1 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
3 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
5 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
7 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
9 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
11 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
13 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
15 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
17 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
20 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
22 * hppa-dis.c: (print_insn_hppa): Add missing break after
25 * hppa-dis.c: Finish constifying various completers, register
28 1999-09-14 Michael Meissner <meissner@cygnus.com>
30 * configure.in (Canonicalization of target names): Remove adding
31 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
32 generates $ac_config_sub with a ${CONFIG_SHELL} already.
33 * configure: Regenerate.
35 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
37 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
39 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
41 1999-09-07 Nick Clifton <nickc@cygnus.com>
43 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
44 names for the mulu and muls patterns.
46 1999-09-04 Steve Chamberlain <sac@pobox.com>
50 * disassemble.c (disassembler): Handle bfd_arch_pj.
51 * configure.in: Handle bfd_pj_arch.
52 * Makefile.am: Rebuild dependencies.
53 (CFILES): Add pj-dis.c and pj-opc.c.
54 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
55 * configure, Makefile.in: Rebuild.
57 1999-09-04 H.J. Lu <hjl@gnu.org>
59 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
61 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
63 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
65 1999-08-04 Doug Evans <devans@casey.cygnus.com>
67 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
68 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
69 * m32r-opinst.c: Rebuild.
71 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
73 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
76 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
78 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
79 extract_10U_store): New.
80 (print_insn_hppa): Add new completers.
82 * hppa-dis.c (signed_unsigned_names,mix_half_names,
83 saturation_names): New.
84 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
86 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
88 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
90 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
91 to decide to print a space.
93 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
95 * i386-dis.c: Add AMD athlon instruction support.
97 1999-08-10 Ian Lance Taylor <ian@zembu.com>
99 From Wally Iimura <iimura@microunity.com>:
100 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
101 overflow at end of address space.
102 (generic_print_address): Use sprintf_vma.
104 1999-08-08 Ian Lance Taylor <ian@zembu.com>
106 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
107 MKDEP. Rebuild dependencies.
108 * Makefile.in: Rebuild.
110 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
112 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
113 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
114 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
115 (print_insn_hppa): Add 64 bit condition completers.
117 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
119 * hppa-dis.c (print_insn_hppa): Change condition args to use
122 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
124 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
127 1999-07-21 Ian Lance Taylor <ian@zembu.com>
130 * configure.bat: Remove; obsolete.
132 1999-07-11 Ian Lance Taylor <ian@zembu.com>
134 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
135 (generic_strcat_address): Add cast to avoid warning.
136 * i386-dis.c: Initialize all structure fields to avoid warnings.
137 Add ATTRIBUTE_UNUSED as appropriate.
139 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
141 * sparc-dis.c (print_insn_sparc): Differentiate between
142 addition and oring when guessing symbol for comment.
144 1999-07-05 Nick Clifton <nickc@cygnus.com>
146 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
149 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
151 * i386-dis.c: Mention intel mode specials in macro char comment.
153 1999-06-21 Ian Lance Taylor <ian@zembu.com>
155 * alpha-dis.c: Don't include <stdlib.h>.
156 * arm-dis.c: Include "sysdep.h".
157 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
159 * Makefile.am: Rebuild dependencies.
160 * Makefile.in: Rebuild.
162 1999-06-16 Nick Clifton <nickc@cygnus.com>
164 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
167 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
169 * arm-dis.c (arm_regnames): Turn into a pointer to a register
171 (arm_regnames_standard): New variable: Array of ARM register
172 names according to ARM instruction set nomenclature.
173 (arm_regnames_apcs): New variable: Array of ARM register names
174 according to ARM Procedure Call Standard.
175 (arm_regnames_raw): New variable: Array of ARM register names
176 using just 'r' and the register number.
177 (arm_toggle_regnames): New function: Toggle the chosen register set
179 (parse_disassembler_options): New function: Parse any target
180 disassembler command line options.
181 (print_insn_big_arm): Call parse_disassembler_options if any
183 (print_insn_little_arm): Call parse_disassembler_options if any
186 1999-06-13 Ian Lance Taylor <ian@zembu.com>
188 * i386-dis.c (FWAIT_OPCODE): Define.
189 (used_prefixes): New static variable.
190 (fetch_data): Don't print an error message if we have already
191 fetched some bytes successfully.
192 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
193 (prefix_name): New static function.
194 (print_insn_i386): If setjmp fails, indicating a data error, but
195 we have managed to fetch some bytes, print the first one as a
196 prefix or a .byte pseudo-op. If fwait is followed by a non
197 floating point instruction, print the first prefix. Set
198 used_prefixes when prefixes are used. If any prefixes were not
199 used after disassembling the instruction, print the first prefix
200 instead of printing the instruction.
201 (putop): Set used_prefixes when prefixes are used.
202 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
203 (OP_DIR, OP_SIMD_Suffix): Likewise.
205 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
207 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
208 Support signx %reg, clruw %reg.
210 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
212 * sparc-opc.c: Add aliases Solaris as supports.
214 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
216 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
217 * Makefile.in: Regenerated.
219 1999-06-03 Philip Blundell <philb@gnu.org>
221 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
222 when target is PC-relative.
224 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
226 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
229 * m68k-dis.c (fetch_arg): Add places `n', `o'.
231 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
232 Add mcf5206e to appropriate instructions.
233 Add alias for MAC, MSAC.
235 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
238 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
239 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
241 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
243 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
245 * i386-dis.c (Ed): Define.
246 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
248 (OP_rm): Rename to OP_Rd.
251 (putop): Add const to template and p.
252 (print_insn_x86): Delete.
253 (print_insn_i386): Merge old function print_insn_x86. Add const
255 (struct dis386): Add const to name.
256 (dis386_att, dis386_intel): Add const.
257 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
258 (names32, names16, names8, names_seg, index16): Add const.
259 (grps, prefix_user_table, float_reg): Add const.
260 (float_mem_att, float_mem_intel): Add const.
261 (oappend): Add const to s.
262 (OP_REG): Add const to s.
263 (ptr_reg): Add const to s.
264 (dofloat): Add const to dp.
265 (OP_C): Don't skip modrm, it's now done in OP_Rd.
268 (OP_Rd): Check for valid mod. Call Op_E to print.
269 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
270 (OP_MS): Check for valid mod. Call Op_EM to print.
271 (OP_3DNowSuffix): Set obufp and use oappend rather than
272 strcat. Call BadOp() for errors.
273 (OP_SIMD_Suffix): Likewise.
274 (BadOp): New function.
276 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
278 * i386-dis.c (dis386_intel): Remove macro chars, except for
279 jEcxz. Change cWtR and cRtd to cW and cR.
280 (dis386_twobyte_intel): Remove macro chars here too.
281 (putop): Handle R and W macros for intel mode.
283 * i386-dis.c (SIMD_Fixup): New function.
284 (dis386_twobyte_att): Use it on movlps and movhps, and change
285 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
286 (dis386_twobyte_intel): Same here.
288 * i386-dis.c (Av): Remove.
292 (OP_SIMD_Suffix): New function.
293 (OP_DIR): Remove dead code.
294 (eAX_reg..eDI_reg): Renumber.
295 (onebyte_has_modrm): Table numbering comments.
296 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
297 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
298 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
299 and handle SIMD cmp insns in OP_SIMD_Suffix.
300 (info->bytes_per_line): Bump from 5 to 6.
302 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
303 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
305 PIII SIMD support from Doug Ledford <dledford@redhat.com>
306 * i386-dis.c (XM, EX, None): Define.
307 (OP_XMM, OP_EX, OP_None): New functions.
308 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
309 (GRP14): Rename to GRPAMD.
310 (GRP*): Add USE_GROUPS flag.
312 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
313 (twobyte_has_modrm): Add SIMD entries.
314 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
315 (grps): Add SIMD insns.
316 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
317 oappend repz if uses_f3_prefix. Add code to handle new groups for
320 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
321 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
322 operand from Av to Jv.
324 1999-05-07 Nick Clifton <nickc@cygnus.com>
326 * mcore-dis.c (print_insn_mcore): Use .short to display
327 unidentified instructions, not .word.
329 1999-04-26 Tom Tromey <tromey@cygnus.com>
331 * aclocal.m4, configure: Updated for new version of libtool.
333 1999-04-14 Doug Evans <devans@casey.cygnus.com>
335 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
336 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
338 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
340 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
343 1999-04-10 Doug Evans <devans@casey.cygnus.com>
345 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
346 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
348 1999-04-06 Ian Lance Taylor <ian@zembu.com>
350 * opintl.h (LC_MESSAGES): Never define.
352 1999-04-04 Ian Lance Taylor <ian@zembu.com>
354 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
355 (separator_char, scale_char): Likewise.
356 (print_insn_x86): Likewise.
357 (print_insn_i386): Likewise. Add declaration.
359 1999-03-26 Doug Evans <devans@casey.cygnus.com>
361 * fr30-dis.c: Rebuild.
362 * m32r-dis.c: Rebuild.
364 1999-03-23 Ian Lance Taylor <ian@zembu.com>
366 * m68k-opc.c: Change compare instructions to use "@s" rather than
367 ";s" when used with an immediate operand.
369 1999-03-22 Doug Evans <devans@casey.cygnus.com>
371 * cgen-opc.c (cgen_set_cpu): Delete.
372 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
373 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
375 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
377 * po/opcodes.pot: Rebuild.
379 1999-03-16 Martin Hunt <hunt@cygnus.com>
381 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
383 1999-03-11 Doug Evans <devans@casey.cygnus.com>
385 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
386 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
387 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
388 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
389 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
390 * m32r-opinst.c: Rebuild.
392 1999-02-25 Doug Evans <devans@casey.cygnus.com>
394 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
395 (cgen_hw_lookup_by_num): Rewrite.
396 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
397 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
398 * m32r-opinst.c: Rebuild.
400 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
402 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
403 (insert_jhint): Fix insertion mask.
404 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
406 1999-02-10 Doug Evans <devans@casey.cygnus.com>
408 * Makefile.in: Rebuild.
410 1999-02-09 Doug Evans <devans@casey.cygnus.com>
412 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
413 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
414 * Makefile.am: Remove references to them.
415 (HFILES): Add fr30-desc.h,m32r-desc.h.
416 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
418 (ALL_MACHINES): Update.
419 * configure.in: Redo handling of cgen_files.
420 (bfd_i960_arch): Delete i960c-*.lo files.
421 * configure: Regenerate.
422 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
423 (hash_insn_array): Rewrite.
424 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
425 (hash_insn_array): Rewrite.
426 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
427 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
428 (cgen_lookup_get_insn_operands): Ditto.
429 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
430 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
431 * po/POTFILES.in: Rebuild.
432 * po/opcodes.pot: Rebuild.
434 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
436 * Makefile.am: Rebuild dependencies.
437 (HFILES): Add fr30-opc.h.
438 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
439 * Makefile.in: Rebuild.
441 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
442 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
444 * acconfig.h: Remove.
445 * configure: Rebuild with current autoconf/automake.
446 * aclocal.m4: Likewise.
447 * config.in: Likewise.
448 * Makefile.in: Likewise.
450 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
452 * m68k-opc.c: Correct move (not movew) to status word on 5200.
454 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
456 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
457 * i386-dis.c (x_mode): Define.
461 (dis386_twobyte): Remove.
462 (dis386_twobyte_att): New.
463 (dis386_twobyte_intel): New.
464 (print_insn_x86): Use new arrays.
466 (float_mem_intel): New.
467 (float_mem_att): New.
468 (dofloat): Use new float_mem arrays.
469 (print_insn_i386_att): New.
470 (print_insn_i386_intel): New.
471 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
472 (putop): Handle intel syntax.
473 (OP_indirE): Handle intel syntax.
474 (OP_E): Handle intel syntax.
475 (OP_I): Handle intel syntax.
476 (OP_sI): Handle intel syntax.
477 (OP_OFF): Handle intel syntax.
481 1999-01-27 Doug Evans <devans@casey.cygnus.com>
483 * fr30-opc.h,fr30-opc.c: Rebuild.
484 * i960c-opc.h,i960c-opc.c: Rebuild.
485 * m32r-opc.c: Rebuild.
487 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
489 * hppa-dis.c: revert HP merge changes until HP gives us
492 1999-01-19 Nick Clifton <nickc@cygnus.com>
494 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
495 offsets as well as symbloic address.
497 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
499 * hppa-dis.c: fix comments and some indentation.
501 1999-01-12 Doug Evans <devans@casey.cygnus.com>
503 * fr30-opc.c,i960c-opc.c: Regenerate.
505 1999-01-11 Doug Evans <devans@casey.cygnus.com>
507 * fr30-opc.c: Regenerate.
509 1999-01-06 Doug Evans <devans@casey.cygnus.com>
511 * m32r-dis.c: Regenerate.
513 1999-01-05 Doug Evans <devans@casey.cygnus.com>
515 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
516 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
517 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
519 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
521 * configure.in: Require autoconf 2.12.1 or higher.
523 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
525 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
527 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
529 * fr30-opc.c: Regenerated.
531 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
533 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
535 1998-12-15 Dave Brolley <brolley@cygnus.com>
537 * fr30-opc.c,fr30-opc.h: Regenerated.
539 1998-12-14 Dave Brolley <brolley@cygnus.com>
541 * fr30-opc.c,fr30-opc.h: Regenerated.
543 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
545 * fr30-opc.c,fr30-opc.h: Regenerated.
547 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
549 * m32r-opc.c: Regenerate.
551 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
553 * dis-buf.c (generic_strcat_address): reformat to GNU coding
554 conventions. change sprintf call to an sprintf_vma call.
556 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
558 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
560 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
562 The following changes were made by
563 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
564 David Taylor <taylor@texas.cygnus.com>, and
565 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
566 merge in changes by HP; HP did not create ChangeLog entries.
568 * dis-buf.c (generic_strcat_address): new function.
570 * hppa-dis.c: Changes to improve hppa disassembly.
571 Changed formatting in : reg_names, fp_reg_names,control_reg,
572 New variables : sign_extension_names, deposit_names, conversion_names
573 float_test_names, compare_cond_names_double, add_cond_names_double,
574 logical_cond_names_double, unit_cond_names_double,
575 branch_push_pop_names, saturation_names, shift_names, mix_names,
576 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
577 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
578 (fput_const): renamed as fput_hex_const
580 - use the macros fputs_filtered and
581 fput_decimal_const whenever possible; calls to sign_extend require
582 2 params -- add a missing second param of 0.
583 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
584 architecture version number of current machine. HP folks are
585 trying to handle situation where the target program was compiled
586 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
588 - added new cases : 'g', 'B', 'm'
589 - added cases specifically for PA 2.0
590 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
591 - calls to fput_const become calls to fput_hex_const
593 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
595 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
596 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
597 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
598 * Makefile.in: Rebuilt.
599 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
601 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
602 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
604 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
606 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
608 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
610 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
612 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
613 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
615 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
617 * fr30-opc.c: Regenerate.
619 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
621 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
623 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
625 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
627 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
629 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
631 1998-11-30 Doug Evans <devans@casey.cygnus.com>
633 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
634 CGEN_INSN_BASE_VALUE.
635 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
636 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
638 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
640 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
642 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
644 * fr30-asm.c,fr30-dis.c: Regenerated.
646 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
648 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
650 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
652 * fr30-opc.c: Regenerated.
654 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
656 * fr30-opc.c: Regenerated.
657 * fr30-opc.h: Regenerated.
658 * fr30-dis.c: Regenerated.
659 * fr30-asm.c: Regenerated.
661 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
663 * mips-opc.c (sync.p,sync.l): Swap insn values.
665 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
667 * fr30-opc.c: Regenerate.
669 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
671 * fr30-opc.c: Regenerated.
672 * fr30-opc.h: Regenerated.
674 1998-11-18 Doug Evans <devans@casey.cygnus.com>
676 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
677 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
679 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
681 * fr30-opc.c: Regenerated.
683 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
685 * fr30-opc.c: Regenerated.
686 * fr30-opc.h: Regenerated.
687 * fr30-dis.c: Regenerated.
688 * fr30-asm.c: Regenerated.
690 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
692 * po/opcodes.pot: Regenerated.
693 * fr30-opc.c: Regenerated.
694 * fr30-opc.h: Regenerated.
695 * fr30-dis.c: Regenerated.
696 * fr30-asm.c: Regenerated.
698 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
700 * disassemble.c (disassembler): Add support for FR30 target.
702 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
704 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
705 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
707 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
709 * po/opcodes.pot: Regenerate.
710 * po/POTFILES.in: Regenerate.
711 * fr30-opc.c: Regenerate.
712 * fr30-opc.h: Regenerate.
714 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
716 * m32r-asm.c: Regenerate.
718 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
720 * configure.in: Added case for bfd_fr30_arch.
721 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
722 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
723 (CLEANFILES): Added stamp-fr30.
725 * fr30-asm.c: New file.
726 * fr30-dis.c: New file.
727 * fr30-opc.c: New file.
728 * fr30-opc.h: New file.
729 * po/POTFILES.in: Regenerated
730 * po/opcodes.pot: Regenerated
732 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
734 * configure.in: detect cygwin* instead of cygwin32*
735 * configure: regenerate
737 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
739 * mips-opc.c (IS_M): Added.
741 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
743 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
745 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
747 * m32r-opc.h,m32r-opc.c: Regenerate.
749 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
751 * i386-dis.c (OP_3DNowSuffix): New static function.
754 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
755 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
756 (insn_codep): New static variable.
757 (print_insn_x86): Init insn_codep after prefixes.
758 (grps): Add GRP14 entries for prefetch, prefetchw.
761 From Jeff B Epler <jepler@usgs.gov>
762 * i386-dis.c (Suffix3DNow): New table.
764 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
766 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
768 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
770 * d10v-dis.c (print_operand): If num is nonzero, then
771 add OPERAND_ACC1, not OPERAND_ACC0.
773 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
775 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
778 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
780 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
783 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
785 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
787 1998-09-09 Michael Meissner <meissner@cygnus.com>
789 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
792 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
794 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
796 (print_insn_little_arm): Detect Thumb symbols in elf object
799 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
801 * alpha-dis.c (print_insn_alpha): Use the machine type to
802 decide which PALcode set to include.
804 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
806 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
808 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
810 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
811 MSUB and MSUBS instructions.
813 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
815 * ppc-opc.c (powerpc_operands): Omit parens around additions in
818 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
820 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
821 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
822 +, -, and d for ColdFire.
824 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
825 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
826 (extract_mbe): Likewise.
828 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
830 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
832 * m10300-opc.c: First cut at UDF instructions.
834 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
836 * m32r-opc.c: Regenerate (remove semantic descriptions).
838 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
840 * arm-dis.c (print_insn_big_arm): Fix indentation.
841 (print_insn_little_arm): Likewise.
843 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
845 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
847 (print_insn_little_arm): Likewise.
849 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
851 Move all global state data into opcode table struct, and treat
852 opcode table as something that is "opened/closed".
853 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
854 (cgen_asm_init): Delete.
855 (cgen_set_parse_operand_fn): New function.
856 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
857 (cgen_dis_init): Delete.
858 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
859 (cgen_current_{opcode_table_mach,endian}): Delete.
860 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
862 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
864 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
867 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
869 * m10300-opc.c: Add entries for "no_match_operands" field in
872 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
874 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
876 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
878 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
880 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
882 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
884 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
886 (OP_J): Remove unnecessary subtraction when 16-bit displacement
887 will be masked later.
889 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
891 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
893 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
895 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
897 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
899 * m10300-dis.c: Only recognize instructions from the currently
901 * m10300-opc.c: Add field indicating the particular variant of
902 the mn10300 each instruction is available on.
904 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
906 * configure.in: For bfd_vax_arch, build vax-dis.lo.
907 * Makefile.am: Rebuild dependencies.
908 (CFILES): Add vax-dis.c.
909 (ALL_MACHINES): Add vax-dis.lo.
910 * aclocal.m4: Rebuild with current libtool.
911 * configure, Makefile.in: Rebuild.
913 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
915 * vax-dis.c: New file, from work by Pauline Middelink
916 <middelin@polyware.iaf.nl>.
917 * disassemble.c (ARCH_vax): Define if ARCH_all.
918 (disassembler): Add case for ARCH_vax.
919 * makefile.vms: Support compilation on vms/vax.
921 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
923 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
924 related to sign extension and the size of ints.
926 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
928 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
929 instructions. Support (sp) addressing mode by expanding it into
932 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
934 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
936 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
938 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
940 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
942 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
945 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
947 * mips-dis.c (print_insn_little_mips): Previously, instruction
948 printing references the symbol table to determine whether the
949 instruction resides in a block regular instructions or mips16
950 instructions. However, when the disassembler gets used in other
951 environments where the symbol table is not present, we no longer
952 rely in the symbol table, rather, use the low bit of the
953 instructions address to guess. There should be no change for usage
954 of the disassembler in host based programs, gdb, objdump.
955 (print_insn_big_mips): ditto.
956 (print_insn_mips): ditto
958 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
960 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
962 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
964 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
966 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
968 * i386-dis.c (index16): Add '%' to register names. Use ','
971 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
973 * i386-dis.c: Don't print opcode suffix when we can figure out the
974 size (and gas can!) by register operands, or from the default
976 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
978 (dis386, dis386_twobyte, grps): Use new suffix macros.
979 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
980 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
981 order of cmps operands to agree with Intel docs. Correct operand
982 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
983 agree with Intel docs.
984 (print_insn_x86): Print orphan fwait before other prefixes.
985 Return correct byte count for orphan fwait with prefixes. Don't
986 print `bound' operands in reverse order.
987 (ckprefix): Stop accumulating prefixes if we get fwait.
988 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
990 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
992 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
993 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
995 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
997 Fix problems when bfd_vma is wider than long.
998 * i386-dis.c: Make op_address and start_pc unsigned.
999 (set_op): Make parameter unsigned.
1000 (print_insn_x86): Cast to bfd_vma when passing a value to
1002 * ns32k-dis.c (CORE_ADDR): Don't define.
1003 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1004 bfd_scan_vma to read back address.
1005 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1007 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1008 (NEXTULONG): New definition.
1009 (print_insn_m68k): Avoid overflow when computing third argument of
1011 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1012 Use disp instead of val to store offset values.
1013 (print_indexed): Use base_disp instead of word to store base
1014 displacement, to avoid overflow.
1015 * m10300-dis.c (disassemble): Cast value to long when computing
1016 pc-relative address, to get correct sign extension.
1018 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1020 * m32r-opc.c: Regenerate.
1022 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1024 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1025 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1027 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1029 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1031 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1033 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1035 (OP_DSreg): Rename from OP_DSSI.
1036 (OP_ESreg): Rename from OP_ESDI.
1037 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1039 (append_seg): Rename from append_prefix.
1040 (ptr_reg): New function.
1041 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1043 (PREFIX_ADDR): Rename from PREFIX_ADR.
1044 (float_reg): Add non-broken opcodes for people who don't want
1047 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1049 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1052 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1054 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1056 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1058 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1059 0; produce error message for shifts of size 32 (or 64 for 64-bit
1060 shifts), because the hardware doesn't support them.
1062 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1064 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1065 LONG_2, LONG_2b formats to use this new operand.
1067 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1069 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1071 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1073 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1074 endian data support.
1076 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1078 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1079 and SHORT_B3b formats to use Rb instead of Ra.
1081 Add FLAG_MUL16 to MUL2XH opcode.
1083 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1084 to existing 1.1.1 parallelisation prohibition procedure.
1086 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1088 * m32r-asm.c,m32r-dis.c: Regenerate.
1090 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1092 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1093 with a shift count of 0.
1095 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1097 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1098 (cgen_hw_lookup_by_num): New function.
1100 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1102 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1104 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1106 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1107 as big-endian on SPARClite.
1109 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1111 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1113 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1115 * po/Make-in (install-info): New target.
1117 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1119 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1120 * configure: Rebuild.
1122 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1124 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1125 variety of ISA2 instructions to set bottom ten bits of trap code.
1127 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1129 * Makefile.am (config.status): Add explicit target so that
1130 config.status depends upon bfd/configure.in.
1131 * Makefile.in: Rebuild.
1133 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1135 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1136 instructions to set bottom ten bits of break code.
1137 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1138 for above optional argument.
1140 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1142 * makefile.vms: Run dec c with /nodebug.
1144 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1146 * Makefile.in: Rebuilt.
1147 * Makefile.am: Regenerated dependencies with mkdep.
1149 * opintl.h (_): Define as dgettext.
1151 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1153 * cgen-asm.c: Internationalised.
1154 * m32r-asm.c: Internationalised.
1155 * m32r-dis.c: Internationalised.
1156 * m32r-opc.c: Internationalised.
1158 * aclocal.m4: Regenerated.
1159 * configure: Regenerated.
1160 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1161 * Makefile.in: Rebuild.
1162 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1163 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1165 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1167 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1169 * aclocal.m4, configure: Rebuild with current tools.
1171 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1173 * opintl.h: New file - contains internationalisation macros used
1174 by source files in this directory.
1175 * po/: New subdirectory - contains internationalisation files.
1176 * po/Make-in: New file - Makefile constructor.
1177 * po/POTFILES.in: New file - list of files in opcodes directory
1178 that should be scan for internationalisation macros.
1179 * po/opcodes.pot: New file - list of internationisation strings
1180 found in files mentioned in po/POTFILES.in.
1181 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1182 entry. Add intl directory to include paths.
1183 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1184 HAVE_STRCPY, HAVE_LC_MESSAGES
1185 * configure.in: Add rule to build Makefile in po subdirectory.
1186 * Makefile.in: Rebuilt.
1187 * aclocal.m4: Rebuilt.
1188 * config.in: Rebuilt.
1189 * configure: Rebuilt.
1190 * alpha-opc.c: Internationalised.
1191 * arc-dis.c: Internationalised.
1192 * arc-opc.c: Internationalised.
1193 * arm-dis.c: Internationalised.
1194 * cgen-asm.c: Internationalised.
1195 * d30v-dis.c: Internationalised.
1196 * dis-buf.c: Internationalised.
1197 * h8300-dis.c: Internationalised.
1198 * h8500-dis.c: Internationalised.
1199 * i386-dis.c: Internationalised.
1200 * m10200-dis.c: Internationalised.
1201 * m10300-dis.c: Internationalised.
1202 * m68k-dis.c: Internationalised.
1203 * m88k-dis.c: Internationalised.
1204 * mips-dis.c: Internationalised.
1205 * ns32k-dis.c: Internationalised.
1206 * opintl.h: Internationalised.
1207 * ppc-opc.c: Internationalised.
1208 * sparc-dis.c: Internationalised.
1209 * v850-dis.c: Internationalised.
1210 * v850-opc.c: Internationalised.
1212 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1214 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1215 (asm_hash_table_entries): New variable.
1216 (cgen_asm_init): Free asm_hash_table_entries.
1217 (hash_insn_array,hash_insn_list): New functions.
1218 (build_asm_hash_table): Use them. Hash macro insns as well.
1219 (cgen_asm_lookup_insn): Update.
1220 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1221 (dis_hash_table_entries): New variable.
1222 (cgen_dis_init): Free dis_hash_table_entries.
1223 (hash_insn_array,hash_insn_list): New functions.
1224 (build_dis_hash_table): Use them. Hash macro insns as well.
1225 (cgen_dis_lookup_insn): Update.
1226 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1227 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1228 (cgen_macro_insn_count): New function.
1229 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1231 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1233 * i386-dis.c (OP_DSSI): Print segment override.
1235 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1237 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1240 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1242 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1243 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1244 * configure.in: Define and substitute WIN32LDFLAGS and
1246 * aclocal.m4: Rebuild with new libtool.
1247 * configure, Makefile.in: Rebuild.
1249 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1251 * m32r-opc.c: Regenerate.
1253 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1255 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1256 before trying to copy it.
1257 * Makefile.in: Rebuild.
1259 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1261 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1263 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1265 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1266 from an arbitrary valid buffer instead of fetching them on demand
1268 (invalid_float): use bit_extract_simple() instead of bit_extract().
1270 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1272 From H.J. Lu <hjl@gnu.org>:
1273 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1276 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1278 * Branched binutils 2.9.
1280 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1282 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1283 disassembling last 4 bytes of a section.
1285 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1287 Fix some gcc -Wall warnings:
1288 * arc-dis.c (print_insn): Add casts to avoid warnings.
1289 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1290 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1291 * m10200-dis.c (disassemble): Likewise.
1292 * m10300-dis.c (disassemble): Likewise.
1293 * ns32k-dis.c (print_insn_ns32k): Likewise.
1294 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1295 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1296 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1297 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1298 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1299 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1300 * tic80-dis.c (print_one_instruction): Likewise.
1301 * w65-dis.c (print_operand): Likewise.
1302 * z8k-dis.c (fetch_data): Likewise.
1303 * a29k-dis.c: Add return type for find_byte_func_type.
1304 * arc-opc.c: Include <stdio.h>. Remove declarations of
1305 insert_multshift and extract_multshift.
1306 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1308 (extract_value): Fully parenthesize expression.
1309 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1310 * h8500-opc.h (h8500_table): Fully bracket initializer.
1311 * w65-opc.h (optable): Likewise.
1312 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1313 * i386-dis.c (OP_E): Initialize local variables.
1314 * m10200-dis.c (print_insn_mn10200): Likewise.
1315 * mips-dis.c (print_insn_mips16): Likewise.
1316 * sh-dis.c (print_insn_shx): Likewise.
1317 * v850-dis.c (print_insn_v850): Likewise.
1318 * ns32k-dis.c (print_insn_arg): Declare.
1319 (get_displacement, invalid_float): Declare.
1320 (list_search, sign_extend, flip_bytes): Declare return type.
1321 (get_displacement): Likewise.
1322 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1324 (print_insn_ns32k): Make i unsigned.
1325 (invalid_float): Make static. Declare type of val.
1326 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1327 on each for iteration.
1328 * tic30-dis.c (get_indirect_operand): Likewise.
1329 * z8k-dis.c (print_insn_z8001): Declare return type.
1330 (print_insn_z8002): Likewise.
1331 (unparse_instr): Fix sprintf format strings.
1333 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1335 * mips-opc.c: Add "sync.l" and "sync.p".
1337 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1339 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1340 default m68k variant to recognize.
1342 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1343 (ctrl, cobr, mem, ea): Likewise.
1344 (print_addr): Likewise. Remove cast.
1345 (ea): Cast argument of print_addr to bfd_vma.
1347 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1349 (cgen_parse_unsigned_integer): Likewise.
1350 (cgen_parse_address): Likewise.
1352 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1354 * i960-dis.c (ctrl): Add full braces to structure initialization.
1355 (cobr, mem, reg): Likewise.
1356 (ea): Correct parenthesization in expression.
1358 * cgen-asm.c: Include <ctype.h>.
1359 (build_asm_hash_table): Remove unused local variable i.
1360 (cgen_parse_keyword): Add casts to avoid warnings.
1362 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1363 symbol. Fix indentation.
1364 (print_insn_little_arm): Likewise.
1366 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1368 * configure.in: Use AM_DISABLE_SHARED.
1369 * aclocal.m4, configure: Rebuild with libtool 1.2.
1371 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1373 These patches are courtesy of Jonathan Walton and Tony Thompson
1374 (athompso@cambridge.arm.com).
1376 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1379 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1380 both the offset and the label closest to the destination.
1382 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1384 * m32r-opc.h: Regenerate.
1386 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1388 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1390 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1392 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1393 assume that info->symbols is non-empty.
1395 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1397 * alpha-opc.c (cvtqs) There is no such thing.
1398 (cvttq): Missing most of the /*d variants.
1400 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1402 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1403 delayed branches or jumps.
1405 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1407 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1409 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1410 * tic30-dis.c (print_branch): Likewise.
1412 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1414 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1415 saved_symbol code as it is no longer needed.
1417 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1419 * cgen-asm.c: Include symcat.h.
1420 * cgen-dis.c,cgen-opc.c: Ditto.
1421 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1423 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1425 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1427 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1429 * m32r-opc.[ch]: Regenerate.
1431 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1433 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1434 arguments. Don't perform validation here.
1435 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1437 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1439 * m32r-opc.c: Regenerate.
1441 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1443 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1444 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1446 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1448 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1450 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1452 * configure.in: Get the version number from BFD.
1453 * configure: Rebuild.
1455 From H.J. Lu <hjl@gnu.org>:
1456 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1457 * Makefile.in: Rebuild.
1459 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1461 * m32r-opc.c: Regenerate.
1462 * m32r-opc.h: Regenerate.
1464 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1466 * m32r-opc.c: Regenerate.
1468 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1470 Fix rac to accept only a0:
1471 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1472 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1473 Introduce OPERAND_GPR.
1474 * d10v-dis.c (print_operand): Likewise.
1476 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1478 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1479 (cgen_hw_lookup): Make result const.
1480 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1482 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1484 * configure, aclocal.m4: Rebuild with new libtool.
1486 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1488 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1489 instructions use a PC relative branch, not absolute.
1491 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1493 * configure.in: Set libtool_enable_shared rather than
1494 libtool_shared. Remove diversion hack.
1495 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1497 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1499 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1500 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1502 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1504 * tic30-dis.c: New file.
1505 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1506 * configure.in: Handle bfd_tic30_arch.
1507 * Makefile.am: Rebuild dependencies.
1508 (CFILES): Add tic30-dis.c
1509 (ALL_MACHINES): Add tic30-dis.lo.
1510 * configure, Makefile.in: Rebuild.
1512 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1514 * m32r-opc.h (HAVE_CPU_M32R): Define.
1516 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1518 * v850-opc.c (insertion routines): If both alignment and size is
1519 wrong then report this.
1521 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1523 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1524 Only recognize instructions for the current target_processor.
1526 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1528 * d10v-dis.c (PC_MASK): Correct value.
1529 (print_operand): If there's a reloc, don't calculate the
1530 address because they could be in different sections.
1532 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1534 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1535 instruction after the 4650's "mul" instruction; nobody's using the
1536 4010 these days. If object files someday indicate which processor
1537 variant they're intended for, we can do a better job at this.
1539 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1541 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1542 table provided entry size. Use CGEN_INSN_MNEMONIC.
1543 (cgen_parse_keyword): Rewrite.
1544 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1545 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1546 * cgen-opc.c: Clean up pass over `struct foo' usage.
1547 (cgen_keyword_lookup_value): Handle "" entry.
1548 (cgen_keyword_add): Likewise.
1550 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1552 * mips-opc.c: Add FP_D to s.d instruction flags.
1554 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1556 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1558 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1560 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1561 PC relative offset forms before the 15 bit forms. An assembler command
1562 line option now chooses the default.
1564 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1566 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1567 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1569 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1571 * configure: Only build libopcodes shared if --enable-shared's value
1572 was `yes', or was set to `*opcodes*'.
1573 * aclocal.m4: Likewise.
1574 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1575 original source of this bit of code. It's not clear what the best fix
1578 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1580 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1581 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1582 offset forms before the 15 bit forms, to default to the long forms.
1584 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1586 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1588 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1590 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1591 symbol if none is present.
1592 (print_insn_big_arm): Prevent examination of stored symbol if
1595 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1597 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1599 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1601 * disassemble.c: Remove disasm_symaddr() function.
1603 * arm-dis.c: Use info->symbol instead of info->flags to determine
1604 if disassmbly should be in Thumb or Arm mode.
1606 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1608 * arm-dis.c: Add support for disassembling Thumb opcodes.
1609 (print_insn_thumb): New function.
1611 * disassemble.c (disasm_symaddr): New function.
1613 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1614 (thumb_opcodes): Table of Thumb opcodes.
1616 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1618 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1620 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1621 and 'v' as operand types.
1623 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1625 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1626 <olivier.carmona@di.epfl.ch>.
1627 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1628 which has a two word opcode with a one word argument.
1630 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1632 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1633 unsigned, not signed.
1634 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1636 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1638 * d10v-dis.c (print_operand):
1639 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1641 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1643 * d10v-opc.c (OPERAND_FLAG): Split into:
1644 (OPERAND_FFLAG, OPERAND_CFLAG) .
1648 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1650 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1651 field for all INSN_MACRO's.
1652 * mips16-opc.c: same
1654 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1656 * mips-opc.c (sync,cache): These are 3900 insns.
1658 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1660 sh-opc.h (sh_table): Remove ftst/nan.
1662 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1664 * mips-opc.c (ffc, ffs): Fix mask.
1666 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1668 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1671 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1673 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1674 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1676 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1678 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1679 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1681 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1683 * v850-dis.c (disassemble): Replace // with /* ... */
1685 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1687 * sparc-opc.c: Add wr & rd for v9a asr's.
1688 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1689 (v9a_asr_reg_names): New variable.
1690 Patch from David Miller <davem@vger.rutgers.edu>.
1692 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1694 * sparc-opc.c (v9notv9a): New insn type.
1695 (IMPDEP): Move to the end to not conflict with edge8 et al.
1696 Patch from David Miller <davem@vger.rutgers.edu>.
1698 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1700 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1702 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1704 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1706 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1708 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1709 of disassemble_info structure to determine if an overlay address
1710 has a matching symbol in low memory.
1712 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1713 new symbol_at_address_func field in disassemble_info structure.
1715 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1717 * v850-opc.c (extract_d22): Use signed arithmatic.
1719 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1721 * mips-opc.c: Three op mult is not an ISA insn.
1723 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1725 * mips-opc.c: Fix formatting.
1727 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1729 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1730 than assuming that char is signed. Explicitly sign extend 16 bit
1731 values, rather than assuming that short is 16 bits.
1732 (OP_sI, OP_J, OP_DIR): Likewise.
1734 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1736 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1739 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1741 * v850-opc.c: Fix typo in comment.
1743 * v850-dis.c (disassemble): Add test of processor type when
1744 determining opcodes.
1746 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1748 * configure.in: Use a diversion to set enable_shared before the
1749 arguments are parsed.
1750 * configure: Rebuild.
1752 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1754 * m68k-opc.c (TBL1): Use ! rather than `.
1755 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1757 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1759 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1761 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1763 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1766 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1767 * aclocal.m4: Rebuild with new libtool.
1768 * configure: Rebuild.
1770 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1772 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1774 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1776 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1778 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1780 * v850-opc.c (v850_opcodes): Further rearrangements.
1782 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1784 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1786 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1788 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1791 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1793 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1795 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1797 * v850-opc.c: Initialise processors field of v850_opcode structure.
1799 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1801 Merge changes from Martin Hunt:
1803 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1805 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1806 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1807 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1809 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1811 * d30v-dis.c (print_insn): First operand of d*i (delayed
1812 branch) instructions is relative.
1814 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1815 (d30v_operand_table): Add IMM6S3 type.
1816 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1818 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1819 and cmp instructions.
1821 * d30v-opc.c: Correct entries for repeat*, and sat*.
1822 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1823 types. Correct several formats.
1825 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1827 * d30v-opc.c (pre_defined_registers): Change control registers.
1829 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1830 SHORT_C2. Manual was incorrect.
1832 * d30v-dis.c (lookup_opcode): Return value now indicates
1833 if an opcode has a short and a long form. Used for deciding
1834 to append a ".s" or ".l".
1835 (print_insn): Append a ".s" to an instruction if it is
1836 the short form and ".l" if it is a long form. Do not append
1837 anything if the instruction has only one possible size.
1839 * d30v-opc.c: Change mulx2h to require an even register.
1840 New form: SHORT_A2; a SHORT_A form that needs an even
1841 register as the first operand.
1843 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1844 instruction was not being disassembled if there were an odd
1845 number of instructions.
1847 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1849 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1851 * v850-dis.c (disassemble): Improved display of register lists.
1853 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1855 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1856 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1857 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1858 fandnot1s, fandnot2s.
1860 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1862 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1864 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1866 * cgen-asm.c (cgen_parse_address): New argument resultp.
1867 All callers updated.
1868 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1870 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1872 * mn10200-dis.c (disassemble): PC relative instructions are
1873 relative to the next instruction, not the current instruction.
1875 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1877 * v850-dis.c (disassemble): Only signed extend values that are not
1878 returned by extract functions.
1879 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1881 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1883 * v850-opc.c: Update comments. Remove use of
1884 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1886 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1888 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1890 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1892 * configure: Rebuilt with latest devo autoconf for NT support.
1894 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1896 * v850-dis.c (disassemble): Use curly brace syntax for register
1899 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1900 where r0 is being used as a destination register.
1902 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1904 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1906 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1908 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1910 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1912 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1913 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1916 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1918 * configure (cgen_files): Add support for v850e target.
1919 * configure.in (cgen_files): Add support for v850e target.
1921 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1923 * configure (cgen_files): Add support for v850ea target.
1924 * configure.in (cgen_files): Add support for v850ea target.
1926 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1928 * configure.in (bfd_arc_arch): Add.
1929 * configure: Rebuild.
1930 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1931 * Makefile.in: Rebuild.
1932 * arc-dis.c, arc-opc.c: New files.
1933 * disassemble.c (ARCH_all): Define ARCH_arc.
1934 (disassembler): Add ARC support.
1936 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1938 * v850-dis.c (disassemble): Add support for v850EA instructions.
1940 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1941 (v850_opcodes): Add v850EA instructions.
1943 * v850-dis.c (disassemble): Add support for v850E instructions.
1945 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1946 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1947 insert_spe, extract_spe): New Functions.
1948 (v850_opcodes): Add v850E instructions.
1950 * v850-opc.c: Reorganised and re-layed out to improve readability
1953 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1955 * configure: Rebuild with autoconf 2.12.1.
1957 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1959 * aclocal.m4, configure: Rebuild with new automake patches.
1961 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1963 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1964 * acinclude.m4: Just include acinclude.m4 from BFD.
1965 * aclocal.m4, configure: Rebuild.
1967 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1969 * Makefile.am: New file, based on old Makefile.in.
1970 * acconfig.h: New file.
1971 * acinclude.m4: New file.
1972 * stamp-h.in: New file.
1973 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1974 Removed shared library handling; now handled by libtool. Replace
1975 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1976 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1977 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1978 handling in AC_OUTPUT.
1979 * dep-in.sed: Change .o to .lo.
1980 * Makefile.in: Now built with automake.
1981 * aclocal.m4: Now built with aclocal.
1982 * config.in, configure: Rebuild.
1984 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1986 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1988 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1990 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1992 * sparc-dis.c (sorted_opcodes): New static local.
1993 (struct opcode_hash): `opcode' is pointer to const element.
1994 (build_hash): First arg is now table of sorted pointers.
1995 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1996 (compare_opcodes): Update.
1998 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2000 * cgen-opc.c: #include <ctype.h>.
2001 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2002 Handle case insensitive hashing.
2003 (hash_keyword_value): Change type of `value' to unsigned int.
2005 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2007 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2008 precision FP, mark it as such. Likewise for double precision
2009 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2012 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2014 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2016 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2017 nesting depth when all the macros are expanded.
2019 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2021 * sparc-opc.c: The fcmp v9a instructions take an integer register
2022 as a destination, not a floating point register. From Christian
2023 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2025 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2027 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2028 syntax. From Roman Hodek
2029 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2031 * i386-dis.c (twobyte_has_modrm): Fix pand.
2033 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2035 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2037 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2039 * arm-dis.c: Add prototypes for arm_decode_shift and
2042 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2044 * mips-opc.c: Add r3900 insns.
2046 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2048 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2049 print delay slot instructions on the same line. When using a PC
2050 relative load, add a comment with the value being loaded if it can
2053 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2055 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2056 to pushS/popS for segment regs and byte constant so that
2057 pushw/popw printed when in 16 bit data mode.
2059 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2060 print cbtw, cwtd in 16 bit data mode.
2061 * i386-dis.c (putop): extra case W to support above.
2063 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2064 address size prefix in 16 bit address mode.
2066 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2068 * sh-dis.c: Reindent. Rename local variable fprintf to
2071 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2073 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2075 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2077 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2079 * mips16-opc.c (mip16_opcodes): same.
2081 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2083 * m68k-opc.c (moveb): Change $d to %d.
2085 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2087 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2088 (twobyte_has_modrm): Likewise.
2090 (OP_MMX, OP_EM, OP_MS): New static functions.
2092 * i386-dis.c: Revert patch of April 4. The output now matches
2095 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2097 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2100 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2102 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2104 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2106 * Makefile.in (install): Depend upon installdirs.
2107 (installdirs): New target.
2109 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2111 From Thomas Graichen <graichen@rzpd.de>:
2112 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2113 * configure: Rebuild.
2115 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2117 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2118 Delete string{,s}.h support.
2120 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2122 * cgen-asm.c (cgen_parse_operand_fn): New global.
2123 (cgen_parse_{{,un}signed_integer,address}): Update call to
2124 cgen_parse_operand_fn.
2125 (cgen_init_parse_operand): New function.
2126 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2127 from cgen_asm_init_parse.
2128 (m32r_cgen_assemble_insn): New operand `errmsg'.
2129 Delete call to as_bad, return error message to caller.
2130 (m32r_cgen_asm_hash_keywords): #if 0 out.
2132 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2134 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2136 [case 'J']: Fix typo in register name.
2138 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2140 * configure.in: Substitute SHLIB_LIBS.
2141 * configure: Rebuild.
2142 * Makefile.in (SHLIB_LIBS): New variable.
2143 ($(SHLIB)): Use $(SHLIB_LIBS).
2145 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2147 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2149 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2151 * disassemble.c (disassembler): Handle m32r.
2153 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2155 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2156 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2157 * Makefile.in (CFILES): Add them.
2158 (ALL_MACHINES): Add them.
2159 (dependencies): Regenerate.
2160 * configure.in (cgen_files): New variable.
2161 (bfd_m32r_arch): Add entry.
2162 * configure: Regenerate.
2164 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2166 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2167 * configure: Rebuild.
2169 * Makefile.in: Rebuild dependencies.
2171 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2173 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2176 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2178 * Branched binutils 2.8.
2180 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2182 * m10200-dis.c: Rename from mn10200-dis.c.
2183 * m10200-opc.c: Rename from mn10200-opc.c.
2184 * m10300-dis.c: Rename from mn10300-dis.c
2185 * m10300-opc.c: Rename from mn10300-opc.c.
2186 * Makefile.in: Update accordingly.
2188 * mips16-opc.c: Add mul and dmul macros.
2190 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2192 * makefile.vms: Update CFLAGS, add clean target.
2194 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2196 * mips-opc.c: Add "wait". From Ralf Baechle
2197 <ralf@gnu.ai.mit.edu>.
2199 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2200 * configure, config.in: Rebuild.
2201 * sysdep.h: Include <stdlib.h> if it exists.
2202 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2204 * Makefile.in: Rebuild dependencies.
2206 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2208 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2209 Andrew Bray <andy@madhouse.demon.co.uk>.
2211 * mips-opc.c: Add cast when setting mips_opcodes.
2213 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2215 * v850-dis.c (disassemble): Fix sign extension problem.
2216 * v850-opc.c (extract_d*): Fix sign extension problems to make
2217 disassembly calculate branch offsets correctly.
2219 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2221 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2223 * mips-opc.c: Add dctr and dctw.
2225 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2227 * d30v-dis.c (print_insn): Change the way signed constants
2230 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2232 * Makefile.in (BFD_H): New variable.
2233 (HFILES): New variable.
2234 (CFILES): Add all C files.
2235 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2236 Delete old dependencies, and build new ones.
2237 * dep-in.sed: New file.
2239 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2241 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2243 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2245 * mn10200-opc.c: Change "trap" to "syscall".
2246 * mn10300-opc.c: Add new "syscall" instruction.
2248 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2250 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2251 mulul insns on the coldfire.
2253 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2255 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2256 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2257 (print_insn_little_arm): Likewise.
2259 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2261 Based on patches from H.J. Lu <hjl@lucon.org>:
2262 * i386-dis.c (fetch_data): Add prototype.
2263 * m68k-dis.c (fetch_data): Add prototype.
2264 (dummy_print_address): Add prototype. Make static.
2265 * ppc-opc.c (valid_bo): Add prototype.
2266 * sparc-dis.c (build_hash_table): Add prototype.
2267 (is_delayed_branch, compute_arch_mask): Add prototypes.
2268 (print_insn_sparc): Make several local variables const.
2269 (compare_opcodes): Change arguments to const PTR. Add prototype.
2270 * sparc-opc.c (arg): Change name field to be const.
2271 (lookup_name, lookup_value): Add prototypes. Change table and
2272 name parameters to be const.
2273 (sparc_encode_asi): Change name parameter to be const.
2274 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2275 (sparc_encode_sparclet_cpreg): Likewise.
2276 (sparc_decode_asi): Change return type to be const.
2277 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2278 (sparc_decode_sparclet_cpreg): Likewise.
2280 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2282 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2283 Solaris doesn't like the combined options, and the -f is
2285 (stamp-tshlink, install): Likewise.
2287 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2289 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2292 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2294 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2296 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2298 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2301 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2303 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2305 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2307 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2309 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2311 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2313 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2315 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2316 floatformat_to_double to make portable.
2317 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2320 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2322 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2323 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2325 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2327 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2328 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2330 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2332 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2333 (OFF_SL_BR_SCALED): ... to this, and added the flag
2334 TIC80_OPERAND_BASEREL to the flags word.
2335 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2338 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2340 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2341 Change mips_opcodes from const array to a pointer,
2342 and change bfd_mips_num_opcodes from const int to int,
2343 so that we can increase the size of the mips opcodes table
2346 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2348 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2349 store BITNUM values in the table in one's complement form
2350 to match behavior when assembler is given a raw numeric
2351 value for a BITNUM operand.
2352 * tic80-dis.c (print_operand_bitnum): Ditto.
2354 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2356 * d30v-opc.c: Removed references to FLAG_X.
2358 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2360 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2362 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2364 * Makefile.in: Added d30v object files.
2365 * configure: (bfd_d30v_arch) Rebuilt.
2366 * configure.in: (bfd_d30v_arch) Added new case.
2367 * d30v-dis.c: New file.
2368 * d30v-opc.c: New file.
2369 * disassemble.c (disassembler) Add entry for d30v.
2371 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2373 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2374 representations for the floating point BITNUM values.
2376 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2378 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2379 in the table in one's complement form, as they appear in the
2381 (tic80_symbol_to_value): Use macros to access predefined
2383 (tic80_value_to_symbol): Ditto.
2384 (tic80_next_predefined_symbol): New function.
2385 * tic80-dis.c (print_operand_bitnum): Remove code that did
2386 one's complement for BITNUM values.
2388 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2390 * makefile.vms: Remove 8 bit characters. Update to latest
2393 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2395 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2397 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2399 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2400 (IMM24_PCREL): Likewise.
2402 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2404 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2405 address for an extended PC relative instruction that is not a
2408 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2410 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2413 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2415 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2416 (tic80_opcodes): Sort entries so that long immediate forms
2417 come after short immediate forms, making it easier for
2418 assembler to select the right one for a given operand.
2420 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2422 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2424 (print_insn_mips16): Likewise.
2426 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2428 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2429 a symbol class that restricts translation to just that
2430 class (general register, condition code, etc).
2432 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2434 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2435 and REG_DEST_E for register operands that have to be
2436 an even numbered register. Add REG_FPA for operands that
2437 are one of the floating point accumulator registers.
2438 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2439 (tic80_opcodes): Change entries that need even numbered
2440 register operands to use the new operand table entries.
2441 Add "or" entries that are identical to "or.tt" entries.
2443 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2445 * mips16-opc.c: Add new cases of exit instruction for
2447 * mips-dis.c (print_mips16_insn_arg): Display floating point
2448 registers in operands of exit instruction. Print `$' before
2449 register names in operands of entry and exit instructions.
2451 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2453 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2454 pairs for all predefined symbols recognized by the assembler.
2455 Also used by the disassembling routines.
2456 (tic80_symbol_to_value): New function.
2457 (tic80_value_to_symbol): New function.
2458 * tic80-dis.c (print_operand_control_register,
2459 print_operand_condition_code, print_operand_bitnum):
2460 Remove private tables and use tic80_value_to_symbol function.
2462 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2464 * d10v-dis.c (print_operand): Change address printing
2465 to correctly handle PC wrapping. Fixes PR11490.
2467 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2469 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2472 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2474 * mips-dis.c (print_insn_mips16): Set insn_info information.
2475 (print_mips16_insn_arg): Likewise.
2477 * mips-dis.c (print_insn_mips16): Better handling of an extend
2478 opcode followed by an instruction which can not be extended.
2480 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2482 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2483 coldfire moveb instruction to not allow an address register as
2484 destination. Although the documentation does not indicate that
2485 this is invalid, experiments uncovered unexpected behavior.
2486 Added a comment explaining the situation. Thanks to Andreas
2487 Schwab for pointing this out to me.
2489 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2491 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2492 entries are presorted so that entries with the same mnemonic are
2493 adjacent to each other in the table. Sort the entries for each
2494 instruction so that this is true.
2496 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2498 * m68k-dis.c: Include <libiberty.h>.
2499 (print_insn_m68k): Sort the opcode table on the most significant
2500 nibble of the opcode.
2502 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2504 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2505 "vsub", "vst", "xnor", and "xor" instructions.
2506 (V_a1): Renamed from V_a, msb of accumulator reg number.
2507 (V_a0): Add macro, lsb of accumulator reg number.
2509 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2511 * tic80-dis.c (print_insn_tic80): Broke excessively long
2512 function up into several smaller ones and arranged for
2513 the instruction printing function to be callable recursively
2514 to print vector instructions that have both a load and a
2515 math instruction packed into a single opcode.
2516 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2517 to explain why it comes after the other vector opcodes.
2519 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2521 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2522 move insns to handle immediate operands.
2524 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2526 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2527 fix operand mask in the "moveml" entries for the coldfire.
2529 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2531 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2532 New macros for building vector instruction opcodes.
2533 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2534 FMT_LI, which were unused. The field is now a flags field.
2535 Remove some opcodes that are possible, but illegal, such
2536 as long immediate instructions with doubles for immediate
2537 values. Add "vadd" and "vld" instructions.
2539 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2541 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2542 the order more logical. Move the shift alias instructions ("rotl",
2543 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2544 interspersed with the regular sr.x and sl.x instructions. Add
2545 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2546 "sub", "subu", "swcr", and "trap".
2548 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2550 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2551 (OFF_SL_PC): Renamed from OFF_SL.
2552 (OFF_SS_BR): New operand type for base relative operand.
2553 (OFF_SL_BR): New operand type for base relative operand.
2554 (REG_BASE): New operand type for base register operand.
2555 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2556 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2557 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2559 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2560 10 char field, padded with spaces on rhs, rather than a string
2561 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2562 than old TIC80_OPERAND_RELATIVE. Add support for new
2563 TIC80_OPERAND_BASEREL flag bit.
2565 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2567 * tic80-dis.c (print_insn_tic80): Print floating point operands
2569 * tic80-opc.c (SPFI): Add single precision floating point
2570 immediate operand type.
2571 (ROTATE): Add rotate operand type for shifts.
2572 (ENDMASK): Add for shifts.
2573 (n): Macro for the 'n' bit.
2574 (i): Macro for the 'i' bit.
2575 (PD): Macro for the 'PD' field.
2576 (P2): Macro for the 'P2' field.
2577 (P1): Macro for the 'P1' field.
2578 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2581 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2583 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2584 adding in current address for pc-relative operands.
2586 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2588 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2589 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2590 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2591 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2592 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2593 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2594 (REG_SCALED, LSI_SCALED): New operand types.
2595 (E): New macro for 'E' bit at bit 27.
2596 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2597 opcodes, including the various size flavors (b,h,w,d) for
2598 the direct load and store instructions.
2600 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2602 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2604 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2605 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2606 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2607 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2608 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2609 masks with "MASK_* & ~M_*" to get the M bit reset.
2610 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2612 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2614 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2615 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2616 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2618 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2619 CC, SICR, and LICR table entries.
2620 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2621 "bcnd", and "brcr" opcodes.
2623 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2625 * ppc-opc.c (powerpc_operands): Make comment match the
2626 actual fields (no shift field).
2627 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2628 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2629 partial implementation, work in progress.
2630 * tic80-opc.c (tic80_operands): Begin construction operands table.
2631 (tic80_opcodes): Continue populating opcodes table and start
2632 filling in the operand indices.
2633 (tic80_num_opcodes): Add this.
2635 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2637 * m68k-opc.c: Add #B case for moveq.
2639 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2641 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2642 before they are used.
2644 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2646 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2647 for "breakpoint" instruction.
2649 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2651 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2652 (dep): Use ALL_CFLAGS rather than CFLAGS.
2654 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2656 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2659 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2661 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2662 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2664 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2666 * mips16-opc.c: Add "abs".
2668 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2670 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2671 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2672 (disassembler): Add bfd_arch_tic80 support to set disassemble
2673 to print_insn_tic80.
2674 * tic80-dis.c (print_insn_tic80): Add stub.
2676 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2678 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2679 * configure: Regenerate with autoconf.
2680 * tic80-dis.c: Add file.
2681 * tic80-opc.c: Add file.
2683 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2685 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2687 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2689 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2690 (mn10200_opcodes): Use it for some logicals and btst insns.
2691 Add "break" and "trap" instructions.
2693 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2695 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2697 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2699 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2700 relative load or add now depends upon whether the instruction is
2703 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2705 * mn10200-dis.c: Finish writing disassembler.
2706 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2707 Fix mask for "jmp (an)".
2709 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2710 handle endianness issues for mn10300.
2712 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2714 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2716 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2717 instruction. Fix opcode field for "movb (imm24),dn".
2719 * mn10200-opc.c (mn10200_operands): Fix insertion position
2722 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2724 * mn10200-opc.c: Create mn10200 opcode table.
2725 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2726 but moving along nicely.
2728 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2730 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2732 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2734 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2735 specifiers for fmovem* instructions.
2737 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2739 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2741 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2743 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2746 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2748 * mn10300-opc.c: Add some comments explaining the various
2751 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2753 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2755 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2758 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2759 operand specifiers in fmovm* instructions.
2761 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2763 * ppc-opc.c (insert_li): Give an error if the offset has the two
2764 least significant bits set.
2766 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2768 * mips-dis.c (print_insn_mips16): Separate the instruction from
2769 the arguments with a tab, not a space.
2771 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2773 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2776 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2779 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2781 * configure: Rebuild with autoconf 2.12.
2783 Add support for mips16 (16 bit MIPS implementation):
2784 * mips16-opc.c: New file.
2785 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2786 (mips16_reg_names): New static array.
2787 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2788 after seeing a 16 bit symbol.
2789 (print_insn_little_mips): Likewise.
2790 (print_insn_mips16): New static function.
2791 (print_mips16_insn_arg): New static function.
2792 * mips-opc.c: Add jalx instruction.
2793 * Makefile.in (mips16-opc.o): New target.
2794 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2795 * configure: Rebuild.
2797 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2799 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2800 operand specifiers in *save, *restore and movem* instructions.
2802 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2805 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2806 register operands for immediate arithmetic, not, neg, negx, and
2807 set according to condition instructions.
2809 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2810 specifier of the effective-address operand in immediate forms of
2811 arithmetic instructions. The specifier for the immediate operand
2812 notes how and where the constant will be stored.
2814 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2816 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2819 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2822 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2824 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2826 * mn10300-dis.c (disassemble): Handle register lists.
2828 * mn10300-opc.c: Fix handling of register list operand for
2829 "call", "ret", and "rets" instructions.
2831 * mn10300-dis.c (disassemble): Print PC-relative and memory
2832 addresses symbolically if possible.
2833 * mn10300-opc.c: Distinguish between absolute memory addresses,
2834 pc-relative offsets & random immediates.
2836 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2838 (disassemble): Handle SPLIT and EXTENDED operands.
2840 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2842 * mn10300-dis.c: Rough cut at printing some operands.
2844 * mn10300-dis.c: Start working on disassembler support.
2845 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2847 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2849 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2851 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2853 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2855 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2857 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2858 register argument is calls and jmp instructions.
2860 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2862 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2863 getx operand. Fix opcode for mulqu imm,dn.
2865 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2867 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2868 in MN10300_OPERAND_SPLIT operands for how many bits
2869 appear in the basic insn word. Add IMM32_HIGH24,
2870 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2871 (mn10300_opcodes): Use new operands as needed.
2873 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2874 for bset, bclr, btst instructions.
2875 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2877 * mn10300-opc.c (mn10300_operands): Remove many redundant
2878 operands. Update opcode table as appropriate.
2879 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2880 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2882 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2884 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2885 operands (for indexed load/stores). Fix bitpos for DI
2886 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2887 few instructions that insert immediates/displacements in the
2888 middle of the instruction. Add IMM8E for 8 bit immediate in
2889 the extended part of an instruction.
2890 (mn10300_operands): Use new opcodes as appropriate.
2892 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2894 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2895 sequential so the assembler never parallelizes it with
2898 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2900 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2901 a data/address register that appears in register field 0
2902 and register field 1.
2903 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2905 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2907 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2908 standard disassembly.
2910 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2911 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2912 Recategorize PALcode instructions.
2914 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2916 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2918 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2920 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2921 there are no operand types.
2923 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2925 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2927 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2929 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2931 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2933 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2935 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2936 and sst.w instructions.
2938 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2941 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2943 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2946 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2948 * ppc-opc.c (PPCPWR2): Define.
2949 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2952 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2954 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2955 field for movhu instruction.
2957 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2958 cast value to "long" not "signed long" to keep hpux10
2961 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2963 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2966 * mn10300-opc.c (FMT*): Remove definitions.
2968 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2969 for shift-by-register opcodes.
2971 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2972 into [AD][MN][01] for encoding the position of the register
2975 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2977 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2978 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2980 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2982 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2983 Fix various typos. Add "PAREN" operand.
2984 (MEM, MEM2): Define.
2985 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2986 operands. Fix several typos.
2988 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2991 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2993 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2994 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2996 (mn10300_opcodes): Break opcode format out into its own field.
2997 Update many operand fields to deal with signed vs unsigned
2998 issues. Fix one or two typos in the "mov" instruction
2999 opcode, mask and/or operand fields.
3001 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3003 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3004 m68851 wasn't reset.
3006 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3008 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3009 all opcodes. Very rough cut at operands for all opcodes.
3011 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3014 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3016 * mn10200-opc.c, mn10300-opc.c: New files.
3017 * mn10200-dis.c, mn10300-dis.c: New files.
3018 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3019 * disassemble.c: Break mn10x00 support into 10200 and 10300
3021 * configure.in: Likewise.
3022 * configure: Rebuilt.
3024 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3026 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3028 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3030 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3032 * disassemble (ARCH_mn10x00): Define.
3033 (disassembler): Handle bfd_arch_mn10x00.
3034 * configure.in: Recognize bfd_mn10x00_arch.
3035 * configure: Rebuilt.
3037 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3039 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3040 accordingly. Don't declare functions using op_rtn.
3042 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3044 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3045 params to be more standard.
3046 * (disassemble): Print absolute addresses and symbolic names for
3047 branch and jump targets.
3048 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3050 * (v850_opcodes): Add breakpoint insn.
3052 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3054 * m68k-opc.c: Move the fmovemx data register cases before the
3055 other cases, so that they get recognized before the data register
3056 does gets treated as a degenerate register list.
3058 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3060 * mips-opc.c: Add a case for "div" and "divu" with two registers
3061 and a destination of $0.
3063 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3065 * mips-dis.c (print_insn_arg): Add prototype.
3066 (_print_insn_mips): Ditto.
3068 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3070 * mips-dis.c (print_insn_arg): Print condition code registers as
3073 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3075 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3077 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3079 * v850-dis.c (disassemble): Make static. Provide prototype.
3081 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3083 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3086 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3088 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3089 ']' characters into the output stream.
3090 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3091 Add "memop" field to all opcodes (for the disassembler).
3092 Reorder opcodes so that "nop" comes before "mov" and "jr"
3093 comes before "jarl".
3095 * v850-dis.c (print_insn_v850): Fix typo in last change.
3097 * v850-dis.c (print_insn_v850): Properly handle disassembling
3098 a two byte insn at the end of a memory region when the memory
3099 region's size is only two byte aligned.
3101 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3103 * v850-dis.c (v850_reg_names): Define.
3104 (v850_sreg_names, v850_cc_names): Likewise.
3105 (disassemble): Very rough cut at printing operands (unformatted).
3107 * v850-opc.c (BOP_MASK): Fix.
3108 (v850_opcodes): Fix mask for jarl and jr.
3110 * v850-dis.c: New file. Skeleton for disassembler support.
3111 * Makefile.in Remove v850 references, they're not needed here.
3112 * configure.in: Add v850-dis.o when building v850 toolchains.
3113 * configure: Rebuilt.
3114 * disassemble.c (disassembler): Call v850 disassembler.
3116 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3117 (insert_d8_6, extract_d8_6): New functions.
3118 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3119 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3121 (IF4A, IF4B): Use "D7" instead of "D7S".
3122 (IF4C, IF4D): Use "D8_7" instead of "D8".
3123 (IF4E, IF4F): New. Use "D8_6".
3124 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3125 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3127 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3128 (v850_operands): Change D16 to D16_15, use special insert/extract
3129 routines. New new D16 that uses the generic insert/extract code.
3130 (IF7A, IF7B): Use D16_15.
3131 (IF7C, IF7D): New. Use D16.
3132 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3134 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3135 message. Issue an error if the branch offset is odd.
3137 * v850-opc.c: Add notes about needing special insert/extract
3138 for all the load/store insns, except "ld.b" and "st.b".
3140 * v850-opc.c (insert_d22, extract_d22): New functions.
3141 (v850_operands): Use insert_d22 and extract_d22 for
3143 (insert_d9): Fix range check.
3145 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3147 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3148 and set bits field to D9 and D22 operands.
3150 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3152 * v850-opc.c (v850_operands): Define SR2 operand.
3153 (v850_opcodes): "ldsr" uses R1,SR2.
3155 * v850-opc.c (v850_opcodes): Fix opcode specs for
3156 sld.w, sst.b, sst.h, sst.w, and nop.
3158 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3160 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3161 end of the opcode table.
3163 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3165 * d10v-opc.c (pre_defined_registers): Added register pairs,
3166 "r0-r1", "r2-r3", etc.
3168 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3170 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3171 Create I16U for an unsigned 16bit mmediate operand.
3172 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3174 * v850-opc.c (v850_operands): Define EP operand.
3175 (IF4A, IF4B, IF4C, IF4D): Use EP.
3177 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3178 with immediate operand, "movhi". Tweak "ldsr".
3180 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3181 correct. Get sld.[bhw] and sst.[bhw] closer.
3183 * v850-opc.c (v850_operands): "not" is a two byte insn
3185 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3187 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3189 * v850-opc.c (two): Get order of words correct.
3191 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3193 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3194 register source and destination operands.
3195 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3197 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3198 same thinko in "trap" opcode.
3200 * v850-opc.c (v850_opcodes): Add initializer for size field
3203 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3204 Add D8 for 8-bit unsigned field in short load/store insns.
3205 (IF4A, IF4D): These both need two registers.
3206 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3207 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3208 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3209 for "ldsr" and "stsr".
3210 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3213 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3214 short store word (sst.w).
3216 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3218 * v850-opc.c (v850_operands): Added insert and extract fields,
3219 pointers to functions that handle unusual operand encodings.
3221 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3223 * v850-opc.c (v850_opcodes): Enable "trap".
3225 * v850-opc.c (v850_opcodes): Fix order of displacement
3226 and register for "set1", "clr1", "not1", and "tst1".
3228 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3230 * v850-opc.c (v850_operands): Add "B3" support.
3231 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3234 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3236 * v850-opc.c: Close unterminated comment.
3238 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3240 * v850-opc.c (v850_operands): Add flags field.
3241 (v850_opcodes): add move opcodes.
3243 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3245 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3246 * configure: (bfd_v850v_arch) Add new case.
3247 * configure.in: (bfd_v850_arch) Add new case.
3248 * v850-opc.c: New file.
3250 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3252 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3254 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3256 * d10v-opc.c: Add additional information to the opcode
3257 table to help determinine which instructions can be done
3260 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3262 * mpw-make.sed: Update editing of include pathnames to be
3265 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3267 * arm-opc.h: Added "bx" instruction definition.
3269 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3271 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3273 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3275 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3277 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3279 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3281 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3283 * makefile.vms: Update for alpha-opc changes.
3285 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3287 * i386-dis.c (print_insn_i386): Actually return the correct value.
3288 (ONE, OP_ONE): #ifdef out; not used.
3290 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3292 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3293 Changed subi operand type to treat 0 as 16.
3295 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3297 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3300 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3302 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3303 memory transfer instructions. Add new format string entries %h and %s.
3304 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3307 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3309 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3310 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3312 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3314 * alpha-dis.c (print_insn_alpha_osf): Remove.
3315 (print_insn_alpha_vms): Remove.
3316 (print_insn_alpha): Make globally visible. Chose the register
3317 names based on info->flavour.
3318 * disassemble.c: Always return print_insn_alpha for the alpha.
3320 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3322 * d10v-dis.c (dis_long): Handle unknown opcodes.
3324 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3326 * d10v-opc.c: Changes to support signed and unsigned numbers.
3327 All instructions with the same name that have long and short forms
3328 now end in ".l" or ".s". Divs added.
3329 * d10v-dis.c: Changes to support signed and unsigned numbers.
3331 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3333 * d10v-dis.c: Change all functions to use info->print_address_func.
3335 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3337 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3338 move ccr/sr insns more strict so that the disassembler only
3339 selects them when the addressing mode is data register.
3341 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3342 * d10v-opc.c (pre_defined_registers): Declare.
3343 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3344 to pick a better name for the registers.
3346 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3348 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3349 operands for fexpand and fpmerge. From Christian Kuehnke
3350 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3352 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3354 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3355 print routine. Take new regnames and cpumask arguments.
3356 Kill the environment variable nonsense.
3357 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3358 (print_insn_alpha_vms): New function. Do VMS style regnames.
3359 * disassemble.c (disassembler): Test bfd flavour to pick
3360 between OSF and VMS routines. Default to OSF.
3362 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3364 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3365 * configure: Rebuild.
3366 * Makefile.in (install): Use @INSTALL_SHLIB@.
3368 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3370 * configure: (bfd_d10v_arch) Add new case.
3371 * configure.in: (bfd_d10v_arch) Add new case.
3372 * d10v-dis.c: New file.
3373 * d10v-opc.c: New file.
3374 * disassemble.c (disassembler) Add entry for d10v.
3376 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3378 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3379 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3381 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3383 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3384 distinguish between variants of the instruction set.
3385 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3386 distinguish between variants of the instruction set.
3388 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3390 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3391 the 8086 instruction set.
3392 * i386-dis.c: General cleanups. Make most things static. Add
3393 prototypes. Get rid of static variables aflags and dflags. Pass
3394 them as args (to almost everything).
3396 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3398 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3400 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3402 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3403 if the next arg is marked with SRC_IN_DST. Gross.
3405 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3406 we're looking for and find EXR.
3408 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3409 if we're looking for KBIT and we don't find it.
3411 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3414 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3415 3bit immediate operands.
3417 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3419 * Released binutils 2.7.
3421 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3422 <kkaempf@progis.ac-net.de>.
3424 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3426 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3428 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3430 * sparc-dis.c (print_insn_sparclite): New routine to print
3431 sparclite instructions.
3433 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3435 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3437 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3439 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3440 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3441 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3443 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3445 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3446 Use autoconf-set values.
3447 (docdir, oldincludedir): Removed.
3448 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3450 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3452 * alpha-opc.c: New file.
3453 * alpha-opc.h: Remove.
3454 * alpha-dis.c: Complete rewrite to use new opcode table.
3455 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3456 * configure: Rebuild with autoconf 2.10.
3457 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3458 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3460 (alpha-opc.o): New target.
3462 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3464 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3465 Set imm_added_to_rs1 even if the source and destination register
3468 * sparc-opc.c: Add some two operand forms of the wr instruction.
3470 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3472 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3475 * disassemble.c (disassembler): Handle H8/S.
3476 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3478 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3480 * sparc-opc.c: Add beq/teq as aliases for be/te.
3482 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3483 <sergei@msil.sps.mot.com>.
3485 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3487 * makefile.vms: New file.
3489 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3491 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3493 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3496 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3498 * i386-dis.c (OP_OFF): Call append_prefix.
3500 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3502 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3503 unsigned long to silence a warning from the Solaris PowerPC
3506 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3508 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3510 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3512 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3514 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3515 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3516 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3517 cpush, cpusha, cpull sparclet insns.
3519 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3521 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3523 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3525 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3526 Set F_FLOAT on other floating point instructions.
3528 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3530 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3532 (powerpc_opcodes): Add 860/821 specific SPRs.
3534 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3536 * configure.in: Permit --enable-shared to specify a list of
3537 directories. Set and substitute BFD_PICLIST.
3538 * configure: Rebuild.
3539 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3540 uses. Set to @BFD_PICLIST@.
3542 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3544 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3545 not "abs", which may be needed for the absolute in something
3546 like btst #0,@10:8. Print L_3 immediates separately from other
3547 immediates. Change ABSMOV reference to ABS8MEM.
3549 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3551 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3552 (current_arch_mask): New static global.
3553 (compute_arch_mask): New static function.
3554 (print_insn_sparc): Delete sparc_v9_p. New static local
3555 current_mach. Resort opcode table if current_mach changes.
3556 Generalize "insn not supported" test.
3557 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3558 Delete test for v9/!v9.
3559 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3561 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3562 (brfcx): Renamed to FBRX.
3563 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3564 coprocessor mnemonics are not supported on the sparclet).
3565 (condf): Renamed to CONDF.
3566 (SLCBCC2): Delete F_ALIAS flag.
3568 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3570 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3571 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3573 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3575 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3576 that the shared library version number is set correctly.
3578 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3580 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3581 Miles Bader <miles@gnu.ai.mit.edu>.
3582 * configure: Rebuild.
3584 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3586 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3589 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3591 * configure: Rebuild with autoconf 2.8.
3593 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3595 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3596 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3598 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3600 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3601 since they appear as targets in Makefile.in.
3602 * configure: Rebuild.
3604 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3606 * mpw-make.sed: Edit out shared library support bits.
3608 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3610 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3611 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3612 (sparc_opcodes): Add sparclet insns.
3613 (sparclet_cpreg_table): New static local.
3614 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3615 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3617 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3619 * i386-dis.c (index16): New static variable.
3620 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3622 (OP_indirE): Return result of OP_E.
3623 (OP_E): Check for 16 bit addressing mode, and disassemble
3624 correctly. Optimised 32 bit case a little. Don't print
3625 "(base,index,scale)" when sib specifies only an offset.
3627 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3629 * configure.in: Set and substitute SHLIB_DEP.
3630 * configure: Rebuild.
3631 * Makefile.in (SHLIB_DEP): New variable.
3632 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3633 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3634 COMMON_SHLIB, add them to piclist with appropriate modifications.
3635 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3636 here: just use piclist.
3638 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3640 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3641 (print_insn_sparc): Rewrite v9/not-v9 tests.
3642 (compare_opcodes): Likewise.
3643 * sparc-opc.c (MASK_<ARCH>): Define.
3644 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3645 (sparclet,v6notv9): Define.
3646 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3647 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3649 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3651 * configure.in: Call AC_PROG_CC before configure.host.
3652 * configure: Rebuild.
3654 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3656 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3658 * i386-dis.c (onebyte_has_modrm): New static array.
3659 (twobyte_has_modrm): New static array.
3660 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3662 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3664 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3667 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3669 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3672 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3674 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3675 m68010up, not just m68020up | cpu32.
3677 * Makefile.in (SONAME): New variable.
3678 ($(SHLINK)): Make a link to the transformed name, as well.
3679 (stamp-tshlink): New target.
3680 (install): Skip stamp-tshlink during install.
3682 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3684 * configure.in: Call AC_ARG_PROGRAM.
3685 * configure: Rebuild.
3686 * Makefile.in (program_transform_name): New variable.
3687 (install): Transform library name before installing it.
3689 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3691 * i960-dis.c (mem): Add HX dcinva instruction.
3693 Support for building as a shared library, based on patches from
3694 Alan Modra <alan@spri.levels.unisa.edu.au>:
3695 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3696 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3697 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3698 * configure: Rebuild.
3699 * Makefile.in (ALLLIBS): New variable.
3700 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3701 (COMMON_SHLIB, SHLINK): New variables.
3702 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3703 (STAGESTUFF): Remove variable.
3704 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3705 (stamp-piclist, piclist): New targets.
3706 ($(SHLIB), $(SHLINK)): New targets.
3707 ($(OFILES)): Depend upon stamp-picdir.
3708 (disassemble.o): Build twice if PICFLAG is set.
3709 (MOSTLYCLEAN): Add pic/*.o.
3710 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3711 (distclean): Remove pic and stamp-picdir.
3712 (install): Install shared libraries.
3713 (stamp-picdir): New target.
3715 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3717 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3718 Print unknown instruction as "unknown", rather than in hex.
3720 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3722 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3724 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3726 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3728 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3730 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3731 when necessary. From Ulrich Drepper
3732 <drepper@myware.rz.uni-karlsruhe.de>.
3734 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3736 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3737 sparc_num_opcodes. Update architecture enum values.
3738 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3739 (sparc_opcode_lookup_arch): New function.
3740 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3741 (sparc_opcodes): Add v9a shutdown insn.
3743 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3745 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3746 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3748 (print_insn_sparc64): Deleted.
3749 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3752 * sparc-opc.c (architecture_pname): Add v9a.
3754 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3756 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3757 incorrectly defined as 0x16 when it should be 0x15.
3758 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3759 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3760 excb (exception barrier) which is defined in the Alpha
3761 Architecture Handbook version 2.
3762 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3763 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3764 disassembled as or, for example.
3766 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3768 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3769 (_print_insn_mips): Change i from int to unsigned int.
3771 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3773 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3774 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3776 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3778 * i386-dis.c: Added Pentium Pro instructions.
3780 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3782 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3785 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3787 * sh-opc.h (sh_nibble_type): Added REG_B.
3788 (sh_arg_type): Added A_REG_B.
3789 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3791 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3793 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3795 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3797 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3799 * Makefile.in (distclean): Remove stamp-h. From Ronald
3800 F. Guilmette <rfg@monkeys.com>.
3802 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3804 From David Mosberger-Tang <davidm@azstarnet.com>:
3805 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3808 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3810 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3811 (sh_table): Added many SH3 opcodes.
3812 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3814 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3816 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3817 (subco,subco.): Mark this PPC, not PPCCOM.
3819 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3821 * configure: Rebuild with autoconf 2.7.
3823 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3825 * configure: Rebuild with autoconf 2.6.
3827 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3829 * configure.in: Sort list of architectures. Accept but do nothing
3830 for alliant, convex, pyramid, romp, and tahoe.
3832 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3834 * a29k-dis.c (print_special): Change num to unsigned int.
3836 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3838 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3841 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3843 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3844 * configure: Rebuilt.
3846 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3848 * configure.in: Add case for bfd_i860_arch.
3849 * configure: Rebuild.
3851 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3853 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3854 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3855 (NEXTDOUBLE): Likewise.
3856 (print_insn_m68k): Don't match fmoveml if there is more than one
3857 register in the list.
3858 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3860 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3862 * m68k-opc.c: Use #W rather than #w.
3863 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3865 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3867 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3868 and likewise for all the dbxx opcodes.
3870 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3872 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3874 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3876 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3877 the VR4100 specific instructions to the mips_opcodes structure.
3879 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3881 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3882 ugly Metrowerks bug in CW6, is fixed in CW7.
3884 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3886 * ppc-opc.c (whole file): Add flags for common/any support.
3888 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3890 * Makefile.in (BISON): Remove macro.
3891 (FLAGS_TO_PASS): Remove BISON.
3893 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3895 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3897 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3898 instructions that take no args by looking at the match mask.
3899 (print_insn_arg): Always print "%" before register names.
3900 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3901 [case '_']: Don't print "@#" before address.
3902 [case 'J']: Use "%s" as format string, not register name.
3903 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3905 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3907 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3910 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3912 From David Mosberger-Tang <davidm@azstarnet.com>
3914 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3915 (alpha_insn_set): added definitions for VAX floating point
3916 instructions (Unix compilers don't generate these, but handcoded
3917 assembly might still use them).
3919 * alpha-dis.c (print_insn_alpha): added support for disassembling
3920 the miscellaneous instructions in the Alpha instruction set.
3922 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3924 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3925 no longer create sysdep.h, sed ppc-opc.c to work around a
3926 serious Metrowerks C bug.
3927 * mpw-make.in: Remove.
3928 * mpw-make.sed: New file, used by mpw-configure to edit
3929 Makefile.in into an MPW makefile.
3931 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3933 * Makefile.in (maintainer-clean): New synonym for realclean.
3935 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3937 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3938 which use '0', '1', and '2' instead. Specify the proper size for
3939 a pmove immediate operand. Correct the pmovefd patterns to be
3940 moves to a register, not from a register.
3941 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3943 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3945 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3946 %psr, %wim, %tbr as F_NOTV9.
3948 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3950 * Makefile.in (Makefile): Just rebuild Makefile when running
3952 (config.h, stamp-h): New targets.
3953 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3954 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3955 rebuilding config.h.
3956 * configure: Rebuild.
3958 * mips-opc.c: Change unaligned loads and stores with "t,A"
3959 operands to use "t,A(b)".
3961 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3963 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3965 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3967 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3968 until 3 instead of until 2.
3970 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3972 * Makefile.in (ALL_CFLAGS): Define.
3973 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3974 (MOSTLYCLEAN): Add config.log.
3975 (distclean): Don't remove config.log.
3976 * configure.in: Substitute HDEFINES.
3977 * configure: Rebuild.
3979 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3981 * sh-opc.h (sh_arg_type): Add F_FR0.
3982 (sh_table, case fmac): Add F_FR0 as first argument.
3984 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3986 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3988 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3990 * sparc-dis.c: Remove all references to NO_V9.
3992 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3994 * aclocal.m4: Just include ../bfd/aclocal.m4.
3995 * configure: Rebuild.
3997 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3999 * sparc-dis.c (X_DISP19): Define.
4000 (print_insn, case 'G'): Use it.
4001 (print_insn, case 'L'): Sign extend displacement.
4003 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4005 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4006 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4007 host_makefile_frag or frags.
4008 * aclocal.m4: New file.
4009 * configure: Rebuild.
4010 * Makefile.in (INSTALL): Set to @INSTALL@.
4011 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4012 (INSTALL_DATA): Set to @INSTALL_DATA@.
4014 (AR_FLAGS): Set to rc rather than qc.
4015 (CC): Define as @CC@.
4016 (CFLAGS): Set to @CFLAGS@.
4017 (@host_makefile_frag@): Remove.
4018 (config.status): Remove dependency upon @frags@.
4020 * configure.in: ../bfd/config.bfd now just sets shell variables.
4021 Use them rather than looking through target Makefile fragments.
4022 * configure: Rebuild.
4024 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4026 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4028 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4030 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4031 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4034 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4035 (lookup_{name,value}): New functions.
4036 (prefetch_table): New static local.
4037 (sparc_{encode,decode}_prefetch): New functions.
4038 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4040 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4042 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4045 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4047 * sh-dis.c: Correct comment on first line of file.
4049 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4051 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4053 * sparc-opc.c (asi, membar): New static locals.
4054 (sparc_{encode,decode}_{asi,membar}): New functions.
4055 (sparc_opcodes, membar insn): Fix.
4056 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4057 Support decoding of membar masks.
4060 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4062 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4064 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4066 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4067 and likewise for the other branches. Add bhs as an alias for bcc,
4068 and likewise for the size variants. Add dbhs as an alias for
4071 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4073 * sh-opc.h (FP sts instructions): Update to match reality.
4075 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4077 * m68k-dis.c: (fpcr_names): Add % before all register names.
4078 (reg_names): Likewise.
4079 (print_insn_arg): Don't explicitly print % before register names.
4080 Add % before register names in static array names. In case 'r',
4081 print data registers as `@(Dn)', not `Dn@'. When printing a
4082 memory address, don't print @# before it.
4083 (print_indexed): Change base_disp and outer_disp from int to
4084 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4085 syntax. Sign extend 8 byte displacement correctly.
4086 (print_base): Print using MIT syntax. Print zpc when appropriate.
4087 Change parameter disp from int to bfd_vma.
4089 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4092 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4094 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4095 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4096 * sh-opc.h (sh_arg_type): Add new operand types.
4097 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4099 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4101 * Makefile.in (distclean): Remove generated file config.h.
4103 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4105 * Makefile.in (distclean): Remove generated file config.h.
4107 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4109 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4111 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4113 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4114 rather than numopcodes. Use m68k_opcodes rather than removed
4115 opcode function. Don't check F_ALIAS.
4116 (print_insn_arg): Change first parameter to be const char *.
4117 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4118 (m68k-opc.o): New target.
4119 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4120 * configure: Rebuild.
4122 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4124 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4125 (opcode_bits, opcode_hash_table): New variables.
4126 (opcodes_initialized): Renamed from opcodes_sorted.
4127 (build_hash_table): New function.
4128 (is_delayed_branch): Use hash table.
4129 (print_insn): Renamed from print_insn_sparc, made static.
4130 Build and use hash table. If !sparc64, ignore sparc64 insns,
4131 and vice-versa if sparc64.
4132 (print_insn_sparc, print_insn_sparc64): New functions.
4133 (compare_opcodes): Move sparc64 opcodes to end.
4134 Print commutative insns with constant second.
4135 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4137 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4139 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4140 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4141 avoids printing a delay slot in a delay slot.
4142 * sh-opc.h (sh_table): Fully bracket last entry.
4144 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4146 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4148 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4150 * configure.in: Get host_makefile_frag from ${srcdir}.
4152 * configure.in: Autoconfiscated. Check for string[s].h. Create
4153 config.h from config.in. Don't set up sysdep.h link.
4154 * sysdep.h: New file.
4155 * configure, config.in: New files, generated from configure.in.
4156 * Makefile.in: Updated to be processed autoconf-style.
4157 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4158 (Makefile): Depend on config.status.
4159 (config.status): New rule.
4160 * configure.bat: Update Makefile substitutions.
4162 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4164 * mips-opc.c (L1): Define.
4165 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4166 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4169 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4171 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4172 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4173 have multiple add units but only a single logical unit.
4175 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4176 shifted by 18, without any insertion or extraction function.
4177 (insert_cr, extract_cr): Remove.
4179 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4181 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4184 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4186 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4187 * sh-opc.h: Add copyright.
4189 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4191 * Makefile.in (crunch-m68k): Delete extra target accidentally
4192 checked in a while ago.
4194 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4196 * sh-opc.h (sh_table): Add SH3 support.
4198 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4200 * sh-opc.h: Added bsrf and braf.
4202 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4204 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4205 bogus [ls]fm{ea,fd} patterns.
4207 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4208 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4209 initialize it from memory. Make function static.
4210 (print_insn_{big,little}_arm): New functions.
4211 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4212 the correct endianness.
4214 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4216 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4219 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4221 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4222 17th, so that it builds again using GCC as the compiler.
4224 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4226 * mips-dis.c (print_insn_little_mips): Cast return value from
4227 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4228 expects an unsigned long, and that might be fewer words of
4229 argument storage (e.g., if bfd_vma is long long on a 32-bit
4231 (print_insn_big_mips): Likewise with bfd_getb32 value.
4232 (_print_insn_mips): Now static.
4234 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4236 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4237 gcc memory hog problem with initializer is fixed.
4239 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4241 Merge in support for Mac MPW as a host.
4242 (Old change descriptions retained for informational value.)
4244 * mpw-config.in (archname): Compute from the config.
4245 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4247 * mpw-config.in (target_arch): Compute from canonical target.
4248 (m68k, mips, powerpc, sparc): Add architectures.
4249 * mpw-make.in (disassemble.c.o): Add.
4250 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4252 * mpw-config.in (BFD_MACHINES): Set to a default value.
4253 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4255 * mpw-make.in (CSEARCH): Add extra-include to search path.
4257 * mpw-config.in (varargs.h): Don't create.
4258 (sysdep.h): Create using forward-include.
4259 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4261 * mpw-config.in: New file, MPW version of configure.in.
4262 * mpw-make.in: New file, MPW version of Makefile.in.
4264 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4266 * alpha-dis.c (print_insn_alpha): Put empty statement after
4269 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4271 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4272 (low_sign_extend): Likewise.
4273 (get_field): Delete unused function.
4274 (set_field, deposit_14, deposit_21): Likewise.
4276 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4278 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4281 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4283 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4285 * alpha-opc.h (OSF_ASMCODE): define
4286 print pal-code names as defined in App C of the
4287 Alpha Architecture Reference Manual
4289 * alpha-dis.c: cleaned up output
4290 print stylized code forms as defined in App A.4.3 of the
4291 Alpha Architecture Reference Manual
4293 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4295 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4297 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4300 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4302 * m68k-dis.c (opcode): New function. Returns address of opcode
4303 table entry given index, even if the opcode table was split to
4304 work around gcc bugs.
4305 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4307 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4308 (reg_names): Now const.
4309 (print_insn_arg): Arrays cacheFieldName and names now const.
4310 (print_indexed): Array scales now const.
4312 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4314 * ppc-opc.c: Sort recently added instructions by minor opcode
4315 number within major opcode number.
4317 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4319 * hppa-dis.c: Include libhppa.h.
4321 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4323 * mips-opc.c: Change dli to use M_DLI, and add dla.
4325 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4327 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4329 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4331 * mips-opc.c: Add r4650 mul instruction.
4333 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4335 * mips-opc.c: Add uld and usd macros for unaligned double load and
4338 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4340 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4341 mfdcr, mtdcr, icbt, iccci.
4343 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4345 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4346 signed char fields to shorts, more portable.
4348 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4350 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4351 char fields as signed chars, since they may have negative values.
4353 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4355 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4356 (mycroft@netbsd.org).
4358 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4360 From "Logg, Ed" <elogg@ea.com>:
4361 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4362 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4365 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4367 * ppc-opc.c: Changes based on patch from David Edelsohn
4368 <edelsohn@mhpcc.edu>.
4369 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4372 (insert_tbr): New static function.
4373 (extract_tbr): New static function.
4374 (XFXFXM_MASK, XFXM): Define.
4375 (XSPRBAT_MASK, XSPRG_MASK): Define.
4376 (powerpc_opcodes): Add instructions to access special registers by
4377 name. Add mtcr and mftbu.
4379 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4381 * mips-opc.c (P3): Define.
4382 (mips_opcodes): Add mad and madu.
4384 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4386 * configure.in: Add W65 support.
4387 * disassemble.c: Likewise.
4388 * w65-opc.h, w65-dis.c: New files.
4390 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4392 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4395 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4397 * mips-opc.c: Add dli as a synonym for li.
4399 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4401 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4402 print something for reserved opcode values, even if it won't
4405 * mips-dis.c (_print_insn_mips): When initializing, shift right
4406 and mask, to avoid sign extension problems on the Alpha.
4408 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4411 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4413 * sh-opc.h (mov.l gbr): Get direction right.
4414 * sh-dis.c (print_insn_shx): New function.
4415 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4416 print opcodes with right byte order.
4418 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4420 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4421 to avoid conflicts with getopt.
4423 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4425 * hppa-dis.c (print_insn_hppa): Read the instruction using
4426 bfd_getb32, so that it works on a little endian or 64 bit host.
4427 Remove unused local variable op.
4429 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4431 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4432 addu does not work correctly if -mips3.
4434 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4436 * a29k-dis.c (print_special): Add special register names defined
4437 on 29030, 29040 and 29050.
4438 (print_insn): Handle new operand type 'I'.
4440 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4442 * Makefile.in (INSTALL): Use top level install.sh script.
4444 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4446 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4447 that it works on a little endian host.
4449 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4451 * configure.in: Use ${config_shell} when running config.bfd.
4453 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4455 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4457 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4459 * a29k-dis.c (print_insn): Print the opcode.
4461 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4463 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4465 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4467 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4469 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4471 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4472 which store a value into memory.
4474 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4476 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4477 * arm-dis.c, arm-opc.h: New files.
4479 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4481 * Makefile.in (ns32k-dis.o): Add dependency.
4482 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4483 string, not as array of chars.
4485 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4487 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4489 * sparc-opc.c: Added sparclite extended FP operations, and
4490 versions of v9 impdep* instructions permitting specification of
4493 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4495 * i960-dis.c (reg_names): Now const.
4496 (struct sparse_tabent): New type, copied from array type in mem
4498 (ctrl): Local static array ctrl_tab now const.
4499 (cobr): Local static array cobr_tab now const.
4500 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4501 static variable mem_tab no longer explicitly initialized. Changed
4502 mem_init to const array of struct sparse_tabent.
4503 (reg): Local static variable reg_tab no longer explicitly
4504 initialized. Changed reg_init to const array of struct
4506 (ea): Local static array scale_tab now const.
4508 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4511 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4513 * configure.bat: the disassember needs to be enabled for
4514 "objdump -d" to work in djgpp.
4516 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4518 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4519 (invalid_float): Enabled general version, doesn't require running
4520 on ns32k host. Changed to take char* argument, and test for
4521 explicitly specified sizes, instead of using sizeof() on host CPU
4523 (INVALID_FLOAT): Cast first argument.
4524 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4525 list_P032, list_M032): Now const.
4526 (optlist, list_search): Made appropriate arguments now point to
4528 (print_insn_arg): Changed static array of one-character-string
4529 pointers into a static const array of characters; fixed sprintf
4530 statement accordingly.
4532 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4534 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4535 from distribution. A ns32k-dis.c from a previous distribution has
4536 been brought up to date and supports the new interface.
4538 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4540 * configure.in: add bfd_ns32k_arch target support.
4542 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4543 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4545 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4547 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4550 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4552 * h8300-dis.c, mips-dis.c: Don't use true and false.
4554 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4556 * configure.in: Change --with-targets to --enable-targets.
4558 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4560 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4561 opcodes to the first instruction with that opcode, to speed
4562 disassembly of large files. From ralphc@pyramid.com (Ralph
4565 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4567 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4569 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4571 * configure.bat: update to latest makefile.in
4573 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4575 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4576 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4577 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4578 slot insn is in a delay slot.
4579 * z8k-opc.h: (resflg): Fix patterns.
4580 * h8500-opc.h Fix CR insn patterns.
4582 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4584 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4585 "cmpl" before POWER versions, so that gas -many uses them.
4587 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4589 * disassemble.c: New file.
4590 * Makefile.in (OFILES): Add disassemble.o.
4591 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4592 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4593 binutils/configure.in.
4595 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4596 opcode being examined.
4598 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4600 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4601 (insert_ral, insert_ram, insert_ras): New functions.
4602 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4603 RAS for store with update.
4605 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4607 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4608 (edelsohn@npac.syr.edu).
4610 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4612 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4615 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4617 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4619 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4621 * ppc-opc.c (powerpc_operands): The signedp field has been
4622 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4623 instead. Add new operand SISIGNOPT.
4624 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4625 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4626 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4629 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4631 * i386-dis.c (struct private): Renamed to dis_private. `private'
4632 is a reserved word for dynix cc.
4634 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4636 * configure.in: Change error message to refer to bfd/config.bfd
4637 rather than bfd/configure.in.
4639 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4641 * ppc-opc.c: Define POWER2 as short alias flag.
4642 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4645 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4647 * i960-dis.c (print_insn_i960): Don't read a second word for
4648 opcodes 0, 1, 2 and 3.
4650 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4652 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4654 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4656 * m68881-ext.c: Removed; no longer used.
4657 * Makefile.in: Changed accordingly.
4659 * m68k-dis.c (ext_format_68881): Don't declare.
4660 (print_insn_m68k): If an instruction uses place 'i', it uses at
4661 least four fixed bytes.
4662 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4663 extended float, convert to double using floatformat_to_double, not
4664 ieee_extended_to_double, and fetch the data before converting it.
4666 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4668 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4669 davidj@ICSI.Berkeley.EDU (David Johnson).
4671 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4673 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4674 PowerPC uses bdnz[l][a].
4676 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4678 * dis-buf.c, i386-dis.c: Include sysdep.h.
4680 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4682 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4684 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4685 by Motorola PowerPC 601 with PPC_OPCODE_601.
4686 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4687 Disassemble Motorola PowerPC 601 instructions as well as normal
4688 PowerPC instructions.
4690 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4692 * i960-dis.c (reg, mem): Just use a static array instead of
4695 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4697 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4698 condition name index if this is for a negated condition.
4700 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4701 Floating point format for 'H' operand is backwards from normal
4702 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4703 operands (fmpyadd and fmpysub), handle bizarre register
4704 translation correctly for single precision format.
4706 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4707 or 'I' operands if the next format specifier is 'M' (fcmp
4708 condition completer).
4710 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4712 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4713 single number giving a bitmask for the MB and ME fields of an M
4714 form instruction. Change NB to accept 32, and turn it into 0;
4715 also turn 0 into 32 when disassembling. Seperated SH from NB.
4716 (insert_mbe, extract_mbe): New functions.
4717 (insert_nb, extract_nb): New functions.
4718 (SC_MASK): Mask out SA and LK bits.
4719 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4720 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4721 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4722 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4723 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4724 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4725 (powerpc_macros): Define table of macro definitions.
4726 (powerpc_num_macros): Define.
4728 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4729 if PPC_OPERAND_NEXT is set.
4731 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4733 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4734 char. Retrieve contents using bfd_getl32 instead of shifting.
4736 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4738 * ppc-opc.c: New file. Opcode table for PowerPC, including
4739 opcodes for POWER (RS/6000).
4740 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4741 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4742 (CFILES): Add ppc-dis.c.
4743 (ppc-dis.o, ppc-opc.o): New targets.
4744 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4746 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4748 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4749 No space before 'u', 'f', or 'N'.
4751 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4753 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4754 farther than we should.
4756 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4758 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4760 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4762 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4764 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4765 needs it, to prevent reading past the end of a section.
4767 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4769 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4770 Removed t,A case for la; always use t,A(b) case.
4772 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4774 From Ted Lemen <mellon@pepper.ncd.com>
4775 * mips-dis.c (print_insn_arg): Handle 'k'.
4776 * mips-opc.c: Make cache use k, not t.
4778 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4780 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4781 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4782 FLOAT_FORMAT_CODE to put out floating point register names.
4784 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4786 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4788 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4790 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4792 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4794 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4795 larger than 32. Moved dsxx32 variants first for disassembler.
4797 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4799 * z8kgen.c, z8k-opc.h: Add full lda information.
4801 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4803 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4804 movb instructions. Any necessary space will be emitted by
4805 the code to handle nullification completers.
4807 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4809 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4811 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4813 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4814 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4816 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4818 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4820 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4822 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4823 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4825 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4827 * m88k-dis.c (m88kdis): comment change. Remove space after
4829 (printop): handle new arg types DEC and XREG for m88110.
4831 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4833 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4834 type for absolute branch addresses. Delete special
4835 "ble" and "be" code in 'W' operand code.
4837 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4839 * mips-opc.c: Set hazard information correctly for branch
4840 likely instructions.
4842 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4844 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4845 info->fprintf_func for printing and info->print_address_func for
4848 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4850 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4852 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4854 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4855 Corrected second case of "b" for disassembler.
4857 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4859 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4860 to BFD swapping routines to correspond to BFD name changes.
4862 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4864 * mips-opc.c: Change div machine instruction to be z,s,t rather
4865 than s,t. Change div macro to be d,v,t rather than d,s,t.
4866 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4867 rem and remu which generates only the corresponding div
4868 instruction. This is for compatibility with the MIPS assembler,
4869 which only generates the simple machine instruction when an
4870 explicit destination of $0 is used.
4871 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4873 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4875 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4876 WR_31 hazard for bal, bgezal, bltzal.
4878 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4880 * hppa-dis.c (print_insn_hppa): Use print function
4881 from within the disassemble_info, not fprintf_filtered.
4883 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4885 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4886 Law, law@cs.utah.edu.)
4888 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4890 * mips-opc.c ("absu"): Removed.
4893 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4895 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4896 Changed hazard information to distinguish between memory load
4897 delays and coprocessor load delays.
4899 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4901 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4903 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4905 * configure.in: Don't pass cpu to config.bfd.
4907 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4909 * m88k-dis.c (m88kdis): Make class unsigned.
4911 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4913 * alpha-dis.c (print_insn_alpha): One branch format case was
4914 missing the instruction name.
4916 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4918 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4919 Add the arch-specific auxiliary files.
4920 (OFILES): Remove the arch-specific auxiliary files
4921 and use BFD_MACHINES instead of DIS_LIBS.
4922 * configure.in: Set BFD_MACHINES based on --with-targets option.
4924 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4926 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4929 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4931 * sparc-opc.c: Change CONST to const to deal with gcc
4932 -Dconst=__const -traditional.
4934 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4936 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4937 coprocessor instructions out of #if 0, and made them use new
4940 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4942 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4944 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4946 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4947 instruction, for use by the disassembler.
4949 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4950 hand-coded sign extensions that depended on 32-bit host ints.
4951 FIXME, we still depend on big-endian host bitfield ordering.
4952 (sparc_print_insn): Set the insn_info_valid field, and the
4953 other fields that describe the instruction being printed.
4955 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4957 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4958 `jmp' instead of just one of them.
4960 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4962 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4963 (fput_fp_reg_r): Renamed from fput_reg_r.
4964 (fput_fp_reg): New function.
4965 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4967 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4969 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4971 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4973 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4975 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4976 don't output a space.
4978 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4980 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4982 * mips-opc.c: New file, containing opcode table from
4983 ../include/opcode/mips.h.
4984 * Makefile.in: Add it.
4986 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4988 * m88k-dis.c: New file, moved in from gdb and changed to use the
4989 new dis-asm.h disassembler interface.
4990 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4991 (m88k-dis.o): New target.
4993 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4995 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4996 argument string const char * to correspond to opcode/mips.h.
4998 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5000 * mips-dis.c: Updated to account for name changes in new version
5002 * Makefile.in: Added header file dependencies.
5004 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5006 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5008 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5010 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5011 extend, rather than shifts.
5013 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5015 * Makefile.in: Undo 15 June change.
5017 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5019 * m68k-dis.c (print_insn_arg): Change return value to byte count
5021 * m68k-dis.c: Re-write to detect invalid operands before
5022 printing anything, so we can handle this the same way we
5023 handle invalid opcodes.
5025 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5027 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5029 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5031 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5034 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5036 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5038 * configure.in: Do make sysdep.h link.
5039 * Makefile.in: Search ../include. Don't search ../bfd.
5041 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5043 Changes from Jeff Law, law@cs.utah.edu:
5044 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5045 Do not print a space before the completers specified by
5048 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5050 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5051 defined, since gdb has been fixed.
5053 Changes from Jeff Law, law@cs.utah.edu:
5054 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5055 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5056 be a *disassemble_info, not a *FILE.
5057 * hppa-dis.c: Support 'd', '!', and 'a'.
5058 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5059 * hppa-dis.c: Delete cases which are no longer needed.
5061 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5063 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5065 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5067 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5070 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5072 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5073 * configure.in: No longer need to configure to get sysdep.h.
5075 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5077 * Patches from Jeffrey Law <law@cs.utah.edu>.
5078 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5079 templates for 1.1 FP computational instructions.
5081 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5083 * h8500-dis.c (print_insn_h8500): Address argument is type
5085 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5088 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5089 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5091 * sparc-dis.c (compare_opcodes): Move static declaration to
5094 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5096 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5097 instruction, remove unimp hack from 'l' argument.
5099 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5101 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5104 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5106 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5107 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5110 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5112 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5113 arrays of string pointers to 2-d arrays of chars, to save
5116 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5118 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5119 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5121 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5123 * hppa-dis.c: New file from Utah, adapted to new disassembler
5125 * Makefile.in: Include it.
5127 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5129 * sh-dis.c, sh-opc.h: New files.
5131 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5133 * alpha-dis.c, alpha-opc.h: New files.
5135 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5137 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5140 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5142 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5144 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5146 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5149 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5151 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5152 and double percent signs a few places.
5154 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5156 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5157 Use info->print_address_func not print_address.
5159 * dis-buf.c (generic_print_address): New function.
5161 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5163 * Makefile.in: Add sparc-dis.c.
5164 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5166 Add `add' instruction to the set that get checked
5167 for a preceding `sethi' in order to print an absolute address.
5168 * (print_insn): Disassembly prefers real instructions.
5169 (is_delayed_branch): Speed up.
5170 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5171 Still missing some float ops, and needs testing.
5172 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5173 F_ALIAS. Use printf, not fprintf, when not passing a file
5175 (compare_opcodes): Check that identical instructions have
5176 identical opcodes, complain otherwise.
5179 * Include reg_names.
5181 Use dis-asm.h/read_memory_func interface.
5183 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5185 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5186 deliberately return non-zero to setjmp from longjmp. Otherwise
5187 this code fails to compile.
5189 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5191 * m68k-dis.c: Fix prototype for fetch_arg().
5193 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5195 * dis-buf.c: New file, for new read_memory_func interface.
5196 Makefile.in (OFILES): Include it.
5197 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5198 Use new read_memory_func interface.
5200 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5202 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5203 * h8500-opc.h: Fix couple of opcodes.
5205 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5207 * Makefile.in: add dvi & installcheck targets
5209 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5211 * Makefile.in: Update for h8500-dis.c.
5213 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5215 * h8500-dis.c, h8500-opc.h: New files
5217 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5219 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5220 ../include/dis-asm.h.
5221 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5222 and ../gdb/m68k-pinsn.c).
5223 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5224 and ../gdb/i386-pinsn.c).
5225 * m68881-ext.c: New file. Moved definition of
5226 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5227 * Makefile.in: Adjust for new files.
5228 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5229 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5230 can be dis-assembled.
5232 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5234 * mips-dis.c (print_insn_arg): Now returns void.
5236 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5238 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5239 files that use the macros.
5241 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5243 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5244 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5245 (CFILES): Added mips-dis.c.
5247 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5249 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5250 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5252 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5254 * Makefile.in: Improve *clean rules.
5255 * configure.in: Allow a default host.
5257 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5259 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5260 files include other sysdep files
5262 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5264 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5266 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5268 * configure.in: For host support, use ../bfd/configure.host
5269 so it stays in sync with the ../bfd/hosts database.
5271 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5273 * configure.in: use cpu-vendor-os triple instead of nested cases
5275 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5277 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5278 *always* the wrong one.
5280 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5282 * z8kgen.c: added copyright info
5284 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5286 * z8k-dis.c (unparse_instr): prettier tabs
5287 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5289 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5291 * configure.in: Add ncr* configuration.
5292 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5293 picayune ANSI compilers happy.
5295 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5297 * configure.in (i386): Make i386 and i486 synonymous for now.
5298 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5300 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5302 * Makefile.in (install): Fix typo.
5304 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5306 * Makefile.in (make): Remove obsolete crud.
5307 (sparc-opc.o): Avoid Sun Make VPATH bug.
5309 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5311 * Makefile.in: since there are no SUBDIRS, remove rule and
5312 references of subdir_do.
5314 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5316 * Makefile.in (install): Get the library name right here too.
5317 Don't install bfd.h, since it's unrelated to this library. No
5318 subdirs to recurse into, either.
5319 (CFILES): The source file has a .c suffix, not .o.
5321 * sparc-opc.c: New file, moved from BFD.
5322 * Makefile.in (OFILES): Build it.
5324 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5326 * z8k-dis.c: fixed forward refferences of some declarations.
5328 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5330 * Makefile.in: get the name of the library right
5332 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5334 * z8k-dis.c: knows how to disassemble z8k stuff
5335 * z8k-opc.h: new file full of z8000 opcodes
5339 version-control: never