* tic80-opc.c (tic80_symbol_to_value): Changed to accept
[platform/upstream/binutils.git] / opcodes / ChangeLog
1 start-sanitize-tic80
2 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
3
4         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
5         a symbol class that restricts translation to just that
6         class (general register, condition code, etc).
7
8 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
9
10         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
11         and REG_DEST_E for register operands that have to be
12         an even numbered register.  Add REG_FPA for operands that
13         are one of the floating point accumulator registers.
14         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
15         (tic80_opcodes): Change entries that need even numbered
16         register operands to use the new operand table entries.
17         Add "or" entries that are identical to "or.tt" entries.
18
19 end-sanitize-tic80
20 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
21
22         * mips16-opc.c: Add new cases of exit instruction for
23         disassembler.
24         * mips-dis.c (print_mips16_insn_arg): Display floating point
25         registers in operands of exit instruction.  Print `$' before
26         register names in operands of entry and exit instructions.
27
28 start-sanitize-tic80
29 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
30
31         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
32         pairs for all predefined symbols recognized by the assembler.
33         Also used by the disassembling routines.
34         (tic80_symbol_to_value): New function.
35         (tic80_value_to_symbol): New function.
36         * tic80-dis.c (print_operand_control_register,
37         print_operand_condition_code, print_operand_bitnum):
38         Remove private tables and use tic80_value_to_symbol function.
39
40 end-sanitize-tic80
41 start-sanitize-d10v
42 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
43
44         * d10v-dis.c (print_operand): Change address printing
45         to correctly handle PC wrapping.  Fixes PR11490.
46
47 end-sanitize-d10v       
48 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
49
50         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
51         branchs relaxable.
52
53 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
54
55         * mips-dis.c (print_insn_mips16): Set insn_info information.
56         (print_mips16_insn_arg): Likewise.
57
58         * mips-dis.c (print_insn_mips16): Better handling of an extend
59         opcode followed by an instruction which can not be extended.
60
61 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
62
63         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
64         coldfire moveb instruction to not allow an address register as
65         destination.  Although the documentation does not indicate that
66         this is invalid, experiments uncovered unexpected behavior.  
67         Added a comment explaining the situation.  Thanks to Andreas
68         Schwab for pointing this out to me.
69
70 start-sanitize-tic80
71 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
72
73         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
74         entries are presorted so that entries with the same mnemonic are
75         adjacent to each other in the table.  Sort the entries for each
76         instruction so that this is true.
77         
78 end-sanitize-tic80
79 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
80
81         * m68k-dis.c: Include <libiberty.h>.
82         (print_insn_m68k): Sort the opcode table on the most significant
83         nibble of the opcode.
84
85 start-sanitize-tic80
86 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
87
88         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
89         "vsub", "vst", "xnor", and "xor" instructions.
90         (V_a1): Renamed from V_a, msb of accumulator reg number.
91         (V_a0): Add macro, lsb of accumulator reg number.
92         
93 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
94
95         * tic80-dis.c (print_insn_tic80): Broke excessively long
96         function up into several smaller ones and arranged for
97         the instruction printing function to be callable recursively
98         to print vector instructions that have both a load and a
99         math instruction packed into a single opcode.
100         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
101         to explain why it comes after the other vector opcodes.
102         
103 end-sanitize-tic80
104 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
105
106         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire 
107         move insns to handle immediate operands.
108         
109 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
110
111         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
112         fix operand mask in the "moveml" entries for the coldfire.
113
114 start-sanitize-tic80
115 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
116
117         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
118         New macros for building vector instruction opcodes.
119         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
120         FMT_LI, which were unused.  The field is now a flags field.
121         Remove some opcodes that are possible, but illegal, such
122         as long immediate instructions with doubles for immediate
123         values.  Add "vadd" and "vld" instructions.
124         
125 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
126
127         * tic80-opc.c (tic80_operands): Reorder some table entries to make
128         the order more logical.  Move the shift alias instructions ("rotl",
129         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
130         interspersed with the regular sr.x and sl.x instructions.  Add
131         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
132         "sub", "subu", "swcr", and "trap".
133
134 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
135
136         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
137         (OFF_SL_PC): Renamed from OFF_SL.
138         (OFF_SS_BR): New operand type for base relative operand.
139         (OFF_SL_BR): New operand type for base relative operand.
140         (REG_BASE): New operand type for base register operand.
141         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
142         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
143         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
144         instructions.
145         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
146         10 char field, padded with spaces on rhs, rather than a string
147         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
148         than old TIC80_OPERAND_RELATIVE.  Add support for new
149         TIC80_OPERAND_BASEREL flag bit.
150         
151 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
152
153         * tic80-dis.c (print_insn_tic80): Print floating point operands
154         as floats.
155         * tic80-opc.c (SPFI): Add single precision floating point
156         immediate operand type.
157         (ROTATE): Add rotate operand type for shifts.
158         (ENDMASK): Add for shifts.
159         (n): Macro for the 'n' bit.
160         (i): Macro for the 'i' bit.
161         (PD): Macro for the 'PD' field.
162         (P2): Macro for the 'P2' field.
163         (P1): Macro for the 'P1' field.
164         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
165         "fcmp", and "fdiv". 
166         
167 end-sanitize-tic80
168 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
169
170         * mn10200-dis.c (disassemble): Mask off unwanted bits after
171         adding in current address for pc-relative operands.
172
173 start-sanitize-tic80
174 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
175
176         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
177         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
178         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
179         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
180         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI, 
181         REG_BASE_M_SI, REG_BASE_M_LI respectively.
182         (REG_SCALED, LSI_SCALED): New operand types.
183         (E): New macro for 'E' bit at bit 27.
184         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
185         opcodes, including the various size flavors (b,h,w,d) for
186         the direct load and store instructions.
187         
188 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
189
190         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
191         in an instruction.
192         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
193         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
194         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
195         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
196         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
197         masks with "MASK_* & ~M_*" to get the M bit reset.
198         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
199         
200 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
201
202         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
203         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
204         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
205         form.
206         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
207         CC, SICR, and LICR table entries.
208         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
209         "bcnd", and "brcr" opcodes.
210
211 end-sanitize-tic80
212 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
213
214         * ppc-opc.c (powerpc_operands): Make comment match the
215         actual fields (no shift field).
216         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
217 start-sanitize-tic80
218         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
219         partial implementation, work in progress.
220         * tic80-opc.c (tic80_operands): Begin construction operands table.
221         (tic80_opcodes): Continue populating opcodes table and start
222         filling in the operand indices.
223         (tic80_num_opcodes): Add this.
224 end-sanitize-tic80
225
226 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
227
228         * m68k-opc.c: Add #B case for moveq.
229
230 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
231
232         * mn10300-dis.c (disassemble): Make sure all variables are initialized
233         before they are used.
234
235 start-sanitize-v850
236 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
237
238         * v850-opc.c (v850_opcodes): Put curly-braces around operands
239         for "breakpoint" instruction.
240
241 end-sanitize-v850
242 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
243
244         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
245         (dep): Use ALL_CFLAGS rather than CFLAGS.
246
247 start-sanitize-v850
248 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
249
250         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
251         flag.
252
253 end-sanitize-v850
254 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
255
256         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
257 start-sanitize-tic80
258         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
259 end-sanitize-tic80
260         
261 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
262
263         * mips16-opc.c: Add "abs".
264
265 start-sanitize-tic80
266 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
267
268         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
269         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
270         (disassembler): Add bfd_arch_tic80 support to set disassemble
271         to print_insn_tic80.
272         * tic80-dis.c (print_insn_tic80): Add stub.
273
274 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
275
276         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
277         * configure: Regenerate with autoconf.
278         * tic80-dis.c: Add file.
279         * tic80-opc.c: Add file.
280         
281 end-sanitize-tic80
282 start-sanitize-d10v
283 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
284
285         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
286
287 end-sanitize-d10v       
288 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
289
290         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
291         (mn10200_opcodes): Use it for some logicals and btst insns.
292         Add "break" and "trap" instructions.
293
294         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
295
296         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
297
298 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
299
300         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
301         relative load or add now depends upon whether the instruction is
302         in a delay slot.
303
304 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
305
306         * mn10200-dis.c: Finish writing disassembler.
307         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
308         Fix mask for "jmp (an)".
309
310         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
311         handle endianness issues for mn10300.
312
313         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
314
315 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
316
317         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
318         instruction.  Fix opcode field for "movb (imm24),dn".
319
320         * mn10200-opc.c (mn10200_operands): Fix insertion position
321         for DI operand.
322
323 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
324
325         * mn10200-opc.c: Create mn10200 opcode table.
326         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
327         but moving along nicely.
328
329 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
330
331         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
332
333 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
334
335         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
336         specifiers for fmovem* instructions.
337
338 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
339
340         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
341
342 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
343
344         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
345         with dsrl.
346
347 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
348
349         * mn10300-opc.c: Add some comments explaining the various
350         operands and such.
351
352         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
353
354 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
355
356         * m68k-dis.c (print_insn_arg): Handle new < and > operand
357         specifiers.
358
359         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
360         operand specifiers in fmovm* instructions.
361
362 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
363
364         * ppc-opc.c (insert_li): Give an error if the offset has the two
365         least significant bits set.
366
367 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
368
369         * mips-dis.c (print_insn_mips16): Separate the instruction from
370         the arguments with a tab, not a space.
371
372 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
373
374         * mn10300-dis.c (disasemble): Finish conversion to '$' as
375         register prefix.
376
377         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
378         mov am,(imm32,sp).
379
380 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
381
382         * configure: Rebuild with autoconf 2.12.
383
384         Add support for mips16 (16 bit MIPS implementation):
385         * mips16-opc.c: New file.
386         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
387         (mips16_reg_names): New static array.
388         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
389         after seeing a 16 bit symbol.
390         (print_insn_little_mips): Likewise.
391         (print_insn_mips16): New static function.
392         (print_mips16_insn_arg): New static function.
393         * mips-opc.c: Add jalx instruction.
394         * Makefile.in (mips16-opc.o): New target.
395         * configure.in: Use mips16-opc.o for bfd_mips_arch.
396         * configure: Rebuild.
397
398 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
399
400         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
401         operand specifiers in *save, *restore and movem* instructions.
402
403         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
404         the coldfire.
405
406         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
407         register operands for immediate arithmetic, not, neg, negx, and
408         set according to condition instructions.
409         
410         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
411         specifier of the effective-address operand in immediate forms of
412         arithmetic instructions.  The specifier for the immediate operand
413         notes how and where the constant will be stored.
414
415 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
416
417         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
418         opcode.
419
420         * mn10300-dis.c (disassemble): Use '$' instead of '%' for 
421         register prefix.
422
423         * mn10300-dis.c (disassemble): Prefix registers with '%'.
424
425 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
426
427         * mn10300-dis.c (disassemble): Handle register lists.
428
429         * mn10300-opc.c: Fix handling of register list operand for
430         "call", "ret", and "rets" instructions.
431
432         * mn10300-dis.c (disassemble): Print PC-relative and memory
433         addresses symbolically if possible.
434         * mn10300-opc.c: Distinguish between absolute memory addresses,
435         pc-relative offsets & random immediates.
436
437         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
438         in 7 byte insns.
439         (disassemble): Handle SPLIT and EXTENDED operands.
440
441 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
442
443         * mn10300-dis.c: Rough cut at printing some operands.
444
445         * mn10300-dis.c: Start working on disassembler support.
446         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
447
448         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
449         list.
450         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
451         
452 start-sanitize-d10v
453 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
454
455         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
456
457 end-sanitize-d10v
458 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
459
460         * mn10300-opc.c (mn10300_opcodes): Demand parens around
461         register argument is calls and jmp instructions.
462
463 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
464
465         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
466         getx operand.  Fix opcode for mulqu imm,dn.
467
468 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
469
470         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
471         in MN10300_OPERAND_SPLIT operands for how many bits
472         appear in the basic insn word.  Add IMM32_HIGH24,
473         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.  
474         (mn10300_opcodes): Use new operands as needed.
475
476         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
477         for bset, bclr, btst instructions.
478         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
479
480         * mn10300-opc.c (mn10300_operands): Remove many redundant
481         operands.  Update opcode table as appropriate.
482         (IMM32): Add MN10300_OPERAND_SPLIT flag.
483         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
484
485 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
486
487         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
488         operands (for indexed load/stores).  Fix bitpos for DI
489         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
490         few instructions that insert immediates/displacements in the
491         middle of the instruction.  Add IMM8E for 8 bit immediate in
492         the extended part of an instruction.
493         (mn10300_operands): Use new opcodes as appropriate.
494
495 start-sanitize-d10v
496 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
497
498         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
499         sequential so the assembler never parallelizes it with
500         other instructions.
501
502 end-sanitize-d10v
503 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
504
505         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
506         a data/address register that appears in register field 0
507         and register field 1.
508         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
509
510 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
511
512         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
513         standard disassembly.
514
515         * alpha-opc.c (alpha_operands): Rearrange flags slot.
516         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.  
517         Recategorize PALcode instructions.
518
519 start-sanitize-v850
520 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
521
522         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
523
524 end-sanitize-v850
525 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
526
527         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
528         there are no operand types.
529
530 start-sanitize-v850
531 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
532
533         * v850-opc.c (D9_RELAX): Renamed from D9, all references
534         changed.
535         (v850_operands): Make sure D22 immediately follows D9_RELAX.
536
537 end-sanitize-v850
538 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
539
540         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
541
542 start-sanitize-v850
543 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
544
545         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
546         and sst.w instructions.
547
548         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
549         "bCC"instructions).
550
551 end-sanitize-v850
552 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
553
554         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
555         and the arguments.
556
557 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
558
559         * ppc-opc.c (PPCPWR2): Define.
560         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
561         it.
562
563 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
564
565         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
566         field for movhu instruction.
567 start-sanitize-v850
568
569         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
570         cast value to "long" not "signed long" to keep hpux10
571         compiler quiet.
572 end-sanitize-v850
573
574 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
575
576         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
577         for mov (abs16),DN.
578
579         * mn10300-opc.c (FMT*): Remove definitions.
580
581         * mn10300-opc.c (mn10300_opcodes): Fix destination register
582         for shift-by-register opcodes.
583
584         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
585         into [AD][MN][01] for encoding the position of the register
586         in the opcode.
587
588 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
589
590         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
591         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
592         
593 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
594
595         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
596         Fix various typos.  Add "PAREN" operand.
597         (MEM, MEM2): Define.
598         (mn10300_opcodes): Surround all memory addresses with "PAREN"
599         operands.  Fix several typos.
600
601         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
602         changes.
603
604 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
605
606         * mn10300-opc.c (FMT_XX): Renumber starting at one.
607         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
608         at this time.
609         (mn10300_opcodes): Break opcode format out into its own field.
610         Update many operand fields to deal with signed vs unsigned
611         issues.  Fix one or two typos in the "mov" instruction
612         opcode, mask and/or operand fields.
613  
614 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
615
616         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
617         m68851 wasn't reset.
618
619 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
620
621         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
622         all opcodes.  Very rough cut at operands for all opcodes.
623
624         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
625         opcode table.
626
627 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
628
629         * mn10200-opc.c, mn10300-opc.c: New files.
630         * mn10200-dis.c, mn10300-dis.c: New files.
631         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
632         * disassemble.c: Break mn10x00 support into 10200 and 10300
633         support.
634         * configure.in: Likewise.
635         * configure: Rebuilt.
636
637 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
638
639         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
640
641 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
642
643         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
644         MN10x00 processors.
645         * disassemble (ARCH_mn10x00): Define.
646         (disassembler): Handle bfd_arch_mn10x00.
647         * configure.in: Recognize bfd_mn10x00_arch.
648         * configure: Rebuilt.
649
650 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
651
652         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
653         accordingly.  Don't declare functions using op_rtn.
654
655 start-sanitize-v850
656 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
657
658         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
659         params to be more standard.
660         * (disassemble):  Print absolute addresses and symbolic names for
661         branch and jump targets.
662         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
663         bit operands.
664         * (v850_opcodes):  Add breakpoint insn.
665
666 end-sanitize-v850
667 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
668
669         * m68k-opc.c: Move the fmovemx data register cases before the
670         other cases, so that they get recognized before the data register
671         does gets treated as a degenerate register list.
672
673 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
674
675         * mips-opc.c: Add a case for "div" and "divu" with two registers
676         and a destination of $0.
677
678 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
679
680         * mips-dis.c (print_insn_arg): Add prototype.
681         (_print_insn_mips): Ditto.
682
683 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
684
685         * mips-dis.c (print_insn_arg): Print condition code registers as
686         $fccN.
687
688 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
689
690         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
691
692 start-sanitize-v850
693 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
694
695         * v850-dis.c (disassemble): Make static.  Provide prototype.
696
697 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
698
699         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
700         in range checks.
701
702 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
703
704         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
705         ']' characters into the output stream.
706         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
707         Add "memop" field to all opcodes (for the disassembler).
708         Reorder opcodes so that "nop" comes before "mov" and "jr"
709         comes before "jarl".
710
711         * v850-dis.c (print_insn_v850): Fix typo in last change.
712
713         * v850-dis.c (print_insn_v850): Properly handle disassembling
714         a two byte insn at the end of a memory region when the memory
715         region's size is only two byte aligned.
716
717         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
718
719         * v850-dis.c (v850_reg_names): Define.
720         (v850_sreg_names, v850_cc_names): Likewise.
721         (disassemble): Very rough cut at printing operands (unformatted).
722
723         * v850-opc.c (BOP_MASK): Fix.
724         (v850_opcodes): Fix mask for jarl and jr.
725
726         * v850-dis.c: New file.  Skeleton for disassembler support.
727         * Makefile.in Remove v850 references, they're not needed here
728         and they weren't being sanitized away.
729         * configure.in: Add v850-dis.o when building v850 toolchains.
730         * configure: Rebuilt.
731         * disassemble.c (disassembler): Call v850 disassembler.
732
733         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
734         (insert_d8_6, extract_d8_6): New functions.
735         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
736         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
737         Add D8_6.
738         (IF4A, IF4B): Use "D7" instead of "D7S".
739         (IF4C, IF4D): Use "D8_7" instead of "D8".
740         (IF4E, IF4F): New.  Use "D8_6".
741         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
742         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
743
744         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
745         (v850_operands): Change D16 to D16_15, use special insert/extract
746         routines.  New new D16 that uses the generic insert/extract code.
747         (IF7A, IF7B): Use D16_15.
748         (IF7C, IF7D): New.  Use D16.
749         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
750
751         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
752         message.  Issue an error if the branch offset is odd.
753
754         * v850-opc.c: Add notes about needing special insert/extract
755         for all the load/store insns, except "ld.b" and "st.b".
756
757         * v850-opc.c (insert_d22, extract_d22): New functions.
758         (v850_operands): Use insert_d22 and extract_d22 for
759         D22 operands.
760         (insert_d9): Fix range check.
761
762 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
763
764         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
765         and set bits field to D9 and D22 operands.
766
767 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
768
769         * v850-opc.c (v850_operands): Define SR2 operand.
770         (v850_opcodes): "ldsr" uses R1,SR2.
771
772         * v850-opc.c (v850_opcodes): Fix opcode specs for
773         sld.w, sst.b, sst.h, sst.w, and nop.
774
775 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
776
777         * v850-opc.c (v850_opcodes): Add null opcode to mark the
778         end of the opcode table.
779
780 end-sanitize-v850
781 start-sanitize-d10v
782 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
783
784         * d10v-opc.c (pre_defined_registers): Added register pairs,
785         "r0-r1", "r2-r3", etc.
786
787 end-sanitize-d10v       
788 start-sanitize-v850
789 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
790
791         * v850-opc.c (v850_operands): Make I16 be a signed operand.
792         Create I16U for an unsigned 16bit mmediate operand.
793         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
794
795         * v850-opc.c (v850_operands): Define EP operand.
796         (IF4A, IF4B, IF4C, IF4D): Use EP.
797
798         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
799         with immediate operand, "movhi".  Tweak "ldsr".
800
801         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
802         correct.  Get sld.[bhw] and sst.[bhw] closer.
803
804         * v850-opc.c (v850_operands): "not" is a two byte insn
805
806         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
807
808         * v850-opc.c (v850_operands): D16 inserts at offset 16!
809
810         * v850-opc.c (two): Get order of words correct.
811
812         * v850-opc.c (v850_operands): I16 inserts at offset 16!
813
814         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
815         register source and destination operands.
816         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
817
818         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
819         same thinko in "trap" opcode.
820
821         * v850-opc.c (v850_opcodes): Add initializer for size field
822         on all opcodes.
823
824         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
825         Add D8 for 8-bit unsigned field in short load/store insns.
826         (IF4A, IF4D): These both need two registers.
827         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
828         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
829         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
830         for "ldsr" and "stsr".
831         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
832         is unsigned.
833
834         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
835         short store word (sst.w).
836
837 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
838
839         * v850-opc.c (v850_operands): Added insert and extract fields,
840         pointers to functions that handle unusual operand encodings.
841
842 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
843
844         * v850-opc.c (v850_opcodes): Enable "trap".
845
846         * v850-opc.c (v850_opcodes): Fix order of displacement
847         and register for "set1", "clr1", "not1", and "tst1".
848
849 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
850
851         * v850-opc.c (v850_operands): Add "B3" support.
852         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
853         and "tst1".
854
855         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
856
857         * v850-opc.c: Close unterminated comment.
858
859 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
860
861         * v850-opc.c (v850_operands): Add flags field.
862         (v850_opcodes): add move opcodes.
863
864 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
865
866         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
867         * configure: (bfd_v850v_arch) Add new case.
868         * configure.in: (bfd_v850_arch) Add new case.
869         * v850-opc.c: New file.
870         
871 end-sanitize-v850
872 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
873
874         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
875
876 start-sanitize-d10v
877 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
878
879         * d10v-opc.c: Add additional information to the opcode
880         table to help determinine which instructions can be done
881         in parallel.
882
883 end-sanitize-d10v
884 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
885
886         * mpw-make.sed: Update editing of include pathnames to be
887         more general.
888
889 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
890
891         * arm-opc.h: Added "bx" instruction definition.
892
893 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
894
895         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
896
897 start-sanitize-d10v
898 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
899
900         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
901
902 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
903
904         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
905
906 end-sanitize-d10v       
907 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
908
909         * makefile.vms: Update for alpha-opc changes.
910
911 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
912
913         * i386-dis.c (print_insn_i386): Actually return the correct value.
914         (ONE, OP_ONE): #ifdef out; not used.
915
916 start-sanitize-d10v
917 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
918
919         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
920         Changed subi operand type to treat 0 as 16.
921
922 end-sanitize-d10v
923 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
924
925         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
926         <rose@netcom.com>.
927
928 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
929
930         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
931         memory transfer instructions. Add new format string entries %h and %s.
932         * arm-dis.c: (print_insn_arm): Provide decoding of the new
933         formats %h and %s.
934
935 start-sanitize-d10v
936 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
937
938         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
939         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
940
941 end-sanitize-d10v       
942 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
943
944         * alpha-dis.c (print_insn_alpha_osf): Remove.
945         (print_insn_alpha_vms): Remove.
946         (print_insn_alpha): Make globally visible.  Chose the register
947         names based on info->flavour.
948         * disassemble.c: Always return print_insn_alpha for the alpha.
949
950 start-sanitize-d10v
951 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
952
953         * d10v-dis.c (dis_long): Handle unknown opcodes.
954
955 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
956
957         * d10v-opc.c: Changes to support signed and unsigned numbers.
958         All instructions with the same name that have long and short forms
959         now end in ".l" or ".s".  Divs added.
960         * d10v-dis.c: Changes to support signed and unsigned numbers.
961
962 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
963
964         * d10v-dis.c: Change all functions to use info->print_address_func.
965
966 end-sanitize-d10v       
967 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
968
969         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
970         move ccr/sr insns more strict so that the disassembler only
971         selects them when the addressing mode is data register.
972
973 start-sanitize-d10v
974 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
975         * d10v-opc.c (pre_defined_registers):  Declare.
976         * d10v-dis.c (print_operand): Now uses pre_defined_registers
977         to pick a better name for the registers.
978
979 end-sanitize-d10v       
980 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
981
982         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
983         operands for fexpand and fpmerge.  From Christian Kuehnke
984         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
985
986 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
987
988         * alpha-dis.c (print_insn_alpha): No longer the user-visible
989         print routine.  Take new regnames and cpumask arguments.
990         Kill the environment variable nonsense.
991         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
992         (print_insn_alpha_vms): New function.  Do VMS style regnames.
993         * disassemble.c (disassembler): Test bfd flavour to pick
994         between OSF and VMS routines.  Default to OSF.
995
996 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
997
998         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
999         * configure: Rebuild.
1000         * Makefile.in (install): Use @INSTALL_SHLIB@.
1001
1002 start-sanitize-d10v
1003         Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1004
1005         * configure: (bfd_d10v_arch) Add new case.
1006         * configure.in: (bfd_d10v_arch) Add new case.
1007         * d10v-dis.c: New file.
1008         * d10v-opc.c: New file.
1009         * disassemble.c (disassembler) Add entry for d10v.
1010
1011 end-sanitize-d10v
1012 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1013
1014         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1015         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1016
1017 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
1018
1019         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
1020         distinguish between variants of the instruction set.
1021         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
1022         distinguish between variants of the instruction set.
1023
1024 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
1025
1026         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
1027         the 8086 instruction set.
1028         * i386-dis.c:  General cleanups.  Make most things static.  Add
1029         prototypes.  Get rid of static variables aflags and dflags.  Pass
1030         them as args (to almost everything).
1031
1032 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
1033
1034         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1035
1036         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1037
1038         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1039         if the next arg is marked with SRC_IN_DST.  Gross.
1040
1041         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1042         we're looking for and find EXR.
1043
1044         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1045         if we're looking for KBIT and we don't find it.
1046
1047         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1048         for L_3 and L_2.
1049
1050         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1051         3bit immediate operands.
1052
1053 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1054
1055         * Released binutils 2.7.
1056
1057         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
1058         <kkaempf@progis.ac-net.de>.
1059
1060 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
1061
1062         * alpha-opc.c: Correct second case of "mov" to use OPRL.
1063
1064 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
1065
1066         * sparc-dis.c (print_insn_sparclite):  New routine to print
1067         sparclite instructions.
1068
1069 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1070
1071         * m68k-opc.c (m68k_opcodes): Add coldfire support.
1072
1073 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
1074
1075         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1076         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1077         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1078
1079 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1080
1081         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1082         Use autoconf-set values.
1083         (docdir, oldincludedir): Removed.
1084         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1085
1086 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
1087
1088         * alpha-opc.c: New file.
1089         * alpha-opc.h: Remove.
1090         * alpha-dis.c: Complete rewrite to use new opcode table.
1091         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1092         * configure: Rebuild with autoconf 2.10.
1093         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1094         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1095         alpha-opc.h.
1096         (alpha-opc.o): New target.
1097
1098 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
1099
1100         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1101         Set imm_added_to_rs1 even if the source and destination register
1102         are not the same.
1103
1104         * sparc-opc.c: Add some two operand forms of the wr instruction.
1105
1106 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
1107
1108         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1109         to just "mode".
1110
1111         * disassemble.c (disassembler): Handle H8/S.
1112         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1113
1114 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1115
1116         * sparc-opc.c: Add beq/teq as aliases for be/te.
1117
1118         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
1119         <sergei@msil.sps.mot.com>.
1120
1121 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
1122
1123         * makefile.vms: New file.
1124
1125         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1126
1127 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
1128
1129         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1130         regardless of plen.
1131
1132 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
1133
1134         * i386-dis.c (OP_OFF): Call append_prefix.
1135
1136 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1137
1138         * ppc-opc.c (instruction encoding macros): Add explicit casts to
1139         unsigned long to silence a warning from the Solaris PowerPC
1140         compiler.
1141
1142 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
1143
1144         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1145
1146 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
1147
1148         * sparc-dis.c (X_IMM,X_SIMM): New macros.
1149         (X_IMM13): Delete.
1150         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
1151         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1152         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
1153         cpush, cpusha, cpull sparclet insns.
1154
1155 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
1156
1157         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1158
1159 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
1160
1161         * sparc-opc.c: Set F_FBR on floating point branch instructions.
1162         Set F_FLOAT on other floating point instructions.
1163
1164 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1165
1166         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1167         registers.
1168         (powerpc_opcodes): Add 860/821 specific SPRs.
1169
1170 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
1171
1172         * configure.in: Permit --enable-shared to specify a list of
1173         directories.  Set and substitute BFD_PICLIST.
1174         * configure: Rebuild.
1175         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
1176         uses.  Set to @BFD_PICLIST@.
1177
1178 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
1179
1180         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1181         not "abs", which may be needed for the absolute in something
1182         like btst #0,@10:8.  Print L_3 immediates separately from other
1183         immediates.  Change ABSMOV reference to ABS8MEM.
1184
1185 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
1186
1187         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1188         (current_arch_mask): New static global.
1189         (compute_arch_mask): New static function.
1190         (print_insn_sparc): Delete sparc_v9_p.  New static local
1191         current_mach.  Resort opcode table if current_mach changes.
1192         Generalize "insn not supported" test.
1193         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1194         Delete test for v9/!v9.
1195         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1196         (v6notlet): Define.
1197         (brfc): Split into CBR and FBR for coprocessor/fp branches.
1198         (brfcx): Renamed to FBRX.
1199         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
1200         coprocessor mnemonics are not supported on the sparclet).
1201         (condf): Renamed to CONDF.
1202         (SLCBCC2): Delete F_ALIAS flag.
1203
1204 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
1205
1206         * sparc-opc.c (sparc_opcodes): rd must be 0 for
1207         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
1208
1209 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
1210
1211         * Makefile.in (config.status): Depend upon BFD VERSION file, so
1212         that the shared library version number is set correctly.
1213
1214 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
1215
1216         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
1217         Miles Bader <miles@gnu.ai.mit.edu>.
1218         * configure: Rebuild.
1219
1220 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
1221
1222         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1223         malloc.
1224
1225 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
1226
1227         * configure: Rebuild with autoconf 2.8.
1228
1229 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
1230
1231         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1232         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1233
1234 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1235
1236         * configure.in: Don't set SHLIB or SHLINK to an empty string,
1237         since they appear as targets in Makefile.in.
1238         * configure: Rebuild.
1239
1240 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
1241
1242         * mpw-make.sed: Edit out shared library support bits.
1243
1244 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
1245
1246         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1247         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1248         (sparc_opcodes): Add sparclet insns.
1249         (sparclet_cpreg_table): New static local.
1250         (sparc_{encode,decode}_sparclet_cpreg): New functions.
1251         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1252
1253 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
1254
1255         * i386-dis.c (index16): New static variable.
1256         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1257         other way around.
1258         (OP_indirE): Return result of OP_E.
1259         (OP_E): Check for 16 bit addressing mode, and disassemble
1260         correctly.  Optimised 32 bit case a little.  Don't print
1261         "(base,index,scale)" when sib specifies only an offset.
1262
1263 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
1264
1265         * configure.in: Set and substitute SHLIB_DEP.
1266         * configure: Rebuild.
1267         * Makefile.in (SHLIB_DEP): New variable.
1268         (LIBIBERTY_LISTS, BFD_LIST): New variables.
1269         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
1270         COMMON_SHLIB, add them to piclist with appropriate modifications.
1271         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
1272         here: just use piclist.
1273
1274 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
1275
1276         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1277         (print_insn_sparc): Rewrite v9/not-v9 tests.
1278         (compare_opcodes): Likewise.
1279         * sparc-opc.c (MASK_<ARCH>): Define.
1280         (v6,v7,v8,sparclite,v9,v9a): Redefine.
1281         (sparclet,v6notv9): Define.
1282         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
1283         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1284
1285 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
1286
1287         * configure.in: Call AC_PROG_CC before configure.host.
1288         * configure: Rebuild.
1289
1290         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1291
1292 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
1293
1294         * i386-dis.c (onebyte_has_modrm): New static array.
1295         (twobyte_has_modrm): New static array.
1296         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1297
1298 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1299
1300         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1301         $(SHLINK).
1302
1303 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1304
1305         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1306         doesn't conflict.
1307
1308 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
1309
1310         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1311         m68010up, not just m68020up | cpu32.
1312
1313         * Makefile.in (SONAME): New variable.
1314         ($(SHLINK)): Make a link to the transformed name, as well.
1315         (stamp-tshlink): New target.
1316         (install): Skip stamp-tshlink during install.
1317
1318 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
1319
1320         * configure.in: Call AC_ARG_PROGRAM.
1321         * configure: Rebuild.
1322         * Makefile.in (program_transform_name): New variable.
1323         (install): Transform library name before installing it.
1324
1325 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
1326
1327         * i960-dis.c (mem): Add HX dcinva instruction.
1328
1329         Support for building as a shared library, based on patches from
1330         Alan Modra <alan@spri.levels.unisa.edu.au>:
1331         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1332         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1333         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1334         * configure: Rebuild.
1335         * Makefile.in (ALLLIBS): New variable.
1336         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1337         (COMMON_SHLIB, SHLINK): New variables.
1338         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1339         (STAGESTUFF): Remove variable.
1340         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1341         (stamp-piclist, piclist): New targets.
1342         ($(SHLIB), $(SHLINK)): New targets.
1343         ($(OFILES)): Depend upon stamp-picdir.
1344         (disassemble.o): Build twice if PICFLAG is set.
1345         (MOSTLYCLEAN): Add pic/*.o.
1346         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1347         (distclean): Remove pic and stamp-picdir.
1348         (install): Install shared libraries.
1349         (stamp-picdir): New target.
1350
1351 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
1352
1353         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1354         Print unknown instruction as "unknown", rather than in hex.
1355
1356 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
1357
1358         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1359
1360 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
1361
1362         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1363
1364 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
1365
1366         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1367         when necessary.  From Ulrich Drepper
1368         <drepper@myware.rz.uni-karlsruhe.de>.
1369
1370 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
1371
1372         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1373         sparc_num_opcodes.  Update architecture enum values.
1374         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1375         (sparc_opcode_lookup_arch): New function.
1376         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1377         (sparc_opcodes): Add v9a shutdown insn.
1378
1379 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
1380
1381         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1382         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
1383         architecture.
1384         (print_insn_sparc64): Deleted.
1385         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1386         print_insn_sparc.
1387
1388         * sparc-opc.c (architecture_pname): Add v9a.
1389
1390 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
1391
1392         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1393         incorrectly defined as 0x16 when it should be 0x15.
1394         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1395         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
1396         excb (exception barrier) which is defined in the Alpha
1397         Architecture Handbook version 2.
1398         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1399         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
1400         disassembled as or, for example.
1401
1402 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
1403
1404         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1405         (_print_insn_mips): Change i from int to unsigned int.
1406
1407 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
1408
1409         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1410         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
1411
1412 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
1413
1414         * i386-dis.c: Added Pentium Pro instructions.
1415
1416 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1417
1418         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1419         being for Power2.
1420
1421 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1422
1423         * sh-opc.h (sh_nibble_type): Added REG_B.
1424         (sh_arg_type): Added A_REG_B.
1425         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1426         and stc.l opcodes.
1427         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1428
1429 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
1430
1431         * disassemble.c (disassembler): Use new bfd_big_endian macro.
1432
1433 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
1434
1435         * Makefile.in (distclean): Remove stamp-h.  From Ronald
1436         F. Guilmette <rfg@monkeys.com>.
1437
1438 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
1439
1440         From David Mosberger-Tang  <davidm@azstarnet.com>:
1441         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1442         instruction.
1443
1444 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1445
1446         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1447         (sh_table): Added many SH3 opcodes.
1448         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1449
1450 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1451
1452         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1453         (subco,subco.): Mark this PPC, not PPCCOM.
1454
1455 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
1456
1457         * configure: Rebuild with autoconf 2.7.
1458
1459 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
1460
1461         * configure: Rebuild with autoconf 2.6.
1462
1463 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
1464
1465         * configure.in: Sort list of architectures.  Accept but do nothing
1466         for alliant, convex, pyramid, romp, and tahoe.
1467
1468 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
1469
1470         * a29k-dis.c (print_special): Change num to unsigned int.
1471
1472 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
1473
1474         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1475         shifting it.
1476
1477 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
1478
1479         * configure.in: Call AC_CHECK_PROG to find and cache AR.
1480         * configure: Rebuilt.
1481
1482 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
1483
1484         * configure.in: Add case for bfd_i860_arch.
1485         * configure: Rebuild.
1486
1487 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
1488
1489         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1490         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1491         (NEXTDOUBLE): Likewise.
1492         (print_insn_m68k): Don't match fmoveml if there is more than one
1493         register in the list.
1494         (print_insn_arg): Handle a place of '8' for a type of 'L'.
1495
1496 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
1497
1498         * m68k-opc.c: Use #W rather than #w.
1499         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1500
1501 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
1502
1503         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1504         and likewise for all the dbxx opcodes.
1505
1506 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
1507
1508         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1509
1510 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1511
1512         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1513         the VR4100 specific instructions to the mips_opcodes structure.
1514
1515 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
1516
1517         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1518         ugly Metrowerks bug in CW6, is fixed in CW7.
1519
1520 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1521
1522         * ppc-opc.c (whole file): Add flags for common/any support.
1523
1524 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
1525
1526         * Makefile.in (BISON): Remove macro.
1527         (FLAGS_TO_PASS): Remove BISON.
1528
1529 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
1530
1531         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1532
1533         * m68k-dis.c (print_insn_m68k): Recognize all two-word
1534         instructions that take no args by looking at the match mask.
1535         (print_insn_arg): Always print "%" before register names.
1536         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1537         [case '_']: Don't print "@#" before address.
1538         [case 'J']: Use "%s" as format string, not register name.
1539         [case 'B']: Treat place == 'C' like 'l' and 'L'.
1540
1541 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
1542
1543         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1544         name correctly.
1545
1546 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
1547
1548         From David Mosberger-Tang  <davidm@azstarnet.com>
1549
1550         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1551         (alpha_insn_set): added definitions for VAX floating point
1552         instructions (Unix compilers don't generate these, but handcoded
1553         assembly might still use them).
1554
1555         * alpha-dis.c (print_insn_alpha): added support for disassembling
1556         the miscellaneous instructions in the Alpha instruction set.
1557
1558 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
1559
1560         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1561         no longer create sysdep.h, sed ppc-opc.c to work around a
1562         serious Metrowerks C bug.
1563         * mpw-make.in: Remove.
1564         * mpw-make.sed: New file, used by mpw-configure to edit
1565         Makefile.in into an MPW makefile.
1566
1567 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
1568
1569         * Makefile.in (maintainer-clean): New synonym for realclean.
1570
1571 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
1572
1573         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1574         which use '0', '1', and '2' instead.  Specify the proper size for
1575         a pmove immediate operand.  Correct the pmovefd patterns to be
1576         moves to a register, not from a register.
1577         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1578
1579 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
1580
1581         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1582         %psr, %wim, %tbr as F_NOTV9.
1583
1584 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
1585
1586         * Makefile.in (Makefile): Just rebuild Makefile when running
1587         config.status.
1588         (config.h, stamp-h): New targets.
1589         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1590         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
1591         rebuilding config.h.
1592         * configure: Rebuild.
1593
1594         * mips-opc.c: Change unaligned loads and stores with "t,A"
1595         operands to use "t,A(b)".
1596
1597 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1598
1599         * sh-dis.c (print_insn_shx): Add F_FR0 support.
1600
1601 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1602
1603         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1604         until 3 instead of until 2.
1605
1606 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
1607
1608         * Makefile.in (ALL_CFLAGS): Define.
1609         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1610         (MOSTLYCLEAN): Add config.log.
1611         (distclean): Don't remove config.log.
1612         * configure.in: Substitute HDEFINES.
1613         * configure: Rebuild.
1614
1615 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1616
1617         * sh-opc.h (sh_arg_type): Add F_FR0.
1618         (sh_table, case fmac): Add F_FR0 as first argument.
1619         
1620 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1621
1622         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1623
1624 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
1625
1626         * sparc-dis.c: Remove all references to NO_V9.
1627
1628 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
1629
1630         * aclocal.m4: Just include ../bfd/aclocal.m4.
1631         * configure: Rebuild.
1632
1633 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
1634
1635         * sparc-dis.c (X_DISP19): Define.
1636         (print_insn, case 'G'): Use it.
1637         (print_insn, case 'L'): Sign extend displacement.
1638
1639 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
1640
1641         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1642         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
1643         host_makefile_frag or frags.
1644         * aclocal.m4: New file.
1645         * configure: Rebuild.
1646         * Makefile.in (INSTALL): Set to @INSTALL@.
1647         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1648         (INSTALL_DATA): Set to @INSTALL_DATA@.
1649         (AR): Set to @AR@.
1650         (AR_FLAGS): Set to rc rather than qc.
1651         (CC): Define as @CC@.
1652         (CFLAGS): Set to @CFLAGS@.
1653         (@host_makefile_frag@): Remove.
1654         (config.status): Remove dependency upon @frags@.
1655
1656         * configure.in: ../bfd/config.bfd now just sets shell variables.
1657         Use them rather than looking through target Makefile fragments.
1658         * configure: Rebuild.
1659
1660 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1661
1662         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1663
1664 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
1665
1666         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1667         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1668         sparc64 insns.
1669
1670         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1671         (lookup_{name,value}): New functions.
1672         (prefetch_table): New static local.
1673         (sparc_{encode,decode}_prefetch): New functions.
1674         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1675
1676 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1677
1678         * sh-opc.h: Add blank lines to improve readabililty of sh3e
1679         instructions.
1680
1681 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1682
1683         * sh-dis.c: Correct comment on first line of file.
1684
1685 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
1686
1687         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1688
1689         * sparc-opc.c (asi, membar): New static locals.
1690         (sparc_{encode,decode}_{asi,membar}): New functions.
1691         (sparc_opcodes, membar insn): Fix.
1692         * sparc-dis.c (print_insn): Call sparc_decode_asi.
1693         Support decoding of membar masks.
1694         (X_MEMBAR): Define.
1695
1696 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
1697
1698         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1699
1700 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
1701
1702         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1703         and likewise for the other branches.  Add bhs as an alias for bcc,
1704         and likewise for the size variants.  Add dbhs as an alias for
1705         dbcc.
1706
1707 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
1708
1709         * sh-opc.h (FP sts instructions): Update to match reality.
1710
1711 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
1712
1713         * m68k-dis.c: (fpcr_names): Add % before all register names.
1714         (reg_names): Likewise.
1715         (print_insn_arg): Don't explicitly print % before register names.
1716         Add % before register names in static array names.  In case 'r',
1717         print data registers as `@(Dn)', not `Dn@'.  When printing a
1718         memory address, don't print @# before it.
1719         (print_indexed): Change base_disp and outer_disp from int to
1720         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
1721         syntax.  Sign extend 8 byte displacement correctly.
1722         (print_base): Print using MIT syntax.  Print zpc when appropriate.
1723         Change parameter disp from int to bfd_vma.
1724
1725         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1726         for jsr.
1727
1728 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
1729
1730         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1731         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1732         * sh-opc.h (sh_arg_type): Add new operand types.
1733         (sh_table): Add new opcodes from SH3E Floating Point ISA.
1734
1735 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
1736
1737         * Makefile.in (distclean): Remove generated file config.h.
1738
1739 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
1740
1741         * Makefile.in (distclean): Remove generated file config.h.
1742
1743 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
1744
1745         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1746         Clean up tables.
1747         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1748         (opcode): Remove.
1749         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
1750         rather than numopcodes.  Use m68k_opcodes rather than removed
1751         opcode function.  Don't check F_ALIAS.
1752         (print_insn_arg): Change first parameter to be const char *.
1753         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1754         (m68k-opc.o): New target.
1755         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1756         * configure: Rebuild.
1757
1758 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
1759
1760         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1761         (opcode_bits, opcode_hash_table): New variables.
1762         (opcodes_initialized): Renamed from opcodes_sorted.
1763         (build_hash_table): New function.
1764         (is_delayed_branch): Use hash table.
1765         (print_insn): Renamed from print_insn_sparc, made static.
1766         Build and use hash table.  If !sparc64, ignore sparc64 insns,
1767         and vice-versa if sparc64.
1768         (print_insn_sparc, print_insn_sparc64): New functions.
1769         (compare_opcodes): Move sparc64 opcodes to end.
1770         Print commutative insns with constant second.
1771         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1772
1773 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
1774
1775         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
1776         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
1777         avoids printing a delay slot in a delay slot.
1778         * sh-opc.h (sh_table): Fully bracket last entry.
1779
1780 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
1781
1782         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1783
1784 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
1785
1786         * configure.in: Get host_makefile_frag from ${srcdir}.
1787
1788         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
1789         config.h from config.in.  Don't set up sysdep.h link.
1790         * sysdep.h: New file.
1791         * configure, config.in: New files, generated from configure.in.
1792         * Makefile.in: Updated to be processed autoconf-style.
1793         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
1794         (Makefile): Depend on config.status.
1795         (config.status): New rule.
1796         * configure.bat: Update Makefile substitutions.
1797
1798 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
1799
1800         * mips-opc.c (L1): Define.
1801         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1802         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1803         and wb.
1804
1805 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
1806
1807         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1808         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1809         have multiple add units but only a single logical unit.
1810
1811         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1812         shifted by 18, without any insertion or extraction function.
1813         (insert_cr, extract_cr): Remove.
1814
1815 start-sanitize-arc
1816 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
1817
1818         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1819
1820 end-sanitize-arc
1821 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
1822
1823         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1824         register names.
1825
1826 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
1827
1828         * mpw-config.in: Add sh and i386 configs, remove sparc config.
1829         * sh-opc.h: Add copyright.
1830
1831 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
1832
1833         * Makefile.in (crunch-m68k): Delete extra target accidentally
1834         checked in a while ago.
1835
1836 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1837
1838         * sh-opc.h (sh_table): Add SH3 support.
1839
1840 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1841
1842         * sh-opc.h: Added bsrf and braf.
1843
1844 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)       
1845
1846         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
1847         bogus [ls]fm{ea,fd} patterns.
1848
1849         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1850         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1851         initialize it from memory.  Make function static.
1852         (print_insn_{big,little}_arm): New functions.
1853         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1854         the correct endianness.
1855
1856 start-sanitize-arc
1857 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
1858
1859         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1860         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1861 end-sanitize-arc
1862
1863 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
1864
1865         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1866         enum list.
1867
1868 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1869
1870         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1871         17th, so that it builds again using GCC as the compiler.
1872
1873 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
1874
1875         * mips-dis.c (print_insn_little_mips): Cast return value from
1876         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1877         expects an unsigned long, and that might be fewer words of
1878         argument storage (e.g., if bfd_vma is long long on a 32-bit
1879         machine).
1880         (print_insn_big_mips): Likewise with bfd_getb32 value.
1881         (_print_insn_mips): Now static.
1882
1883 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
1884
1885         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1886         gcc memory hog problem with initializer is fixed.
1887
1888 start-sanitize-arc
1889 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
1890
1891         * arc-opc.c (NULL): Define.
1892         (arc_operands, insn fields u,s): Delete.
1893         (arc_operands, insn fields a,b,c): Mark as signed.
1894         (arc_opcodes): No longer const, links computed at run-time.
1895         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1896         suffixes that affect the insn code.
1897         (arc_opcodes): Resort table to macros are first.
1898         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1899         (arc_opcodes, st [b] entry): Likewise.
1900         (arc_opcodes, st [b,d] entry): Fix mask, value.
1901         (arc_reg_names): Add entries for r29, r30, r31, r60.
1902         (opcode_map, icode_map): New static globals.
1903         (arc_opcode_init_tables): Initialize them.
1904         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1905         (insert_shimmoffset): Signal error if register present.
1906         Validate constant.
1907         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1908 end-sanitize-arc
1909
1910 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
1911
1912         Merge in support for Mac MPW as a host.
1913         (Old change descriptions retained for informational value.)
1914
1915         * mpw-config.in (archname): Compute from the config.
1916         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1917
1918         * mpw-config.in (target_arch): Compute from canonical target.
1919         (m68k, mips, powerpc, sparc): Add architectures.
1920         * mpw-make.in (disassemble.c.o): Add.
1921         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far). 
1922
1923         * mpw-config.in (BFD_MACHINES): Set to a default value.
1924         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1925
1926         * mpw-make.in (CSEARCH): Add extra-include to search path.
1927
1928         * mpw-config.in (varargs.h): Don't create.
1929         (sysdep.h): Create using forward-include.
1930         * mpw-make.in (CSEARCH): Add include/mpw to search path.
1931
1932         * mpw-config.in: New file, MPW version of configure.in.
1933         * mpw-make.in: New file, MPW version of Makefile.in.
1934
1935 start-sanitize-arc
1936 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
1937
1938         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
1939         Call arc_get_opcode_mach to map bfd mach number to opcode value.
1940         (print_insn_*): Pass bfd mach number, not opcode version.
1941         * arc-opc.c (arc_get_opcode_mach): New function.
1942 end-sanitize-arc
1943
1944 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
1945
1946         * alpha-dis.c (print_insn_alpha): Put empty statement after
1947         default label.
1948
1949 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
1950
1951         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1952         (low_sign_extend): Likewise.
1953         (get_field): Delete unused function.
1954         (set_field, deposit_14, deposit_21): Likewise.
1955
1956 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1957
1958         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
1959           (guy@netapp.com).
1960
1961 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
1962
1963         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
1964
1965         * alpha-opc.h (OSF_ASMCODE): define
1966         print pal-code names as defined in App C of the
1967         Alpha Architecture Reference Manual
1968
1969         * alpha-dis.c: cleaned up output
1970         print stylized code forms as defined in App A.4.3 of the
1971         Alpha Architecture Reference Manual
1972
1973 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
1974
1975         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
1976         `rfe'.
1977         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1978         'N', and 'M'.
1979
1980 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
1981
1982         * m68k-dis.c (opcode): New function.  Returns address of opcode
1983         table entry given index, even if the opcode table was split to
1984         work around gcc bugs.
1985         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1986         directly.
1987         (BREAK_UP_BIG_DECL): Make secondary array static and const.
1988         (reg_names): Now const.
1989         (print_insn_arg): Arrays cacheFieldName and names now const.
1990         (print_indexed): Array scales now const.
1991
1992 start-sanitize-arc
1993 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
1994
1995         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1996         (print_insn_arc_{host,graphics,audio}): Likewise.
1997         (print_insn): Add prototype.
1998         (arc_get_disassembler): New arg `big_p'.  Return little or big
1999         print fn accordingly.
2000         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
2001         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
2002         (arc_opval_supported): Likewise.
2003         * disassemble.c (disassembler): Pass big endian flag to
2004         arc_get_disassembler.
2005 end-sanitize-arc
2006
2007 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
2008
2009         * ppc-opc.c: Sort recently added instructions by minor opcode
2010         number within major opcode number.
2011
2012 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
2013
2014         * hppa-dis.c: Include libhppa.h.
2015
2016 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2017
2018         * mips-opc.c: Change dli to use M_DLI, and add dla.
2019
2020 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2021
2022         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
2023
2024 start-sanitize-arc
2025 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
2026
2027         * arc-dis.c (arc_get_disassembler): Change argument to int,
2028         one of bfd_mach_arc_xxx.  All callers updated.
2029 end-sanitize-arc
2030
2031 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
2032
2033         * mips-opc.c: Add r4650 mul instruction.
2034
2035 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
2036
2037         * mips-opc.c: Add uld and usd macros for unaligned double load and
2038         store.
2039
2040 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2041
2042         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2043         mfdcr, mtdcr, icbt, iccci.
2044
2045 start-sanitize-arc
2046 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
2047
2048         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
2049         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
2050         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
2051         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
2052         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
2053         (insert_absaddr): New function.
2054
2055 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
2056
2057         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2058         New argument `cpu', pass it to arc_opcode_init_tables.
2059         Document byte order dependencies.  Ignore unsupported insns.
2060         (arc_get_disassembler): New function.
2061         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2062         print_insn_arc_audio): New functions.
2063         * arc-opc.c (MULTSHIFT operand): Delete.
2064         (UNSIGNED, SATURATION): New operands.
2065         (mac, mul, mul64, mulu64): New insns.
2066         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2067         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2068         (host,graphics,audio extended and auxiliary regs): Define.
2069         (ss, sc, mh, ml): New suffixes.
2070         (arc_opcode_supported, arc_opval_supported): New functions.
2071         (insert_multshift, extract_multshift): Deleted.
2072         * disassemble.c (disassembler, case bfd_arch_arc): Call
2073         arc_get_disassembler to get disassembler routine.
2074 end-sanitize-arc
2075
2076 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
2077
2078         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2079         signed char fields to shorts, more portable.
2080
2081 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
2082
2083         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2084         char fields as signed chars, since they may have negative values.
2085
2086 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2087
2088         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2089           (mycroft@netbsd.org).
2090
2091 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
2092
2093         From "Logg, Ed" <elogg@ea.com>:
2094         * ppc-opc.c (extract_bdm): Correct parenthezisation.
2095         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2096         value.
2097
2098 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
2099
2100         * ppc-opc.c: Changes based on patch from David Edelsohn
2101         <edelsohn@mhpcc.edu>.
2102         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2103         SPR.
2104         (FXM_MASK): Define.
2105         (insert_tbr): New static function.
2106         (extract_tbr): New static function.
2107         (XFXFXM_MASK, XFXM): Define.
2108         (XSPRBAT_MASK, XSPRG_MASK): Define.
2109         (powerpc_opcodes): Add instructions to access special registers by
2110         name.  Add mtcr and mftbu.
2111
2112 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2113
2114         * mips-opc.c (P3): Define.
2115         (mips_opcodes): Add mad and madu.
2116
2117 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
2118
2119         * configure.in: Add W65 support.
2120         * disassemble.c: Likewise.
2121         * w65-opc.h, w65-dis.c: New files.
2122
2123 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2124
2125         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2126         immediates.
2127
2128 start-sanitize-arc
2129 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
2130
2131         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2132         slot.
2133         * arc-opc.c (extract_reladdr): New function.
2134         (insert_reladdr): Store address right-shifted by 2.
2135 end-sanitize-arc
2136
2137 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2138
2139         * mips-opc.c: Add dli as a synonym for li.
2140
2141 start-sanitize-arc
2142 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
2143
2144         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2145         All uses changed.
2146         (extraction fns): Insn argument now array of two words.  Return pointer
2147         to value's table entry.  All uses changed.
2148         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2149         (insert_multshift, extract_multshift): New fns.
2150         (arc_operands): Add support for cache bypass suffix.  Add support for
2151         predefined aux regs.  Modifier bits moved to flags field.
2152         (arc_opcodes): Likewise.
2153         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
2154         New insn rlc.  Update to syntax in programmer's manual.
2155         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
2156         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
2157         bypass.
2158         (arc_opcode_init_tables): New argument to indicate cpu type.
2159         (insert_reg): Handle predefined aux regs.
2160         (extract_reg): Likewise.
2161         (lookup_register): New fn.
2162         * arc-dis.c (arc_condition_codes): Deleted.
2163         (print_insn_arc): Handle insns with 32 bit immediate constants better.
2164         Clean up modifier handling.  Handle predefined aux regs.
2165 end-sanitize-arc
2166
2167 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
2168
2169         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2170         print something for reserved opcode values, even if it won't
2171         assemble again.
2172
2173         * mips-dis.c (_print_insn_mips): When initializing, shift right
2174         and mask, to avoid sign extension problems on the Alpha.
2175
2176         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2177         control registers.
2178
2179 start-sanitize-arc
2180 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
2181
2182         * configure.in: Add ARC support.
2183         * disassemble.c: Likewise.
2184         * arc-dis.c, arc-opc.c: New files.
2185 end-sanitize-arc
2186
2187 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2188
2189         * sh-opc.h (mov.l gbr): Get direction right.
2190         * sh-dis.c (print_insn_shx): New function.
2191         (print_insn_shl, print_insn_sh): Call print_insn_shx to
2192         print opcodes with right byte order.
2193
2194 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
2195
2196         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2197         to avoid conflicts with getopt.
2198
2199 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2200
2201         * hppa-dis.c (print_insn_hppa): Read the instruction using
2202         bfd_getb32, so that it works on a little endian or 64 bit host.
2203         Remove unused local variable op.
2204
2205 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2206
2207         * mips-opc.c: Use or instead of addu for pseudo-op move, since
2208         addu does not work correctly if -mips3.
2209
2210 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2211
2212         * a29k-dis.c (print_special): Add special register names defined
2213         on 29030, 29040 and 29050.
2214         (print_insn): Handle new operand type 'I'.
2215
2216 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2217
2218         * Makefile.in (INSTALL): Use top level install.sh script.
2219
2220 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2221
2222         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2223         that it works on a little endian host.
2224
2225 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2226
2227         * configure.in: Use ${config_shell} when running config.bfd.
2228
2229 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2230
2231         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2232
2233 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2234
2235         * a29k-dis.c (print_insn): Print the opcode.
2236
2237 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2238
2239         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2240
2241 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
2242
2243         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2244
2245 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2246
2247         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2248         which store a value into memory.
2249
2250 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2251
2252         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2253         * arm-dis.c, arm-opc.h: New files.
2254
2255 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
2256
2257         * Makefile.in (ns32k-dis.o): Add dependency.
2258         * ns32k-dis.c (print_insn_arg): Declare initialized local as
2259         string, not as array of chars.
2260
2261 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
2262
2263         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2264
2265         * sparc-opc.c: Added sparclite extended FP operations, and
2266         versions of v9 impdep* instructions permitting specification of
2267         the OPF field.
2268
2269 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
2270
2271         * i960-dis.c (reg_names): Now const.
2272         (struct sparse_tabent): New type, copied from array type in mem
2273         function.
2274         (ctrl): Local static array ctrl_tab now const.
2275         (cobr): Local static array cobr_tab now const.
2276         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
2277         static variable mem_tab no longer explicitly initialized.  Changed
2278         mem_init to const array of struct sparse_tabent.
2279         (reg): Local static variable reg_tab no longer explicitly
2280         initialized.  Changed reg_init to const array of struct
2281         sparse_tabent.
2282         (ea): Local static array scale_tab now const.
2283
2284         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2285         (REG_MAX): Updated.
2286
2287 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
2288
2289         * configure.bat: the disassember needs to be enabled for
2290         "objdump -d" to work in djgpp.
2291
2292 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
2293
2294         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2295         (invalid_float): Enabled general version, doesn't require running
2296         on ns32k host.  Changed to take char* argument, and test for
2297         explicitly specified sizes, instead of using sizeof() on host CPU
2298         types.
2299         (INVALID_FLOAT): Cast first argument.
2300         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2301         list_P032, list_M032): Now const.
2302         (optlist, list_search): Made appropriate arguments now point to
2303         const.
2304         (print_insn_arg): Changed static array of one-character-string
2305         pointers into a static const array of characters; fixed sprintf
2306         statement accordingly.
2307
2308 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
2309
2310         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
2311         from distribution. A ns32k-dis.c from a previous distribution has
2312         been brought up to date and supports the new interface.
2313
2314         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2315
2316         * configure.in: add bfd_ns32k_arch target support.
2317
2318         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2319         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2320
2321 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
2322
2323         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2324         disassembly right.
2325
2326 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
2327
2328         * h8300-dis.c, mips-dis.c: Don't use true and false.
2329
2330 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
2331
2332         * configure.in: Change --with-targets to --enable-targets.
2333
2334 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2335
2336         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2337         opcodes to the first instruction with that opcode, to speed
2338         disassembly of large files.  From ralphc@pyramid.com (Ralph
2339         Campbell).
2340
2341 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2342
2343         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2344
2345 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
2346
2347         * configure.bat: update to latest makefile.in
2348
2349 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
2350
2351         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2352         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2353         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2354         slot insn is in a delay slot.
2355         * z8k-opc.h: (resflg): Fix patterns.
2356         * h8500-opc.h Fix CR insn patterns.
2357
2358 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2359
2360         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2361         "cmpl" before POWER versions, so that gas -many uses them.
2362
2363 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
2364
2365         * disassemble.c: New file.
2366         * Makefile.in (OFILES): Add disassemble.o.
2367         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2368         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
2369         binutils/configure.in.
2370
2371         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2372         opcode being examined.
2373
2374 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2375
2376         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2377         (insert_ral, insert_ram, insert_ras): New functions.
2378         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2379         RAS for store with update.
2380
2381 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2382
2383         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
2384         (edelsohn@npac.syr.edu).
2385
2386 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2387
2388         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2389         immediate argument.
2390
2391 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
2392
2393         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2394
2395 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2396
2397         * ppc-opc.c (powerpc_operands): The signedp field has been
2398         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
2399         instead.  Add new operand SISIGNOPT.
2400         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2401         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2402         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2403         than signedp field.
2404
2405 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2406
2407         * i386-dis.c (struct private):  Renamed to dis_private. `private'
2408         is a reserved word for dynix cc.
2409
2410 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2411
2412         * configure.in: Change error message to refer to bfd/config.bfd
2413         rather than bfd/configure.in.
2414
2415 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
2416
2417         * ppc-opc.c: Define POWER2 as short alias flag.
2418         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2419         fsqrt.
2420
2421 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2422
2423         * i960-dis.c (print_insn_i960): Don't read a second word for
2424         opcodes 0, 1, 2 and 3.
2425
2426 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2427
2428         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2429
2430 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2431
2432         * m68881-ext.c: Removed; no longer used.
2433         * Makefile.in: Changed accordingly.
2434
2435         * m68k-dis.c (ext_format_68881): Don't declare.
2436         (print_insn_m68k): If an instruction uses place 'i', it uses at
2437         least four fixed bytes.
2438         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
2439         extended float, convert to double using floatformat_to_double, not
2440         ieee_extended_to_double, and fetch the data before converting it.
2441
2442 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2443
2444         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
2445         davidj@ICSI.Berkeley.EDU (David Johnson).
2446
2447 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2448
2449         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2450         PowerPC uses bdnz[l][a].
2451
2452 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2453
2454         * dis-buf.c, i386-dis.c:  Include sysdep.h.
2455
2456 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2457
2458         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2459
2460         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2461         by Motorola PowerPC 601 with PPC_OPCODE_601.
2462         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2463         Disassemble Motorola PowerPC 601 instructions as well as normal
2464         PowerPC instructions.
2465
2466 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2467
2468         * i960-dis.c (reg, mem): Just use a static array instead of
2469         calling xmalloc.
2470
2471 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
2472
2473         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2474         condition name index if this is for a negated condition.
2475
2476         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2477         Floating point format for 'H' operand is backwards from normal
2478         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
2479         operands (fmpyadd and fmpysub), handle bizarre register
2480         translation correctly for single precision format.
2481
2482         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2483         or 'I' operands if the next format specifier is 'M' (fcmp
2484         condition completer).
2485
2486 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2487
2488         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2489         single number giving a bitmask for the MB and ME fields of an M
2490         form instruction.  Change NB to accept 32, and turn it into 0;
2491         also turn 0 into 32 when disassembling.  Seperated SH from NB.
2492         (insert_mbe, extract_mbe): New functions.
2493         (insert_nb, extract_nb): New functions.
2494         (SC_MASK): Mask out SA and LK bits.
2495         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2496         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
2497         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
2498         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2499         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2500         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
2501         (powerpc_macros): Define table of macro definitions.
2502         (powerpc_num_macros): Define.
2503
2504         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2505         if PPC_OPERAND_NEXT is set.
2506
2507 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2508
2509         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2510         char.  Retrieve contents using bfd_getl32 instead of shifting.
2511
2512 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2513
2514         * ppc-opc.c: New file.  Opcode table for PowerPC, including
2515         opcodes for POWER (RS/6000).
2516         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
2517         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2518         (CFILES): Add ppc-dis.c.
2519         (ppc-dis.o, ppc-opc.o): New targets.
2520         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2521
2522 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
2523
2524         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2525         No space before 'u', 'f', or 'N'. 
2526
2527 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
2528
2529         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2530         farther than we should.
2531
2532         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2533
2534 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
2535
2536         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2537
2538 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
2539
2540         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2541         needs it, to prevent reading past the end of a section.
2542
2543 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2544
2545         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2546         Removed t,A case for la; always use t,A(b) case.
2547
2548 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2549
2550         From Ted Lemen <mellon@pepper.ncd.com>
2551         * mips-dis.c (print_insn_arg): Handle 'k'.
2552         * mips-opc.c: Make cache use k, not t.
2553
2554 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2555
2556         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
2557         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct 
2558         FLOAT_FORMAT_CODE to put out floating point register names.
2559
2560 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2561
2562         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2563
2564 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2565
2566         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2567
2568 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2569
2570         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2571         larger than 32.  Moved dsxx32 variants first for disassembler.
2572
2573 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
2574
2575         * z8kgen.c, z8k-opc.h: Add full lda information.
2576
2577 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
2578
2579         * hppa-dis.c (print_insn_hppa): Do not emit a space after
2580         movb instructions.  Any necessary space will be emitted by
2581         the code to handle nullification completers.
2582
2583 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2584
2585         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2586
2587 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2588
2589         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
2590         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
2591
2592 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2593
2594         * mips-opc.c: Correct lwu opcode value (book had it wrong).
2595
2596 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
2597
2598         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2599         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2600
2601 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
2602
2603         * m88k-dis.c (m88kdis): comment change.  Remove space after
2604           printing mnemonic.
2605           (printop): handle new arg types DEC and XREG for m88110.
2606
2607 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
2608
2609         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2610         type for absolute branch addresses.  Delete special
2611         "ble" and "be" code in 'W' operand code.
2612
2613 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2614
2615         * mips-opc.c: Set hazard information correctly for branch
2616         likely instructions.
2617
2618 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2619
2620         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
2621         info->fprintf_func for printing and info->print_address_func for
2622         address output.
2623
2624 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2625
2626         * mips-opc.c: Set INSN_TRAP for tXX instructions.
2627
2628 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2629
2630         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2631         Corrected second case of "b" for disassembler.
2632
2633 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2634
2635         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
2636         to BFD swapping routines to correspond to BFD name changes.
2637
2638 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2639
2640         * mips-opc.c: Change div machine instruction to be z,s,t rather
2641         than s,t.  Change div macro to be d,v,t rather than d,s,t.
2642         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
2643         rem and remu which generates only the corresponding div
2644         instruction.  This is for compatibility with the MIPS assembler,
2645         which only generates the simple machine instruction when an
2646         explicit destination of $0 is used.
2647         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2648
2649 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2650
2651         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2652         WR_31 hazard for bal, bgezal, bltzal.
2653
2654 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
2655
2656         * hppa-dis.c (print_insn_hppa): Use print function
2657         from within the disassemble_info, not fprintf_filtered.
2658
2659 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2660
2661         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
2662         Law, law@cs.utah.edu.)
2663
2664 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2665
2666         * mips-opc.c ("absu"): Removed.
2667         ("dabs"): Added.
2668
2669 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2670
2671         * mips-opc.c: Added r6000 and r4000 instructions and macros.
2672         Changed hazard information to distinguish between memory load
2673         delays and coprocessor load delays.
2674
2675 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2676
2677         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
2678
2679 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
2680
2681         * configure.in: Don't pass cpu to config.bfd.
2682
2683 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2684
2685         * m88k-dis.c (m88kdis): Make class unsigned.
2686
2687 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
2688
2689         * alpha-dis.c (print_insn_alpha): One branch format case was
2690         missing the instruction name.
2691
2692 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
2693
2694         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2695         Add the arch-specific auxiliary files.
2696         (OFILES): Remove the arch-specific auxiliary files
2697         and use BFD_MACHINES instead of DIS_LIBS.
2698         * configure.in: Set BFD_MACHINES based on --with-targets option.
2699
2700 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2701
2702         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
2703         for swc1.
2704
2705 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
2706
2707         * sparc-opc.c: Change CONST to const to deal with gcc
2708         -Dconst=__const -traditional.
2709
2710 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2711
2712         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2713         coprocessor instructions out of #if 0, and made them use new
2714         argument type "C".
2715
2716 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
2717
2718         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2719
2720 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
2721
2722         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2723         instruction, for use by the disassembler.
2724
2725         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
2726         hand-coded sign extensions that depended on 32-bit host ints.
2727         FIXME, we still depend on big-endian host bitfield ordering.
2728         (sparc_print_insn):  Set the insn_info_valid field, and the
2729         other fields that describe the instruction being printed.
2730
2731 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
2732
2733         * sparc-opc.c (call): Accept all 6 addressing modes valid for
2734         `jmp' instead of just one of them.
2735
2736 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
2737
2738         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2739         (fput_fp_reg_r): Renamed from fput_reg_r.
2740         (fput_fp_reg): New function.
2741         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2742
2743         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2744
2745         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2746
2747 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
2748
2749         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2750
2751         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2752         don't output a space.
2753
2754         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2755
2756 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
2757
2758         * mips-opc.c: New file, containing opcode table from
2759         ../include/opcode/mips.h.
2760         * Makefile.in: Add it.
2761
2762 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2763
2764         * m88k-dis.c: New file, moved in from gdb and changed to use the
2765         new dis-asm.h disassembler interface.
2766         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2767         (m88k-dis.o): New target.
2768
2769 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
2770
2771         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2772         argument string const char * to correspond to opcode/mips.h.
2773
2774 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
2775
2776         * mips-dis.c: Updated to account for name changes in new version
2777         of opcode/mips.h.
2778         * Makefile.in: Added header file dependencies.
2779
2780 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
2781
2782         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2783
2784 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
2785
2786         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2787         extend, rather than shifts.
2788
2789 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
2790
2791         * Makefile.in: Undo 15 June change.
2792
2793 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
2794
2795         * m68k-dis.c (print_insn_arg):  Change return value to byte count
2796         or error code.
2797         * m68k-dis.c:  Re-write to detect invalid operands before
2798         printing anything, so we can handle this the same way we
2799         handle invalid opcodes.
2800
2801 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
2802
2803         * sh-dis.c, sh-opc.h: Understand some more opcodes.
2804
2805 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
2806
2807         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2808         header files.
2809
2810 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2811
2812         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2813
2814         * configure.in: Do make sysdep.h link.
2815         * Makefile.in: Search ../include.  Don't search ../bfd.
2816
2817 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
2818
2819         Changes from Jeff Law, law@cs.utah.edu:
2820         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
2821         Do not print a space before the completers specified by
2822         'a' and 'd'.
2823
2824 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
2825
2826         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2827         defined, since gdb has been fixed.
2828
2829         Changes from Jeff Law, law@cs.utah.edu:
2830         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg, 
2831         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2832         be a *disassemble_info, not a *FILE.
2833         * hppa-dis.c: Support 'd', '!', and 'a'.
2834         * hppa-dis.c: Support 's' to extract a 2 bit space register.
2835         * hppa-dis.c: Delete cases which are no longer needed.
2836
2837 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
2838
2839         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2840
2841 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
2842
2843         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2844         H8/300-H opcodes.
2845
2846 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
2847
2848         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2849         * configure.in:  No longer need to configure to get sysdep.h.
2850
2851 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
2852
2853         * Patches from Jeffrey Law <law@cs.utah.edu>.
2854         * hppa-dis.c: Support 'I', 'J', and 'K' in output
2855         templates for 1.1 FP computational instructions.
2856
2857 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2858
2859         * h8500-dis.c (print_insn_h8500): Address argument is type
2860         bfd_vma.
2861         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2862         Ditto.
2863
2864         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2865         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2866
2867         * sparc-dis.c (compare_opcodes): Move static declaration to
2868         top-level.
2869
2870 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2871
2872         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2873         instruction, remove unimp hack from 'l' argument.
2874
2875 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
2876
2877         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
2878         happy.
2879
2880 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
2881
2882         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2883         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2884         instructions.
2885
2886 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2887
2888         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
2889         arrays of string pointers to 2-d arrays of chars, to save
2890         space.
2891
2892 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
2893
2894         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2895         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2896
2897 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
2898
2899         * hppa-dis.c: New file from Utah, adapted to new disassembler
2900         calling interface.
2901         * Makefile.in: Include it.
2902
2903 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
2904
2905         * sh-dis.c, sh-opc.h: New files.
2906
2907 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
2908
2909         * alpha-dis.c, alpha-opc.h: New files.
2910
2911 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2912
2913         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2914         value.
2915
2916 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
2917
2918         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2919
2920 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
2921
2922         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2923         const.
2924
2925 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
2926
2927         * sparc-dis.c: Use fprintf_func a few places where I forgot,
2928         and double percent signs a few places.
2929
2930         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2931
2932         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2933         Use info->print_address_func not print_address.
2934
2935         * dis-buf.c (generic_print_address): New function.
2936
2937 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
2938
2939         * Makefile.in: Add sparc-dis.c.
2940         sparc-dis.c: New file, merges binutils and gdb versions as follows:
2941         From GDB:
2942             Add `add' instruction to the set that get checked
2943             for a preceding `sethi' in order to print an absolute address.
2944             * (print_insn):  Disassembly prefers real instructions.
2945             (is_delayed_branch):  Speed up.
2946             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
2947             Still missing some float ops, and needs testing.
2948             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2949             F_ALIAS.  Use printf, not fprintf, when not passing a file
2950             pointer...
2951             (compare_opcodes): Check that identical instructions have
2952             identical opcodes, complain otherwise.
2953         From binutils:
2954             * New 'm' arg.
2955             * Include reg_names.
2956         From neither:
2957             Use dis-asm.h/read_memory_func interface.
2958
2959 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
2960
2961         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2962           deliberately return non-zero to setjmp from longjmp.  Otherwise
2963           this code fails to compile.
2964
2965 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
2966
2967         * m68k-dis.c:  Fix prototype for fetch_arg().
2968
2969 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
2970
2971         * dis-buf.c: New file, for new read_memory_func interface.
2972         Makefile.in (OFILES): Include it.
2973         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2974         Use new read_memory_func interface.
2975
2976 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
2977
2978         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2979         * h8500-opc.h: Fix couple of opcodes.
2980
2981 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
2982
2983         * Makefile.in: add dvi & installcheck targets
2984
2985 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
2986
2987         * Makefile.in:  Update for h8500-dis.c.
2988
2989 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
2990
2991         * h8500-dis.c, h8500-opc.h: New files
2992
2993 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
2994
2995         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
2996         ../include/dis-asm.h.
2997         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
2998         and ../gdb/m68k-pinsn.c).
2999         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
3000         and ../gdb/i386-pinsn.c).
3001         * m68881-ext.c:  New file.  Moved definition of
3002         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3003         * Makefile.in:  Adjust for new files.
3004         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
3005         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
3006         can be dis-assembled.
3007
3008 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3009
3010         * mips-dis.c (print_insn_arg): Now returns void.
3011
3012 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
3013
3014         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
3015         files that use the macros.
3016
3017 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3018
3019         * mips-dis.c: New file, from gdb/mips-pinsn.c.
3020         * Makefile.in (DIS_LIBS): Added mips-dis.o.
3021         (CFILES): Added mips-dis.c.
3022
3023 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3024
3025         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3026         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3027
3028 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
3029
3030         * Makefile.in:  Improve *clean rules.
3031         * configure.in:  Allow a default host.
3032
3033 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3034
3035         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3036         files include other sysdep files
3037
3038 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3039
3040         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3041
3042 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
3043
3044         * configure.in:  For host support, use ../bfd/configure.host
3045         so it stays in sync with the ../bfd/hosts database.
3046
3047 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3048
3049         * configure.in: use cpu-vendor-os triple instead of nested cases
3050
3051 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
3052
3053         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3054         *always* the wrong one.
3055
3056 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3057
3058         * z8kgen.c: added copyright info
3059
3060 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3061
3062         * z8k-dis.c (unparse_instr): prettier tabs
3063         * z8kgen.c -> z8k-opc.h: bug fixes in tables
3064
3065 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
3066
3067         * configure.in:  Add ncr* configuration.
3068         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
3069         picayune ANSI compilers happy.
3070
3071 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
3072
3073         * configure.in (i386):  Make i386 and i486 synonymous for now.
3074         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
3075
3076 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3077
3078         * Makefile.in (install): Fix typo.
3079
3080 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
3081
3082         * Makefile.in (make):  Remove obsolete crud.
3083         (sparc-opc.o):  Avoid Sun Make VPATH bug.
3084
3085 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
3086
3087         * Makefile.in: since there are no SUBDIRS, remove rule and
3088         references of subdir_do.
3089
3090 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3091
3092         * Makefile.in (install): Get the library name right here too.
3093         Don't install bfd.h, since it's unrelated to this library.  No
3094         subdirs to recurse into, either.
3095         (CFILES): The source file has a .c suffix, not .o.
3096
3097         * sparc-opc.c: New file, moved from BFD.
3098         * Makefile.in (OFILES): Build it.
3099
3100 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
3101
3102         * z8k-dis.c: fixed forward refferences of some declarations.
3103
3104 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
3105
3106         * Makefile.in: get the name of the library right
3107
3108 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3109
3110         * z8k-dis.c: knows how to disassemble z8k stuff
3111         * z8k-opc.h: new file full of z8000 opcodes
3112
3113 \f
3114 Local Variables:
3115 version-control: never
3116 End: