2 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
4 * po/opcodes.pot: Regenerated.
5 * fr30-opc.c: Regenerated.
6 * fr30-opc.h: Regenerated.
7 * fr30-dis.c: Regenerated.
8 * fr30-asm.c: Regenerated.
10 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
12 * disassemble.c (disassembler): Add support for FR30 target.
15 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
18 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
19 CGEN_OPERAND_SEM_ONLY.
21 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
23 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
25 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
27 * po/opcodes.pot: Regenerate.
28 * po/POTFILES.in: Regenerate.
29 * fr30-opc.c: Regenerate.
30 * fr30-opc.h: Regenerate.
32 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
34 * m32r-asm.c: Regenerate.
37 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
39 * configure.in: Added case for bfd_fr30_arch.
40 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
41 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
42 (CLEANFILES): Added stamp-fr30.
44 * fr30-asm.c: New file.
45 * fr30-dis.c: New file.
46 * fr30-opc.c: New file.
47 * fr30-opc.h: New file.
48 * po/POTFILES.in: Regenerated
49 * po/opcodes.pot: Regenerated
53 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
55 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
56 to bcl8,bncl8 entries.
57 (macro_insn_table_entries): Add FILL_SLOT attribute
58 to bcl8r,bncl8r entries.
61 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
63 * configure.in: detect cygwin* instead of cygwin32*
64 * configure: regenerate
66 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
68 * mips-opc.c (IS_M): Added.
71 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
73 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
77 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
80 * cgen-asm.in (insert_1): New function.
81 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
82 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
83 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
84 * cgen-dis.in (extract_1): New function.
85 (extract_normal): buf_ctrl renamed to ex_info, update type.
86 Progress on handling of CGEN_INT_INSN_P.
87 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
88 Update handling of CGEN_INT_INSN_P. Handle errors from
89 @arch@_cgen_extract_operand.
90 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
91 (default_print_insn): Renamed from print_insn.
92 Handle ! CGEN_INT_INSN_P.
93 (print_insn_@arch@): Handle error returns from print_insn.
94 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
95 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
96 (@arch@_cgen_lookup_get_insn_operands): Ditto.
98 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
101 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
103 * m10300-opc.c: Allow autoincrement stores using the same register
104 for source and destination operands.
106 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
108 * m10300-opc.c: DSP instrutions which only write to one general
109 register have no restrictions on matching operands.
111 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
114 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
116 * m32r-opc.h,m32r-opc.c: Regenerate.
119 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
121 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
124 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
126 * i386-dis.c (OP_3DNowSuffix): New static function.
129 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
130 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
131 (insn_codep): New static variable.
132 (print_insn_x86): Init insn_codep after prefixes.
133 (grps): Add GRP14 entries for prefetch, prefetchw.
136 From Jeff B Epler <jepler@usgs.gov>
137 * i386-dis.c (Suffix3DNow): New table.
139 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
141 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
143 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
145 * d10v-dis.c (print_operand): If num is nonzero, then
146 add OPERAND_ACC1, not OPERAND_ACC0.
148 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
150 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
153 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
155 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
159 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
161 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
164 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
166 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
168 start-sanitize-nortel-ppc750
169 1998-09-09 Michael Meissner <meissner@cygnus.com>
171 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
174 end-sanitize-nortel-ppc750
175 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
177 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
179 (print_insn_little_arm): Detect Thumb symbols in elf object
182 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
184 * alpha-dis.c (print_insn_alpha): Use the machine type to
185 decide which PALcode set to include.
187 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
189 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
191 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
193 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
194 MSUB and MSUBS instructions.
197 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
199 * mips-opc.c: Insert contents of vu0.h, rather than including it.
201 * Makefile.am: Rebuild dependencies.
205 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
207 * ppc-opc.c (powerpc_operands): Omit parens around additions in
210 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
212 start-sanitize-coldfire
213 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
214 ColdFire, as below for mulsl and mulul.
216 end-sanitize-coldfire
217 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
218 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
219 +, -, and d for ColdFire.
221 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
222 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
223 (extract_mbe): Likewise.
225 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
227 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
229 * m10300-opc.c: First cut at UDF instructions.
231 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
233 * m32r-opc.c: Regenerate (remove semantic descriptions).
235 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
237 * arm-dis.c (print_insn_big_arm): Fix indentation.
238 (print_insn_little_arm): Likewise.
240 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
242 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
244 (print_insn_little_arm): Likewise.
246 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
248 Move all global state data into opcode table struct, and treat
249 opcode table as something that is "opened/closed".
250 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
251 (cgen_asm_init): Delete.
252 (cgen_set_parse_operand_fn): New function.
253 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
254 (cgen_dis_init): Delete.
255 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
256 (cgen_current_{opcode_table_mach,endian}): Delete.
257 start-sanitize-cygnus
258 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
259 * cgen-dis.in (all fns): Ditto.
260 * cgen-opc.in (all fns): Ditto.
262 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
264 start-sanitize-cygnus
265 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
267 * cgen-dis.in (print_normal): Split into two.
268 (print_address): New function.
269 (extract_insn_normal): Clarify insn_value arg.
270 (print_int_insn): Renamed from print_insn.
271 (print_insn): New arg.
272 (print_insn_@arch@): Open opcode table if not already done so.
273 Move reading of insn into print_insn.
276 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
278 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
282 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
284 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
285 accept an accumulator choice.
286 * m32r-opc.c,m32r-opc.h: Regenerate.
289 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
291 * m10300-opc.c: Add entries for "no_match_operands" field in
295 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
297 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
301 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
303 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
306 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
308 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
310 * m10300-opc.c: Add autoincrement memory loads/stores.
314 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
316 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
317 phmsubh respectively.
320 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
322 start-sanitize-cygnus
323 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
325 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
326 @arch_cgen_get_int_operand.
327 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
328 Update call to @arch@_cgen_insert_operand.
329 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
330 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
331 (extract_insn_normal): New arg `pc', callers updated.
332 Update call to @arch@_cgen_extract_operand.
333 (print_insn): Update call to CGEN_EXTRACT_FN.
335 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
338 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
340 * m10300-opc.c: Fix load to sp and store from sp for the am33.
341 Add more multimedia instructions.
343 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
345 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
350 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
352 * mips-opc.c (pref): Enabled for the r5900.
355 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
357 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
359 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
361 (OP_J): Remove unnecessary subtraction when 16-bit displacement
362 will be masked later.
365 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
367 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
370 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
372 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
373 from raw register #s to symbolic names to make debugging easier.
376 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
378 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
380 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
382 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
383 start-sanitize-cygnus
384 * Makefile.am (CGENDIR): Set via configure.
385 (CGEN): New variable.
386 (CGENFILES): object.scm renamed to cos.scm.
387 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
388 (stamp-m32r): Pass prefix to run-cgen.
389 * Makefile.in: Regenerate.
390 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
391 * cgen-dis.in: Ditto.
392 * cgen-opc.in: Ditto.
393 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
394 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
395 * configure: Regenerate.
399 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
401 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
403 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
405 * m10300-opc.c: Reorder more instructions so that we do not
406 accidentally match a mn10300 instruction when we really
407 wanted an am33 instruction.
410 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
412 * m10300-dis.c: Only recognize instructions from the currently
414 * m10300-opc.c: Add field indicating the particular variant of
415 the mn10300 each instruction is available on.
417 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
419 * configure.in: For bfd_vax_arch, build vax-dis.lo.
420 * Makefile.am: Rebuild dependencies.
421 (CFILES): Add vax-dis.c.
422 (ALL_MACHINES): Add vax-dis.lo.
423 * aclocal.m4: Rebuild with current libtool.
424 * configure, Makefile.in: Rebuild.
426 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
428 * vax-dis.c: New file, from work by Pauline Middelink
429 <middelin@polyware.iaf.nl>.
430 * disassemble.c (ARCH_vax): Define if ARCH_all.
431 (disassembler): Add case for ARCH_vax.
432 * makefile.vms: Support compilation on vms/vax.
435 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
437 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
438 the DVP_OPERAND_RELOC_11_S4 relocation.
442 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
444 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
446 (disassemble): Correctly handle FMT_D10 instructions.
448 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
449 am33 shift instructions.
451 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
453 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
454 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
456 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
457 (mn10300_opcodes): Reorder so as to try and select opcodes from
458 the core chip when multiple alternatives exist. Change several
459 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
460 "macbu" instructions. Fix typos in a couple DSP instructions too.
463 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
465 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
466 related to sign extension and the size of ints.
468 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
470 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
471 instructions. Support (sp) addressing mode by expanding it into
475 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
477 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
478 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
479 be used as immediate values.
483 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
485 * m10300-opc.c: Support 4 byte DSP instructions.
488 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
490 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
493 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
495 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
498 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
500 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
503 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
505 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
506 found on the mn10300.
509 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
511 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
514 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
516 * mips-dis.c (print_insn_little_mips): Previously, instruction
517 printing references the symbol table to determine whether the
518 instruction resides in a block regular instructions or mips16
519 instructions. However, when the disassembler gets used in other
520 environments where the symbol table is not present, we no longer
521 rely in the symbol table, rather, use the low bit of the
522 instructions address to guess. There should be no change for usage
523 of the disassembler in host based programse, gdb ,objdump.
524 (print_insn_big_mips): ditto.
525 (print_insn_mips): ditto
527 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
529 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
531 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
534 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
535 operands for the am33.
536 (mn10300_opcodes): Add new instructions from the am33.
538 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
540 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
542 * i386-dis.c (index16): Add '%' to register names. Use ','
545 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
547 * i386-dis.c: Don't print opcode suffix when we can figure out the
548 size (and gas can!) by register operands, or from the default
550 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
552 (dis386, dis386_twobyte, grps): Use new suffix macros.
553 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
554 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
555 order of cmps operands to agree with Intel docs. Correct operand
556 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
557 agree with Intel docs.
558 (print_insn_x86): Print orphan fwait before other prefixes.
559 Return correct byte count for orphan fwait with prefixes. Don't
560 print `bound' operands in reverse order.
561 (ckprefix): Stop accumulating prefixes if we get fwait.
562 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
564 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
566 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
567 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
569 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
571 Fix problems when bfd_vma is wider than long.
572 * i386-dis.c: Make op_address and start_pc unsigned.
573 (set_op): Make parameter unsigned.
574 (print_insn_x86): Cast to bfd_vma when passing a value to
576 * ns32k-dis.c (CORE_ADDR): Don't define.
577 (print_insn_ns32k): Change type of addr to bfd_vma. Use
578 bfd_scan_vma to read back address.
579 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
581 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
582 (NEXTULONG): New definition.
583 (print_insn_m68k): Avoid overflow when computing third argument of
585 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
586 Use disp instead of val to store offset values.
587 (print_indexed): Use base_disp instead of word to store base
588 displacement, to avoid overflow.
589 * m10300-dis.c (disassemble): Cast value to long when computing
590 pc-relative address, to get correct sign extension.
592 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
594 * m32r-opc.c: Regenerate.
596 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
598 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
599 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
601 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
603 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
605 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
607 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
609 (OP_DSreg): Rename from OP_DSSI.
610 (OP_ESreg): Rename from OP_ESDI.
611 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
613 (append_seg): Rename from append_prefix.
614 (ptr_reg): New function.
615 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
617 (PREFIX_ADDR): Rename from PREFIX_ADR.
618 (float_reg): Add non-broken opcodes for people who don't want
621 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
623 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
626 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
628 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
630 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
632 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
633 0; produce error message for shifts of size 32 (or 64 for 64-bit
634 shifts), because the hardware doesn't support them.
637 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
639 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
642 * vu0.h (sqc2): Fix opcode.
644 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
648 start-sanitize-cygnus
649 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
651 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
652 Change pinfo to use WR_HILO.
655 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
657 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
658 LONG_2, LONG_2b formats to use this new operand.
660 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
662 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
664 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
666 * sparc-dis.c (print_insn_sparc): big endian instruction / little
669 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
671 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
672 and SHORT_B3b formats to use Rb instead of Ra.
674 Add FLAG_MUL16 to MUL2XH opcode.
676 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
677 to existing 1.1.1 parallelisation prohibition procedure.
679 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
681 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
682 * cgen-dis.in (extract_normal): Likewise.
683 * m32r-asm.c,m32r-dis.c: Regenerate.
686 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
688 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
692 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
694 * mips-opc.c (multu1): Add two operand variant for the r5900.
697 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
699 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
700 with a shift count of 0.
703 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
705 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
707 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
709 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
710 (_print_insn_mips): Likewise.
711 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
715 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
717 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
718 (cgen_hw_lookup_by_num): New function.
721 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
724 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
726 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
728 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
730 * sparc-dis.c (print_insn_sparc): Always fetch instructions
731 as big-endian on SPARClite.
734 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
736 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
738 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
742 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
744 * d30v-opc.c (pre_defined_register): Remove alias for r0.
747 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
749 * mips-opc.c (break): Added 20-bit single-operand break
750 instruction for R5900 only.
753 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
755 * po/Make-in (install-info): New target.
757 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
759 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
760 * configure: Rebuild.
762 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
764 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
765 variety of ISA2 instructions to set bottom ten bits of trap code.
767 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
769 * Makefile.am (config.status): Add explicit target so that
770 config.status depends upon bfd/configure.in.
771 * Makefile.in: Rebuild.
773 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
775 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
776 instructions to set bottom ten bits of break code.
777 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
778 for above optional argument.
780 start-sanitize-cygnus
781 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
783 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
784 * m32r-opc.h: Regenerate.
787 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
789 * makefile.vms: Run dec c with /nodebug.
791 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
793 * Makefile.in: Rebuilt.
794 * Makefile.am: Regenerated dependencies with mkdep.
796 * opintl.h (_): Define as dgettext.
798 start-sanitize-cygnus
799 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
801 * configure.in: Add support for --enable-cgen-maint.
802 * Makefile.am (M32R_DEPS): New variable.
803 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
804 * aclocal.m4: Regenerate.
805 * Makefile.in: Regenerate.
806 * configure: Regenerate.
808 * Makefile.am (CGENFILES): Add minsn.scm.
811 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
813 * cgen-asm.c: Internationalised.
814 start-sanitize-cygnus
815 * cgen-asm.in: Internationalised.
816 * cgen-opc.in: Internationalised.
818 * m32r-asm.c: Internationalised.
819 * m32r-dis.c: Internationalised.
820 * m32r-opc.c: Internationalised.
822 * aclocal.m4: Regenerated.
823 * configure: Regenerated.
824 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
825 * Makefile.in: Rebuild.
826 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
827 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
829 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
831 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
833 * aclocal.m4, configure: Rebuild with current tools.
835 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
837 * opintl.h: New file - contains internationalisation macros used
838 by source files in this directory.
839 * po/: New subdirectory - contains internationalisation files.
840 * po/Make-in: New file - Makefile constructor.
841 * po/POTFILES.in: New file - list of files in opcodes directory
842 that should be scan for internationalisation macros.
843 * po/opcodes.pot: New file - list of internationisation strings
844 found in files mentioned in po/POTFILES.in.
845 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
846 entry. Add intl directory to include paths.
847 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
848 HAVE_STRCPY, HAVE_LC_MESSAGES
849 * configure.in: Add rule to build Makefile in po subdirectory.
850 * Makefile.in: Rebuilt.
851 * aclocal.m4: Rebuilt.
852 * config.in: Rebuilt.
853 * configure: Rebuilt.
854 * alpha-opc.c: Internationalised.
855 * arc-dis.c: Internationalised.
856 * arc-opc.c: Internationalised.
857 * arm-dis.c: Internationalised.
858 * cgen-asm.c: Internationalised.
859 * d30v-dis.c: Internationalised.
860 * dis-buf.c: Internationalised.
862 * dvp-dis.c: Internationalised.
863 * dvp-opc.c: Internationalised.
865 * h8300-dis.c: Internationalised.
866 * h8500-dis.c: Internationalised.
867 * i386-dis.c: Internationalised.
868 * m10200-dis.c: Internationalised.
869 * m10300-dis.c: Internationalised.
870 * m68k-dis.c: Internationalised.
871 * m88k-dis.c: Internationalised.
872 * mips-dis.c: Internationalised.
873 * ns32k-dis.c: Internationalised.
874 * opintl.h: Internationalised.
875 * ppc-opc.c: Internationalised.
876 * sparc-dis.c: Internationalised.
877 * v850-dis.c: Internationalised.
878 * v850-opc.c: Internationalised.
880 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
882 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
883 (asm_hash_table_entries): New variable.
884 (cgen_asm_init): Free asm_hash_table_entries.
885 (hash_insn_array,hash_insn_list): New functions.
886 (build_asm_hash_table): Use them. Hash macro insns as well.
887 (cgen_asm_lookup_insn): Update.
888 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
889 (dis_hash_table_entries): New variable.
890 (cgen_dis_init): Free dis_hash_table_entries.
891 (hash_insn_array,hash_insn_list): New functions.
892 (build_dis_hash_table): Use them. Hash macro insns as well.
893 (cgen_dis_lookup_insn): Update.
894 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
895 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
896 (cgen_macro_insn_count): New function.
897 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
898 All callers updated. Sanity check result of extract fn.
899 (@arch@_cgen_get_insn_operands): Change result type to void.
900 Delete args insn_value, length. New arg fields. All callers updated.
901 (@arch@_cgen_lookup_get_insn_operands): New function.
902 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
904 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
906 * i386-dis.c (OP_DSSI): Print segment override.
909 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
911 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
915 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
917 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
921 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
923 * vu0.h (vlqd, vlqi): Update per revised specs.
927 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
929 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
930 (vif_operands): Update.
931 (vif_get_unpackloc): Delete.
932 (state_vif_unpackloc{,_star_p}): Delete.
933 (dvp_opcode_init_parse): Update.
934 (vif_unpack_len_value): Avoid divide by zero.
938 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
940 * vu0.h: Specs changed for VCALLMSR bit pattern.
941 * mips-dis.c: (print_insn_arg) Matching change.
944 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
946 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
949 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
951 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
952 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
953 * configure.in: Define and substitute WIN32LDFLAGS and
955 * aclocal.m4: Rebuild with new libtool.
956 * configure, Makefile.in: Rebuild.
959 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
961 * vu0.h: Corrected bit pattern for VMAXI opcode.
964 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
966 * m32r-opc.c: Regenerate.
969 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
971 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
972 (dvp_expand_macro): Implement.
973 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
974 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
977 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
979 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
980 before trying to copy it.
981 * Makefile.in: Rebuild.
983 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
985 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
988 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
990 * m32r-opc.c: Fix bit patterns for SAT and SATB.
993 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
995 * ns32k-dis.c (bit_extract_simple): New function to extract bits
996 from an arbitrary valid buffer instead of fetching them on demand
998 (invalid_float): use bit_extract_simple() instead of bit_extract().
1000 start-sanitize-m32rx
1001 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1003 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1004 * m32r-opc.h: Add extra control registers.
1007 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1009 From H.J. Lu <hjl@gnu.org>:
1010 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1013 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1015 * Branched binutils 2.9.
1017 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1019 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1020 disassembling last 4 bytes of a section.
1022 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1024 Fix some gcc -Wall warnings:
1025 * arc-dis.c (print_insn): Add casts to avoid warnings.
1026 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1027 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1029 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1030 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1031 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1032 (parse_ffstreg, parse_vif_mode): Likewise.
1034 * m10200-dis.c (disassemble): Likewise.
1035 * m10300-dis.c (disassemble): Likewise.
1036 * ns32k-dis.c (print_insn_ns32k): Likewise.
1037 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1038 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1039 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1040 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1041 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1043 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1044 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1045 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1047 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1048 start-sanitize-tic80
1049 * tic80-dis.c (print_one_instruction): Likewise.
1051 * w65-dis.c (print_operand): Likewise.
1052 * z8k-dis.c (fetch_data): Likewise.
1053 * a29k-dis.c: Add return type for find_byte_func_type.
1054 * arc-opc.c: Include <stdio.h>. Remove declarations of
1055 insert_multshift and extract_multshift.
1056 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1058 (extract_value): Fully parenthesize expression.
1060 * dvp-opc.c: Include <ctype.h>.
1061 (print_sdest): Add default case to switch.
1063 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1064 * h8500-opc.h (h8500_table): Fully bracket initializer.
1065 * w65-opc.h (optable): Likewise.
1066 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1067 * i386-dis.c (OP_E): Initialize local variables.
1068 * m10200-dis.c (print_insn_mn10200): Likewise.
1069 * mips-dis.c (print_insn_mips16): Likewise.
1070 * sh-dis.c (print_insn_shx): Likewise.
1071 * v850-dis.c (print_insn_v850): Likewise.
1072 * ns32k-dis.c (print_insn_arg): Declare.
1073 (get_displacement, invalid_float): Declare.
1074 (list_search, sign_extend, flip_bytes): Declare return type.
1075 (get_displacement): Likewise.
1076 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1078 (print_insn_ns32k): Make i unsigned.
1079 (invalid_float): Make static. Declare type of val.
1080 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1081 on each for iteration.
1082 * tic30-dis.c (get_indirect_operand): Likewise.
1083 * z8k-dis.c (print_insn_z8001): Declare return type.
1084 (print_insn_z8002): Likewise.
1085 (unparse_instr): Fix sprintf format strings.
1087 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1089 * mips-opc.c: Add "sync.l" and "sync.p".
1092 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1094 * dvp-opc.c (extract_vif_datalen): Rewrite.
1095 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1097 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1099 * dvp-dis.c (print_insn): Print unpack address in hex.
1100 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1101 Don't skip over '*', just record it.
1102 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1103 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1104 Don't skip over '*', just record it.
1105 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1106 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1107 (vif_opcodes): Likewise.
1108 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1109 (vif_macros,vif_macro_count): New globals.
1110 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1111 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1112 (vif_get_wl_cl): New function.
1113 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1116 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1118 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1119 default m68k variant to recognize.
1121 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1122 (ctrl, cobr, mem, ea): Likewise.
1123 (print_addr): Likewise. Remove cast.
1124 (ea): Cast argument of print_addr to bfd_vma.
1126 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1128 (cgen_parse_unsigned_integer): Likewise.
1129 (cgen_parse_address): Likewise.
1131 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1133 * i960-dis.c (ctrl): Add full braces to structure initialization.
1134 (cobr, mem, reg): Likewise.
1135 (ea): Correct parenthesization in expression.
1137 * cgen-asm.c: Include <ctype.h>.
1138 (build_asm_hash_table): Remove unused local variable i.
1139 (cgen_parse_keyword): Add casts to avoid warnings.
1141 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1142 symbol. Fix indentation.
1143 (print_insn_little_arm): Likewise.
1145 start-sanitize-r5900
1146 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1148 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1152 start-sanitize-m32rx
1153 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1155 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1160 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1162 * dvp-opc.c (vif_operand_datalen_special): New global.
1165 start-sanitize-r5900
1166 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1168 * vu0.h (vcallms): Use 'O' for call target operand.
1169 * mips-dis.c (print_insn_arg): Handle 'O'.
1172 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1174 * configure.in: Use AM_DISABLE_SHARED.
1175 * aclocal.m4, configure: Rebuild with libtool 1.2.
1177 start-sanitize-r5900
1178 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1180 * mips-dis.c: Change '%' to '#' in r5900 support.
1184 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1186 These patches are courtesy of Jonathan Walton and Tony Thompson
1187 (athompso@cambridge.arm.com).
1189 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1192 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1193 both the offset and the label closest to the destination.
1195 start-sanitize-r5900
1196 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1198 * vu0.h: New file with cop2/vu0 instructions.
1199 * mips-opc.c: Include vu0.h.
1200 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1202 (print_insn_mips): Do not emit a tab after an instruction if the
1203 first arg is an instruction completer (&). If the next arg is an
1204 escape character (%), then print the next arg verbatim.
1205 * Makefile.am (mips-opc.lo): Depend on vu0.h
1209 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1211 * dvp-opc.c (vif_opcodes): Add stcycl.
1213 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1215 * dvp-dis.c (print_dma): Change length from 16 to 8.
1218 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1220 * m32r-opc.h: Regenerate.
1223 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1225 * dvp-opc.c (print_dest1): Print dest spec again.
1226 (print_vfreg,print_accdest): Likewise.
1227 (vif_unpack_len): Round result up to word boundary.
1230 start-sanitize-vr4320
1231 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1233 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1235 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1237 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1242 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1244 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1245 (print_insn): Do mask comparison on proper opcode word.
1246 Print unsigned values in hex.
1247 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1248 (parse_bc): Catch missing dest.
1249 (parse_vfreg): Replace atoi call with strtol.
1250 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1251 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1252 (extract_gif_eop): New function.
1253 (gif_operands): Update eop entry.
1254 (VGIFOP,VGIFNREGS): Fix calcs.
1255 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1256 (gif_regs): Add entry for unused 11 case.
1257 (print_gif_regs): Print empty list instead of nothing.
1258 (extract_gif_nloop): Fix value calc.
1259 (print_gif_nloop): Always print value, even if 0.
1260 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1261 (vif_operands): Use them for wl,cl fields.
1262 (state_vif_wl,state_vif_cl): New static locals.
1263 (parse_vif_mode): Handle numeric args.
1264 (vif_unpack_len_value,vif_unpack_len): New functions.
1265 (vif_insn_len): Call vif_unpack_len.
1268 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1270 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1272 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1274 * cgen-asm.in: Move insertion of generated routines to top of file.
1275 (insert_normal): Add prototype. Delete `shift' arg.
1276 * cgen-dis.in: Move insertion of generated routines to top of file.
1277 (extract_normal): Add prototype. Delete `shift' arg.
1278 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1279 (print_keyword): Add prototype. Fix type of `attrs' arg.
1281 start-sanitize-vr4320
1282 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1284 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1285 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1288 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1290 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1291 assume that info->symbols is non-empty.
1293 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1295 * alpha-opc.c (cvtqs) There is no such thing.
1296 (cvttq): Missing most of the /*d variants.
1298 start-sanitize-r5900
1299 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1301 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1303 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1304 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1307 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1309 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1310 delayed branches or jumps.
1313 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1315 * dvp-opc.c (vif_operands): Add unpack[u] support.
1316 (vif_opcodes): Ditto.
1317 (*_vif_imrubits): Renamed from *_vif_imrbits.
1319 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1321 * dvp-dis.c (print_insn): Handle word number.
1322 Handle mips address vs vu address.
1323 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1324 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1325 ({insert,extract}_dma_addr): Fix word ofset.
1326 ({insert,print}_gif_regs): Fix encode/decode.
1329 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1331 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1333 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1334 * tic30-dis.c (print_branch): Likewise.
1336 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1337 * dvp-dis.c (dvp_info_mach_type): New function.
1338 (print_insn_dvp): Call it.
1339 (print_vif): Return length of 4 if mpg or direct insn so following
1340 insns get properly disabled.
1341 (print_gif): Fix word order.
1342 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1343 (gif_operands): Fix word order.
1344 (gif_opcodes): Likewise.
1345 ({insert,extract,print}_gif_regs): Likewise.
1346 (gif_regs): Add new register number/name changes.
1347 (dma_opcodes): Add dmarefe insn.
1350 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1352 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1353 saved_symbol code as it is no longer needed.
1355 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1357 * cgen-asm.c: Include symcat.h.
1358 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1360 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1363 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1365 * dvp-opc.c (extra_dma_flags): Fix typos.
1366 (dma_operands): Fix word numbers.
1367 (dma_opcodes): Likewise.
1368 ({insert,extract}_dma_flags): Likewise.
1371 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1373 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1376 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1378 * dvp-dis.c (print_gif): Complete.
1379 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1380 (state_gif_{nregs,regs,nloop}): New static locals.
1381 (*_gif_*): Complete.
1382 (dvp_opcode_init_{parse,print}): Init gif state locals.
1383 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1384 (vif_insn_len): Handle `unpack'.
1385 ({insert,extract}_dma_flags): Complete.
1388 start-sanitize-r5900
1389 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1391 * mips-opc.c (mula.s): Renamed from multa.s.
1394 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1396 * m32r-opc.[ch]: Regenerate.
1399 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1401 * dvp-opc.c (dma_operands): Rewrite.
1402 (dma_operand_{count,addr}): New globals.
1403 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1404 (insert_dma_addr): Insert value into insn.
1405 (extract_dma_addr): Extract value from insn.
1407 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1409 * dvp-dis.c (print_vu): Handle loi insns.
1410 (print_insn): Likewise.
1411 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1412 (vu_operands): Make LDEST1 a FAKE operand.
1413 (parse_dest1): Allow elided argument.
1414 (print_dest1): Don't print the argument.
1416 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1418 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1419 (print_vfreg): Don't print dest spec.
1420 (parse_accdest): Dest spec is optional.
1421 (print_accdest): Don't print dest spec.
1424 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1426 * Makefile.am (CGENFILES): Update.
1427 * Makefile.in: Regenerate.
1428 * cgen-asm.in (insert_normal): Result is error message now.
1429 Validate value to be inserted.
1430 (insert_insn_normal): Result is error message now.
1431 (@arch@_cgen_assemble_insn): Update.
1432 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1433 arguments. Don't perform validation here.
1434 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1436 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1438 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1439 operand instance list.
1440 * m32r-opc.c: Regenerate.
1442 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1444 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1445 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1447 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1449 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1451 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1453 * configure.in: Get the version number from BFD.
1454 * configure: Rebuild.
1456 From H.J. Lu <hjl@gnu.org>:
1457 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1458 * Makefile.in: Rebuild.
1460 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1462 * m32r-opc.c: Regenerate.
1463 * m32r-opc.h: Regenerate.
1465 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1467 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1468 Ignore ALIAS insns if asked to.
1469 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1470 * m32r-opc.c: Regenerate.
1473 * dvp.opc.c: Nicely format opcode tables.
1474 (vu_operands): New element UFLAGS.
1475 (parse_uflags,print_uflags): New functions.
1476 (vu_upper_opcodes): Add UFLAGS to all insns.
1479 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1481 Fix rac to accept only a0:
1482 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1483 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1484 Introduce OPERAND_GPR.
1485 * d10v-dis.c (print_operand): Likewise.
1487 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1489 * cgen-opc.in: New file.
1490 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1491 * Makefile.am (CGENFILES): Add cgen-opc.in.
1492 * Makefile.in: Regenerate.
1494 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1495 (cgen_hw_lookup): Make result const.
1497 * cgen-dis.in (*): Use PTR instead of void *.
1498 (print_insn): Delete unused vars `i', `syntax'.
1500 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1503 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1505 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1506 (vif_opcodes): Update renamed insns.
1507 * dvp-dis.c (*): Likewise.
1510 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1512 * configure, aclocal.m4: Rebuild with new libtool.
1514 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1516 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1517 instructions use a PC relative branch, not absolute.
1519 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1521 * configure.in: Set libtool_enable_shared rather than
1522 libtool_shared. Remove diversion hack.
1523 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1525 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1527 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1528 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1530 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1532 * tic30-dis.c: New file.
1533 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1534 * configure.in: Handle bfd_tic30_arch.
1535 * Makefile.am: Rebuild dependencies.
1536 (CFILES): Add tic30-dis.c
1537 (ALL_MACHINES): Add tic30-dis.lo.
1538 * configure, Makefile.in: Rebuild.
1540 start-sanitize-m32rx
1541 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1543 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1544 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1545 macwhi-a and macwlo-a instructions.
1549 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1551 * dvp-opc.c, fixed encoding of a bunch of instructions to
1552 be consistent with the asmvu assembler (and inconsistent
1553 with the specification).
1555 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1557 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1558 in the opcode table. The pkemscalf instruction must come first.
1560 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1562 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1565 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1567 * m32r-opc.h (HAVE_CPU_M32R): Define.
1570 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1572 * dvp-dis.c, dvp-opc.c: New files.
1573 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1574 * configure: Regenerate.
1575 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1576 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1577 (mips-dis.lo): Compile with @archdefs@.
1578 * Makefile.in: Regenerate.
1579 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1580 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1583 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1585 * v850-opc.c (insertion routines): If both alignment and size is
1586 wrong then report this.
1588 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1590 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1591 Only recognize instructions for the current target_processor.
1593 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1595 * d10v-dis.c (PC_MASK): Correct value.
1596 (print_operand): If there's a reloc, don't calculate the
1597 address because they could be in different sections.
1599 start-sanitize-cygnus
1600 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1602 * cgen.sh: Rewrite to be like simulator's version.
1603 * Makefile.am (cgen): Update call to cgen.sh.
1604 * Makefile.in: Regenerate
1607 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1609 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1610 instruction after the 4650's "mul" instruction; nobody's using the
1611 4010 these days. If object files someday indicate which processor
1612 variant they're intended for, we can do a better job at this.
1614 start-sanitize-r5900
1615 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1617 * mips-opc.c (c.lt.s): Add r5900 variant.
1621 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1623 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1624 table provided entry size. Use CGEN_INSN_MNEMONIC.
1625 (cgen_parse_keyword): Rewrite.
1626 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1627 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1628 * cgen-opc.c: Clean up pass over `struct foo' usage.
1629 (cgen_keyword_lookup_value): Handle "" entry.
1630 (cgen_keyword_add): Likewise.
1631 start-sanitize-cygnus
1632 * Makefile.am: Add cgen support.
1633 * Makefile.in: Regenerate.
1634 * configure.in: Add cgen support.
1635 * configure: Regenerate.
1636 * aclocal.m4: Regenerate.
1637 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1640 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1642 * mips-opc.c: Add FP_D to s.d instruction flags.
1644 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1646 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1648 start-sanitize-tic80
1649 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1651 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1652 PC relative offset forms before the 15 bit forms. An assembler command
1653 line option now chooses the default.
1656 start-sanitize-r5900
1657 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1659 * mips-opc.c: Add many missing r5900 instructions.
1662 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1664 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1665 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1667 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1669 * configure: Only build libopcodes shared if --enable-shared's value
1670 was `yes', or was set to `*opcodes*'.
1671 * aclocal.m4: Likewise.
1672 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1673 original source of this bit of code. It's not clear what the best fix
1676 start-sanitize-r5900
1677 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1679 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1681 start-sanitize-tic80
1682 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1684 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1685 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1686 offset forms before the 15 bit forms, to default to the long forms.
1689 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1691 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1693 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1695 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1696 symbol if none is present.
1697 (print_insn_big_arm): Prevent examination of stored symbol if
1700 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1702 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1704 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1706 * disassemble.c: Remove disasm_symaddr() function.
1708 * arm-dis.c: Use info->symbol instead of info->flags to determine
1709 if disassmbly should be in Thumb or Arm mode.
1711 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1713 * arm-dis.c: Add support for disassembling Thumb opcodes.
1714 (print_insn_thumb): New function.
1716 * disassemble.c (disasm_symaddr): New function.
1718 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1719 (thumb_opcodes): Table of Thumb opcodes.
1721 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1723 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1725 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1726 and 'v' as operand types.
1728 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1730 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1731 <olivier.carmona@di.epfl.ch>.
1732 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1733 which has a two word opcode with a one word argument.
1735 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1737 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1738 unsigned, not signed.
1739 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1741 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1743 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1744 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1745 (ftrv): Slay the cut-and-paste monster.
1747 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1749 * d10v-dis.c (print_operand):
1750 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1752 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1754 * d10v-opc.c (OPERAND_FLAG): Split into:
1755 (OPERAND_FFLAG, OPERAND_CFLAG) .
1759 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1761 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1762 field for all INSN_MACRO's.
1763 * mips16-opc.c: same
1765 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1767 * mips-opc.c (sync,cache): These are 3900 insns.
1769 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1771 sh-opc.h (sh_table): Remove ftst/nan.
1773 start-sanitize-cygnus
1774 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1776 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1777 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1779 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1783 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1785 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1786 Add tx49 insns and configury.
1789 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1791 * mips-opc.c (ffc, ffs): Fix mask.
1793 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1795 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1798 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1800 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1801 start-sanitize-cygnus
1802 Added VR5400 instructions.
1803 (N5): New cpu-id macro.
1805 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1807 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1809 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1810 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1812 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1814 * v850-dis.c (disassemble): Replace // with /* ... */
1816 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1818 * sparc-opc.c: Add wr & rd for v9a asr's.
1819 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1820 (v9a_asr_reg_names): New variable.
1821 Patch from David Miller <davem@vger.rutgers.edu>.
1823 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1825 * sparc-opc.c (v9notv9a): New insn type.
1826 (IMPDEP): Move to the end to not conflict with edge8 et al.
1827 Patch from David Miller <davem@vger.rutgers.edu>.
1829 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1831 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1833 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1835 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1837 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1839 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1840 of disassemble_info structure to determine if an overlay address
1841 has a matching symbol in low memory.
1843 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1844 new symbol_at_address_func field in disassemble_info structure.
1846 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1848 * v850-opc.c (extract_d22): Use signed arithmatic.
1850 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1852 * mips-opc.c: Three op mult is not an ISA insn.
1854 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1856 * mips-opc.c: Fix formatting.
1858 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1860 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1861 than assuming that char is signed. Explicitly sign extend 16 bit
1862 values, rather than assuming that short is 16 bits.
1863 (OP_sI, OP_J, OP_DIR): Likewise.
1865 start-sanitize-v850e
1866 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1868 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1872 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1874 * v850-opc.c: Fix typo in comment.
1876 * v850-dis.c (disassemble): Add test of processor type when
1877 determining opcodes.
1879 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1881 * configure.in: Use a diversion to set enable_shared before the
1882 arguments are parsed.
1883 * configure: Rebuild.
1885 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1887 * m68k-opc.c (TBL1): Use ! rather than `.
1888 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1890 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1892 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1894 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1896 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1899 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1900 * aclocal.m4: Rebuild with new libtool.
1901 * configure: Rebuild.
1903 start-sanitize-v850e
1904 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1906 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1909 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1911 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1913 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1915 * v850-opc.c (v850_opcodes): Further rearrangements.
1917 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1919 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1921 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1923 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1926 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1928 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1930 * mips16-opc.c: Added mips16 sdbbp.
1933 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1935 * v850-opc.c: Initialise processors field of v850_opcode structure.
1937 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1939 Merge changes from Martin Hunt:
1941 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1943 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1944 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1945 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1947 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1949 * d30v-dis.c (print_insn): First operand of d*i (delayed
1950 branch) instructions is relative.
1952 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1953 (d30v_operand_table): Add IMM6S3 type.
1954 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1956 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1957 and cmp instructions.
1959 * d30v-opc.c: Correct entries for repeat*, and sat*.
1960 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1961 types. Correct several formats.
1963 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1965 * d30v-opc.c (pre_defined_registers): Change control registers.
1967 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1968 SHORT_C2. Manual was incorrect.
1970 * d30v-dis.c (lookup_opcode): Return value now indicates
1971 if an opcode has a short and a long form. Used for deciding
1972 to append a ".s" or ".l".
1973 (print_insn): Append a ".s" to an instruction if it is
1974 the short form and ".l" if it is a long form. Do not append
1975 anything if the instruction has only one possible size.
1977 * d30v-opc.c: Change mulx2h to require an even register.
1978 New form: SHORT_A2; a SHORT_A form that needs an even
1979 register as the first operand.
1981 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1982 instruction was not being disassembled if there were an odd
1983 number of instructions.
1985 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1987 start-sanitize-v850e
1988 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1990 * v850-dis.c (disassemble): Improved display of register lists.
1993 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1995 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1996 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1997 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1998 fandnot1s, fandnot2s.
2000 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2002 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2004 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2006 * cgen-asm.c (cgen_parse_address): New argument resultp.
2007 All callers updated.
2008 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2010 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2012 * mn10200-dis.c (disassemble): PC relative instructions are
2013 relative to the next instruction, not the current instruction.
2015 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2017 * v850-dis.c (disassemble): Only signed extend values that are not
2018 returned by extract functions.
2019 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2021 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2023 * v850-opc.c: Update comments. Remove use of
2024 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2026 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2028 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2030 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2032 * configure: Rebuilt with latest devo autoconf for NT support.
2034 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2036 * v850-dis.c (disassemble): Use curly brace syntax for register
2039 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2040 where r0 is being used as a destination register.
2042 start-sanitize-v850e
2043 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2045 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2048 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2050 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2051 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2052 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2053 Add insns to access SGR and DBR.
2054 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2056 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2058 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2060 start-sanitize-v850e
2061 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2063 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2064 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2067 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2069 * configure (cgen_files): Add support for v850e target.
2070 * configure.in (cgen_files): Add support for v850e target.
2072 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2074 * configure (cgen_files): Add support for v850ea target.
2075 * configure.in (cgen_files): Add support for v850ea target.
2078 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2080 * configure.in (bfd_arc_arch): Add.
2081 * configure: Rebuild.
2082 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2083 * Makefile.in: Rebuild.
2084 * arc-dis.c, arc-opc.c: New files.
2085 * disassemble.c (ARCH_all): Define ARCH_arc.
2086 (disassembler): Add ARC support.
2088 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2090 start-sanitize-v850e
2091 * v850-dis.c (disassemble): Add support for v850EA instructions.
2093 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2094 (v850_opcodes): Add v850EA instructions.
2096 * v850-dis.c (disassemble): Add support for v850E instructions.
2098 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2099 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2100 insert_spe, extract_spe): New Functions.
2101 (v850_opcodes): Add v850E instructions.
2104 * v850-opc.c: Reorganised and re-layed out to improve readability
2107 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2109 * configure: Rebuild with autoconf 2.12.1.
2111 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2113 * aclocal.m4, configure: Rebuild with new automake patches.
2115 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2117 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2118 * acinclude.m4: Just include acinclude.m4 from BFD.
2119 * aclocal.m4, configure: Rebuild.
2121 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2123 * Makefile.am: New file, based on old Makefile.in.
2124 * acconfig.h: New file.
2125 * acinclude.m4: New file.
2126 * stamp-h.in: New file.
2127 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2128 Removed shared library handling; now handled by libtool. Replace
2129 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2130 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2131 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2132 handling in AC_OUTPUT.
2133 * dep-in.sed: Change .o to .lo.
2134 * Makefile.in: Now built with automake.
2135 * aclocal.m4: Now built with aclocal.
2136 * config.in, configure: Rebuild.
2138 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2140 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2142 start-sanitize-r5900
2143 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2145 * mips-opc.c: Fix coding of mtsa.
2148 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2150 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2152 * sparc-dis.c (sorted_opcodes): New static local.
2153 (struct opcode_hash): `opcode' is pointer to const element.
2154 (build_hash): First arg is now table of sorted pointers.
2155 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2156 (compare_opcodes): Update.
2158 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2160 * cgen-opc.c: #include <ctype.h>.
2161 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2162 Handle case insensitive hashing.
2163 (hash_keyword_value): Change type of `value' to unsigned int.
2165 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2167 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2168 precision FP, mark it as such. Likewise for double precision
2169 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2171 start-sanitize-r5900
2172 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2175 start-sanitize-r5900
2176 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2178 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2179 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2182 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2184 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2186 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2187 nesting depth when all the macros are expanded.
2189 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2191 * sparc-opc.c: The fcmp v9a instructions take an integer register
2192 as a destination, not a floating point register. From Christian
2193 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2195 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2197 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2198 syntax. From Roman Hodek
2199 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2201 * i386-dis.c (twobyte_has_modrm): Fix pand.
2203 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2205 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2207 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2209 * arm-dis.c: Add prototypes for arm_decode_shift and
2212 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2214 * mips-opc.c: Add r3900 insns.
2216 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2218 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2219 print delay slot instructions on the same line. When using a PC
2220 relative load, add a comment with the value being loaded if it can
2223 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2225 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2226 to pushS/popS for segment regs and byte constant so that
2227 pushw/popw printed when in 16 bit data mode.
2229 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2230 print cbtw, cwtd in 16 bit data mode.
2231 * i386-dis.c (putop): extra case W to support above.
2233 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2234 address size prefix in 16 bit address mode.
2236 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2238 * sh-dis.c: Reindent. Rename local variable fprintf to
2241 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2243 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2245 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2247 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2249 * mips16-opc.c (mip16_opcodes): same.
2251 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2253 * m68k-opc.c (moveb): Change $d to %d.
2255 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2257 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2258 (twobyte_has_modrm): Likewise.
2260 (OP_MMX, OP_EM, OP_MS): New static functions.
2262 * i386-dis.c: Revert patch of April 4. The output now matches
2265 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2267 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2270 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2272 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2274 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2276 * Makefile.in (install): Depend upon installdirs.
2277 (installdirs): New target.
2279 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2281 From Thomas Graichen <graichen@rzpd.de>:
2282 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2283 * configure: Rebuild.
2285 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2287 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2288 Delete string{,s}.h support.
2290 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2292 * cgen-asm.c (cgen_parse_operand_fn): New global.
2293 (cgen_parse_{{,un}signed_integer,address}): Update call to
2294 cgen_parse_operand_fn.
2295 (cgen_init_parse_operand): New function.
2296 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2297 from cgen_asm_init_parse.
2298 (m32r_cgen_assemble_insn): New operand `errmsg'.
2299 Delete call to as_bad, return error message to caller.
2300 (m32r_cgen_asm_hash_keywords): #if 0 out.
2302 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2304 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2306 [case 'J']: Fix typo in register name.
2308 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2310 * configure.in: Substitute SHLIB_LIBS.
2311 * configure: Rebuild.
2312 * Makefile.in (SHLIB_LIBS): New variable.
2313 ($(SHLIB)): Use $(SHLIB_LIBS).
2315 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2317 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2319 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2321 * disassemble.c (disassembler): Handle m32r.
2323 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2325 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2326 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2327 * Makefile.in (CFILES): Add them.
2328 (ALL_MACHINES): Add them.
2329 (dependencies): Regenerate.
2330 * configure.in (cgen_files): New variable.
2331 (bfd_m32r_arch): Add entry.
2332 * configure: Regenerate.
2334 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2336 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2337 * configure: Rebuild.
2339 * Makefile.in: Rebuild dependencies.
2341 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2343 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2346 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2348 * Branched binutils 2.8.
2350 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2352 * m10200-dis.c: Rename from mn10200-dis.c.
2353 * m10200-opc.c: Rename from mn10200-opc.c.
2354 * m10300-dis.c: Rename from mn10300-dis.c
2355 * m10300-opc.c: Rename from mn10300-opc.c.
2356 * Makefile.in: Update accordingly.
2358 * mips16-opc.c: Add mul and dmul macros.
2360 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2362 * makefile.vms: Update CFLAGS, add clean target.
2364 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2366 * mips-opc.c: Add "wait". From Ralf Baechle
2367 <ralf@gnu.ai.mit.edu>.
2369 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2370 * configure, config.in: Rebuild.
2371 * sysdep.h: Include <stdlib.h> if it exists.
2372 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2374 * Makefile.in: Rebuild dependencies.
2376 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2378 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2379 Andrew Bray <andy@madhouse.demon.co.uk>.
2381 * mips-opc.c: Add cast when setting mips_opcodes.
2383 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2385 * v850-dis.c (disassemble): Fix sign extension problem.
2386 * v850-opc.c (extract_d*): Fix sign extension problems to make
2387 disassembly calculate branch offsets correctly.
2389 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2391 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2393 * mips-opc.c: Add dctr and dctw.
2395 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2397 * d30v-dis.c (print_insn): Change the way signed constants
2400 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2402 * Makefile.in (BFD_H): New variable.
2403 (HFILES): New variable.
2404 (CFILES): Add all C files.
2405 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2406 Delete old dependencies, and build new ones.
2407 * dep-in.sed: New file.
2409 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2411 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2413 start-sanitize-coldfire
2414 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2416 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2419 end-sanitize-coldfire
2420 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2422 * mn10200-opc.c: Change "trap" to "syscall".
2423 * mn10300-opc.c: Add new "syscall" instruction.
2425 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2427 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2428 mulul insns on the coldfire.
2430 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2432 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2433 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2434 (print_insn_little_arm): Likewise.
2436 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2438 Based on patches from H.J. Lu <hjl@lucon.org>:
2439 * i386-dis.c (fetch_data): Add prototype.
2440 * m68k-dis.c (fetch_data): Add prototype.
2441 (dummy_print_address): Add prototype. Make static.
2442 * ppc-opc.c (valid_bo): Add prototype.
2443 * sparc-dis.c (build_hash_table): Add prototype.
2444 (is_delayed_branch, compute_arch_mask): Add prototypes.
2445 (print_insn_sparc): Make several local variables const.
2446 (compare_opcodes): Change arguments to const PTR. Add prototype.
2447 * sparc-opc.c (arg): Change name field to be const.
2448 (lookup_name, lookup_value): Add prototypes. Change table and
2449 name parameters to be const.
2450 (sparc_encode_asi): Change name parameter to be const.
2451 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2452 (sparc_encode_sparclet_cpreg): Likewise.
2453 (sparc_decode_asi): Change return type to be const.
2454 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2455 (sparc_decode_sparclet_cpreg): Likewise.
2457 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2459 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2460 Solaris doesn't like the combined options, and the -f is
2462 (stamp-tshlink, install): Likewise.
2464 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2466 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2469 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2471 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2473 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2475 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2478 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2480 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2482 start-sanitize-tic80
2483 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2485 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2487 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2489 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2492 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2494 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2495 floatformat_to_double to make portable.
2496 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2499 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2501 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2502 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2504 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2506 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2507 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2509 start-sanitize-tic80
2510 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2512 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2513 (OFF_SL_BR_SCALED): ... to this, and added the flag
2514 TIC80_OPERAND_BASEREL to the flags word.
2515 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2519 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2521 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2522 Change mips_opcodes from const array to a pointer,
2523 and change bfd_mips_num_opcodes from const int to int,
2524 so that we can increase the size of the mips opcodes table
2527 start-sanitize-tic80
2528 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2530 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2531 store BITNUM values in the table in one's complement form
2532 to match behavior when assembler is given a raw numeric
2533 value for a BITNUM operand.
2534 * tic80-dis.c (print_operand_bitnum): Ditto.
2537 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2539 * d30v-opc.c: Removed references to FLAG_X.
2541 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2543 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2545 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2547 * Makefile.in: Added d30v object files.
2548 * configure: (bfd_d30v_arch) Rebuilt.
2549 * configure.in: (bfd_d30v_arch) Added new case.
2550 * d30v-dis.c: New file.
2551 * d30v-opc.c: New file.
2552 * disassemble.c (disassembler) Add entry for d30v.
2554 start-sanitize-tic80
2555 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2557 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2558 representations for the floating point BITNUM values.
2560 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2562 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2563 in the table in one's complement form, as they appear in the
2565 (tic80_symbol_to_value): Use macros to access predefined
2567 (tic80_value_to_symbol): Ditto.
2568 (tic80_next_predefined_symbol): New function.
2569 * tic80-dis.c (print_operand_bitnum): Remove code that did
2570 one's complement for BITNUM values.
2573 start-sanitize-r5900
2574 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2576 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2579 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2581 * makefile.vms: Remove 8 bit characters. Update to latest
2584 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2586 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2588 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2590 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2591 (IMM24_PCREL): Likewise.
2593 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2595 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2596 address for an extended PC relative instruction that is not a
2599 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2601 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2604 start-sanitize-tic80
2605 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2607 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2608 (tic80_opcodes): Sort entries so that long immediate forms
2609 come after short immediate forms, making it easier for
2610 assembler to select the right one for a given operand.
2613 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2615 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2617 (print_insn_mips16): Likewise.
2619 start-sanitize-r5900
2620 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2622 * mips-opc.c: add r5900.
2625 start-sanitize-tic80
2626 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2628 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2629 a symbol class that restricts translation to just that
2630 class (general register, condition code, etc).
2632 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2634 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2635 and REG_DEST_E for register operands that have to be
2636 an even numbered register. Add REG_FPA for operands that
2637 are one of the floating point accumulator registers.
2638 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2639 (tic80_opcodes): Change entries that need even numbered
2640 register operands to use the new operand table entries.
2641 Add "or" entries that are identical to "or.tt" entries.
2644 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2646 * mips16-opc.c: Add new cases of exit instruction for
2648 * mips-dis.c (print_mips16_insn_arg): Display floating point
2649 registers in operands of exit instruction. Print `$' before
2650 register names in operands of entry and exit instructions.
2652 start-sanitize-tic80
2653 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2655 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2656 pairs for all predefined symbols recognized by the assembler.
2657 Also used by the disassembling routines.
2658 (tic80_symbol_to_value): New function.
2659 (tic80_value_to_symbol): New function.
2660 * tic80-dis.c (print_operand_control_register,
2661 print_operand_condition_code, print_operand_bitnum):
2662 Remove private tables and use tic80_value_to_symbol function.
2665 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2667 * d10v-dis.c (print_operand): Change address printing
2668 to correctly handle PC wrapping. Fixes PR11490.
2670 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2672 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2675 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2677 * mips-dis.c (print_insn_mips16): Set insn_info information.
2678 (print_mips16_insn_arg): Likewise.
2680 * mips-dis.c (print_insn_mips16): Better handling of an extend
2681 opcode followed by an instruction which can not be extended.
2683 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2685 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2686 coldfire moveb instruction to not allow an address register as
2687 destination. Although the documentation does not indicate that
2688 this is invalid, experiments uncovered unexpected behavior.
2689 Added a comment explaining the situation. Thanks to Andreas
2690 Schwab for pointing this out to me.
2692 start-sanitize-tic80
2693 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2695 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2696 entries are presorted so that entries with the same mnemonic are
2697 adjacent to each other in the table. Sort the entries for each
2698 instruction so that this is true.
2701 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2703 * m68k-dis.c: Include <libiberty.h>.
2704 (print_insn_m68k): Sort the opcode table on the most significant
2705 nibble of the opcode.
2707 start-sanitize-tic80
2708 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2710 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2711 "vsub", "vst", "xnor", and "xor" instructions.
2712 (V_a1): Renamed from V_a, msb of accumulator reg number.
2713 (V_a0): Add macro, lsb of accumulator reg number.
2715 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2717 * tic80-dis.c (print_insn_tic80): Broke excessively long
2718 function up into several smaller ones and arranged for
2719 the instruction printing function to be callable recursively
2720 to print vector instructions that have both a load and a
2721 math instruction packed into a single opcode.
2722 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2723 to explain why it comes after the other vector opcodes.
2726 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2728 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2729 move insns to handle immediate operands.
2731 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2733 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2734 fix operand mask in the "moveml" entries for the coldfire.
2736 start-sanitize-tic80
2737 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2739 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2740 New macros for building vector instruction opcodes.
2741 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2742 FMT_LI, which were unused. The field is now a flags field.
2743 Remove some opcodes that are possible, but illegal, such
2744 as long immediate instructions with doubles for immediate
2745 values. Add "vadd" and "vld" instructions.
2747 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2749 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2750 the order more logical. Move the shift alias instructions ("rotl",
2751 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2752 interspersed with the regular sr.x and sl.x instructions. Add
2753 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2754 "sub", "subu", "swcr", and "trap".
2756 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2758 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2759 (OFF_SL_PC): Renamed from OFF_SL.
2760 (OFF_SS_BR): New operand type for base relative operand.
2761 (OFF_SL_BR): New operand type for base relative operand.
2762 (REG_BASE): New operand type for base register operand.
2763 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2764 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2765 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2767 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2768 10 char field, padded with spaces on rhs, rather than a string
2769 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2770 than old TIC80_OPERAND_RELATIVE. Add support for new
2771 TIC80_OPERAND_BASEREL flag bit.
2773 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2775 * tic80-dis.c (print_insn_tic80): Print floating point operands
2777 * tic80-opc.c (SPFI): Add single precision floating point
2778 immediate operand type.
2779 (ROTATE): Add rotate operand type for shifts.
2780 (ENDMASK): Add for shifts.
2781 (n): Macro for the 'n' bit.
2782 (i): Macro for the 'i' bit.
2783 (PD): Macro for the 'PD' field.
2784 (P2): Macro for the 'P2' field.
2785 (P1): Macro for the 'P1' field.
2786 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2790 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2792 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2793 adding in current address for pc-relative operands.
2795 start-sanitize-tic80
2796 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2798 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2799 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2800 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2801 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2802 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2803 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2804 (REG_SCALED, LSI_SCALED): New operand types.
2805 (E): New macro for 'E' bit at bit 27.
2806 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2807 opcodes, including the various size flavors (b,h,w,d) for
2808 the direct load and store instructions.
2810 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2812 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2814 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2815 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2816 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2817 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2818 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2819 masks with "MASK_* & ~M_*" to get the M bit reset.
2820 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2822 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2824 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2825 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2826 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2828 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2829 CC, SICR, and LICR table entries.
2830 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2831 "bcnd", and "brcr" opcodes.
2834 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2836 * ppc-opc.c (powerpc_operands): Make comment match the
2837 actual fields (no shift field).
2838 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2839 start-sanitize-tic80
2840 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2841 partial implementation, work in progress.
2842 * tic80-opc.c (tic80_operands): Begin construction operands table.
2843 (tic80_opcodes): Continue populating opcodes table and start
2844 filling in the operand indices.
2845 (tic80_num_opcodes): Add this.
2848 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2850 * m68k-opc.c: Add #B case for moveq.
2852 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2854 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2855 before they are used.
2857 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2859 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2860 for "breakpoint" instruction.
2862 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2864 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2865 (dep): Use ALL_CFLAGS rather than CFLAGS.
2867 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2869 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2872 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2874 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2875 start-sanitize-tic80
2876 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2879 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2881 * mips16-opc.c: Add "abs".
2883 start-sanitize-tic80
2884 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2886 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2887 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2888 (disassembler): Add bfd_arch_tic80 support to set disassemble
2889 to print_insn_tic80.
2890 * tic80-dis.c (print_insn_tic80): Add stub.
2892 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2894 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2895 * configure: Regenerate with autoconf.
2896 * tic80-dis.c: Add file.
2897 * tic80-opc.c: Add file.
2900 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2902 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2904 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2906 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2907 (mn10200_opcodes): Use it for some logicals and btst insns.
2908 Add "break" and "trap" instructions.
2910 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2912 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2914 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2916 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2917 relative load or add now depends upon whether the instruction is
2920 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2922 * mn10200-dis.c: Finish writing disassembler.
2923 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2924 Fix mask for "jmp (an)".
2926 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2927 handle endianness issues for mn10300.
2929 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2931 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2933 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2934 instruction. Fix opcode field for "movb (imm24),dn".
2936 * mn10200-opc.c (mn10200_operands): Fix insertion position
2939 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2941 * mn10200-opc.c: Create mn10200 opcode table.
2942 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2943 but moving along nicely.
2945 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2947 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2949 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2951 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2952 specifiers for fmovem* instructions.
2954 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2956 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2958 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2960 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2963 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2965 * mn10300-opc.c: Add some comments explaining the various
2968 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2970 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2972 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2975 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2976 operand specifiers in fmovm* instructions.
2978 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2980 * ppc-opc.c (insert_li): Give an error if the offset has the two
2981 least significant bits set.
2983 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2985 * mips-dis.c (print_insn_mips16): Separate the instruction from
2986 the arguments with a tab, not a space.
2988 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2990 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2993 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2996 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2998 * configure: Rebuild with autoconf 2.12.
3000 Add support for mips16 (16 bit MIPS implementation):
3001 * mips16-opc.c: New file.
3002 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3003 (mips16_reg_names): New static array.
3004 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3005 after seeing a 16 bit symbol.
3006 (print_insn_little_mips): Likewise.
3007 (print_insn_mips16): New static function.
3008 (print_mips16_insn_arg): New static function.
3009 * mips-opc.c: Add jalx instruction.
3010 * Makefile.in (mips16-opc.o): New target.
3011 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3012 * configure: Rebuild.
3014 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3016 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3017 operand specifiers in *save, *restore and movem* instructions.
3019 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3022 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3023 register operands for immediate arithmetic, not, neg, negx, and
3024 set according to condition instructions.
3026 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3027 specifier of the effective-address operand in immediate forms of
3028 arithmetic instructions. The specifier for the immediate operand
3029 notes how and where the constant will be stored.
3031 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3033 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3036 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3039 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3041 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3043 * mn10300-dis.c (disassemble): Handle register lists.
3045 * mn10300-opc.c: Fix handling of register list operand for
3046 "call", "ret", and "rets" instructions.
3048 * mn10300-dis.c (disassemble): Print PC-relative and memory
3049 addresses symbolically if possible.
3050 * mn10300-opc.c: Distinguish between absolute memory addresses,
3051 pc-relative offsets & random immediates.
3053 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3055 (disassemble): Handle SPLIT and EXTENDED operands.
3057 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3059 * mn10300-dis.c: Rough cut at printing some operands.
3061 * mn10300-dis.c: Start working on disassembler support.
3062 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3064 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3066 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3068 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3070 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3072 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3074 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3075 register argument is calls and jmp instructions.
3077 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3079 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3080 getx operand. Fix opcode for mulqu imm,dn.
3082 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3084 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3085 in MN10300_OPERAND_SPLIT operands for how many bits
3086 appear in the basic insn word. Add IMM32_HIGH24,
3087 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3088 (mn10300_opcodes): Use new operands as needed.
3090 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3091 for bset, bclr, btst instructions.
3092 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3094 * mn10300-opc.c (mn10300_operands): Remove many redundant
3095 operands. Update opcode table as appropriate.
3096 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3097 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3099 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3101 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3102 operands (for indexed load/stores). Fix bitpos for DI
3103 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3104 few instructions that insert immediates/displacements in the
3105 middle of the instruction. Add IMM8E for 8 bit immediate in
3106 the extended part of an instruction.
3107 (mn10300_operands): Use new opcodes as appropriate.
3109 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3111 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3112 sequential so the assembler never parallelizes it with
3115 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3117 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3118 a data/address register that appears in register field 0
3119 and register field 1.
3120 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3122 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3124 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3125 standard disassembly.
3127 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3128 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3129 Recategorize PALcode instructions.
3131 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3133 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3135 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3137 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3138 there are no operand types.
3140 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3142 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3144 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3146 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3148 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3150 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3152 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3153 and sst.w instructions.
3155 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3158 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3160 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3163 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3165 * ppc-opc.c (PPCPWR2): Define.
3166 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3169 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3171 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3172 field for movhu instruction.
3174 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3175 cast value to "long" not "signed long" to keep hpux10
3178 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3180 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3183 * mn10300-opc.c (FMT*): Remove definitions.
3185 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3186 for shift-by-register opcodes.
3188 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3189 into [AD][MN][01] for encoding the position of the register
3192 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3194 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3195 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3197 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3199 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3200 Fix various typos. Add "PAREN" operand.
3201 (MEM, MEM2): Define.
3202 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3203 operands. Fix several typos.
3205 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3208 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3210 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3211 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3213 (mn10300_opcodes): Break opcode format out into its own field.
3214 Update many operand fields to deal with signed vs unsigned
3215 issues. Fix one or two typos in the "mov" instruction
3216 opcode, mask and/or operand fields.
3218 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3220 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3221 m68851 wasn't reset.
3223 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3225 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3226 all opcodes. Very rough cut at operands for all opcodes.
3228 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3231 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3233 * mn10200-opc.c, mn10300-opc.c: New files.
3234 * mn10200-dis.c, mn10300-dis.c: New files.
3235 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3236 * disassemble.c: Break mn10x00 support into 10200 and 10300
3238 * configure.in: Likewise.
3239 * configure: Rebuilt.
3241 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3243 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3245 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3247 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3249 * disassemble (ARCH_mn10x00): Define.
3250 (disassembler): Handle bfd_arch_mn10x00.
3251 * configure.in: Recognize bfd_mn10x00_arch.
3252 * configure: Rebuilt.
3254 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3256 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3257 accordingly. Don't declare functions using op_rtn.
3259 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3261 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3262 params to be more standard.
3263 * (disassemble): Print absolute addresses and symbolic names for
3264 branch and jump targets.
3265 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3267 * (v850_opcodes): Add breakpoint insn.
3269 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3271 * m68k-opc.c: Move the fmovemx data register cases before the
3272 other cases, so that they get recognized before the data register
3273 does gets treated as a degenerate register list.
3275 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3277 * mips-opc.c: Add a case for "div" and "divu" with two registers
3278 and a destination of $0.
3280 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3282 * mips-dis.c (print_insn_arg): Add prototype.
3283 (_print_insn_mips): Ditto.
3285 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3287 * mips-dis.c (print_insn_arg): Print condition code registers as
3290 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3292 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3294 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3296 * v850-dis.c (disassemble): Make static. Provide prototype.
3298 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3300 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3303 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3305 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3306 ']' characters into the output stream.
3307 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3308 Add "memop" field to all opcodes (for the disassembler).
3309 Reorder opcodes so that "nop" comes before "mov" and "jr"
3310 comes before "jarl".
3312 * v850-dis.c (print_insn_v850): Fix typo in last change.
3314 * v850-dis.c (print_insn_v850): Properly handle disassembling
3315 a two byte insn at the end of a memory region when the memory
3316 region's size is only two byte aligned.
3318 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3320 * v850-dis.c (v850_reg_names): Define.
3321 (v850_sreg_names, v850_cc_names): Likewise.
3322 (disassemble): Very rough cut at printing operands (unformatted).
3324 * v850-opc.c (BOP_MASK): Fix.
3325 (v850_opcodes): Fix mask for jarl and jr.
3327 * v850-dis.c: New file. Skeleton for disassembler support.
3328 * Makefile.in Remove v850 references, they're not needed here.
3329 * configure.in: Add v850-dis.o when building v850 toolchains.
3330 * configure: Rebuilt.
3331 * disassemble.c (disassembler): Call v850 disassembler.
3333 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3334 (insert_d8_6, extract_d8_6): New functions.
3335 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3336 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3338 (IF4A, IF4B): Use "D7" instead of "D7S".
3339 (IF4C, IF4D): Use "D8_7" instead of "D8".
3340 (IF4E, IF4F): New. Use "D8_6".
3341 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3342 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3344 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3345 (v850_operands): Change D16 to D16_15, use special insert/extract
3346 routines. New new D16 that uses the generic insert/extract code.
3347 (IF7A, IF7B): Use D16_15.
3348 (IF7C, IF7D): New. Use D16.
3349 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3351 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3352 message. Issue an error if the branch offset is odd.
3354 * v850-opc.c: Add notes about needing special insert/extract
3355 for all the load/store insns, except "ld.b" and "st.b".
3357 * v850-opc.c (insert_d22, extract_d22): New functions.
3358 (v850_operands): Use insert_d22 and extract_d22 for
3360 (insert_d9): Fix range check.
3362 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3364 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3365 and set bits field to D9 and D22 operands.
3367 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3369 * v850-opc.c (v850_operands): Define SR2 operand.
3370 (v850_opcodes): "ldsr" uses R1,SR2.
3372 * v850-opc.c (v850_opcodes): Fix opcode specs for
3373 sld.w, sst.b, sst.h, sst.w, and nop.
3375 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3377 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3378 end of the opcode table.
3380 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3382 * d10v-opc.c (pre_defined_registers): Added register pairs,
3383 "r0-r1", "r2-r3", etc.
3385 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3387 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3388 Create I16U for an unsigned 16bit mmediate operand.
3389 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3391 * v850-opc.c (v850_operands): Define EP operand.
3392 (IF4A, IF4B, IF4C, IF4D): Use EP.
3394 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3395 with immediate operand, "movhi". Tweak "ldsr".
3397 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3398 correct. Get sld.[bhw] and sst.[bhw] closer.
3400 * v850-opc.c (v850_operands): "not" is a two byte insn
3402 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3404 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3406 * v850-opc.c (two): Get order of words correct.
3408 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3410 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3411 register source and destination operands.
3412 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3414 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3415 same thinko in "trap" opcode.
3417 * v850-opc.c (v850_opcodes): Add initializer for size field
3420 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3421 Add D8 for 8-bit unsigned field in short load/store insns.
3422 (IF4A, IF4D): These both need two registers.
3423 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3424 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3425 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3426 for "ldsr" and "stsr".
3427 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3430 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3431 short store word (sst.w).
3433 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3435 * v850-opc.c (v850_operands): Added insert and extract fields,
3436 pointers to functions that handle unusual operand encodings.
3438 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3440 * v850-opc.c (v850_opcodes): Enable "trap".
3442 * v850-opc.c (v850_opcodes): Fix order of displacement
3443 and register for "set1", "clr1", "not1", and "tst1".
3445 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3447 * v850-opc.c (v850_operands): Add "B3" support.
3448 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3451 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3453 * v850-opc.c: Close unterminated comment.
3455 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3457 * v850-opc.c (v850_operands): Add flags field.
3458 (v850_opcodes): add move opcodes.
3460 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3462 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3463 * configure: (bfd_v850v_arch) Add new case.
3464 * configure.in: (bfd_v850_arch) Add new case.
3465 * v850-opc.c: New file.
3467 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3469 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3471 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3473 * d10v-opc.c: Add additional information to the opcode
3474 table to help determinine which instructions can be done
3477 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3479 * mpw-make.sed: Update editing of include pathnames to be
3482 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3484 * arm-opc.h: Added "bx" instruction definition.
3486 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3488 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3490 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3492 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3494 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3496 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3498 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3500 * makefile.vms: Update for alpha-opc changes.
3502 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3504 * i386-dis.c (print_insn_i386): Actually return the correct value.
3505 (ONE, OP_ONE): #ifdef out; not used.
3507 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3509 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3510 Changed subi operand type to treat 0 as 16.
3512 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3514 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3517 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3519 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3520 memory transfer instructions. Add new format string entries %h and %s.
3521 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3524 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3526 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3527 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3529 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3531 * alpha-dis.c (print_insn_alpha_osf): Remove.
3532 (print_insn_alpha_vms): Remove.
3533 (print_insn_alpha): Make globally visible. Chose the register
3534 names based on info->flavour.
3535 * disassemble.c: Always return print_insn_alpha for the alpha.
3537 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3539 * d10v-dis.c (dis_long): Handle unknown opcodes.
3541 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3543 * d10v-opc.c: Changes to support signed and unsigned numbers.
3544 All instructions with the same name that have long and short forms
3545 now end in ".l" or ".s". Divs added.
3546 * d10v-dis.c: Changes to support signed and unsigned numbers.
3548 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3550 * d10v-dis.c: Change all functions to use info->print_address_func.
3552 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3554 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3555 move ccr/sr insns more strict so that the disassembler only
3556 selects them when the addressing mode is data register.
3558 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3559 * d10v-opc.c (pre_defined_registers): Declare.
3560 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3561 to pick a better name for the registers.
3563 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3565 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3566 operands for fexpand and fpmerge. From Christian Kuehnke
3567 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3569 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3571 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3572 print routine. Take new regnames and cpumask arguments.
3573 Kill the environment variable nonsense.
3574 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3575 (print_insn_alpha_vms): New function. Do VMS style regnames.
3576 * disassemble.c (disassembler): Test bfd flavour to pick
3577 between OSF and VMS routines. Default to OSF.
3579 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3581 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3582 * configure: Rebuild.
3583 * Makefile.in (install): Use @INSTALL_SHLIB@.
3585 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3587 * configure: (bfd_d10v_arch) Add new case.
3588 * configure.in: (bfd_d10v_arch) Add new case.
3589 * d10v-dis.c: New file.
3590 * d10v-opc.c: New file.
3591 * disassemble.c (disassembler) Add entry for d10v.
3593 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3595 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3596 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3598 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3600 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3601 distinguish between variants of the instruction set.
3602 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3603 distinguish between variants of the instruction set.
3605 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3607 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3608 the 8086 instruction set.
3609 * i386-dis.c: General cleanups. Make most things static. Add
3610 prototypes. Get rid of static variables aflags and dflags. Pass
3611 them as args (to almost everything).
3613 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3615 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3617 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3619 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3620 if the next arg is marked with SRC_IN_DST. Gross.
3622 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3623 we're looking for and find EXR.
3625 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3626 if we're looking for KBIT and we don't find it.
3628 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3631 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3632 3bit immediate operands.
3634 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3636 * Released binutils 2.7.
3638 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3639 <kkaempf@progis.ac-net.de>.
3641 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3643 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3645 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3647 * sparc-dis.c (print_insn_sparclite): New routine to print
3648 sparclite instructions.
3650 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3652 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3654 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3656 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3657 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3658 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3660 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3662 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3663 Use autoconf-set values.
3664 (docdir, oldincludedir): Removed.
3665 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3667 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3669 * alpha-opc.c: New file.
3670 * alpha-opc.h: Remove.
3671 * alpha-dis.c: Complete rewrite to use new opcode table.
3672 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3673 * configure: Rebuild with autoconf 2.10.
3674 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3675 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3677 (alpha-opc.o): New target.
3679 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3681 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3682 Set imm_added_to_rs1 even if the source and destination register
3685 * sparc-opc.c: Add some two operand forms of the wr instruction.
3687 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3689 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3692 * disassemble.c (disassembler): Handle H8/S.
3693 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3695 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3697 * sparc-opc.c: Add beq/teq as aliases for be/te.
3699 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3700 <sergei@msil.sps.mot.com>.
3702 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3704 * makefile.vms: New file.
3706 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3708 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3710 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3713 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3715 * i386-dis.c (OP_OFF): Call append_prefix.
3717 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3719 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3720 unsigned long to silence a warning from the Solaris PowerPC
3723 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3725 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3727 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3729 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3731 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3732 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3733 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3734 cpush, cpusha, cpull sparclet insns.
3736 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3738 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3740 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3742 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3743 Set F_FLOAT on other floating point instructions.
3745 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3747 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3749 (powerpc_opcodes): Add 860/821 specific SPRs.
3751 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3753 * configure.in: Permit --enable-shared to specify a list of
3754 directories. Set and substitute BFD_PICLIST.
3755 * configure: Rebuild.
3756 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3757 uses. Set to @BFD_PICLIST@.
3759 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3761 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3762 not "abs", which may be needed for the absolute in something
3763 like btst #0,@10:8. Print L_3 immediates separately from other
3764 immediates. Change ABSMOV reference to ABS8MEM.
3766 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3768 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3769 (current_arch_mask): New static global.
3770 (compute_arch_mask): New static function.
3771 (print_insn_sparc): Delete sparc_v9_p. New static local
3772 current_mach. Resort opcode table if current_mach changes.
3773 Generalize "insn not supported" test.
3774 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3775 Delete test for v9/!v9.
3776 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3778 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3779 (brfcx): Renamed to FBRX.
3780 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3781 coprocessor mnemonics are not supported on the sparclet).
3782 (condf): Renamed to CONDF.
3783 (SLCBCC2): Delete F_ALIAS flag.
3785 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3787 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3788 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3790 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3792 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3793 that the shared library version number is set correctly.
3795 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3797 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3798 Miles Bader <miles@gnu.ai.mit.edu>.
3799 * configure: Rebuild.
3801 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3803 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3806 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3808 * configure: Rebuild with autoconf 2.8.
3810 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3812 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3813 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3815 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3817 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3818 since they appear as targets in Makefile.in.
3819 * configure: Rebuild.
3821 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3823 * mpw-make.sed: Edit out shared library support bits.
3825 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3827 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3828 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3829 (sparc_opcodes): Add sparclet insns.
3830 (sparclet_cpreg_table): New static local.
3831 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3832 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3834 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3836 * i386-dis.c (index16): New static variable.
3837 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3839 (OP_indirE): Return result of OP_E.
3840 (OP_E): Check for 16 bit addressing mode, and disassemble
3841 correctly. Optimised 32 bit case a little. Don't print
3842 "(base,index,scale)" when sib specifies only an offset.
3844 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3846 * configure.in: Set and substitute SHLIB_DEP.
3847 * configure: Rebuild.
3848 * Makefile.in (SHLIB_DEP): New variable.
3849 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3850 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3851 COMMON_SHLIB, add them to piclist with appropriate modifications.
3852 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3853 here: just use piclist.
3855 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3857 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3858 (print_insn_sparc): Rewrite v9/not-v9 tests.
3859 (compare_opcodes): Likewise.
3860 * sparc-opc.c (MASK_<ARCH>): Define.
3861 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3862 (sparclet,v6notv9): Define.
3863 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3864 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3866 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3868 * configure.in: Call AC_PROG_CC before configure.host.
3869 * configure: Rebuild.
3871 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3873 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3875 * i386-dis.c (onebyte_has_modrm): New static array.
3876 (twobyte_has_modrm): New static array.
3877 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3879 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3881 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3884 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3886 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3889 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3891 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3892 m68010up, not just m68020up | cpu32.
3894 * Makefile.in (SONAME): New variable.
3895 ($(SHLINK)): Make a link to the transformed name, as well.
3896 (stamp-tshlink): New target.
3897 (install): Skip stamp-tshlink during install.
3899 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3901 * configure.in: Call AC_ARG_PROGRAM.
3902 * configure: Rebuild.
3903 * Makefile.in (program_transform_name): New variable.
3904 (install): Transform library name before installing it.
3906 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3908 * i960-dis.c (mem): Add HX dcinva instruction.
3910 Support for building as a shared library, based on patches from
3911 Alan Modra <alan@spri.levels.unisa.edu.au>:
3912 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3913 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3914 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3915 * configure: Rebuild.
3916 * Makefile.in (ALLLIBS): New variable.
3917 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3918 (COMMON_SHLIB, SHLINK): New variables.
3919 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3920 (STAGESTUFF): Remove variable.
3921 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3922 (stamp-piclist, piclist): New targets.
3923 ($(SHLIB), $(SHLINK)): New targets.
3924 ($(OFILES)): Depend upon stamp-picdir.
3925 (disassemble.o): Build twice if PICFLAG is set.
3926 (MOSTLYCLEAN): Add pic/*.o.
3927 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3928 (distclean): Remove pic and stamp-picdir.
3929 (install): Install shared libraries.
3930 (stamp-picdir): New target.
3932 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3934 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3935 Print unknown instruction as "unknown", rather than in hex.
3937 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3939 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3941 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3943 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3945 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3947 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3948 when necessary. From Ulrich Drepper
3949 <drepper@myware.rz.uni-karlsruhe.de>.
3951 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3953 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3954 sparc_num_opcodes. Update architecture enum values.
3955 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3956 (sparc_opcode_lookup_arch): New function.
3957 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3958 (sparc_opcodes): Add v9a shutdown insn.
3960 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3962 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3963 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3965 (print_insn_sparc64): Deleted.
3966 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3969 * sparc-opc.c (architecture_pname): Add v9a.
3971 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3973 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3974 incorrectly defined as 0x16 when it should be 0x15.
3975 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3976 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3977 excb (exception barrier) which is defined in the Alpha
3978 Architecture Handbook version 2.
3979 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3980 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3981 disassembled as or, for example.
3983 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3985 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3986 (_print_insn_mips): Change i from int to unsigned int.
3988 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3990 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3991 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3993 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3995 * i386-dis.c: Added Pentium Pro instructions.
3997 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3999 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4002 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4004 * sh-opc.h (sh_nibble_type): Added REG_B.
4005 (sh_arg_type): Added A_REG_B.
4006 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4008 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4010 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4012 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4014 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4016 * Makefile.in (distclean): Remove stamp-h. From Ronald
4017 F. Guilmette <rfg@monkeys.com>.
4019 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4021 From David Mosberger-Tang <davidm@azstarnet.com>:
4022 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4025 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4027 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4028 (sh_table): Added many SH3 opcodes.
4029 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4031 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4033 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4034 (subco,subco.): Mark this PPC, not PPCCOM.
4036 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4038 * configure: Rebuild with autoconf 2.7.
4040 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4042 * configure: Rebuild with autoconf 2.6.
4044 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4046 * configure.in: Sort list of architectures. Accept but do nothing
4047 for alliant, convex, pyramid, romp, and tahoe.
4049 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4051 * a29k-dis.c (print_special): Change num to unsigned int.
4053 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4055 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4058 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4060 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4061 * configure: Rebuilt.
4063 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4065 * configure.in: Add case for bfd_i860_arch.
4066 * configure: Rebuild.
4068 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4070 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4071 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4072 (NEXTDOUBLE): Likewise.
4073 (print_insn_m68k): Don't match fmoveml if there is more than one
4074 register in the list.
4075 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4077 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4079 * m68k-opc.c: Use #W rather than #w.
4080 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4082 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4084 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4085 and likewise for all the dbxx opcodes.
4087 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4089 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4091 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4093 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4094 the VR4100 specific instructions to the mips_opcodes structure.
4096 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4098 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4099 ugly Metrowerks bug in CW6, is fixed in CW7.
4101 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4103 * ppc-opc.c (whole file): Add flags for common/any support.
4105 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4107 * Makefile.in (BISON): Remove macro.
4108 (FLAGS_TO_PASS): Remove BISON.
4110 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4112 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4114 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4115 instructions that take no args by looking at the match mask.
4116 (print_insn_arg): Always print "%" before register names.
4117 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4118 [case '_']: Don't print "@#" before address.
4119 [case 'J']: Use "%s" as format string, not register name.
4120 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4122 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4124 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4127 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4129 From David Mosberger-Tang <davidm@azstarnet.com>
4131 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4132 (alpha_insn_set): added definitions for VAX floating point
4133 instructions (Unix compilers don't generate these, but handcoded
4134 assembly might still use them).
4136 * alpha-dis.c (print_insn_alpha): added support for disassembling
4137 the miscellaneous instructions in the Alpha instruction set.
4139 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4141 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4142 no longer create sysdep.h, sed ppc-opc.c to work around a
4143 serious Metrowerks C bug.
4144 * mpw-make.in: Remove.
4145 * mpw-make.sed: New file, used by mpw-configure to edit
4146 Makefile.in into an MPW makefile.
4148 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4150 * Makefile.in (maintainer-clean): New synonym for realclean.
4152 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4154 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4155 which use '0', '1', and '2' instead. Specify the proper size for
4156 a pmove immediate operand. Correct the pmovefd patterns to be
4157 moves to a register, not from a register.
4158 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4160 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4162 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4163 %psr, %wim, %tbr as F_NOTV9.
4165 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4167 * Makefile.in (Makefile): Just rebuild Makefile when running
4169 (config.h, stamp-h): New targets.
4170 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4171 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4172 rebuilding config.h.
4173 * configure: Rebuild.
4175 * mips-opc.c: Change unaligned loads and stores with "t,A"
4176 operands to use "t,A(b)".
4178 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4180 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4182 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4184 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4185 until 3 instead of until 2.
4187 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4189 * Makefile.in (ALL_CFLAGS): Define.
4190 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4191 (MOSTLYCLEAN): Add config.log.
4192 (distclean): Don't remove config.log.
4193 * configure.in: Substitute HDEFINES.
4194 * configure: Rebuild.
4196 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4198 * sh-opc.h (sh_arg_type): Add F_FR0.
4199 (sh_table, case fmac): Add F_FR0 as first argument.
4201 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4203 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4205 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4207 * sparc-dis.c: Remove all references to NO_V9.
4209 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4211 * aclocal.m4: Just include ../bfd/aclocal.m4.
4212 * configure: Rebuild.
4214 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4216 * sparc-dis.c (X_DISP19): Define.
4217 (print_insn, case 'G'): Use it.
4218 (print_insn, case 'L'): Sign extend displacement.
4220 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4222 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4223 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4224 host_makefile_frag or frags.
4225 * aclocal.m4: New file.
4226 * configure: Rebuild.
4227 * Makefile.in (INSTALL): Set to @INSTALL@.
4228 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4229 (INSTALL_DATA): Set to @INSTALL_DATA@.
4231 (AR_FLAGS): Set to rc rather than qc.
4232 (CC): Define as @CC@.
4233 (CFLAGS): Set to @CFLAGS@.
4234 (@host_makefile_frag@): Remove.
4235 (config.status): Remove dependency upon @frags@.
4237 * configure.in: ../bfd/config.bfd now just sets shell variables.
4238 Use them rather than looking through target Makefile fragments.
4239 * configure: Rebuild.
4241 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4243 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4245 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4247 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4248 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4251 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4252 (lookup_{name,value}): New functions.
4253 (prefetch_table): New static local.
4254 (sparc_{encode,decode}_prefetch): New functions.
4255 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4257 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4259 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4262 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4264 * sh-dis.c: Correct comment on first line of file.
4266 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4268 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4270 * sparc-opc.c (asi, membar): New static locals.
4271 (sparc_{encode,decode}_{asi,membar}): New functions.
4272 (sparc_opcodes, membar insn): Fix.
4273 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4274 Support decoding of membar masks.
4277 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4279 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4281 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4283 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4284 and likewise for the other branches. Add bhs as an alias for bcc,
4285 and likewise for the size variants. Add dbhs as an alias for
4288 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4290 * sh-opc.h (FP sts instructions): Update to match reality.
4292 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4294 * m68k-dis.c: (fpcr_names): Add % before all register names.
4295 (reg_names): Likewise.
4296 (print_insn_arg): Don't explicitly print % before register names.
4297 Add % before register names in static array names. In case 'r',
4298 print data registers as `@(Dn)', not `Dn@'. When printing a
4299 memory address, don't print @# before it.
4300 (print_indexed): Change base_disp and outer_disp from int to
4301 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4302 syntax. Sign extend 8 byte displacement correctly.
4303 (print_base): Print using MIT syntax. Print zpc when appropriate.
4304 Change parameter disp from int to bfd_vma.
4306 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4309 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4311 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4312 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4313 * sh-opc.h (sh_arg_type): Add new operand types.
4314 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4316 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4318 * Makefile.in (distclean): Remove generated file config.h.
4320 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4322 * Makefile.in (distclean): Remove generated file config.h.
4324 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4326 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4328 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4330 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4331 rather than numopcodes. Use m68k_opcodes rather than removed
4332 opcode function. Don't check F_ALIAS.
4333 (print_insn_arg): Change first parameter to be const char *.
4334 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4335 (m68k-opc.o): New target.
4336 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4337 * configure: Rebuild.
4339 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4341 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4342 (opcode_bits, opcode_hash_table): New variables.
4343 (opcodes_initialized): Renamed from opcodes_sorted.
4344 (build_hash_table): New function.
4345 (is_delayed_branch): Use hash table.
4346 (print_insn): Renamed from print_insn_sparc, made static.
4347 Build and use hash table. If !sparc64, ignore sparc64 insns,
4348 and vice-versa if sparc64.
4349 (print_insn_sparc, print_insn_sparc64): New functions.
4350 (compare_opcodes): Move sparc64 opcodes to end.
4351 Print commutative insns with constant second.
4352 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4354 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4356 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4357 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4358 avoids printing a delay slot in a delay slot.
4359 * sh-opc.h (sh_table): Fully bracket last entry.
4361 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4363 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4365 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4367 * configure.in: Get host_makefile_frag from ${srcdir}.
4369 * configure.in: Autoconfiscated. Check for string[s].h. Create
4370 config.h from config.in. Don't set up sysdep.h link.
4371 * sysdep.h: New file.
4372 * configure, config.in: New files, generated from configure.in.
4373 * Makefile.in: Updated to be processed autoconf-style.
4374 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4375 (Makefile): Depend on config.status.
4376 (config.status): New rule.
4377 * configure.bat: Update Makefile substitutions.
4379 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4381 * mips-opc.c (L1): Define.
4382 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4383 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4386 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4388 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4389 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4390 have multiple add units but only a single logical unit.
4392 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4393 shifted by 18, without any insertion or extraction function.
4394 (insert_cr, extract_cr): Remove.
4396 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4398 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4401 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4403 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4404 * sh-opc.h: Add copyright.
4406 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4408 * Makefile.in (crunch-m68k): Delete extra target accidentally
4409 checked in a while ago.
4411 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4413 * sh-opc.h (sh_table): Add SH3 support.
4415 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4417 * sh-opc.h: Added bsrf and braf.
4419 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4421 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4422 bogus [ls]fm{ea,fd} patterns.
4424 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4425 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4426 initialize it from memory. Make function static.
4427 (print_insn_{big,little}_arm): New functions.
4428 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4429 the correct endianness.
4431 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4433 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4436 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4438 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4439 17th, so that it builds again using GCC as the compiler.
4441 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4443 * mips-dis.c (print_insn_little_mips): Cast return value from
4444 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4445 expects an unsigned long, and that might be fewer words of
4446 argument storage (e.g., if bfd_vma is long long on a 32-bit
4448 (print_insn_big_mips): Likewise with bfd_getb32 value.
4449 (_print_insn_mips): Now static.
4451 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4453 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4454 gcc memory hog problem with initializer is fixed.
4456 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4458 Merge in support for Mac MPW as a host.
4459 (Old change descriptions retained for informational value.)
4461 * mpw-config.in (archname): Compute from the config.
4462 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4464 * mpw-config.in (target_arch): Compute from canonical target.
4465 (m68k, mips, powerpc, sparc): Add architectures.
4466 * mpw-make.in (disassemble.c.o): Add.
4467 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4469 * mpw-config.in (BFD_MACHINES): Set to a default value.
4470 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4472 * mpw-make.in (CSEARCH): Add extra-include to search path.
4474 * mpw-config.in (varargs.h): Don't create.
4475 (sysdep.h): Create using forward-include.
4476 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4478 * mpw-config.in: New file, MPW version of configure.in.
4479 * mpw-make.in: New file, MPW version of Makefile.in.
4481 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4483 * alpha-dis.c (print_insn_alpha): Put empty statement after
4486 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4488 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4489 (low_sign_extend): Likewise.
4490 (get_field): Delete unused function.
4491 (set_field, deposit_14, deposit_21): Likewise.
4493 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4495 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4498 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4500 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4502 * alpha-opc.h (OSF_ASMCODE): define
4503 print pal-code names as defined in App C of the
4504 Alpha Architecture Reference Manual
4506 * alpha-dis.c: cleaned up output
4507 print stylized code forms as defined in App A.4.3 of the
4508 Alpha Architecture Reference Manual
4510 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4512 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4514 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4517 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4519 * m68k-dis.c (opcode): New function. Returns address of opcode
4520 table entry given index, even if the opcode table was split to
4521 work around gcc bugs.
4522 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4524 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4525 (reg_names): Now const.
4526 (print_insn_arg): Arrays cacheFieldName and names now const.
4527 (print_indexed): Array scales now const.
4529 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4531 * ppc-opc.c: Sort recently added instructions by minor opcode
4532 number within major opcode number.
4534 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4536 * hppa-dis.c: Include libhppa.h.
4538 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4540 * mips-opc.c: Change dli to use M_DLI, and add dla.
4542 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4544 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4546 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4548 * mips-opc.c: Add r4650 mul instruction.
4550 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4552 * mips-opc.c: Add uld and usd macros for unaligned double load and
4555 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4557 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4558 mfdcr, mtdcr, icbt, iccci.
4560 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4562 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4563 signed char fields to shorts, more portable.
4565 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4567 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4568 char fields as signed chars, since they may have negative values.
4570 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4572 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4573 (mycroft@netbsd.org).
4575 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4577 From "Logg, Ed" <elogg@ea.com>:
4578 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4579 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4582 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4584 * ppc-opc.c: Changes based on patch from David Edelsohn
4585 <edelsohn@mhpcc.edu>.
4586 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4589 (insert_tbr): New static function.
4590 (extract_tbr): New static function.
4591 (XFXFXM_MASK, XFXM): Define.
4592 (XSPRBAT_MASK, XSPRG_MASK): Define.
4593 (powerpc_opcodes): Add instructions to access special registers by
4594 name. Add mtcr and mftbu.
4596 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4598 * mips-opc.c (P3): Define.
4599 (mips_opcodes): Add mad and madu.
4601 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4603 * configure.in: Add W65 support.
4604 * disassemble.c: Likewise.
4605 * w65-opc.h, w65-dis.c: New files.
4607 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4609 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4612 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4614 * mips-opc.c: Add dli as a synonym for li.
4616 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4618 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4619 print something for reserved opcode values, even if it won't
4622 * mips-dis.c (_print_insn_mips): When initializing, shift right
4623 and mask, to avoid sign extension problems on the Alpha.
4625 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4628 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4630 * sh-opc.h (mov.l gbr): Get direction right.
4631 * sh-dis.c (print_insn_shx): New function.
4632 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4633 print opcodes with right byte order.
4635 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4637 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4638 to avoid conflicts with getopt.
4640 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4642 * hppa-dis.c (print_insn_hppa): Read the instruction using
4643 bfd_getb32, so that it works on a little endian or 64 bit host.
4644 Remove unused local variable op.
4646 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4648 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4649 addu does not work correctly if -mips3.
4651 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4653 * a29k-dis.c (print_special): Add special register names defined
4654 on 29030, 29040 and 29050.
4655 (print_insn): Handle new operand type 'I'.
4657 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4659 * Makefile.in (INSTALL): Use top level install.sh script.
4661 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4663 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4664 that it works on a little endian host.
4666 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4668 * configure.in: Use ${config_shell} when running config.bfd.
4670 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4672 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4674 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4676 * a29k-dis.c (print_insn): Print the opcode.
4678 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4680 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4682 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4684 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4686 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4688 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4689 which store a value into memory.
4691 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4693 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4694 * arm-dis.c, arm-opc.h: New files.
4696 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4698 * Makefile.in (ns32k-dis.o): Add dependency.
4699 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4700 string, not as array of chars.
4702 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4704 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4706 * sparc-opc.c: Added sparclite extended FP operations, and
4707 versions of v9 impdep* instructions permitting specification of
4710 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4712 * i960-dis.c (reg_names): Now const.
4713 (struct sparse_tabent): New type, copied from array type in mem
4715 (ctrl): Local static array ctrl_tab now const.
4716 (cobr): Local static array cobr_tab now const.
4717 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4718 static variable mem_tab no longer explicitly initialized. Changed
4719 mem_init to const array of struct sparse_tabent.
4720 (reg): Local static variable reg_tab no longer explicitly
4721 initialized. Changed reg_init to const array of struct
4723 (ea): Local static array scale_tab now const.
4725 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4728 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4730 * configure.bat: the disassember needs to be enabled for
4731 "objdump -d" to work in djgpp.
4733 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4735 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4736 (invalid_float): Enabled general version, doesn't require running
4737 on ns32k host. Changed to take char* argument, and test for
4738 explicitly specified sizes, instead of using sizeof() on host CPU
4740 (INVALID_FLOAT): Cast first argument.
4741 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4742 list_P032, list_M032): Now const.
4743 (optlist, list_search): Made appropriate arguments now point to
4745 (print_insn_arg): Changed static array of one-character-string
4746 pointers into a static const array of characters; fixed sprintf
4747 statement accordingly.
4749 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4751 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4752 from distribution. A ns32k-dis.c from a previous distribution has
4753 been brought up to date and supports the new interface.
4755 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4757 * configure.in: add bfd_ns32k_arch target support.
4759 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4760 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4762 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4764 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4767 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4769 * h8300-dis.c, mips-dis.c: Don't use true and false.
4771 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4773 * configure.in: Change --with-targets to --enable-targets.
4775 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4777 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4778 opcodes to the first instruction with that opcode, to speed
4779 disassembly of large files. From ralphc@pyramid.com (Ralph
4782 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4784 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4786 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4788 * configure.bat: update to latest makefile.in
4790 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4792 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4793 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4794 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4795 slot insn is in a delay slot.
4796 * z8k-opc.h: (resflg): Fix patterns.
4797 * h8500-opc.h Fix CR insn patterns.
4799 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4801 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4802 "cmpl" before POWER versions, so that gas -many uses them.
4804 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4806 * disassemble.c: New file.
4807 * Makefile.in (OFILES): Add disassemble.o.
4808 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4809 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4810 binutils/configure.in.
4812 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4813 opcode being examined.
4815 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4817 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4818 (insert_ral, insert_ram, insert_ras): New functions.
4819 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4820 RAS for store with update.
4822 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4824 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4825 (edelsohn@npac.syr.edu).
4827 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4829 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4832 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4834 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4836 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4838 * ppc-opc.c (powerpc_operands): The signedp field has been
4839 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4840 instead. Add new operand SISIGNOPT.
4841 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4842 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4843 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4846 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4848 * i386-dis.c (struct private): Renamed to dis_private. `private'
4849 is a reserved word for dynix cc.
4851 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4853 * configure.in: Change error message to refer to bfd/config.bfd
4854 rather than bfd/configure.in.
4856 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4858 * ppc-opc.c: Define POWER2 as short alias flag.
4859 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4862 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4864 * i960-dis.c (print_insn_i960): Don't read a second word for
4865 opcodes 0, 1, 2 and 3.
4867 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4869 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4871 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4873 * m68881-ext.c: Removed; no longer used.
4874 * Makefile.in: Changed accordingly.
4876 * m68k-dis.c (ext_format_68881): Don't declare.
4877 (print_insn_m68k): If an instruction uses place 'i', it uses at
4878 least four fixed bytes.
4879 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4880 extended float, convert to double using floatformat_to_double, not
4881 ieee_extended_to_double, and fetch the data before converting it.
4883 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4885 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4886 davidj@ICSI.Berkeley.EDU (David Johnson).
4888 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4890 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4891 PowerPC uses bdnz[l][a].
4893 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4895 * dis-buf.c, i386-dis.c: Include sysdep.h.
4897 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4899 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4901 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4902 by Motorola PowerPC 601 with PPC_OPCODE_601.
4903 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4904 Disassemble Motorola PowerPC 601 instructions as well as normal
4905 PowerPC instructions.
4907 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4909 * i960-dis.c (reg, mem): Just use a static array instead of
4912 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4914 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4915 condition name index if this is for a negated condition.
4917 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4918 Floating point format for 'H' operand is backwards from normal
4919 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4920 operands (fmpyadd and fmpysub), handle bizarre register
4921 translation correctly for single precision format.
4923 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4924 or 'I' operands if the next format specifier is 'M' (fcmp
4925 condition completer).
4927 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4929 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4930 single number giving a bitmask for the MB and ME fields of an M
4931 form instruction. Change NB to accept 32, and turn it into 0;
4932 also turn 0 into 32 when disassembling. Seperated SH from NB.
4933 (insert_mbe, extract_mbe): New functions.
4934 (insert_nb, extract_nb): New functions.
4935 (SC_MASK): Mask out SA and LK bits.
4936 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4937 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4938 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4939 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4940 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4941 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4942 (powerpc_macros): Define table of macro definitions.
4943 (powerpc_num_macros): Define.
4945 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4946 if PPC_OPERAND_NEXT is set.
4948 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4950 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4951 char. Retrieve contents using bfd_getl32 instead of shifting.
4953 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4955 * ppc-opc.c: New file. Opcode table for PowerPC, including
4956 opcodes for POWER (RS/6000).
4957 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4958 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4959 (CFILES): Add ppc-dis.c.
4960 (ppc-dis.o, ppc-opc.o): New targets.
4961 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4963 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4965 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4966 No space before 'u', 'f', or 'N'.
4968 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4970 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4971 farther than we should.
4973 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4975 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4977 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4979 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4981 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4982 needs it, to prevent reading past the end of a section.
4984 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4986 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4987 Removed t,A case for la; always use t,A(b) case.
4989 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4991 From Ted Lemen <mellon@pepper.ncd.com>
4992 * mips-dis.c (print_insn_arg): Handle 'k'.
4993 * mips-opc.c: Make cache use k, not t.
4995 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4997 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4998 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4999 FLOAT_FORMAT_CODE to put out floating point register names.
5001 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5003 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5005 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5007 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5009 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5011 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5012 larger than 32. Moved dsxx32 variants first for disassembler.
5014 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5016 * z8kgen.c, z8k-opc.h: Add full lda information.
5018 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5020 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5021 movb instructions. Any necessary space will be emitted by
5022 the code to handle nullification completers.
5024 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5026 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5028 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5030 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5031 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5033 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5035 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5037 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5039 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5040 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5042 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5044 * m88k-dis.c (m88kdis): comment change. Remove space after
5046 (printop): handle new arg types DEC and XREG for m88110.
5048 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5050 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5051 type for absolute branch addresses. Delete special
5052 "ble" and "be" code in 'W' operand code.
5054 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5056 * mips-opc.c: Set hazard information correctly for branch
5057 likely instructions.
5059 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5061 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5062 info->fprintf_func for printing and info->print_address_func for
5065 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5067 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5069 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5071 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5072 Corrected second case of "b" for disassembler.
5074 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5076 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5077 to BFD swapping routines to correspond to BFD name changes.
5079 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5081 * mips-opc.c: Change div machine instruction to be z,s,t rather
5082 than s,t. Change div macro to be d,v,t rather than d,s,t.
5083 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5084 rem and remu which generates only the corresponding div
5085 instruction. This is for compatibility with the MIPS assembler,
5086 which only generates the simple machine instruction when an
5087 explicit destination of $0 is used.
5088 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5090 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5092 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5093 WR_31 hazard for bal, bgezal, bltzal.
5095 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5097 * hppa-dis.c (print_insn_hppa): Use print function
5098 from within the disassemble_info, not fprintf_filtered.
5100 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5102 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5103 Law, law@cs.utah.edu.)
5105 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5107 * mips-opc.c ("absu"): Removed.
5110 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5112 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5113 Changed hazard information to distinguish between memory load
5114 delays and coprocessor load delays.
5116 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5118 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5120 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5122 * configure.in: Don't pass cpu to config.bfd.
5124 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5126 * m88k-dis.c (m88kdis): Make class unsigned.
5128 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5130 * alpha-dis.c (print_insn_alpha): One branch format case was
5131 missing the instruction name.
5133 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5135 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5136 Add the arch-specific auxiliary files.
5137 (OFILES): Remove the arch-specific auxiliary files
5138 and use BFD_MACHINES instead of DIS_LIBS.
5139 * configure.in: Set BFD_MACHINES based on --with-targets option.
5141 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5143 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5146 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5148 * sparc-opc.c: Change CONST to const to deal with gcc
5149 -Dconst=__const -traditional.
5151 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5153 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5154 coprocessor instructions out of #if 0, and made them use new
5157 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5159 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5161 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5163 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5164 instruction, for use by the disassembler.
5166 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5167 hand-coded sign extensions that depended on 32-bit host ints.
5168 FIXME, we still depend on big-endian host bitfield ordering.
5169 (sparc_print_insn): Set the insn_info_valid field, and the
5170 other fields that describe the instruction being printed.
5172 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5174 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5175 `jmp' instead of just one of them.
5177 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5179 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5180 (fput_fp_reg_r): Renamed from fput_reg_r.
5181 (fput_fp_reg): New function.
5182 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5184 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5186 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5188 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5190 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5192 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5193 don't output a space.
5195 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5197 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5199 * mips-opc.c: New file, containing opcode table from
5200 ../include/opcode/mips.h.
5201 * Makefile.in: Add it.
5203 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5205 * m88k-dis.c: New file, moved in from gdb and changed to use the
5206 new dis-asm.h disassembler interface.
5207 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5208 (m88k-dis.o): New target.
5210 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5212 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5213 argument string const char * to correspond to opcode/mips.h.
5215 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5217 * mips-dis.c: Updated to account for name changes in new version
5219 * Makefile.in: Added header file dependencies.
5221 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5223 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5225 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5227 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5228 extend, rather than shifts.
5230 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5232 * Makefile.in: Undo 15 June change.
5234 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5236 * m68k-dis.c (print_insn_arg): Change return value to byte count
5238 * m68k-dis.c: Re-write to detect invalid operands before
5239 printing anything, so we can handle this the same way we
5240 handle invalid opcodes.
5242 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5244 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5246 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5248 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5251 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5253 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5255 * configure.in: Do make sysdep.h link.
5256 * Makefile.in: Search ../include. Don't search ../bfd.
5258 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5260 Changes from Jeff Law, law@cs.utah.edu:
5261 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5262 Do not print a space before the completers specified by
5265 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5267 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5268 defined, since gdb has been fixed.
5270 Changes from Jeff Law, law@cs.utah.edu:
5271 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5272 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5273 be a *disassemble_info, not a *FILE.
5274 * hppa-dis.c: Support 'd', '!', and 'a'.
5275 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5276 * hppa-dis.c: Delete cases which are no longer needed.
5278 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5280 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5282 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5284 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5287 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5289 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5290 * configure.in: No longer need to configure to get sysdep.h.
5292 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5294 * Patches from Jeffrey Law <law@cs.utah.edu>.
5295 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5296 templates for 1.1 FP computational instructions.
5298 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5300 * h8500-dis.c (print_insn_h8500): Address argument is type
5302 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5305 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5306 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5308 * sparc-dis.c (compare_opcodes): Move static declaration to
5311 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5313 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5314 instruction, remove unimp hack from 'l' argument.
5316 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5318 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5321 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5323 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5324 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5327 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5329 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5330 arrays of string pointers to 2-d arrays of chars, to save
5333 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5335 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5336 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5338 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5340 * hppa-dis.c: New file from Utah, adapted to new disassembler
5342 * Makefile.in: Include it.
5344 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5346 * sh-dis.c, sh-opc.h: New files.
5348 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5350 * alpha-dis.c, alpha-opc.h: New files.
5352 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5354 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5357 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5359 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5361 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5363 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5366 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5368 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5369 and double percent signs a few places.
5371 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5373 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5374 Use info->print_address_func not print_address.
5376 * dis-buf.c (generic_print_address): New function.
5378 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5380 * Makefile.in: Add sparc-dis.c.
5381 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5383 Add `add' instruction to the set that get checked
5384 for a preceding `sethi' in order to print an absolute address.
5385 * (print_insn): Disassembly prefers real instructions.
5386 (is_delayed_branch): Speed up.
5387 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5388 Still missing some float ops, and needs testing.
5389 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5390 F_ALIAS. Use printf, not fprintf, when not passing a file
5392 (compare_opcodes): Check that identical instructions have
5393 identical opcodes, complain otherwise.
5396 * Include reg_names.
5398 Use dis-asm.h/read_memory_func interface.
5400 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5402 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5403 deliberately return non-zero to setjmp from longjmp. Otherwise
5404 this code fails to compile.
5406 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5408 * m68k-dis.c: Fix prototype for fetch_arg().
5410 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5412 * dis-buf.c: New file, for new read_memory_func interface.
5413 Makefile.in (OFILES): Include it.
5414 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5415 Use new read_memory_func interface.
5417 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5419 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5420 * h8500-opc.h: Fix couple of opcodes.
5422 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5424 * Makefile.in: add dvi & installcheck targets
5426 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5428 * Makefile.in: Update for h8500-dis.c.
5430 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5432 * h8500-dis.c, h8500-opc.h: New files
5434 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5436 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5437 ../include/dis-asm.h.
5438 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5439 and ../gdb/m68k-pinsn.c).
5440 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5441 and ../gdb/i386-pinsn.c).
5442 * m68881-ext.c: New file. Moved definition of
5443 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5444 * Makefile.in: Adjust for new files.
5445 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5446 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5447 can be dis-assembled.
5449 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5451 * mips-dis.c (print_insn_arg): Now returns void.
5453 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5455 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5456 files that use the macros.
5458 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5460 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5461 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5462 (CFILES): Added mips-dis.c.
5464 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5466 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5467 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5469 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5471 * Makefile.in: Improve *clean rules.
5472 * configure.in: Allow a default host.
5474 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5476 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5477 files include other sysdep files
5479 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5481 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5483 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5485 * configure.in: For host support, use ../bfd/configure.host
5486 so it stays in sync with the ../bfd/hosts database.
5488 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5490 * configure.in: use cpu-vendor-os triple instead of nested cases
5492 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5494 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5495 *always* the wrong one.
5497 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5499 * z8kgen.c: added copyright info
5501 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5503 * z8k-dis.c (unparse_instr): prettier tabs
5504 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5506 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5508 * configure.in: Add ncr* configuration.
5509 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5510 picayune ANSI compilers happy.
5512 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5514 * configure.in (i386): Make i386 and i486 synonymous for now.
5515 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5517 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5519 * Makefile.in (install): Fix typo.
5521 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5523 * Makefile.in (make): Remove obsolete crud.
5524 (sparc-opc.o): Avoid Sun Make VPATH bug.
5526 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5528 * Makefile.in: since there are no SUBDIRS, remove rule and
5529 references of subdir_do.
5531 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5533 * Makefile.in (install): Get the library name right here too.
5534 Don't install bfd.h, since it's unrelated to this library. No
5535 subdirs to recurse into, either.
5536 (CFILES): The source file has a .c suffix, not .o.
5538 * sparc-opc.c: New file, moved from BFD.
5539 * Makefile.in (OFILES): Build it.
5541 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5543 * z8k-dis.c: fixed forward refferences of some declarations.
5545 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5547 * Makefile.in: get the name of the library right
5549 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5551 * z8k-dis.c: knows how to disassemble z8k stuff
5552 * z8k-opc.h: new file full of z8000 opcodes
5556 version-control: never