2 * net/tipc/msg.c: TIPC message header routines
4 * Copyright (c) 2000-2006, 2014-2015, Ericsson AB
5 * Copyright (c) 2005, 2010-2011, Wind River Systems
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
41 #include "name_table.h"
44 #define MAX_FORWARD_SIZE 1024
45 #ifdef CONFIG_TIPC_CRYPTO
46 #define BUF_HEADROOM ALIGN(((LL_MAX_HEADER + 48) + EHDR_MAX_SIZE), 16)
47 #define BUF_TAILROOM (TIPC_AES_GCM_TAG_SIZE)
49 #define BUF_HEADROOM (LL_MAX_HEADER + 48)
50 #define BUF_TAILROOM 16
53 static unsigned int align(unsigned int i)
59 * tipc_buf_acquire - creates a TIPC message buffer
60 * @size: message size (including TIPC header)
62 * Returns a new buffer with data pointers set to the specified size.
64 * NOTE: Headroom is reserved to allow prepending of a data link header.
65 * There may also be unrequested tailroom present at the buffer's end.
67 struct sk_buff *tipc_buf_acquire(u32 size, gfp_t gfp)
70 #ifdef CONFIG_TIPC_CRYPTO
71 unsigned int buf_size = (BUF_HEADROOM + size + BUF_TAILROOM + 3) & ~3u;
73 unsigned int buf_size = (BUF_HEADROOM + size + 3) & ~3u;
76 skb = alloc_skb_fclone(buf_size, gfp);
78 skb_reserve(skb, BUF_HEADROOM);
85 void tipc_msg_init(u32 own_node, struct tipc_msg *m, u32 user, u32 type,
90 msg_set_user(m, user);
91 msg_set_hdr_sz(m, hsize);
92 msg_set_size(m, hsize);
93 msg_set_prevnode(m, own_node);
94 msg_set_type(m, type);
95 if (hsize > SHORT_H_SIZE) {
96 msg_set_orignode(m, own_node);
97 msg_set_destnode(m, dnode);
101 struct sk_buff *tipc_msg_create(uint user, uint type,
102 uint hdr_sz, uint data_sz, u32 dnode,
103 u32 onode, u32 dport, u32 oport, int errcode)
105 struct tipc_msg *msg;
108 buf = tipc_buf_acquire(hdr_sz + data_sz, GFP_ATOMIC);
113 tipc_msg_init(onode, msg, user, type, hdr_sz, dnode);
114 msg_set_size(msg, hdr_sz + data_sz);
115 msg_set_origport(msg, oport);
116 msg_set_destport(msg, dport);
117 msg_set_errcode(msg, errcode);
118 if (hdr_sz > SHORT_H_SIZE) {
119 msg_set_orignode(msg, onode);
120 msg_set_destnode(msg, dnode);
125 /* tipc_buf_append(): Append a buffer to the fragment list of another buffer
126 * @*headbuf: in: NULL for first frag, otherwise value returned from prev call
127 * out: set when successful non-complete reassembly, otherwise NULL
128 * @*buf: in: the buffer to append. Always defined
129 * out: head buf after successful complete reassembly, otherwise NULL
130 * Returns 1 when reassembly complete, otherwise 0
132 int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf)
134 struct sk_buff *head = *headbuf;
135 struct sk_buff *frag = *buf;
136 struct sk_buff *tail = NULL;
137 struct tipc_msg *msg;
146 fragid = msg_type(msg);
148 skb_pull(frag, msg_hdr_sz(msg));
150 if (fragid == FIRST_FRAGMENT) {
153 if (skb_cloned(frag))
154 frag = skb_copy(frag, GFP_ATOMIC);
157 head = *headbuf = frag;
159 TIPC_SKB_CB(head)->tail = NULL;
160 if (skb_is_nonlinear(head)) {
161 skb_walk_frags(head, tail) {
162 TIPC_SKB_CB(head)->tail = tail;
165 skb_frag_list_init(head);
173 if (skb_try_coalesce(head, frag, &headstolen, &delta)) {
174 kfree_skb_partial(frag, headstolen);
176 tail = TIPC_SKB_CB(head)->tail;
177 if (!skb_has_frag_list(head))
178 skb_shinfo(head)->frag_list = frag;
181 head->truesize += frag->truesize;
182 head->data_len += frag->len;
183 head->len += frag->len;
184 TIPC_SKB_CB(head)->tail = frag;
187 if (fragid == LAST_FRAGMENT) {
188 TIPC_SKB_CB(head)->validated = 0;
189 if (unlikely(!tipc_msg_validate(&head)))
192 TIPC_SKB_CB(head)->tail = NULL;
201 *buf = *headbuf = NULL;
206 * tipc_msg_append(): Append data to tail of an existing buffer queue
207 * @_hdr: header to be used
208 * @m: the data to be appended
209 * @mss: max allowable size of buffer
210 * @dlen: size of data to be appended
211 * @txq: queue to appand to
212 * Returns the number og 1k blocks appended or errno value
214 int tipc_msg_append(struct tipc_msg *_hdr, struct msghdr *m, int dlen,
215 int mss, struct sk_buff_head *txq)
218 int accounted, total, curr;
219 int mlen, cpy, rem = dlen;
220 struct tipc_msg *hdr;
222 skb = skb_peek_tail(txq);
223 accounted = skb ? msg_blocks(buf_msg(skb)) : 0;
227 if (!skb || skb->len >= mss) {
228 skb = tipc_buf_acquire(mss, GFP_KERNEL);
232 skb_trim(skb, MIN_H_SIZE);
234 skb_copy_to_linear_data(skb, _hdr, MIN_H_SIZE);
235 msg_set_hdr_sz(hdr, MIN_H_SIZE);
236 msg_set_size(hdr, MIN_H_SIZE);
237 __skb_queue_tail(txq, skb);
241 curr = msg_blocks(hdr);
242 mlen = msg_size(hdr);
243 cpy = min_t(size_t, rem, mss - mlen);
244 if (cpy != copy_from_iter(skb->data + mlen, cpy, &m->msg_iter))
246 msg_set_size(hdr, mlen + cpy);
249 total += msg_blocks(hdr) - curr;
251 return total - accounted;
254 /* tipc_msg_validate - validate basic format of received message
256 * This routine ensures a TIPC message has an acceptable header, and at least
257 * as much data as the header indicates it should. The routine also ensures
258 * that the entire message header is stored in the main fragment of the message
259 * buffer, to simplify future access to message header fields.
261 * Note: Having extra info present in the message header or data areas is OK.
262 * TIPC will ignore the excess, under the assumption that it is optional info
263 * introduced by a later release of the protocol.
265 bool tipc_msg_validate(struct sk_buff **_skb)
267 struct sk_buff *skb = *_skb;
268 struct tipc_msg *hdr;
271 /* Ensure that flow control ratio condition is satisfied */
272 if (unlikely(skb->truesize / buf_roundup_len(skb) >= 4)) {
273 skb = skb_copy_expand(skb, BUF_HEADROOM, 0, GFP_ATOMIC);
280 if (unlikely(TIPC_SKB_CB(skb)->validated))
283 if (unlikely(!pskb_may_pull(skb, MIN_H_SIZE)))
286 hsz = msg_hdr_sz(buf_msg(skb));
287 if (unlikely(hsz < MIN_H_SIZE) || (hsz > MAX_H_SIZE))
289 if (unlikely(!pskb_may_pull(skb, hsz)))
293 if (unlikely(msg_version(hdr) != TIPC_VERSION))
297 if (unlikely(msz < hsz))
299 if (unlikely((msz - hsz) > TIPC_MAX_USER_MSG_SIZE))
301 if (unlikely(skb->len < msz))
304 TIPC_SKB_CB(skb)->validated = 1;
309 * tipc_msg_fragment - build a fragment skb list for TIPC message
311 * @skb: TIPC message skb
312 * @hdr: internal msg header to be put on the top of the fragments
313 * @pktmax: max size of a fragment incl. the header
314 * @frags: returned fragment skb list
316 * Returns 0 if the fragmentation is successful, otherwise: -EINVAL
319 int tipc_msg_fragment(struct sk_buff *skb, const struct tipc_msg *hdr,
320 int pktmax, struct sk_buff_head *frags)
322 int pktno, nof_fragms, dsz, dmax, eat;
323 struct tipc_msg *_hdr;
324 struct sk_buff *_skb;
327 /* Non-linear buffer? */
328 if (skb_linearize(skb))
331 data = (u8 *)skb->data;
332 dsz = msg_size(buf_msg(skb));
333 dmax = pktmax - INT_H_SIZE;
334 if (dsz <= dmax || !dmax)
337 nof_fragms = dsz / dmax + 1;
338 for (pktno = 1; pktno <= nof_fragms; pktno++) {
339 if (pktno < nof_fragms)
343 /* Allocate a new fragment */
344 _skb = tipc_buf_acquire(INT_H_SIZE + eat, GFP_ATOMIC);
348 __skb_queue_tail(frags, _skb);
349 /* Copy header & data to the fragment */
350 skb_copy_to_linear_data(_skb, hdr, INT_H_SIZE);
351 skb_copy_to_linear_data_offset(_skb, INT_H_SIZE, data, eat);
353 /* Update the fragment's header */
354 _hdr = buf_msg(_skb);
355 msg_set_fragm_no(_hdr, pktno);
356 msg_set_nof_fragms(_hdr, nof_fragms);
357 msg_set_size(_hdr, INT_H_SIZE + eat);
362 __skb_queue_purge(frags);
363 __skb_queue_head_init(frags);
368 * tipc_msg_build - create buffer chain containing specified header and data
369 * @mhdr: Message header, to be prepended to data
371 * @dsz: Total length of user data
372 * @pktmax: Max packet size that can be used
373 * @list: Buffer or chain of buffers to be returned to caller
375 * Note that the recursive call we are making here is safe, since it can
376 * logically go only one further level down.
378 * Returns message data size or errno: -ENOMEM, -EFAULT
380 int tipc_msg_build(struct tipc_msg *mhdr, struct msghdr *m, int offset,
381 int dsz, int pktmax, struct sk_buff_head *list)
383 int mhsz = msg_hdr_sz(mhdr);
384 struct tipc_msg pkthdr;
385 int msz = mhsz + dsz;
394 msg_set_size(mhdr, msz);
396 /* No fragmentation needed? */
397 if (likely(msz <= pktmax)) {
398 skb = tipc_buf_acquire(msz, GFP_KERNEL);
400 /* Fall back to smaller MTU if node local message */
401 if (unlikely(!skb)) {
402 if (pktmax != MAX_MSG_SIZE)
404 rc = tipc_msg_build(mhdr, m, offset, dsz, FB_MTU, list);
407 if (tipc_msg_assemble(list))
412 __skb_queue_tail(list, skb);
413 skb_copy_to_linear_data(skb, mhdr, mhsz);
414 pktpos = skb->data + mhsz;
415 if (copy_from_iter_full(pktpos, dsz, &m->msg_iter))
421 /* Prepare reusable fragment header */
422 tipc_msg_init(msg_prevnode(mhdr), &pkthdr, MSG_FRAGMENTER,
423 FIRST_FRAGMENT, INT_H_SIZE, msg_destnode(mhdr));
424 msg_set_size(&pkthdr, pktmax);
425 msg_set_fragm_no(&pkthdr, pktno);
426 msg_set_importance(&pkthdr, msg_importance(mhdr));
428 /* Prepare first fragment */
429 skb = tipc_buf_acquire(pktmax, GFP_KERNEL);
433 __skb_queue_tail(list, skb);
435 skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE);
436 pktpos += INT_H_SIZE;
437 pktrem -= INT_H_SIZE;
438 skb_copy_to_linear_data_offset(skb, INT_H_SIZE, mhdr, mhsz);
446 if (!copy_from_iter_full(pktpos, pktrem, &m->msg_iter)) {
455 /* Prepare new fragment: */
456 if (drem < (pktmax - INT_H_SIZE))
457 pktsz = drem + INT_H_SIZE;
460 skb = tipc_buf_acquire(pktsz, GFP_KERNEL);
466 __skb_queue_tail(list, skb);
467 msg_set_type(&pkthdr, FRAGMENT);
468 msg_set_size(&pkthdr, pktsz);
469 msg_set_fragm_no(&pkthdr, ++pktno);
470 skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE);
471 pktpos = skb->data + INT_H_SIZE;
472 pktrem = pktsz - INT_H_SIZE;
475 msg_set_type(buf_msg(skb), LAST_FRAGMENT);
478 __skb_queue_purge(list);
479 __skb_queue_head_init(list);
484 * tipc_msg_bundle - Append contents of a buffer to tail of an existing one
485 * @bskb: the bundle buffer to append to
486 * @msg: message to be appended
487 * @max: max allowable size for the bundle buffer
489 * Returns "true" if bundling has been performed, otherwise "false"
491 static bool tipc_msg_bundle(struct sk_buff *bskb, struct tipc_msg *msg,
494 struct tipc_msg *bmsg = buf_msg(bskb);
495 u32 msz, bsz, offset, pad;
498 bsz = msg_size(bmsg);
502 if (unlikely(skb_tailroom(bskb) < (pad + msz)))
504 if (unlikely(max < (offset + msz)))
507 skb_put(bskb, pad + msz);
508 skb_copy_to_linear_data_offset(bskb, offset, msg, msz);
509 msg_set_size(bmsg, offset + msz);
510 msg_set_msgcnt(bmsg, msg_msgcnt(bmsg) + 1);
515 * tipc_msg_try_bundle - Try to bundle a new message to the last one
516 * @tskb: the last/target message to which the new one will be appended
517 * @skb: the new message skb pointer
518 * @mss: max message size (header inclusive)
519 * @dnode: destination node for the message
520 * @new_bundle: if this call made a new bundle or not
522 * Return: "true" if the new message skb is potential for bundling this time or
523 * later, in the case a bundling has been done this time, the skb is consumed
524 * (the skb pointer = NULL).
525 * Otherwise, "false" if the skb cannot be bundled at all.
527 bool tipc_msg_try_bundle(struct sk_buff *tskb, struct sk_buff **skb, u32 mss,
528 u32 dnode, bool *new_bundle)
530 struct tipc_msg *msg, *inner, *outer;
533 /* First, check if the new buffer is suitable for bundling */
535 if (msg_user(msg) == MSG_FRAGMENTER)
537 if (msg_user(msg) == TUNNEL_PROTOCOL)
539 if (msg_user(msg) == BCAST_PROTOCOL)
541 if (mss <= INT_H_SIZE + msg_size(msg))
544 /* Ok, but the last/target buffer can be empty? */
548 /* Is it a bundle already? Try to bundle the new message to it */
549 if (msg_user(buf_msg(tskb)) == MSG_BUNDLER) {
554 /* Make a new bundle of the two messages if possible */
555 tsz = msg_size(buf_msg(tskb));
556 if (unlikely(mss < align(INT_H_SIZE + tsz) + msg_size(msg)))
558 if (unlikely(pskb_expand_head(tskb, INT_H_SIZE, mss - tsz - INT_H_SIZE,
561 inner = buf_msg(tskb);
562 skb_push(tskb, INT_H_SIZE);
563 outer = buf_msg(tskb);
564 tipc_msg_init(msg_prevnode(inner), outer, MSG_BUNDLER, 0, INT_H_SIZE,
566 msg_set_importance(outer, msg_importance(inner));
567 msg_set_size(outer, INT_H_SIZE + tsz);
568 msg_set_msgcnt(outer, 1);
572 if (likely(tipc_msg_bundle(tskb, msg, mss))) {
580 * tipc_msg_extract(): extract bundled inner packet from buffer
581 * @skb: buffer to be extracted from.
582 * @iskb: extracted inner buffer, to be returned
583 * @pos: position in outer message of msg to be extracted.
584 * Returns position of next msg
585 * Consumes outer buffer when last packet extracted
586 * Returns true when there is an extracted buffer, otherwise false
588 bool tipc_msg_extract(struct sk_buff *skb, struct sk_buff **iskb, int *pos)
590 struct tipc_msg *hdr, *ihdr;
594 if (unlikely(skb_linearize(skb)))
598 if (unlikely(*pos > (msg_data_sz(hdr) - MIN_H_SIZE)))
601 ihdr = (struct tipc_msg *)(msg_data(hdr) + *pos);
602 imsz = msg_size(ihdr);
604 if ((*pos + imsz) > msg_data_sz(hdr))
607 *iskb = tipc_buf_acquire(imsz, GFP_ATOMIC);
611 skb_copy_to_linear_data(*iskb, ihdr, imsz);
612 if (unlikely(!tipc_msg_validate(iskb)))
625 * tipc_msg_reverse(): swap source and destination addresses and add error code
626 * @own_node: originating node id for reversed message
627 * @skb: buffer containing message to be reversed; will be consumed
628 * @err: error code to be set in message, if any
629 * Replaces consumed buffer with new one when successful
630 * Returns true if success, otherwise false
632 bool tipc_msg_reverse(u32 own_node, struct sk_buff **skb, int err)
634 struct sk_buff *_skb = *skb;
635 struct tipc_msg *_hdr, *hdr;
638 if (skb_linearize(_skb))
640 _hdr = buf_msg(_skb);
641 dlen = min_t(uint, msg_data_sz(_hdr), MAX_FORWARD_SIZE);
642 hlen = msg_hdr_sz(_hdr);
644 if (msg_dest_droppable(_hdr))
646 if (msg_errcode(_hdr))
649 /* Never return SHORT header */
650 if (hlen == SHORT_H_SIZE)
653 /* Don't return data along with SYN+, - sender has a clone */
654 if (msg_is_syn(_hdr) && err == TIPC_ERR_OVERLOAD)
657 /* Allocate new buffer to return */
658 *skb = tipc_buf_acquire(hlen + dlen, GFP_ATOMIC);
661 memcpy((*skb)->data, _skb->data, msg_hdr_sz(_hdr));
662 memcpy((*skb)->data + hlen, msg_data(_hdr), dlen);
664 /* Build reverse header in new buffer */
666 msg_set_hdr_sz(hdr, hlen);
667 msg_set_errcode(hdr, err);
668 msg_set_non_seq(hdr, 0);
669 msg_set_origport(hdr, msg_destport(_hdr));
670 msg_set_destport(hdr, msg_origport(_hdr));
671 msg_set_destnode(hdr, msg_prevnode(_hdr));
672 msg_set_prevnode(hdr, own_node);
673 msg_set_orignode(hdr, own_node);
674 msg_set_size(hdr, hlen + dlen);
684 bool tipc_msg_skb_clone(struct sk_buff_head *msg, struct sk_buff_head *cpy)
686 struct sk_buff *skb, *_skb;
688 skb_queue_walk(msg, skb) {
689 _skb = skb_clone(skb, GFP_ATOMIC);
691 __skb_queue_purge(cpy);
692 pr_err_ratelimited("Failed to clone buffer chain\n");
695 __skb_queue_tail(cpy, _skb);
701 * tipc_msg_lookup_dest(): try to find new destination for named message
702 * @skb: the buffer containing the message.
703 * @err: error code to be used by caller if lookup fails
704 * Does not consume buffer
705 * Returns true if a destination is found, false otherwise
707 bool tipc_msg_lookup_dest(struct net *net, struct sk_buff *skb, int *err)
709 struct tipc_msg *msg = buf_msg(skb);
711 u32 onode = tipc_own_addr(net);
713 if (!msg_isdata(msg))
717 if (msg_errcode(msg))
719 *err = TIPC_ERR_NO_NAME;
720 if (skb_linearize(skb))
723 if (msg_reroute_cnt(msg))
725 dnode = tipc_scope2node(net, msg_lookup_scope(msg));
726 dport = tipc_nametbl_translate(net, msg_nametype(msg),
727 msg_nameinst(msg), &dnode);
730 msg_incr_reroute_cnt(msg);
732 msg_set_prevnode(msg, onode);
733 msg_set_destnode(msg, dnode);
734 msg_set_destport(msg, dport);
740 /* tipc_msg_assemble() - assemble chain of fragments into one message
742 bool tipc_msg_assemble(struct sk_buff_head *list)
744 struct sk_buff *skb, *tmp = NULL;
746 if (skb_queue_len(list) == 1)
749 while ((skb = __skb_dequeue(list))) {
751 if (tipc_buf_append(&tmp, &skb)) {
752 __skb_queue_tail(list, skb);
758 __skb_queue_purge(list);
759 __skb_queue_head_init(list);
760 pr_warn("Failed do assemble buffer\n");
764 /* tipc_msg_reassemble() - clone a buffer chain of fragments and
765 * reassemble the clones into one message
767 bool tipc_msg_reassemble(struct sk_buff_head *list, struct sk_buff_head *rcvq)
769 struct sk_buff *skb, *_skb;
770 struct sk_buff *frag = NULL;
771 struct sk_buff *head = NULL;
774 /* Copy header if single buffer */
775 if (skb_queue_len(list) == 1) {
776 skb = skb_peek(list);
777 hdr_len = skb_headroom(skb) + msg_hdr_sz(buf_msg(skb));
778 _skb = __pskb_copy(skb, hdr_len, GFP_ATOMIC);
781 __skb_queue_tail(rcvq, _skb);
785 /* Clone all fragments and reassemble */
786 skb_queue_walk(list, skb) {
787 frag = skb_clone(skb, GFP_ATOMIC);
791 if (tipc_buf_append(&head, &frag))
796 __skb_queue_tail(rcvq, frag);
799 pr_warn("Failed do clone local mcast rcv buffer\n");
804 bool tipc_msg_pskb_copy(u32 dst, struct sk_buff_head *msg,
805 struct sk_buff_head *cpy)
807 struct sk_buff *skb, *_skb;
809 skb_queue_walk(msg, skb) {
810 _skb = pskb_copy(skb, GFP_ATOMIC);
812 __skb_queue_purge(cpy);
815 msg_set_destnode(buf_msg(_skb), dst);
816 __skb_queue_tail(cpy, _skb);
821 /* tipc_skb_queue_sorted(); sort pkt into list according to sequence number
822 * @list: list to be appended to
823 * @seqno: sequence number of buffer to add
824 * @skb: buffer to add
826 bool __tipc_skb_queue_sorted(struct sk_buff_head *list, u16 seqno,
829 struct sk_buff *_skb, *tmp;
831 if (skb_queue_empty(list) || less(seqno, buf_seqno(skb_peek(list)))) {
832 __skb_queue_head(list, skb);
836 if (more(seqno, buf_seqno(skb_peek_tail(list)))) {
837 __skb_queue_tail(list, skb);
841 skb_queue_walk_safe(list, _skb, tmp) {
842 if (more(seqno, buf_seqno(_skb)))
844 if (seqno == buf_seqno(_skb))
846 __skb_queue_before(list, _skb, skb);
853 void tipc_skb_reject(struct net *net, int err, struct sk_buff *skb,
854 struct sk_buff_head *xmitq)
856 if (tipc_msg_reverse(tipc_own_addr(net), &skb, err))
857 __skb_queue_tail(xmitq, skb);