1 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
3 * sparc-opc.c (sparc_opcodes): Fix assembler args to
4 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
5 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
8 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
10 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
12 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
14 * cgen-asm.c (cgen_parse_address): New argument resultp.
16 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
18 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
20 * mn10200-dis.c (disassemble): PC relative instructions are
21 relative to the next instruction, not the current instruction.
23 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
25 * v850-dis.c (disassemble): Only signed extend values that are not
26 returned by extract functions.
27 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
29 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
31 * v850-opc.c: Update comments. Remove use of
32 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
34 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
36 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
38 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
40 * configure: Rebuilt with latest devo autoconf for NT support.
42 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
44 * v850-dis.c (disassemble): Use curly brace syntax for register
47 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
48 where r0 is being used as a destination register.
51 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
53 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
57 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
59 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
60 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
61 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
62 Add insns to access SGR and DBR.
63 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
66 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
68 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
70 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
72 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
74 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
79 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
81 * configure (cgen_files): Add support for v850e target.
82 * configure.in (cgen_files): Add support for v850e target.
86 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
88 * configure (cgen_files): Add support for v850eq target.
89 * configure.in (cgen_files): Add support for v850eq target.
92 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
94 * configure.in (bfd_arc_arch): Add.
96 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
97 * Makefile.in: Rebuild.
98 * arc-dis.c, arc-opc.c: New files.
99 * disassemble.c (ARCH_all): Define ARCH_arc.
100 (disassembler): Add ARC support.
102 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
104 start-sanitize-v850eq
105 * .Sanitize (Do-first): Add support for keep-v850eq command line
108 * v850-dis.c (disassemble): Add support for v850EQ instructions.
110 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
111 (v850_opcodes): Add v850EQ instructions.
114 * .Sanitize (Do-first): Add support for keep-v850e command line
117 * v850-dis.c (disassemble): Add support for v850E instructions.
119 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
120 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
121 insert_spe, extract_spe): New Functions.
122 (v850_opcodes): Add v850E instructions.
125 * v850-opc.c: Reorganised and re-layed out to improve readability
128 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
130 * configure: Rebuild with autoconf 2.12.1.
132 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
134 * aclocal.m4, configure: Rebuild with new automake patches.
136 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
138 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
139 * acinclude.m4: Just include acinclude.m4 from BFD.
140 * aclocal.m4, configure: Rebuild.
142 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
144 * Makefile.am: New file, based on old Makefile.in.
145 * acconfig.h: New file.
146 * acinclude.m4: New file.
147 * stamp-h.in: New file.
148 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
149 Removed shared library handling; now handled by libtool. Replace
150 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
151 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
152 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
153 handling in AC_OUTPUT.
154 * dep-in.sed: Change .o to .lo.
155 * Makefile.in: Now built with automake.
156 * aclocal.m4: Now built with aclocal.
157 * config.in, configure: Rebuild.
159 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
161 * mips-opc.c: Fix typo/thinko in "eret" instruction.
164 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
166 * mips-opc.c: Fix coding of mtsa.
169 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
171 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
173 * sparc-dis.c (sorted_opcodes): New static local.
174 (struct opcode_hash): `opcode' is pointer to const element.
175 (build_hash): First arg is now table of sorted pointers.
176 (print_insn_sparc): Sort opcodes by sorting table of pointers.
177 (compare_opcodes): Update.
179 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
181 * cgen-opc.c: #include <ctype.h>.
182 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
183 Handle case insensitive hashing.
184 (hash_keyword_value): Change type of `value' to unsigned int.
186 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
188 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
189 precision FP, mark it as such. Likewise for double precision
190 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
193 (mips_builtin_opcodes): Remove non-existant r5900 instructions
197 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
199 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
200 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
203 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
205 * ppc-opc.c (extract_nsi): make unsigned expression signed before
207 (UNUSED): remove one level of parens, so MSVC doesn't choke on
208 nesting depth when all the macros are expanded.
210 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
212 * sparc-opc.c: The fcmp v9a instructions take an integer register
213 as a destination, not a floating point register. From Christian
214 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
216 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
218 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
219 syntax. From Roman Hodek
220 <rnhodek@faui22c.informatik.uni-erlangen.de>.
222 * i386-dis.c (twobyte_has_modrm): Fix pand.
224 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
226 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
228 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
230 * arm-dis.c: Add prototypes for arm_decode_shift and
233 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
235 * mips-opc.c: Add r3900 insns.
237 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
239 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
240 print delay slot instructions on the same line. When using a PC
241 relative load, add a comment with the value being loaded if it can
244 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
246 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
247 to pushS/popS for segment regs and byte constant so that
248 pushw/popw printed when in 16 bit data mode.
250 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
251 print cbtw, cwtd in 16 bit data mode.
252 * i386-dis.c (putop): extra case W to support above.
254 * i386-dis.c (print_insn_x86): print addr32 prefix when given
255 address size prefix in 16 bit address mode.
257 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
259 * sh-dis.c: Reindent. Rename local variable fprintf to
262 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
264 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
266 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
268 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
270 * mips16-opc.c (mip16_opcodes): same.
272 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
274 * m68k-opc.c (moveb): Change $d to %d.
276 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
278 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
279 (twobyte_has_modrm): Likewise.
281 (OP_MMX, OP_EM, OP_MS): New static functions.
283 * i386-dis.c: Revert patch of April 4. The output now matches
286 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
288 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
291 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
293 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
295 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
297 * Makefile.in (install): Depend upon installdirs.
298 (installdirs): New target.
300 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
302 From Thomas Graichen <graichen@rzpd.de>:
303 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
304 * configure: Rebuild.
306 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
308 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
309 Delete string{,s}.h support.
311 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
313 * cgen-asm.c (cgen_parse_operand_fn): New global.
314 (cgen_parse_{{,un}signed_integer,address}): Update call to
315 cgen_parse_operand_fn.
316 (cgen_init_parse_operand): New function.
317 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
318 from cgen_asm_init_parse.
319 (m32r_cgen_assemble_insn): New operand `errmsg'.
320 Delete call to as_bad, return error message to caller.
321 (m32r_cgen_asm_hash_keywords): #if 0 out.
323 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
325 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
327 [case 'J']: Fix typo in register name.
329 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
331 * configure.in: Substitute SHLIB_LIBS.
332 * configure: Rebuild.
333 * Makefile.in (SHLIB_LIBS): New variable.
334 ($(SHLIB)): Use $(SHLIB_LIBS).
336 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
338 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
340 * cgen-opc.c (hash_keyword_name): Improve algorithm.
342 * disassemble.c (disassembler): Handle m32r.
344 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
346 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
347 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
348 * Makefile.in (CFILES): Add them.
349 (ALL_MACHINES): Add them.
350 (dependencies): Regenerate.
351 * configure.in (cgen_files): New variable.
352 (bfd_m32r_arch): Add entry.
353 * configure: Regenerate.
355 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
357 * configure.in: Correct file names for bfd_mn10[23]00_arch.
358 * configure: Rebuild.
360 * Makefile.in: Rebuild dependencies.
362 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
364 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
367 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
369 * Branched binutils 2.8.
371 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
373 * m10200-dis.c: Rename from mn10200-dis.c.
374 * m10200-opc.c: Rename from mn10200-opc.c.
375 * m10300-dis.c: Rename from mn10300-dis.c
376 * m10300-opc.c: Rename from mn10300-opc.c.
377 * Makefile.in: Update accordingly.
379 * mips16-opc.c: Add mul and dmul macros.
381 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
383 * makefile.vms: Update CFLAGS, add clean target.
385 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
387 * mips-opc.c: Add "wait". From Ralf Baechle
388 <ralf@gnu.ai.mit.edu>.
390 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
391 * configure, config.in: Rebuild.
392 * sysdep.h: Include <stdlib.h> if it exists.
393 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
395 * Makefile.in: Rebuild dependencies.
397 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
399 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
400 Andrew Bray <andy@madhouse.demon.co.uk>.
402 * mips-opc.c: Add cast when setting mips_opcodes.
404 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
406 * v850-dis.c (disassemble): Fix sign extension problem.
407 * v850-opc.c (extract_d*): Fix sign extension problems to make
408 disassembly calculate branch offsets correctly.
410 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
412 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
414 * mips-opc.c: Add dctr and dctw.
417 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
419 * d30v-dis.c (print_insn): Change the way signed constants
422 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
424 * Makefile.in (BFD_H): New variable.
425 (HFILES): New variable.
426 (CFILES): Add all C files.
427 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
428 Delete old dependencies, and build new ones.
429 * dep-in.sed: New file.
431 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
433 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
435 start-sanitize-coldfire
436 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
438 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
441 end-sanitize-coldfire
442 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
444 * mn10200-opc.c: Change "trap" to "syscall".
445 * mn10300-opc.c: Add new "syscall" instruction.
447 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
449 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
450 mulul insns on the coldfire.
452 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
454 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
455 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
456 (print_insn_little_arm): Likewise.
458 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
460 Based on patches from H.J. Lu <hjl@lucon.org>:
461 * i386-dis.c (fetch_data): Add prototype.
462 * m68k-dis.c (fetch_data): Add prototype.
463 (dummy_print_address): Add prototype. Make static.
464 * ppc-opc.c (valid_bo): Add prototype.
465 * sparc-dis.c (build_hash_table): Add prototype.
466 (is_delayed_branch, compute_arch_mask): Add prototypes.
467 (print_insn_sparc): Make several local variables const.
468 (compare_opcodes): Change arguments to const PTR. Add prototype.
469 * sparc-opc.c (arg): Change name field to be const.
470 (lookup_name, lookup_value): Add prototypes. Change table and
471 name parameters to be const.
472 (sparc_encode_asi): Change name parameter to be const.
473 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
474 (sparc_encode_sparclet_cpreg): Likewise.
475 (sparc_decode_asi): Change return type to be const.
476 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
477 (sparc_decode_sparclet_cpreg): Likewise.
479 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
481 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
482 Solaris doesn't like the combined options, and the -f is
484 (stamp-tshlink, install): Likewise.
486 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
488 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
491 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
493 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
495 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
497 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
500 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
502 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
505 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
507 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
509 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
511 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
514 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
516 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
517 floatformat_to_double to make portable.
518 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
521 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
523 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
524 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
526 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
528 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
529 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
532 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
534 * tic80-opc.c (LSI_SCALED): Renamed from this ...
535 (OFF_SL_BR_SCALED): ... to this, and added the flag
536 TIC80_OPERAND_BASEREL to the flags word.
537 (tic80_opcodes): Replace all occurances of LSI_SCALED with
541 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
543 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
544 Change mips_opcodes from const array to a pointer,
545 and change bfd_mips_num_opcodes from const int to int,
546 so that we can increase the size of the mips opcodes table
550 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
552 * tic80-opc.c (tic80_predefined_symbols): Revert change to
553 store BITNUM values in the table in one's complement form
554 to match behavior when assembler is given a raw numeric
555 value for a BITNUM operand.
556 * tic80-dis.c (print_operand_bitnum): Ditto.
560 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
562 * d30v-opc.c: Removed references to FLAG_X.
565 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
567 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
570 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
572 * Makefile.in: Added d30v object files.
573 * configure: (bfd_d30v_arch) Rebuilt.
574 * configure.in: (bfd_d30v_arch) Added new case.
575 * d30v-dis.c: New file.
576 * d30v-opc.c: New file.
577 * disassemble.c (disassembler) Add entry for d30v.
581 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
583 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
584 representations for the floating point BITNUM values.
586 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
588 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
589 in the table in one's complement form, as they appear in the
591 (tic80_symbol_to_value): Use macros to access predefined
593 (tic80_value_to_symbol): Ditto.
594 (tic80_next_predefined_symbol): New function.
595 * tic80-dis.c (print_operand_bitnum): Remove code that did
596 one's complement for BITNUM values.
600 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
602 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
605 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
607 * makefile.vms: Remove 8 bit characters. Update to latest
610 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
612 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
614 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
616 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
617 (IMM24_PCREL): Likewise.
619 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
621 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
622 address for an extended PC relative instruction that is not a
625 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
627 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
631 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
633 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
634 (tic80_opcodes): Sort entries so that long immediate forms
635 come after short immediate forms, making it easier for
636 assembler to select the right one for a given operand.
639 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
641 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
643 (print_insn_mips16): Likewise.
646 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
648 * mips-opc.c: add r5900.
652 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
654 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
655 a symbol class that restricts translation to just that
656 class (general register, condition code, etc).
658 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
660 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
661 and REG_DEST_E for register operands that have to be
662 an even numbered register. Add REG_FPA for operands that
663 are one of the floating point accumulator registers.
664 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
665 (tic80_opcodes): Change entries that need even numbered
666 register operands to use the new operand table entries.
667 Add "or" entries that are identical to "or.tt" entries.
670 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
672 * mips16-opc.c: Add new cases of exit instruction for
674 * mips-dis.c (print_mips16_insn_arg): Display floating point
675 registers in operands of exit instruction. Print `$' before
676 register names in operands of entry and exit instructions.
679 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
681 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
682 pairs for all predefined symbols recognized by the assembler.
683 Also used by the disassembling routines.
684 (tic80_symbol_to_value): New function.
685 (tic80_value_to_symbol): New function.
686 * tic80-dis.c (print_operand_control_register,
687 print_operand_condition_code, print_operand_bitnum):
688 Remove private tables and use tic80_value_to_symbol function.
691 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
693 * d10v-dis.c (print_operand): Change address printing
694 to correctly handle PC wrapping. Fixes PR11490.
696 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
698 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
701 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
703 * mips-dis.c (print_insn_mips16): Set insn_info information.
704 (print_mips16_insn_arg): Likewise.
706 * mips-dis.c (print_insn_mips16): Better handling of an extend
707 opcode followed by an instruction which can not be extended.
709 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
711 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
712 coldfire moveb instruction to not allow an address register as
713 destination. Although the documentation does not indicate that
714 this is invalid, experiments uncovered unexpected behavior.
715 Added a comment explaining the situation. Thanks to Andreas
716 Schwab for pointing this out to me.
719 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
721 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
722 entries are presorted so that entries with the same mnemonic are
723 adjacent to each other in the table. Sort the entries for each
724 instruction so that this is true.
727 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
729 * m68k-dis.c: Include <libiberty.h>.
730 (print_insn_m68k): Sort the opcode table on the most significant
731 nibble of the opcode.
734 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
736 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
737 "vsub", "vst", "xnor", and "xor" instructions.
738 (V_a1): Renamed from V_a, msb of accumulator reg number.
739 (V_a0): Add macro, lsb of accumulator reg number.
741 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
743 * tic80-dis.c (print_insn_tic80): Broke excessively long
744 function up into several smaller ones and arranged for
745 the instruction printing function to be callable recursively
746 to print vector instructions that have both a load and a
747 math instruction packed into a single opcode.
748 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
749 to explain why it comes after the other vector opcodes.
752 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
754 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
755 move insns to handle immediate operands.
757 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
759 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
760 fix operand mask in the "moveml" entries for the coldfire.
763 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
765 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
766 New macros for building vector instruction opcodes.
767 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
768 FMT_LI, which were unused. The field is now a flags field.
769 Remove some opcodes that are possible, but illegal, such
770 as long immediate instructions with doubles for immediate
771 values. Add "vadd" and "vld" instructions.
773 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
775 * tic80-opc.c (tic80_operands): Reorder some table entries to make
776 the order more logical. Move the shift alias instructions ("rotl",
777 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
778 interspersed with the regular sr.x and sl.x instructions. Add
779 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
780 "sub", "subu", "swcr", and "trap".
782 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
784 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
785 (OFF_SL_PC): Renamed from OFF_SL.
786 (OFF_SS_BR): New operand type for base relative operand.
787 (OFF_SL_BR): New operand type for base relative operand.
788 (REG_BASE): New operand type for base register operand.
789 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
790 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
791 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
793 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
794 10 char field, padded with spaces on rhs, rather than a string
795 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
796 than old TIC80_OPERAND_RELATIVE. Add support for new
797 TIC80_OPERAND_BASEREL flag bit.
799 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
801 * tic80-dis.c (print_insn_tic80): Print floating point operands
803 * tic80-opc.c (SPFI): Add single precision floating point
804 immediate operand type.
805 (ROTATE): Add rotate operand type for shifts.
806 (ENDMASK): Add for shifts.
807 (n): Macro for the 'n' bit.
808 (i): Macro for the 'i' bit.
809 (PD): Macro for the 'PD' field.
810 (P2): Macro for the 'P2' field.
811 (P1): Macro for the 'P1' field.
812 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
816 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
818 * mn10200-dis.c (disassemble): Mask off unwanted bits after
819 adding in current address for pc-relative operands.
822 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
824 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
825 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
826 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
827 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
828 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
829 REG_BASE_M_SI, REG_BASE_M_LI respectively.
830 (REG_SCALED, LSI_SCALED): New operand types.
831 (E): New macro for 'E' bit at bit 27.
832 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
833 opcodes, including the various size flavors (b,h,w,d) for
834 the direct load and store instructions.
836 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
838 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
840 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
841 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
842 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
843 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
844 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
845 masks with "MASK_* & ~M_*" to get the M bit reset.
846 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
848 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
850 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
851 correctly. Add support for printing TIC80_OPERAND_BITNUM and
852 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
854 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
855 CC, SICR, and LICR table entries.
856 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
857 "bcnd", and "brcr" opcodes.
860 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
862 * ppc-opc.c (powerpc_operands): Make comment match the
863 actual fields (no shift field).
864 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
866 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
867 partial implementation, work in progress.
868 * tic80-opc.c (tic80_operands): Begin construction operands table.
869 (tic80_opcodes): Continue populating opcodes table and start
870 filling in the operand indices.
871 (tic80_num_opcodes): Add this.
874 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
876 * m68k-opc.c: Add #B case for moveq.
878 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
880 * mn10300-dis.c (disassemble): Make sure all variables are initialized
881 before they are used.
883 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
885 * v850-opc.c (v850_opcodes): Put curly-braces around operands
886 for "breakpoint" instruction.
888 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
890 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
891 (dep): Use ALL_CFLAGS rather than CFLAGS.
893 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
895 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
898 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
900 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
902 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
905 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
907 * mips16-opc.c: Add "abs".
910 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
912 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
913 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
914 (disassembler): Add bfd_arch_tic80 support to set disassemble
916 * tic80-dis.c (print_insn_tic80): Add stub.
918 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
920 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
921 * configure: Regenerate with autoconf.
922 * tic80-dis.c: Add file.
923 * tic80-opc.c: Add file.
926 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
928 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
930 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
932 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
933 (mn10200_opcodes): Use it for some logicals and btst insns.
934 Add "break" and "trap" instructions.
936 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
938 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
940 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
942 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
943 relative load or add now depends upon whether the instruction is
946 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
948 * mn10200-dis.c: Finish writing disassembler.
949 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
950 Fix mask for "jmp (an)".
952 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
953 handle endianness issues for mn10300.
955 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
957 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
959 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
960 instruction. Fix opcode field for "movb (imm24),dn".
962 * mn10200-opc.c (mn10200_operands): Fix insertion position
965 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
967 * mn10200-opc.c: Create mn10200 opcode table.
968 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
969 but moving along nicely.
971 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
973 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
975 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
977 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
978 specifiers for fmovem* instructions.
980 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
982 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
984 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
986 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
989 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
991 * mn10300-opc.c: Add some comments explaining the various
994 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
996 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
998 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1001 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1002 operand specifiers in fmovm* instructions.
1004 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1006 * ppc-opc.c (insert_li): Give an error if the offset has the two
1007 least significant bits set.
1009 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1011 * mips-dis.c (print_insn_mips16): Separate the instruction from
1012 the arguments with a tab, not a space.
1014 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1016 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1019 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1022 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1024 * configure: Rebuild with autoconf 2.12.
1026 Add support for mips16 (16 bit MIPS implementation):
1027 * mips16-opc.c: New file.
1028 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1029 (mips16_reg_names): New static array.
1030 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1031 after seeing a 16 bit symbol.
1032 (print_insn_little_mips): Likewise.
1033 (print_insn_mips16): New static function.
1034 (print_mips16_insn_arg): New static function.
1035 * mips-opc.c: Add jalx instruction.
1036 * Makefile.in (mips16-opc.o): New target.
1037 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1038 * configure: Rebuild.
1040 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1042 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1043 operand specifiers in *save, *restore and movem* instructions.
1045 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1048 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1049 register operands for immediate arithmetic, not, neg, negx, and
1050 set according to condition instructions.
1052 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1053 specifier of the effective-address operand in immediate forms of
1054 arithmetic instructions. The specifier for the immediate operand
1055 notes how and where the constant will be stored.
1057 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1059 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1062 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1065 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1067 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1069 * mn10300-dis.c (disassemble): Handle register lists.
1071 * mn10300-opc.c: Fix handling of register list operand for
1072 "call", "ret", and "rets" instructions.
1074 * mn10300-dis.c (disassemble): Print PC-relative and memory
1075 addresses symbolically if possible.
1076 * mn10300-opc.c: Distinguish between absolute memory addresses,
1077 pc-relative offsets & random immediates.
1079 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1081 (disassemble): Handle SPLIT and EXTENDED operands.
1083 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1085 * mn10300-dis.c: Rough cut at printing some operands.
1087 * mn10300-dis.c: Start working on disassembler support.
1088 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1090 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1092 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1094 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1096 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1098 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1100 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1101 register argument is calls and jmp instructions.
1103 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1105 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1106 getx operand. Fix opcode for mulqu imm,dn.
1108 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1110 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1111 in MN10300_OPERAND_SPLIT operands for how many bits
1112 appear in the basic insn word. Add IMM32_HIGH24,
1113 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1114 (mn10300_opcodes): Use new operands as needed.
1116 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1117 for bset, bclr, btst instructions.
1118 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1120 * mn10300-opc.c (mn10300_operands): Remove many redundant
1121 operands. Update opcode table as appropriate.
1122 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1123 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1125 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1127 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1128 operands (for indexed load/stores). Fix bitpos for DI
1129 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1130 few instructions that insert immediates/displacements in the
1131 middle of the instruction. Add IMM8E for 8 bit immediate in
1132 the extended part of an instruction.
1133 (mn10300_operands): Use new opcodes as appropriate.
1135 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1137 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1138 sequential so the assembler never parallelizes it with
1141 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1143 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1144 a data/address register that appears in register field 0
1145 and register field 1.
1146 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1148 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1150 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1151 standard disassembly.
1153 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1154 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1155 Recategorize PALcode instructions.
1157 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1159 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1161 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1163 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1164 there are no operand types.
1166 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1168 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1170 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1172 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1174 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1176 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1178 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1179 and sst.w instructions.
1181 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1184 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1186 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1189 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1191 * ppc-opc.c (PPCPWR2): Define.
1192 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1195 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1197 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1198 field for movhu instruction.
1200 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1201 cast value to "long" not "signed long" to keep hpux10
1204 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1206 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1209 * mn10300-opc.c (FMT*): Remove definitions.
1211 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1212 for shift-by-register opcodes.
1214 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1215 into [AD][MN][01] for encoding the position of the register
1218 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1220 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1221 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1223 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1225 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1226 Fix various typos. Add "PAREN" operand.
1227 (MEM, MEM2): Define.
1228 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1229 operands. Fix several typos.
1231 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1234 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1236 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1237 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1239 (mn10300_opcodes): Break opcode format out into its own field.
1240 Update many operand fields to deal with signed vs unsigned
1241 issues. Fix one or two typos in the "mov" instruction
1242 opcode, mask and/or operand fields.
1244 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1246 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1247 m68851 wasn't reset.
1249 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1251 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1252 all opcodes. Very rough cut at operands for all opcodes.
1254 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1257 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1259 * mn10200-opc.c, mn10300-opc.c: New files.
1260 * mn10200-dis.c, mn10300-dis.c: New files.
1261 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1262 * disassemble.c: Break mn10x00 support into 10200 and 10300
1264 * configure.in: Likewise.
1265 * configure: Rebuilt.
1267 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1269 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1271 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1273 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1275 * disassemble (ARCH_mn10x00): Define.
1276 (disassembler): Handle bfd_arch_mn10x00.
1277 * configure.in: Recognize bfd_mn10x00_arch.
1278 * configure: Rebuilt.
1280 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1282 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1283 accordingly. Don't declare functions using op_rtn.
1285 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1287 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1288 params to be more standard.
1289 * (disassemble): Print absolute addresses and symbolic names for
1290 branch and jump targets.
1291 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1293 * (v850_opcodes): Add breakpoint insn.
1295 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1297 * m68k-opc.c: Move the fmovemx data register cases before the
1298 other cases, so that they get recognized before the data register
1299 does gets treated as a degenerate register list.
1301 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1303 * mips-opc.c: Add a case for "div" and "divu" with two registers
1304 and a destination of $0.
1306 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1308 * mips-dis.c (print_insn_arg): Add prototype.
1309 (_print_insn_mips): Ditto.
1311 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1313 * mips-dis.c (print_insn_arg): Print condition code registers as
1316 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1318 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1320 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1322 * v850-dis.c (disassemble): Make static. Provide prototype.
1324 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1326 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1329 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1331 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1332 ']' characters into the output stream.
1333 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1334 Add "memop" field to all opcodes (for the disassembler).
1335 Reorder opcodes so that "nop" comes before "mov" and "jr"
1336 comes before "jarl".
1338 * v850-dis.c (print_insn_v850): Fix typo in last change.
1340 * v850-dis.c (print_insn_v850): Properly handle disassembling
1341 a two byte insn at the end of a memory region when the memory
1342 region's size is only two byte aligned.
1344 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1346 * v850-dis.c (v850_reg_names): Define.
1347 (v850_sreg_names, v850_cc_names): Likewise.
1348 (disassemble): Very rough cut at printing operands (unformatted).
1350 * v850-opc.c (BOP_MASK): Fix.
1351 (v850_opcodes): Fix mask for jarl and jr.
1353 * v850-dis.c: New file. Skeleton for disassembler support.
1354 * Makefile.in Remove v850 references, they're not needed here
1355 and they weren't being sanitized away.
1356 * configure.in: Add v850-dis.o when building v850 toolchains.
1357 * configure: Rebuilt.
1358 * disassemble.c (disassembler): Call v850 disassembler.
1360 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1361 (insert_d8_6, extract_d8_6): New functions.
1362 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1363 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1365 (IF4A, IF4B): Use "D7" instead of "D7S".
1366 (IF4C, IF4D): Use "D8_7" instead of "D8".
1367 (IF4E, IF4F): New. Use "D8_6".
1368 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1369 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1371 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1372 (v850_operands): Change D16 to D16_15, use special insert/extract
1373 routines. New new D16 that uses the generic insert/extract code.
1374 (IF7A, IF7B): Use D16_15.
1375 (IF7C, IF7D): New. Use D16.
1376 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1378 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1379 message. Issue an error if the branch offset is odd.
1381 * v850-opc.c: Add notes about needing special insert/extract
1382 for all the load/store insns, except "ld.b" and "st.b".
1384 * v850-opc.c (insert_d22, extract_d22): New functions.
1385 (v850_operands): Use insert_d22 and extract_d22 for
1387 (insert_d9): Fix range check.
1389 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1391 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1392 and set bits field to D9 and D22 operands.
1394 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1396 * v850-opc.c (v850_operands): Define SR2 operand.
1397 (v850_opcodes): "ldsr" uses R1,SR2.
1399 * v850-opc.c (v850_opcodes): Fix opcode specs for
1400 sld.w, sst.b, sst.h, sst.w, and nop.
1402 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1404 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1405 end of the opcode table.
1407 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1409 * d10v-opc.c (pre_defined_registers): Added register pairs,
1410 "r0-r1", "r2-r3", etc.
1412 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1414 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1415 Create I16U for an unsigned 16bit mmediate operand.
1416 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1418 * v850-opc.c (v850_operands): Define EP operand.
1419 (IF4A, IF4B, IF4C, IF4D): Use EP.
1421 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1422 with immediate operand, "movhi". Tweak "ldsr".
1424 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1425 correct. Get sld.[bhw] and sst.[bhw] closer.
1427 * v850-opc.c (v850_operands): "not" is a two byte insn
1429 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1431 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1433 * v850-opc.c (two): Get order of words correct.
1435 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1437 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1438 register source and destination operands.
1439 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1441 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1442 same thinko in "trap" opcode.
1444 * v850-opc.c (v850_opcodes): Add initializer for size field
1447 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1448 Add D8 for 8-bit unsigned field in short load/store insns.
1449 (IF4A, IF4D): These both need two registers.
1450 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1451 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1452 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1453 for "ldsr" and "stsr".
1454 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1457 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1458 short store word (sst.w).
1460 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1462 * v850-opc.c (v850_operands): Added insert and extract fields,
1463 pointers to functions that handle unusual operand encodings.
1465 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1467 * v850-opc.c (v850_opcodes): Enable "trap".
1469 * v850-opc.c (v850_opcodes): Fix order of displacement
1470 and register for "set1", "clr1", "not1", and "tst1".
1472 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1474 * v850-opc.c (v850_operands): Add "B3" support.
1475 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1478 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1480 * v850-opc.c: Close unterminated comment.
1482 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1484 * v850-opc.c (v850_operands): Add flags field.
1485 (v850_opcodes): add move opcodes.
1487 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1489 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1490 * configure: (bfd_v850v_arch) Add new case.
1491 * configure.in: (bfd_v850_arch) Add new case.
1492 * v850-opc.c: New file.
1494 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1496 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1498 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1500 * d10v-opc.c: Add additional information to the opcode
1501 table to help determinine which instructions can be done
1504 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1506 * mpw-make.sed: Update editing of include pathnames to be
1509 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1511 * arm-opc.h: Added "bx" instruction definition.
1513 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1515 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1517 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1519 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1521 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1523 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1525 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1527 * makefile.vms: Update for alpha-opc changes.
1529 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1531 * i386-dis.c (print_insn_i386): Actually return the correct value.
1532 (ONE, OP_ONE): #ifdef out; not used.
1534 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1536 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1537 Changed subi operand type to treat 0 as 16.
1539 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1541 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1544 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1546 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1547 memory transfer instructions. Add new format string entries %h and %s.
1548 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1551 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1553 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1554 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1556 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1558 * alpha-dis.c (print_insn_alpha_osf): Remove.
1559 (print_insn_alpha_vms): Remove.
1560 (print_insn_alpha): Make globally visible. Chose the register
1561 names based on info->flavour.
1562 * disassemble.c: Always return print_insn_alpha for the alpha.
1564 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1566 * d10v-dis.c (dis_long): Handle unknown opcodes.
1568 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1570 * d10v-opc.c: Changes to support signed and unsigned numbers.
1571 All instructions with the same name that have long and short forms
1572 now end in ".l" or ".s". Divs added.
1573 * d10v-dis.c: Changes to support signed and unsigned numbers.
1575 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1577 * d10v-dis.c: Change all functions to use info->print_address_func.
1579 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1581 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1582 move ccr/sr insns more strict so that the disassembler only
1583 selects them when the addressing mode is data register.
1585 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1586 * d10v-opc.c (pre_defined_registers): Declare.
1587 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1588 to pick a better name for the registers.
1590 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1592 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1593 operands for fexpand and fpmerge. From Christian Kuehnke
1594 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1596 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1598 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1599 print routine. Take new regnames and cpumask arguments.
1600 Kill the environment variable nonsense.
1601 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1602 (print_insn_alpha_vms): New function. Do VMS style regnames.
1603 * disassemble.c (disassembler): Test bfd flavour to pick
1604 between OSF and VMS routines. Default to OSF.
1606 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1608 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1609 * configure: Rebuild.
1610 * Makefile.in (install): Use @INSTALL_SHLIB@.
1612 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1614 * configure: (bfd_d10v_arch) Add new case.
1615 * configure.in: (bfd_d10v_arch) Add new case.
1616 * d10v-dis.c: New file.
1617 * d10v-opc.c: New file.
1618 * disassemble.c (disassembler) Add entry for d10v.
1620 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1622 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1623 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1625 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1627 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1628 distinguish between variants of the instruction set.
1629 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1630 distinguish between variants of the instruction set.
1632 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1634 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1635 the 8086 instruction set.
1636 * i386-dis.c: General cleanups. Make most things static. Add
1637 prototypes. Get rid of static variables aflags and dflags. Pass
1638 them as args (to almost everything).
1640 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1642 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1644 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1646 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1647 if the next arg is marked with SRC_IN_DST. Gross.
1649 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1650 we're looking for and find EXR.
1652 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1653 if we're looking for KBIT and we don't find it.
1655 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1658 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1659 3bit immediate operands.
1661 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1663 * Released binutils 2.7.
1665 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1666 <kkaempf@progis.ac-net.de>.
1668 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1670 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1672 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1674 * sparc-dis.c (print_insn_sparclite): New routine to print
1675 sparclite instructions.
1677 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1679 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1681 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1683 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1684 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1685 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1687 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1689 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1690 Use autoconf-set values.
1691 (docdir, oldincludedir): Removed.
1692 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1694 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1696 * alpha-opc.c: New file.
1697 * alpha-opc.h: Remove.
1698 * alpha-dis.c: Complete rewrite to use new opcode table.
1699 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1700 * configure: Rebuild with autoconf 2.10.
1701 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1702 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1704 (alpha-opc.o): New target.
1706 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1708 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1709 Set imm_added_to_rs1 even if the source and destination register
1712 * sparc-opc.c: Add some two operand forms of the wr instruction.
1714 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1716 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1719 * disassemble.c (disassembler): Handle H8/S.
1720 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1722 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1724 * sparc-opc.c: Add beq/teq as aliases for be/te.
1726 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1727 <sergei@msil.sps.mot.com>.
1729 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1731 * makefile.vms: New file.
1733 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1735 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1737 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1740 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1742 * i386-dis.c (OP_OFF): Call append_prefix.
1744 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1746 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1747 unsigned long to silence a warning from the Solaris PowerPC
1750 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1752 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1754 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1756 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1758 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1759 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1760 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1761 cpush, cpusha, cpull sparclet insns.
1763 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1765 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1767 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1769 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1770 Set F_FLOAT on other floating point instructions.
1772 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1774 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1776 (powerpc_opcodes): Add 860/821 specific SPRs.
1778 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1780 * configure.in: Permit --enable-shared to specify a list of
1781 directories. Set and substitute BFD_PICLIST.
1782 * configure: Rebuild.
1783 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1784 uses. Set to @BFD_PICLIST@.
1786 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1788 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1789 not "abs", which may be needed for the absolute in something
1790 like btst #0,@10:8. Print L_3 immediates separately from other
1791 immediates. Change ABSMOV reference to ABS8MEM.
1793 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1795 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1796 (current_arch_mask): New static global.
1797 (compute_arch_mask): New static function.
1798 (print_insn_sparc): Delete sparc_v9_p. New static local
1799 current_mach. Resort opcode table if current_mach changes.
1800 Generalize "insn not supported" test.
1801 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1802 Delete test for v9/!v9.
1803 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1805 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1806 (brfcx): Renamed to FBRX.
1807 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1808 coprocessor mnemonics are not supported on the sparclet).
1809 (condf): Renamed to CONDF.
1810 (SLCBCC2): Delete F_ALIAS flag.
1812 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1814 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1815 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1817 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1819 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1820 that the shared library version number is set correctly.
1822 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1824 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1825 Miles Bader <miles@gnu.ai.mit.edu>.
1826 * configure: Rebuild.
1828 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1830 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1833 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1835 * configure: Rebuild with autoconf 2.8.
1837 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1839 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1840 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1842 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1844 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1845 since they appear as targets in Makefile.in.
1846 * configure: Rebuild.
1848 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1850 * mpw-make.sed: Edit out shared library support bits.
1852 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1854 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1855 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1856 (sparc_opcodes): Add sparclet insns.
1857 (sparclet_cpreg_table): New static local.
1858 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1859 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1861 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1863 * i386-dis.c (index16): New static variable.
1864 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1866 (OP_indirE): Return result of OP_E.
1867 (OP_E): Check for 16 bit addressing mode, and disassemble
1868 correctly. Optimised 32 bit case a little. Don't print
1869 "(base,index,scale)" when sib specifies only an offset.
1871 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1873 * configure.in: Set and substitute SHLIB_DEP.
1874 * configure: Rebuild.
1875 * Makefile.in (SHLIB_DEP): New variable.
1876 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1877 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1878 COMMON_SHLIB, add them to piclist with appropriate modifications.
1879 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1880 here: just use piclist.
1882 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1884 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1885 (print_insn_sparc): Rewrite v9/not-v9 tests.
1886 (compare_opcodes): Likewise.
1887 * sparc-opc.c (MASK_<ARCH>): Define.
1888 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1889 (sparclet,v6notv9): Define.
1890 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1891 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1893 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1895 * configure.in: Call AC_PROG_CC before configure.host.
1896 * configure: Rebuild.
1898 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1900 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1902 * i386-dis.c (onebyte_has_modrm): New static array.
1903 (twobyte_has_modrm): New static array.
1904 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1906 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1908 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1911 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1913 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1916 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1918 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1919 m68010up, not just m68020up | cpu32.
1921 * Makefile.in (SONAME): New variable.
1922 ($(SHLINK)): Make a link to the transformed name, as well.
1923 (stamp-tshlink): New target.
1924 (install): Skip stamp-tshlink during install.
1926 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1928 * configure.in: Call AC_ARG_PROGRAM.
1929 * configure: Rebuild.
1930 * Makefile.in (program_transform_name): New variable.
1931 (install): Transform library name before installing it.
1933 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1935 * i960-dis.c (mem): Add HX dcinva instruction.
1937 Support for building as a shared library, based on patches from
1938 Alan Modra <alan@spri.levels.unisa.edu.au>:
1939 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1940 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1941 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1942 * configure: Rebuild.
1943 * Makefile.in (ALLLIBS): New variable.
1944 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1945 (COMMON_SHLIB, SHLINK): New variables.
1946 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1947 (STAGESTUFF): Remove variable.
1948 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1949 (stamp-piclist, piclist): New targets.
1950 ($(SHLIB), $(SHLINK)): New targets.
1951 ($(OFILES)): Depend upon stamp-picdir.
1952 (disassemble.o): Build twice if PICFLAG is set.
1953 (MOSTLYCLEAN): Add pic/*.o.
1954 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1955 (distclean): Remove pic and stamp-picdir.
1956 (install): Install shared libraries.
1957 (stamp-picdir): New target.
1959 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1961 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1962 Print unknown instruction as "unknown", rather than in hex.
1964 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1966 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1968 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1970 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1972 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1974 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1975 when necessary. From Ulrich Drepper
1976 <drepper@myware.rz.uni-karlsruhe.de>.
1978 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1980 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1981 sparc_num_opcodes. Update architecture enum values.
1982 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1983 (sparc_opcode_lookup_arch): New function.
1984 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1985 (sparc_opcodes): Add v9a shutdown insn.
1987 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1989 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1990 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1992 (print_insn_sparc64): Deleted.
1993 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1996 * sparc-opc.c (architecture_pname): Add v9a.
1998 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2000 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2001 incorrectly defined as 0x16 when it should be 0x15.
2002 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2003 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2004 excb (exception barrier) which is defined in the Alpha
2005 Architecture Handbook version 2.
2006 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2007 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2008 disassembled as or, for example.
2010 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2012 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2013 (_print_insn_mips): Change i from int to unsigned int.
2015 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2017 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2018 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2020 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2022 * i386-dis.c: Added Pentium Pro instructions.
2024 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2026 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2029 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2031 * sh-opc.h (sh_nibble_type): Added REG_B.
2032 (sh_arg_type): Added A_REG_B.
2033 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2035 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2037 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2039 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2041 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2043 * Makefile.in (distclean): Remove stamp-h. From Ronald
2044 F. Guilmette <rfg@monkeys.com>.
2046 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2048 From David Mosberger-Tang <davidm@azstarnet.com>:
2049 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2052 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2054 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2055 (sh_table): Added many SH3 opcodes.
2056 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2058 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2060 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2061 (subco,subco.): Mark this PPC, not PPCCOM.
2063 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2065 * configure: Rebuild with autoconf 2.7.
2067 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2069 * configure: Rebuild with autoconf 2.6.
2071 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2073 * configure.in: Sort list of architectures. Accept but do nothing
2074 for alliant, convex, pyramid, romp, and tahoe.
2076 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2078 * a29k-dis.c (print_special): Change num to unsigned int.
2080 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2082 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2085 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2087 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2088 * configure: Rebuilt.
2090 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2092 * configure.in: Add case for bfd_i860_arch.
2093 * configure: Rebuild.
2095 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2097 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2098 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2099 (NEXTDOUBLE): Likewise.
2100 (print_insn_m68k): Don't match fmoveml if there is more than one
2101 register in the list.
2102 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2104 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2106 * m68k-opc.c: Use #W rather than #w.
2107 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2109 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2111 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2112 and likewise for all the dbxx opcodes.
2114 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2116 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2118 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2120 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2121 the VR4100 specific instructions to the mips_opcodes structure.
2123 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2125 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2126 ugly Metrowerks bug in CW6, is fixed in CW7.
2128 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2130 * ppc-opc.c (whole file): Add flags for common/any support.
2132 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2134 * Makefile.in (BISON): Remove macro.
2135 (FLAGS_TO_PASS): Remove BISON.
2137 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2139 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2141 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2142 instructions that take no args by looking at the match mask.
2143 (print_insn_arg): Always print "%" before register names.
2144 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2145 [case '_']: Don't print "@#" before address.
2146 [case 'J']: Use "%s" as format string, not register name.
2147 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2149 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2151 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2154 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2156 From David Mosberger-Tang <davidm@azstarnet.com>
2158 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2159 (alpha_insn_set): added definitions for VAX floating point
2160 instructions (Unix compilers don't generate these, but handcoded
2161 assembly might still use them).
2163 * alpha-dis.c (print_insn_alpha): added support for disassembling
2164 the miscellaneous instructions in the Alpha instruction set.
2166 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2168 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2169 no longer create sysdep.h, sed ppc-opc.c to work around a
2170 serious Metrowerks C bug.
2171 * mpw-make.in: Remove.
2172 * mpw-make.sed: New file, used by mpw-configure to edit
2173 Makefile.in into an MPW makefile.
2175 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2177 * Makefile.in (maintainer-clean): New synonym for realclean.
2179 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2181 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2182 which use '0', '1', and '2' instead. Specify the proper size for
2183 a pmove immediate operand. Correct the pmovefd patterns to be
2184 moves to a register, not from a register.
2185 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2187 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2189 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2190 %psr, %wim, %tbr as F_NOTV9.
2192 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2194 * Makefile.in (Makefile): Just rebuild Makefile when running
2196 (config.h, stamp-h): New targets.
2197 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2198 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2199 rebuilding config.h.
2200 * configure: Rebuild.
2202 * mips-opc.c: Change unaligned loads and stores with "t,A"
2203 operands to use "t,A(b)".
2205 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2207 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2209 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2211 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2212 until 3 instead of until 2.
2214 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2216 * Makefile.in (ALL_CFLAGS): Define.
2217 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2218 (MOSTLYCLEAN): Add config.log.
2219 (distclean): Don't remove config.log.
2220 * configure.in: Substitute HDEFINES.
2221 * configure: Rebuild.
2223 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2225 * sh-opc.h (sh_arg_type): Add F_FR0.
2226 (sh_table, case fmac): Add F_FR0 as first argument.
2228 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2230 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2232 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2234 * sparc-dis.c: Remove all references to NO_V9.
2236 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2238 * aclocal.m4: Just include ../bfd/aclocal.m4.
2239 * configure: Rebuild.
2241 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2243 * sparc-dis.c (X_DISP19): Define.
2244 (print_insn, case 'G'): Use it.
2245 (print_insn, case 'L'): Sign extend displacement.
2247 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2249 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2250 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2251 host_makefile_frag or frags.
2252 * aclocal.m4: New file.
2253 * configure: Rebuild.
2254 * Makefile.in (INSTALL): Set to @INSTALL@.
2255 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2256 (INSTALL_DATA): Set to @INSTALL_DATA@.
2258 (AR_FLAGS): Set to rc rather than qc.
2259 (CC): Define as @CC@.
2260 (CFLAGS): Set to @CFLAGS@.
2261 (@host_makefile_frag@): Remove.
2262 (config.status): Remove dependency upon @frags@.
2264 * configure.in: ../bfd/config.bfd now just sets shell variables.
2265 Use them rather than looking through target Makefile fragments.
2266 * configure: Rebuild.
2268 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2270 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2272 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2274 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2275 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2278 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2279 (lookup_{name,value}): New functions.
2280 (prefetch_table): New static local.
2281 (sparc_{encode,decode}_prefetch): New functions.
2282 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2284 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2286 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2289 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2291 * sh-dis.c: Correct comment on first line of file.
2293 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2295 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2297 * sparc-opc.c (asi, membar): New static locals.
2298 (sparc_{encode,decode}_{asi,membar}): New functions.
2299 (sparc_opcodes, membar insn): Fix.
2300 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2301 Support decoding of membar masks.
2304 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2306 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2308 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2310 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2311 and likewise for the other branches. Add bhs as an alias for bcc,
2312 and likewise for the size variants. Add dbhs as an alias for
2315 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2317 * sh-opc.h (FP sts instructions): Update to match reality.
2319 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2321 * m68k-dis.c: (fpcr_names): Add % before all register names.
2322 (reg_names): Likewise.
2323 (print_insn_arg): Don't explicitly print % before register names.
2324 Add % before register names in static array names. In case 'r',
2325 print data registers as `@(Dn)', not `Dn@'. When printing a
2326 memory address, don't print @# before it.
2327 (print_indexed): Change base_disp and outer_disp from int to
2328 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2329 syntax. Sign extend 8 byte displacement correctly.
2330 (print_base): Print using MIT syntax. Print zpc when appropriate.
2331 Change parameter disp from int to bfd_vma.
2333 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2336 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2338 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2339 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2340 * sh-opc.h (sh_arg_type): Add new operand types.
2341 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2343 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2345 * Makefile.in (distclean): Remove generated file config.h.
2347 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2349 * Makefile.in (distclean): Remove generated file config.h.
2351 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2353 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2355 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2357 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2358 rather than numopcodes. Use m68k_opcodes rather than removed
2359 opcode function. Don't check F_ALIAS.
2360 (print_insn_arg): Change first parameter to be const char *.
2361 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2362 (m68k-opc.o): New target.
2363 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2364 * configure: Rebuild.
2366 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2368 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2369 (opcode_bits, opcode_hash_table): New variables.
2370 (opcodes_initialized): Renamed from opcodes_sorted.
2371 (build_hash_table): New function.
2372 (is_delayed_branch): Use hash table.
2373 (print_insn): Renamed from print_insn_sparc, made static.
2374 Build and use hash table. If !sparc64, ignore sparc64 insns,
2375 and vice-versa if sparc64.
2376 (print_insn_sparc, print_insn_sparc64): New functions.
2377 (compare_opcodes): Move sparc64 opcodes to end.
2378 Print commutative insns with constant second.
2379 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2381 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2383 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2384 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2385 avoids printing a delay slot in a delay slot.
2386 * sh-opc.h (sh_table): Fully bracket last entry.
2388 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2390 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2392 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2394 * configure.in: Get host_makefile_frag from ${srcdir}.
2396 * configure.in: Autoconfiscated. Check for string[s].h. Create
2397 config.h from config.in. Don't set up sysdep.h link.
2398 * sysdep.h: New file.
2399 * configure, config.in: New files, generated from configure.in.
2400 * Makefile.in: Updated to be processed autoconf-style.
2401 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2402 (Makefile): Depend on config.status.
2403 (config.status): New rule.
2404 * configure.bat: Update Makefile substitutions.
2406 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2408 * mips-opc.c (L1): Define.
2409 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2410 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2413 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2415 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2416 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2417 have multiple add units but only a single logical unit.
2419 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2420 shifted by 18, without any insertion or extraction function.
2421 (insert_cr, extract_cr): Remove.
2423 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2425 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2428 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2430 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2431 * sh-opc.h: Add copyright.
2433 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2435 * Makefile.in (crunch-m68k): Delete extra target accidentally
2436 checked in a while ago.
2438 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2440 * sh-opc.h (sh_table): Add SH3 support.
2442 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2444 * sh-opc.h: Added bsrf and braf.
2446 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2448 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2449 bogus [ls]fm{ea,fd} patterns.
2451 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2452 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2453 initialize it from memory. Make function static.
2454 (print_insn_{big,little}_arm): New functions.
2455 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2456 the correct endianness.
2458 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2460 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2463 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2465 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2466 17th, so that it builds again using GCC as the compiler.
2468 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2470 * mips-dis.c (print_insn_little_mips): Cast return value from
2471 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2472 expects an unsigned long, and that might be fewer words of
2473 argument storage (e.g., if bfd_vma is long long on a 32-bit
2475 (print_insn_big_mips): Likewise with bfd_getb32 value.
2476 (_print_insn_mips): Now static.
2478 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2480 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2481 gcc memory hog problem with initializer is fixed.
2483 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2485 Merge in support for Mac MPW as a host.
2486 (Old change descriptions retained for informational value.)
2488 * mpw-config.in (archname): Compute from the config.
2489 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2491 * mpw-config.in (target_arch): Compute from canonical target.
2492 (m68k, mips, powerpc, sparc): Add architectures.
2493 * mpw-make.in (disassemble.c.o): Add.
2494 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2496 * mpw-config.in (BFD_MACHINES): Set to a default value.
2497 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2499 * mpw-make.in (CSEARCH): Add extra-include to search path.
2501 * mpw-config.in (varargs.h): Don't create.
2502 (sysdep.h): Create using forward-include.
2503 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2505 * mpw-config.in: New file, MPW version of configure.in.
2506 * mpw-make.in: New file, MPW version of Makefile.in.
2508 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2510 * alpha-dis.c (print_insn_alpha): Put empty statement after
2513 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2515 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2516 (low_sign_extend): Likewise.
2517 (get_field): Delete unused function.
2518 (set_field, deposit_14, deposit_21): Likewise.
2520 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2522 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2525 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2527 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2529 * alpha-opc.h (OSF_ASMCODE): define
2530 print pal-code names as defined in App C of the
2531 Alpha Architecture Reference Manual
2533 * alpha-dis.c: cleaned up output
2534 print stylized code forms as defined in App A.4.3 of the
2535 Alpha Architecture Reference Manual
2537 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2539 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2541 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2544 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2546 * m68k-dis.c (opcode): New function. Returns address of opcode
2547 table entry given index, even if the opcode table was split to
2548 work around gcc bugs.
2549 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2551 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2552 (reg_names): Now const.
2553 (print_insn_arg): Arrays cacheFieldName and names now const.
2554 (print_indexed): Array scales now const.
2556 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2558 * ppc-opc.c: Sort recently added instructions by minor opcode
2559 number within major opcode number.
2561 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2563 * hppa-dis.c: Include libhppa.h.
2565 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2567 * mips-opc.c: Change dli to use M_DLI, and add dla.
2569 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2571 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2573 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2575 * mips-opc.c: Add r4650 mul instruction.
2577 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2579 * mips-opc.c: Add uld and usd macros for unaligned double load and
2582 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2584 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2585 mfdcr, mtdcr, icbt, iccci.
2587 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2589 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2590 signed char fields to shorts, more portable.
2592 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2594 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2595 char fields as signed chars, since they may have negative values.
2597 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2599 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2600 (mycroft@netbsd.org).
2602 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2604 From "Logg, Ed" <elogg@ea.com>:
2605 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2606 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2609 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2611 * ppc-opc.c: Changes based on patch from David Edelsohn
2612 <edelsohn@mhpcc.edu>.
2613 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2616 (insert_tbr): New static function.
2617 (extract_tbr): New static function.
2618 (XFXFXM_MASK, XFXM): Define.
2619 (XSPRBAT_MASK, XSPRG_MASK): Define.
2620 (powerpc_opcodes): Add instructions to access special registers by
2621 name. Add mtcr and mftbu.
2623 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2625 * mips-opc.c (P3): Define.
2626 (mips_opcodes): Add mad and madu.
2628 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2630 * configure.in: Add W65 support.
2631 * disassemble.c: Likewise.
2632 * w65-opc.h, w65-dis.c: New files.
2634 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2636 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2639 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2641 * mips-opc.c: Add dli as a synonym for li.
2643 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2645 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2646 print something for reserved opcode values, even if it won't
2649 * mips-dis.c (_print_insn_mips): When initializing, shift right
2650 and mask, to avoid sign extension problems on the Alpha.
2652 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2655 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2657 * sh-opc.h (mov.l gbr): Get direction right.
2658 * sh-dis.c (print_insn_shx): New function.
2659 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2660 print opcodes with right byte order.
2662 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2664 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2665 to avoid conflicts with getopt.
2667 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2669 * hppa-dis.c (print_insn_hppa): Read the instruction using
2670 bfd_getb32, so that it works on a little endian or 64 bit host.
2671 Remove unused local variable op.
2673 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2675 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2676 addu does not work correctly if -mips3.
2678 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2680 * a29k-dis.c (print_special): Add special register names defined
2681 on 29030, 29040 and 29050.
2682 (print_insn): Handle new operand type 'I'.
2684 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2686 * Makefile.in (INSTALL): Use top level install.sh script.
2688 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2690 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2691 that it works on a little endian host.
2693 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2695 * configure.in: Use ${config_shell} when running config.bfd.
2697 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2699 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2701 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2703 * a29k-dis.c (print_insn): Print the opcode.
2705 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2707 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2709 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2711 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2713 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2715 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2716 which store a value into memory.
2718 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2720 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2721 * arm-dis.c, arm-opc.h: New files.
2723 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2725 * Makefile.in (ns32k-dis.o): Add dependency.
2726 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2727 string, not as array of chars.
2729 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2731 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2733 * sparc-opc.c: Added sparclite extended FP operations, and
2734 versions of v9 impdep* instructions permitting specification of
2737 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2739 * i960-dis.c (reg_names): Now const.
2740 (struct sparse_tabent): New type, copied from array type in mem
2742 (ctrl): Local static array ctrl_tab now const.
2743 (cobr): Local static array cobr_tab now const.
2744 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2745 static variable mem_tab no longer explicitly initialized. Changed
2746 mem_init to const array of struct sparse_tabent.
2747 (reg): Local static variable reg_tab no longer explicitly
2748 initialized. Changed reg_init to const array of struct
2750 (ea): Local static array scale_tab now const.
2752 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2755 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2757 * configure.bat: the disassember needs to be enabled for
2758 "objdump -d" to work in djgpp.
2760 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2762 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2763 (invalid_float): Enabled general version, doesn't require running
2764 on ns32k host. Changed to take char* argument, and test for
2765 explicitly specified sizes, instead of using sizeof() on host CPU
2767 (INVALID_FLOAT): Cast first argument.
2768 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2769 list_P032, list_M032): Now const.
2770 (optlist, list_search): Made appropriate arguments now point to
2772 (print_insn_arg): Changed static array of one-character-string
2773 pointers into a static const array of characters; fixed sprintf
2774 statement accordingly.
2776 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2778 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2779 from distribution. A ns32k-dis.c from a previous distribution has
2780 been brought up to date and supports the new interface.
2782 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2784 * configure.in: add bfd_ns32k_arch target support.
2786 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2787 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2789 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2791 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2794 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2796 * h8300-dis.c, mips-dis.c: Don't use true and false.
2798 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2800 * configure.in: Change --with-targets to --enable-targets.
2802 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2804 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2805 opcodes to the first instruction with that opcode, to speed
2806 disassembly of large files. From ralphc@pyramid.com (Ralph
2809 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2811 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2813 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2815 * configure.bat: update to latest makefile.in
2817 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2819 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2820 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2821 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2822 slot insn is in a delay slot.
2823 * z8k-opc.h: (resflg): Fix patterns.
2824 * h8500-opc.h Fix CR insn patterns.
2826 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2828 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2829 "cmpl" before POWER versions, so that gas -many uses them.
2831 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2833 * disassemble.c: New file.
2834 * Makefile.in (OFILES): Add disassemble.o.
2835 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2836 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2837 binutils/configure.in.
2839 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2840 opcode being examined.
2842 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2844 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2845 (insert_ral, insert_ram, insert_ras): New functions.
2846 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2847 RAS for store with update.
2849 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2851 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2852 (edelsohn@npac.syr.edu).
2854 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2856 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2859 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2861 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2863 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2865 * ppc-opc.c (powerpc_operands): The signedp field has been
2866 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2867 instead. Add new operand SISIGNOPT.
2868 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2869 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2870 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2873 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2875 * i386-dis.c (struct private): Renamed to dis_private. `private'
2876 is a reserved word for dynix cc.
2878 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2880 * configure.in: Change error message to refer to bfd/config.bfd
2881 rather than bfd/configure.in.
2883 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2885 * ppc-opc.c: Define POWER2 as short alias flag.
2886 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2889 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2891 * i960-dis.c (print_insn_i960): Don't read a second word for
2892 opcodes 0, 1, 2 and 3.
2894 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2896 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2898 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2900 * m68881-ext.c: Removed; no longer used.
2901 * Makefile.in: Changed accordingly.
2903 * m68k-dis.c (ext_format_68881): Don't declare.
2904 (print_insn_m68k): If an instruction uses place 'i', it uses at
2905 least four fixed bytes.
2906 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2907 extended float, convert to double using floatformat_to_double, not
2908 ieee_extended_to_double, and fetch the data before converting it.
2910 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2912 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2913 davidj@ICSI.Berkeley.EDU (David Johnson).
2915 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2917 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2918 PowerPC uses bdnz[l][a].
2920 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2922 * dis-buf.c, i386-dis.c: Include sysdep.h.
2924 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2926 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2928 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2929 by Motorola PowerPC 601 with PPC_OPCODE_601.
2930 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2931 Disassemble Motorola PowerPC 601 instructions as well as normal
2932 PowerPC instructions.
2934 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2936 * i960-dis.c (reg, mem): Just use a static array instead of
2939 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2941 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2942 condition name index if this is for a negated condition.
2944 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2945 Floating point format for 'H' operand is backwards from normal
2946 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2947 operands (fmpyadd and fmpysub), handle bizarre register
2948 translation correctly for single precision format.
2950 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2951 or 'I' operands if the next format specifier is 'M' (fcmp
2952 condition completer).
2954 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2956 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2957 single number giving a bitmask for the MB and ME fields of an M
2958 form instruction. Change NB to accept 32, and turn it into 0;
2959 also turn 0 into 32 when disassembling. Seperated SH from NB.
2960 (insert_mbe, extract_mbe): New functions.
2961 (insert_nb, extract_nb): New functions.
2962 (SC_MASK): Mask out SA and LK bits.
2963 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2964 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2965 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2966 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2967 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2968 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2969 (powerpc_macros): Define table of macro definitions.
2970 (powerpc_num_macros): Define.
2972 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2973 if PPC_OPERAND_NEXT is set.
2975 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2977 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2978 char. Retrieve contents using bfd_getl32 instead of shifting.
2980 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2982 * ppc-opc.c: New file. Opcode table for PowerPC, including
2983 opcodes for POWER (RS/6000).
2984 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2985 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2986 (CFILES): Add ppc-dis.c.
2987 (ppc-dis.o, ppc-opc.o): New targets.
2988 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2990 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2992 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2993 No space before 'u', 'f', or 'N'.
2995 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2997 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2998 farther than we should.
3000 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3002 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3004 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3006 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3008 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3009 needs it, to prevent reading past the end of a section.
3011 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3013 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3014 Removed t,A case for la; always use t,A(b) case.
3016 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3018 From Ted Lemen <mellon@pepper.ncd.com>
3019 * mips-dis.c (print_insn_arg): Handle 'k'.
3020 * mips-opc.c: Make cache use k, not t.
3022 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3024 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3025 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3026 FLOAT_FORMAT_CODE to put out floating point register names.
3028 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3030 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3032 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3034 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3036 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3038 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3039 larger than 32. Moved dsxx32 variants first for disassembler.
3041 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3043 * z8kgen.c, z8k-opc.h: Add full lda information.
3045 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3047 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3048 movb instructions. Any necessary space will be emitted by
3049 the code to handle nullification completers.
3051 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3053 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3055 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3057 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3058 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3060 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3062 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3064 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3066 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3067 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3069 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3071 * m88k-dis.c (m88kdis): comment change. Remove space after
3073 (printop): handle new arg types DEC and XREG for m88110.
3075 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3077 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3078 type for absolute branch addresses. Delete special
3079 "ble" and "be" code in 'W' operand code.
3081 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3083 * mips-opc.c: Set hazard information correctly for branch
3084 likely instructions.
3086 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3088 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3089 info->fprintf_func for printing and info->print_address_func for
3092 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3094 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3096 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3098 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3099 Corrected second case of "b" for disassembler.
3101 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3103 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3104 to BFD swapping routines to correspond to BFD name changes.
3106 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3108 * mips-opc.c: Change div machine instruction to be z,s,t rather
3109 than s,t. Change div macro to be d,v,t rather than d,s,t.
3110 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3111 rem and remu which generates only the corresponding div
3112 instruction. This is for compatibility with the MIPS assembler,
3113 which only generates the simple machine instruction when an
3114 explicit destination of $0 is used.
3115 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3117 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3119 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3120 WR_31 hazard for bal, bgezal, bltzal.
3122 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3124 * hppa-dis.c (print_insn_hppa): Use print function
3125 from within the disassemble_info, not fprintf_filtered.
3127 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3129 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3130 Law, law@cs.utah.edu.)
3132 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3134 * mips-opc.c ("absu"): Removed.
3137 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3139 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3140 Changed hazard information to distinguish between memory load
3141 delays and coprocessor load delays.
3143 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3145 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3147 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3149 * configure.in: Don't pass cpu to config.bfd.
3151 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3153 * m88k-dis.c (m88kdis): Make class unsigned.
3155 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3157 * alpha-dis.c (print_insn_alpha): One branch format case was
3158 missing the instruction name.
3160 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3162 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3163 Add the arch-specific auxiliary files.
3164 (OFILES): Remove the arch-specific auxiliary files
3165 and use BFD_MACHINES instead of DIS_LIBS.
3166 * configure.in: Set BFD_MACHINES based on --with-targets option.
3168 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3170 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3173 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3175 * sparc-opc.c: Change CONST to const to deal with gcc
3176 -Dconst=__const -traditional.
3178 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3180 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3181 coprocessor instructions out of #if 0, and made them use new
3184 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3186 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3188 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3190 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3191 instruction, for use by the disassembler.
3193 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3194 hand-coded sign extensions that depended on 32-bit host ints.
3195 FIXME, we still depend on big-endian host bitfield ordering.
3196 (sparc_print_insn): Set the insn_info_valid field, and the
3197 other fields that describe the instruction being printed.
3199 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3201 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3202 `jmp' instead of just one of them.
3204 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3206 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3207 (fput_fp_reg_r): Renamed from fput_reg_r.
3208 (fput_fp_reg): New function.
3209 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3211 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3213 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3215 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3217 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3219 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3220 don't output a space.
3222 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3224 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3226 * mips-opc.c: New file, containing opcode table from
3227 ../include/opcode/mips.h.
3228 * Makefile.in: Add it.
3230 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3232 * m88k-dis.c: New file, moved in from gdb and changed to use the
3233 new dis-asm.h disassembler interface.
3234 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3235 (m88k-dis.o): New target.
3237 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3239 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3240 argument string const char * to correspond to opcode/mips.h.
3242 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3244 * mips-dis.c: Updated to account for name changes in new version
3246 * Makefile.in: Added header file dependencies.
3248 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3250 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3252 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3254 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3255 extend, rather than shifts.
3257 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3259 * Makefile.in: Undo 15 June change.
3261 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3263 * m68k-dis.c (print_insn_arg): Change return value to byte count
3265 * m68k-dis.c: Re-write to detect invalid operands before
3266 printing anything, so we can handle this the same way we
3267 handle invalid opcodes.
3269 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3271 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3273 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3275 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3278 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3280 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3282 * configure.in: Do make sysdep.h link.
3283 * Makefile.in: Search ../include. Don't search ../bfd.
3285 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3287 Changes from Jeff Law, law@cs.utah.edu:
3288 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3289 Do not print a space before the completers specified by
3292 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3294 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3295 defined, since gdb has been fixed.
3297 Changes from Jeff Law, law@cs.utah.edu:
3298 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3299 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3300 be a *disassemble_info, not a *FILE.
3301 * hppa-dis.c: Support 'd', '!', and 'a'.
3302 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3303 * hppa-dis.c: Delete cases which are no longer needed.
3305 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3307 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3309 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3311 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3314 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3316 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3317 * configure.in: No longer need to configure to get sysdep.h.
3319 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3321 * Patches from Jeffrey Law <law@cs.utah.edu>.
3322 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3323 templates for 1.1 FP computational instructions.
3325 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3327 * h8500-dis.c (print_insn_h8500): Address argument is type
3329 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3332 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3333 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3335 * sparc-dis.c (compare_opcodes): Move static declaration to
3338 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3340 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3341 instruction, remove unimp hack from 'l' argument.
3343 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3345 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3348 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3350 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3351 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3354 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3356 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3357 arrays of string pointers to 2-d arrays of chars, to save
3360 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3362 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3363 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3365 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3367 * hppa-dis.c: New file from Utah, adapted to new disassembler
3369 * Makefile.in: Include it.
3371 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3373 * sh-dis.c, sh-opc.h: New files.
3375 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3377 * alpha-dis.c, alpha-opc.h: New files.
3379 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3381 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3384 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3386 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3388 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3390 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3393 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3395 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3396 and double percent signs a few places.
3398 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3400 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3401 Use info->print_address_func not print_address.
3403 * dis-buf.c (generic_print_address): New function.
3405 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3407 * Makefile.in: Add sparc-dis.c.
3408 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3410 Add `add' instruction to the set that get checked
3411 for a preceding `sethi' in order to print an absolute address.
3412 * (print_insn): Disassembly prefers real instructions.
3413 (is_delayed_branch): Speed up.
3414 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3415 Still missing some float ops, and needs testing.
3416 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3417 F_ALIAS. Use printf, not fprintf, when not passing a file
3419 (compare_opcodes): Check that identical instructions have
3420 identical opcodes, complain otherwise.
3423 * Include reg_names.
3425 Use dis-asm.h/read_memory_func interface.
3427 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3429 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3430 deliberately return non-zero to setjmp from longjmp. Otherwise
3431 this code fails to compile.
3433 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3435 * m68k-dis.c: Fix prototype for fetch_arg().
3437 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3439 * dis-buf.c: New file, for new read_memory_func interface.
3440 Makefile.in (OFILES): Include it.
3441 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3442 Use new read_memory_func interface.
3444 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3446 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3447 * h8500-opc.h: Fix couple of opcodes.
3449 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3451 * Makefile.in: add dvi & installcheck targets
3453 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3455 * Makefile.in: Update for h8500-dis.c.
3457 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3459 * h8500-dis.c, h8500-opc.h: New files
3461 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3463 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3464 ../include/dis-asm.h.
3465 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3466 and ../gdb/m68k-pinsn.c).
3467 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3468 and ../gdb/i386-pinsn.c).
3469 * m68881-ext.c: New file. Moved definition of
3470 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3471 * Makefile.in: Adjust for new files.
3472 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3473 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3474 can be dis-assembled.
3476 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3478 * mips-dis.c (print_insn_arg): Now returns void.
3480 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3482 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3483 files that use the macros.
3485 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3487 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3488 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3489 (CFILES): Added mips-dis.c.
3491 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3493 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3494 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3496 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3498 * Makefile.in: Improve *clean rules.
3499 * configure.in: Allow a default host.
3501 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3503 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3504 files include other sysdep files
3506 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3508 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3510 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3512 * configure.in: For host support, use ../bfd/configure.host
3513 so it stays in sync with the ../bfd/hosts database.
3515 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3517 * configure.in: use cpu-vendor-os triple instead of nested cases
3519 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3521 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3522 *always* the wrong one.
3524 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3526 * z8kgen.c: added copyright info
3528 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3530 * z8k-dis.c (unparse_instr): prettier tabs
3531 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3533 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3535 * configure.in: Add ncr* configuration.
3536 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3537 picayune ANSI compilers happy.
3539 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3541 * configure.in (i386): Make i386 and i486 synonymous for now.
3542 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3544 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3546 * Makefile.in (install): Fix typo.
3548 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3550 * Makefile.in (make): Remove obsolete crud.
3551 (sparc-opc.o): Avoid Sun Make VPATH bug.
3553 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3555 * Makefile.in: since there are no SUBDIRS, remove rule and
3556 references of subdir_do.
3558 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3560 * Makefile.in (install): Get the library name right here too.
3561 Don't install bfd.h, since it's unrelated to this library. No
3562 subdirs to recurse into, either.
3563 (CFILES): The source file has a .c suffix, not .o.
3565 * sparc-opc.c: New file, moved from BFD.
3566 * Makefile.in (OFILES): Build it.
3568 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3570 * z8k-dis.c: fixed forward refferences of some declarations.
3572 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3574 * Makefile.in: get the name of the library right
3576 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3578 * z8k-dis.c: knows how to disassemble z8k stuff
3579 * z8k-opc.h: new file full of z8000 opcodes
3583 version-control: never
projects / platform / upstream / binutils.git / blob