1 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
3 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
4 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
6 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
8 Fix problems when bfd_vma is wider than long.
9 * i386-dis.c: Make op_address and start_pc unsigned.
10 (set_op): Make parameter unsigned.
11 (print_insn_x86): Cast to bfd_vma when passing a value to
13 * ns32k-dis.c (CORE_ADDR): Don't define.
14 (print_insn_ns32k): Change type of addr to bfd_vma. Use
15 bfd_scan_vma to read back address.
16 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
18 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
19 (NEXTULONG): New definition.
20 (print_insn_m68k): Avoid overflow when computing third argument of
22 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
23 Use disp instead of val to store offset values.
24 (print_indexed): Use base_disp instead of word to store base
25 displacement, to avoid overflow.
26 * m10300-dis.c (disassemble): Cast value to long when computing
27 pc-relative address, to get correct sign extension.
29 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
31 * m32r-opc.c: Regenerate.
33 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
35 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
36 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
38 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
40 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
42 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
44 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
46 (OP_DSreg): Rename from OP_DSSI.
47 (OP_ESreg): Rename from OP_ESDI.
48 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
50 (append_seg): Rename from append_prefix.
51 (ptr_reg): New function.
52 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
54 (PREFIX_ADDR): Rename from PREFIX_ADR.
55 (float_reg): Add non-broken opcodes for people who don't want
58 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
60 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
63 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
65 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
67 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
69 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
70 0; produce error message for shifts of size 32 (or 64 for 64-bit
71 shifts), because the hardware doesn't support them.
74 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
76 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
79 * vu0.h (sqc2): Fix opcode.
81 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
86 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
88 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
89 Change pinfo to use WR_HILO.
93 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
95 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
96 LONG_2, LONG_2b formats to use this new operand.
99 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
101 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
103 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
105 * sparc-dis.c (print_insn_sparc): big endian instruction / little
109 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
111 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
112 and SHORT_B3b formats to use Rb instead of Ra.
114 Add FLAG_MUL16 to MUL2XH opcode.
116 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
117 to existing 1.1.1 parallelisation prohibition procedure.
120 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
122 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
123 * cgen-dis.in (extract_normal): Likewise.
124 * m32r-asm.c,m32r-dis.c: Regenerate.
127 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
129 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
133 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
135 * mips-opc.c (multu1): Add two operand variant for the r5900.
138 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
140 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
141 with a shift count of 0.
144 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
146 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
148 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
150 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
151 (_print_insn_mips): Likewise.
152 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
156 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
158 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
159 (cgen_hw_lookup_by_num): New function.
162 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
165 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
167 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
169 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
171 * sparc-dis.c (print_insn_sparc): Always fetch instructions
172 as big-endian on SPARClite.
175 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
177 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
179 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
184 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
186 * d30v-opc.c (pre_defined_register): Remove alias for r0.
190 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
192 * mips-opc.c (break): Added 20-bit single-operand break
193 instruction for R5900 only.
196 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
198 * po/Make-in (install-info): New target.
200 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
202 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
203 * configure: Rebuild.
205 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
207 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
208 variety of ISA2 instructions to set bottom ten bits of trap code.
210 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
212 * Makefile.am (config.status): Add explicit target so that
213 config.status depends upon bfd/configure.in.
214 * Makefile.in: Rebuild.
216 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
218 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
219 instructions to set bottom ten bits of break code.
220 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
221 for above optional argument.
223 start-sanitize-cygnus
224 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
226 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
227 * m32r-opc.h: Regenerate.
230 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
232 * makefile.vms: Run dec c with /nodebug.
234 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
236 * Makefile.in: Rebuilt.
237 * Makefile.am: Regenerated dependencies with mkdep.
239 * opintl.h (_): Define as dgettext.
241 start-sanitize-cygnus
242 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
244 * configure.in: Add support for --enable-cgen-maint.
245 * Makefile.am (M32R_DEPS): New variable.
246 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
247 * aclocal.m4: Regenerate.
248 * Makefile.in: Regenerate.
249 * configure: Regenerate.
251 * Makefile.am (CGENFILES): Add minsn.scm.
254 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
256 * cgen-asm.c: Internationalised.
257 start-sanitize-cygnus
258 * cgen-asm.in: Internationalised.
259 * cgen-opc.in: Internationalised.
261 * m32r-asm.c: Internationalised.
262 * m32r-dis.c: Internationalised.
263 * m32r-opc.c: Internationalised.
265 * aclocal.m4: Regenerated.
266 * configure: Regenerated.
267 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
268 * Makefile.in: Rebuild.
269 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
270 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
272 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
274 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
276 * aclocal.m4, configure: Rebuild with current tools.
278 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
280 * opintl.h: New file - contains internationalisation macros used
281 by source files in this directory.
282 * po/: New subdirectory - contains internationalisation files.
283 * po/Make-in: New file - Makefile constructor.
284 * po/POTFILES.in: New file - list of files in opcodes directory
285 that should be scan for internationalisation macros.
286 * po/opcodes.pot: New file - list of internationisation strings
287 found in files mentioned in po/POTFILES.in.
288 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
289 entry. Add intl directory to include paths.
290 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
291 HAVE_STRCPY, HAVE_LC_MESSAGES
292 * configure.in: Add rule to build Makefile in po subdirectory.
293 * Makefile.in: Rebuilt.
294 * aclocal.m4: Rebuilt.
295 * config.in: Rebuilt.
296 * configure: Rebuilt.
297 * alpha-opc.c: Internationalised.
298 * arc-dis.c: Internationalised.
299 * arc-opc.c: Internationalised.
300 * arm-dis.c: Internationalised.
301 * cgen-asm.c: Internationalised.
303 * d30v-dis.c: Internationalised.
305 * dis-buf.c: Internationalised.
307 * dvp-dis.c: Internationalised.
308 * dvp-opc.c: Internationalised.
310 * h8300-dis.c: Internationalised.
311 * h8500-dis.c: Internationalised.
312 * i386-dis.c: Internationalised.
313 * m10200-dis.c: Internationalised.
314 * m10300-dis.c: Internationalised.
315 * m68k-dis.c: Internationalised.
316 * m88k-dis.c: Internationalised.
317 * mips-dis.c: Internationalised.
318 * ns32k-dis.c: Internationalised.
319 * opintl.h: Internationalised.
320 * ppc-opc.c: Internationalised.
321 * sparc-dis.c: Internationalised.
322 * v850-dis.c: Internationalised.
323 * v850-opc.c: Internationalised.
325 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
327 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
328 (asm_hash_table_entries): New variable.
329 (cgen_asm_init): Free asm_hash_table_entries.
330 (hash_insn_array,hash_insn_list): New functions.
331 (build_asm_hash_table): Use them. Hash macro insns as well.
332 (cgen_asm_lookup_insn): Update.
333 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
334 (dis_hash_table_entries): New variable.
335 (cgen_dis_init): Free dis_hash_table_entries.
336 (hash_insn_array,hash_insn_list): New functions.
337 (build_dis_hash_table): Use them. Hash macro insns as well.
338 (cgen_dis_lookup_insn): Update.
339 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
340 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
341 (cgen_macro_insn_count): New function.
342 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
343 All callers updated. Sanity check result of extract fn.
344 (@arch@_cgen_get_insn_operands): Change result type to void.
345 Delete args insn_value, length. New arg fields. All callers updated.
346 (@arch@_cgen_lookup_get_insn_operands): New function.
347 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
349 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
351 * i386-dis.c (OP_DSSI): Print segment override.
354 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
356 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
360 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
362 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
366 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
368 * vu0.h (vlqd, vlqi): Update per revised specs.
372 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
374 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
375 (vif_operands): Update.
376 (vif_get_unpackloc): Delete.
377 (state_vif_unpackloc{,_star_p}): Delete.
378 (dvp_opcode_init_parse): Update.
379 (vif_unpack_len_value): Avoid divide by zero.
383 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
385 * vu0.h: Specs changed for VCALLMSR bit pattern.
386 * mips-dis.c: (print_insn_arg) Matching change.
389 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
391 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
394 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
396 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
397 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
398 * configure.in: Define and substitute WIN32LDFLAGS and
400 * aclocal.m4: Rebuild with new libtool.
401 * configure, Makefile.in: Rebuild.
404 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
406 * vu0.h: Corrected bit pattern for VMAXI opcode.
409 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
411 * m32r-opc.c: Regenerate.
414 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
416 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
417 (dvp_expand_macro): Implement.
418 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
419 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
422 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
424 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
425 before trying to copy it.
426 * Makefile.in: Rebuild.
428 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
430 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
433 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
435 * m32r-opc.c: Fix bit patterns for SAT and SATB.
438 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
440 * ns32k-dis.c (bit_extract_simple): New function to extract bits
441 from an arbitrary valid buffer instead of fetching them on demand
443 (invalid_float): use bit_extract_simple() instead of bit_extract().
446 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
448 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
449 * m32r-opc.h: Add extra control registers.
452 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
454 From H.J. Lu <hjl@gnu.org>:
455 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
458 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
460 * Branched binutils 2.9.
463 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
465 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
466 disassembling last 4 bytes of a section.
469 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
471 Fix some gcc -Wall warnings:
472 * arc-dis.c (print_insn): Add casts to avoid warnings.
473 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
474 * d10v-dis.c (dis_long, dis_2_short): Likewise.
476 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
477 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
478 (parse_bc, parse_vfreg, parse_accdest): Likewise.
479 (parse_ffstreg, parse_vif_mode): Likewise.
481 * m10200-dis.c (disassemble): Likewise.
482 * m10300-dis.c (disassemble): Likewise.
483 * ns32k-dis.c (print_insn_ns32k): Likewise.
484 * ppc-opc.c (insert_ral, insert_ram): Likewise.
485 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
486 * cgen-opc.c (cgen_keyword_search_next): Likewise.
487 * d10v-dis.c (dis_long, dis_2_short): Likewise.
489 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
492 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
493 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
494 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
496 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
498 * tic80-dis.c (print_one_instruction): Likewise.
500 * w65-dis.c (print_operand): Likewise.
501 * z8k-dis.c (fetch_data): Likewise.
502 * a29k-dis.c: Add return type for find_byte_func_type.
503 * arc-opc.c: Include <stdio.h>. Remove declarations of
504 insert_multshift and extract_multshift.
506 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
508 (extract_value): Fully parenthesize expression.
511 * dvp-opc.c: Include <ctype.h>.
512 (print_sdest): Add default case to switch.
514 * h8500-dis.c (print_insn_h8500): Initialize local variables.
515 * h8500-opc.h (h8500_table): Fully bracket initializer.
516 * w65-opc.h (optable): Likewise.
517 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
518 * i386-dis.c (OP_E): Initialize local variables.
519 * m10200-dis.c (print_insn_mn10200): Likewise.
520 * mips-dis.c (print_insn_mips16): Likewise.
521 * sh-dis.c (print_insn_shx): Likewise.
522 * v850-dis.c (print_insn_v850): Likewise.
523 * ns32k-dis.c (print_insn_arg): Declare.
524 (get_displacement, invalid_float): Declare.
525 (list_search, sign_extend, flip_bytes): Declare return type.
526 (get_displacement): Likewise.
527 (print_insn_arg): Likewise. Make d int. Fix sprintf format
529 (print_insn_ns32k): Make i unsigned.
530 (invalid_float): Make static. Declare type of val.
531 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
532 on each for iteration.
533 * tic30-dis.c (get_indirect_operand): Likewise.
534 * z8k-dis.c (print_insn_z8001): Declare return type.
535 (print_insn_z8002): Likewise.
536 (unparse_instr): Fix sprintf format strings.
538 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
540 * mips-opc.c: Add "sync.l" and "sync.p".
543 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
545 * dvp-opc.c (extract_vif_datalen): Rewrite.
546 (vif_insn_len): Perform 0->max+1 conversion for direct length.
548 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
550 * dvp-dis.c (print_insn): Print unpack address in hex.
551 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
552 Don't skip over '*', just record it.
553 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
554 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
555 Don't skip over '*', just record it.
556 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
557 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
558 (vif_opcodes): Likewise.
559 (state_vif_{mpg,unpack}loc_star_p): New static locals.
560 (vif_macros,vif_macro_count): New globals.
561 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
562 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
563 (vif_get_wl_cl): New function.
564 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
567 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
569 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
570 default m68k variant to recognize.
572 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
573 (ctrl, cobr, mem, ea): Likewise.
574 (print_addr): Likewise. Remove cast.
575 (ea): Cast argument of print_addr to bfd_vma.
577 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
579 (cgen_parse_unsigned_integer): Likewise.
580 (cgen_parse_address): Likewise.
582 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
584 * i960-dis.c (ctrl): Add full braces to structure initialization.
585 (cobr, mem, reg): Likewise.
586 (ea): Correct parenthesization in expression.
588 * cgen-asm.c: Include <ctype.h>.
589 (build_asm_hash_table): Remove unused local variable i.
590 (cgen_parse_keyword): Add casts to avoid warnings.
592 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
593 symbol. Fix indentation.
594 (print_insn_little_arm): Likewise.
597 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
599 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
604 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
606 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
611 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
613 * dvp-opc.c (vif_operand_datalen_special): New global.
617 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
619 * vu0.h (vcallms): Use 'O' for call target operand.
620 * mips-dis.c (print_insn_arg): Handle 'O'.
623 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
625 * configure.in: Use AM_DISABLE_SHARED.
626 * aclocal.m4, configure: Rebuild with libtool 1.2.
629 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
631 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
636 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
638 These patches are courtesy of Jonathan Walton and Tony Thompson
639 (athompso@cambridge.arm.com).
641 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
644 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
645 both the offset and the label closest to the destination.
648 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
650 * vu0.h: New file with cop2/vu0 instructions.
651 * mips-opc.c: Include vu0.h.
652 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
654 (print_insn_mips): Do not emit a tab after an instruction if the
655 first arg is an instruction completer (&). If the next arg is an
656 escape character (%), then print the next arg verbatim.
657 * Makefile.am (mips-opc.lo): Depend on vu0.h
661 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
663 * dvp-opc.c (vif_opcodes): Add stcycl.
665 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
667 * dvp-dis.c (print_dma): Change length from 16 to 8.
670 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
672 * m32r-opc.h: Regenerate.
675 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
677 * dvp-opc.c (print_dest1): Print dest spec again.
678 (print_vfreg,print_accdest): Likewise.
679 (vif_unpack_len): Round result up to word boundary.
682 start-sanitize-vr4320
683 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
685 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
687 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
689 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
694 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
696 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
697 (print_insn): Do mask comparison on proper opcode word.
698 Print unsigned values in hex.
699 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
700 (parse_bc): Catch missing dest.
701 (parse_vfreg): Replace atoi call with strtol.
702 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
703 (parse_bcftreg,parse_ffstreg): Handle missing dest.
704 (extract_gif_eop): New function.
705 (gif_operands): Update eop entry.
706 (VGIFOP,VGIFNREGS): Fix calcs.
707 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
708 (gif_regs): Add entry for unused 11 case.
709 (print_gif_regs): Print empty list instead of nothing.
710 (extract_gif_nloop): Fix value calc.
711 (print_gif_nloop): Always print value, even if 0.
712 (insert_vif_wlcl,extract_vif_wlcl): New functions.
713 (vif_operands): Use them for wl,cl fields.
714 (state_vif_wl,state_vif_cl): New static locals.
715 (parse_vif_mode): Handle numeric args.
716 (vif_unpack_len_value,vif_unpack_len): New functions.
717 (vif_insn_len): Call vif_unpack_len.
720 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
722 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
724 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
726 * cgen-asm.in: Move insertion of generated routines to top of file.
727 (insert_normal): Add prototype. Delete `shift' arg.
728 * cgen-dis.in: Move insertion of generated routines to top of file.
729 (extract_normal): Add prototype. Delete `shift' arg.
730 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
731 (print_keyword): Add prototype. Fix type of `attrs' arg.
733 start-sanitize-vr4320
734 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
736 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
737 * mips-opc.c ("mac","dmac") : Added 4320 insns.
740 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
742 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
743 assume that info->symbols is non-empty.
745 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
747 * alpha-opc.c (cvtqs) There is no such thing.
748 (cvttq): Missing most of the /*d variants.
751 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
753 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
755 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
756 (r5900/msub.s): Takes three operands, not four. Fix opcode.
760 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
762 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
763 delayed branches or jumps.
767 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
769 * dvp-opc.c (vif_operands): Add unpack[u] support.
770 (vif_opcodes): Ditto.
771 (*_vif_imrubits): Renamed from *_vif_imrbits.
773 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
775 * dvp-dis.c (print_insn): Handle word number.
776 Handle mips address vs vu address.
777 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
778 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
779 ({insert,extract}_dma_addr): Fix word ofset.
780 ({insert,print}_gif_regs): Fix encode/decode.
783 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
785 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
787 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
788 * tic30-dis.c (print_branch): Likewise.
790 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
791 * dvp-dis.c (dvp_info_mach_type): New function.
792 (print_insn_dvp): Call it.
793 (print_vif): Return length of 4 if mpg or direct insn so following
794 insns get properly disabled.
795 (print_gif): Fix word order.
796 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
797 (gif_operands): Fix word order.
798 (gif_opcodes): Likewise.
799 ({insert,extract,print}_gif_regs): Likewise.
800 (gif_regs): Add new register number/name changes.
801 (dma_opcodes): Add dmarefe insn.
804 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
806 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
807 saved_symbol code as it is no longer needed.
809 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
811 * cgen-asm.c: Include symcat.h.
812 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
814 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
817 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
819 * dvp-opc.c (extra_dma_flags): Fix typos.
820 (dma_operands): Fix word numbers.
821 (dma_opcodes): Likewise.
822 ({insert,extract}_dma_flags): Likewise.
825 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
827 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
830 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
832 * dvp-dis.c (print_gif): Complete.
833 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
834 (state_gif_{nregs,regs,nloop}): New static locals.
836 (dvp_opcode_init_{parse,print}): Init gif state locals.
837 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
838 (vif_insn_len): Handle `unpack'.
839 ({insert,extract}_dma_flags): Complete.
843 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
845 * mips-opc.c (mula.s): Renamed from multa.s.
848 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
850 * m32r-opc.[ch]: Regenerate.
853 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
855 * dvp-opc.c (dma_operands): Rewrite.
856 (dma_operand_{count,addr}): New globals.
857 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
858 (insert_dma_addr): Insert value into insn.
859 (extract_dma_addr): Extract value from insn.
861 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
863 * dvp-dis.c (print_vu): Handle loi insns.
864 (print_insn): Likewise.
865 * dvp-opc.c (vu_lower_opcodes): Add "loi".
866 (vu_operands): Make LDEST1 a FAKE operand.
867 (parse_dest1): Allow elided argument.
868 (print_dest1): Don't print the argument.
870 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
872 * dvp-opc.c (parse_vfreg): Dest spec is optional.
873 (print_vfreg): Don't print dest spec.
874 (parse_accdest): Dest spec is optional.
875 (print_accdest): Don't print dest spec.
878 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
880 * Makefile.am (CGENFILES): Update.
881 * Makefile.in: Regenerate.
882 * cgen-asm.in (insert_normal): Result is error message now.
883 Validate value to be inserted.
884 (insert_insn_normal): Result is error message now.
885 (@arch@_cgen_assemble_insn): Update.
886 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
887 arguments. Don't perform validation here.
888 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
890 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
892 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
893 operand instance list.
894 * m32r-opc.c: Regenerate.
896 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
898 * Makefile.am (AUTOMAKE_OPTIONS): Define.
899 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
901 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
903 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
905 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
907 * configure.in: Get the version number from BFD.
908 * configure: Rebuild.
910 From H.J. Lu <hjl@gnu.org>:
911 * Makefile.am (libopcodes_la_LDFLAGS): Define.
912 * Makefile.in: Rebuild.
914 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
916 * m32r-opc.c: Regenerate.
917 * m32r-opc.h: Regenerate.
919 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
921 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
922 Ignore ALIAS insns if asked to.
923 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
924 * m32r-opc.c: Regenerate.
927 * dvp.opc.c: Nicely format opcode tables.
928 (vu_operands): New element UFLAGS.
929 (parse_uflags,print_uflags): New functions.
930 (vu_upper_opcodes): Add UFLAGS to all insns.
933 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
935 Fix rac to accept only a0:
936 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
937 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
938 Introduce OPERAND_GPR.
939 * d10v-dis.c (print_operand): Likewise.
941 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
943 * cgen-opc.in: New file.
944 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
945 * Makefile.am (CGENFILES): Add cgen-opc.in.
946 * Makefile.in: Regenerate.
948 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
949 (cgen_hw_lookup): Make result const.
951 * cgen-dis.in (*): Use PTR instead of void *.
952 (print_insn): Delete unused vars `i', `syntax'.
954 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
957 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
959 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
960 (vif_opcodes): Update renamed insns.
961 * dvp-dis.c (*): Likewise.
964 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
966 * configure, aclocal.m4: Rebuild with new libtool.
969 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
971 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
972 instructions use a PC relative branch, not absolute.
975 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
977 * configure.in: Set libtool_enable_shared rather than
978 libtool_shared. Remove diversion hack.
979 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
981 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
983 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
984 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
986 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
988 * tic30-dis.c: New file.
989 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
990 * configure.in: Handle bfd_tic30_arch.
991 * Makefile.am: Rebuild dependencies.
992 (CFILES): Add tic30-dis.c
993 (ALL_MACHINES): Add tic30-dis.lo.
994 * configure, Makefile.in: Rebuild.
997 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
999 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1000 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1001 macwhi-a and macwlo-a instructions.
1005 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1007 * dvp-opc.c, fixed encoding of a bunch of instructions to
1008 be consistent with the asmvu assembler (and inconsistent
1009 with the specification).
1011 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1013 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1014 in the opcode table. The pkemscalf instruction must come first.
1016 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1018 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1021 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1023 * m32r-opc.h (HAVE_CPU_M32R): Define.
1026 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1028 * dvp-dis.c, dvp-opc.c: New files.
1029 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1030 * configure: Regenerate.
1031 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1032 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1033 (mips-dis.lo): Compile with @archdefs@.
1034 * Makefile.in: Regenerate.
1035 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1036 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1039 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1041 * v850-opc.c (insertion routines): If both alignment and size is
1042 wrong then report this.
1044 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1046 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1047 Only recognize instructions for the current target_processor.
1049 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1051 * d10v-dis.c (PC_MASK): Correct value.
1052 (print_operand): If there's a reloc, don't calculate the
1053 address because they could be in different sections.
1055 start-sanitize-cygnus
1056 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1058 * cgen.sh: Rewrite to be like simulator's version.
1059 * Makefile.am (cgen): Update call to cgen.sh.
1060 * Makefile.in: Regenerate
1063 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1065 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1066 instruction after the 4650's "mul" instruction; nobody's using the
1067 4010 these days. If object files someday indicate which processor
1068 variant they're intended for, we can do a better job at this.
1070 start-sanitize-r5900
1071 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1073 * mips-opc.c (c.lt.s): Add r5900 variant.
1077 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1079 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1080 table provided entry size. Use CGEN_INSN_MNEMONIC.
1081 (cgen_parse_keyword): Rewrite.
1082 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1083 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1084 * cgen-opc.c: Clean up pass over `struct foo' usage.
1085 (cgen_keyword_lookup_value): Handle "" entry.
1086 (cgen_keyword_add): Likewise.
1087 start-sanitize-cygnus
1088 * Makefile.am: Add cgen support.
1089 * Makefile.in: Regenerate.
1090 * configure.in: Add cgen support.
1091 * configure: Regenerate.
1092 * aclocal.m4: Regenerate.
1093 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1096 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1098 * mips-opc.c: Add FP_D to s.d instruction flags.
1100 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1102 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1104 start-sanitize-tic80
1105 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1107 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1108 PC relative offset forms before the 15 bit forms. An assembler command
1109 line option now chooses the default.
1112 start-sanitize-r5900
1113 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1115 * mips-opc.c: Add many missing r5900 instructions.
1119 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1121 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1122 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1125 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1127 * configure: Only build libopcodes shared if --enable-shared's value
1128 was `yes', or was set to `*opcodes*'.
1129 * aclocal.m4: Likewise.
1130 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1131 original source of this bit of code. It's not clear what the best fix
1134 start-sanitize-r5900
1135 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1137 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1139 start-sanitize-tic80
1140 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1142 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1143 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1144 offset forms before the 15 bit forms, to default to the long forms.
1147 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1149 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1151 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1153 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1154 symbol if none is present.
1155 (print_insn_big_arm): Prevent examination of stored symbol if
1158 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1160 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1162 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1164 * disassemble.c: Remove disasm_symaddr() function.
1166 * arm-dis.c: Use info->symbol instead of info->flags to determine
1167 if disassmbly should be in Thumb or Arm mode.
1169 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1171 * arm-dis.c: Add support for disassembling Thumb opcodes.
1172 (print_insn_thumb): New function.
1174 * disassemble.c (disasm_symaddr): New function.
1176 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1177 (thumb_opcodes): Table of Thumb opcodes.
1179 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1181 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1183 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1184 and 'v' as operand types.
1186 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1188 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1189 <olivier.carmona@di.epfl.ch>.
1190 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1191 which has a two word opcode with a one word argument.
1194 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1196 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1197 unsigned, not signed.
1198 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1201 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1203 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1204 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1205 (ftrv): Slay the cut-and-paste monster.
1207 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1209 * d10v-dis.c (print_operand):
1210 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1212 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1214 * d10v-opc.c (OPERAND_FLAG): Split into:
1215 (OPERAND_FFLAG, OPERAND_CFLAG) .
1219 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1221 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1222 field for all INSN_MACRO's.
1223 * mips16-opc.c: same
1225 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1227 * mips-opc.c (sync,cache): These are 3900 insns.
1229 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1231 sh-opc.h (sh_table): Remove ftst/nan.
1233 start-sanitize-vr5400
1234 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1236 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1237 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1239 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1243 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1245 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1246 Add tx49 insns and configury.
1249 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1251 * mips-opc.c (ffc, ffs): Fix mask.
1254 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1256 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1260 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1262 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1263 start-sanitize-vr5400
1264 Added VR5400 instructions.
1265 (N5): New cpu-id macro.
1267 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1269 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1271 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1272 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1274 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1276 * v850-dis.c (disassemble): Replace // with /* ... */
1278 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1280 * sparc-opc.c: Add wr & rd for v9a asr's.
1281 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1282 (v9a_asr_reg_names): New variable.
1283 Patch from David Miller <davem@vger.rutgers.edu>.
1285 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1287 * sparc-opc.c (v9notv9a): New insn type.
1288 (IMPDEP): Move to the end to not conflict with edge8 et al.
1289 Patch from David Miller <davem@vger.rutgers.edu>.
1291 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1293 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1295 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1297 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1299 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1301 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1302 of disassemble_info structure to determine if an overlay address
1303 has a matching symbol in low memory.
1305 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1306 new symbol_at_address_func field in disassemble_info structure.
1308 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1310 * v850-opc.c (extract_d22): Use signed arithmatic.
1312 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1314 * mips-opc.c: Three op mult is not an ISA insn.
1316 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1318 * mips-opc.c: Fix formatting.
1320 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1322 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1323 than assuming that char is signed. Explicitly sign extend 16 bit
1324 values, rather than assuming that short is 16 bits.
1325 (OP_sI, OP_J, OP_DIR): Likewise.
1327 start-sanitize-v850e
1328 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1330 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1334 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1336 * v850-opc.c: Fix typo in comment.
1338 * v850-dis.c (disassemble): Add test of processor type when
1339 determining opcodes.
1341 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1343 * configure.in: Use a diversion to set enable_shared before the
1344 arguments are parsed.
1345 * configure: Rebuild.
1347 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1349 * m68k-opc.c (TBL1): Use ! rather than `.
1350 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1352 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1354 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1356 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1358 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1361 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1362 * aclocal.m4: Rebuild with new libtool.
1363 * configure: Rebuild.
1365 start-sanitize-v850e
1366 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1368 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1371 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1373 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1375 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1377 * v850-opc.c (v850_opcodes): Further rearrangements.
1380 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1382 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1385 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1387 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1390 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1392 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1394 * mips16-opc.c: Added mips16 sdbbp.
1397 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1399 * v850-opc.c: Initialise processors field of v850_opcode structure.
1402 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1404 Merge changes from Martin Hunt:
1406 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1408 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1409 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1410 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1412 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1414 * d30v-dis.c (print_insn): First operand of d*i (delayed
1415 branch) instructions is relative.
1417 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1418 (d30v_operand_table): Add IMM6S3 type.
1419 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1421 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1422 and cmp instructions.
1424 * d30v-opc.c: Correct entries for repeat*, and sat*.
1425 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1426 types. Correct several formats.
1428 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1430 * d30v-opc.c (pre_defined_registers): Change control registers.
1432 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1433 SHORT_C2. Manual was incorrect.
1435 * d30v-dis.c (lookup_opcode): Return value now indicates
1436 if an opcode has a short and a long form. Used for deciding
1437 to append a ".s" or ".l".
1438 (print_insn): Append a ".s" to an instruction if it is
1439 the short form and ".l" if it is a long form. Do not append
1440 anything if the instruction has only one possible size.
1442 * d30v-opc.c: Change mulx2h to require an even register.
1443 New form: SHORT_A2; a SHORT_A form that needs an even
1444 register as the first operand.
1446 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1447 instruction was not being disassembled if there were an odd
1448 number of instructions.
1450 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1453 start-sanitize-v850e
1454 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1456 * v850-dis.c (disassemble): Improved display of register lists.
1459 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1461 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1462 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1463 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1464 fandnot1s, fandnot2s.
1466 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1468 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1470 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1472 * cgen-asm.c (cgen_parse_address): New argument resultp.
1473 All callers updated.
1474 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1476 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1478 * mn10200-dis.c (disassemble): PC relative instructions are
1479 relative to the next instruction, not the current instruction.
1481 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1483 * v850-dis.c (disassemble): Only signed extend values that are not
1484 returned by extract functions.
1485 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1487 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1489 * v850-opc.c: Update comments. Remove use of
1490 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1492 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1494 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1496 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1498 * configure: Rebuilt with latest devo autoconf for NT support.
1500 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1502 * v850-dis.c (disassemble): Use curly brace syntax for register
1505 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1506 where r0 is being used as a destination register.
1508 start-sanitize-v850e
1509 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1511 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1514 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1516 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1517 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1518 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1519 Add insns to access SGR and DBR.
1520 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1522 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1524 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1526 start-sanitize-v850e
1527 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1529 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1530 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1533 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1535 * configure (cgen_files): Add support for v850e target.
1536 * configure.in (cgen_files): Add support for v850e target.
1538 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1540 * configure (cgen_files): Add support for v850ea target.
1541 * configure.in (cgen_files): Add support for v850ea target.
1544 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1546 * configure.in (bfd_arc_arch): Add.
1547 * configure: Rebuild.
1548 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1549 * Makefile.in: Rebuild.
1550 * arc-dis.c, arc-opc.c: New files.
1551 * disassemble.c (ARCH_all): Define ARCH_arc.
1552 (disassembler): Add ARC support.
1554 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1556 start-sanitize-v850e
1557 * v850-dis.c (disassemble): Add support for v850EA instructions.
1559 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1560 (v850_opcodes): Add v850EA instructions.
1562 * v850-dis.c (disassemble): Add support for v850E instructions.
1564 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1565 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1566 insert_spe, extract_spe): New Functions.
1567 (v850_opcodes): Add v850E instructions.
1570 * v850-opc.c: Reorganised and re-layed out to improve readability
1573 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1575 * configure: Rebuild with autoconf 2.12.1.
1577 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1579 * aclocal.m4, configure: Rebuild with new automake patches.
1581 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1583 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1584 * acinclude.m4: Just include acinclude.m4 from BFD.
1585 * aclocal.m4, configure: Rebuild.
1587 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1589 * Makefile.am: New file, based on old Makefile.in.
1590 * acconfig.h: New file.
1591 * acinclude.m4: New file.
1592 * stamp-h.in: New file.
1593 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1594 Removed shared library handling; now handled by libtool. Replace
1595 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1596 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1597 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1598 handling in AC_OUTPUT.
1599 * dep-in.sed: Change .o to .lo.
1600 * Makefile.in: Now built with automake.
1601 * aclocal.m4: Now built with aclocal.
1602 * config.in, configure: Rebuild.
1604 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1606 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1608 start-sanitize-r5900
1609 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1611 * mips-opc.c: Fix coding of mtsa.
1614 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1616 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1618 * sparc-dis.c (sorted_opcodes): New static local.
1619 (struct opcode_hash): `opcode' is pointer to const element.
1620 (build_hash): First arg is now table of sorted pointers.
1621 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1622 (compare_opcodes): Update.
1624 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1626 * cgen-opc.c: #include <ctype.h>.
1627 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1628 Handle case insensitive hashing.
1629 (hash_keyword_value): Change type of `value' to unsigned int.
1631 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1633 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1634 precision FP, mark it as such. Likewise for double precision
1635 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1637 start-sanitize-r5900
1638 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1641 start-sanitize-r5900
1642 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1644 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1645 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1648 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1650 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1652 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1653 nesting depth when all the macros are expanded.
1655 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1657 * sparc-opc.c: The fcmp v9a instructions take an integer register
1658 as a destination, not a floating point register. From Christian
1659 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1661 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1663 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1664 syntax. From Roman Hodek
1665 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1667 * i386-dis.c (twobyte_has_modrm): Fix pand.
1669 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1671 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1673 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1675 * arm-dis.c: Add prototypes for arm_decode_shift and
1678 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1680 * mips-opc.c: Add r3900 insns.
1682 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1684 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1685 print delay slot instructions on the same line. When using a PC
1686 relative load, add a comment with the value being loaded if it can
1689 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1691 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1692 to pushS/popS for segment regs and byte constant so that
1693 pushw/popw printed when in 16 bit data mode.
1695 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1696 print cbtw, cwtd in 16 bit data mode.
1697 * i386-dis.c (putop): extra case W to support above.
1699 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1700 address size prefix in 16 bit address mode.
1702 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1704 * sh-dis.c: Reindent. Rename local variable fprintf to
1707 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1709 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1711 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1713 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1715 * mips16-opc.c (mip16_opcodes): same.
1717 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1719 * m68k-opc.c (moveb): Change $d to %d.
1721 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1723 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1724 (twobyte_has_modrm): Likewise.
1726 (OP_MMX, OP_EM, OP_MS): New static functions.
1728 * i386-dis.c: Revert patch of April 4. The output now matches
1731 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1733 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1736 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1738 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1740 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1742 * Makefile.in (install): Depend upon installdirs.
1743 (installdirs): New target.
1745 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1747 From Thomas Graichen <graichen@rzpd.de>:
1748 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1749 * configure: Rebuild.
1751 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1753 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1754 Delete string{,s}.h support.
1756 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1758 * cgen-asm.c (cgen_parse_operand_fn): New global.
1759 (cgen_parse_{{,un}signed_integer,address}): Update call to
1760 cgen_parse_operand_fn.
1761 (cgen_init_parse_operand): New function.
1762 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1763 from cgen_asm_init_parse.
1764 (m32r_cgen_assemble_insn): New operand `errmsg'.
1765 Delete call to as_bad, return error message to caller.
1766 (m32r_cgen_asm_hash_keywords): #if 0 out.
1768 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1770 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1772 [case 'J']: Fix typo in register name.
1774 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1776 * configure.in: Substitute SHLIB_LIBS.
1777 * configure: Rebuild.
1778 * Makefile.in (SHLIB_LIBS): New variable.
1779 ($(SHLIB)): Use $(SHLIB_LIBS).
1781 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1783 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1785 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1787 * disassemble.c (disassembler): Handle m32r.
1789 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1791 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1792 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1793 * Makefile.in (CFILES): Add them.
1794 (ALL_MACHINES): Add them.
1795 (dependencies): Regenerate.
1796 * configure.in (cgen_files): New variable.
1797 (bfd_m32r_arch): Add entry.
1798 * configure: Regenerate.
1800 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1802 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1803 * configure: Rebuild.
1805 * Makefile.in: Rebuild dependencies.
1807 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1809 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1812 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1814 * Branched binutils 2.8.
1816 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1818 * m10200-dis.c: Rename from mn10200-dis.c.
1819 * m10200-opc.c: Rename from mn10200-opc.c.
1820 * m10300-dis.c: Rename from mn10300-dis.c
1821 * m10300-opc.c: Rename from mn10300-opc.c.
1822 * Makefile.in: Update accordingly.
1824 * mips16-opc.c: Add mul and dmul macros.
1826 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1828 * makefile.vms: Update CFLAGS, add clean target.
1830 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1832 * mips-opc.c: Add "wait". From Ralf Baechle
1833 <ralf@gnu.ai.mit.edu>.
1835 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1836 * configure, config.in: Rebuild.
1837 * sysdep.h: Include <stdlib.h> if it exists.
1838 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1840 * Makefile.in: Rebuild dependencies.
1842 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1844 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1845 Andrew Bray <andy@madhouse.demon.co.uk>.
1847 * mips-opc.c: Add cast when setting mips_opcodes.
1849 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1851 * v850-dis.c (disassemble): Fix sign extension problem.
1852 * v850-opc.c (extract_d*): Fix sign extension problems to make
1853 disassembly calculate branch offsets correctly.
1855 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1857 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1859 * mips-opc.c: Add dctr and dctw.
1862 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1864 * d30v-dis.c (print_insn): Change the way signed constants
1867 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1869 * Makefile.in (BFD_H): New variable.
1870 (HFILES): New variable.
1871 (CFILES): Add all C files.
1872 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1873 Delete old dependencies, and build new ones.
1874 * dep-in.sed: New file.
1876 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1878 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1880 start-sanitize-coldfire
1881 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1883 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1886 end-sanitize-coldfire
1887 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1889 * mn10200-opc.c: Change "trap" to "syscall".
1890 * mn10300-opc.c: Add new "syscall" instruction.
1892 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1894 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1895 mulul insns on the coldfire.
1897 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1899 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1900 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1901 (print_insn_little_arm): Likewise.
1903 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1905 Based on patches from H.J. Lu <hjl@lucon.org>:
1906 * i386-dis.c (fetch_data): Add prototype.
1907 * m68k-dis.c (fetch_data): Add prototype.
1908 (dummy_print_address): Add prototype. Make static.
1909 * ppc-opc.c (valid_bo): Add prototype.
1910 * sparc-dis.c (build_hash_table): Add prototype.
1911 (is_delayed_branch, compute_arch_mask): Add prototypes.
1912 (print_insn_sparc): Make several local variables const.
1913 (compare_opcodes): Change arguments to const PTR. Add prototype.
1914 * sparc-opc.c (arg): Change name field to be const.
1915 (lookup_name, lookup_value): Add prototypes. Change table and
1916 name parameters to be const.
1917 (sparc_encode_asi): Change name parameter to be const.
1918 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1919 (sparc_encode_sparclet_cpreg): Likewise.
1920 (sparc_decode_asi): Change return type to be const.
1921 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1922 (sparc_decode_sparclet_cpreg): Likewise.
1924 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1926 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1927 Solaris doesn't like the combined options, and the -f is
1929 (stamp-tshlink, install): Likewise.
1931 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1933 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1936 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1938 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1940 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1942 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1945 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1947 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1949 start-sanitize-tic80
1950 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1952 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1954 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1956 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1959 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1961 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1962 floatformat_to_double to make portable.
1963 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1966 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1968 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1969 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1971 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1973 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1974 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1976 start-sanitize-tic80
1977 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1979 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1980 (OFF_SL_BR_SCALED): ... to this, and added the flag
1981 TIC80_OPERAND_BASEREL to the flags word.
1982 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1986 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1988 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1989 Change mips_opcodes from const array to a pointer,
1990 and change bfd_mips_num_opcodes from const int to int,
1991 so that we can increase the size of the mips opcodes table
1994 start-sanitize-tic80
1995 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1997 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1998 store BITNUM values in the table in one's complement form
1999 to match behavior when assembler is given a raw numeric
2000 value for a BITNUM operand.
2001 * tic80-dis.c (print_operand_bitnum): Ditto.
2005 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2007 * d30v-opc.c: Removed references to FLAG_X.
2010 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2012 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2015 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2017 * Makefile.in: Added d30v object files.
2018 * configure: (bfd_d30v_arch) Rebuilt.
2019 * configure.in: (bfd_d30v_arch) Added new case.
2020 * d30v-dis.c: New file.
2021 * d30v-opc.c: New file.
2022 * disassemble.c (disassembler) Add entry for d30v.
2025 start-sanitize-tic80
2026 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2028 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2029 representations for the floating point BITNUM values.
2031 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2033 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2034 in the table in one's complement form, as they appear in the
2036 (tic80_symbol_to_value): Use macros to access predefined
2038 (tic80_value_to_symbol): Ditto.
2039 (tic80_next_predefined_symbol): New function.
2040 * tic80-dis.c (print_operand_bitnum): Remove code that did
2041 one's complement for BITNUM values.
2044 start-sanitize-r5900
2045 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2047 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2050 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2052 * makefile.vms: Remove 8 bit characters. Update to latest
2055 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2057 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2059 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2061 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2062 (IMM24_PCREL): Likewise.
2064 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2066 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2067 address for an extended PC relative instruction that is not a
2070 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2072 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2075 start-sanitize-tic80
2076 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2078 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2079 (tic80_opcodes): Sort entries so that long immediate forms
2080 come after short immediate forms, making it easier for
2081 assembler to select the right one for a given operand.
2084 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2086 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2088 (print_insn_mips16): Likewise.
2090 start-sanitize-r5900
2091 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2093 * mips-opc.c: add r5900.
2096 start-sanitize-tic80
2097 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2099 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2100 a symbol class that restricts translation to just that
2101 class (general register, condition code, etc).
2103 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2105 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2106 and REG_DEST_E for register operands that have to be
2107 an even numbered register. Add REG_FPA for operands that
2108 are one of the floating point accumulator registers.
2109 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2110 (tic80_opcodes): Change entries that need even numbered
2111 register operands to use the new operand table entries.
2112 Add "or" entries that are identical to "or.tt" entries.
2115 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2117 * mips16-opc.c: Add new cases of exit instruction for
2119 * mips-dis.c (print_mips16_insn_arg): Display floating point
2120 registers in operands of exit instruction. Print `$' before
2121 register names in operands of entry and exit instructions.
2123 start-sanitize-tic80
2124 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2126 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2127 pairs for all predefined symbols recognized by the assembler.
2128 Also used by the disassembling routines.
2129 (tic80_symbol_to_value): New function.
2130 (tic80_value_to_symbol): New function.
2131 * tic80-dis.c (print_operand_control_register,
2132 print_operand_condition_code, print_operand_bitnum):
2133 Remove private tables and use tic80_value_to_symbol function.
2136 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2138 * d10v-dis.c (print_operand): Change address printing
2139 to correctly handle PC wrapping. Fixes PR11490.
2141 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2143 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2146 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2148 * mips-dis.c (print_insn_mips16): Set insn_info information.
2149 (print_mips16_insn_arg): Likewise.
2151 * mips-dis.c (print_insn_mips16): Better handling of an extend
2152 opcode followed by an instruction which can not be extended.
2154 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2156 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2157 coldfire moveb instruction to not allow an address register as
2158 destination. Although the documentation does not indicate that
2159 this is invalid, experiments uncovered unexpected behavior.
2160 Added a comment explaining the situation. Thanks to Andreas
2161 Schwab for pointing this out to me.
2163 start-sanitize-tic80
2164 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2166 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2167 entries are presorted so that entries with the same mnemonic are
2168 adjacent to each other in the table. Sort the entries for each
2169 instruction so that this is true.
2172 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2174 * m68k-dis.c: Include <libiberty.h>.
2175 (print_insn_m68k): Sort the opcode table on the most significant
2176 nibble of the opcode.
2178 start-sanitize-tic80
2179 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2181 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2182 "vsub", "vst", "xnor", and "xor" instructions.
2183 (V_a1): Renamed from V_a, msb of accumulator reg number.
2184 (V_a0): Add macro, lsb of accumulator reg number.
2186 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2188 * tic80-dis.c (print_insn_tic80): Broke excessively long
2189 function up into several smaller ones and arranged for
2190 the instruction printing function to be callable recursively
2191 to print vector instructions that have both a load and a
2192 math instruction packed into a single opcode.
2193 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2194 to explain why it comes after the other vector opcodes.
2197 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2199 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2200 move insns to handle immediate operands.
2202 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2204 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2205 fix operand mask in the "moveml" entries for the coldfire.
2207 start-sanitize-tic80
2208 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2210 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2211 New macros for building vector instruction opcodes.
2212 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2213 FMT_LI, which were unused. The field is now a flags field.
2214 Remove some opcodes that are possible, but illegal, such
2215 as long immediate instructions with doubles for immediate
2216 values. Add "vadd" and "vld" instructions.
2218 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2220 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2221 the order more logical. Move the shift alias instructions ("rotl",
2222 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2223 interspersed with the regular sr.x and sl.x instructions. Add
2224 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2225 "sub", "subu", "swcr", and "trap".
2227 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2229 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2230 (OFF_SL_PC): Renamed from OFF_SL.
2231 (OFF_SS_BR): New operand type for base relative operand.
2232 (OFF_SL_BR): New operand type for base relative operand.
2233 (REG_BASE): New operand type for base register operand.
2234 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2235 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2236 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2238 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2239 10 char field, padded with spaces on rhs, rather than a string
2240 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2241 than old TIC80_OPERAND_RELATIVE. Add support for new
2242 TIC80_OPERAND_BASEREL flag bit.
2244 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2246 * tic80-dis.c (print_insn_tic80): Print floating point operands
2248 * tic80-opc.c (SPFI): Add single precision floating point
2249 immediate operand type.
2250 (ROTATE): Add rotate operand type for shifts.
2251 (ENDMASK): Add for shifts.
2252 (n): Macro for the 'n' bit.
2253 (i): Macro for the 'i' bit.
2254 (PD): Macro for the 'PD' field.
2255 (P2): Macro for the 'P2' field.
2256 (P1): Macro for the 'P1' field.
2257 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2261 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2263 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2264 adding in current address for pc-relative operands.
2266 start-sanitize-tic80
2267 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2269 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2270 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2271 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2272 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2273 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2274 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2275 (REG_SCALED, LSI_SCALED): New operand types.
2276 (E): New macro for 'E' bit at bit 27.
2277 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2278 opcodes, including the various size flavors (b,h,w,d) for
2279 the direct load and store instructions.
2281 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2283 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2285 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2286 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2287 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2288 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2289 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2290 masks with "MASK_* & ~M_*" to get the M bit reset.
2291 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2293 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2295 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2296 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2297 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2299 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2300 CC, SICR, and LICR table entries.
2301 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2302 "bcnd", and "brcr" opcodes.
2305 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2307 * ppc-opc.c (powerpc_operands): Make comment match the
2308 actual fields (no shift field).
2309 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2310 start-sanitize-tic80
2311 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2312 partial implementation, work in progress.
2313 * tic80-opc.c (tic80_operands): Begin construction operands table.
2314 (tic80_opcodes): Continue populating opcodes table and start
2315 filling in the operand indices.
2316 (tic80_num_opcodes): Add this.
2319 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2321 * m68k-opc.c: Add #B case for moveq.
2323 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2325 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2326 before they are used.
2328 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2330 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2331 for "breakpoint" instruction.
2333 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2335 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2336 (dep): Use ALL_CFLAGS rather than CFLAGS.
2338 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2340 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2343 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2345 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2346 start-sanitize-tic80
2347 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2350 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2352 * mips16-opc.c: Add "abs".
2354 start-sanitize-tic80
2355 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2357 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2358 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2359 (disassembler): Add bfd_arch_tic80 support to set disassemble
2360 to print_insn_tic80.
2361 * tic80-dis.c (print_insn_tic80): Add stub.
2363 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2365 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2366 * configure: Regenerate with autoconf.
2367 * tic80-dis.c: Add file.
2368 * tic80-opc.c: Add file.
2371 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2373 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2375 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2377 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2378 (mn10200_opcodes): Use it for some logicals and btst insns.
2379 Add "break" and "trap" instructions.
2381 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2383 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2385 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2387 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2388 relative load or add now depends upon whether the instruction is
2391 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2393 * mn10200-dis.c: Finish writing disassembler.
2394 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2395 Fix mask for "jmp (an)".
2397 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2398 handle endianness issues for mn10300.
2400 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2402 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2404 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2405 instruction. Fix opcode field for "movb (imm24),dn".
2407 * mn10200-opc.c (mn10200_operands): Fix insertion position
2410 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2412 * mn10200-opc.c: Create mn10200 opcode table.
2413 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2414 but moving along nicely.
2416 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2418 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2420 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2422 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2423 specifiers for fmovem* instructions.
2425 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2427 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2429 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2431 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2434 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2436 * mn10300-opc.c: Add some comments explaining the various
2439 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2441 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2443 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2446 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2447 operand specifiers in fmovm* instructions.
2449 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2451 * ppc-opc.c (insert_li): Give an error if the offset has the two
2452 least significant bits set.
2454 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2456 * mips-dis.c (print_insn_mips16): Separate the instruction from
2457 the arguments with a tab, not a space.
2459 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2461 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2464 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2467 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2469 * configure: Rebuild with autoconf 2.12.
2471 Add support for mips16 (16 bit MIPS implementation):
2472 * mips16-opc.c: New file.
2473 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2474 (mips16_reg_names): New static array.
2475 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2476 after seeing a 16 bit symbol.
2477 (print_insn_little_mips): Likewise.
2478 (print_insn_mips16): New static function.
2479 (print_mips16_insn_arg): New static function.
2480 * mips-opc.c: Add jalx instruction.
2481 * Makefile.in (mips16-opc.o): New target.
2482 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2483 * configure: Rebuild.
2485 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2487 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2488 operand specifiers in *save, *restore and movem* instructions.
2490 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2493 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2494 register operands for immediate arithmetic, not, neg, negx, and
2495 set according to condition instructions.
2497 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2498 specifier of the effective-address operand in immediate forms of
2499 arithmetic instructions. The specifier for the immediate operand
2500 notes how and where the constant will be stored.
2502 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2504 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2507 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2510 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2512 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2514 * mn10300-dis.c (disassemble): Handle register lists.
2516 * mn10300-opc.c: Fix handling of register list operand for
2517 "call", "ret", and "rets" instructions.
2519 * mn10300-dis.c (disassemble): Print PC-relative and memory
2520 addresses symbolically if possible.
2521 * mn10300-opc.c: Distinguish between absolute memory addresses,
2522 pc-relative offsets & random immediates.
2524 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2526 (disassemble): Handle SPLIT and EXTENDED operands.
2528 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2530 * mn10300-dis.c: Rough cut at printing some operands.
2532 * mn10300-dis.c: Start working on disassembler support.
2533 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2535 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2537 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2539 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2541 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2543 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2545 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2546 register argument is calls and jmp instructions.
2548 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2550 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2551 getx operand. Fix opcode for mulqu imm,dn.
2553 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2555 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2556 in MN10300_OPERAND_SPLIT operands for how many bits
2557 appear in the basic insn word. Add IMM32_HIGH24,
2558 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2559 (mn10300_opcodes): Use new operands as needed.
2561 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2562 for bset, bclr, btst instructions.
2563 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2565 * mn10300-opc.c (mn10300_operands): Remove many redundant
2566 operands. Update opcode table as appropriate.
2567 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2568 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2570 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2572 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2573 operands (for indexed load/stores). Fix bitpos for DI
2574 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2575 few instructions that insert immediates/displacements in the
2576 middle of the instruction. Add IMM8E for 8 bit immediate in
2577 the extended part of an instruction.
2578 (mn10300_operands): Use new opcodes as appropriate.
2580 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2582 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2583 sequential so the assembler never parallelizes it with
2586 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2588 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2589 a data/address register that appears in register field 0
2590 and register field 1.
2591 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2593 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2595 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2596 standard disassembly.
2598 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2599 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2600 Recategorize PALcode instructions.
2602 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2604 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2606 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2608 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2609 there are no operand types.
2611 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2613 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2615 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2617 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2619 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2621 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2623 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2624 and sst.w instructions.
2626 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2629 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2631 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2634 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2636 * ppc-opc.c (PPCPWR2): Define.
2637 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2640 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2642 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2643 field for movhu instruction.
2645 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2646 cast value to "long" not "signed long" to keep hpux10
2649 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2651 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2654 * mn10300-opc.c (FMT*): Remove definitions.
2656 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2657 for shift-by-register opcodes.
2659 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2660 into [AD][MN][01] for encoding the position of the register
2663 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2665 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2666 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2668 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2670 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2671 Fix various typos. Add "PAREN" operand.
2672 (MEM, MEM2): Define.
2673 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2674 operands. Fix several typos.
2676 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2679 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2681 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2682 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2684 (mn10300_opcodes): Break opcode format out into its own field.
2685 Update many operand fields to deal with signed vs unsigned
2686 issues. Fix one or two typos in the "mov" instruction
2687 opcode, mask and/or operand fields.
2689 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2691 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2692 m68851 wasn't reset.
2694 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2696 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2697 all opcodes. Very rough cut at operands for all opcodes.
2699 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2702 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2704 * mn10200-opc.c, mn10300-opc.c: New files.
2705 * mn10200-dis.c, mn10300-dis.c: New files.
2706 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2707 * disassemble.c: Break mn10x00 support into 10200 and 10300
2709 * configure.in: Likewise.
2710 * configure: Rebuilt.
2712 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2714 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2716 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2718 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2720 * disassemble (ARCH_mn10x00): Define.
2721 (disassembler): Handle bfd_arch_mn10x00.
2722 * configure.in: Recognize bfd_mn10x00_arch.
2723 * configure: Rebuilt.
2725 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2727 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2728 accordingly. Don't declare functions using op_rtn.
2730 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2732 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2733 params to be more standard.
2734 * (disassemble): Print absolute addresses and symbolic names for
2735 branch and jump targets.
2736 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2738 * (v850_opcodes): Add breakpoint insn.
2740 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2742 * m68k-opc.c: Move the fmovemx data register cases before the
2743 other cases, so that they get recognized before the data register
2744 does gets treated as a degenerate register list.
2746 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2748 * mips-opc.c: Add a case for "div" and "divu" with two registers
2749 and a destination of $0.
2751 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2753 * mips-dis.c (print_insn_arg): Add prototype.
2754 (_print_insn_mips): Ditto.
2756 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2758 * mips-dis.c (print_insn_arg): Print condition code registers as
2761 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2763 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2765 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2767 * v850-dis.c (disassemble): Make static. Provide prototype.
2769 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2771 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2774 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2776 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2777 ']' characters into the output stream.
2778 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2779 Add "memop" field to all opcodes (for the disassembler).
2780 Reorder opcodes so that "nop" comes before "mov" and "jr"
2781 comes before "jarl".
2783 * v850-dis.c (print_insn_v850): Fix typo in last change.
2785 * v850-dis.c (print_insn_v850): Properly handle disassembling
2786 a two byte insn at the end of a memory region when the memory
2787 region's size is only two byte aligned.
2789 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2791 * v850-dis.c (v850_reg_names): Define.
2792 (v850_sreg_names, v850_cc_names): Likewise.
2793 (disassemble): Very rough cut at printing operands (unformatted).
2795 * v850-opc.c (BOP_MASK): Fix.
2796 (v850_opcodes): Fix mask for jarl and jr.
2798 * v850-dis.c: New file. Skeleton for disassembler support.
2799 * Makefile.in Remove v850 references, they're not needed here.
2800 * configure.in: Add v850-dis.o when building v850 toolchains.
2801 * configure: Rebuilt.
2802 * disassemble.c (disassembler): Call v850 disassembler.
2804 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2805 (insert_d8_6, extract_d8_6): New functions.
2806 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2807 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2809 (IF4A, IF4B): Use "D7" instead of "D7S".
2810 (IF4C, IF4D): Use "D8_7" instead of "D8".
2811 (IF4E, IF4F): New. Use "D8_6".
2812 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2813 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2815 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2816 (v850_operands): Change D16 to D16_15, use special insert/extract
2817 routines. New new D16 that uses the generic insert/extract code.
2818 (IF7A, IF7B): Use D16_15.
2819 (IF7C, IF7D): New. Use D16.
2820 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2822 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2823 message. Issue an error if the branch offset is odd.
2825 * v850-opc.c: Add notes about needing special insert/extract
2826 for all the load/store insns, except "ld.b" and "st.b".
2828 * v850-opc.c (insert_d22, extract_d22): New functions.
2829 (v850_operands): Use insert_d22 and extract_d22 for
2831 (insert_d9): Fix range check.
2833 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2835 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2836 and set bits field to D9 and D22 operands.
2838 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2840 * v850-opc.c (v850_operands): Define SR2 operand.
2841 (v850_opcodes): "ldsr" uses R1,SR2.
2843 * v850-opc.c (v850_opcodes): Fix opcode specs for
2844 sld.w, sst.b, sst.h, sst.w, and nop.
2846 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2848 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2849 end of the opcode table.
2851 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2853 * d10v-opc.c (pre_defined_registers): Added register pairs,
2854 "r0-r1", "r2-r3", etc.
2856 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2858 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2859 Create I16U for an unsigned 16bit mmediate operand.
2860 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2862 * v850-opc.c (v850_operands): Define EP operand.
2863 (IF4A, IF4B, IF4C, IF4D): Use EP.
2865 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2866 with immediate operand, "movhi". Tweak "ldsr".
2868 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2869 correct. Get sld.[bhw] and sst.[bhw] closer.
2871 * v850-opc.c (v850_operands): "not" is a two byte insn
2873 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2875 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2877 * v850-opc.c (two): Get order of words correct.
2879 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2881 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2882 register source and destination operands.
2883 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2885 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2886 same thinko in "trap" opcode.
2888 * v850-opc.c (v850_opcodes): Add initializer for size field
2891 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2892 Add D8 for 8-bit unsigned field in short load/store insns.
2893 (IF4A, IF4D): These both need two registers.
2894 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2895 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2896 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2897 for "ldsr" and "stsr".
2898 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2901 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2902 short store word (sst.w).
2904 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2906 * v850-opc.c (v850_operands): Added insert and extract fields,
2907 pointers to functions that handle unusual operand encodings.
2909 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2911 * v850-opc.c (v850_opcodes): Enable "trap".
2913 * v850-opc.c (v850_opcodes): Fix order of displacement
2914 and register for "set1", "clr1", "not1", and "tst1".
2916 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2918 * v850-opc.c (v850_operands): Add "B3" support.
2919 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2922 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2924 * v850-opc.c: Close unterminated comment.
2926 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2928 * v850-opc.c (v850_operands): Add flags field.
2929 (v850_opcodes): add move opcodes.
2931 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2933 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2934 * configure: (bfd_v850v_arch) Add new case.
2935 * configure.in: (bfd_v850_arch) Add new case.
2936 * v850-opc.c: New file.
2938 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2940 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2942 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2944 * d10v-opc.c: Add additional information to the opcode
2945 table to help determinine which instructions can be done
2948 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2950 * mpw-make.sed: Update editing of include pathnames to be
2953 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2955 * arm-opc.h: Added "bx" instruction definition.
2957 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2959 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2961 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2963 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2965 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2967 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2969 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2971 * makefile.vms: Update for alpha-opc changes.
2973 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2975 * i386-dis.c (print_insn_i386): Actually return the correct value.
2976 (ONE, OP_ONE): #ifdef out; not used.
2978 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2980 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2981 Changed subi operand type to treat 0 as 16.
2983 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2985 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2988 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2990 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2991 memory transfer instructions. Add new format string entries %h and %s.
2992 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2995 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2997 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2998 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3000 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3002 * alpha-dis.c (print_insn_alpha_osf): Remove.
3003 (print_insn_alpha_vms): Remove.
3004 (print_insn_alpha): Make globally visible. Chose the register
3005 names based on info->flavour.
3006 * disassemble.c: Always return print_insn_alpha for the alpha.
3008 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3010 * d10v-dis.c (dis_long): Handle unknown opcodes.
3012 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3014 * d10v-opc.c: Changes to support signed and unsigned numbers.
3015 All instructions with the same name that have long and short forms
3016 now end in ".l" or ".s". Divs added.
3017 * d10v-dis.c: Changes to support signed and unsigned numbers.
3019 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3021 * d10v-dis.c: Change all functions to use info->print_address_func.
3023 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3025 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3026 move ccr/sr insns more strict so that the disassembler only
3027 selects them when the addressing mode is data register.
3029 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3030 * d10v-opc.c (pre_defined_registers): Declare.
3031 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3032 to pick a better name for the registers.
3034 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3036 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3037 operands for fexpand and fpmerge. From Christian Kuehnke
3038 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3040 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3042 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3043 print routine. Take new regnames and cpumask arguments.
3044 Kill the environment variable nonsense.
3045 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3046 (print_insn_alpha_vms): New function. Do VMS style regnames.
3047 * disassemble.c (disassembler): Test bfd flavour to pick
3048 between OSF and VMS routines. Default to OSF.
3050 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3052 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3053 * configure: Rebuild.
3054 * Makefile.in (install): Use @INSTALL_SHLIB@.
3056 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3058 * configure: (bfd_d10v_arch) Add new case.
3059 * configure.in: (bfd_d10v_arch) Add new case.
3060 * d10v-dis.c: New file.
3061 * d10v-opc.c: New file.
3062 * disassemble.c (disassembler) Add entry for d10v.
3064 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3066 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3067 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3069 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3071 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3072 distinguish between variants of the instruction set.
3073 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3074 distinguish between variants of the instruction set.
3076 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3078 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3079 the 8086 instruction set.
3080 * i386-dis.c: General cleanups. Make most things static. Add
3081 prototypes. Get rid of static variables aflags and dflags. Pass
3082 them as args (to almost everything).
3084 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3086 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3088 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3090 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3091 if the next arg is marked with SRC_IN_DST. Gross.
3093 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3094 we're looking for and find EXR.
3096 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3097 if we're looking for KBIT and we don't find it.
3099 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3102 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3103 3bit immediate operands.
3105 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3107 * Released binutils 2.7.
3109 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3110 <kkaempf@progis.ac-net.de>.
3112 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3114 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3116 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3118 * sparc-dis.c (print_insn_sparclite): New routine to print
3119 sparclite instructions.
3121 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3123 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3125 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3127 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3128 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3129 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3131 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3133 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3134 Use autoconf-set values.
3135 (docdir, oldincludedir): Removed.
3136 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3138 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3140 * alpha-opc.c: New file.
3141 * alpha-opc.h: Remove.
3142 * alpha-dis.c: Complete rewrite to use new opcode table.
3143 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3144 * configure: Rebuild with autoconf 2.10.
3145 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3146 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3148 (alpha-opc.o): New target.
3150 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3152 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3153 Set imm_added_to_rs1 even if the source and destination register
3156 * sparc-opc.c: Add some two operand forms of the wr instruction.
3158 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3160 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3163 * disassemble.c (disassembler): Handle H8/S.
3164 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3166 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3168 * sparc-opc.c: Add beq/teq as aliases for be/te.
3170 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3171 <sergei@msil.sps.mot.com>.
3173 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3175 * makefile.vms: New file.
3177 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3179 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3181 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3184 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3186 * i386-dis.c (OP_OFF): Call append_prefix.
3188 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3190 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3191 unsigned long to silence a warning from the Solaris PowerPC
3194 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3196 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3198 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3200 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3202 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3203 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3204 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3205 cpush, cpusha, cpull sparclet insns.
3207 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3209 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3211 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3213 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3214 Set F_FLOAT on other floating point instructions.
3216 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3218 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3220 (powerpc_opcodes): Add 860/821 specific SPRs.
3222 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3224 * configure.in: Permit --enable-shared to specify a list of
3225 directories. Set and substitute BFD_PICLIST.
3226 * configure: Rebuild.
3227 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3228 uses. Set to @BFD_PICLIST@.
3230 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3232 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3233 not "abs", which may be needed for the absolute in something
3234 like btst #0,@10:8. Print L_3 immediates separately from other
3235 immediates. Change ABSMOV reference to ABS8MEM.
3237 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3239 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3240 (current_arch_mask): New static global.
3241 (compute_arch_mask): New static function.
3242 (print_insn_sparc): Delete sparc_v9_p. New static local
3243 current_mach. Resort opcode table if current_mach changes.
3244 Generalize "insn not supported" test.
3245 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3246 Delete test for v9/!v9.
3247 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3249 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3250 (brfcx): Renamed to FBRX.
3251 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3252 coprocessor mnemonics are not supported on the sparclet).
3253 (condf): Renamed to CONDF.
3254 (SLCBCC2): Delete F_ALIAS flag.
3256 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3258 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3259 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3261 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3263 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3264 that the shared library version number is set correctly.
3266 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3268 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3269 Miles Bader <miles@gnu.ai.mit.edu>.
3270 * configure: Rebuild.
3272 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3274 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3277 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3279 * configure: Rebuild with autoconf 2.8.
3281 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3283 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3284 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3286 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3288 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3289 since they appear as targets in Makefile.in.
3290 * configure: Rebuild.
3292 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3294 * mpw-make.sed: Edit out shared library support bits.
3296 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3298 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3299 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3300 (sparc_opcodes): Add sparclet insns.
3301 (sparclet_cpreg_table): New static local.
3302 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3303 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3305 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3307 * i386-dis.c (index16): New static variable.
3308 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3310 (OP_indirE): Return result of OP_E.
3311 (OP_E): Check for 16 bit addressing mode, and disassemble
3312 correctly. Optimised 32 bit case a little. Don't print
3313 "(base,index,scale)" when sib specifies only an offset.
3315 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3317 * configure.in: Set and substitute SHLIB_DEP.
3318 * configure: Rebuild.
3319 * Makefile.in (SHLIB_DEP): New variable.
3320 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3321 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3322 COMMON_SHLIB, add them to piclist with appropriate modifications.
3323 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3324 here: just use piclist.
3326 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3328 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3329 (print_insn_sparc): Rewrite v9/not-v9 tests.
3330 (compare_opcodes): Likewise.
3331 * sparc-opc.c (MASK_<ARCH>): Define.
3332 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3333 (sparclet,v6notv9): Define.
3334 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3335 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3337 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3339 * configure.in: Call AC_PROG_CC before configure.host.
3340 * configure: Rebuild.
3342 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3344 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3346 * i386-dis.c (onebyte_has_modrm): New static array.
3347 (twobyte_has_modrm): New static array.
3348 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3350 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3352 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3355 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3357 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3360 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3362 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3363 m68010up, not just m68020up | cpu32.
3365 * Makefile.in (SONAME): New variable.
3366 ($(SHLINK)): Make a link to the transformed name, as well.
3367 (stamp-tshlink): New target.
3368 (install): Skip stamp-tshlink during install.
3370 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3372 * configure.in: Call AC_ARG_PROGRAM.
3373 * configure: Rebuild.
3374 * Makefile.in (program_transform_name): New variable.
3375 (install): Transform library name before installing it.
3377 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3379 * i960-dis.c (mem): Add HX dcinva instruction.
3381 Support for building as a shared library, based on patches from
3382 Alan Modra <alan@spri.levels.unisa.edu.au>:
3383 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3384 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3385 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3386 * configure: Rebuild.
3387 * Makefile.in (ALLLIBS): New variable.
3388 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3389 (COMMON_SHLIB, SHLINK): New variables.
3390 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3391 (STAGESTUFF): Remove variable.
3392 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3393 (stamp-piclist, piclist): New targets.
3394 ($(SHLIB), $(SHLINK)): New targets.
3395 ($(OFILES)): Depend upon stamp-picdir.
3396 (disassemble.o): Build twice if PICFLAG is set.
3397 (MOSTLYCLEAN): Add pic/*.o.
3398 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3399 (distclean): Remove pic and stamp-picdir.
3400 (install): Install shared libraries.
3401 (stamp-picdir): New target.
3403 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3405 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3406 Print unknown instruction as "unknown", rather than in hex.
3408 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3410 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3412 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3414 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3416 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3418 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3419 when necessary. From Ulrich Drepper
3420 <drepper@myware.rz.uni-karlsruhe.de>.
3422 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3424 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3425 sparc_num_opcodes. Update architecture enum values.
3426 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3427 (sparc_opcode_lookup_arch): New function.
3428 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3429 (sparc_opcodes): Add v9a shutdown insn.
3431 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3433 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3434 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3436 (print_insn_sparc64): Deleted.
3437 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3440 * sparc-opc.c (architecture_pname): Add v9a.
3442 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3444 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3445 incorrectly defined as 0x16 when it should be 0x15.
3446 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3447 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3448 excb (exception barrier) which is defined in the Alpha
3449 Architecture Handbook version 2.
3450 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3451 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3452 disassembled as or, for example.
3454 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3456 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3457 (_print_insn_mips): Change i from int to unsigned int.
3459 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3461 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3462 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3464 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3466 * i386-dis.c: Added Pentium Pro instructions.
3468 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3470 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3473 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3475 * sh-opc.h (sh_nibble_type): Added REG_B.
3476 (sh_arg_type): Added A_REG_B.
3477 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3479 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3481 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3483 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3485 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3487 * Makefile.in (distclean): Remove stamp-h. From Ronald
3488 F. Guilmette <rfg@monkeys.com>.
3490 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3492 From David Mosberger-Tang <davidm@azstarnet.com>:
3493 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3496 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3498 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3499 (sh_table): Added many SH3 opcodes.
3500 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3502 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3504 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3505 (subco,subco.): Mark this PPC, not PPCCOM.
3507 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3509 * configure: Rebuild with autoconf 2.7.
3511 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3513 * configure: Rebuild with autoconf 2.6.
3515 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3517 * configure.in: Sort list of architectures. Accept but do nothing
3518 for alliant, convex, pyramid, romp, and tahoe.
3520 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3522 * a29k-dis.c (print_special): Change num to unsigned int.
3524 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3526 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3529 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3531 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3532 * configure: Rebuilt.
3534 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3536 * configure.in: Add case for bfd_i860_arch.
3537 * configure: Rebuild.
3539 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3541 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3542 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3543 (NEXTDOUBLE): Likewise.
3544 (print_insn_m68k): Don't match fmoveml if there is more than one
3545 register in the list.
3546 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3548 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3550 * m68k-opc.c: Use #W rather than #w.
3551 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3553 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3555 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3556 and likewise for all the dbxx opcodes.
3558 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3560 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3562 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3564 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3565 the VR4100 specific instructions to the mips_opcodes structure.
3567 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3569 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3570 ugly Metrowerks bug in CW6, is fixed in CW7.
3572 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3574 * ppc-opc.c (whole file): Add flags for common/any support.
3576 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3578 * Makefile.in (BISON): Remove macro.
3579 (FLAGS_TO_PASS): Remove BISON.
3581 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3583 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3585 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3586 instructions that take no args by looking at the match mask.
3587 (print_insn_arg): Always print "%" before register names.
3588 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3589 [case '_']: Don't print "@#" before address.
3590 [case 'J']: Use "%s" as format string, not register name.
3591 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3593 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3595 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3598 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3600 From David Mosberger-Tang <davidm@azstarnet.com>
3602 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3603 (alpha_insn_set): added definitions for VAX floating point
3604 instructions (Unix compilers don't generate these, but handcoded
3605 assembly might still use them).
3607 * alpha-dis.c (print_insn_alpha): added support for disassembling
3608 the miscellaneous instructions in the Alpha instruction set.
3610 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3612 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3613 no longer create sysdep.h, sed ppc-opc.c to work around a
3614 serious Metrowerks C bug.
3615 * mpw-make.in: Remove.
3616 * mpw-make.sed: New file, used by mpw-configure to edit
3617 Makefile.in into an MPW makefile.
3619 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3621 * Makefile.in (maintainer-clean): New synonym for realclean.
3623 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3625 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3626 which use '0', '1', and '2' instead. Specify the proper size for
3627 a pmove immediate operand. Correct the pmovefd patterns to be
3628 moves to a register, not from a register.
3629 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3631 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3633 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3634 %psr, %wim, %tbr as F_NOTV9.
3636 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3638 * Makefile.in (Makefile): Just rebuild Makefile when running
3640 (config.h, stamp-h): New targets.
3641 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3642 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3643 rebuilding config.h.
3644 * configure: Rebuild.
3646 * mips-opc.c: Change unaligned loads and stores with "t,A"
3647 operands to use "t,A(b)".
3649 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3651 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3653 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3655 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3656 until 3 instead of until 2.
3658 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3660 * Makefile.in (ALL_CFLAGS): Define.
3661 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3662 (MOSTLYCLEAN): Add config.log.
3663 (distclean): Don't remove config.log.
3664 * configure.in: Substitute HDEFINES.
3665 * configure: Rebuild.
3667 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3669 * sh-opc.h (sh_arg_type): Add F_FR0.
3670 (sh_table, case fmac): Add F_FR0 as first argument.
3672 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3674 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3676 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3678 * sparc-dis.c: Remove all references to NO_V9.
3680 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3682 * aclocal.m4: Just include ../bfd/aclocal.m4.
3683 * configure: Rebuild.
3685 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3687 * sparc-dis.c (X_DISP19): Define.
3688 (print_insn, case 'G'): Use it.
3689 (print_insn, case 'L'): Sign extend displacement.
3691 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3693 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3694 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3695 host_makefile_frag or frags.
3696 * aclocal.m4: New file.
3697 * configure: Rebuild.
3698 * Makefile.in (INSTALL): Set to @INSTALL@.
3699 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3700 (INSTALL_DATA): Set to @INSTALL_DATA@.
3702 (AR_FLAGS): Set to rc rather than qc.
3703 (CC): Define as @CC@.
3704 (CFLAGS): Set to @CFLAGS@.
3705 (@host_makefile_frag@): Remove.
3706 (config.status): Remove dependency upon @frags@.
3708 * configure.in: ../bfd/config.bfd now just sets shell variables.
3709 Use them rather than looking through target Makefile fragments.
3710 * configure: Rebuild.
3712 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3714 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3716 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3718 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3719 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3722 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3723 (lookup_{name,value}): New functions.
3724 (prefetch_table): New static local.
3725 (sparc_{encode,decode}_prefetch): New functions.
3726 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3728 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3730 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3733 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3735 * sh-dis.c: Correct comment on first line of file.
3737 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3739 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3741 * sparc-opc.c (asi, membar): New static locals.
3742 (sparc_{encode,decode}_{asi,membar}): New functions.
3743 (sparc_opcodes, membar insn): Fix.
3744 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3745 Support decoding of membar masks.
3748 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3750 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3752 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3754 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3755 and likewise for the other branches. Add bhs as an alias for bcc,
3756 and likewise for the size variants. Add dbhs as an alias for
3759 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3761 * sh-opc.h (FP sts instructions): Update to match reality.
3763 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3765 * m68k-dis.c: (fpcr_names): Add % before all register names.
3766 (reg_names): Likewise.
3767 (print_insn_arg): Don't explicitly print % before register names.
3768 Add % before register names in static array names. In case 'r',
3769 print data registers as `@(Dn)', not `Dn@'. When printing a
3770 memory address, don't print @# before it.
3771 (print_indexed): Change base_disp and outer_disp from int to
3772 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3773 syntax. Sign extend 8 byte displacement correctly.
3774 (print_base): Print using MIT syntax. Print zpc when appropriate.
3775 Change parameter disp from int to bfd_vma.
3777 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3780 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3782 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3783 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3784 * sh-opc.h (sh_arg_type): Add new operand types.
3785 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3787 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3789 * Makefile.in (distclean): Remove generated file config.h.
3791 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3793 * Makefile.in (distclean): Remove generated file config.h.
3795 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3797 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3799 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3801 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3802 rather than numopcodes. Use m68k_opcodes rather than removed
3803 opcode function. Don't check F_ALIAS.
3804 (print_insn_arg): Change first parameter to be const char *.
3805 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3806 (m68k-opc.o): New target.
3807 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3808 * configure: Rebuild.
3810 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3812 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3813 (opcode_bits, opcode_hash_table): New variables.
3814 (opcodes_initialized): Renamed from opcodes_sorted.
3815 (build_hash_table): New function.
3816 (is_delayed_branch): Use hash table.
3817 (print_insn): Renamed from print_insn_sparc, made static.
3818 Build and use hash table. If !sparc64, ignore sparc64 insns,
3819 and vice-versa if sparc64.
3820 (print_insn_sparc, print_insn_sparc64): New functions.
3821 (compare_opcodes): Move sparc64 opcodes to end.
3822 Print commutative insns with constant second.
3823 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3825 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3827 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3828 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3829 avoids printing a delay slot in a delay slot.
3830 * sh-opc.h (sh_table): Fully bracket last entry.
3832 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3834 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3836 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3838 * configure.in: Get host_makefile_frag from ${srcdir}.
3840 * configure.in: Autoconfiscated. Check for string[s].h. Create
3841 config.h from config.in. Don't set up sysdep.h link.
3842 * sysdep.h: New file.
3843 * configure, config.in: New files, generated from configure.in.
3844 * Makefile.in: Updated to be processed autoconf-style.
3845 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3846 (Makefile): Depend on config.status.
3847 (config.status): New rule.
3848 * configure.bat: Update Makefile substitutions.
3850 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3852 * mips-opc.c (L1): Define.
3853 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3854 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3857 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3859 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3860 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3861 have multiple add units but only a single logical unit.
3863 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3864 shifted by 18, without any insertion or extraction function.
3865 (insert_cr, extract_cr): Remove.
3867 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3869 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3872 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3874 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3875 * sh-opc.h: Add copyright.
3877 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3879 * Makefile.in (crunch-m68k): Delete extra target accidentally
3880 checked in a while ago.
3882 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3884 * sh-opc.h (sh_table): Add SH3 support.
3886 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3888 * sh-opc.h: Added bsrf and braf.
3890 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3892 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3893 bogus [ls]fm{ea,fd} patterns.
3895 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3896 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3897 initialize it from memory. Make function static.
3898 (print_insn_{big,little}_arm): New functions.
3899 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3900 the correct endianness.
3902 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3904 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3907 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3909 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3910 17th, so that it builds again using GCC as the compiler.
3912 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3914 * mips-dis.c (print_insn_little_mips): Cast return value from
3915 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3916 expects an unsigned long, and that might be fewer words of
3917 argument storage (e.g., if bfd_vma is long long on a 32-bit
3919 (print_insn_big_mips): Likewise with bfd_getb32 value.
3920 (_print_insn_mips): Now static.
3922 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3924 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3925 gcc memory hog problem with initializer is fixed.
3927 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3929 Merge in support for Mac MPW as a host.
3930 (Old change descriptions retained for informational value.)
3932 * mpw-config.in (archname): Compute from the config.
3933 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3935 * mpw-config.in (target_arch): Compute from canonical target.
3936 (m68k, mips, powerpc, sparc): Add architectures.
3937 * mpw-make.in (disassemble.c.o): Add.
3938 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3940 * mpw-config.in (BFD_MACHINES): Set to a default value.
3941 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3943 * mpw-make.in (CSEARCH): Add extra-include to search path.
3945 * mpw-config.in (varargs.h): Don't create.
3946 (sysdep.h): Create using forward-include.
3947 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3949 * mpw-config.in: New file, MPW version of configure.in.
3950 * mpw-make.in: New file, MPW version of Makefile.in.
3952 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3954 * alpha-dis.c (print_insn_alpha): Put empty statement after
3957 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3959 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3960 (low_sign_extend): Likewise.
3961 (get_field): Delete unused function.
3962 (set_field, deposit_14, deposit_21): Likewise.
3964 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3966 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3969 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3971 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3973 * alpha-opc.h (OSF_ASMCODE): define
3974 print pal-code names as defined in App C of the
3975 Alpha Architecture Reference Manual
3977 * alpha-dis.c: cleaned up output
3978 print stylized code forms as defined in App A.4.3 of the
3979 Alpha Architecture Reference Manual
3981 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3983 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3985 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3988 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3990 * m68k-dis.c (opcode): New function. Returns address of opcode
3991 table entry given index, even if the opcode table was split to
3992 work around gcc bugs.
3993 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3995 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3996 (reg_names): Now const.
3997 (print_insn_arg): Arrays cacheFieldName and names now const.
3998 (print_indexed): Array scales now const.
4000 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4002 * ppc-opc.c: Sort recently added instructions by minor opcode
4003 number within major opcode number.
4005 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4007 * hppa-dis.c: Include libhppa.h.
4009 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4011 * mips-opc.c: Change dli to use M_DLI, and add dla.
4013 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4015 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4017 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4019 * mips-opc.c: Add r4650 mul instruction.
4021 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4023 * mips-opc.c: Add uld and usd macros for unaligned double load and
4026 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4028 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4029 mfdcr, mtdcr, icbt, iccci.
4031 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4033 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4034 signed char fields to shorts, more portable.
4036 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4038 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4039 char fields as signed chars, since they may have negative values.
4041 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4043 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4044 (mycroft@netbsd.org).
4046 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4048 From "Logg, Ed" <elogg@ea.com>:
4049 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4050 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4053 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4055 * ppc-opc.c: Changes based on patch from David Edelsohn
4056 <edelsohn@mhpcc.edu>.
4057 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4060 (insert_tbr): New static function.
4061 (extract_tbr): New static function.
4062 (XFXFXM_MASK, XFXM): Define.
4063 (XSPRBAT_MASK, XSPRG_MASK): Define.
4064 (powerpc_opcodes): Add instructions to access special registers by
4065 name. Add mtcr and mftbu.
4067 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4069 * mips-opc.c (P3): Define.
4070 (mips_opcodes): Add mad and madu.
4072 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4074 * configure.in: Add W65 support.
4075 * disassemble.c: Likewise.
4076 * w65-opc.h, w65-dis.c: New files.
4078 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4080 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4083 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4085 * mips-opc.c: Add dli as a synonym for li.
4087 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4089 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4090 print something for reserved opcode values, even if it won't
4093 * mips-dis.c (_print_insn_mips): When initializing, shift right
4094 and mask, to avoid sign extension problems on the Alpha.
4096 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4099 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4101 * sh-opc.h (mov.l gbr): Get direction right.
4102 * sh-dis.c (print_insn_shx): New function.
4103 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4104 print opcodes with right byte order.
4106 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4108 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4109 to avoid conflicts with getopt.
4111 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4113 * hppa-dis.c (print_insn_hppa): Read the instruction using
4114 bfd_getb32, so that it works on a little endian or 64 bit host.
4115 Remove unused local variable op.
4117 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4119 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4120 addu does not work correctly if -mips3.
4122 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4124 * a29k-dis.c (print_special): Add special register names defined
4125 on 29030, 29040 and 29050.
4126 (print_insn): Handle new operand type 'I'.
4128 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4130 * Makefile.in (INSTALL): Use top level install.sh script.
4132 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4134 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4135 that it works on a little endian host.
4137 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4139 * configure.in: Use ${config_shell} when running config.bfd.
4141 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4143 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4145 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4147 * a29k-dis.c (print_insn): Print the opcode.
4149 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4151 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4153 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4155 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4157 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4159 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4160 which store a value into memory.
4162 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4164 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4165 * arm-dis.c, arm-opc.h: New files.
4167 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4169 * Makefile.in (ns32k-dis.o): Add dependency.
4170 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4171 string, not as array of chars.
4173 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4175 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4177 * sparc-opc.c: Added sparclite extended FP operations, and
4178 versions of v9 impdep* instructions permitting specification of
4181 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4183 * i960-dis.c (reg_names): Now const.
4184 (struct sparse_tabent): New type, copied from array type in mem
4186 (ctrl): Local static array ctrl_tab now const.
4187 (cobr): Local static array cobr_tab now const.
4188 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4189 static variable mem_tab no longer explicitly initialized. Changed
4190 mem_init to const array of struct sparse_tabent.
4191 (reg): Local static variable reg_tab no longer explicitly
4192 initialized. Changed reg_init to const array of struct
4194 (ea): Local static array scale_tab now const.
4196 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4199 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4201 * configure.bat: the disassember needs to be enabled for
4202 "objdump -d" to work in djgpp.
4204 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4206 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4207 (invalid_float): Enabled general version, doesn't require running
4208 on ns32k host. Changed to take char* argument, and test for
4209 explicitly specified sizes, instead of using sizeof() on host CPU
4211 (INVALID_FLOAT): Cast first argument.
4212 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4213 list_P032, list_M032): Now const.
4214 (optlist, list_search): Made appropriate arguments now point to
4216 (print_insn_arg): Changed static array of one-character-string
4217 pointers into a static const array of characters; fixed sprintf
4218 statement accordingly.
4220 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4222 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4223 from distribution. A ns32k-dis.c from a previous distribution has
4224 been brought up to date and supports the new interface.
4226 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4228 * configure.in: add bfd_ns32k_arch target support.
4230 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4231 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4233 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4235 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4238 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4240 * h8300-dis.c, mips-dis.c: Don't use true and false.
4242 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4244 * configure.in: Change --with-targets to --enable-targets.
4246 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4248 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4249 opcodes to the first instruction with that opcode, to speed
4250 disassembly of large files. From ralphc@pyramid.com (Ralph
4253 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4255 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4257 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4259 * configure.bat: update to latest makefile.in
4261 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4263 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4264 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4265 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4266 slot insn is in a delay slot.
4267 * z8k-opc.h: (resflg): Fix patterns.
4268 * h8500-opc.h Fix CR insn patterns.
4270 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4272 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4273 "cmpl" before POWER versions, so that gas -many uses them.
4275 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4277 * disassemble.c: New file.
4278 * Makefile.in (OFILES): Add disassemble.o.
4279 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4280 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4281 binutils/configure.in.
4283 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4284 opcode being examined.
4286 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4288 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4289 (insert_ral, insert_ram, insert_ras): New functions.
4290 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4291 RAS for store with update.
4293 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4295 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4296 (edelsohn@npac.syr.edu).
4298 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4300 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4303 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4305 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4307 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4309 * ppc-opc.c (powerpc_operands): The signedp field has been
4310 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4311 instead. Add new operand SISIGNOPT.
4312 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4313 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4314 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4317 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4319 * i386-dis.c (struct private): Renamed to dis_private. `private'
4320 is a reserved word for dynix cc.
4322 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4324 * configure.in: Change error message to refer to bfd/config.bfd
4325 rather than bfd/configure.in.
4327 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4329 * ppc-opc.c: Define POWER2 as short alias flag.
4330 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4333 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4335 * i960-dis.c (print_insn_i960): Don't read a second word for
4336 opcodes 0, 1, 2 and 3.
4338 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4340 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4342 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4344 * m68881-ext.c: Removed; no longer used.
4345 * Makefile.in: Changed accordingly.
4347 * m68k-dis.c (ext_format_68881): Don't declare.
4348 (print_insn_m68k): If an instruction uses place 'i', it uses at
4349 least four fixed bytes.
4350 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4351 extended float, convert to double using floatformat_to_double, not
4352 ieee_extended_to_double, and fetch the data before converting it.
4354 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4356 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4357 davidj@ICSI.Berkeley.EDU (David Johnson).
4359 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4361 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4362 PowerPC uses bdnz[l][a].
4364 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4366 * dis-buf.c, i386-dis.c: Include sysdep.h.
4368 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4370 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4372 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4373 by Motorola PowerPC 601 with PPC_OPCODE_601.
4374 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4375 Disassemble Motorola PowerPC 601 instructions as well as normal
4376 PowerPC instructions.
4378 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4380 * i960-dis.c (reg, mem): Just use a static array instead of
4383 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4385 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4386 condition name index if this is for a negated condition.
4388 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4389 Floating point format for 'H' operand is backwards from normal
4390 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4391 operands (fmpyadd and fmpysub), handle bizarre register
4392 translation correctly for single precision format.
4394 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4395 or 'I' operands if the next format specifier is 'M' (fcmp
4396 condition completer).
4398 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4400 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4401 single number giving a bitmask for the MB and ME fields of an M
4402 form instruction. Change NB to accept 32, and turn it into 0;
4403 also turn 0 into 32 when disassembling. Seperated SH from NB.
4404 (insert_mbe, extract_mbe): New functions.
4405 (insert_nb, extract_nb): New functions.
4406 (SC_MASK): Mask out SA and LK bits.
4407 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4408 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4409 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4410 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4411 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4412 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4413 (powerpc_macros): Define table of macro definitions.
4414 (powerpc_num_macros): Define.
4416 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4417 if PPC_OPERAND_NEXT is set.
4419 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4421 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4422 char. Retrieve contents using bfd_getl32 instead of shifting.
4424 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4426 * ppc-opc.c: New file. Opcode table for PowerPC, including
4427 opcodes for POWER (RS/6000).
4428 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4429 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4430 (CFILES): Add ppc-dis.c.
4431 (ppc-dis.o, ppc-opc.o): New targets.
4432 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4434 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4436 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4437 No space before 'u', 'f', or 'N'.
4439 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4441 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4442 farther than we should.
4444 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4446 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4448 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4450 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4452 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4453 needs it, to prevent reading past the end of a section.
4455 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4457 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4458 Removed t,A case for la; always use t,A(b) case.
4460 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4462 From Ted Lemen <mellon@pepper.ncd.com>
4463 * mips-dis.c (print_insn_arg): Handle 'k'.
4464 * mips-opc.c: Make cache use k, not t.
4466 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4468 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4469 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4470 FLOAT_FORMAT_CODE to put out floating point register names.
4472 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4474 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4476 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4478 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4480 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4482 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4483 larger than 32. Moved dsxx32 variants first for disassembler.
4485 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4487 * z8kgen.c, z8k-opc.h: Add full lda information.
4489 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4491 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4492 movb instructions. Any necessary space will be emitted by
4493 the code to handle nullification completers.
4495 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4497 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4499 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4501 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4502 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4504 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4506 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4508 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4510 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4511 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4513 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4515 * m88k-dis.c (m88kdis): comment change. Remove space after
4517 (printop): handle new arg types DEC and XREG for m88110.
4519 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4521 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4522 type for absolute branch addresses. Delete special
4523 "ble" and "be" code in 'W' operand code.
4525 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4527 * mips-opc.c: Set hazard information correctly for branch
4528 likely instructions.
4530 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4532 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4533 info->fprintf_func for printing and info->print_address_func for
4536 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4538 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4540 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4542 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4543 Corrected second case of "b" for disassembler.
4545 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4547 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4548 to BFD swapping routines to correspond to BFD name changes.
4550 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4552 * mips-opc.c: Change div machine instruction to be z,s,t rather
4553 than s,t. Change div macro to be d,v,t rather than d,s,t.
4554 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4555 rem and remu which generates only the corresponding div
4556 instruction. This is for compatibility with the MIPS assembler,
4557 which only generates the simple machine instruction when an
4558 explicit destination of $0 is used.
4559 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4561 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4563 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4564 WR_31 hazard for bal, bgezal, bltzal.
4566 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4568 * hppa-dis.c (print_insn_hppa): Use print function
4569 from within the disassemble_info, not fprintf_filtered.
4571 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4573 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4574 Law, law@cs.utah.edu.)
4576 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4578 * mips-opc.c ("absu"): Removed.
4581 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4583 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4584 Changed hazard information to distinguish between memory load
4585 delays and coprocessor load delays.
4587 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4589 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4591 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4593 * configure.in: Don't pass cpu to config.bfd.
4595 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4597 * m88k-dis.c (m88kdis): Make class unsigned.
4599 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4601 * alpha-dis.c (print_insn_alpha): One branch format case was
4602 missing the instruction name.
4604 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4606 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4607 Add the arch-specific auxiliary files.
4608 (OFILES): Remove the arch-specific auxiliary files
4609 and use BFD_MACHINES instead of DIS_LIBS.
4610 * configure.in: Set BFD_MACHINES based on --with-targets option.
4612 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4614 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4617 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4619 * sparc-opc.c: Change CONST to const to deal with gcc
4620 -Dconst=__const -traditional.
4622 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4624 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4625 coprocessor instructions out of #if 0, and made them use new
4628 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4630 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4632 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4634 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4635 instruction, for use by the disassembler.
4637 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4638 hand-coded sign extensions that depended on 32-bit host ints.
4639 FIXME, we still depend on big-endian host bitfield ordering.
4640 (sparc_print_insn): Set the insn_info_valid field, and the
4641 other fields that describe the instruction being printed.
4643 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4645 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4646 `jmp' instead of just one of them.
4648 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4650 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4651 (fput_fp_reg_r): Renamed from fput_reg_r.
4652 (fput_fp_reg): New function.
4653 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4655 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4657 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4659 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4661 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4663 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4664 don't output a space.
4666 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4668 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4670 * mips-opc.c: New file, containing opcode table from
4671 ../include/opcode/mips.h.
4672 * Makefile.in: Add it.
4674 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4676 * m88k-dis.c: New file, moved in from gdb and changed to use the
4677 new dis-asm.h disassembler interface.
4678 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4679 (m88k-dis.o): New target.
4681 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4683 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4684 argument string const char * to correspond to opcode/mips.h.
4686 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4688 * mips-dis.c: Updated to account for name changes in new version
4690 * Makefile.in: Added header file dependencies.
4692 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4694 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4696 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4698 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4699 extend, rather than shifts.
4701 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4703 * Makefile.in: Undo 15 June change.
4705 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4707 * m68k-dis.c (print_insn_arg): Change return value to byte count
4709 * m68k-dis.c: Re-write to detect invalid operands before
4710 printing anything, so we can handle this the same way we
4711 handle invalid opcodes.
4713 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4715 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4717 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4719 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4722 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4724 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4726 * configure.in: Do make sysdep.h link.
4727 * Makefile.in: Search ../include. Don't search ../bfd.
4729 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4731 Changes from Jeff Law, law@cs.utah.edu:
4732 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4733 Do not print a space before the completers specified by
4736 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4738 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4739 defined, since gdb has been fixed.
4741 Changes from Jeff Law, law@cs.utah.edu:
4742 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4743 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4744 be a *disassemble_info, not a *FILE.
4745 * hppa-dis.c: Support 'd', '!', and 'a'.
4746 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4747 * hppa-dis.c: Delete cases which are no longer needed.
4749 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4751 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4753 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4755 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4758 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4760 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4761 * configure.in: No longer need to configure to get sysdep.h.
4763 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4765 * Patches from Jeffrey Law <law@cs.utah.edu>.
4766 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4767 templates for 1.1 FP computational instructions.
4769 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4771 * h8500-dis.c (print_insn_h8500): Address argument is type
4773 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4776 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4777 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4779 * sparc-dis.c (compare_opcodes): Move static declaration to
4782 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4784 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4785 instruction, remove unimp hack from 'l' argument.
4787 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4789 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4792 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4794 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4795 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4798 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4800 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4801 arrays of string pointers to 2-d arrays of chars, to save
4804 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4806 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4807 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4809 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4811 * hppa-dis.c: New file from Utah, adapted to new disassembler
4813 * Makefile.in: Include it.
4815 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4817 * sh-dis.c, sh-opc.h: New files.
4819 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4821 * alpha-dis.c, alpha-opc.h: New files.
4823 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4825 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4828 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4830 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4832 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4834 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4837 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4839 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4840 and double percent signs a few places.
4842 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4844 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4845 Use info->print_address_func not print_address.
4847 * dis-buf.c (generic_print_address): New function.
4849 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4851 * Makefile.in: Add sparc-dis.c.
4852 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4854 Add `add' instruction to the set that get checked
4855 for a preceding `sethi' in order to print an absolute address.
4856 * (print_insn): Disassembly prefers real instructions.
4857 (is_delayed_branch): Speed up.
4858 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4859 Still missing some float ops, and needs testing.
4860 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4861 F_ALIAS. Use printf, not fprintf, when not passing a file
4863 (compare_opcodes): Check that identical instructions have
4864 identical opcodes, complain otherwise.
4867 * Include reg_names.
4869 Use dis-asm.h/read_memory_func interface.
4871 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4873 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4874 deliberately return non-zero to setjmp from longjmp. Otherwise
4875 this code fails to compile.
4877 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4879 * m68k-dis.c: Fix prototype for fetch_arg().
4881 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4883 * dis-buf.c: New file, for new read_memory_func interface.
4884 Makefile.in (OFILES): Include it.
4885 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4886 Use new read_memory_func interface.
4888 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4890 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4891 * h8500-opc.h: Fix couple of opcodes.
4893 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4895 * Makefile.in: add dvi & installcheck targets
4897 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4899 * Makefile.in: Update for h8500-dis.c.
4901 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4903 * h8500-dis.c, h8500-opc.h: New files
4905 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4907 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4908 ../include/dis-asm.h.
4909 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4910 and ../gdb/m68k-pinsn.c).
4911 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4912 and ../gdb/i386-pinsn.c).
4913 * m68881-ext.c: New file. Moved definition of
4914 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4915 * Makefile.in: Adjust for new files.
4916 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4917 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4918 can be dis-assembled.
4920 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4922 * mips-dis.c (print_insn_arg): Now returns void.
4924 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4926 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4927 files that use the macros.
4929 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4931 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4932 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4933 (CFILES): Added mips-dis.c.
4935 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4937 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4938 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4940 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4942 * Makefile.in: Improve *clean rules.
4943 * configure.in: Allow a default host.
4945 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4947 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4948 files include other sysdep files
4950 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4952 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4954 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4956 * configure.in: For host support, use ../bfd/configure.host
4957 so it stays in sync with the ../bfd/hosts database.
4959 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4961 * configure.in: use cpu-vendor-os triple instead of nested cases
4963 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4965 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4966 *always* the wrong one.
4968 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4970 * z8kgen.c: added copyright info
4972 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4974 * z8k-dis.c (unparse_instr): prettier tabs
4975 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4977 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4979 * configure.in: Add ncr* configuration.
4980 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4981 picayune ANSI compilers happy.
4983 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4985 * configure.in (i386): Make i386 and i486 synonymous for now.
4986 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4988 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4990 * Makefile.in (install): Fix typo.
4992 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4994 * Makefile.in (make): Remove obsolete crud.
4995 (sparc-opc.o): Avoid Sun Make VPATH bug.
4997 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4999 * Makefile.in: since there are no SUBDIRS, remove rule and
5000 references of subdir_do.
5002 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5004 * Makefile.in (install): Get the library name right here too.
5005 Don't install bfd.h, since it's unrelated to this library. No
5006 subdirs to recurse into, either.
5007 (CFILES): The source file has a .c suffix, not .o.
5009 * sparc-opc.c: New file, moved from BFD.
5010 * Makefile.in (OFILES): Build it.
5012 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5014 * z8k-dis.c: fixed forward refferences of some declarations.
5016 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5018 * Makefile.in: get the name of the library right
5020 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5022 * z8k-dis.c: knows how to disassemble z8k stuff
5023 * z8k-opc.h: new file full of z8000 opcodes
5027 version-control: never