes how and where the constant will be stored.
2400 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2402 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2405 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2408 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2410 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2412 * mn10300-dis.c (disassemble): Handle register lists.
2414 * mn10300-opc.c: Fix handling of register list operand for
2415 "call", "ret", and "rets" instructions.
2417 * mn10300-dis.c (disassemble): Print PC-relative and memory
2418 addresses symbolically if possible.
2419 * mn10300-opc.c: Distinguish between absolute memory addresses,
2420 pc-relative offsets & random immediates.
2422 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2424 (disassemble): Handle SPLIT and EXTENDED operands.
2426 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2428 * mn10300-dis.c: Rough cut at printing some operands.
2430 * mn10300-dis.c: Start working on disassembler support.
2431 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2433 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2435 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2437 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2439 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2441 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2443 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2444 register argument is calls and jmp instructions.
2446 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2448 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2449 getx operand. Fix opcode for mulqu imm,dn.
2451 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2453 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2454 in MN10300_OPERAND_SPLIT operands for how many bits
2455 appear in the basic insn word. Add IMM32_HIGH24,
2456 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2457 (mn10300_opcodes): Use new operands as needed.
2459 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2460 for bset, bclr, btst instructions.
2461 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2463 * mn10300-opc.c (mn10300_operands): Remove many redundant
2464 operands. Update opcode table as appropriate.
2465 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2466 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2468 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2470 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2471 operands (for indexed load/stores). Fix bitpos for DI
2472 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2473 few instructions that insert immediates/displacements in the
2474 middle of the instruction. Add IMM8E for 8 bit immediate in
2475 the extended part of an instruction.
2476 (mn10300_operands): Use new opcodes as appropriate.
2478 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2480 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2481 sequential so the assembler never parallelizes it with
2484 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2486 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2487 a data/address register that appears in register field 0
2488 and register field 1.
2489 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2491 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2493 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2494 standard disassembly.
2496 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2497 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2498 Recategorize PALcode instructions.
2500 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2502 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2504 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2506 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2507 there are no operand types.
2509 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2511 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2513 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2515 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2517 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2519 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2521 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2522 and sst.w instructions.
2524 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2527 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2529 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2532 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2534 * ppc-opc.c (PPCPWR2): Define.
2535 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2538 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2540 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2541 field for movhu instruction.
2543 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2544 cast value to "long" not "signed long" to keep hpux10
2547 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2549 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2552 * mn10300-opc.c (FMT*): Remove definitions.
2554 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2555 for shift-by-register opcodes.
2557 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2558 into [AD][MN][01] for encoding the position of the register
2561 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2563 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2564 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2566 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2568 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2569 Fix various typos. Add "PAREN" operand.
2570 (MEM, MEM2): Define.
2571 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2572 operands. Fix several typos.
2574 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2577 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2579 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2580 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2582 (mn10300_opcodes): Break opcode format out into its own field.
2583 Update many operand fields to deal with signed vs unsigned
2584 issues. Fix one or two typos in the "mov" instruction
2585 opcode, mask and/or operand fields.
2587 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2589 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2590 m68851 wasn't reset.
2592 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2594 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2595 all opcodes. Very rough cut at operands for all opcodes.
2597 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2600 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2602 * mn10200-opc.c, mn10300-opc.c: New files.
2603 * mn10200-dis.c, mn10300-dis.c: New files.
2604 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2605 * disassemble.c: Break mn10x00 support into 10200 and 10300
2607 * configure.in: Likewise.
2608 * configure: Rebuilt.
2610 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2612 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2614 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2616 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2618 * disassemble (ARCH_mn10x00): Define.
2619 (disassembler): Handle bfd_arch_mn10x00.
2620 * configure.in: Recognize bfd_mn10x00_arch.
2621 * configure: Rebuilt.
2623 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2625 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2626 accordingly. Don't declare functions using op_rtn.
2628 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2630 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2631 params to be more standard.
2632 * (disassemble): Print absolute addresses and symbolic names for
2633 branch and jump targets.
2634 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2636 * (v850_opcodes): Add breakpoint insn.
2638 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2640 * m68k-opc.c: Move the fmovemx data register cases before the
2641 other cases, so that they get recognized before the data register
2642 does gets treated as a degenerate register list.
2644 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2646 * mips-opc.c: Add a case for "div" and "divu" with two registers
2647 and a destination of $0.
2649 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2651 * mips-dis.c (print_insn_arg): Add prototype.
2652 (_print_insn_mips): Ditto.
2654 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2656 * mips-dis.c (print_insn_arg): Print condition code registers as
2659 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2661 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2663 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2665 * v850-dis.c (disassemble): Make static. Provide prototype.
2667 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2669 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2672 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2674 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2675 ']' characters into the output stream.
2676 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2677 Add "memop" field to all opcodes (for the disassembler).
2678 Reorder opcodes so that "nop" comes before "mov" and "jr"
2679 comes before "jarl".
2681 * v850-dis.c (print_insn_v850): Fix typo in last change.
2683 * v850-dis.c (print_insn_v850): Properly handle disassembling
2684 a two byte insn at the end of a memory region when the memory
2685 region's size is only two byte aligned.
2687 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2689 * v850-dis.c (v850_reg_names): Define.
2690 (v850_sreg_names, v850_cc_names): Likewise.
2691 (disassemble): Very rough cut at printing operands (unformatted).
2693 * v850-opc.c (BOP_MASK): Fix.
2694 (v850_opcodes): Fix mask for jarl and jr.
2696 * v850-dis.c: New file. Skeleton for disassembler support.
2697 * Makefile.in Remove v850 references, they're not needed here.
2698 * configure.in: Add v850-dis.o when building v850 toolchains.
2699 * configure: Rebuilt.
2700 * disassemble.c (disassembler): Call v850 disassembler.
2702 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2703 (insert_d8_6, extract_d8_6): New functions.
2704 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2705 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2707 (IF4A, IF4B): Use "D7" instead of "D7S".
2708 (IF4C, IF4D): Use "D8_7" instead of "D8".
2709 (IF4E, IF4F): New. Use "D8_6".
2710 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2711 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2713 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2714 (v850_operands): Change D16 to D16_15, use special insert/extract
2715 routines. New new D16 that uses the generic insert/extract code.
2716 (IF7A, IF7B): Use D16_15.
2717 (IF7C, IF7D): New. Use D16.
2718 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2720 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2721 message. Issue an error if the branch offset is odd.
2723 * v850-opc.c: Add notes about needing special insert/extract
2724 for all the load/store insns, except "ld.b" and "st.b".
2726 * v850-opc.c (insert_d22, extract_d22): New functions.
2727 (v850_operands): Use insert_d22 and extract_d22 for
2729 (insert_d9): Fix range check.
2731 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2733 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2734 and set bits field to D9 and D22 operands.
2736 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2738 * v850-opc.c (v850_operands): Define SR2 operand.
2739 (v850_opcodes): "ldsr" uses R1,SR2.
2741 * v850-opc.c (v850_opcodes): Fix opcode specs for
2742 sld.w, sst.b, sst.h, sst.w, and nop.
2744 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2746 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2747 end of the opcode table.
2749 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2751 * d10v-opc.c (pre_defined_registers): Added register pairs,
2752 "r0-r1", "r2-r3", etc.
2754 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2756 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2757 Create I16U for an unsigned 16bit mmediate operand.
2758 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2760 * v850-opc.c (v850_operands): Define EP operand.
2761 (IF4A, IF4B, IF4C, IF4D): Use EP.
2763 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2764 with immediate operand, "movhi". Tweak "ldsr".
2766 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2767 correct. Get sld.[bhw] and sst.[bhw] closer.
2769 * v850-opc.c (v850_operands): "not" is a two byte insn
2771 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2773 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2775 * v850-opc.c (two): Get order of words correct.
2777 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2779 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2780 register source and destination operands.
2781 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2783 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2784 same thinko in "trap" opcode.
2786 * v850-opc.c (v850_opcodes): Add initializer for size field
2789 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2790 Add D8 for 8-bit unsigned field in short load/store insns.
2791 (IF4A, IF4D): These both need two registers.
2792 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2793 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2794 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2795 for "ldsr" and "stsr".
2796 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2799 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2800 short store word (sst.w).
2802 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2804 * v850-opc.c (v850_operands): Added insert and extract fields,
2805 pointers to functions that handle unusual operand encodings.
2807 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2809 * v850-opc.c (v850_opcodes): Enable "trap".
2811 * v850-opc.c (v850_opcodes): Fix order of displacement
2812 and register for "set1", "clr1", "not1", and "tst1".
2814 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2816 * v850-opc.c (v850_operands): Add "B3" support.
2817 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2820 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2822 * v850-opc.c: Close unterminated comment.
2824 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2826 * v850-opc.c (v850_operands): Add flags field.
2827 (v850_opcodes): add move opcodes.
2829 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2831 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2832 * configure: (bfd_v850v_arch) Add new case.
2833 * configure.in: (bfd_v850_arch) Add new case.
2834 * v850-opc.c: New file.
2836 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2838 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2840 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2842 * d10v-opc.c: Add additional information to the opcode
2843 table to help determinine which instructions can be done
2846 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2848 * mpw-make.sed: Update editing of include pathnames to be
2851 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2853 * arm-opc.h: Added "bx" instruction definition.
2855 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2857 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2859 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2861 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2863 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2865 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2867 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2869 * makefile.vms: Update for alpha-opc changes.
2871 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2873 * i386-dis.c (print_insn_i386): Actually return the correct value.
2874 (ONE, OP_ONE): #ifdef out; not used.
2876 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2878 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2879 Changed subi operand type to treat 0 as 16.
2881 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2883 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2886 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2888 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2889 memory transfer instructions. Add new format string entries %h and %s.
2890 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2893 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2895 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2896 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2898 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2900 * alpha-dis.c (print_insn_alpha_osf): Remove.
2901 (print_insn_alpha_vms): Remove.
2902 (print_insn_alpha): Make globally visible. Chose the register
2903 names based on info->flavour.
2904 * disassemble.c: Always return print_insn_alpha for the alpha.
2906 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2908 * d10v-dis.c (dis_long): Handle unknown opcodes.
2910 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2912 * d10v-opc.c: Changes to support signed and unsigned numbers.
2913 All instructions with the same name that have long and short forms
2914 now end in ".l" or ".s". Divs added.
2915 * d10v-dis.c: Changes to support signed and unsigned numbers.
2917 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2919 * d10v-dis.c: Change all functions to use info->print_address_func.
2921 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2923 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2924 move ccr/sr insns more strict so that the disassembler only
2925 selects them when the addressing mode is data register.
2927 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2928 * d10v-opc.c (pre_defined_registers): Declare.
2929 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2930 to pick a better name for the registers.
2932 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2934 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2935 operands for fexpand and fpmerge. From Christian Kuehnke
2936 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2938 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2940 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2941 print routine. Take new regnames and cpumask arguments.
2942 Kill the environment variable nonsense.
2943 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2944 (print_insn_alpha_vms): New function. Do VMS style regnames.
2945 * disassemble.c (disassembler): Test bfd flavour to pick
2946 between OSF and VMS routines. Default to OSF.
2948 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2950 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2951 * configure: Rebuild.
2952 * Makefile.in (install): Use @INSTALL_SHLIB@.
2954 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2956 * configure: (bfd_d10v_arch) Add new case.
2957 * configure.in: (bfd_d10v_arch) Add new case.
2958 * d10v-dis.c: New file.
2959 * d10v-opc.c: New file.
2960 * disassemble.c (disassembler) Add entry for d10v.
2962 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2964 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2965 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2967 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2969 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2970 distinguish between variants of the instruction set.
2971 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2972 distinguish between variants of the instruction set.
2974 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2976 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2977 the 8086 instruction set.
2978 * i386-dis.c: General cleanups. Make most things static. Add
2979 prototypes. Get rid of static variables aflags and dflags. Pass
2980 them as args (to almost everything).
2982 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2984 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2986 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2988 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2989 if the next arg is marked with SRC_IN_DST. Gross.
2991 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2992 we're looking for and find EXR.
2994 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2995 if we're looking for KBIT and we don't find it.
2997 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3000 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3001 3bit immediate operands.
3003 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3005 * Released binutils 2.7.
3007 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3008 <kkaempf@progis.ac-net.de>.
3010 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3012 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3014 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3016 * sparc-dis.c (print_insn_sparclite): New routine to print
3017 sparclite instructions.
3019 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3021 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3023 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3025 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3026 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3027 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3029 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3031 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3032 Use autoconf-set values.
3033 (docdir, oldincludedir): Removed.
3034 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3036 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3038 * alpha-opc.c: New file.
3039 * alpha-opc.h: Remove.
3040 * alpha-dis.c: Complete rewrite to use new opcode table.
3041 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3042 * configure: Rebuild with autoconf 2.10.
3043 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3044 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3046 (alpha-opc.o): New target.
3048 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3050 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3051 Set imm_added_to_rs1 even if the source and destination register
3054 * sparc-opc.c: Add some two operand forms of the wr instruction.
3056 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3058 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3061 * disassemble.c (disassembler): Handle H8/S.
3062 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3064 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3066 * sparc-opc.c: Add beq/teq as aliases for be/te.
3068 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3069 <sergei@msil.sps.mot.com>.
3071 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3073 * makefile.vms: New file.
3075 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3077 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3079 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3082 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3084 * i386-dis.c (OP_OFF): Call append_prefix.
3086 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3088 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3089 unsigned long to silence a warning from the Solaris PowerPC
3092 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3094 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3096 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3098 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3100 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3101 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3102 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3103 cpush, cpusha, cpull sparclet insns.
3105 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3107 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3109 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3111 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3112 Set F_FLOAT on other floating point instructions.
3114 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3116 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3118 (powerpc_opcodes): Add 860/821 specific SPRs.
3120 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3122 * configure.in: Permit --enable-shared to specify a list of
3123 directories. Set and substitute BFD_PICLIST.
3124 * configure: Rebuild.
3125 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3126 uses. Set to @BFD_PICLIST@.
3128 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3130 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3131 not "abs", which may be needed for the absolute in something
3132 like btst #0,@10:8. Print L_3 immediates separately from other
3133 immediates. Change ABSMOV reference to ABS8MEM.
3135 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3137 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3138 (current_arch_mask): New static global.
3139 (compute_arch_mask): New static function.
3140 (print_insn_sparc): Delete sparc_v9_p. New static local
3141 current_mach. Resort opcode table if current_mach changes.
3142 Generalize "insn not supported" test.
3143 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3144 Delete test for v9/!v9.
3145 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3147 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3148 (brfcx): Renamed to FBRX.
3149 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3150 coprocessor mnemonics are not supported on the sparclet).
3151 (condf): Renamed to CONDF.
3152 (SLCBCC2): Delete F_ALIAS flag.
3154 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3156 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3157 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3159 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3161 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3162 that the shared library version number is set correctly.
3164 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3166 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3167 Miles Bader <miles@gnu.ai.mit.edu>.
3168 * configure: Rebuild.
3170 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3172 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3175 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3177 * configure: Rebuild with autoconf 2.8.
3179 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3181 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3182 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3184 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3186 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3187 since they appear as targets in Makefile.in.
3188 * configure: Rebuild.
3190 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3192 * mpw-make.sed: Edit out shared library support bits.
3194 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3196 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3197 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3198 (sparc_opcodes): Add sparclet insns.
3199 (sparclet_cpreg_table): New static local.
3200 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3201 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3203 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3205 * i386-dis.c (index16): New static variable.
3206 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3208 (OP_indirE): Return result of OP_E.
3209 (OP_E): Check for 16 bit addressing mode, and disassemble
3210 correctly. Optimised 32 bit case a little. Don't print
3211 "(base,index,scale)" when sib specifies only an offset.
3213 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3215 * configure.in: Set and substitute SHLIB_DEP.
3216 * configure: Rebuild.
3217 * Makefile.in (SHLIB_DEP): New variable.
3218 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3219 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3220 COMMON_SHLIB, add them to piclist with appropriate modifications.
3221 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3222 here: just use piclist.
3224 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3226 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3227 (print_insn_sparc): Rewrite v9/not-v9 tests.
3228 (compare_opcodes): Likewise.
3229 * sparc-opc.c (MASK_<ARCH>): Define.
3230 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3231 (sparclet,v6notv9): Define.
3232 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3233 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3235 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3237 * configure.in: Call AC_PROG_CC before configure.host.
3238 * configure: Rebuild.
3240 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3242 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3244 * i386-dis.c (onebyte_has_modrm): New static array.
3245 (twobyte_has_modrm): New static array.
3246 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3248 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3250 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3253 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3255 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3258 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3260 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3261 m68010up, not just m68020up | cpu32.
3263 * Makefile.in (SONAME): New variable.
3264 ($(SHLINK)): Make a link to the transformed name, as well.
3265 (stamp-tshlink): New target.
3266 (install): Skip stamp-tshlink during install.
3268 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3270 * configure.in: Call AC_ARG_PROGRAM.
3271 * configure: Rebuild.
3272 * Makefile.in (program_transform_name): New variable.
3273 (install): Transform library name before installing it.
3275 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3277 * i960-dis.c (mem): Add HX dcinva instruction.
3279 Support for building as a shared library, based on patches from
3280 Alan Modra <alan@spri.levels.unisa.edu.au>:
3281 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3282 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3283 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3284 * configure: Rebuild.
3285 * Makefile.in (ALLLIBS): New variable.
3286 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3287 (COMMON_SHLIB, SHLINK): New variables.
3288 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3289 (STAGESTUFF): Remove variable.
3290 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3291 (stamp-piclist, piclist): New targets.
3292 ($(SHLIB), $(SHLINK)): New targets.
3293 ($(OFILES)): Depend upon stamp-picdir.
3294 (disassemble.o): Build twice if PICFLAG is set.
3295 (MOSTLYCLEAN): Add pic/*.o.
3296 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3297 (distclean): Remove pic and stamp-picdir.
3298 (install): Install shared libraries.
3299 (stamp-picdir): New target.
3301 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3303 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3304 Print unknown instruction as "unknown", rather than in hex.
3306 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3308 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3310 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3312 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3314 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3316 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3317 when necessary. From Ulrich Drepper
3318 <drepper@myware.rz.uni-karlsruhe.de>.
3320 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3322 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3323 sparc_num_opcodes. Update architecture enum values.
3324 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3325 (sparc_opcode_lookup_arch): New function.
3326 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3327 (sparc_opcodes): Add v9a shutdown insn.
3329 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3331 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3332 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3334 (print_insn_sparc64): Deleted.
3335 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3338 * sparc-opc.c (architecture_pname): Add v9a.
3340 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3342 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3343 incorrectly defined as 0x16 when it should be 0x15.
3344 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3345 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3346 excb (exception barrier) which is defined in the Alpha
3347 Architecture Handbook version 2.
3348 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3349 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3350 disassembled as or, for example.
3352 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3354 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3355 (_print_insn_mips): Change i from int to unsigned int.
3357 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3359 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3360 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3362 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3364 * i386-dis.c: Added Pentium Pro instructions.
3366 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3368 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3371 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3373 * sh-opc.h (sh_nibble_type): Added REG_B.
3374 (sh_arg_type): Added A_REG_B.
3375 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3377 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3379 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3381 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3383 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3385 * Makefile.in (distclean): Remove stamp-h. From Ronald
3386 F. Guilmette <rfg@monkeys.com>.
3388 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3390 From David Mosberger-Tang <davidm@azstarnet.com>:
3391 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3394 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3396 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3397 (sh_table): Added many SH3 opcodes.
3398 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3400 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3402 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3403 (subco,subco.): Mark this PPC, not PPCCOM.
3405 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3407 * configure: Rebuild with autoconf 2.7.
3409 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3411 * configure: Rebuild with autoconf 2.6.
3413 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3415 * configure.in: Sort list of architectures. Accept but do nothing
3416 for alliant, convex, pyramid, romp, and tahoe.
3418 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3420 * a29k-dis.c (print_special): Change num to unsigned int.
3422 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3424 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3427 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3429 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3430 * configure: Rebuilt.
3432 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3434 * configure.in: Add case for bfd_i860_arch.
3435 * configure: Rebuild.
3437 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3439 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3440 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3441 (NEXTDOUBLE): Likewise.
3442 (print_insn_m68k): Don't match fmoveml if there is more than one
3443 register in the list.
3444 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3446 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3448 * m68k-opc.c: Use #W rather than #w.
3449 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3451 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3453 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3454 and likewise for all the dbxx opcodes.
3456 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3458 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3460 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3462 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3463 the VR4100 specific instructions to the mips_opcodes structure.
3465 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3467 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3468 ugly Metrowerks bug in CW6, is fixed in CW7.
3470 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3472 * ppc-opc.c (whole file): Add flags for common/any support.
3474 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3476 * Makefile.in (BISON): Remove macro.
3477 (FLAGS_TO_PASS): Remove BISON.
3479 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3481 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3483 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3484 instructions that take no args by looking at the match mask.
3485 (print_insn_arg): Always print "%" before register names.
3486 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3487 [case '_']: Don't print "@#" before address.
3488 [case 'J']: Use "%s" as format string, not register name.
3489 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3491 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3493 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3496 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3498 From David Mosberger-Tang <davidm@azstarnet.com>
3500 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3501 (alpha_insn_set): added definitions for VAX floating point
3502 instructions (Unix compilers don't generate these, but handcoded
3503 assembly might still use them).
3505 * alpha-dis.c (print_insn_alpha): added support for disassembling
3506 the miscellaneous instructions in the Alpha instruction set.
3508 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3510 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3511 no longer create sysdep.h, sed ppc-opc.c to work around a
3512 serious Metrowerks C bug.
3513 * mpw-make.in: Remove.
3514 * mpw-make.sed: New file, used by mpw-configure to edit
3515 Makefile.in into an MPW makefile.
3517 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3519 * Makefile.in (maintainer-clean): New synonym for realclean.
3521 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3523 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3524 which use '0', '1', and '2' instead. Specify the proper size for
3525 a pmove immediate operand. Correct the pmovefd patterns to be
3526 moves to a register, not from a register.
3527 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3529 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3531 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3532 %psr, %wim, %tbr as F_NOTV9.
3534 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3536 * Makefile.in (Makefile): Just rebuild Makefile when running
3538 (config.h, stamp-h): New targets.
3539 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3540 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3541 rebuilding config.h.
3542 * configure: Rebuild.
3544 * mips-opc.c: Change unaligned loads and stores with "t,A"
3545 operands to use "t,A(b)".
3547 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3549 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3551 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3553 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3554 until 3 instead of until 2.
3556 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3558 * Makefile.in (ALL_CFLAGS): Define.
3559 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3560 (MOSTLYCLEAN): Add config.log.
3561 (distclean): Don't remove config.log.
3562 * configure.in: Substitute HDEFINES.
3563 * configure: Rebuild.
3565 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3567 * sh-opc.h (sh_arg_type): Add F_FR0.
3568 (sh_table, case fmac): Add F_FR0 as first argument.
3570 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3572 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3574 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3576 * sparc-dis.c: Remove all references to NO_V9.
3578 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3580 * aclocal.m4: Just include ../bfd/aclocal.m4.
3581 * configure: Rebuild.
3583 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3585 * sparc-dis.c (X_DISP19): Define.
3586 (print_insn, case 'G'): Use it.
3587 (print_insn, case 'L'): Sign extend displacement.
3589 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3591 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3592 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3593 host_makefile_frag or frags.
3594 * aclocal.m4: New file.
3595 * configure: Rebuild.
3596 * Makefile.in (INSTALL): Set to @INSTALL@.
3597 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3598 (INSTALL_DATA): Set to @INSTALL_DATA@.
3600 (AR_FLAGS): Set to rc rather than qc.
3601 (CC): Define as @CC@.
3602 (CFLAGS): Set to @CFLAGS@.
3603 (@host_makefile_frag@): Remove.
3604 (config.status): Remove dependency upon @frags@.
3606 * configure.in: ../bfd/config.bfd now just sets shell variables.
3607 Use them rather than looking through target Makefile fragments.
3608 * configure: Rebuild.
3610 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3612 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3614 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3616 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3617 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3620 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3621 (lookup_{name,value}): New functions.
3622 (prefetch_table): New static local.
3623 (sparc_{encode,decode}_prefetch): New functions.
3624 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3626 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3628 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3631 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3633 * sh-dis.c: Correct comment on first line of file.
3635 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3637 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3639 * sparc-opc.c (asi, membar): New static locals.
3640 (sparc_{encode,decode}_{asi,membar}): New functions.
3641 (sparc_opcodes, membar insn): Fix.
3642 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3643 Support decoding of membar masks.
3646 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3648 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3650 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3652 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3653 and likewise for the other branches. Add bhs as an alias for bcc,
3654 and likewise for the size variants. Add dbhs as an alias for
3657 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3659 * sh-opc.h (FP sts instructions): Update to match reality.
3661 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3663 * m68k-dis.c: (fpcr_names): Add % before all register names.
3664 (reg_names): Likewise.
3665 (print_insn_arg): Don't explicitly print % before register names.
3666 Add % before register names in static array names. In case 'r',
3667 print data registers as `@(Dn)', not `Dn@'. When printing a
3668 memory address, don't print @# before it.
3669 (print_indexed): Change base_disp and outer_disp from int to
3670 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3671 syntax. Sign extend 8 byte displacement correctly.
3672 (print_base): Print using MIT syntax. Print zpc when appropriate.
3673 Change parameter disp from int to bfd_vma.
3675 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3678 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3680 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3681 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3682 * sh-opc.h (sh_arg_type): Add new operand types.
3683 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3685 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3687 * Makefile.in (distclean): Remove generated file config.h.
3689 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3691 * Makefile.in (distclean): Remove generated file config.h.
3693 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3695 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3697 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3699 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3700 rather than numopcodes. Use m68k_opcodes rather than removed
3701 opcode function. Don't check F_ALIAS.
3702 (print_insn_arg): Change first parameter to be const char *.
3703 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3704 (m68k-opc.o): New target.
3705 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3706 * configure: Rebuild.
3708 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3710 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3711 (opcode_bits, opcode_hash_table): New variables.
3712 (opcodes_initialized): Renamed from opcodes_sorted.
3713 (build_hash_table): New function.
3714 (is_delayed_branch): Use hash table.
3715 (print_insn): Renamed from print_insn_sparc, made static.
3716 Build and use hash table. If !sparc64, ignore sparc64 insns,
3717 and vice-versa if sparc64.
3718 (print_insn_sparc, print_insn_sparc64): New functions.
3719 (compare_opcodes): Move sparc64 opcodes to end.
3720 Print commutative insns with constant second.
3721 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3723 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3725 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3726 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3727 avoids printing a delay slot in a delay slot.
3728 * sh-opc.h (sh_table): Fully bracket last entry.
3730 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3732 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3734 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3736 * configure.in: Get host_makefile_frag from ${srcdir}.
3738 * configure.in: Autoconfiscated. Check for string[s].h. Create
3739 config.h from config.in. Don't set up sysdep.h link.
3740 * sysdep.h: New file.
3741 * configure, config.in: New files, generated from configure.in.
3742 * Makefile.in: Updated to be processed autoconf-style.
3743 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3744 (Makefile): Depend on config.status.
3745 (config.status): New rule.
3746 * configure.bat: Update Makefile substitutions.
3748 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3750 * mips-opc.c (L1): Define.
3751 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3752 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3755 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3757 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3758 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3759 have multiple add units but only a single logical unit.
3761 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3762 shifted by 18, without any insertion or extraction function.
3763 (insert_cr, extract_cr): Remove.
3765 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3767 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3770 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3772 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3773 * sh-opc.h: Add copyright.
3775 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3777 * Makefile.in (crunch-m68k): Delete extra target accidentally
3778 checked in a while ago.
3780 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3782 * sh-opc.h (sh_table): Add SH3 support.
3784 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3786 * sh-opc.h: Added bsrf and braf.
3788 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3790 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3791 bogus [ls]fm{ea,fd} patterns.
3793 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3794 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3795 initialize it from memory. Make function static.
3796 (print_insn_{big,little}_arm): New functions.
3797 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3798 the correct endianness.
3800 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3802 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3805 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3807 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3808 17th, so that it builds again using GCC as the compiler.
3810 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3812 * mips-dis.c (print_insn_little_mips): Cast return value from
3813 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3814 expects an unsigned long, and that might be fewer words of
3815 argument storage (e.g., if bfd_vma is long long on a 32-bit
3817 (print_insn_big_mips): Likewise with bfd_getb32 value.
3818 (_print_insn_mips): Now static.
3820 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3822 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3823 gcc memory hog problem with initializer is fixed.
3825 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3827 Merge in support for Mac MPW as a host.
3828 (Old change descriptions retained for informational value.)
3830 * mpw-config.in (archname): Compute from the config.
3831 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3833 * mpw-config.in (target_arch): Compute from canonical target.
3834 (m68k, mips, powerpc, sparc): Add architectures.
3835 * mpw-make.in (disassemble.c.o): Add.
3836 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3838 * mpw-config.in (BFD_MACHINES): Set to a default value.
3839 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3841 * mpw-make.in (CSEARCH): Add extra-include to search path.
3843 * mpw-config.in (varargs.h): Don't create.
3844 (sysdep.h): Create using forward-include.
3845 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3847 * mpw-config.in: New file, MPW version of configure.in.
3848 * mpw-make.in: New file, MPW version of Makefile.in.
3850 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3852 * alpha-dis.c (print_insn_alpha): Put empty statement after
3855 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3857 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3858 (low_sign_extend): Likewise.
3859 (get_field): Delete unused function.
3860 (set_field, deposit_14, deposit_21): Likewise.
3862 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3864 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3867 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3869 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3871 * alpha-opc.h (OSF_ASMCODE): define
3872 print pal-code names as defined in App C of the
3873 Alpha Architecture Reference Manual
3875 * alpha-dis.c: cleaned up output
3876 print stylized code forms as defined in App A.4.3 of the
3877 Alpha Architecture Reference Manual
3879 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3881 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3883 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3886 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3888 * m68k-dis.c (opcode): New function. Returns address of opcode
3889 table entry given index, even if the opcode table was split to
3890 work around gcc bugs.
3891 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3893 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3894 (reg_names): Now const.
3895 (print_insn_arg): Arrays cacheFieldName and names now const.
3896 (print_indexed): Array scales now const.
3898 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3900 * ppc-opc.c: Sort recently added instructions by minor opcode
3901 number within major opcode number.
3903 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3905 * hppa-dis.c: Include libhppa.h.
3907 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3909 * mips-opc.c: Change dli to use M_DLI, and add dla.
3911 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3913 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3915 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3917 * mips-opc.c: Add r4650 mul instruction.
3919 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3921 * mips-opc.c: Add uld and usd macros for unaligned double load and
3924 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3926 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3927 mfdcr, mtdcr, icbt, iccci.
3929 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3931 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3932 signed char fields to shorts, more portable.
3934 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3936 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3937 char fields as signed chars, since they may have negative values.
3939 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3941 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3942 (mycroft@netbsd.org).
3944 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3946 From "Logg, Ed" <elogg@ea.com>:
3947 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3948 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3951 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3953 * ppc-opc.c: Changes based on patch from David Edelsohn
3954 <edelsohn@mhpcc.edu>.
3955 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3958 (insert_tbr): New static function.
3959 (extract_tbr): New static function.
3960 (XFXFXM_MASK, XFXM): Define.
3961 (XSPRBAT_MASK, XSPRG_MASK): Define.
3962 (powerpc_opcodes): Add instructions to access special registers by
3963 name. Add mtcr and mftbu.
3965 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3967 * mips-opc.c (P3): Define.
3968 (mips_opcodes): Add mad and madu.
3970 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3972 * configure.in: Add W65 support.
3973 * disassemble.c: Likewise.
3974 * w65-opc.h, w65-dis.c: New files.
3976 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3978 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3981 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3983 * mips-opc.c: Add dli as a synonym for li.
3985 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3987 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3988 print something for reserved opcode values, even if it won't
3991 * mips-dis.c (_print_insn_mips): When initializing, shift right
3992 and mask, to avoid sign extension problems on the Alpha.
3994 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3997 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3999 * sh-opc.h (mov.l gbr): Get direction right.
4000 * sh-dis.c (print_insn_shx): New function.
4001 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4002 print opcodes with right byte order.
4004 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4006 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4007 to avoid conflicts with getopt.
4009 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4011 * hppa-dis.c (print_insn_hppa): Read the instruction using
4012 bfd_getb32, so that it works on a little endian or 64 bit host.
4013 Remove unused local variable op.
4015 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4017 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4018 addu does not work correctly if -mips3.
4020 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4022 * a29k-dis.c (print_special): Add special register names defined
4023 on 29030, 29040 and 29050.
4024 (print_insn): Handle new operand type 'I'.
4026 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4028 * Makefile.in (INSTALL): Use top level install.sh script.
4030 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4032 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4033 that it works on a little endian host.
4035 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4037 * configure.in: Use ${config_shell} when running config.bfd.
4039 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4041 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4043 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4045 * a29k-dis.c (print_insn): Print the opcode.
4047 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4049 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4051 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4053 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4055 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4057 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4058 which store a value into memory.
4060 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4062 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4063 * arm-dis.c, arm-opc.h: New files.
4065 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4067 * Makefile.in (ns32k-dis.o): Add dependency.
4068 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4069 string, not as array of chars.
4071 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4073 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4075 * sparc-opc.c: Added sparclite extended FP operations, and
4076 versions of v9 impdep* instructions permitting specification of
4079 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4081 * i960-dis.c (reg_names): Now const.
4082 (struct sparse_tabent): New type, copied from array type in mem
4084 (ctrl): Local static array ctrl_tab now const.
4085 (cobr): Local static array cobr_tab now const.
4086 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4087 static variable mem_tab no longer explicitly initialized. Changed
4088 mem_init to const array of struct sparse_tabent.
4089 (reg): Local static variable reg_tab no longer explicitly
4090 initialized. Changed reg_init to const array of struct
4092 (ea): Local static array scale_tab now const.
4094 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4097 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4099 * configure.bat: the disassember needs to be enabled for
4100 "objdump -d" to work in djgpp.
4102 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4104 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4105 (invalid_float): Enabled general version, doesn't require running
4106 on ns32k host. Changed to take char* argument, and test for
4107 explicitly specified sizes, instead of using sizeof() on host CPU
4109 (INVALID_FLOAT): Cast first argument.
4110 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4111 list_P032, list_M032): Now const.
4112 (optlist, list_search): Made appropriate arguments now point to
4114 (print_insn_arg): Changed static array of one-character-string
4115 pointers into a static const array of characters; fixed sprintf
4116 statement accordingly.
4118 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4120 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4121 from distribution. A ns32k-dis.c from a previous distribution has
4122 been brought up to date and supports the new interface.
4124 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4126 * configure.in: add bfd_ns32k_arch target support.
4128 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4129 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4131 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4133 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4136 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4138 * h8300-dis.c, mips-dis.c: Don't use true and false.
4140 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4142 * configure.in: Change --with-targets to --enable-targets.
4144 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4146 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4147 opcodes to the first instruction with that opcode, to speed
4148 disassembly of large files. From ralphc@pyramid.com (Ralph
4151 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4153 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4155 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4157 * configure.bat: update to latest makefile.in
4159 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4161 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4162 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4163 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4164 slot insn is in a delay slot.
4165 * z8k-opc.h: (resflg): Fix patterns.
4166 * h8500-opc.h Fix CR insn patterns.
4168 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4170 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4171 "cmpl" before POWER versions, so that gas -many uses them.
4173 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4175 * disassemble.c: New file.
4176 * Makefile.in (OFILES): Add disassemble.o.
4177 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4178 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4179 binutils/configure.in.
4181 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4182 opcode being examined.
4184 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4186 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4187 (insert_ral, insert_ram, insert_ras): New functions.
4188 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4189 RAS for store with update.
4191 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4193 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4194 (edelsohn@npac.syr.edu).
4196 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4198 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4201 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4203 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4205 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4207 * ppc-opc.c (powerpc_operands): The signedp field has been
4208 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4209 instead. Add new operand SISIGNOPT.
4210 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4211 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4212 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4215 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4217 * i386-dis.c (struct private): Renamed to dis_private. `private'
4218 is a reserved word for dynix cc.
4220 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4222 * configure.in: Change error message to refer to bfd/config.bfd
4223 rather than bfd/configure.in.
4225 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4227 * ppc-opc.c: Define POWER2 as short alias flag.
4228 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4231 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4233 * i960-dis.c (print_insn_i960): Don't read a second word for
4234 opcodes 0, 1, 2 and 3.
4236 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4238 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4240 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4242 * m68881-ext.c: Removed; no longer used.
4243 * Makefile.in: Changed accordingly.
4245 * m68k-dis.c (ext_format_68881): Don't declare.
4246 (print_insn_m68k): If an instruction uses place 'i', it uses at
4247 least four fixed bytes.
4248 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4249 extended float, convert to double using floatformat_to_double, not
4250 ieee_extended_to_double, and fetch the data before converting it.
4252 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4254 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4255 davidj@ICSI.Berkeley.EDU (David Johnson).
4257 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4259 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4260 PowerPC uses bdnz[l][a].
4262 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4264 * dis-buf.c, i386-dis.c: Include sysdep.h.
4266 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4268 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4270 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4271 by Motorola PowerPC 601 with PPC_OPCODE_601.
4272 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4273 Disassemble Motorola PowerPC 601 instructions as well as normal
4274 PowerPC instructions.
4276 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4278 * i960-dis.c (reg, mem): Just use a static array instead of
4281 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4283 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4284 condition name index if this is for a negated condition.
4286 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4287 Floating point format for 'H' operand is backwards from normal
4288 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4289 operands (fmpyadd and fmpysub), handle bizarre register
4290 translation correctly for single precision format.
4292 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4293 or 'I' operands if the next format specifier is 'M' (fcmp
4294 condition completer).
4296 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4298 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4299 single number giving a bitmask for the MB and ME fields of an M
4300 form instruction. Change NB to accept 32, and turn it into 0;
4301 also turn 0 into 32 when disassembling. Seperated SH from NB.
4302 (insert_mbe, extract_mbe): New functions.
4303 (insert_nb, extract_nb): New functions.
4304 (SC_MASK): Mask out SA and LK bits.
4305 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4306 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4307 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4308 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4309 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4310 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4311 (powerpc_macros): Define table of macro definitions.
4312 (powerpc_num_macros): Define.
4314 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4315 if PPC_OPERAND_NEXT is set.
4317 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4319 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4320 char. Retrieve contents using bfd_getl32 instead of shifting.
4322 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4324 * ppc-opc.c: New file. Opcode table for PowerPC, including
4325 opcodes for POWER (RS/6000).
4326 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4327 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4328 (CFILES): Add ppc-dis.c.
4329 (ppc-dis.o, ppc-opc.o): New targets.
4330 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4332 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4334 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4335 No space before 'u', 'f', or 'N'.
4337 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4339 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4340 farther than we should.
4342 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4344 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4346 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4348 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4350 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4351 needs it, to prevent reading past the end of a section.
4353 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4355 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4356 Removed t,A case for la; always use t,A(b) case.
4358 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4360 From Ted Lemen <mellon@pepper.ncd.com>
4361 * mips-dis.c (print_insn_arg): Handle 'k'.
4362 * mips-opc.c: Make cache use k, not t.
4364 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4366 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4367 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4368 FLOAT_FORMAT_CODE to put out floating point register names.
4370 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4372 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4374 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4376 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4378 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4380 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4381 larger than 32. Moved dsxx32 variants first for disassembler.
4383 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4385 * z8kgen.c, z8k-opc.h: Add full lda information.
4387 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4389 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4390 movb instructions. Any necessary space will be emitted by
4391 the code to handle nullification completers.
4393 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4395 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4397 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4399 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4400 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4402 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4404 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4406 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4408 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4409 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4411 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4413 * m88k-dis.c (m88kdis): comment change. Remove space after
4415 (printop): handle new arg types DEC and XREG for m88110.
4417 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4419 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4420 type for absolute branch addresses. Delete special
4421 "ble" and "be" code in 'W' operand code.
4423 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4425 * mips-opc.c: Set hazard information correctly for branch
4426 likely instructions.
4428 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4430 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4431 info->fprintf_func for printing and info->print_address_func for
4434 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4436 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4438 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4440 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4441 Corrected second case of "b" for disassembler.
4443 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4445 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4446 to BFD swapping routines to correspond to BFD name changes.
4448 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4450 * mips-opc.c: Change div machine instruction to be z,s,t rather
4451 than s,t. Change div macro to be d,v,t rather than d,s,t.
4452 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4453 rem and remu which generates only the corresponding div
4454 instruction. This is for compatibility with the MIPS assembler,
4455 which only generates the simple machine instruction when an
4456 explicit destination of $0 is used.
4457 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4459 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4461 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4462 WR_31 hazard for bal, bgezal, bltzal.
4464 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4466 * hppa-dis.c (print_insn_hppa): Use print function
4467 from within the disassemble_info, not fprintf_filtered.
4469 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4471 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4472 Law, law@cs.utah.edu.)
4474 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4476 * mips-opc.c ("absu"): Removed.
4479 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4481 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4482 Changed hazard information to distinguish between memory load
4483 delays and coprocessor load delays.
4485 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4487 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4489 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4491 * configure.in: Don't pass cpu to config.bfd.
4493 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4495 * m88k-dis.c (m88kdis): Make class unsigned.
4497 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4499 * alpha-dis.c (print_insn_alpha): One branch format case was
4500 missing the instruction name.
4502 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4504 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4505 Add the arch-specific auxiliary files.
4506 (OFILES): Remove the arch-specific auxiliary files
4507 and use BFD_MACHINES instead of DIS_LIBS.
4508 * configure.in: Set BFD_MACHINES based on --with-targets option.
4510 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4512 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4515 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4517 * sparc-opc.c: Change CONST to const to deal with gcc
4518 -Dconst=__const -traditional.
4520 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4522 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4523 coprocessor instructions out of #if 0, and made them use new
4526 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4528 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4530 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4532 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4533 instruction, for use by the disassembler.
4535 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4536 hand-coded sign extensions that depended on 32-bit host ints.
4537 FIXME, we still depend on big-endian host bitfield ordering.
4538 (sparc_print_insn): Set the insn_info_valid field, and the
4539 other fields that describe the instruction being printed.
4541 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4543 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4544 `jmp' instead of just one of them.
4546 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4548 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4549 (fput_fp_reg_r): Renamed from fput_reg_r.
4550 (fput_fp_reg): New function.
4551 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4553 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4555 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4557 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4559 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4561 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4562 don't output a space.
4564 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4566 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4568 * mips-opc.c: New file, containing opcode table from
4569 ../include/opcode/mips.h.
4570 * Makefile.in: Add it.
4572 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4574 * m88k-dis.c: New file, moved in from gdb and changed to use the
4575 new dis-asm.h disassembler interface.
4576 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4577 (m88k-dis.o): New target.
4579 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4581 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4582 argument string const char * to correspond to opcode/mips.h.
4584 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4586 * mips-dis.c: Updated to account for name changes in new version
4588 * Makefile.in: Added header file dependencies.
4590 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4592 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4594 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4596 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4597 extend, rather than shifts.
4599 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4601 * Makefile.in: Undo 15 June change.
4603 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4605 * m68k-dis.c (print_insn_arg): Change return value to byte count
4607 * m68k-dis.c: Re-write to detect invalid operands before
4608 printing anything, so we can handle this the same way we
4609 handle invalid opcodes.
4611 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4613 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4615 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4617 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4620 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4622 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4624 * configure.in: Do make sysdep.h link.
4625 * Makefile.in: Search ../include. Don't search ../bfd.
4627 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4629 Changes from Jeff Law, law@cs.utah.edu:
4630 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4631 Do not print a space before the completers specified by
4634 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4636 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4637 defined, since gdb has been fixed.
4639 Changes from Jeff Law, law@cs.utah.edu:
4640 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4641 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4642 be a *disassemble_info, not a *FILE.
4643 * hppa-dis.c: Support 'd', '!', and 'a'.
4644 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4645 * hppa-dis.c: Delete cases which are no longer needed.
4647 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4649 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4651 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4653 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4656 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4658 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4659 * configure.in: No longer need to configure to get sysdep.h.
4661 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4663 * Patches from Jeffrey Law <law@cs.utah.edu>.
4664 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4665 templates for 1.1 FP computational instructions.
4667 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4669 * h8500-dis.c (print_insn_h8500): Address argument is type
4671 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4674 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4675 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4677 * sparc-dis.c (compare_opcodes): Move static declaration to
4680 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4682 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4683 instruction, remove unimp hack from 'l' argument.
4685 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4687 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4690 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4692 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4693 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4696 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4698 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4699 arrays of string pointers to 2-d arrays of chars, to save
4702 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4704 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4705 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4707 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4709 * hppa-dis.c: New file from Utah, adapted to new disassembler
4711 * Makefile.in: Include it.
4713 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4715 * sh-dis.c, sh-opc.h: New files.
4717 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4719 * alpha-dis.c, alpha-opc.h: New files.
4721 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4723 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4726 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4728 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4730 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4732 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4735 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4737 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4738 and double percent signs a few places.
4740 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4742 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4743 Use info->print_address_func not print_address.
4745 * dis-buf.c (generic_print_address): New function.
4747 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4749 * Makefile.in: Add sparc-dis.c.
4750 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4752 Add `add' instruction to the set that get checked
4753 for a preceding `sethi' in order to print an absolute address.
4754 * (print_insn): Disassembly prefers real instructions.
4755 (is_delayed_branch): Speed up.
4756 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4757 Still missing some float ops, and needs testing.
4758 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4759 F_ALIAS. Use printf, not fprintf, when not passing a file
4761 (compare_opcodes): Check that identical instructions have
4762 identical opcodes, complain otherwise.
4765 * Include reg_names.
4767 Use dis-asm.h/read_memory_func interface.
4769 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4771 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4772 deliberately return non-zero to setjmp from longjmp. Otherwise
4773 this code fails to compile.
4775 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4777 * m68k-dis.c: Fix prototype for fetch_arg().
4779 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4781 * dis-buf.c: New file, for new read_memory_func interface.
4782 Makefile.in (OFILES): Include it.
4783 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4784 Use new read_memory_func interface.
4786 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4788 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4789 * h8500-opc.h: Fix couple of opcodes.
4791 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4793 * Makefile.in: add dvi & installcheck targets
4795 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4797 * Makefile.in: Update for h8500-dis.c.
4799 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4801 * h8500-dis.c, h8500-opc.h: New files
4803 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4805 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4806 ../include/dis-asm.h.
4807 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4808 and ../gdb/m68k-pinsn.c).
4809 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4810 and ../gdb/i386-pinsn.c).
4811 * m68881-ext.c: New file. Moved definition of
4812 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4813 * Makefile.in: Adjust for new files.
4814 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4815 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4816 can be dis-assembled.
4818 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4820 * mips-dis.c (print_insn_arg): Now returns void.
4822 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4824 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4825 files that use the macros.
4827 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4829 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4830 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4831 (CFILES): Added mips-dis.c.
4833 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4835 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4836 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4838 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4840 * Makefile.in: Improve *clean rules.
4841 * configure.in: Allow a default host.
4843 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4845 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4846 files include other sysdep files
4848 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4850 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4852 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4854 * configure.in: For host support, use ../bfd/configure.host
4855 so it stays in sync with the ../bfd/hosts database.
4857 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4859 * configure.in: use cpu-vendor-os triple instead of nested cases
4861 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4863 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4864 *always* the wrong one.
4866 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4868 * z8kgen.c: added copyright info
4870 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4872 * z8k-dis.c (unparse_instr): prettier tabs
4873 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4875 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4877 * configure.in: Add ncr* configuration.
4878 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4879 picayune ANSI compilers happy.
4881 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4883 * configure.in (i386): Make i386 and i486 synonymous for now.
4884 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4886 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4888 * Makefile.in (install): Fix typo.
4890 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4892 * Makefile.in (make): Remove obsolete crud.
4893 (sparc-opc.o): Avoid Sun Make VPATH bug.
4895 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4897 * Makefile.in: since there are no SUBDIRS, remove rule and
4898 references of subdir_do.
4900 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4902 * Makefile.in (install): Get the library name right here too.
4903 Don't install bfd.h, since it's unrelated to this library. No
4904 subdirs to recurse into, either.
4905 (CFILES): The source file has a .c suffix, not .o.
4907 * sparc-opc.c: New file, moved from BFD.
4908 * Makefile.in (OFILES): Build it.
4910 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4912 * z8k-dis.c: fixed forward refferences of some declarations.
4914 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4916 * Makefile.in: get the name of the library right
4918 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4920 * z8k-dis.c: knows how to disassemble z8k stuff
4921 * z8k-opc.h: new file full of z8000 opcodes
4925 version-control: never