2 * net/tipc/msg.c: TIPC message header routines
4 * Copyright (c) 2000-2006, 2014-2015, Ericsson AB
5 * Copyright (c) 2005, 2010-2011, Wind River Systems
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
41 #include "name_table.h"
44 #define BUF_ALIGN(x) ALIGN(x, 4)
45 #define MAX_FORWARD_SIZE 1024
46 #ifdef CONFIG_TIPC_CRYPTO
47 #define BUF_HEADROOM ALIGN(((LL_MAX_HEADER + 48) + EHDR_MAX_SIZE), 16)
48 #define BUF_OVERHEAD (BUF_HEADROOM + TIPC_AES_GCM_TAG_SIZE)
50 #define BUF_HEADROOM (LL_MAX_HEADER + 48)
51 #define BUF_OVERHEAD BUF_HEADROOM
54 const int one_page_mtu = PAGE_SIZE - SKB_DATA_ALIGN(BUF_OVERHEAD) -
55 SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
58 * tipc_buf_acquire - creates a TIPC message buffer
59 * @size: message size (including TIPC header)
60 * @gfp: memory allocation flags
62 * Return: a new buffer with data pointers set to the specified size.
65 * Headroom is reserved to allow prepending of a data link header.
66 * There may also be unrequested tailroom present at the buffer's end.
68 struct sk_buff *tipc_buf_acquire(u32 size, gfp_t gfp)
72 skb = alloc_skb_fclone(BUF_OVERHEAD + size, gfp);
74 skb_reserve(skb, BUF_HEADROOM);
81 void tipc_msg_init(u32 own_node, struct tipc_msg *m, u32 user, u32 type,
86 msg_set_user(m, user);
87 msg_set_hdr_sz(m, hsize);
88 msg_set_size(m, hsize);
89 msg_set_prevnode(m, own_node);
90 msg_set_type(m, type);
91 if (hsize > SHORT_H_SIZE) {
92 msg_set_orignode(m, own_node);
93 msg_set_destnode(m, dnode);
97 struct sk_buff *tipc_msg_create(uint user, uint type,
98 uint hdr_sz, uint data_sz, u32 dnode,
99 u32 onode, u32 dport, u32 oport, int errcode)
101 struct tipc_msg *msg;
104 buf = tipc_buf_acquire(hdr_sz + data_sz, GFP_ATOMIC);
109 tipc_msg_init(onode, msg, user, type, hdr_sz, dnode);
110 msg_set_size(msg, hdr_sz + data_sz);
111 msg_set_origport(msg, oport);
112 msg_set_destport(msg, dport);
113 msg_set_errcode(msg, errcode);
117 /* tipc_buf_append(): Append a buffer to the fragment list of another buffer
118 * @*headbuf: in: NULL for first frag, otherwise value returned from prev call
119 * out: set when successful non-complete reassembly, otherwise NULL
120 * @*buf: in: the buffer to append. Always defined
121 * out: head buf after successful complete reassembly, otherwise NULL
122 * Returns 1 when reassembly complete, otherwise 0
124 int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf)
126 struct sk_buff *head = *headbuf;
127 struct sk_buff *frag = *buf;
128 struct sk_buff *tail = NULL;
129 struct tipc_msg *msg;
138 fragid = msg_type(msg);
140 skb_pull(frag, msg_hdr_sz(msg));
142 if (fragid == FIRST_FRAGMENT) {
146 if (skb_has_frag_list(frag) && __skb_linearize(frag))
148 frag = skb_unshare(frag, GFP_ATOMIC);
151 head = *headbuf = frag;
152 TIPC_SKB_CB(head)->tail = NULL;
159 if (skb_try_coalesce(head, frag, &headstolen, &delta)) {
160 kfree_skb_partial(frag, headstolen);
162 tail = TIPC_SKB_CB(head)->tail;
163 if (!skb_has_frag_list(head))
164 skb_shinfo(head)->frag_list = frag;
167 head->truesize += frag->truesize;
168 head->data_len += frag->len;
169 head->len += frag->len;
170 TIPC_SKB_CB(head)->tail = frag;
173 if (fragid == LAST_FRAGMENT) {
174 TIPC_SKB_CB(head)->validated = 0;
175 if (unlikely(!tipc_msg_validate(&head)))
178 TIPC_SKB_CB(head)->tail = NULL;
187 *buf = *headbuf = NULL;
192 * tipc_msg_append(): Append data to tail of an existing buffer queue
193 * @_hdr: header to be used
194 * @m: the data to be appended
195 * @mss: max allowable size of buffer
196 * @dlen: size of data to be appended
197 * @txq: queue to append to
199 * Return: the number of 1k blocks appended or errno value
201 int tipc_msg_append(struct tipc_msg *_hdr, struct msghdr *m, int dlen,
202 int mss, struct sk_buff_head *txq)
205 int accounted, total, curr;
206 int mlen, cpy, rem = dlen;
207 struct tipc_msg *hdr;
209 skb = skb_peek_tail(txq);
210 accounted = skb ? msg_blocks(buf_msg(skb)) : 0;
214 if (!skb || skb->len >= mss) {
215 skb = tipc_buf_acquire(mss, GFP_KERNEL);
219 skb_trim(skb, MIN_H_SIZE);
221 skb_copy_to_linear_data(skb, _hdr, MIN_H_SIZE);
222 msg_set_hdr_sz(hdr, MIN_H_SIZE);
223 msg_set_size(hdr, MIN_H_SIZE);
224 __skb_queue_tail(txq, skb);
228 curr = msg_blocks(hdr);
229 mlen = msg_size(hdr);
230 cpy = min_t(size_t, rem, mss - mlen);
231 if (cpy != copy_from_iter(skb->data + mlen, cpy, &m->msg_iter))
233 msg_set_size(hdr, mlen + cpy);
236 total += msg_blocks(hdr) - curr;
238 return total - accounted;
241 /* tipc_msg_validate - validate basic format of received message
243 * This routine ensures a TIPC message has an acceptable header, and at least
244 * as much data as the header indicates it should. The routine also ensures
245 * that the entire message header is stored in the main fragment of the message
246 * buffer, to simplify future access to message header fields.
248 * Note: Having extra info present in the message header or data areas is OK.
249 * TIPC will ignore the excess, under the assumption that it is optional info
250 * introduced by a later release of the protocol.
252 bool tipc_msg_validate(struct sk_buff **_skb)
254 struct sk_buff *skb = *_skb;
255 struct tipc_msg *hdr;
258 /* Ensure that flow control ratio condition is satisfied */
259 if (unlikely(skb->truesize / buf_roundup_len(skb) >= 4)) {
260 skb = skb_copy_expand(skb, BUF_HEADROOM, 0, GFP_ATOMIC);
267 if (unlikely(TIPC_SKB_CB(skb)->validated))
270 if (unlikely(!pskb_may_pull(skb, MIN_H_SIZE)))
273 hsz = msg_hdr_sz(buf_msg(skb));
274 if (unlikely(hsz < MIN_H_SIZE) || (hsz > MAX_H_SIZE))
276 if (unlikely(!pskb_may_pull(skb, hsz)))
280 if (unlikely(msg_version(hdr) != TIPC_VERSION))
284 if (unlikely(msz < hsz))
286 if (unlikely((msz - hsz) > TIPC_MAX_USER_MSG_SIZE))
288 if (unlikely(skb->len < msz))
291 TIPC_SKB_CB(skb)->validated = 1;
296 * tipc_msg_fragment - build a fragment skb list for TIPC message
298 * @skb: TIPC message skb
299 * @hdr: internal msg header to be put on the top of the fragments
300 * @pktmax: max size of a fragment incl. the header
301 * @frags: returned fragment skb list
303 * Return: 0 if the fragmentation is successful, otherwise: -EINVAL
306 int tipc_msg_fragment(struct sk_buff *skb, const struct tipc_msg *hdr,
307 int pktmax, struct sk_buff_head *frags)
309 int pktno, nof_fragms, dsz, dmax, eat;
310 struct tipc_msg *_hdr;
311 struct sk_buff *_skb;
314 /* Non-linear buffer? */
315 if (skb_linearize(skb))
318 data = (u8 *)skb->data;
319 dsz = msg_size(buf_msg(skb));
320 dmax = pktmax - INT_H_SIZE;
321 if (dsz <= dmax || !dmax)
324 nof_fragms = dsz / dmax + 1;
325 for (pktno = 1; pktno <= nof_fragms; pktno++) {
326 if (pktno < nof_fragms)
330 /* Allocate a new fragment */
331 _skb = tipc_buf_acquire(INT_H_SIZE + eat, GFP_ATOMIC);
335 __skb_queue_tail(frags, _skb);
336 /* Copy header & data to the fragment */
337 skb_copy_to_linear_data(_skb, hdr, INT_H_SIZE);
338 skb_copy_to_linear_data_offset(_skb, INT_H_SIZE, data, eat);
340 /* Update the fragment's header */
341 _hdr = buf_msg(_skb);
342 msg_set_fragm_no(_hdr, pktno);
343 msg_set_nof_fragms(_hdr, nof_fragms);
344 msg_set_size(_hdr, INT_H_SIZE + eat);
349 __skb_queue_purge(frags);
350 __skb_queue_head_init(frags);
355 * tipc_msg_build - create buffer chain containing specified header and data
356 * @mhdr: Message header, to be prepended to data
358 * @offset: buffer offset for fragmented messages (FIXME)
359 * @dsz: Total length of user data
360 * @pktmax: Max packet size that can be used
361 * @list: Buffer or chain of buffers to be returned to caller
363 * Note that the recursive call we are making here is safe, since it can
364 * logically go only one further level down.
366 * Return: message data size or errno: -ENOMEM, -EFAULT
368 int tipc_msg_build(struct tipc_msg *mhdr, struct msghdr *m, int offset,
369 int dsz, int pktmax, struct sk_buff_head *list)
371 int mhsz = msg_hdr_sz(mhdr);
372 struct tipc_msg pkthdr;
373 int msz = mhsz + dsz;
382 msg_set_size(mhdr, msz);
384 /* No fragmentation needed? */
385 if (likely(msz <= pktmax)) {
386 skb = tipc_buf_acquire(msz, GFP_KERNEL);
388 /* Fall back to smaller MTU if node local message */
389 if (unlikely(!skb)) {
390 if (pktmax != MAX_MSG_SIZE)
392 rc = tipc_msg_build(mhdr, m, offset, dsz,
396 if (tipc_msg_assemble(list))
401 __skb_queue_tail(list, skb);
402 skb_copy_to_linear_data(skb, mhdr, mhsz);
403 pktpos = skb->data + mhsz;
404 if (copy_from_iter_full(pktpos, dsz, &m->msg_iter))
410 /* Prepare reusable fragment header */
411 tipc_msg_init(msg_prevnode(mhdr), &pkthdr, MSG_FRAGMENTER,
412 FIRST_FRAGMENT, INT_H_SIZE, msg_destnode(mhdr));
413 msg_set_size(&pkthdr, pktmax);
414 msg_set_fragm_no(&pkthdr, pktno);
415 msg_set_importance(&pkthdr, msg_importance(mhdr));
417 /* Prepare first fragment */
418 skb = tipc_buf_acquire(pktmax, GFP_KERNEL);
422 __skb_queue_tail(list, skb);
424 skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE);
425 pktpos += INT_H_SIZE;
426 pktrem -= INT_H_SIZE;
427 skb_copy_to_linear_data_offset(skb, INT_H_SIZE, mhdr, mhsz);
435 if (!copy_from_iter_full(pktpos, pktrem, &m->msg_iter)) {
444 /* Prepare new fragment: */
445 if (drem < (pktmax - INT_H_SIZE))
446 pktsz = drem + INT_H_SIZE;
449 skb = tipc_buf_acquire(pktsz, GFP_KERNEL);
455 __skb_queue_tail(list, skb);
456 msg_set_type(&pkthdr, FRAGMENT);
457 msg_set_size(&pkthdr, pktsz);
458 msg_set_fragm_no(&pkthdr, ++pktno);
459 skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE);
460 pktpos = skb->data + INT_H_SIZE;
461 pktrem = pktsz - INT_H_SIZE;
464 msg_set_type(buf_msg(skb), LAST_FRAGMENT);
467 __skb_queue_purge(list);
468 __skb_queue_head_init(list);
473 * tipc_msg_bundle - Append contents of a buffer to tail of an existing one
474 * @bskb: the bundle buffer to append to
475 * @msg: message to be appended
476 * @max: max allowable size for the bundle buffer
478 * Return: "true" if bundling has been performed, otherwise "false"
480 static bool tipc_msg_bundle(struct sk_buff *bskb, struct tipc_msg *msg,
483 struct tipc_msg *bmsg = buf_msg(bskb);
484 u32 msz, bsz, offset, pad;
487 bsz = msg_size(bmsg);
488 offset = BUF_ALIGN(bsz);
491 if (unlikely(skb_tailroom(bskb) < (pad + msz)))
493 if (unlikely(max < (offset + msz)))
496 skb_put(bskb, pad + msz);
497 skb_copy_to_linear_data_offset(bskb, offset, msg, msz);
498 msg_set_size(bmsg, offset + msz);
499 msg_set_msgcnt(bmsg, msg_msgcnt(bmsg) + 1);
504 * tipc_msg_try_bundle - Try to bundle a new message to the last one
505 * @tskb: the last/target message to which the new one will be appended
506 * @skb: the new message skb pointer
507 * @mss: max message size (header inclusive)
508 * @dnode: destination node for the message
509 * @new_bundle: if this call made a new bundle or not
511 * Return: "true" if the new message skb is potential for bundling this time or
512 * later, in the case a bundling has been done this time, the skb is consumed
513 * (the skb pointer = NULL).
514 * Otherwise, "false" if the skb cannot be bundled at all.
516 bool tipc_msg_try_bundle(struct sk_buff *tskb, struct sk_buff **skb, u32 mss,
517 u32 dnode, bool *new_bundle)
519 struct tipc_msg *msg, *inner, *outer;
522 /* First, check if the new buffer is suitable for bundling */
524 if (msg_user(msg) == MSG_FRAGMENTER)
526 if (msg_user(msg) == TUNNEL_PROTOCOL)
528 if (msg_user(msg) == BCAST_PROTOCOL)
530 if (mss <= INT_H_SIZE + msg_size(msg))
533 /* Ok, but the last/target buffer can be empty? */
537 /* Is it a bundle already? Try to bundle the new message to it */
538 if (msg_user(buf_msg(tskb)) == MSG_BUNDLER) {
543 /* Make a new bundle of the two messages if possible */
544 tsz = msg_size(buf_msg(tskb));
545 if (unlikely(mss < BUF_ALIGN(INT_H_SIZE + tsz) + msg_size(msg)))
547 if (unlikely(pskb_expand_head(tskb, INT_H_SIZE, mss - tsz - INT_H_SIZE,
550 inner = buf_msg(tskb);
551 skb_push(tskb, INT_H_SIZE);
552 outer = buf_msg(tskb);
553 tipc_msg_init(msg_prevnode(inner), outer, MSG_BUNDLER, 0, INT_H_SIZE,
555 msg_set_importance(outer, msg_importance(inner));
556 msg_set_size(outer, INT_H_SIZE + tsz);
557 msg_set_msgcnt(outer, 1);
561 if (likely(tipc_msg_bundle(tskb, msg, mss))) {
569 * tipc_msg_extract(): extract bundled inner packet from buffer
570 * @skb: buffer to be extracted from.
571 * @iskb: extracted inner buffer, to be returned
572 * @pos: position in outer message of msg to be extracted.
573 * Returns position of next msg.
574 * Consumes outer buffer when last packet extracted
575 * Return: true when there is an extracted buffer, otherwise false
577 bool tipc_msg_extract(struct sk_buff *skb, struct sk_buff **iskb, int *pos)
579 struct tipc_msg *hdr, *ihdr;
583 if (unlikely(skb_linearize(skb)))
587 if (unlikely(*pos > (msg_data_sz(hdr) - MIN_H_SIZE)))
590 ihdr = (struct tipc_msg *)(msg_data(hdr) + *pos);
591 imsz = msg_size(ihdr);
593 if ((*pos + imsz) > msg_data_sz(hdr))
596 *iskb = tipc_buf_acquire(imsz, GFP_ATOMIC);
600 skb_copy_to_linear_data(*iskb, ihdr, imsz);
601 if (unlikely(!tipc_msg_validate(iskb)))
604 *pos += BUF_ALIGN(imsz);
614 * tipc_msg_reverse(): swap source and destination addresses and add error code
615 * @own_node: originating node id for reversed message
616 * @skb: buffer containing message to be reversed; will be consumed
617 * @err: error code to be set in message, if any
618 * Replaces consumed buffer with new one when successful
619 * Return: true if success, otherwise false
621 bool tipc_msg_reverse(u32 own_node, struct sk_buff **skb, int err)
623 struct sk_buff *_skb = *skb;
624 struct tipc_msg *_hdr, *hdr;
627 if (skb_linearize(_skb))
629 _hdr = buf_msg(_skb);
630 dlen = min_t(uint, msg_data_sz(_hdr), MAX_FORWARD_SIZE);
631 hlen = msg_hdr_sz(_hdr);
633 if (msg_dest_droppable(_hdr))
635 if (msg_errcode(_hdr))
638 /* Never return SHORT header */
639 if (hlen == SHORT_H_SIZE)
642 /* Don't return data along with SYN+, - sender has a clone */
643 if (msg_is_syn(_hdr) && err == TIPC_ERR_OVERLOAD)
646 /* Allocate new buffer to return */
647 *skb = tipc_buf_acquire(hlen + dlen, GFP_ATOMIC);
650 memcpy((*skb)->data, _skb->data, msg_hdr_sz(_hdr));
651 memcpy((*skb)->data + hlen, msg_data(_hdr), dlen);
653 /* Build reverse header in new buffer */
655 msg_set_hdr_sz(hdr, hlen);
656 msg_set_errcode(hdr, err);
657 msg_set_non_seq(hdr, 0);
658 msg_set_origport(hdr, msg_destport(_hdr));
659 msg_set_destport(hdr, msg_origport(_hdr));
660 msg_set_destnode(hdr, msg_prevnode(_hdr));
661 msg_set_prevnode(hdr, own_node);
662 msg_set_orignode(hdr, own_node);
663 msg_set_size(hdr, hlen + dlen);
673 bool tipc_msg_skb_clone(struct sk_buff_head *msg, struct sk_buff_head *cpy)
675 struct sk_buff *skb, *_skb;
677 skb_queue_walk(msg, skb) {
678 _skb = skb_clone(skb, GFP_ATOMIC);
680 __skb_queue_purge(cpy);
681 pr_err_ratelimited("Failed to clone buffer chain\n");
684 __skb_queue_tail(cpy, _skb);
690 * tipc_msg_lookup_dest(): try to find new destination for named message
691 * @net: pointer to associated network namespace
692 * @skb: the buffer containing the message.
693 * @err: error code to be used by caller if lookup fails
694 * Does not consume buffer
695 * Return: true if a destination is found, false otherwise
697 bool tipc_msg_lookup_dest(struct net *net, struct sk_buff *skb, int *err)
699 struct tipc_msg *msg = buf_msg(skb);
700 u32 scope = msg_lookup_scope(msg);
701 u32 self = tipc_own_addr(net);
702 u32 inst = msg_nameinst(msg);
703 struct tipc_socket_addr sk;
704 struct tipc_uaddr ua;
706 if (!msg_isdata(msg))
710 if (msg_errcode(msg))
712 *err = TIPC_ERR_NO_NAME;
713 if (skb_linearize(skb))
716 if (msg_reroute_cnt(msg))
718 tipc_uaddr(&ua, TIPC_SERVICE_RANGE, scope,
719 msg_nametype(msg), inst, inst);
720 sk.node = tipc_scope2node(net, scope);
721 if (!tipc_nametbl_lookup_anycast(net, &ua, &sk))
723 msg_incr_reroute_cnt(msg);
725 msg_set_prevnode(msg, self);
726 msg_set_destnode(msg, sk.node);
727 msg_set_destport(msg, sk.ref);
733 /* tipc_msg_assemble() - assemble chain of fragments into one message
735 bool tipc_msg_assemble(struct sk_buff_head *list)
737 struct sk_buff *skb, *tmp = NULL;
739 if (skb_queue_len(list) == 1)
742 while ((skb = __skb_dequeue(list))) {
744 if (tipc_buf_append(&tmp, &skb)) {
745 __skb_queue_tail(list, skb);
751 __skb_queue_purge(list);
752 __skb_queue_head_init(list);
753 pr_warn("Failed do assemble buffer\n");
757 /* tipc_msg_reassemble() - clone a buffer chain of fragments and
758 * reassemble the clones into one message
760 bool tipc_msg_reassemble(struct sk_buff_head *list, struct sk_buff_head *rcvq)
762 struct sk_buff *skb, *_skb;
763 struct sk_buff *frag = NULL;
764 struct sk_buff *head = NULL;
767 /* Copy header if single buffer */
768 if (skb_queue_len(list) == 1) {
769 skb = skb_peek(list);
770 hdr_len = skb_headroom(skb) + msg_hdr_sz(buf_msg(skb));
771 _skb = __pskb_copy(skb, hdr_len, GFP_ATOMIC);
774 __skb_queue_tail(rcvq, _skb);
778 /* Clone all fragments and reassemble */
779 skb_queue_walk(list, skb) {
780 frag = skb_clone(skb, GFP_ATOMIC);
784 if (tipc_buf_append(&head, &frag))
789 __skb_queue_tail(rcvq, frag);
792 pr_warn("Failed do clone local mcast rcv buffer\n");
797 bool tipc_msg_pskb_copy(u32 dst, struct sk_buff_head *msg,
798 struct sk_buff_head *cpy)
800 struct sk_buff *skb, *_skb;
802 skb_queue_walk(msg, skb) {
803 _skb = pskb_copy(skb, GFP_ATOMIC);
805 __skb_queue_purge(cpy);
808 msg_set_destnode(buf_msg(_skb), dst);
809 __skb_queue_tail(cpy, _skb);
814 /* tipc_skb_queue_sorted(); sort pkt into list according to sequence number
815 * @list: list to be appended to
816 * @seqno: sequence number of buffer to add
817 * @skb: buffer to add
819 bool __tipc_skb_queue_sorted(struct sk_buff_head *list, u16 seqno,
822 struct sk_buff *_skb, *tmp;
824 if (skb_queue_empty(list) || less(seqno, buf_seqno(skb_peek(list)))) {
825 __skb_queue_head(list, skb);
829 if (more(seqno, buf_seqno(skb_peek_tail(list)))) {
830 __skb_queue_tail(list, skb);
834 skb_queue_walk_safe(list, _skb, tmp) {
835 if (more(seqno, buf_seqno(_skb)))
837 if (seqno == buf_seqno(_skb))
839 __skb_queue_before(list, _skb, skb);
846 void tipc_skb_reject(struct net *net, int err, struct sk_buff *skb,
847 struct sk_buff_head *xmitq)
849 if (tipc_msg_reverse(tipc_own_addr(net), &skb, err))
850 __skb_queue_tail(xmitq, skb);