1 // SPDX-License-Identifier: GPL-2.0
3 * This file contains helper code to handle channel
4 * settings and keeping track of what is possible at
7 * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
8 * Copyright 2013-2014 Intel Mobile Communications GmbH
9 * Copyright 2018-2021 Intel Corporation
12 #include <linux/export.h>
13 #include <linux/bitfield.h>
14 #include <net/cfg80211.h>
18 static bool cfg80211_valid_60g_freq(u32 freq)
20 return freq >= 58320 && freq <= 70200;
23 void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
24 struct ieee80211_channel *chan,
25 enum nl80211_channel_type chan_type)
31 chandef->freq1_offset = chan->freq_offset;
32 chandef->center_freq2 = 0;
33 chandef->edmg.bw_config = 0;
34 chandef->edmg.channels = 0;
37 case NL80211_CHAN_NO_HT:
38 chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
39 chandef->center_freq1 = chan->center_freq;
41 case NL80211_CHAN_HT20:
42 chandef->width = NL80211_CHAN_WIDTH_20;
43 chandef->center_freq1 = chan->center_freq;
45 case NL80211_CHAN_HT40PLUS:
46 chandef->width = NL80211_CHAN_WIDTH_40;
47 chandef->center_freq1 = chan->center_freq + 10;
49 case NL80211_CHAN_HT40MINUS:
50 chandef->width = NL80211_CHAN_WIDTH_40;
51 chandef->center_freq1 = chan->center_freq - 10;
57 EXPORT_SYMBOL(cfg80211_chandef_create);
59 static bool cfg80211_edmg_chandef_valid(const struct cfg80211_chan_def *chandef)
61 int max_contiguous = 0;
62 int num_of_enabled = 0;
66 if (!chandef->edmg.channels || !chandef->edmg.bw_config)
69 if (!cfg80211_valid_60g_freq(chandef->chan->center_freq))
72 for (i = 0; i < 6; i++) {
73 if (chandef->edmg.channels & BIT(i)) {
80 max_contiguous = max(contiguous, max_contiguous);
82 /* basic verification of edmg configuration according to
83 * IEEE P802.11ay/D4.0 section 9.4.2.251
85 /* check bw_config against contiguous edmg channels */
86 switch (chandef->edmg.bw_config) {
87 case IEEE80211_EDMG_BW_CONFIG_4:
88 case IEEE80211_EDMG_BW_CONFIG_8:
89 case IEEE80211_EDMG_BW_CONFIG_12:
90 if (max_contiguous < 1)
93 case IEEE80211_EDMG_BW_CONFIG_5:
94 case IEEE80211_EDMG_BW_CONFIG_9:
95 case IEEE80211_EDMG_BW_CONFIG_13:
96 if (max_contiguous < 2)
99 case IEEE80211_EDMG_BW_CONFIG_6:
100 case IEEE80211_EDMG_BW_CONFIG_10:
101 case IEEE80211_EDMG_BW_CONFIG_14:
102 if (max_contiguous < 3)
105 case IEEE80211_EDMG_BW_CONFIG_7:
106 case IEEE80211_EDMG_BW_CONFIG_11:
107 case IEEE80211_EDMG_BW_CONFIG_15:
108 if (max_contiguous < 4)
116 /* check bw_config against aggregated (non contiguous) edmg channels */
117 switch (chandef->edmg.bw_config) {
118 case IEEE80211_EDMG_BW_CONFIG_4:
119 case IEEE80211_EDMG_BW_CONFIG_5:
120 case IEEE80211_EDMG_BW_CONFIG_6:
121 case IEEE80211_EDMG_BW_CONFIG_7:
123 case IEEE80211_EDMG_BW_CONFIG_8:
124 case IEEE80211_EDMG_BW_CONFIG_9:
125 case IEEE80211_EDMG_BW_CONFIG_10:
126 case IEEE80211_EDMG_BW_CONFIG_11:
127 if (num_of_enabled < 2)
130 case IEEE80211_EDMG_BW_CONFIG_12:
131 case IEEE80211_EDMG_BW_CONFIG_13:
132 case IEEE80211_EDMG_BW_CONFIG_14:
133 case IEEE80211_EDMG_BW_CONFIG_15:
134 if (num_of_enabled < 4 || max_contiguous < 2)
144 static int nl80211_chan_width_to_mhz(enum nl80211_chan_width chan_width)
148 switch (chan_width) {
149 case NL80211_CHAN_WIDTH_1:
152 case NL80211_CHAN_WIDTH_2:
155 case NL80211_CHAN_WIDTH_4:
158 case NL80211_CHAN_WIDTH_8:
161 case NL80211_CHAN_WIDTH_16:
164 case NL80211_CHAN_WIDTH_5:
167 case NL80211_CHAN_WIDTH_10:
170 case NL80211_CHAN_WIDTH_20:
171 case NL80211_CHAN_WIDTH_20_NOHT:
174 case NL80211_CHAN_WIDTH_40:
177 case NL80211_CHAN_WIDTH_80P80:
178 case NL80211_CHAN_WIDTH_80:
181 case NL80211_CHAN_WIDTH_160:
184 case NL80211_CHAN_WIDTH_320:
194 static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c)
196 return nl80211_chan_width_to_mhz(c->width);
199 bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
201 u32 control_freq, oper_freq;
202 int oper_width, control_width;
207 if (chandef->freq1_offset >= 1000)
210 control_freq = chandef->chan->center_freq;
212 switch (chandef->width) {
213 case NL80211_CHAN_WIDTH_5:
214 case NL80211_CHAN_WIDTH_10:
215 case NL80211_CHAN_WIDTH_20:
216 case NL80211_CHAN_WIDTH_20_NOHT:
217 if (ieee80211_chandef_to_khz(chandef) !=
218 ieee80211_channel_to_khz(chandef->chan))
220 if (chandef->center_freq2)
223 case NL80211_CHAN_WIDTH_1:
224 case NL80211_CHAN_WIDTH_2:
225 case NL80211_CHAN_WIDTH_4:
226 case NL80211_CHAN_WIDTH_8:
227 case NL80211_CHAN_WIDTH_16:
228 if (chandef->chan->band != NL80211_BAND_S1GHZ)
231 control_freq = ieee80211_channel_to_khz(chandef->chan);
232 oper_freq = ieee80211_chandef_to_khz(chandef);
233 control_width = nl80211_chan_width_to_mhz(
234 ieee80211_s1g_channel_width(
236 oper_width = cfg80211_chandef_get_width(chandef);
238 if (oper_width < 0 || control_width < 0)
240 if (chandef->center_freq2)
243 if (control_freq + MHZ_TO_KHZ(control_width) / 2 >
244 oper_freq + MHZ_TO_KHZ(oper_width) / 2)
247 if (control_freq - MHZ_TO_KHZ(control_width) / 2 <
248 oper_freq - MHZ_TO_KHZ(oper_width) / 2)
251 case NL80211_CHAN_WIDTH_80P80:
252 if (!chandef->center_freq2)
254 /* adjacent is not allowed -- that's a 160 MHz channel */
255 if (chandef->center_freq1 - chandef->center_freq2 == 80 ||
256 chandef->center_freq2 - chandef->center_freq1 == 80)
260 if (chandef->center_freq2)
265 switch (chandef->width) {
266 case NL80211_CHAN_WIDTH_5:
267 case NL80211_CHAN_WIDTH_10:
268 case NL80211_CHAN_WIDTH_20:
269 case NL80211_CHAN_WIDTH_20_NOHT:
270 case NL80211_CHAN_WIDTH_1:
271 case NL80211_CHAN_WIDTH_2:
272 case NL80211_CHAN_WIDTH_4:
273 case NL80211_CHAN_WIDTH_8:
274 case NL80211_CHAN_WIDTH_16:
275 /* all checked above */
277 case NL80211_CHAN_WIDTH_320:
278 if (chandef->center_freq1 == control_freq + 150 ||
279 chandef->center_freq1 == control_freq + 130 ||
280 chandef->center_freq1 == control_freq + 110 ||
281 chandef->center_freq1 == control_freq + 90 ||
282 chandef->center_freq1 == control_freq - 90 ||
283 chandef->center_freq1 == control_freq - 110 ||
284 chandef->center_freq1 == control_freq - 130 ||
285 chandef->center_freq1 == control_freq - 150)
288 case NL80211_CHAN_WIDTH_160:
289 if (chandef->center_freq1 == control_freq + 70 ||
290 chandef->center_freq1 == control_freq + 50 ||
291 chandef->center_freq1 == control_freq - 50 ||
292 chandef->center_freq1 == control_freq - 70)
295 case NL80211_CHAN_WIDTH_80P80:
296 case NL80211_CHAN_WIDTH_80:
297 if (chandef->center_freq1 == control_freq + 30 ||
298 chandef->center_freq1 == control_freq - 30)
301 case NL80211_CHAN_WIDTH_40:
302 if (chandef->center_freq1 == control_freq + 10 ||
303 chandef->center_freq1 == control_freq - 10)
310 /* channel 14 is only for IEEE 802.11b */
311 if (chandef->center_freq1 == 2484 &&
312 chandef->width != NL80211_CHAN_WIDTH_20_NOHT)
315 if (cfg80211_chandef_is_edmg(chandef) &&
316 !cfg80211_edmg_chandef_valid(chandef))
321 EXPORT_SYMBOL(cfg80211_chandef_valid);
323 static void chandef_primary_freqs(const struct cfg80211_chan_def *c,
324 u32 *pri40, u32 *pri80, u32 *pri160)
329 case NL80211_CHAN_WIDTH_40:
330 *pri40 = c->center_freq1;
334 case NL80211_CHAN_WIDTH_80:
335 case NL80211_CHAN_WIDTH_80P80:
337 *pri80 = c->center_freq1;
339 tmp = (30 + c->chan->center_freq - c->center_freq1)/20;
343 *pri40 = c->center_freq1 - 20 + 40 * tmp;
345 case NL80211_CHAN_WIDTH_160:
346 *pri160 = c->center_freq1;
348 tmp = (70 + c->chan->center_freq - c->center_freq1)/20;
352 *pri40 = c->center_freq1 - 60 + 40 * tmp;
355 *pri80 = c->center_freq1 - 40 + 80 * tmp;
357 case NL80211_CHAN_WIDTH_320:
359 tmp = (150 + c->chan->center_freq - c->center_freq1) / 20;
363 *pri40 = c->center_freq1 - 140 + 40 * tmp;
366 *pri80 = c->center_freq1 - 120 + 80 * tmp;
369 *pri160 = c->center_freq1 - 80 + 160 * tmp;
376 const struct cfg80211_chan_def *
377 cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1,
378 const struct cfg80211_chan_def *c2)
380 u32 c1_pri40, c1_pri80, c2_pri40, c2_pri80, c1_pri160, c2_pri160;
382 /* If they are identical, return */
383 if (cfg80211_chandef_identical(c1, c2))
386 /* otherwise, must have same control channel */
387 if (c1->chan != c2->chan)
391 * If they have the same width, but aren't identical,
392 * then they can't be compatible.
394 if (c1->width == c2->width)
398 * can't be compatible if one of them is 5 or 10 MHz,
399 * but they don't have the same width.
401 if (c1->width == NL80211_CHAN_WIDTH_5 ||
402 c1->width == NL80211_CHAN_WIDTH_10 ||
403 c2->width == NL80211_CHAN_WIDTH_5 ||
404 c2->width == NL80211_CHAN_WIDTH_10)
407 if (c1->width == NL80211_CHAN_WIDTH_20_NOHT ||
408 c1->width == NL80211_CHAN_WIDTH_20)
411 if (c2->width == NL80211_CHAN_WIDTH_20_NOHT ||
412 c2->width == NL80211_CHAN_WIDTH_20)
415 chandef_primary_freqs(c1, &c1_pri40, &c1_pri80, &c1_pri160);
416 chandef_primary_freqs(c2, &c2_pri40, &c2_pri80, &c2_pri160);
418 if (c1_pri40 != c2_pri40)
421 if (c1->width == NL80211_CHAN_WIDTH_40)
424 if (c2->width == NL80211_CHAN_WIDTH_40)
427 if (c1_pri80 != c2_pri80)
430 if (c1->width == NL80211_CHAN_WIDTH_80 &&
431 c2->width > NL80211_CHAN_WIDTH_80)
434 if (c2->width == NL80211_CHAN_WIDTH_80 &&
435 c1->width > NL80211_CHAN_WIDTH_80)
438 WARN_ON(!c1_pri160 && !c2_pri160);
439 if (c1_pri160 && c2_pri160 && c1_pri160 != c2_pri160)
442 if (c1->width > c2->width)
446 EXPORT_SYMBOL(cfg80211_chandef_compatible);
448 static void cfg80211_set_chans_dfs_state(struct wiphy *wiphy, u32 center_freq,
450 enum nl80211_dfs_state dfs_state)
452 struct ieee80211_channel *c;
455 for (freq = center_freq - bandwidth/2 + 10;
456 freq <= center_freq + bandwidth/2 - 10;
458 c = ieee80211_get_channel(wiphy, freq);
459 if (!c || !(c->flags & IEEE80211_CHAN_RADAR))
462 c->dfs_state = dfs_state;
463 c->dfs_state_entered = jiffies;
467 void cfg80211_set_dfs_state(struct wiphy *wiphy,
468 const struct cfg80211_chan_def *chandef,
469 enum nl80211_dfs_state dfs_state)
473 if (WARN_ON(!cfg80211_chandef_valid(chandef)))
476 width = cfg80211_chandef_get_width(chandef);
480 cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq1,
483 if (!chandef->center_freq2)
485 cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq2,
489 static u32 cfg80211_get_start_freq(u32 center_freq,
494 bandwidth = MHZ_TO_KHZ(bandwidth);
495 if (bandwidth <= MHZ_TO_KHZ(20))
496 start_freq = center_freq;
498 start_freq = center_freq - bandwidth / 2 + MHZ_TO_KHZ(10);
503 static u32 cfg80211_get_end_freq(u32 center_freq,
508 bandwidth = MHZ_TO_KHZ(bandwidth);
509 if (bandwidth <= MHZ_TO_KHZ(20))
510 end_freq = center_freq;
512 end_freq = center_freq + bandwidth / 2 - MHZ_TO_KHZ(10);
517 static int cfg80211_get_chans_dfs_required(struct wiphy *wiphy,
521 struct ieee80211_channel *c;
522 u32 freq, start_freq, end_freq;
524 start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
525 end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
527 for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
528 c = ieee80211_get_channel_khz(wiphy, freq);
532 if (c->flags & IEEE80211_CHAN_RADAR)
539 int cfg80211_chandef_dfs_required(struct wiphy *wiphy,
540 const struct cfg80211_chan_def *chandef,
541 enum nl80211_iftype iftype)
546 if (WARN_ON(!cfg80211_chandef_valid(chandef)))
550 case NL80211_IFTYPE_ADHOC:
551 case NL80211_IFTYPE_AP:
552 case NL80211_IFTYPE_P2P_GO:
553 case NL80211_IFTYPE_MESH_POINT:
554 width = cfg80211_chandef_get_width(chandef);
558 ret = cfg80211_get_chans_dfs_required(wiphy,
559 ieee80211_chandef_to_khz(chandef),
564 return BIT(chandef->width);
566 if (!chandef->center_freq2)
569 ret = cfg80211_get_chans_dfs_required(wiphy,
570 MHZ_TO_KHZ(chandef->center_freq2),
575 return BIT(chandef->width);
578 case NL80211_IFTYPE_STATION:
579 case NL80211_IFTYPE_OCB:
580 case NL80211_IFTYPE_P2P_CLIENT:
581 case NL80211_IFTYPE_MONITOR:
582 case NL80211_IFTYPE_AP_VLAN:
583 case NL80211_IFTYPE_P2P_DEVICE:
584 case NL80211_IFTYPE_NAN:
586 case NL80211_IFTYPE_WDS:
587 case NL80211_IFTYPE_UNSPECIFIED:
588 case NUM_NL80211_IFTYPES:
594 EXPORT_SYMBOL(cfg80211_chandef_dfs_required);
596 static int cfg80211_get_chans_dfs_usable(struct wiphy *wiphy,
600 struct ieee80211_channel *c;
601 u32 freq, start_freq, end_freq;
604 start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
605 end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
608 * Check entire range of channels for the bandwidth.
609 * Check all channels are DFS channels (DFS_USABLE or
610 * DFS_AVAILABLE). Return number of usable channels
611 * (require CAC). Allow DFS and non-DFS channel mix.
613 for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
614 c = ieee80211_get_channel_khz(wiphy, freq);
618 if (c->flags & IEEE80211_CHAN_DISABLED)
621 if (c->flags & IEEE80211_CHAN_RADAR) {
622 if (c->dfs_state == NL80211_DFS_UNAVAILABLE)
625 if (c->dfs_state == NL80211_DFS_USABLE)
633 bool cfg80211_chandef_dfs_usable(struct wiphy *wiphy,
634 const struct cfg80211_chan_def *chandef)
639 if (WARN_ON(!cfg80211_chandef_valid(chandef)))
642 width = cfg80211_chandef_get_width(chandef);
646 r1 = cfg80211_get_chans_dfs_usable(wiphy,
647 MHZ_TO_KHZ(chandef->center_freq1),
653 switch (chandef->width) {
654 case NL80211_CHAN_WIDTH_80P80:
655 WARN_ON(!chandef->center_freq2);
656 r2 = cfg80211_get_chans_dfs_usable(wiphy,
657 MHZ_TO_KHZ(chandef->center_freq2),
663 WARN_ON(chandef->center_freq2);
667 return (r1 + r2 > 0);
671 * Checks if center frequency of chan falls with in the bandwidth
674 bool cfg80211_is_sub_chan(struct cfg80211_chan_def *chandef,
675 struct ieee80211_channel *chan)
680 if (chandef->chan->center_freq == chan->center_freq)
683 width = cfg80211_chandef_get_width(chandef);
687 for (freq = chandef->center_freq1 - width / 2 + 10;
688 freq <= chandef->center_freq1 + width / 2 - 10; freq += 20) {
689 if (chan->center_freq == freq)
693 if (!chandef->center_freq2)
696 for (freq = chandef->center_freq2 - width / 2 + 10;
697 freq <= chandef->center_freq2 + width / 2 - 10; freq += 20) {
698 if (chan->center_freq == freq)
705 bool cfg80211_beaconing_iface_active(struct wireless_dev *wdev)
709 ASSERT_WDEV_LOCK(wdev);
711 if (!wdev->chandef.chan)
714 switch (wdev->iftype) {
715 case NL80211_IFTYPE_AP:
716 case NL80211_IFTYPE_P2P_GO:
717 active = wdev->beacon_interval != 0;
719 case NL80211_IFTYPE_ADHOC:
720 active = wdev->ssid_len != 0;
722 case NL80211_IFTYPE_MESH_POINT:
723 active = wdev->mesh_id_len != 0;
725 case NL80211_IFTYPE_STATION:
726 case NL80211_IFTYPE_OCB:
727 case NL80211_IFTYPE_P2P_CLIENT:
728 case NL80211_IFTYPE_MONITOR:
729 case NL80211_IFTYPE_AP_VLAN:
730 case NL80211_IFTYPE_P2P_DEVICE:
731 /* Can NAN type be considered as beaconing interface? */
732 case NL80211_IFTYPE_NAN:
734 case NL80211_IFTYPE_UNSPECIFIED:
735 case NL80211_IFTYPE_WDS:
736 case NUM_NL80211_IFTYPES:
743 static bool cfg80211_is_wiphy_oper_chan(struct wiphy *wiphy,
744 struct ieee80211_channel *chan)
746 struct wireless_dev *wdev;
748 list_for_each_entry(wdev, &wiphy->wdev_list, list) {
750 if (!cfg80211_beaconing_iface_active(wdev)) {
755 if (cfg80211_is_sub_chan(&wdev->chandef, chan)) {
766 cfg80211_offchan_chain_is_active(struct cfg80211_registered_device *rdev,
767 struct ieee80211_channel *channel)
769 if (!rdev->background_radar_wdev)
772 if (!cfg80211_chandef_valid(&rdev->background_radar_chandef))
775 return cfg80211_is_sub_chan(&rdev->background_radar_chandef, channel);
778 bool cfg80211_any_wiphy_oper_chan(struct wiphy *wiphy,
779 struct ieee80211_channel *chan)
781 struct cfg80211_registered_device *rdev;
785 if (!(chan->flags & IEEE80211_CHAN_RADAR))
788 list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
789 if (!reg_dfs_domain_same(wiphy, &rdev->wiphy))
792 if (cfg80211_is_wiphy_oper_chan(&rdev->wiphy, chan))
795 if (cfg80211_offchan_chain_is_active(rdev, chan))
802 static bool cfg80211_get_chans_dfs_available(struct wiphy *wiphy,
806 struct ieee80211_channel *c;
807 u32 freq, start_freq, end_freq;
810 dfs_offload = wiphy_ext_feature_isset(wiphy,
811 NL80211_EXT_FEATURE_DFS_OFFLOAD);
813 start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
814 end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
817 * Check entire range of channels for the bandwidth.
818 * If any channel in between is disabled or has not
819 * had gone through CAC return false
821 for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
822 c = ieee80211_get_channel_khz(wiphy, freq);
826 if (c->flags & IEEE80211_CHAN_DISABLED)
829 if ((c->flags & IEEE80211_CHAN_RADAR) &&
830 (c->dfs_state != NL80211_DFS_AVAILABLE) &&
831 !(c->dfs_state == NL80211_DFS_USABLE && dfs_offload))
838 static bool cfg80211_chandef_dfs_available(struct wiphy *wiphy,
839 const struct cfg80211_chan_def *chandef)
844 if (WARN_ON(!cfg80211_chandef_valid(chandef)))
847 width = cfg80211_chandef_get_width(chandef);
851 r = cfg80211_get_chans_dfs_available(wiphy,
852 MHZ_TO_KHZ(chandef->center_freq1),
855 /* If any of channels unavailable for cf1 just return */
859 switch (chandef->width) {
860 case NL80211_CHAN_WIDTH_80P80:
861 WARN_ON(!chandef->center_freq2);
862 r = cfg80211_get_chans_dfs_available(wiphy,
863 MHZ_TO_KHZ(chandef->center_freq2),
867 WARN_ON(chandef->center_freq2);
874 static unsigned int cfg80211_get_chans_dfs_cac_time(struct wiphy *wiphy,
878 struct ieee80211_channel *c;
879 u32 start_freq, end_freq, freq;
880 unsigned int dfs_cac_ms = 0;
882 start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
883 end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
885 for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
886 c = ieee80211_get_channel_khz(wiphy, freq);
890 if (c->flags & IEEE80211_CHAN_DISABLED)
893 if (!(c->flags & IEEE80211_CHAN_RADAR))
896 if (c->dfs_cac_ms > dfs_cac_ms)
897 dfs_cac_ms = c->dfs_cac_ms;
904 cfg80211_chandef_dfs_cac_time(struct wiphy *wiphy,
905 const struct cfg80211_chan_def *chandef)
908 unsigned int t1 = 0, t2 = 0;
910 if (WARN_ON(!cfg80211_chandef_valid(chandef)))
913 width = cfg80211_chandef_get_width(chandef);
917 t1 = cfg80211_get_chans_dfs_cac_time(wiphy,
918 MHZ_TO_KHZ(chandef->center_freq1),
921 if (!chandef->center_freq2)
924 t2 = cfg80211_get_chans_dfs_cac_time(wiphy,
925 MHZ_TO_KHZ(chandef->center_freq2),
931 static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy,
932 u32 center_freq, u32 bandwidth,
933 u32 prohibited_flags)
935 struct ieee80211_channel *c;
936 u32 freq, start_freq, end_freq;
938 start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
939 end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
941 for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
942 c = ieee80211_get_channel_khz(wiphy, freq);
943 if (!c || c->flags & prohibited_flags)
950 /* check if the operating channels are valid and supported */
951 static bool cfg80211_edmg_usable(struct wiphy *wiphy, u8 edmg_channels,
952 enum ieee80211_edmg_bw_config edmg_bw_config,
954 struct ieee80211_edmg *edmg_cap)
956 struct ieee80211_channel *chan;
958 int channels_counter = 0;
960 if (!edmg_channels && !edmg_bw_config)
963 if ((!edmg_channels && edmg_bw_config) ||
964 (edmg_channels && !edmg_bw_config))
967 if (!(edmg_channels & BIT(primary_channel - 1)))
970 /* 60GHz channels 1..6 */
971 for (i = 0; i < 6; i++) {
972 if (!(edmg_channels & BIT(i)))
975 if (!(edmg_cap->channels & BIT(i)))
980 freq = ieee80211_channel_to_frequency(i + 1,
982 chan = ieee80211_get_channel(wiphy, freq);
983 if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
987 /* IEEE802.11 allows max 4 channels */
988 if (channels_counter > 4)
991 /* check bw_config is a subset of what driver supports
992 * (see IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13)
994 if ((edmg_bw_config % 4) > (edmg_cap->bw_config % 4))
997 if (edmg_bw_config > edmg_cap->bw_config)
1003 bool cfg80211_chandef_usable(struct wiphy *wiphy,
1004 const struct cfg80211_chan_def *chandef,
1005 u32 prohibited_flags)
1007 struct ieee80211_sta_ht_cap *ht_cap;
1008 struct ieee80211_sta_vht_cap *vht_cap;
1009 struct ieee80211_edmg *edmg_cap;
1010 u32 width, control_freq, cap;
1011 bool ext_nss_cap, support_80_80 = false, support_320 = false;
1012 const struct ieee80211_sband_iftype_data *iftd;
1013 struct ieee80211_supported_band *sband;
1016 if (WARN_ON(!cfg80211_chandef_valid(chandef)))
1019 ht_cap = &wiphy->bands[chandef->chan->band]->ht_cap;
1020 vht_cap = &wiphy->bands[chandef->chan->band]->vht_cap;
1021 edmg_cap = &wiphy->bands[chandef->chan->band]->edmg_cap;
1022 ext_nss_cap = __le16_to_cpu(vht_cap->vht_mcs.tx_highest) &
1023 IEEE80211_VHT_EXT_NSS_BW_CAPABLE;
1025 if (edmg_cap->channels &&
1026 !cfg80211_edmg_usable(wiphy,
1027 chandef->edmg.channels,
1028 chandef->edmg.bw_config,
1029 chandef->chan->hw_value,
1033 control_freq = chandef->chan->center_freq;
1035 switch (chandef->width) {
1036 case NL80211_CHAN_WIDTH_1:
1039 case NL80211_CHAN_WIDTH_2:
1042 case NL80211_CHAN_WIDTH_4:
1045 case NL80211_CHAN_WIDTH_8:
1048 case NL80211_CHAN_WIDTH_16:
1051 case NL80211_CHAN_WIDTH_5:
1054 case NL80211_CHAN_WIDTH_10:
1055 prohibited_flags |= IEEE80211_CHAN_NO_10MHZ;
1058 case NL80211_CHAN_WIDTH_20:
1059 if (!ht_cap->ht_supported &&
1060 chandef->chan->band != NL80211_BAND_6GHZ)
1063 case NL80211_CHAN_WIDTH_20_NOHT:
1064 prohibited_flags |= IEEE80211_CHAN_NO_20MHZ;
1067 case NL80211_CHAN_WIDTH_40:
1069 if (chandef->chan->band == NL80211_BAND_6GHZ)
1071 if (!ht_cap->ht_supported)
1073 if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ||
1074 ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT)
1076 if (chandef->center_freq1 < control_freq &&
1077 chandef->chan->flags & IEEE80211_CHAN_NO_HT40MINUS)
1079 if (chandef->center_freq1 > control_freq &&
1080 chandef->chan->flags & IEEE80211_CHAN_NO_HT40PLUS)
1083 case NL80211_CHAN_WIDTH_80P80:
1086 (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) ||
1087 (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ &&
1088 cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) ||
1090 u32_get_bits(cap, IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) > 1);
1091 if (chandef->chan->band != NL80211_BAND_6GHZ && !support_80_80)
1094 case NL80211_CHAN_WIDTH_80:
1095 prohibited_flags |= IEEE80211_CHAN_NO_80MHZ;
1097 if (chandef->chan->band == NL80211_BAND_6GHZ)
1099 if (!vht_cap->vht_supported)
1102 case NL80211_CHAN_WIDTH_160:
1103 prohibited_flags |= IEEE80211_CHAN_NO_160MHZ;
1105 if (chandef->chan->band == NL80211_BAND_6GHZ)
1107 if (!vht_cap->vht_supported)
1109 cap = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
1110 if (cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ &&
1111 cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ &&
1113 (vht_cap->cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK)))
1116 case NL80211_CHAN_WIDTH_320:
1117 prohibited_flags |= IEEE80211_CHAN_NO_320MHZ;
1120 if (chandef->chan->band != NL80211_BAND_6GHZ)
1123 sband = wiphy->bands[NL80211_BAND_6GHZ];
1127 for (i = 0; i < sband->n_iftype_data; i++) {
1128 iftd = &sband->iftype_data[i];
1129 if (!iftd->eht_cap.has_eht)
1132 if (iftd->eht_cap.eht_cap_elem.phy_cap_info[0] &
1133 IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ) {
1148 * TODO: What if there are only certain 80/160/80+80 MHz channels
1149 * allowed by the driver, or only certain combinations?
1150 * For 40 MHz the driver can set the NO_HT40 flags, but for
1151 * 80/160 MHz and in particular 80+80 MHz this isn't really
1152 * feasible and we only have NO_80MHZ/NO_160MHZ so far but
1153 * no way to cover 80+80 MHz or more complex restrictions.
1154 * Note that such restrictions also need to be advertised to
1155 * userspace, for example for P2P channel selection.
1159 prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
1161 /* 5 and 10 MHz are only defined for the OFDM PHY */
1163 prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
1166 if (!cfg80211_secondary_chans_ok(wiphy,
1167 ieee80211_chandef_to_khz(chandef),
1168 width, prohibited_flags))
1171 if (!chandef->center_freq2)
1173 return cfg80211_secondary_chans_ok(wiphy,
1174 MHZ_TO_KHZ(chandef->center_freq2),
1175 width, prohibited_flags);
1177 EXPORT_SYMBOL(cfg80211_chandef_usable);
1180 * Check if the channel can be used under permissive conditions mandated by
1181 * some regulatory bodies, i.e., the channel is marked with
1182 * IEEE80211_CHAN_IR_CONCURRENT and there is an additional station interface
1183 * associated to an AP on the same channel or on the same UNII band
1184 * (assuming that the AP is an authorized master).
1185 * In addition allow operation on a channel on which indoor operation is
1186 * allowed, iff we are currently operating in an indoor environment.
1188 static bool cfg80211_ir_permissive_chan(struct wiphy *wiphy,
1189 enum nl80211_iftype iftype,
1190 struct ieee80211_channel *chan)
1192 struct wireless_dev *wdev;
1193 struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
1195 lockdep_assert_held(&rdev->wiphy.mtx);
1197 if (!IS_ENABLED(CONFIG_CFG80211_REG_RELAX_NO_IR) ||
1198 !(wiphy->regulatory_flags & REGULATORY_ENABLE_RELAX_NO_IR))
1201 /* only valid for GO and TDLS off-channel (station/p2p-CL) */
1202 if (iftype != NL80211_IFTYPE_P2P_GO &&
1203 iftype != NL80211_IFTYPE_STATION &&
1204 iftype != NL80211_IFTYPE_P2P_CLIENT)
1207 if (regulatory_indoor_allowed() &&
1208 (chan->flags & IEEE80211_CHAN_INDOOR_ONLY))
1211 if (!(chan->flags & IEEE80211_CHAN_IR_CONCURRENT))
1215 * Generally, it is possible to rely on another device/driver to allow
1216 * the IR concurrent relaxation, however, since the device can further
1217 * enforce the relaxation (by doing a similar verifications as this),
1218 * and thus fail the GO instantiation, consider only the interfaces of
1219 * the current registered device.
1221 list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
1222 struct ieee80211_channel *other_chan = NULL;
1226 if (wdev->iftype == NL80211_IFTYPE_STATION &&
1228 other_chan = wdev->current_bss->pub.channel;
1231 * If a GO already operates on the same GO_CONCURRENT channel,
1232 * this one (maybe the same one) can beacon as well. We allow
1233 * the operation even if the station we relied on with
1234 * GO_CONCURRENT is disconnected now. But then we must make sure
1235 * we're not outdoor on an indoor-only channel.
1237 if (iftype == NL80211_IFTYPE_P2P_GO &&
1238 wdev->iftype == NL80211_IFTYPE_P2P_GO &&
1239 wdev->beacon_interval &&
1240 !(chan->flags & IEEE80211_CHAN_INDOOR_ONLY))
1241 other_chan = wdev->chandef.chan;
1247 if (chan == other_chan)
1250 if (chan->band != NL80211_BAND_5GHZ &&
1251 chan->band != NL80211_BAND_6GHZ)
1254 r1 = cfg80211_get_unii(chan->center_freq);
1255 r2 = cfg80211_get_unii(other_chan->center_freq);
1257 if (r1 != -EINVAL && r1 == r2) {
1259 * At some locations channels 149-165 are considered a
1260 * bundle, but at other locations, e.g., Indonesia,
1261 * channels 149-161 are considered a bundle while
1262 * channel 165 is left out and considered to be in a
1263 * different bundle. Thus, in case that there is a
1264 * station interface connected to an AP on channel 165,
1265 * it is assumed that channels 149-161 are allowed for
1266 * GO operations. However, having a station interface
1267 * connected to an AP on channels 149-161, does not
1268 * allow GO operation on channel 165.
1270 if (chan->center_freq == 5825 &&
1271 other_chan->center_freq != 5825)
1280 static bool _cfg80211_reg_can_beacon(struct wiphy *wiphy,
1281 struct cfg80211_chan_def *chandef,
1282 enum nl80211_iftype iftype,
1286 u32 prohibited_flags = IEEE80211_CHAN_DISABLED |
1287 IEEE80211_CHAN_RADAR;
1289 trace_cfg80211_reg_can_beacon(wiphy, chandef, iftype, check_no_ir);
1292 prohibited_flags |= IEEE80211_CHAN_NO_IR;
1294 if (cfg80211_chandef_dfs_required(wiphy, chandef, iftype) > 0 &&
1295 cfg80211_chandef_dfs_available(wiphy, chandef)) {
1296 /* We can skip IEEE80211_CHAN_NO_IR if chandef dfs available */
1297 prohibited_flags = IEEE80211_CHAN_DISABLED;
1300 res = cfg80211_chandef_usable(wiphy, chandef, prohibited_flags);
1302 trace_cfg80211_return_bool(res);
1306 bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
1307 struct cfg80211_chan_def *chandef,
1308 enum nl80211_iftype iftype)
1310 return _cfg80211_reg_can_beacon(wiphy, chandef, iftype, true);
1312 EXPORT_SYMBOL(cfg80211_reg_can_beacon);
1314 bool cfg80211_reg_can_beacon_relax(struct wiphy *wiphy,
1315 struct cfg80211_chan_def *chandef,
1316 enum nl80211_iftype iftype)
1318 struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
1321 lockdep_assert_held(&rdev->wiphy.mtx);
1324 * Under certain conditions suggested by some regulatory bodies a
1325 * GO/STA can IR on channels marked with IEEE80211_NO_IR. Set this flag
1326 * only if such relaxations are not enabled and the conditions are not
1329 check_no_ir = !cfg80211_ir_permissive_chan(wiphy, iftype,
1332 return _cfg80211_reg_can_beacon(wiphy, chandef, iftype, check_no_ir);
1334 EXPORT_SYMBOL(cfg80211_reg_can_beacon_relax);
1336 int cfg80211_set_monitor_channel(struct cfg80211_registered_device *rdev,
1337 struct cfg80211_chan_def *chandef)
1339 if (!rdev->ops->set_monitor_channel)
1341 if (!cfg80211_has_monitors_only(rdev))
1344 return rdev_set_monitor_channel(rdev, chandef);
1348 cfg80211_get_chan_state(struct wireless_dev *wdev,
1349 struct ieee80211_channel **chan,
1350 enum cfg80211_chan_mode *chanmode,
1356 *chanmode = CHAN_MODE_UNDEFINED;
1358 ASSERT_WDEV_LOCK(wdev);
1360 if (wdev->netdev && !netif_running(wdev->netdev))
1363 switch (wdev->iftype) {
1364 case NL80211_IFTYPE_ADHOC:
1365 if (wdev->current_bss) {
1366 *chan = wdev->current_bss->pub.channel;
1367 *chanmode = (wdev->ibss_fixed &&
1368 !wdev->ibss_dfs_possible)
1370 : CHAN_MODE_EXCLUSIVE;
1372 /* consider worst-case - IBSS can try to return to the
1373 * original user-specified channel as creator */
1374 if (wdev->ibss_dfs_possible)
1375 *radar_detect |= BIT(wdev->chandef.width);
1379 case NL80211_IFTYPE_STATION:
1380 case NL80211_IFTYPE_P2P_CLIENT:
1381 if (wdev->current_bss) {
1382 *chan = wdev->current_bss->pub.channel;
1383 *chanmode = CHAN_MODE_SHARED;
1387 case NL80211_IFTYPE_AP:
1388 case NL80211_IFTYPE_P2P_GO:
1389 if (wdev->cac_started) {
1390 *chan = wdev->chandef.chan;
1391 *chanmode = CHAN_MODE_SHARED;
1392 *radar_detect |= BIT(wdev->chandef.width);
1393 } else if (wdev->beacon_interval) {
1394 *chan = wdev->chandef.chan;
1395 *chanmode = CHAN_MODE_SHARED;
1397 ret = cfg80211_chandef_dfs_required(wdev->wiphy,
1402 *radar_detect |= BIT(wdev->chandef.width);
1405 case NL80211_IFTYPE_MESH_POINT:
1406 if (wdev->mesh_id_len) {
1407 *chan = wdev->chandef.chan;
1408 *chanmode = CHAN_MODE_SHARED;
1410 ret = cfg80211_chandef_dfs_required(wdev->wiphy,
1415 *radar_detect |= BIT(wdev->chandef.width);
1418 case NL80211_IFTYPE_OCB:
1419 if (wdev->chandef.chan) {
1420 *chan = wdev->chandef.chan;
1421 *chanmode = CHAN_MODE_SHARED;
1425 case NL80211_IFTYPE_MONITOR:
1426 case NL80211_IFTYPE_AP_VLAN:
1427 case NL80211_IFTYPE_P2P_DEVICE:
1428 case NL80211_IFTYPE_NAN:
1429 /* these interface types don't really have a channel */
1431 case NL80211_IFTYPE_UNSPECIFIED:
1432 case NL80211_IFTYPE_WDS:
1433 case NUM_NL80211_IFTYPES:
1438 bool cfg80211_any_usable_channels(struct wiphy *wiphy,
1439 unsigned long sband_mask,
1440 u32 prohibited_flags)
1444 prohibited_flags |= IEEE80211_CHAN_DISABLED;
1446 for_each_set_bit(idx, &sband_mask, NUM_NL80211_BANDS) {
1447 struct ieee80211_supported_band *sband = wiphy->bands[idx];
1453 for (chanidx = 0; chanidx < sband->n_channels; chanidx++) {
1454 struct ieee80211_channel *chan;
1456 chan = &sband->channels[chanidx];
1458 if (chan->flags & prohibited_flags)
1467 EXPORT_SYMBOL(cfg80211_any_usable_channels);