1 // SPDX-License-Identifier: GPL-2.0-only
3 * BSS client mode implementation
4 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
5 * Copyright 2004, Instant802 Networks, Inc.
6 * Copyright 2005, Devicescape Software, Inc.
7 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
8 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9 * Copyright 2013-2014 Intel Mobile Communications GmbH
10 * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
11 * Copyright (C) 2018 - 2022 Intel Corporation
14 #include <linux/delay.h>
15 #include <linux/fips.h>
16 #include <linux/if_ether.h>
17 #include <linux/skbuff.h>
18 #include <linux/if_arp.h>
19 #include <linux/etherdevice.h>
20 #include <linux/moduleparam.h>
21 #include <linux/rtnetlink.h>
22 #include <linux/crc32.h>
23 #include <linux/slab.h>
24 #include <linux/export.h>
25 #include <net/mac80211.h>
26 #include <asm/unaligned.h>
28 #include "ieee80211_i.h"
29 #include "driver-ops.h"
32 #include "fils_aead.h"
34 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
35 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
36 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
37 #define IEEE80211_AUTH_TIMEOUT_SAE (HZ * 2)
38 #define IEEE80211_AUTH_MAX_TRIES 3
39 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
40 #define IEEE80211_AUTH_WAIT_SAE_RETRY (HZ * 2)
41 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
42 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
43 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
44 #define IEEE80211_ASSOC_MAX_TRIES 3
46 static int max_nullfunc_tries = 2;
47 module_param(max_nullfunc_tries, int, 0644);
48 MODULE_PARM_DESC(max_nullfunc_tries,
49 "Maximum nullfunc tx tries before disconnecting (reason 4).");
51 static int max_probe_tries = 5;
52 module_param(max_probe_tries, int, 0644);
53 MODULE_PARM_DESC(max_probe_tries,
54 "Maximum probe tries before disconnecting (reason 4).");
57 * Beacon loss timeout is calculated as N frames times the
58 * advertised beacon interval. This may need to be somewhat
59 * higher than what hardware might detect to account for
60 * delays in the host processing frames. But since we also
61 * probe on beacon miss before declaring the connection lost
62 * default to what we want.
64 static int beacon_loss_count = 7;
65 module_param(beacon_loss_count, int, 0644);
66 MODULE_PARM_DESC(beacon_loss_count,
67 "Number of beacon intervals before we decide beacon was lost.");
70 * Time the connection can be idle before we probe
71 * it to see if we can still talk to the AP.
73 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
75 * Time we wait for a probe response after sending
76 * a probe request because of beacon loss or for
77 * checking the connection still works.
79 static int probe_wait_ms = 500;
80 module_param(probe_wait_ms, int, 0644);
81 MODULE_PARM_DESC(probe_wait_ms,
82 "Maximum time(ms) to wait for probe response"
83 " before disconnecting (reason 4).");
86 * How many Beacon frames need to have been used in average signal strength
87 * before starting to indicate signal change events.
89 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
92 * We can have multiple work items (and connection probing)
93 * scheduling this timer, but we need to take care to only
94 * reschedule it when it should fire _earlier_ than it was
95 * asked for before, or if it's not pending right now. This
96 * function ensures that. Note that it then is required to
97 * run this function for all timeouts after the first one
98 * has happened -- the work that runs from this timer will
101 static void run_again(struct ieee80211_sub_if_data *sdata,
102 unsigned long timeout)
104 sdata_assert_lock(sdata);
106 if (!timer_pending(&sdata->u.mgd.timer) ||
107 time_before(timeout, sdata->u.mgd.timer.expires))
108 mod_timer(&sdata->u.mgd.timer, timeout);
111 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
113 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
116 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
119 mod_timer(&sdata->u.mgd.bcn_mon_timer,
120 round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
123 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
125 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
127 if (unlikely(!ifmgd->associated))
130 if (ifmgd->probe_send_count)
131 ifmgd->probe_send_count = 0;
133 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
136 mod_timer(&ifmgd->conn_mon_timer,
137 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
140 static int ecw2cw(int ecw)
142 return (1 << ecw) - 1;
145 static ieee80211_conn_flags_t
146 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
147 struct ieee80211_link_data *link,
148 ieee80211_conn_flags_t conn_flags,
149 struct ieee80211_supported_band *sband,
150 struct ieee80211_channel *channel,
152 const struct ieee80211_ht_operation *ht_oper,
153 const struct ieee80211_vht_operation *vht_oper,
154 const struct ieee80211_he_operation *he_oper,
155 const struct ieee80211_eht_operation *eht_oper,
156 const struct ieee80211_s1g_oper_ie *s1g_oper,
157 struct cfg80211_chan_def *chandef, bool tracking)
159 struct cfg80211_chan_def vht_chandef;
160 struct ieee80211_sta_ht_cap sta_ht_cap;
161 ieee80211_conn_flags_t ret;
164 memset(chandef, 0, sizeof(struct cfg80211_chan_def));
165 chandef->chan = channel;
166 chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
167 chandef->center_freq1 = channel->center_freq;
168 chandef->freq1_offset = channel->freq_offset;
170 if (channel->band == NL80211_BAND_6GHZ) {
171 if (!ieee80211_chandef_he_6ghz_oper(sdata, he_oper, eht_oper,
174 "bad 6 GHz operation, disabling HT/VHT/HE/EHT\n");
175 ret = IEEE80211_CONN_DISABLE_HT |
176 IEEE80211_CONN_DISABLE_VHT |
177 IEEE80211_CONN_DISABLE_HE |
178 IEEE80211_CONN_DISABLE_EHT;
182 vht_chandef = *chandef;
184 } else if (sband->band == NL80211_BAND_S1GHZ) {
185 if (!ieee80211_chandef_s1g_oper(s1g_oper, chandef)) {
187 "Missing S1G Operation Element? Trying operating == primary\n");
188 chandef->width = ieee80211_s1g_channel_width(channel);
191 ret = IEEE80211_CONN_DISABLE_HT | IEEE80211_CONN_DISABLE_40MHZ |
192 IEEE80211_CONN_DISABLE_VHT |
193 IEEE80211_CONN_DISABLE_80P80MHZ |
194 IEEE80211_CONN_DISABLE_160MHZ;
198 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
199 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
201 if (!ht_oper || !sta_ht_cap.ht_supported) {
202 mlme_dbg(sdata, "HT operation missing / HT not supported\n");
203 ret = IEEE80211_CONN_DISABLE_HT |
204 IEEE80211_CONN_DISABLE_VHT |
205 IEEE80211_CONN_DISABLE_HE |
206 IEEE80211_CONN_DISABLE_EHT;
210 chandef->width = NL80211_CHAN_WIDTH_20;
212 ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
214 /* check that channel matches the right operating channel */
215 if (!tracking && channel->center_freq != ht_cfreq) {
217 * It's possible that some APs are confused here;
218 * Netgear WNDR3700 sometimes reports 4 higher than
219 * the actual channel in association responses, but
220 * since we look at probe response/beacon data here
224 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
225 channel->center_freq, ht_cfreq,
226 ht_oper->primary_chan, channel->band);
227 ret = IEEE80211_CONN_DISABLE_HT |
228 IEEE80211_CONN_DISABLE_VHT |
229 IEEE80211_CONN_DISABLE_HE |
230 IEEE80211_CONN_DISABLE_EHT;
234 /* check 40 MHz support, if we have it */
235 if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
236 ieee80211_chandef_ht_oper(ht_oper, chandef);
238 mlme_dbg(sdata, "40 MHz not supported\n");
239 /* 40 MHz (and 80 MHz) must be supported for VHT */
240 ret = IEEE80211_CONN_DISABLE_VHT;
241 /* also mark 40 MHz disabled */
242 ret |= IEEE80211_CONN_DISABLE_40MHZ;
246 if (!vht_oper || !sband->vht_cap.vht_supported) {
247 mlme_dbg(sdata, "VHT operation missing / VHT not supported\n");
248 ret = IEEE80211_CONN_DISABLE_VHT;
252 vht_chandef = *chandef;
253 if (!(conn_flags & IEEE80211_CONN_DISABLE_HE) &&
255 (le32_to_cpu(he_oper->he_oper_params) &
256 IEEE80211_HE_OPERATION_VHT_OPER_INFO)) {
257 struct ieee80211_vht_operation he_oper_vht_cap;
260 * Set only first 3 bytes (other 2 aren't used in
261 * ieee80211_chandef_vht_oper() anyway)
263 memcpy(&he_oper_vht_cap, he_oper->optional, 3);
264 he_oper_vht_cap.basic_mcs_set = cpu_to_le16(0);
266 if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info,
267 &he_oper_vht_cap, ht_oper,
269 if (!(conn_flags & IEEE80211_CONN_DISABLE_HE))
271 "HE AP VHT information is invalid, disabling HE\n");
272 ret = IEEE80211_CONN_DISABLE_HE | IEEE80211_CONN_DISABLE_EHT;
275 } else if (!ieee80211_chandef_vht_oper(&sdata->local->hw,
279 if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT))
281 "AP VHT information is invalid, disabling VHT\n");
282 ret = IEEE80211_CONN_DISABLE_VHT;
286 if (!cfg80211_chandef_valid(&vht_chandef)) {
287 if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT))
289 "AP VHT information is invalid, disabling VHT\n");
290 ret = IEEE80211_CONN_DISABLE_VHT;
294 if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
299 if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
300 if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT))
302 "AP VHT information doesn't match HT, disabling VHT\n");
303 ret = IEEE80211_CONN_DISABLE_VHT;
307 *chandef = vht_chandef;
310 * handle the case that the EHT operation indicates that it holds EHT
311 * operation information (in case that the channel width differs from
312 * the channel width reported in HT/VHT/HE).
314 if (eht_oper && (eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT)) {
315 struct cfg80211_chan_def eht_chandef = *chandef;
317 ieee80211_chandef_eht_oper(eht_oper,
319 NL80211_CHAN_WIDTH_160,
320 false, &eht_chandef);
322 if (!cfg80211_chandef_valid(&eht_chandef)) {
323 if (!(conn_flags & IEEE80211_CONN_DISABLE_EHT))
325 "AP EHT information is invalid, disabling EHT\n");
326 ret = IEEE80211_CONN_DISABLE_EHT;
330 if (!cfg80211_chandef_compatible(chandef, &eht_chandef)) {
331 if (!(conn_flags & IEEE80211_CONN_DISABLE_EHT))
333 "AP EHT information is incompatible, disabling EHT\n");
334 ret = IEEE80211_CONN_DISABLE_EHT;
338 *chandef = eht_chandef;
345 * When tracking the current AP, don't do any further checks if the
346 * new chandef is identical to the one we're currently using for the
347 * connection. This keeps us from playing ping-pong with regulatory,
348 * without it the following can happen (for example):
349 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
350 * - AP advertises regdom US
351 * - CRDA loads regdom US with 80 MHz prohibited (old database)
352 * - the code below detects an unsupported channel, downgrades, and
353 * we disconnect from the AP in the caller
354 * - disconnect causes CRDA to reload world regdomain and the game
356 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
358 * It seems possible that there are still scenarios with CSA or real
359 * bandwidth changes where a this could happen, but those cases are
360 * less common and wouldn't completely prevent using the AP.
363 cfg80211_chandef_identical(chandef, &link->conf->chandef))
366 /* don't print the message below for VHT mismatch if VHT is disabled */
367 if (ret & IEEE80211_CONN_DISABLE_VHT)
368 vht_chandef = *chandef;
371 * Ignore the DISABLED flag when we're already connected and only
372 * tracking the APs beacon for bandwidth changes - otherwise we
373 * might get disconnected here if we connect to an AP, update our
374 * regulatory information based on the AP's country IE and the
375 * information we have is wrong/outdated and disables the channel
376 * that we're actually using for the connection to the AP.
378 while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
380 IEEE80211_CHAN_DISABLED)) {
381 if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
382 ret = IEEE80211_CONN_DISABLE_HT |
383 IEEE80211_CONN_DISABLE_VHT |
384 IEEE80211_CONN_DISABLE_HE |
385 IEEE80211_CONN_DISABLE_EHT;
389 ret |= ieee80211_chandef_downgrade(chandef);
392 if (!he_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef,
393 IEEE80211_CHAN_NO_HE))
394 ret |= IEEE80211_CONN_DISABLE_HE | IEEE80211_CONN_DISABLE_EHT;
396 if (!eht_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef,
397 IEEE80211_CHAN_NO_EHT))
398 ret |= IEEE80211_CONN_DISABLE_EHT;
400 if (chandef->width != vht_chandef.width && !tracking)
402 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
404 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
408 static int ieee80211_config_bw(struct ieee80211_link_data *link,
409 const struct ieee80211_ht_cap *ht_cap,
410 const struct ieee80211_vht_cap *vht_cap,
411 const struct ieee80211_ht_operation *ht_oper,
412 const struct ieee80211_vht_operation *vht_oper,
413 const struct ieee80211_he_operation *he_oper,
414 const struct ieee80211_eht_operation *eht_oper,
415 const struct ieee80211_s1g_oper_ie *s1g_oper,
416 const u8 *bssid, u32 *changed)
418 struct ieee80211_sub_if_data *sdata = link->sdata;
419 struct ieee80211_local *local = sdata->local;
420 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
421 struct ieee80211_channel *chan = link->conf->chandef.chan;
422 struct ieee80211_supported_band *sband =
423 local->hw.wiphy->bands[chan->band];
424 struct cfg80211_chan_def chandef;
426 ieee80211_conn_flags_t flags;
427 u32 vht_cap_info = 0;
430 /* if HT was/is disabled, don't track any bandwidth changes */
431 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT || !ht_oper)
434 /* don't check VHT if we associated as non-VHT station */
435 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)
438 /* don't check HE if we associated as non-HE station */
439 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE ||
440 !ieee80211_get_he_iftype_cap(sband,
441 ieee80211_vif_type_p2p(&sdata->vif))) {
446 /* don't check EHT if we associated as non-EHT station */
447 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT ||
448 !ieee80211_get_eht_iftype_cap(sband,
449 ieee80211_vif_type_p2p(&sdata->vif)))
453 * if bss configuration changed store the new one -
454 * this may be applicable even if channel is identical
456 ht_opmode = le16_to_cpu(ht_oper->operation_mode);
457 if (link->conf->ht_operation_mode != ht_opmode) {
458 *changed |= BSS_CHANGED_HT;
459 link->conf->ht_operation_mode = ht_opmode;
463 vht_cap_info = le32_to_cpu(vht_cap->vht_cap_info);
465 /* calculate new channel (type) based on HT/VHT/HE operation IEs */
466 flags = ieee80211_determine_chantype(sdata, link,
467 link->u.mgd.conn_flags,
468 sband, chan, vht_cap_info,
471 s1g_oper, &chandef, true);
474 * Downgrade the new channel if we associated with restricted
475 * capabilities. For example, if we associated as a 20 MHz STA
476 * to a 40 MHz AP (due to regulatory, capabilities or config
477 * reasons) then switching to a 40 MHz channel now won't do us
478 * any good -- we couldn't use it with the AP.
480 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_80P80MHZ &&
481 chandef.width == NL80211_CHAN_WIDTH_80P80)
482 flags |= ieee80211_chandef_downgrade(&chandef);
483 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_160MHZ &&
484 chandef.width == NL80211_CHAN_WIDTH_160)
485 flags |= ieee80211_chandef_downgrade(&chandef);
486 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_40MHZ &&
487 chandef.width > NL80211_CHAN_WIDTH_20)
488 flags |= ieee80211_chandef_downgrade(&chandef);
490 if (cfg80211_chandef_identical(&chandef, &link->conf->chandef))
494 "AP %pM changed bandwidth, new config is %d.%03d MHz, width %d (%d.%03d/%d MHz)\n",
495 link->u.mgd.bssid, chandef.chan->center_freq,
496 chandef.chan->freq_offset, chandef.width,
497 chandef.center_freq1, chandef.freq1_offset,
498 chandef.center_freq2);
500 if (flags != (link->u.mgd.conn_flags &
501 (IEEE80211_CONN_DISABLE_HT |
502 IEEE80211_CONN_DISABLE_VHT |
503 IEEE80211_CONN_DISABLE_HE |
504 IEEE80211_CONN_DISABLE_EHT |
505 IEEE80211_CONN_DISABLE_40MHZ |
506 IEEE80211_CONN_DISABLE_80P80MHZ |
507 IEEE80211_CONN_DISABLE_160MHZ |
508 IEEE80211_CONN_DISABLE_320MHZ)) ||
509 !cfg80211_chandef_valid(&chandef)) {
511 "AP %pM changed caps/bw in a way we can't support (0x%x/0x%x) - disconnect\n",
512 link->u.mgd.bssid, flags, ifmgd->flags);
516 ret = ieee80211_link_change_bandwidth(link, &chandef, changed);
520 "AP %pM changed bandwidth to incompatible one - disconnect\n",
528 /* frame sending functions */
530 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
531 struct sk_buff *skb, u8 ap_ht_param,
532 struct ieee80211_supported_band *sband,
533 struct ieee80211_channel *channel,
534 enum ieee80211_smps_mode smps,
535 ieee80211_conn_flags_t conn_flags)
538 u32 flags = channel->flags;
540 struct ieee80211_sta_ht_cap ht_cap;
542 BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
544 memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
545 ieee80211_apply_htcap_overrides(sdata, &ht_cap);
547 /* determine capability flags */
550 switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
551 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
552 if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
553 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
554 cap &= ~IEEE80211_HT_CAP_SGI_40;
557 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
558 if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
559 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
560 cap &= ~IEEE80211_HT_CAP_SGI_40;
566 * If 40 MHz was disabled associate as though we weren't
567 * capable of 40 MHz -- some broken APs will never fall
568 * back to trying to transmit in 20 MHz.
570 if (conn_flags & IEEE80211_CONN_DISABLE_40MHZ) {
571 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
572 cap &= ~IEEE80211_HT_CAP_SGI_40;
575 /* set SM PS mode properly */
576 cap &= ~IEEE80211_HT_CAP_SM_PS;
578 case IEEE80211_SMPS_AUTOMATIC:
579 case IEEE80211_SMPS_NUM_MODES:
582 case IEEE80211_SMPS_OFF:
583 cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
584 IEEE80211_HT_CAP_SM_PS_SHIFT;
586 case IEEE80211_SMPS_STATIC:
587 cap |= WLAN_HT_CAP_SM_PS_STATIC <<
588 IEEE80211_HT_CAP_SM_PS_SHIFT;
590 case IEEE80211_SMPS_DYNAMIC:
591 cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
592 IEEE80211_HT_CAP_SM_PS_SHIFT;
596 /* reserve and fill IE */
597 pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
598 ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
601 /* This function determines vht capability flags for the association
603 * Note - the function returns true to own the MU-MIMO capability
605 static bool ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
607 struct ieee80211_supported_band *sband,
608 struct ieee80211_vht_cap *ap_vht_cap,
609 ieee80211_conn_flags_t conn_flags)
611 struct ieee80211_local *local = sdata->local;
614 struct ieee80211_sta_vht_cap vht_cap;
615 u32 mask, ap_bf_sts, our_bf_sts;
616 bool mu_mimo_owner = false;
618 BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
620 memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
621 ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
623 /* determine capability flags */
626 if (conn_flags & IEEE80211_CONN_DISABLE_80P80MHZ) {
627 u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
629 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
630 if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
631 bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
632 cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
635 if (conn_flags & IEEE80211_CONN_DISABLE_160MHZ) {
636 cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
637 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
641 * Some APs apparently get confused if our capabilities are better
642 * than theirs, so restrict what we advertise in the assoc request.
644 if (!(ap_vht_cap->vht_cap_info &
645 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
646 cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
647 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
648 else if (!(ap_vht_cap->vht_cap_info &
649 cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
650 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
653 * If some other vif is using the MU-MIMO capability we cannot associate
654 * using MU-MIMO - this will lead to contradictions in the group-id
656 * Ownership is defined since association request, in order to avoid
657 * simultaneous associations with MU-MIMO.
659 if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) {
660 bool disable_mu_mimo = false;
661 struct ieee80211_sub_if_data *other;
663 list_for_each_entry_rcu(other, &local->interfaces, list) {
664 if (other->vif.bss_conf.mu_mimo_owner) {
665 disable_mu_mimo = true;
670 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
672 mu_mimo_owner = true;
675 mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
677 ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
678 our_bf_sts = cap & mask;
680 if (ap_bf_sts < our_bf_sts) {
685 /* reserve and fill IE */
686 pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
687 ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
689 return mu_mimo_owner;
692 /* This function determines HE capability flags for the association
695 static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata,
697 struct ieee80211_supported_band *sband,
698 enum ieee80211_smps_mode smps_mode,
699 ieee80211_conn_flags_t conn_flags)
701 u8 *pos, *pre_he_pos;
702 const struct ieee80211_sta_he_cap *he_cap;
705 he_cap = ieee80211_get_he_iftype_cap(sband,
706 ieee80211_vif_type_p2p(&sdata->vif));
707 if (WARN_ON(!he_cap))
710 /* get a max size estimate */
712 2 + 1 + sizeof(he_cap->he_cap_elem) +
713 ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) +
714 ieee80211_he_ppe_size(he_cap->ppe_thres[0],
715 he_cap->he_cap_elem.phy_cap_info);
716 pos = skb_put(skb, he_cap_size);
718 pos = ieee80211_ie_build_he_cap(conn_flags,
719 pos, he_cap, pos + he_cap_size);
720 /* trim excess if any */
721 skb_trim(skb, skb->len - (pre_he_pos + he_cap_size - pos));
723 ieee80211_ie_build_he_6ghz_cap(sdata, smps_mode, skb);
726 static void ieee80211_add_eht_ie(struct ieee80211_sub_if_data *sdata,
728 struct ieee80211_supported_band *sband)
731 const struct ieee80211_sta_he_cap *he_cap;
732 const struct ieee80211_sta_eht_cap *eht_cap;
735 he_cap = ieee80211_get_he_iftype_cap(sband,
736 ieee80211_vif_type_p2p(&sdata->vif));
737 eht_cap = ieee80211_get_eht_iftype_cap(sband,
738 ieee80211_vif_type_p2p(&sdata->vif));
741 * EHT capabilities element is only added if the HE capabilities element
742 * was added so assume that 'he_cap' is valid and don't check it.
744 if (WARN_ON(!he_cap || !eht_cap))
748 2 + 1 + sizeof(eht_cap->eht_cap_elem) +
749 ieee80211_eht_mcs_nss_size(&he_cap->he_cap_elem,
750 &eht_cap->eht_cap_elem,
752 ieee80211_eht_ppe_size(eht_cap->eht_ppe_thres[0],
753 eht_cap->eht_cap_elem.phy_cap_info);
754 pos = skb_put(skb, eht_cap_size);
755 ieee80211_ie_build_eht_cap(pos, he_cap, eht_cap, pos + eht_cap_size,
759 static void ieee80211_assoc_add_rates(struct sk_buff *skb,
760 enum nl80211_chan_width width,
761 struct ieee80211_supported_band *sband,
762 struct ieee80211_mgd_assoc_data *assoc_data)
764 unsigned int shift = ieee80211_chanwidth_get_shift(width);
765 unsigned int rates_len, supp_rates_len;
770 if (assoc_data->supp_rates_len) {
772 * Get all rates supported by the device and the AP as
773 * some APs don't like getting a superset of their rates
774 * in the association request (e.g. D-Link DAP 1353 in
777 rates_len = ieee80211_parse_bitrates(width, sband,
778 assoc_data->supp_rates,
779 assoc_data->supp_rates_len,
783 * In case AP not provide any supported rates information
784 * before association, we send information element(s) with
785 * all rates that we support.
787 rates_len = sband->n_bitrates;
788 for (i = 0; i < sband->n_bitrates; i++)
792 supp_rates_len = rates_len;
793 if (supp_rates_len > 8)
796 pos = skb_put(skb, supp_rates_len + 2);
797 *pos++ = WLAN_EID_SUPP_RATES;
798 *pos++ = supp_rates_len;
801 for (i = 0; i < sband->n_bitrates; i++) {
802 if (BIT(i) & rates) {
803 int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
811 if (rates_len > count) {
812 pos = skb_put(skb, rates_len - count + 2);
813 *pos++ = WLAN_EID_EXT_SUPP_RATES;
814 *pos++ = rates_len - count;
816 for (i++; i < sband->n_bitrates; i++) {
817 if (BIT(i) & rates) {
820 rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
828 static size_t ieee80211_add_before_ht_elems(struct sk_buff *skb,
835 static const u8 before_ht[] = {
838 WLAN_EID_EXT_SUPP_RATES,
839 WLAN_EID_PWR_CAPABILITY,
840 WLAN_EID_SUPPORTED_CHANNELS,
843 WLAN_EID_RRM_ENABLED_CAPABILITIES,
844 WLAN_EID_MOBILITY_DOMAIN,
845 WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */
846 WLAN_EID_RIC_DATA, /* reassoc only */
847 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
849 static const u8 after_ric[] = {
850 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
851 WLAN_EID_HT_CAPABILITY,
852 WLAN_EID_BSS_COEX_2040,
853 /* luckily this is almost always there */
854 WLAN_EID_EXT_CAPABILITY,
855 WLAN_EID_QOS_TRAFFIC_CAPA,
856 WLAN_EID_TIM_BCAST_REQ,
857 WLAN_EID_INTERWORKING,
858 /* 60 GHz (Multi-band, DMG, MMS) can't happen */
859 WLAN_EID_VHT_CAPABILITY,
860 WLAN_EID_OPMODE_NOTIF,
866 noffset = ieee80211_ie_split_ric(elems, elems_len,
868 ARRAY_SIZE(before_ht),
870 ARRAY_SIZE(after_ric),
872 skb_put_data(skb, elems + offset, noffset - offset);
877 static size_t ieee80211_add_before_vht_elems(struct sk_buff *skb,
882 static const u8 before_vht[] = {
884 * no need to list the ones split off before HT
887 WLAN_EID_BSS_COEX_2040,
888 WLAN_EID_EXT_CAPABILITY,
889 WLAN_EID_QOS_TRAFFIC_CAPA,
890 WLAN_EID_TIM_BCAST_REQ,
891 WLAN_EID_INTERWORKING,
892 /* 60 GHz (Multi-band, DMG, MMS) can't happen */
899 /* RIC already taken care of in ieee80211_add_before_ht_elems() */
900 noffset = ieee80211_ie_split(elems, elems_len,
901 before_vht, ARRAY_SIZE(before_vht),
903 skb_put_data(skb, elems + offset, noffset - offset);
908 static size_t ieee80211_add_before_he_elems(struct sk_buff *skb,
913 static const u8 before_he[] = {
915 * no need to list the ones split off before VHT
918 WLAN_EID_OPMODE_NOTIF,
919 WLAN_EID_EXTENSION, WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE,
921 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_SESSION,
922 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_PUBLIC_KEY,
923 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_KEY_CONFIRM,
924 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_HLP_CONTAINER,
925 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN,
926 /* TODO: add 11ah/11aj/11ak elements */
933 /* RIC already taken care of in ieee80211_add_before_ht_elems() */
934 noffset = ieee80211_ie_split(elems, elems_len,
935 before_he, ARRAY_SIZE(before_he),
937 skb_put_data(skb, elems + offset, noffset - offset);
942 #define PRESENT_ELEMS_MAX 8
943 #define PRESENT_ELEM_EXT_OFFS 0x100
945 static void ieee80211_assoc_add_ml_elem(struct ieee80211_sub_if_data *sdata,
946 struct sk_buff *skb, u16 capab,
947 const struct element *ext_capa,
948 const u16 *present_elems);
950 static size_t ieee80211_assoc_link_elems(struct ieee80211_sub_if_data *sdata,
951 struct sk_buff *skb, u16 *capab,
952 const struct element *ext_capa,
953 const u8 *extra_elems,
954 size_t extra_elems_len,
955 unsigned int link_id,
956 struct ieee80211_link_data *link,
959 enum nl80211_iftype iftype = ieee80211_vif_type_p2p(&sdata->vif);
960 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
961 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
962 struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
963 struct ieee80211_channel *chan = cbss->channel;
964 const struct ieee80211_sband_iftype_data *iftd;
965 struct ieee80211_local *local = sdata->local;
966 struct ieee80211_supported_band *sband;
967 enum nl80211_chan_width width = NL80211_CHAN_WIDTH_20;
968 struct ieee80211_chanctx_conf *chanctx_conf;
969 enum ieee80211_smps_mode smps_mode;
970 u16 orig_capab = *capab;
972 int present_elems_len = 0;
976 #define ADD_PRESENT_ELEM(id) do { \
977 /* need a last for termination - we use 0 == SSID */ \
978 if (!WARN_ON(present_elems_len >= PRESENT_ELEMS_MAX - 1)) \
979 present_elems[present_elems_len++] = (id); \
981 #define ADD_PRESENT_EXT_ELEM(id) ADD_PRESENT_ELEM(PRESENT_ELEM_EXT_OFFS | (id))
984 smps_mode = link->smps_mode;
985 else if (sdata->u.mgd.powersave)
986 smps_mode = IEEE80211_SMPS_DYNAMIC;
988 smps_mode = IEEE80211_SMPS_OFF;
992 * 5/10 MHz scenarios are only viable without MLO, in which
993 * case this pointer should be used ... All of this is a bit
994 * unclear though, not sure this even works at all.
997 chanctx_conf = rcu_dereference(link->conf->chanctx_conf);
999 width = chanctx_conf->def.width;
1003 sband = local->hw.wiphy->bands[chan->band];
1004 iftd = ieee80211_get_sband_iftype_data(sband, iftype);
1006 if (sband->band == NL80211_BAND_2GHZ) {
1007 *capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
1008 *capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
1011 if ((cbss->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
1012 ieee80211_hw_check(&local->hw, SPECTRUM_MGMT))
1013 *capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
1015 if (sband->band != NL80211_BAND_S1GHZ)
1016 ieee80211_assoc_add_rates(skb, width, sband, assoc_data);
1018 if (*capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
1019 *capab & WLAN_CAPABILITY_RADIO_MEASURE) {
1020 struct cfg80211_chan_def chandef = {
1025 pos = skb_put(skb, 4);
1026 *pos++ = WLAN_EID_PWR_CAPABILITY;
1028 *pos++ = 0; /* min tx power */
1030 *pos++ = ieee80211_chandef_max_power(&chandef);
1031 ADD_PRESENT_ELEM(WLAN_EID_PWR_CAPABILITY);
1035 * Per spec, we shouldn't include the list of channels if we advertise
1036 * support for extended channel switching, but we've always done that;
1037 * (for now?) apply this restriction only on the (new) 6 GHz band.
1039 if (*capab & WLAN_CAPABILITY_SPECTRUM_MGMT &&
1040 (sband->band != NL80211_BAND_6GHZ ||
1041 !ext_capa || ext_capa->datalen < 1 ||
1042 !(ext_capa->data[0] & WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING))) {
1043 /* TODO: get this in reg domain format */
1044 pos = skb_put(skb, 2 * sband->n_channels + 2);
1045 *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
1046 *pos++ = 2 * sband->n_channels;
1047 for (i = 0; i < sband->n_channels; i++) {
1048 int cf = sband->channels[i].center_freq;
1050 *pos++ = ieee80211_frequency_to_channel(cf);
1051 *pos++ = 1; /* one channel in the subband*/
1053 ADD_PRESENT_ELEM(WLAN_EID_SUPPORTED_CHANNELS);
1056 /* if present, add any custom IEs that go before HT */
1057 offset = ieee80211_add_before_ht_elems(skb, extra_elems,
1061 if (sband->band != NL80211_BAND_6GHZ &&
1062 !(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HT)) {
1063 ieee80211_add_ht_ie(sdata, skb,
1064 assoc_data->link[link_id].ap_ht_param,
1065 sband, chan, smps_mode,
1066 assoc_data->link[link_id].conn_flags);
1067 ADD_PRESENT_ELEM(WLAN_EID_HT_CAPABILITY);
1070 /* if present, add any custom IEs that go before VHT */
1071 offset = ieee80211_add_before_vht_elems(skb, extra_elems,
1075 if (sband->band != NL80211_BAND_6GHZ &&
1076 !(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_VHT)) {
1077 bool mu_mimo_owner =
1078 ieee80211_add_vht_ie(sdata, skb, sband,
1079 &assoc_data->link[link_id].ap_vht_cap,
1080 assoc_data->link[link_id].conn_flags);
1083 link->conf->mu_mimo_owner = mu_mimo_owner;
1084 ADD_PRESENT_ELEM(WLAN_EID_VHT_CAPABILITY);
1088 * If AP doesn't support HT, mark HE and EHT as disabled.
1089 * If on the 5GHz band, make sure it supports VHT.
1091 if (assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HT ||
1092 (sband->band == NL80211_BAND_5GHZ &&
1093 assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_VHT))
1094 assoc_data->link[link_id].conn_flags |=
1095 IEEE80211_CONN_DISABLE_HE |
1096 IEEE80211_CONN_DISABLE_EHT;
1098 /* if present, add any custom IEs that go before HE */
1099 offset = ieee80211_add_before_he_elems(skb, extra_elems,
1103 if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HE)) {
1104 ieee80211_add_he_ie(sdata, skb, sband, smps_mode,
1105 assoc_data->link[link_id].conn_flags);
1106 ADD_PRESENT_EXT_ELEM(WLAN_EID_EXT_HE_CAPABILITY);
1110 * careful - need to know about all the present elems before
1111 * calling ieee80211_assoc_add_ml_elem(), so add this one if
1112 * we're going to put it after the ML element
1114 if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_EHT))
1115 ADD_PRESENT_EXT_ELEM(WLAN_EID_EXT_EHT_CAPABILITY);
1117 if (link_id == assoc_data->assoc_link_id)
1118 ieee80211_assoc_add_ml_elem(sdata, skb, orig_capab, ext_capa,
1121 /* crash if somebody gets it wrong */
1122 present_elems = NULL;
1124 if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_EHT))
1125 ieee80211_add_eht_ie(sdata, skb, sband);
1127 if (sband->band == NL80211_BAND_S1GHZ) {
1128 ieee80211_add_aid_request_ie(sdata, skb);
1129 ieee80211_add_s1g_capab_ie(sdata, &sband->s1g_cap, skb);
1132 if (iftd && iftd->vendor_elems.data && iftd->vendor_elems.len)
1133 skb_put_data(skb, iftd->vendor_elems.data, iftd->vendor_elems.len);
1136 link->u.mgd.conn_flags = assoc_data->link[link_id].conn_flags;
1141 static void ieee80211_add_non_inheritance_elem(struct sk_buff *skb,
1145 unsigned int skb_len = skb->len;
1148 u8 *len, *list_len = NULL;
1150 skb_put_u8(skb, WLAN_EID_EXTENSION);
1151 len = skb_put(skb, 1);
1152 skb_put_u8(skb, WLAN_EID_EXT_NON_INHERITANCE);
1154 for (i = 0; i < PRESENT_ELEMS_MAX && outer[i]; i++) {
1155 u16 elem = outer[i];
1156 bool have_inner = false;
1157 bool at_extension = false;
1159 /* should at least be sorted in the sense of normal -> ext */
1160 WARN_ON(at_extension && elem < PRESENT_ELEM_EXT_OFFS);
1162 /* switch to extension list */
1163 if (!at_extension && elem >= PRESENT_ELEM_EXT_OFFS) {
1164 at_extension = true;
1170 for (j = 0; j < PRESENT_ELEMS_MAX && inner[j]; j++) {
1171 if (elem == inner[j]) {
1181 list_len = skb_put(skb, 1);
1185 skb_put_u8(skb, (u8)elem);
1189 skb_trim(skb, skb_len);
1191 *len = skb->len - skb_len - 2;
1194 static void ieee80211_assoc_add_ml_elem(struct ieee80211_sub_if_data *sdata,
1195 struct sk_buff *skb, u16 capab,
1196 const struct element *ext_capa,
1197 const u16 *outer_present_elems)
1199 struct ieee80211_local *local = sdata->local;
1200 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1201 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
1202 struct ieee80211_multi_link_elem *ml_elem;
1203 struct ieee80211_mle_basic_common_info *common;
1204 const struct wiphy_iftype_ext_capab *ift_ext_capa;
1205 __le16 eml_capa = 0, mld_capa_ops = 0;
1206 unsigned int link_id;
1210 if (!sdata->vif.valid_links)
1213 ift_ext_capa = cfg80211_get_iftype_ext_capa(local->hw.wiphy,
1214 ieee80211_vif_type_p2p(&sdata->vif));
1216 eml_capa = cpu_to_le16(ift_ext_capa->eml_capabilities);
1217 mld_capa_ops = cpu_to_le16(ift_ext_capa->mld_capa_and_ops);
1220 skb_put_u8(skb, WLAN_EID_EXTENSION);
1221 ml_elem_len = skb_put(skb, 1);
1222 skb_put_u8(skb, WLAN_EID_EXT_EHT_MULTI_LINK);
1223 ml_elem = skb_put(skb, sizeof(*ml_elem));
1225 cpu_to_le16(IEEE80211_ML_CONTROL_TYPE_BASIC |
1226 IEEE80211_MLC_BASIC_PRES_MLD_CAPA_OP);
1227 common = skb_put(skb, sizeof(*common));
1228 common->len = sizeof(*common) +
1229 2; /* MLD capa/ops */
1230 memcpy(common->mld_mac_addr, sdata->vif.addr, ETH_ALEN);
1232 /* add EML_CAPA only if needed, see Draft P802.11be_D2.1, 35.3.17 */
1234 cpu_to_le16((IEEE80211_EML_CAP_EMLSR_SUPP |
1235 IEEE80211_EML_CAP_EMLMR_SUPPORT))) {
1236 common->len += 2; /* EML capabilities */
1238 cpu_to_le16(IEEE80211_MLC_BASIC_PRES_EML_CAPA);
1239 skb_put_data(skb, &eml_capa, sizeof(eml_capa));
1241 /* need indication from userspace to support this */
1242 mld_capa_ops &= ~cpu_to_le16(IEEE80211_MLD_CAP_OP_TID_TO_LINK_MAP_NEG_SUPP);
1243 skb_put_data(skb, &mld_capa_ops, sizeof(mld_capa_ops));
1245 for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
1246 u16 link_present_elems[PRESENT_ELEMS_MAX] = {};
1247 const u8 *extra_elems;
1248 size_t extra_elems_len;
1250 u8 *subelem_len = NULL;
1253 if (!assoc_data->link[link_id].bss ||
1254 link_id == assoc_data->assoc_link_id)
1257 extra_elems = assoc_data->link[link_id].elems;
1258 extra_elems_len = assoc_data->link[link_id].elems_len;
1260 skb_put_u8(skb, IEEE80211_MLE_SUBELEM_PER_STA_PROFILE);
1261 subelem_len = skb_put(skb, 1);
1263 ctrl = cpu_to_le16(link_id |
1264 IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE |
1265 IEEE80211_MLE_STA_CONTROL_STA_MAC_ADDR_PRESENT);
1266 skb_put_data(skb, &ctrl, sizeof(ctrl));
1267 skb_put_u8(skb, 1 + ETH_ALEN); /* STA Info Length */
1268 skb_put_data(skb, assoc_data->link[link_id].addr,
1271 * Now add the contents of the (re)association request,
1272 * but the "listen interval" and "current AP address"
1273 * (if applicable) are skipped. So we only have
1274 * the capability field (remember the position and fill
1275 * later), followed by the elements added below by
1276 * calling ieee80211_assoc_link_elems().
1278 capab_pos = skb_put(skb, 2);
1280 extra_used = ieee80211_assoc_link_elems(sdata, skb, &capab,
1285 link_present_elems);
1287 skb_put_data(skb, extra_elems + extra_used,
1288 extra_elems_len - extra_used);
1290 put_unaligned_le16(capab, capab_pos);
1292 ieee80211_add_non_inheritance_elem(skb, outer_present_elems,
1293 link_present_elems);
1295 ieee80211_fragment_element(skb, subelem_len);
1298 ieee80211_fragment_element(skb, ml_elem_len);
1301 static int ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
1303 struct ieee80211_local *local = sdata->local;
1304 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1305 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
1306 struct ieee80211_link_data *link;
1307 struct sk_buff *skb;
1308 struct ieee80211_mgmt *mgmt;
1309 u8 *pos, qos_info, *ie_start;
1310 size_t offset, noffset;
1311 u16 capab = WLAN_CAPABILITY_ESS, link_capab;
1313 struct element *ext_capa = NULL;
1314 enum nl80211_iftype iftype = ieee80211_vif_type_p2p(&sdata->vif);
1315 struct ieee80211_prep_tx_info info = {};
1316 unsigned int link_id, n_links = 0;
1317 u16 present_elems[PRESENT_ELEMS_MAX] = {};
1322 /* we know it's writable, cast away the const */
1323 if (assoc_data->ie_len)
1324 ext_capa = (void *)cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY,
1326 assoc_data->ie_len);
1328 sdata_assert_lock(sdata);
1330 size = local->hw.extra_tx_headroom +
1331 sizeof(*mgmt) + /* bit too much but doesn't matter */
1332 2 + assoc_data->ssid_len + /* SSID */
1333 assoc_data->ie_len + /* extra IEs */
1334 (assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) +
1337 for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
1338 struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
1339 const struct ieee80211_sband_iftype_data *iftd;
1340 struct ieee80211_supported_band *sband;
1345 sband = local->hw.wiphy->bands[cbss->channel->band];
1348 /* add STA profile elements length */
1349 size += assoc_data->link[link_id].elems_len;
1350 /* and supported rates length */
1351 size += 4 + sband->n_bitrates;
1352 /* supported channels */
1353 size += 2 + 2 * sband->n_channels;
1355 iftd = ieee80211_get_sband_iftype_data(sband, iftype);
1357 size += iftd->vendor_elems.len;
1359 /* power capability */
1362 /* HT, VHT, HE, EHT */
1363 size += 2 + sizeof(struct ieee80211_ht_cap);
1364 size += 2 + sizeof(struct ieee80211_vht_cap);
1365 size += 2 + 1 + sizeof(struct ieee80211_he_cap_elem) +
1366 sizeof(struct ieee80211_he_mcs_nss_supp) +
1367 IEEE80211_HE_PPE_THRES_MAX_LEN;
1369 if (sband->band == NL80211_BAND_6GHZ)
1370 size += 2 + 1 + sizeof(struct ieee80211_he_6ghz_capa);
1372 size += 2 + 1 + sizeof(struct ieee80211_eht_cap_elem) +
1373 sizeof(struct ieee80211_eht_mcs_nss_supp) +
1374 IEEE80211_EHT_PPE_THRES_MAX_LEN;
1376 /* non-inheritance element */
1377 size += 2 + 2 + PRESENT_ELEMS_MAX;
1379 /* should be the same across all BSSes */
1380 if (cbss->capability & WLAN_CAPABILITY_PRIVACY)
1381 capab |= WLAN_CAPABILITY_PRIVACY;
1384 if (sdata->vif.valid_links) {
1385 /* consider the multi-link element with STA profile */
1386 size += sizeof(struct ieee80211_multi_link_elem);
1387 /* max common info field in basic multi-link element */
1388 size += sizeof(struct ieee80211_mle_basic_common_info) +
1393 * The capability elements were already considered above;
1394 * note this over-estimates a bit because there's no
1395 * STA profile for the assoc link.
1397 size += (n_links - 1) *
1398 (1 + 1 + /* subelement ID/length */
1399 2 + /* STA control */
1400 1 + ETH_ALEN + 2 /* STA Info field */);
1403 link = sdata_dereference(sdata->link[assoc_data->assoc_link_id], sdata);
1407 if (WARN_ON(!assoc_data->link[assoc_data->assoc_link_id].bss))
1410 skb = alloc_skb(size, GFP_KERNEL);
1414 skb_reserve(skb, local->hw.extra_tx_headroom);
1416 if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
1417 capab |= WLAN_CAPABILITY_RADIO_MEASURE;
1419 /* Set MBSSID support for HE AP if needed */
1420 if (ieee80211_hw_check(&local->hw, SUPPORTS_ONLY_HE_MULTI_BSSID) &&
1421 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
1422 ext_capa && ext_capa->datalen >= 3)
1423 ext_capa->data[2] |= WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT;
1425 mgmt = skb_put_zero(skb, 24);
1426 memcpy(mgmt->da, sdata->vif.cfg.ap_addr, ETH_ALEN);
1427 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
1428 memcpy(mgmt->bssid, sdata->vif.cfg.ap_addr, ETH_ALEN);
1430 listen_int = cpu_to_le16(assoc_data->s1g ?
1431 ieee80211_encode_usf(local->hw.conf.listen_interval) :
1432 local->hw.conf.listen_interval);
1433 if (!is_zero_ether_addr(assoc_data->prev_ap_addr)) {
1435 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1436 IEEE80211_STYPE_REASSOC_REQ);
1437 capab_pos = &mgmt->u.reassoc_req.capab_info;
1438 mgmt->u.reassoc_req.listen_interval = listen_int;
1439 memcpy(mgmt->u.reassoc_req.current_ap,
1440 assoc_data->prev_ap_addr, ETH_ALEN);
1441 info.subtype = IEEE80211_STYPE_REASSOC_REQ;
1444 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1445 IEEE80211_STYPE_ASSOC_REQ);
1446 capab_pos = &mgmt->u.assoc_req.capab_info;
1447 mgmt->u.assoc_req.listen_interval = listen_int;
1448 info.subtype = IEEE80211_STYPE_ASSOC_REQ;
1452 pos = skb_put(skb, 2 + assoc_data->ssid_len);
1454 *pos++ = WLAN_EID_SSID;
1455 *pos++ = assoc_data->ssid_len;
1456 memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
1458 /* add the elements for the assoc (main) link */
1460 offset = ieee80211_assoc_link_elems(sdata, skb, &link_capab,
1464 assoc_data->assoc_link_id, link,
1466 put_unaligned_le16(link_capab, capab_pos);
1468 /* if present, add any custom non-vendor IEs */
1469 if (assoc_data->ie_len) {
1470 noffset = ieee80211_ie_split_vendor(assoc_data->ie,
1473 skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
1477 if (assoc_data->wmm) {
1478 if (assoc_data->uapsd) {
1479 qos_info = ifmgd->uapsd_queues;
1480 qos_info |= (ifmgd->uapsd_max_sp_len <<
1481 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
1486 pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
1489 /* add any remaining custom (i.e. vendor specific here) IEs */
1490 if (assoc_data->ie_len) {
1491 noffset = assoc_data->ie_len;
1492 skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
1495 if (assoc_data->fils_kek_len) {
1496 ret = fils_encrypt_assoc_req(skb, assoc_data);
1503 pos = skb_tail_pointer(skb);
1504 kfree(ifmgd->assoc_req_ies);
1505 ifmgd->assoc_req_ies = kmemdup(ie_start, pos - ie_start, GFP_ATOMIC);
1506 if (!ifmgd->assoc_req_ies) {
1511 ifmgd->assoc_req_ies_len = pos - ie_start;
1513 drv_mgd_prepare_tx(local, sdata, &info);
1515 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1516 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1517 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
1518 IEEE80211_TX_INTFL_MLME_CONN_TX;
1519 ieee80211_tx_skb(sdata, skb);
1524 void ieee80211_send_pspoll(struct ieee80211_local *local,
1525 struct ieee80211_sub_if_data *sdata)
1527 struct ieee80211_pspoll *pspoll;
1528 struct sk_buff *skb;
1530 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
1534 pspoll = (struct ieee80211_pspoll *) skb->data;
1535 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1537 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1538 ieee80211_tx_skb(sdata, skb);
1541 void ieee80211_send_nullfunc(struct ieee80211_local *local,
1542 struct ieee80211_sub_if_data *sdata,
1545 struct sk_buff *skb;
1546 struct ieee80211_hdr_3addr *nullfunc;
1547 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1549 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif,
1550 !ieee80211_hw_check(&local->hw, DOESNT_SUPPORT_QOS_NDP));
1554 nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
1556 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1558 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
1559 IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
1561 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1562 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
1564 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
1565 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
1567 ieee80211_tx_skb(sdata, skb);
1570 void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
1571 struct ieee80211_sub_if_data *sdata)
1573 struct sk_buff *skb;
1574 struct ieee80211_hdr *nullfunc;
1577 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
1580 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
1584 skb_reserve(skb, local->hw.extra_tx_headroom);
1586 nullfunc = skb_put_zero(skb, 30);
1587 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
1588 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
1589 nullfunc->frame_control = fc;
1590 memcpy(nullfunc->addr1, sdata->deflink.u.mgd.bssid, ETH_ALEN);
1591 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
1592 memcpy(nullfunc->addr3, sdata->deflink.u.mgd.bssid, ETH_ALEN);
1593 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
1595 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1596 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
1597 ieee80211_tx_skb(sdata, skb);
1600 /* spectrum management related things */
1601 static void ieee80211_chswitch_work(struct work_struct *work)
1603 struct ieee80211_link_data *link =
1604 container_of(work, struct ieee80211_link_data, u.mgd.chswitch_work);
1605 struct ieee80211_sub_if_data *sdata = link->sdata;
1606 struct ieee80211_local *local = sdata->local;
1607 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1610 if (!ieee80211_sdata_running(sdata))
1614 mutex_lock(&local->mtx);
1615 mutex_lock(&local->chanctx_mtx);
1617 if (!ifmgd->associated)
1620 if (!link->conf->csa_active)
1624 * using reservation isn't immediate as it may be deferred until later
1625 * with multi-vif. once reservation is complete it will re-schedule the
1626 * work with no reserved_chanctx so verify chandef to check if it
1627 * completed successfully
1630 if (link->reserved_chanctx) {
1632 * with multi-vif csa driver may call ieee80211_csa_finish()
1633 * many times while waiting for other interfaces to use their
1636 if (link->reserved_ready)
1639 ret = ieee80211_link_use_reserved_context(link);
1642 "failed to use reserved channel context, disconnecting (err=%d)\n",
1644 ieee80211_queue_work(&sdata->local->hw,
1645 &ifmgd->csa_connection_drop_work);
1652 if (!cfg80211_chandef_identical(&link->conf->chandef,
1653 &link->csa_chandef)) {
1655 "failed to finalize channel switch, disconnecting\n");
1656 ieee80211_queue_work(&sdata->local->hw,
1657 &ifmgd->csa_connection_drop_work);
1661 link->u.mgd.csa_waiting_bcn = true;
1663 ieee80211_sta_reset_beacon_monitor(sdata);
1664 ieee80211_sta_reset_conn_monitor(sdata);
1667 mutex_unlock(&local->chanctx_mtx);
1668 mutex_unlock(&local->mtx);
1669 sdata_unlock(sdata);
1672 static void ieee80211_chswitch_post_beacon(struct ieee80211_link_data *link)
1674 struct ieee80211_sub_if_data *sdata = link->sdata;
1675 struct ieee80211_local *local = sdata->local;
1676 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1679 sdata_assert_lock(sdata);
1681 WARN_ON(!link->conf->csa_active);
1683 if (link->csa_block_tx) {
1684 ieee80211_wake_vif_queues(local, sdata,
1685 IEEE80211_QUEUE_STOP_REASON_CSA);
1686 link->csa_block_tx = false;
1689 link->conf->csa_active = false;
1690 link->u.mgd.csa_waiting_bcn = false;
1692 * If the CSA IE is still present on the beacon after the switch,
1693 * we need to consider it as a new CSA (possibly to self).
1695 link->u.mgd.beacon_crc_valid = false;
1697 ret = drv_post_channel_switch(sdata);
1700 "driver post channel switch failed, disconnecting\n");
1701 ieee80211_queue_work(&local->hw,
1702 &ifmgd->csa_connection_drop_work);
1706 cfg80211_ch_switch_notify(sdata->dev, &link->reserved_chandef, 0);
1709 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
1711 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1712 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1714 if (WARN_ON(sdata->vif.valid_links))
1717 trace_api_chswitch_done(sdata, success);
1720 "driver channel switch failed, disconnecting\n");
1721 ieee80211_queue_work(&sdata->local->hw,
1722 &ifmgd->csa_connection_drop_work);
1724 ieee80211_queue_work(&sdata->local->hw,
1725 &sdata->deflink.u.mgd.chswitch_work);
1728 EXPORT_SYMBOL(ieee80211_chswitch_done);
1730 static void ieee80211_chswitch_timer(struct timer_list *t)
1732 struct ieee80211_link_data *link =
1733 from_timer(link, t, u.mgd.chswitch_timer);
1735 ieee80211_queue_work(&link->sdata->local->hw,
1736 &link->u.mgd.chswitch_work);
1740 ieee80211_sta_abort_chanswitch(struct ieee80211_link_data *link)
1742 struct ieee80211_sub_if_data *sdata = link->sdata;
1743 struct ieee80211_local *local = sdata->local;
1745 if (!local->ops->abort_channel_switch)
1748 mutex_lock(&local->mtx);
1750 mutex_lock(&local->chanctx_mtx);
1751 ieee80211_link_unreserve_chanctx(link);
1752 mutex_unlock(&local->chanctx_mtx);
1754 if (link->csa_block_tx)
1755 ieee80211_wake_vif_queues(local, sdata,
1756 IEEE80211_QUEUE_STOP_REASON_CSA);
1758 link->csa_block_tx = false;
1759 link->conf->csa_active = false;
1761 mutex_unlock(&local->mtx);
1763 drv_abort_channel_switch(sdata);
1767 ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link,
1768 u64 timestamp, u32 device_timestamp,
1769 struct ieee802_11_elems *elems,
1772 struct ieee80211_sub_if_data *sdata = link->sdata;
1773 struct ieee80211_local *local = sdata->local;
1774 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1775 struct cfg80211_bss *cbss = link->u.mgd.bss;
1776 struct ieee80211_chanctx_conf *conf;
1777 struct ieee80211_chanctx *chanctx;
1778 enum nl80211_band current_band;
1779 struct ieee80211_csa_ie csa_ie;
1780 struct ieee80211_channel_switch ch_switch;
1781 struct ieee80211_bss *bss;
1784 sdata_assert_lock(sdata);
1789 if (local->scanning)
1792 current_band = cbss->channel->band;
1793 bss = (void *)cbss->priv;
1794 res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
1796 link->u.mgd.conn_flags,
1797 link->u.mgd.bssid, &csa_ie);
1800 ch_switch.timestamp = timestamp;
1801 ch_switch.device_timestamp = device_timestamp;
1802 ch_switch.block_tx = csa_ie.mode;
1803 ch_switch.chandef = csa_ie.chandef;
1804 ch_switch.count = csa_ie.count;
1805 ch_switch.delay = csa_ie.max_switch_time;
1809 goto lock_and_drop_connection;
1811 if (beacon && link->conf->csa_active &&
1812 !link->u.mgd.csa_waiting_bcn) {
1814 ieee80211_sta_abort_chanswitch(link);
1816 drv_channel_switch_rx_beacon(sdata, &ch_switch);
1818 } else if (link->conf->csa_active || res) {
1819 /* disregard subsequent announcements if already processing */
1823 if (link->conf->chandef.chan->band !=
1824 csa_ie.chandef.chan->band) {
1826 "AP %pM switches to different band (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1828 csa_ie.chandef.chan->center_freq,
1829 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1830 csa_ie.chandef.center_freq2);
1831 goto lock_and_drop_connection;
1834 if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
1835 IEEE80211_CHAN_DISABLED)) {
1837 "AP %pM switches to unsupported channel "
1838 "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), "
1841 csa_ie.chandef.chan->center_freq,
1842 csa_ie.chandef.chan->freq_offset,
1843 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1844 csa_ie.chandef.freq1_offset,
1845 csa_ie.chandef.center_freq2);
1846 goto lock_and_drop_connection;
1849 if (cfg80211_chandef_identical(&csa_ie.chandef,
1850 &link->conf->chandef) &&
1851 (!csa_ie.mode || !beacon)) {
1852 if (link->u.mgd.csa_ignored_same_chan)
1855 "AP %pM tries to chanswitch to same channel, ignore\n",
1857 link->u.mgd.csa_ignored_same_chan = true;
1862 * Drop all TDLS peers - either we disconnect or move to a different
1863 * channel from this point on. There's no telling what our peer will do.
1864 * The TDLS WIDER_BW scenario is also problematic, as peers might now
1865 * have an incompatible wider chandef.
1867 ieee80211_teardown_tdls_peers(sdata);
1869 mutex_lock(&local->mtx);
1870 mutex_lock(&local->chanctx_mtx);
1871 conf = rcu_dereference_protected(link->conf->chanctx_conf,
1872 lockdep_is_held(&local->chanctx_mtx));
1875 "no channel context assigned to vif?, disconnecting\n");
1876 goto drop_connection;
1879 chanctx = container_of(conf, struct ieee80211_chanctx, conf);
1881 if (local->use_chanctx &&
1882 !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) {
1884 "driver doesn't support chan-switch with channel contexts\n");
1885 goto drop_connection;
1888 if (drv_pre_channel_switch(sdata, &ch_switch)) {
1890 "preparing for channel switch failed, disconnecting\n");
1891 goto drop_connection;
1894 res = ieee80211_link_reserve_chanctx(link, &csa_ie.chandef,
1895 chanctx->mode, false);
1898 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1900 goto drop_connection;
1902 mutex_unlock(&local->chanctx_mtx);
1904 link->conf->csa_active = true;
1905 link->csa_chandef = csa_ie.chandef;
1906 link->csa_block_tx = csa_ie.mode;
1907 link->u.mgd.csa_ignored_same_chan = false;
1908 link->u.mgd.beacon_crc_valid = false;
1910 if (link->csa_block_tx)
1911 ieee80211_stop_vif_queues(local, sdata,
1912 IEEE80211_QUEUE_STOP_REASON_CSA);
1913 mutex_unlock(&local->mtx);
1915 cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef, 0,
1916 csa_ie.count, csa_ie.mode);
1918 if (local->ops->channel_switch) {
1919 /* use driver's channel switch callback */
1920 drv_channel_switch(local, sdata, &ch_switch);
1924 /* channel switch handled in software */
1925 if (csa_ie.count <= 1)
1926 ieee80211_queue_work(&local->hw, &link->u.mgd.chswitch_work);
1928 mod_timer(&link->u.mgd.chswitch_timer,
1929 TU_TO_EXP_TIME((csa_ie.count - 1) *
1930 cbss->beacon_interval));
1932 lock_and_drop_connection:
1933 mutex_lock(&local->mtx);
1934 mutex_lock(&local->chanctx_mtx);
1937 * This is just so that the disconnect flow will know that
1938 * we were trying to switch channel and failed. In case the
1939 * mode is 1 (we are not allowed to Tx), we will know not to
1940 * send a deauthentication frame. Those two fields will be
1941 * reset when the disconnection worker runs.
1943 link->conf->csa_active = true;
1944 link->csa_block_tx = csa_ie.mode;
1946 ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
1947 mutex_unlock(&local->chanctx_mtx);
1948 mutex_unlock(&local->mtx);
1952 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
1953 struct ieee80211_channel *channel,
1954 const u8 *country_ie, u8 country_ie_len,
1955 const u8 *pwr_constr_elem,
1956 int *chan_pwr, int *pwr_reduction)
1958 struct ieee80211_country_ie_triplet *triplet;
1959 int chan = ieee80211_frequency_to_channel(channel->center_freq);
1960 int i, chan_increment;
1961 bool have_chan_pwr = false;
1964 if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
1967 triplet = (void *)(country_ie + 3);
1968 country_ie_len -= 3;
1970 switch (channel->band) {
1974 case NL80211_BAND_2GHZ:
1975 case NL80211_BAND_60GHZ:
1976 case NL80211_BAND_LC:
1979 case NL80211_BAND_5GHZ:
1982 case NL80211_BAND_6GHZ:
1984 * In the 6 GHz band, the "maximum transmit power level"
1985 * field in the triplets is reserved, and thus will be
1986 * zero and we shouldn't use it to control TX power.
1987 * The actual TX power will be given in the transmit
1988 * power envelope element instead.
1994 while (country_ie_len >= 3) {
1995 u8 first_channel = triplet->chans.first_channel;
1997 if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
2000 for (i = 0; i < triplet->chans.num_channels; i++) {
2001 if (first_channel + i * chan_increment == chan) {
2002 have_chan_pwr = true;
2003 *chan_pwr = triplet->chans.max_power;
2012 country_ie_len -= 3;
2015 if (have_chan_pwr && pwr_constr_elem)
2016 *pwr_reduction = *pwr_constr_elem;
2020 return have_chan_pwr;
2023 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
2024 struct ieee80211_channel *channel,
2025 const u8 *cisco_dtpc_ie,
2028 /* From practical testing, the first data byte of the DTPC element
2029 * seems to contain the requested dBm level, and the CLI on Cisco
2030 * APs clearly state the range is -127 to 127 dBm, which indicates
2031 * a signed byte, although it seemingly never actually goes negative.
2032 * The other byte seems to always be zero.
2034 *pwr_level = (__s8)cisco_dtpc_ie[4];
2037 static u32 ieee80211_handle_pwr_constr(struct ieee80211_link_data *link,
2038 struct ieee80211_channel *channel,
2039 struct ieee80211_mgmt *mgmt,
2040 const u8 *country_ie, u8 country_ie_len,
2041 const u8 *pwr_constr_ie,
2042 const u8 *cisco_dtpc_ie)
2044 struct ieee80211_sub_if_data *sdata = link->sdata;
2045 bool has_80211h_pwr = false, has_cisco_pwr = false;
2046 int chan_pwr = 0, pwr_reduction_80211h = 0;
2047 int pwr_level_cisco, pwr_level_80211h;
2049 __le16 capab = mgmt->u.probe_resp.capab_info;
2051 if (ieee80211_is_s1g_beacon(mgmt->frame_control))
2052 return 0; /* TODO */
2055 (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
2056 capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
2057 has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
2058 sdata, channel, country_ie, country_ie_len,
2059 pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
2061 max_t(int, 0, chan_pwr - pwr_reduction_80211h);
2064 if (cisco_dtpc_ie) {
2065 ieee80211_find_cisco_dtpc(
2066 sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
2067 has_cisco_pwr = true;
2070 if (!has_80211h_pwr && !has_cisco_pwr)
2073 /* If we have both 802.11h and Cisco DTPC, apply both limits
2074 * by picking the smallest of the two power levels advertised.
2076 if (has_80211h_pwr &&
2077 (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
2078 new_ap_level = pwr_level_80211h;
2080 if (link->ap_power_level == new_ap_level)
2084 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
2085 pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
2087 } else { /* has_cisco_pwr is always true here. */
2088 new_ap_level = pwr_level_cisco;
2090 if (link->ap_power_level == new_ap_level)
2094 "Limiting TX power to %d dBm as advertised by %pM\n",
2095 pwr_level_cisco, link->u.mgd.bssid);
2098 link->ap_power_level = new_ap_level;
2099 if (__ieee80211_recalc_txpower(sdata))
2100 return BSS_CHANGED_TXPOWER;
2105 static void ieee80211_enable_ps(struct ieee80211_local *local,
2106 struct ieee80211_sub_if_data *sdata)
2108 struct ieee80211_conf *conf = &local->hw.conf;
2111 * If we are scanning right now then the parameters will
2112 * take effect when scan finishes.
2114 if (local->scanning)
2117 if (conf->dynamic_ps_timeout > 0 &&
2118 !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
2119 mod_timer(&local->dynamic_ps_timer, jiffies +
2120 msecs_to_jiffies(conf->dynamic_ps_timeout));
2122 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
2123 ieee80211_send_nullfunc(local, sdata, true);
2125 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
2126 ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
2129 conf->flags |= IEEE80211_CONF_PS;
2130 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2134 static void ieee80211_change_ps(struct ieee80211_local *local)
2136 struct ieee80211_conf *conf = &local->hw.conf;
2138 if (local->ps_sdata) {
2139 ieee80211_enable_ps(local, local->ps_sdata);
2140 } else if (conf->flags & IEEE80211_CONF_PS) {
2141 conf->flags &= ~IEEE80211_CONF_PS;
2142 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2143 del_timer_sync(&local->dynamic_ps_timer);
2144 cancel_work_sync(&local->dynamic_ps_enable_work);
2148 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
2150 struct ieee80211_local *local = sdata->local;
2151 struct ieee80211_if_managed *mgd = &sdata->u.mgd;
2152 struct sta_info *sta = NULL;
2153 bool authorized = false;
2155 if (!mgd->powersave)
2161 if (!mgd->associated)
2164 if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
2167 if (!(local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_MLO) &&
2168 !sdata->deflink.u.mgd.have_beacon)
2172 sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr);
2174 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
2180 /* need to hold RTNL or interface lock */
2181 void ieee80211_recalc_ps(struct ieee80211_local *local)
2183 struct ieee80211_sub_if_data *sdata, *found = NULL;
2187 if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS) ||
2188 ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
2189 local->ps_sdata = NULL;
2193 list_for_each_entry(sdata, &local->interfaces, list) {
2194 if (!ieee80211_sdata_running(sdata))
2196 if (sdata->vif.type == NL80211_IFTYPE_AP) {
2197 /* If an AP vif is found, then disable PS
2198 * by setting the count to zero thereby setting
2204 if (sdata->vif.type != NL80211_IFTYPE_STATION)
2210 if (count == 1 && ieee80211_powersave_allowed(found)) {
2211 u8 dtimper = found->deflink.u.mgd.dtim_period;
2213 timeout = local->dynamic_ps_forced_timeout;
2216 local->hw.conf.dynamic_ps_timeout = timeout;
2218 /* If the TIM IE is invalid, pretend the value is 1 */
2222 local->hw.conf.ps_dtim_period = dtimper;
2223 local->ps_sdata = found;
2225 local->ps_sdata = NULL;
2228 ieee80211_change_ps(local);
2231 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
2233 bool ps_allowed = ieee80211_powersave_allowed(sdata);
2235 if (sdata->vif.cfg.ps != ps_allowed) {
2236 sdata->vif.cfg.ps = ps_allowed;
2237 ieee80211_vif_cfg_change_notify(sdata, BSS_CHANGED_PS);
2241 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
2243 struct ieee80211_local *local =
2244 container_of(work, struct ieee80211_local,
2245 dynamic_ps_disable_work);
2247 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
2248 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
2249 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2252 ieee80211_wake_queues_by_reason(&local->hw,
2253 IEEE80211_MAX_QUEUE_MAP,
2254 IEEE80211_QUEUE_STOP_REASON_PS,
2258 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
2260 struct ieee80211_local *local =
2261 container_of(work, struct ieee80211_local,
2262 dynamic_ps_enable_work);
2263 struct ieee80211_sub_if_data *sdata = local->ps_sdata;
2264 struct ieee80211_if_managed *ifmgd;
2265 unsigned long flags;
2268 /* can only happen when PS was just disabled anyway */
2272 ifmgd = &sdata->u.mgd;
2274 if (local->hw.conf.flags & IEEE80211_CONF_PS)
2277 if (local->hw.conf.dynamic_ps_timeout > 0) {
2278 /* don't enter PS if TX frames are pending */
2279 if (drv_tx_frames_pending(local)) {
2280 mod_timer(&local->dynamic_ps_timer, jiffies +
2282 local->hw.conf.dynamic_ps_timeout));
2287 * transmission can be stopped by others which leads to
2288 * dynamic_ps_timer expiry. Postpone the ps timer if it
2289 * is not the actual idle state.
2291 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
2292 for (q = 0; q < local->hw.queues; q++) {
2293 if (local->queue_stop_reasons[q]) {
2294 spin_unlock_irqrestore(&local->queue_stop_reason_lock,
2296 mod_timer(&local->dynamic_ps_timer, jiffies +
2298 local->hw.conf.dynamic_ps_timeout));
2302 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
2305 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
2306 !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
2307 if (drv_tx_frames_pending(local)) {
2308 mod_timer(&local->dynamic_ps_timer, jiffies +
2310 local->hw.conf.dynamic_ps_timeout));
2312 ieee80211_send_nullfunc(local, sdata, true);
2313 /* Flush to get the tx status of nullfunc frame */
2314 ieee80211_flush_queues(local, sdata, false);
2318 if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
2319 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) ||
2320 (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
2321 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
2322 local->hw.conf.flags |= IEEE80211_CONF_PS;
2323 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2327 void ieee80211_dynamic_ps_timer(struct timer_list *t)
2329 struct ieee80211_local *local = from_timer(local, t, dynamic_ps_timer);
2331 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
2334 void ieee80211_dfs_cac_timer_work(struct work_struct *work)
2336 struct delayed_work *delayed_work = to_delayed_work(work);
2337 struct ieee80211_link_data *link =
2338 container_of(delayed_work, struct ieee80211_link_data,
2339 dfs_cac_timer_work);
2340 struct cfg80211_chan_def chandef = link->conf->chandef;
2341 struct ieee80211_sub_if_data *sdata = link->sdata;
2343 mutex_lock(&sdata->local->mtx);
2344 if (sdata->wdev.cac_started) {
2345 ieee80211_link_release_channel(link);
2346 cfg80211_cac_event(sdata->dev, &chandef,
2347 NL80211_RADAR_CAC_FINISHED,
2350 mutex_unlock(&sdata->local->mtx);
2354 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
2356 struct ieee80211_local *local = sdata->local;
2357 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2361 if (local->hw.queues < IEEE80211_NUM_ACS)
2364 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
2365 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
2367 unsigned long now = jiffies;
2369 if (tx_tspec->action == TX_TSPEC_ACTION_NONE &&
2370 tx_tspec->admitted_time &&
2371 time_after(now, tx_tspec->time_slice_start + HZ)) {
2372 tx_tspec->consumed_tx_time = 0;
2373 tx_tspec->time_slice_start = now;
2375 if (tx_tspec->downgraded)
2377 TX_TSPEC_ACTION_STOP_DOWNGRADE;
2380 switch (tx_tspec->action) {
2381 case TX_TSPEC_ACTION_STOP_DOWNGRADE:
2382 /* take the original parameters */
2383 if (drv_conf_tx(local, &sdata->deflink, ac,
2384 &sdata->deflink.tx_conf[ac]))
2385 link_err(&sdata->deflink,
2386 "failed to set TX queue parameters for queue %d\n",
2388 tx_tspec->action = TX_TSPEC_ACTION_NONE;
2389 tx_tspec->downgraded = false;
2392 case TX_TSPEC_ACTION_DOWNGRADE:
2393 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
2394 tx_tspec->action = TX_TSPEC_ACTION_NONE;
2398 /* downgrade next lower non-ACM AC */
2399 for (non_acm_ac = ac + 1;
2400 non_acm_ac < IEEE80211_NUM_ACS;
2402 if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac)))
2404 /* Usually the loop will result in using BK even if it
2405 * requires admission control, but such a configuration
2406 * makes no sense and we have to transmit somehow - the
2407 * AC selection does the same thing.
2408 * If we started out trying to downgrade from BK, then
2409 * the extra condition here might be needed.
2411 if (non_acm_ac >= IEEE80211_NUM_ACS)
2412 non_acm_ac = IEEE80211_AC_BK;
2413 if (drv_conf_tx(local, &sdata->deflink, ac,
2414 &sdata->deflink.tx_conf[non_acm_ac]))
2415 link_err(&sdata->deflink,
2416 "failed to set TX queue parameters for queue %d\n",
2418 tx_tspec->action = TX_TSPEC_ACTION_NONE;
2420 schedule_delayed_work(&ifmgd->tx_tspec_wk,
2421 tx_tspec->time_slice_start + HZ - now + 1);
2423 case TX_TSPEC_ACTION_NONE:
2432 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
2434 if (__ieee80211_sta_handle_tspec_ac_params(sdata))
2435 ieee80211_link_info_change_notify(sdata, &sdata->deflink,
2439 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work)
2441 struct ieee80211_sub_if_data *sdata;
2443 sdata = container_of(work, struct ieee80211_sub_if_data,
2444 u.mgd.tx_tspec_wk.work);
2445 ieee80211_sta_handle_tspec_ac_params(sdata);
2448 void ieee80211_mgd_set_link_qos_params(struct ieee80211_link_data *link)
2450 struct ieee80211_sub_if_data *sdata = link->sdata;
2451 struct ieee80211_local *local = sdata->local;
2452 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2453 struct ieee80211_tx_queue_params *params = link->tx_conf;
2456 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
2458 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
2460 params[ac].aifs, params[ac].cw_min, params[ac].cw_max,
2461 params[ac].txop, params[ac].uapsd,
2462 ifmgd->tx_tspec[ac].downgraded);
2463 if (!ifmgd->tx_tspec[ac].downgraded &&
2464 drv_conf_tx(local, link, ac, ¶ms[ac]))
2466 "failed to set TX queue parameters for AC %d\n",
2473 ieee80211_sta_wmm_params(struct ieee80211_local *local,
2474 struct ieee80211_link_data *link,
2475 const u8 *wmm_param, size_t wmm_param_len,
2476 const struct ieee80211_mu_edca_param_set *mu_edca)
2478 struct ieee80211_sub_if_data *sdata = link->sdata;
2479 struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS];
2480 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2482 int count, mu_edca_count, ac;
2484 u8 uapsd_queues = 0;
2486 if (!local->ops->conf_tx)
2489 if (local->hw.queues < IEEE80211_NUM_ACS)
2495 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
2498 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
2499 uapsd_queues = ifmgd->uapsd_queues;
2501 count = wmm_param[6] & 0x0f;
2502 /* -1 is the initial value of ifmgd->mu_edca_last_param_set.
2503 * if mu_edca was preset before and now it disappeared tell
2504 * the driver about it.
2506 mu_edca_count = mu_edca ? mu_edca->mu_qos_info & 0x0f : -1;
2507 if (count == link->u.mgd.wmm_last_param_set &&
2508 mu_edca_count == link->u.mgd.mu_edca_last_param_set)
2510 link->u.mgd.wmm_last_param_set = count;
2511 link->u.mgd.mu_edca_last_param_set = mu_edca_count;
2513 pos = wmm_param + 8;
2514 left = wmm_param_len - 8;
2516 memset(¶ms, 0, sizeof(params));
2519 for (; left >= 4; left -= 4, pos += 4) {
2520 int aci = (pos[0] >> 5) & 0x03;
2521 int acm = (pos[0] >> 4) & 0x01;
2526 ac = IEEE80211_AC_BK;
2528 sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
2529 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
2531 params[ac].mu_edca = !!mu_edca;
2533 params[ac].mu_edca_param_rec = mu_edca->ac_bk;
2536 ac = IEEE80211_AC_VI;
2538 sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
2539 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
2541 params[ac].mu_edca = !!mu_edca;
2543 params[ac].mu_edca_param_rec = mu_edca->ac_vi;
2546 ac = IEEE80211_AC_VO;
2548 sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
2549 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
2551 params[ac].mu_edca = !!mu_edca;
2553 params[ac].mu_edca_param_rec = mu_edca->ac_vo;
2557 ac = IEEE80211_AC_BE;
2559 sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
2560 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
2562 params[ac].mu_edca = !!mu_edca;
2564 params[ac].mu_edca_param_rec = mu_edca->ac_be;
2568 params[ac].aifs = pos[0] & 0x0f;
2570 if (params[ac].aifs < 2) {
2572 "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n",
2573 params[ac].aifs, aci);
2574 params[ac].aifs = 2;
2576 params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
2577 params[ac].cw_min = ecw2cw(pos[1] & 0x0f);
2578 params[ac].txop = get_unaligned_le16(pos + 2);
2579 params[ac].acm = acm;
2580 params[ac].uapsd = uapsd;
2582 if (params[ac].cw_min == 0 ||
2583 params[ac].cw_min > params[ac].cw_max) {
2585 "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n",
2586 params[ac].cw_min, params[ac].cw_max, aci);
2589 ieee80211_regulatory_limit_wmm_params(sdata, ¶ms[ac], ac);
2592 /* WMM specification requires all 4 ACIs. */
2593 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
2594 if (params[ac].cw_min == 0) {
2596 "AP has invalid WMM params (missing AC %d), using defaults\n",
2602 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
2603 link->tx_conf[ac] = params[ac];
2605 ieee80211_mgd_set_link_qos_params(link);
2607 /* enable WMM or activate new settings */
2608 link->conf->qos = true;
2612 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
2614 lockdep_assert_held(&sdata->local->mtx);
2616 sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
2617 ieee80211_run_deferred_scan(sdata->local);
2620 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
2622 mutex_lock(&sdata->local->mtx);
2623 __ieee80211_stop_poll(sdata);
2624 mutex_unlock(&sdata->local->mtx);
2627 static u32 ieee80211_handle_bss_capability(struct ieee80211_link_data *link,
2628 u16 capab, bool erp_valid, u8 erp)
2630 struct ieee80211_bss_conf *bss_conf = link->conf;
2631 struct ieee80211_supported_band *sband;
2633 bool use_protection;
2634 bool use_short_preamble;
2635 bool use_short_slot;
2637 sband = ieee80211_get_link_sband(link);
2642 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
2643 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
2645 use_protection = false;
2646 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
2649 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
2650 if (sband->band == NL80211_BAND_5GHZ ||
2651 sband->band == NL80211_BAND_6GHZ)
2652 use_short_slot = true;
2654 if (use_protection != bss_conf->use_cts_prot) {
2655 bss_conf->use_cts_prot = use_protection;
2656 changed |= BSS_CHANGED_ERP_CTS_PROT;
2659 if (use_short_preamble != bss_conf->use_short_preamble) {
2660 bss_conf->use_short_preamble = use_short_preamble;
2661 changed |= BSS_CHANGED_ERP_PREAMBLE;
2664 if (use_short_slot != bss_conf->use_short_slot) {
2665 bss_conf->use_short_slot = use_short_slot;
2666 changed |= BSS_CHANGED_ERP_SLOT;
2672 static u32 ieee80211_link_set_associated(struct ieee80211_link_data *link,
2673 struct cfg80211_bss *cbss)
2675 struct ieee80211_sub_if_data *sdata = link->sdata;
2676 struct ieee80211_bss_conf *bss_conf = link->conf;
2677 struct ieee80211_bss *bss = (void *)cbss->priv;
2678 u32 changed = BSS_CHANGED_QOS;
2680 /* not really used in MLO */
2681 sdata->u.mgd.beacon_timeout =
2682 usecs_to_jiffies(ieee80211_tu_to_usec(beacon_loss_count *
2683 bss_conf->beacon_int));
2685 changed |= ieee80211_handle_bss_capability(link,
2686 bss_conf->assoc_capability,
2690 ieee80211_check_rate_mask(link);
2692 link->u.mgd.bss = cbss;
2693 memcpy(link->u.mgd.bssid, cbss->bssid, ETH_ALEN);
2695 if (sdata->vif.p2p ||
2696 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
2697 const struct cfg80211_bss_ies *ies;
2700 ies = rcu_dereference(cbss->ies);
2704 ret = cfg80211_get_p2p_attr(
2705 ies->data, ies->len,
2706 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
2707 (u8 *) &bss_conf->p2p_noa_attr,
2708 sizeof(bss_conf->p2p_noa_attr));
2710 link->u.mgd.p2p_noa_index =
2711 bss_conf->p2p_noa_attr.index;
2712 changed |= BSS_CHANGED_P2P_PS;
2718 if (link->u.mgd.have_beacon) {
2720 * If the AP is buggy we may get here with no DTIM period
2721 * known, so assume it's 1 which is the only safe assumption
2722 * in that case, although if the TIM IE is broken powersave
2723 * probably just won't work at all.
2725 bss_conf->dtim_period = link->u.mgd.dtim_period ?: 1;
2726 bss_conf->beacon_rate = bss->beacon_rate;
2727 changed |= BSS_CHANGED_BEACON_INFO;
2729 bss_conf->beacon_rate = NULL;
2730 bss_conf->dtim_period = 0;
2733 /* Tell the driver to monitor connection quality (if supported) */
2734 if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
2735 bss_conf->cqm_rssi_thold)
2736 changed |= BSS_CHANGED_CQM;
2741 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
2742 struct ieee80211_mgd_assoc_data *assoc_data,
2743 u64 changed[IEEE80211_MLD_MAX_NUM_LINKS])
2745 struct ieee80211_local *local = sdata->local;
2746 struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg;
2747 u64 vif_changed = BSS_CHANGED_ASSOC;
2748 unsigned int link_id;
2750 sdata->u.mgd.associated = true;
2752 for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
2753 struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
2754 struct ieee80211_link_data *link;
2759 link = sdata_dereference(sdata->link[link_id], sdata);
2763 changed[link_id] |= ieee80211_link_set_associated(link, cbss);
2766 /* just to be sure */
2767 ieee80211_stop_poll(sdata);
2769 ieee80211_led_assoc(local, 1);
2773 /* Enable ARP filtering */
2774 if (vif_cfg->arp_addr_cnt)
2775 vif_changed |= BSS_CHANGED_ARP_FILTER;
2777 if (sdata->vif.valid_links) {
2779 link_id < IEEE80211_MLD_MAX_NUM_LINKS;
2781 struct ieee80211_link_data *link;
2782 struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
2787 link = sdata_dereference(sdata->link[link_id], sdata);
2791 ieee80211_link_info_change_notify(sdata, link,
2794 ieee80211_recalc_smps(sdata, link);
2797 ieee80211_vif_cfg_change_notify(sdata, vif_changed);
2799 ieee80211_bss_info_change_notify(sdata,
2800 vif_changed | changed[0]);
2803 mutex_lock(&local->iflist_mtx);
2804 ieee80211_recalc_ps(local);
2805 mutex_unlock(&local->iflist_mtx);
2807 /* leave this here to not change ordering in non-MLO cases */
2808 if (!sdata->vif.valid_links)
2809 ieee80211_recalc_smps(sdata, &sdata->deflink);
2810 ieee80211_recalc_ps_vif(sdata);
2812 netif_carrier_on(sdata->dev);
2815 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
2816 u16 stype, u16 reason, bool tx,
2819 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2820 struct ieee80211_local *local = sdata->local;
2821 unsigned int link_id;
2823 struct ieee80211_prep_tx_info info = {
2827 sdata_assert_lock(sdata);
2829 if (WARN_ON_ONCE(tx && !frame_buf))
2832 if (WARN_ON(!ifmgd->associated))
2835 ieee80211_stop_poll(sdata);
2837 ifmgd->associated = false;
2839 /* other links will be destroyed */
2840 sdata->deflink.u.mgd.bss = NULL;
2842 netif_carrier_off(sdata->dev);
2845 * if we want to get out of ps before disassoc (why?) we have
2846 * to do it before sending disassoc, as otherwise the null-packet
2849 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
2850 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
2851 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2853 local->ps_sdata = NULL;
2855 /* disable per-vif ps */
2856 ieee80211_recalc_ps_vif(sdata);
2858 /* make sure ongoing transmission finishes */
2862 * drop any frame before deauth/disassoc, this can be data or
2863 * management frame. Since we are disconnecting, we should not
2864 * insist sending these frames which can take time and delay
2865 * the disconnection and possible the roaming.
2868 ieee80211_flush_queues(local, sdata, true);
2870 /* deauthenticate/disassociate now */
2871 if (tx || frame_buf) {
2873 * In multi channel scenarios guarantee that the virtual
2874 * interface is granted immediate airtime to transmit the
2875 * deauthentication frame by calling mgd_prepare_tx, if the
2876 * driver requested so.
2878 if (ieee80211_hw_check(&local->hw, DEAUTH_NEED_MGD_TX_PREP) &&
2879 !sdata->deflink.u.mgd.have_beacon) {
2880 drv_mgd_prepare_tx(sdata->local, sdata, &info);
2883 ieee80211_send_deauth_disassoc(sdata, sdata->vif.cfg.ap_addr,
2884 sdata->vif.cfg.ap_addr, stype,
2885 reason, tx, frame_buf);
2888 /* flush out frame - make sure the deauth was actually sent */
2890 ieee80211_flush_queues(local, sdata, false);
2892 drv_mgd_complete_tx(sdata->local, sdata, &info);
2894 /* clear AP addr only after building the needed mgmt frames */
2895 eth_zero_addr(sdata->deflink.u.mgd.bssid);
2896 eth_zero_addr(sdata->vif.cfg.ap_addr);
2898 sdata->vif.cfg.ssid_len = 0;
2900 /* remove AP and TDLS peers */
2901 sta_info_flush(sdata);
2903 /* finally reset all BSS / config parameters */
2904 if (!sdata->vif.valid_links)
2905 changed |= ieee80211_reset_erp_info(sdata);
2907 ieee80211_led_assoc(local, 0);
2908 changed |= BSS_CHANGED_ASSOC;
2909 sdata->vif.cfg.assoc = false;
2911 sdata->deflink.u.mgd.p2p_noa_index = -1;
2912 memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
2913 sizeof(sdata->vif.bss_conf.p2p_noa_attr));
2915 /* on the next assoc, re-program HT/VHT parameters */
2916 memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
2917 memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
2918 memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
2919 memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
2922 * reset MU-MIMO ownership and group data in default link,
2923 * if used, other links are destroyed
2925 memset(sdata->vif.bss_conf.mu_group.membership, 0,
2926 sizeof(sdata->vif.bss_conf.mu_group.membership));
2927 memset(sdata->vif.bss_conf.mu_group.position, 0,
2928 sizeof(sdata->vif.bss_conf.mu_group.position));
2929 if (!sdata->vif.valid_links)
2930 changed |= BSS_CHANGED_MU_GROUPS;
2931 sdata->vif.bss_conf.mu_mimo_owner = false;
2933 sdata->deflink.ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
2935 del_timer_sync(&local->dynamic_ps_timer);
2936 cancel_work_sync(&local->dynamic_ps_enable_work);
2938 /* Disable ARP filtering */
2939 if (sdata->vif.cfg.arp_addr_cnt)
2940 changed |= BSS_CHANGED_ARP_FILTER;
2942 sdata->vif.bss_conf.qos = false;
2943 if (!sdata->vif.valid_links) {
2944 changed |= BSS_CHANGED_QOS;
2945 /* The BSSID (not really interesting) and HT changed */
2946 changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
2947 ieee80211_bss_info_change_notify(sdata, changed);
2949 ieee80211_vif_cfg_change_notify(sdata, changed);
2952 /* disassociated - set to defaults now */
2953 ieee80211_set_wmm_default(&sdata->deflink, false, false);
2955 del_timer_sync(&sdata->u.mgd.conn_mon_timer);
2956 del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
2957 del_timer_sync(&sdata->u.mgd.timer);
2958 del_timer_sync(&sdata->deflink.u.mgd.chswitch_timer);
2960 sdata->vif.bss_conf.dtim_period = 0;
2961 sdata->vif.bss_conf.beacon_rate = NULL;
2963 sdata->deflink.u.mgd.have_beacon = false;
2964 sdata->deflink.u.mgd.tracking_signal_avg = false;
2965 sdata->deflink.u.mgd.disable_wmm_tracking = false;
2968 sdata->deflink.u.mgd.conn_flags = 0;
2969 mutex_lock(&local->mtx);
2971 for (link_id = 0; link_id < ARRAY_SIZE(sdata->link); link_id++) {
2972 struct ieee80211_link_data *link;
2974 link = sdata_dereference(sdata->link[link_id], sdata);
2977 ieee80211_link_release_channel(link);
2980 sdata->vif.bss_conf.csa_active = false;
2981 sdata->deflink.u.mgd.csa_waiting_bcn = false;
2982 sdata->deflink.u.mgd.csa_ignored_same_chan = false;
2983 if (sdata->deflink.csa_block_tx) {
2984 ieee80211_wake_vif_queues(local, sdata,
2985 IEEE80211_QUEUE_STOP_REASON_CSA);
2986 sdata->deflink.csa_block_tx = false;
2988 mutex_unlock(&local->mtx);
2990 /* existing TX TSPEC sessions no longer exist */
2991 memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec));
2992 cancel_delayed_work_sync(&ifmgd->tx_tspec_wk);
2994 sdata->vif.bss_conf.pwr_reduction = 0;
2995 sdata->vif.bss_conf.tx_pwr_env_num = 0;
2996 memset(sdata->vif.bss_conf.tx_pwr_env, 0,
2997 sizeof(sdata->vif.bss_conf.tx_pwr_env));
2999 ieee80211_vif_set_links(sdata, 0);
3002 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
3004 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3005 struct ieee80211_local *local = sdata->local;
3007 mutex_lock(&local->mtx);
3008 if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
3011 __ieee80211_stop_poll(sdata);
3013 mutex_lock(&local->iflist_mtx);
3014 ieee80211_recalc_ps(local);
3015 mutex_unlock(&local->iflist_mtx);
3017 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
3021 * We've received a probe response, but are not sure whether
3022 * we have or will be receiving any beacons or data, so let's
3023 * schedule the timers again, just in case.
3025 ieee80211_sta_reset_beacon_monitor(sdata);
3027 mod_timer(&ifmgd->conn_mon_timer,
3028 round_jiffies_up(jiffies +
3029 IEEE80211_CONNECTION_IDLE_TIME));
3031 mutex_unlock(&local->mtx);
3034 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
3035 struct ieee80211_hdr *hdr,
3038 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3041 struct ieee80211_sta_tx_tspec *tx_tspec;
3042 unsigned long now = jiffies;
3044 if (!ieee80211_is_data_qos(hdr->frame_control))
3047 tid = ieee80211_get_tid(hdr);
3048 ac = ieee80211_ac_from_tid(tid);
3049 tx_tspec = &ifmgd->tx_tspec[ac];
3051 if (likely(!tx_tspec->admitted_time))
3054 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
3055 tx_tspec->consumed_tx_time = 0;
3056 tx_tspec->time_slice_start = now;
3058 if (tx_tspec->downgraded) {
3059 tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
3060 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
3064 if (tx_tspec->downgraded)
3067 tx_tspec->consumed_tx_time += tx_time;
3069 if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) {
3070 tx_tspec->downgraded = true;
3071 tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE;
3072 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
3076 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
3077 struct ieee80211_hdr *hdr, bool ack, u16 tx_time)
3079 ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time);
3081 if (!ieee80211_is_any_nullfunc(hdr->frame_control) ||
3082 !sdata->u.mgd.probe_send_count)
3086 sdata->u.mgd.probe_send_count = 0;
3088 sdata->u.mgd.nullfunc_failed = true;
3089 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
3092 static void ieee80211_mlme_send_probe_req(struct ieee80211_sub_if_data *sdata,
3093 const u8 *src, const u8 *dst,
3094 const u8 *ssid, size_t ssid_len,
3095 struct ieee80211_channel *channel)
3097 struct sk_buff *skb;
3099 skb = ieee80211_build_probe_req(sdata, src, dst, (u32)-1, channel,
3100 ssid, ssid_len, NULL, 0,
3101 IEEE80211_PROBE_FLAG_DIRECTED);
3103 ieee80211_tx_skb(sdata, skb);
3106 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
3108 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3109 u8 *dst = sdata->vif.cfg.ap_addr;
3110 u8 unicast_limit = max(1, max_probe_tries - 3);
3111 struct sta_info *sta;
3113 if (WARN_ON(sdata->vif.valid_links))
3117 * Try sending broadcast probe requests for the last three
3118 * probe requests after the first ones failed since some
3119 * buggy APs only support broadcast probe requests.
3121 if (ifmgd->probe_send_count >= unicast_limit)
3125 * When the hardware reports an accurate Tx ACK status, it's
3126 * better to send a nullfunc frame instead of a probe request,
3127 * as it will kick us off the AP quickly if we aren't associated
3128 * anymore. The timeout will be reset if the frame is ACKed by
3131 ifmgd->probe_send_count++;
3134 mutex_lock(&sdata->local->sta_mtx);
3135 sta = sta_info_get(sdata, dst);
3137 ieee80211_check_fast_rx(sta);
3138 mutex_unlock(&sdata->local->sta_mtx);
3141 if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) {
3142 ifmgd->nullfunc_failed = false;
3143 ieee80211_send_nullfunc(sdata->local, sdata, false);
3145 ieee80211_mlme_send_probe_req(sdata, sdata->vif.addr, dst,
3146 sdata->vif.cfg.ssid,
3147 sdata->vif.cfg.ssid_len,
3148 sdata->deflink.u.mgd.bss->channel);
3151 ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
3152 run_again(sdata, ifmgd->probe_timeout);
3155 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
3158 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3159 bool already = false;
3161 if (WARN_ON(sdata->vif.valid_links))
3164 if (!ieee80211_sdata_running(sdata))
3169 if (!ifmgd->associated)
3172 mutex_lock(&sdata->local->mtx);
3174 if (sdata->local->tmp_channel || sdata->local->scanning) {
3175 mutex_unlock(&sdata->local->mtx);
3179 if (sdata->local->suspending) {
3180 /* reschedule after resume */
3181 mutex_unlock(&sdata->local->mtx);
3182 ieee80211_reset_ap_probe(sdata);
3187 mlme_dbg_ratelimited(sdata,
3188 "detected beacon loss from AP (missed %d beacons) - probing\n",
3191 ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL);
3195 * The driver/our work has already reported this event or the
3196 * connection monitoring has kicked in and we have already sent
3197 * a probe request. Or maybe the AP died and the driver keeps
3198 * reporting until we disassociate...
3200 * In either case we have to ignore the current call to this
3201 * function (except for setting the correct probe reason bit)
3202 * because otherwise we would reset the timer every time and
3203 * never check whether we received a probe response!
3205 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
3208 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
3210 mutex_unlock(&sdata->local->mtx);
3215 mutex_lock(&sdata->local->iflist_mtx);
3216 ieee80211_recalc_ps(sdata->local);
3217 mutex_unlock(&sdata->local->iflist_mtx);
3219 ifmgd->probe_send_count = 0;
3220 ieee80211_mgd_probe_ap_send(sdata);
3222 sdata_unlock(sdata);
3225 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
3226 struct ieee80211_vif *vif)
3228 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
3229 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3230 struct cfg80211_bss *cbss;
3231 struct sk_buff *skb;
3232 const struct element *ssid;
3235 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION ||
3236 sdata->vif.valid_links))
3239 sdata_assert_lock(sdata);
3241 if (ifmgd->associated)
3242 cbss = sdata->deflink.u.mgd.bss;
3243 else if (ifmgd->auth_data)
3244 cbss = ifmgd->auth_data->bss;
3245 else if (ifmgd->assoc_data && ifmgd->assoc_data->link[0].bss)
3246 cbss = ifmgd->assoc_data->link[0].bss;
3251 ssid = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID);
3252 if (WARN_ONCE(!ssid || ssid->datalen > IEEE80211_MAX_SSID_LEN,
3253 "invalid SSID element (len=%d)",
3254 ssid ? ssid->datalen : -1))
3257 ssid_len = ssid->datalen;
3259 skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid,
3260 (u32) -1, cbss->channel,
3261 ssid->data, ssid_len,
3262 NULL, 0, IEEE80211_PROBE_FLAG_DIRECTED);
3267 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
3269 static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
3270 const u8 *buf, size_t len, bool tx,
3271 u16 reason, bool reconnect)
3273 struct ieee80211_event event = {
3275 .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT,
3276 .u.mlme.reason = reason,
3280 cfg80211_tx_mlme_mgmt(sdata->dev, buf, len, reconnect);
3282 cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
3284 drv_event_callback(sdata->local, sdata, &event);
3287 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
3289 struct ieee80211_local *local = sdata->local;
3290 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3291 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
3295 if (!ifmgd->associated) {
3296 sdata_unlock(sdata);
3300 /* in MLO assume we have a link where we can TX the frame */
3301 tx = sdata->vif.valid_links || !sdata->deflink.csa_block_tx;
3303 if (!ifmgd->driver_disconnect) {
3304 unsigned int link_id;
3307 * AP is probably out of range (or not reachable for another
3308 * reason) so remove the bss structs for that AP. In the case
3309 * of multi-link, it's not clear that all of them really are
3310 * out of range, but if they weren't the driver likely would
3311 * have switched to just have a single link active?
3314 link_id < ARRAY_SIZE(sdata->link);
3316 struct ieee80211_link_data *link;
3318 link = sdata_dereference(sdata->link[link_id], sdata);
3321 cfg80211_unlink_bss(local->hw.wiphy, link->u.mgd.bss);
3322 link->u.mgd.bss = NULL;
3326 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
3327 ifmgd->driver_disconnect ?
3328 WLAN_REASON_DEAUTH_LEAVING :
3329 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
3331 mutex_lock(&local->mtx);
3332 /* the other links will be destroyed */
3333 sdata->vif.bss_conf.csa_active = false;
3334 sdata->deflink.u.mgd.csa_waiting_bcn = false;
3335 if (sdata->deflink.csa_block_tx) {
3336 ieee80211_wake_vif_queues(local, sdata,
3337 IEEE80211_QUEUE_STOP_REASON_CSA);
3338 sdata->deflink.csa_block_tx = false;
3340 mutex_unlock(&local->mtx);
3342 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx,
3343 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
3345 ifmgd->reconnect = false;
3347 sdata_unlock(sdata);
3350 static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
3352 struct ieee80211_sub_if_data *sdata =
3353 container_of(work, struct ieee80211_sub_if_data,
3354 u.mgd.beacon_connection_loss_work);
3355 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3357 if (ifmgd->connection_loss) {
3358 sdata_info(sdata, "Connection to AP %pM lost\n",
3359 sdata->vif.cfg.ap_addr);
3360 __ieee80211_disconnect(sdata);
3361 ifmgd->connection_loss = false;
3362 } else if (ifmgd->driver_disconnect) {
3364 "Driver requested disconnection from AP %pM\n",
3365 sdata->vif.cfg.ap_addr);
3366 __ieee80211_disconnect(sdata);
3367 ifmgd->driver_disconnect = false;
3369 if (ifmgd->associated)
3370 sdata->deflink.u.mgd.beacon_loss_count++;
3371 ieee80211_mgd_probe_ap(sdata, true);
3375 static void ieee80211_csa_connection_drop_work(struct work_struct *work)
3377 struct ieee80211_sub_if_data *sdata =
3378 container_of(work, struct ieee80211_sub_if_data,
3379 u.mgd.csa_connection_drop_work);
3381 __ieee80211_disconnect(sdata);
3384 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
3386 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
3387 struct ieee80211_hw *hw = &sdata->local->hw;
3389 trace_api_beacon_loss(sdata);
3391 sdata->u.mgd.connection_loss = false;
3392 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
3394 EXPORT_SYMBOL(ieee80211_beacon_loss);
3396 void ieee80211_connection_loss(struct ieee80211_vif *vif)
3398 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
3399 struct ieee80211_hw *hw = &sdata->local->hw;
3401 trace_api_connection_loss(sdata);
3403 sdata->u.mgd.connection_loss = true;
3404 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
3406 EXPORT_SYMBOL(ieee80211_connection_loss);
3408 void ieee80211_disconnect(struct ieee80211_vif *vif, bool reconnect)
3410 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
3411 struct ieee80211_hw *hw = &sdata->local->hw;
3413 trace_api_disconnect(sdata, reconnect);
3415 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
3418 sdata->u.mgd.driver_disconnect = true;
3419 sdata->u.mgd.reconnect = reconnect;
3420 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
3422 EXPORT_SYMBOL(ieee80211_disconnect);
3424 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
3427 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
3429 sdata_assert_lock(sdata);
3433 * we are not authenticated yet, the only timer that could be
3434 * running is the timeout for the authentication response which
3435 * which is not relevant anymore.
3437 del_timer_sync(&sdata->u.mgd.timer);
3438 sta_info_destroy_addr(sdata, auth_data->ap_addr);
3440 /* other links are destroyed */
3441 sdata->deflink.u.mgd.conn_flags = 0;
3442 eth_zero_addr(sdata->deflink.u.mgd.bssid);
3443 ieee80211_link_info_change_notify(sdata, &sdata->deflink,
3445 sdata->u.mgd.flags = 0;
3447 mutex_lock(&sdata->local->mtx);
3448 ieee80211_link_release_channel(&sdata->deflink);
3449 ieee80211_vif_set_links(sdata, 0);
3450 mutex_unlock(&sdata->local->mtx);
3453 cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
3455 sdata->u.mgd.auth_data = NULL;
3465 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
3466 enum assoc_status status)
3468 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
3470 sdata_assert_lock(sdata);
3472 if (status != ASSOC_SUCCESS) {
3474 * we are not associated yet, the only timer that could be
3475 * running is the timeout for the association response which
3476 * which is not relevant anymore.
3478 del_timer_sync(&sdata->u.mgd.timer);
3479 sta_info_destroy_addr(sdata, assoc_data->ap_addr);
3481 sdata->deflink.u.mgd.conn_flags = 0;
3482 eth_zero_addr(sdata->deflink.u.mgd.bssid);
3483 ieee80211_link_info_change_notify(sdata, &sdata->deflink,
3485 sdata->u.mgd.flags = 0;
3486 sdata->vif.bss_conf.mu_mimo_owner = false;
3488 if (status != ASSOC_REJECTED) {
3489 struct cfg80211_assoc_failure data = {
3490 .timeout = status == ASSOC_TIMEOUT,
3494 BUILD_BUG_ON(ARRAY_SIZE(data.bss) !=
3495 ARRAY_SIZE(assoc_data->link));
3497 for (i = 0; i < ARRAY_SIZE(data.bss); i++)
3498 data.bss[i] = assoc_data->link[i].bss;
3500 if (sdata->vif.valid_links)
3501 data.ap_mld_addr = assoc_data->ap_addr;
3503 cfg80211_assoc_failure(sdata->dev, &data);
3506 mutex_lock(&sdata->local->mtx);
3507 ieee80211_link_release_channel(&sdata->deflink);
3508 ieee80211_vif_set_links(sdata, 0);
3509 mutex_unlock(&sdata->local->mtx);
3513 sdata->u.mgd.assoc_data = NULL;
3516 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
3517 struct ieee80211_mgmt *mgmt, size_t len)
3519 struct ieee80211_local *local = sdata->local;
3520 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
3521 const struct element *challenge;
3524 struct ieee80211_prep_tx_info info = {
3525 .subtype = IEEE80211_STYPE_AUTH,
3528 pos = mgmt->u.auth.variable;
3529 challenge = cfg80211_find_elem(WLAN_EID_CHALLENGE, pos,
3530 len - (pos - (u8 *)mgmt));
3533 auth_data->expected_transaction = 4;
3534 drv_mgd_prepare_tx(sdata->local, sdata, &info);
3535 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
3536 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
3537 IEEE80211_TX_INTFL_MLME_CONN_TX;
3538 ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
3540 challenge->datalen + sizeof(*challenge),
3541 auth_data->ap_addr, auth_data->ap_addr,
3542 auth_data->key, auth_data->key_len,
3543 auth_data->key_idx, tx_flags);
3546 static bool ieee80211_mark_sta_auth(struct ieee80211_sub_if_data *sdata)
3548 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3549 const u8 *ap_addr = ifmgd->auth_data->ap_addr;
3550 struct sta_info *sta;
3553 sdata_info(sdata, "authenticated\n");
3554 ifmgd->auth_data->done = true;
3555 ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
3556 ifmgd->auth_data->timeout_started = true;
3557 run_again(sdata, ifmgd->auth_data->timeout);
3559 /* move station state to auth */
3560 mutex_lock(&sdata->local->sta_mtx);
3561 sta = sta_info_get(sdata, ap_addr);
3563 WARN_ONCE(1, "%s: STA %pM not found", sdata->name, ap_addr);
3567 if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
3568 sdata_info(sdata, "failed moving %pM to auth\n", ap_addr);
3574 mutex_unlock(&sdata->local->sta_mtx);
3578 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
3579 struct ieee80211_mgmt *mgmt, size_t len)
3581 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3582 u16 auth_alg, auth_transaction, status_code;
3583 struct ieee80211_event event = {
3585 .u.mlme.data = AUTH_EVENT,
3587 struct ieee80211_prep_tx_info info = {
3588 .subtype = IEEE80211_STYPE_AUTH,
3591 sdata_assert_lock(sdata);
3596 if (!ifmgd->auth_data || ifmgd->auth_data->done)
3599 if (!ether_addr_equal(ifmgd->auth_data->ap_addr, mgmt->bssid))
3602 auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
3603 auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
3604 status_code = le16_to_cpu(mgmt->u.auth.status_code);
3606 if (auth_alg != ifmgd->auth_data->algorithm ||
3607 (auth_alg != WLAN_AUTH_SAE &&
3608 auth_transaction != ifmgd->auth_data->expected_transaction) ||
3609 (auth_alg == WLAN_AUTH_SAE &&
3610 (auth_transaction < ifmgd->auth_data->expected_transaction ||
3611 auth_transaction > 2))) {
3612 sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
3613 mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
3615 ifmgd->auth_data->expected_transaction);
3619 if (status_code != WLAN_STATUS_SUCCESS) {
3620 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
3622 if (auth_alg == WLAN_AUTH_SAE &&
3623 (status_code == WLAN_STATUS_ANTI_CLOG_REQUIRED ||
3624 (auth_transaction == 1 &&
3625 (status_code == WLAN_STATUS_SAE_HASH_TO_ELEMENT ||
3626 status_code == WLAN_STATUS_SAE_PK)))) {
3627 /* waiting for userspace now */
3628 ifmgd->auth_data->waiting = true;
3629 ifmgd->auth_data->timeout =
3630 jiffies + IEEE80211_AUTH_WAIT_SAE_RETRY;
3631 ifmgd->auth_data->timeout_started = true;
3632 run_again(sdata, ifmgd->auth_data->timeout);
3636 sdata_info(sdata, "%pM denied authentication (status %d)\n",
3637 mgmt->sa, status_code);
3638 ieee80211_destroy_auth_data(sdata, false);
3639 event.u.mlme.status = MLME_DENIED;
3640 event.u.mlme.reason = status_code;
3641 drv_event_callback(sdata->local, sdata, &event);
3645 switch (ifmgd->auth_data->algorithm) {
3646 case WLAN_AUTH_OPEN:
3647 case WLAN_AUTH_LEAP:
3650 case WLAN_AUTH_FILS_SK:
3651 case WLAN_AUTH_FILS_SK_PFS:
3652 case WLAN_AUTH_FILS_PK:
3654 case WLAN_AUTH_SHARED_KEY:
3655 if (ifmgd->auth_data->expected_transaction != 4) {
3656 ieee80211_auth_challenge(sdata, mgmt, len);
3657 /* need another frame */
3662 WARN_ONCE(1, "invalid auth alg %d",
3663 ifmgd->auth_data->algorithm);
3667 event.u.mlme.status = MLME_SUCCESS;
3669 drv_event_callback(sdata->local, sdata, &event);
3670 if (ifmgd->auth_data->algorithm != WLAN_AUTH_SAE ||
3671 (auth_transaction == 2 &&
3672 ifmgd->auth_data->expected_transaction == 2)) {
3673 if (!ieee80211_mark_sta_auth(sdata))
3674 return; /* ignore frame -- wait for timeout */
3675 } else if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
3676 auth_transaction == 2) {
3677 sdata_info(sdata, "SAE peer confirmed\n");
3678 ifmgd->auth_data->peer_confirmed = true;
3681 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
3683 drv_mgd_complete_tx(sdata->local, sdata, &info);
3686 #define case_WLAN(type) \
3687 case WLAN_REASON_##type: return #type
3689 const char *ieee80211_get_reason_code_string(u16 reason_code)
3691 switch (reason_code) {
3692 case_WLAN(UNSPECIFIED);
3693 case_WLAN(PREV_AUTH_NOT_VALID);
3694 case_WLAN(DEAUTH_LEAVING);
3695 case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
3696 case_WLAN(DISASSOC_AP_BUSY);
3697 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
3698 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
3699 case_WLAN(DISASSOC_STA_HAS_LEFT);
3700 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
3701 case_WLAN(DISASSOC_BAD_POWER);
3702 case_WLAN(DISASSOC_BAD_SUPP_CHAN);
3703 case_WLAN(INVALID_IE);
3704 case_WLAN(MIC_FAILURE);
3705 case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
3706 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
3707 case_WLAN(IE_DIFFERENT);
3708 case_WLAN(INVALID_GROUP_CIPHER);
3709 case_WLAN(INVALID_PAIRWISE_CIPHER);
3710 case_WLAN(INVALID_AKMP);
3711 case_WLAN(UNSUPP_RSN_VERSION);
3712 case_WLAN(INVALID_RSN_IE_CAP);
3713 case_WLAN(IEEE8021X_FAILED);
3714 case_WLAN(CIPHER_SUITE_REJECTED);
3715 case_WLAN(DISASSOC_UNSPECIFIED_QOS);
3716 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
3717 case_WLAN(DISASSOC_LOW_ACK);
3718 case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
3719 case_WLAN(QSTA_LEAVE_QBSS);
3720 case_WLAN(QSTA_NOT_USE);
3721 case_WLAN(QSTA_REQUIRE_SETUP);
3722 case_WLAN(QSTA_TIMEOUT);
3723 case_WLAN(QSTA_CIPHER_NOT_SUPP);
3724 case_WLAN(MESH_PEER_CANCELED);
3725 case_WLAN(MESH_MAX_PEERS);
3726 case_WLAN(MESH_CONFIG);
3727 case_WLAN(MESH_CLOSE);
3728 case_WLAN(MESH_MAX_RETRIES);
3729 case_WLAN(MESH_CONFIRM_TIMEOUT);
3730 case_WLAN(MESH_INVALID_GTK);
3731 case_WLAN(MESH_INCONSISTENT_PARAM);
3732 case_WLAN(MESH_INVALID_SECURITY);
3733 case_WLAN(MESH_PATH_ERROR);
3734 case_WLAN(MESH_PATH_NOFORWARD);
3735 case_WLAN(MESH_PATH_DEST_UNREACHABLE);
3736 case_WLAN(MAC_EXISTS_IN_MBSS);
3737 case_WLAN(MESH_CHAN_REGULATORY);
3738 case_WLAN(MESH_CHAN);
3739 default: return "<unknown>";
3743 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
3744 struct ieee80211_mgmt *mgmt, size_t len)
3746 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3747 u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
3749 sdata_assert_lock(sdata);
3754 if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
3755 ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
3759 if (ifmgd->associated &&
3760 ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)) {
3761 sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
3762 sdata->vif.cfg.ap_addr, reason_code,
3763 ieee80211_get_reason_code_string(reason_code));
3765 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
3767 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
3768 reason_code, false);
3772 if (ifmgd->assoc_data &&
3773 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->ap_addr)) {
3775 "deauthenticated from %pM while associating (Reason: %u=%s)\n",
3776 ifmgd->assoc_data->ap_addr, reason_code,
3777 ieee80211_get_reason_code_string(reason_code));
3779 ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON);
3781 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
3787 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
3788 struct ieee80211_mgmt *mgmt, size_t len)
3790 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3793 sdata_assert_lock(sdata);
3798 if (!ifmgd->associated ||
3799 !ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr))
3802 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
3804 if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
3805 ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
3809 sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
3810 sdata->vif.cfg.ap_addr, reason_code,
3811 ieee80211_get_reason_code_string(reason_code));
3813 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
3815 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code,
3819 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
3820 u8 *supp_rates, unsigned int supp_rates_len,
3821 u32 *rates, u32 *basic_rates,
3822 bool *have_higher_than_11mbit,
3823 int *min_rate, int *min_rate_index,
3828 for (i = 0; i < supp_rates_len; i++) {
3829 int rate = supp_rates[i] & 0x7f;
3830 bool is_basic = !!(supp_rates[i] & 0x80);
3832 if ((rate * 5 * (1 << shift)) > 110)
3833 *have_higher_than_11mbit = true;
3836 * Skip HT, VHT, HE and SAE H2E only BSS membership selectors
3837 * since they're not rates.
3839 * Note: Even though the membership selector and the basic
3840 * rate flag share the same bit, they are not exactly
3843 if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) ||
3844 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY) ||
3845 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HE_PHY) ||
3846 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_SAE_H2E))
3849 for (j = 0; j < sband->n_bitrates; j++) {
3850 struct ieee80211_rate *br;
3853 br = &sband->bitrates[j];
3855 brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
3856 if (brate == rate) {
3859 *basic_rates |= BIT(j);
3860 if ((rate * 5) < *min_rate) {
3861 *min_rate = rate * 5;
3862 *min_rate_index = j;
3870 static bool ieee80211_twt_req_supported(const struct link_sta_info *link_sta,
3871 const struct ieee802_11_elems *elems)
3873 if (elems->ext_capab_len < 10)
3876 if (!(elems->ext_capab[9] & WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT))
3879 return link_sta->pub->he_cap.he_cap_elem.mac_cap_info[0] &
3880 IEEE80211_HE_MAC_CAP0_TWT_RES;
3883 static int ieee80211_recalc_twt_req(struct ieee80211_link_data *link,
3884 struct link_sta_info *link_sta,
3885 struct ieee802_11_elems *elems)
3887 bool twt = ieee80211_twt_req_supported(link_sta, elems);
3889 if (link->conf->twt_requester != twt) {
3890 link->conf->twt_requester = twt;
3891 return BSS_CHANGED_TWT;
3896 static bool ieee80211_twt_bcast_support(struct ieee80211_sub_if_data *sdata,
3897 struct ieee80211_bss_conf *bss_conf,
3898 struct ieee80211_supported_band *sband,
3899 struct link_sta_info *link_sta)
3901 const struct ieee80211_sta_he_cap *own_he_cap =
3902 ieee80211_get_he_iftype_cap(sband,
3903 ieee80211_vif_type_p2p(&sdata->vif));
3905 return bss_conf->he_support &&
3906 (link_sta->pub->he_cap.he_cap_elem.mac_cap_info[2] &
3907 IEEE80211_HE_MAC_CAP2_BCAST_TWT) &&
3909 (own_he_cap->he_cap_elem.mac_cap_info[2] &
3910 IEEE80211_HE_MAC_CAP2_BCAST_TWT);
3913 static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link,
3914 struct link_sta_info *link_sta,
3915 struct cfg80211_bss *cbss,
3916 struct ieee80211_mgmt *mgmt,
3917 const u8 *elem_start,
3918 unsigned int elem_len,
3921 struct ieee80211_sub_if_data *sdata = link->sdata;
3922 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
3923 struct ieee80211_bss_conf *bss_conf = link->conf;
3924 struct ieee80211_local *local = sdata->local;
3925 struct ieee80211_elems_parse_params parse_params = {
3926 .start = elem_start,
3929 .link_id = link == &sdata->deflink ? -1 : link->link_id,
3932 bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
3933 bool is_s1g = cbss->channel->band == NL80211_BAND_S1GHZ;
3934 const struct cfg80211_bss_ies *bss_ies = NULL;
3935 struct ieee80211_supported_band *sband;
3936 struct ieee802_11_elems *elems;
3940 elems = ieee802_11_parse_elems_full(&parse_params);
3944 /* FIXME: use from STA profile element after parsing that */
3945 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3947 if (!is_s1g && !elems->supp_rates) {
3948 sdata_info(sdata, "no SuppRates element in AssocResp\n");
3953 link->u.mgd.tdls_chan_switch_prohibited =
3954 elems->ext_capab && elems->ext_capab_len >= 5 &&
3955 (elems->ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
3958 * Some APs are erroneously not including some information in their
3959 * (re)association response frames. Try to recover by using the data
3960 * from the beacon or probe response. This seems to afflict mobile
3961 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
3962 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
3965 ((assoc_data->wmm && !elems->wmm_param) ||
3966 (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT) &&
3967 (!elems->ht_cap_elem || !elems->ht_operation)) ||
3968 (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) &&
3969 (!elems->vht_cap_elem || !elems->vht_operation)))) {
3970 const struct cfg80211_bss_ies *ies;
3971 struct ieee802_11_elems *bss_elems;
3974 ies = rcu_dereference(cbss->ies);
3976 bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
3984 parse_params.start = bss_ies->data;
3985 parse_params.len = bss_ies->len;
3986 bss_elems = ieee802_11_parse_elems_full(&parse_params);
3992 if (assoc_data->wmm &&
3993 !elems->wmm_param && bss_elems->wmm_param) {
3994 elems->wmm_param = bss_elems->wmm_param;
3996 "AP bug: WMM param missing from AssocResp\n");
4000 * Also check if we requested HT/VHT, otherwise the AP doesn't
4001 * have to include the IEs in the (re)association response.
4003 if (!elems->ht_cap_elem && bss_elems->ht_cap_elem &&
4004 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)) {
4005 elems->ht_cap_elem = bss_elems->ht_cap_elem;
4007 "AP bug: HT capability missing from AssocResp\n");
4009 if (!elems->ht_operation && bss_elems->ht_operation &&
4010 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)) {
4011 elems->ht_operation = bss_elems->ht_operation;
4013 "AP bug: HT operation missing from AssocResp\n");
4015 if (!elems->vht_cap_elem && bss_elems->vht_cap_elem &&
4016 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) {
4017 elems->vht_cap_elem = bss_elems->vht_cap_elem;
4019 "AP bug: VHT capa missing from AssocResp\n");
4021 if (!elems->vht_operation && bss_elems->vht_operation &&
4022 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) {
4023 elems->vht_operation = bss_elems->vht_operation;
4025 "AP bug: VHT operation missing from AssocResp\n");
4032 * We previously checked these in the beacon/probe response, so
4033 * they should be present here. This is just a safety net.
4035 if (!is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT) &&
4036 (!elems->wmm_param || !elems->ht_cap_elem || !elems->ht_operation)) {
4038 "HT AP is missing WMM params or HT capability/operation\n");
4043 if (!is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) &&
4044 (!elems->vht_cap_elem || !elems->vht_operation)) {
4046 "VHT AP is missing VHT capability/operation\n");
4051 if (is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
4052 !elems->he_6ghz_capa) {
4054 "HE 6 GHz AP is missing HE 6 GHz band capability\n");
4059 sband = ieee80211_get_link_sband(link);
4065 if (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
4066 (!elems->he_cap || !elems->he_operation)) {
4067 mutex_unlock(&sdata->local->sta_mtx);
4069 "HE AP is missing HE capability/operation\n");
4074 /* Set up internal HT/VHT capabilities */
4075 if (elems->ht_cap_elem && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT))
4076 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
4080 if (elems->vht_cap_elem && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT))
4081 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
4082 elems->vht_cap_elem,
4085 if (elems->he_operation && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
4087 ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband,
4090 elems->he_6ghz_capa,
4093 bss_conf->he_support = link_sta->pub->he_cap.has_he;
4094 if (elems->rsnx && elems->rsnx_len &&
4095 (elems->rsnx[0] & WLAN_RSNX_CAPA_PROTECTED_TWT) &&
4096 wiphy_ext_feature_isset(local->hw.wiphy,
4097 NL80211_EXT_FEATURE_PROTECTED_TWT))
4098 bss_conf->twt_protected = true;
4100 bss_conf->twt_protected = false;
4102 *changed |= ieee80211_recalc_twt_req(link, link_sta, elems);
4104 if (elems->eht_operation && elems->eht_cap &&
4105 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT)) {
4106 ieee80211_eht_cap_ie_to_sta_eht_cap(sdata, sband,
4113 bss_conf->eht_support = link_sta->pub->eht_cap.has_eht;
4115 bss_conf->eht_support = false;
4118 bss_conf->he_support = false;
4119 bss_conf->twt_requester = false;
4120 bss_conf->twt_protected = false;
4121 bss_conf->eht_support = false;
4124 bss_conf->twt_broadcast =
4125 ieee80211_twt_bcast_support(sdata, bss_conf, sband, link_sta);
4127 if (bss_conf->he_support) {
4128 bss_conf->he_bss_color.color =
4129 le32_get_bits(elems->he_operation->he_oper_params,
4130 IEEE80211_HE_OPERATION_BSS_COLOR_MASK);
4131 bss_conf->he_bss_color.partial =
4132 le32_get_bits(elems->he_operation->he_oper_params,
4133 IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR);
4134 bss_conf->he_bss_color.enabled =
4135 !le32_get_bits(elems->he_operation->he_oper_params,
4136 IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED);
4138 if (bss_conf->he_bss_color.enabled)
4139 *changed |= BSS_CHANGED_HE_BSS_COLOR;
4141 bss_conf->htc_trig_based_pkt_ext =
4142 le32_get_bits(elems->he_operation->he_oper_params,
4143 IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK);
4144 bss_conf->frame_time_rts_th =
4145 le32_get_bits(elems->he_operation->he_oper_params,
4146 IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
4148 bss_conf->uora_exists = !!elems->uora_element;
4149 if (elems->uora_element)
4150 bss_conf->uora_ocw_range = elems->uora_element[0];
4152 ieee80211_he_op_ie_to_bss_conf(&sdata->vif, elems->he_operation);
4153 ieee80211_he_spr_ie_to_bss_conf(&sdata->vif, elems->he_spr);
4154 /* TODO: OPEN: what happens if BSS color disable is set? */
4157 if (cbss->transmitted_bss) {
4158 bss_conf->nontransmitted = true;
4159 ether_addr_copy(bss_conf->transmitter_bssid,
4160 cbss->transmitted_bss->bssid);
4161 bss_conf->bssid_indicator = cbss->max_bssid_indicator;
4162 bss_conf->bssid_index = cbss->bssid_index;
4166 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
4167 * in their association response, so ignore that data for our own
4168 * configuration. If it changed since the last beacon, we'll get the
4169 * next beacon and update then.
4173 * If an operating mode notification IE is present, override the
4174 * NSS calculation (that would be done in rate_control_rate_init())
4175 * and use the # of streams from that element.
4177 if (elems->opmode_notif &&
4178 !(*elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
4181 nss = *elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
4182 nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
4184 link_sta->pub->rx_nss = nss;
4188 * Always handle WMM once after association regardless
4189 * of the first value the AP uses. Setting -1 here has
4190 * that effect because the AP values is an unsigned
4193 link->u.mgd.wmm_last_param_set = -1;
4194 link->u.mgd.mu_edca_last_param_set = -1;
4196 if (link->u.mgd.disable_wmm_tracking) {
4197 ieee80211_set_wmm_default(link, false, false);
4198 } else if (!ieee80211_sta_wmm_params(local, link, elems->wmm_param,
4199 elems->wmm_param_len,
4200 elems->mu_edca_param_set)) {
4201 /* still enable QoS since we might have HT/VHT */
4202 ieee80211_set_wmm_default(link, false, true);
4203 /* disable WMM tracking in this case to disable
4204 * tracking WMM parameter changes in the beacon if
4205 * the parameters weren't actually valid. Doing so
4206 * avoids changing parameters very strangely when
4207 * the AP is going back and forth between valid and
4208 * invalid parameters.
4210 link->u.mgd.disable_wmm_tracking = true;
4213 if (elems->max_idle_period_ie) {
4214 bss_conf->max_idle_period =
4215 le16_to_cpu(elems->max_idle_period_ie->max_idle_period);
4216 bss_conf->protected_keep_alive =
4217 !!(elems->max_idle_period_ie->idle_options &
4218 WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE);
4219 *changed |= BSS_CHANGED_KEEP_ALIVE;
4221 bss_conf->max_idle_period = 0;
4222 bss_conf->protected_keep_alive = false;
4225 /* set assoc capability (AID was already set earlier),
4226 * ieee80211_set_associated() will tell the driver */
4227 bss_conf->assoc_capability = capab_info;
4236 static int ieee80211_mgd_setup_link_sta(struct ieee80211_link_data *link,
4237 struct sta_info *sta,
4238 struct link_sta_info *link_sta,
4239 struct cfg80211_bss *cbss)
4241 struct ieee80211_sub_if_data *sdata = link->sdata;
4242 struct ieee80211_local *local = sdata->local;
4243 struct ieee80211_bss *bss = (void *)cbss->priv;
4244 u32 rates = 0, basic_rates = 0;
4245 bool have_higher_than_11mbit = false;
4246 int min_rate = INT_MAX, min_rate_index = -1;
4247 /* this is clearly wrong for MLO but we'll just remove it later */
4248 int shift = ieee80211_vif_get_shift(&sdata->vif);
4249 struct ieee80211_supported_band *sband;
4251 memcpy(link_sta->addr, cbss->bssid, ETH_ALEN);
4252 memcpy(link_sta->pub->addr, cbss->bssid, ETH_ALEN);
4254 /* TODO: S1G Basic Rate Set is expressed elsewhere */
4255 if (cbss->channel->band == NL80211_BAND_S1GHZ) {
4256 ieee80211_s1g_sta_rate_init(sta);
4260 sband = local->hw.wiphy->bands[cbss->channel->band];
4262 ieee80211_get_rates(sband, bss->supp_rates, bss->supp_rates_len,
4263 &rates, &basic_rates, &have_higher_than_11mbit,
4264 &min_rate, &min_rate_index, shift);
4267 * This used to be a workaround for basic rates missing
4268 * in the association response frame. Now that we no
4269 * longer use the basic rates from there, it probably
4270 * doesn't happen any more, but keep the workaround so
4271 * in case some *other* APs are buggy in different ways
4272 * we can connect -- with a warning.
4273 * Allow this workaround only in case the AP provided at least
4276 if (min_rate_index < 0) {
4277 link_info(link, "No legacy rates in association response\n");
4279 } else if (!basic_rates) {
4280 link_info(link, "No basic rates, using min rate instead\n");
4281 basic_rates = BIT(min_rate_index);
4285 link_sta->pub->supp_rates[cbss->channel->band] = rates;
4287 link_info(link, "No rates found, keeping mandatory only\n");
4289 link->conf->basic_rates = basic_rates;
4291 /* cf. IEEE 802.11 9.2.12 */
4292 link->operating_11g_mode = sband->band == NL80211_BAND_2GHZ &&
4293 have_higher_than_11mbit;
4298 static u8 ieee80211_max_rx_chains(struct ieee80211_link_data *link,
4299 struct cfg80211_bss *cbss)
4301 struct ieee80211_he_mcs_nss_supp *he_mcs_nss_supp;
4302 const struct element *ht_cap_elem, *vht_cap_elem;
4303 const struct cfg80211_bss_ies *ies;
4304 const struct ieee80211_ht_cap *ht_cap;
4305 const struct ieee80211_vht_cap *vht_cap;
4306 const struct ieee80211_he_cap_elem *he_cap;
4307 const struct element *he_cap_elem;
4308 u16 mcs_80_map, mcs_160_map;
4309 int i, mcs_nss_size;
4313 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)
4316 ht_cap_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_CAPABILITY);
4317 if (ht_cap_elem && ht_cap_elem->datalen >= sizeof(*ht_cap)) {
4318 ht_cap = (void *)ht_cap_elem->data;
4319 chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
4321 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
4322 * "Tx Unequal Modulation Supported" fields.
4326 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)
4329 vht_cap_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY);
4330 if (vht_cap_elem && vht_cap_elem->datalen >= sizeof(*vht_cap)) {
4334 vht_cap = (void *)vht_cap_elem->data;
4335 tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
4336 for (nss = 8; nss > 0; nss--) {
4337 if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
4338 IEEE80211_VHT_MCS_NOT_SUPPORTED)
4341 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
4342 chains = max(chains, nss);
4345 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE)
4348 ies = rcu_dereference(cbss->ies);
4349 he_cap_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_CAPABILITY,
4350 ies->data, ies->len);
4352 if (!he_cap_elem || he_cap_elem->datalen < sizeof(*he_cap))
4355 /* skip one byte ext_tag_id */
4356 he_cap = (void *)(he_cap_elem->data + 1);
4357 mcs_nss_size = ieee80211_he_mcs_nss_size(he_cap);
4360 if (he_cap_elem->datalen < 1 + mcs_nss_size + sizeof(*he_cap))
4363 /* mcs_nss is right after he_cap info */
4364 he_mcs_nss_supp = (void *)(he_cap + 1);
4366 mcs_80_map = le16_to_cpu(he_mcs_nss_supp->tx_mcs_80);
4368 for (i = 7; i >= 0; i--) {
4369 u8 mcs_80 = mcs_80_map >> (2 * i) & 3;
4371 if (mcs_80 != IEEE80211_VHT_MCS_NOT_SUPPORTED) {
4372 chains = max_t(u8, chains, i + 1);
4377 support_160 = he_cap->phy_cap_info[0] &
4378 IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
4383 mcs_160_map = le16_to_cpu(he_mcs_nss_supp->tx_mcs_160);
4384 for (i = 7; i >= 0; i--) {
4385 u8 mcs_160 = mcs_160_map >> (2 * i) & 3;
4387 if (mcs_160 != IEEE80211_VHT_MCS_NOT_SUPPORTED) {
4388 chains = max_t(u8, chains, i + 1);
4397 ieee80211_verify_peer_he_mcs_support(struct ieee80211_sub_if_data *sdata,
4398 const struct cfg80211_bss_ies *ies,
4399 const struct ieee80211_he_operation *he_op)
4401 const struct element *he_cap_elem;
4402 const struct ieee80211_he_cap_elem *he_cap;
4403 struct ieee80211_he_mcs_nss_supp *he_mcs_nss_supp;
4404 u16 mcs_80_map_tx, mcs_80_map_rx;
4409 he_cap_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_CAPABILITY,
4410 ies->data, ies->len);
4413 if (!he_cap_elem || he_cap_elem->datalen < 1 + sizeof(*he_cap)) {
4415 "Invalid HE elem, Disable HE\n");
4419 /* skip one byte ext_tag_id */
4420 he_cap = (void *)(he_cap_elem->data + 1);
4421 mcs_nss_size = ieee80211_he_mcs_nss_size(he_cap);
4424 if (he_cap_elem->datalen < 1 + sizeof(*he_cap) + mcs_nss_size) {
4426 "Invalid HE elem with nss size, Disable HE\n");
4430 /* mcs_nss is right after he_cap info */
4431 he_mcs_nss_supp = (void *)(he_cap + 1);
4433 mcs_80_map_tx = le16_to_cpu(he_mcs_nss_supp->tx_mcs_80);
4434 mcs_80_map_rx = le16_to_cpu(he_mcs_nss_supp->rx_mcs_80);
4436 /* P802.11-REVme/D0.3
4437 * 27.1.1 Introduction to the HE PHY
4439 * An HE STA shall support the following features:
4441 * Single spatial stream HE-MCSs 0 to 7 (transmit and receive) in all
4442 * supported channel widths for HE SU PPDUs
4444 if ((mcs_80_map_tx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4445 (mcs_80_map_rx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED) {
4447 "Missing mandatory rates for 1 Nss, rx 0x%x, tx 0x%x, disable HE\n",
4448 mcs_80_map_tx, mcs_80_map_rx);
4455 ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set);
4458 * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all
4459 * zeroes, which is nonsense, and completely inconsistent with itself
4460 * (it doesn't have 8 streams). Accept the settings in this case anyway.
4462 if (!ap_min_req_set)
4465 /* make sure the AP is consistent with itself
4467 * P802.11-REVme/D0.3
4468 * 26.17.1 Basic HE BSS operation
4470 * A STA that is operating in an HE BSS shall be able to receive and
4471 * transmit at each of the <HE-MCS, NSS> tuple values indicated by the
4472 * Basic HE-MCS And NSS Set field of the HE Operation parameter of the
4473 * MLME-START.request primitive and shall be able to receive at each of
4474 * the <HE-MCS, NSS> tuple values indicated by the Supported HE-MCS and
4475 * NSS Set field in the HE Capabilities parameter of the MLMESTART.request
4478 for (nss = 8; nss > 0; nss--) {
4479 u8 ap_op_val = (ap_min_req_set >> (2 * (nss - 1))) & 3;
4483 if (ap_op_val == IEEE80211_HE_MCS_NOT_SUPPORTED)
4486 ap_rx_val = (mcs_80_map_rx >> (2 * (nss - 1))) & 3;
4487 ap_tx_val = (mcs_80_map_tx >> (2 * (nss - 1))) & 3;
4489 if (ap_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4490 ap_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4491 ap_rx_val < ap_op_val || ap_tx_val < ap_op_val) {
4493 "Invalid rates for %d Nss, rx %d, tx %d oper %d, disable HE\n",
4494 nss, ap_rx_val, ap_rx_val, ap_op_val);
4503 ieee80211_verify_sta_he_mcs_support(struct ieee80211_sub_if_data *sdata,
4504 struct ieee80211_supported_band *sband,
4505 const struct ieee80211_he_operation *he_op)
4507 const struct ieee80211_sta_he_cap *sta_he_cap =
4508 ieee80211_get_he_iftype_cap(sband,
4509 ieee80211_vif_type_p2p(&sdata->vif));
4513 if (!sta_he_cap || !he_op)
4516 ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set);
4519 * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all
4520 * zeroes, which is nonsense, and completely inconsistent with itself
4521 * (it doesn't have 8 streams). Accept the settings in this case anyway.
4523 if (!ap_min_req_set)
4526 /* Need to go over for 80MHz, 160MHz and for 80+80 */
4527 for (i = 0; i < 3; i++) {
4528 const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp =
4529 &sta_he_cap->he_mcs_nss_supp;
4530 u16 sta_mcs_map_rx =
4531 le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]);
4532 u16 sta_mcs_map_tx =
4533 le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]);
4535 bool verified = true;
4538 * For each band there is a maximum of 8 spatial streams
4539 * possible. Each of the sta_mcs_map_* is a 16-bit struct built
4540 * of 2 bits per NSS (1-8), with the values defined in enum
4541 * ieee80211_he_mcs_support. Need to make sure STA TX and RX
4542 * capabilities aren't less than the AP's minimum requirements
4543 * for this HE BSS per SS.
4544 * It is enough to find one such band that meets the reqs.
4546 for (nss = 8; nss > 0; nss--) {
4547 u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3;
4548 u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3;
4549 u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3;
4551 if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED)
4555 * Make sure the HE AP doesn't require MCSs that aren't
4556 * supported by the client as required by spec
4558 * P802.11-REVme/D0.3
4559 * 26.17.1 Basic HE BSS operation
4561 * An HE STA shall not attempt to join * (MLME-JOIN.request primitive)
4562 * a BSS, unless it supports (i.e., is able to both transmit and
4563 * receive using) all of the <HE-MCS, NSS> tuples in the basic
4564 * HE-MCS and NSS set.
4566 if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4567 sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4568 (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) {
4578 /* If here, STA doesn't meet AP's HE min requirements */
4582 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
4583 struct ieee80211_link_data *link,
4584 struct cfg80211_bss *cbss,
4585 ieee80211_conn_flags_t *conn_flags)
4587 struct ieee80211_local *local = sdata->local;
4588 const struct ieee80211_ht_cap *ht_cap = NULL;
4589 const struct ieee80211_ht_operation *ht_oper = NULL;
4590 const struct ieee80211_vht_operation *vht_oper = NULL;
4591 const struct ieee80211_he_operation *he_oper = NULL;
4592 const struct ieee80211_eht_operation *eht_oper = NULL;
4593 const struct ieee80211_s1g_oper_ie *s1g_oper = NULL;
4594 struct ieee80211_supported_band *sband;
4595 struct cfg80211_chan_def chandef;
4596 bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
4597 bool is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ;
4598 struct ieee80211_bss *bss = (void *)cbss->priv;
4599 struct ieee80211_elems_parse_params parse_params = {
4604 struct ieee802_11_elems *elems;
4605 const struct cfg80211_bss_ies *ies;
4612 ies = rcu_dereference(cbss->ies);
4613 parse_params.start = ies->data;
4614 parse_params.len = ies->len;
4615 elems = ieee802_11_parse_elems_full(&parse_params);
4621 sband = local->hw.wiphy->bands[cbss->channel->band];
4623 *conn_flags &= ~(IEEE80211_CONN_DISABLE_40MHZ |
4624 IEEE80211_CONN_DISABLE_80P80MHZ |
4625 IEEE80211_CONN_DISABLE_160MHZ);
4627 /* disable HT/VHT/HE if we don't support them */
4628 if (!sband->ht_cap.ht_supported && !is_6ghz) {
4629 mlme_dbg(sdata, "HT not supported, disabling HT/VHT/HE/EHT\n");
4630 *conn_flags |= IEEE80211_CONN_DISABLE_HT;
4631 *conn_flags |= IEEE80211_CONN_DISABLE_VHT;
4632 *conn_flags |= IEEE80211_CONN_DISABLE_HE;
4633 *conn_flags |= IEEE80211_CONN_DISABLE_EHT;
4636 if (!sband->vht_cap.vht_supported && is_5ghz) {
4637 mlme_dbg(sdata, "VHT not supported, disabling VHT/HE/EHT\n");
4638 *conn_flags |= IEEE80211_CONN_DISABLE_VHT;
4639 *conn_flags |= IEEE80211_CONN_DISABLE_HE;
4640 *conn_flags |= IEEE80211_CONN_DISABLE_EHT;
4643 if (!ieee80211_get_he_iftype_cap(sband,
4644 ieee80211_vif_type_p2p(&sdata->vif))) {
4645 mlme_dbg(sdata, "HE not supported, disabling HE and EHT\n");
4646 *conn_flags |= IEEE80211_CONN_DISABLE_HE;
4647 *conn_flags |= IEEE80211_CONN_DISABLE_EHT;
4650 if (!ieee80211_get_eht_iftype_cap(sband,
4651 ieee80211_vif_type_p2p(&sdata->vif))) {
4652 mlme_dbg(sdata, "EHT not supported, disabling EHT\n");
4653 *conn_flags |= IEEE80211_CONN_DISABLE_EHT;
4656 if (!(*conn_flags & IEEE80211_CONN_DISABLE_HT) && !is_6ghz) {
4657 ht_oper = elems->ht_operation;
4658 ht_cap = elems->ht_cap_elem;
4661 *conn_flags |= IEEE80211_CONN_DISABLE_HT;
4666 if (!(*conn_flags & IEEE80211_CONN_DISABLE_VHT) && !is_6ghz) {
4667 vht_oper = elems->vht_operation;
4668 if (vht_oper && !ht_oper) {
4671 "AP advertised VHT without HT, disabling HT/VHT/HE\n");
4672 *conn_flags |= IEEE80211_CONN_DISABLE_HT;
4673 *conn_flags |= IEEE80211_CONN_DISABLE_VHT;
4674 *conn_flags |= IEEE80211_CONN_DISABLE_HE;
4675 *conn_flags |= IEEE80211_CONN_DISABLE_EHT;
4678 if (!elems->vht_cap_elem) {
4680 "bad VHT capabilities, disabling VHT\n");
4681 *conn_flags |= IEEE80211_CONN_DISABLE_VHT;
4686 if (!(*conn_flags & IEEE80211_CONN_DISABLE_HE)) {
4687 he_oper = elems->he_operation;
4689 if (link && is_6ghz) {
4690 struct ieee80211_bss_conf *bss_conf;
4693 bss_conf = link->conf;
4695 if (elems->pwr_constr_elem)
4696 bss_conf->pwr_reduction = *elems->pwr_constr_elem;
4698 BUILD_BUG_ON(ARRAY_SIZE(bss_conf->tx_pwr_env) !=
4699 ARRAY_SIZE(elems->tx_pwr_env));
4701 for (i = 0; i < elems->tx_pwr_env_num; i++) {
4702 if (elems->tx_pwr_env_len[i] >
4703 sizeof(bss_conf->tx_pwr_env[j]))
4706 bss_conf->tx_pwr_env_num++;
4707 memcpy(&bss_conf->tx_pwr_env[j], elems->tx_pwr_env[i],
4708 elems->tx_pwr_env_len[i]);
4713 if (!ieee80211_verify_peer_he_mcs_support(sdata, ies, he_oper) ||
4714 !ieee80211_verify_sta_he_mcs_support(sdata, sband, he_oper))
4715 *conn_flags |= IEEE80211_CONN_DISABLE_HE |
4716 IEEE80211_CONN_DISABLE_EHT;
4720 * EHT requires HE to be supported as well. Specifically for 6 GHz
4721 * channels, the operation channel information can only be deduced from
4722 * both the 6 GHz operation information (from the HE operation IE) and
4726 (IEEE80211_CONN_DISABLE_HE |
4727 IEEE80211_CONN_DISABLE_EHT)) &&
4729 const struct cfg80211_bss_ies *cbss_ies;
4730 const u8 *eht_oper_ie;
4732 cbss_ies = rcu_dereference(cbss->ies);
4733 eht_oper_ie = cfg80211_find_ext_ie(WLAN_EID_EXT_EHT_OPERATION,
4734 cbss_ies->data, cbss_ies->len);
4735 if (eht_oper_ie && eht_oper_ie[1] >=
4736 1 + sizeof(struct ieee80211_eht_operation))
4737 eht_oper = (void *)(eht_oper_ie + 3);
4742 /* Allow VHT if at least one channel on the sband supports 80 MHz */
4744 for (i = 0; i < sband->n_channels; i++) {
4745 if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
4746 IEEE80211_CHAN_NO_80MHZ))
4754 sdata_info(sdata, "80 MHz not supported, disabling VHT\n");
4755 *conn_flags |= IEEE80211_CONN_DISABLE_VHT;
4758 if (sband->band == NL80211_BAND_S1GHZ) {
4759 s1g_oper = elems->s1g_oper;
4762 "AP missing S1G operation element?\n");
4766 ieee80211_determine_chantype(sdata, link, *conn_flags,
4776 link->needed_rx_chains =
4777 min(ieee80211_max_rx_chains(link, cbss),
4781 /* the element data was RCU protected so no longer valid anyway */
4785 if (*conn_flags & IEEE80211_CONN_DISABLE_HE && is_6ghz) {
4786 sdata_info(sdata, "Rejecting non-HE 6/7 GHz connection");
4793 /* will change later if needed */
4794 link->smps_mode = IEEE80211_SMPS_OFF;
4796 mutex_lock(&local->mtx);
4798 * If this fails (possibly due to channel context sharing
4799 * on incompatible channels, e.g. 80+80 and 160 sharing the
4800 * same control channel) try to use a smaller bandwidth.
4802 ret = ieee80211_link_use_channel(link, &chandef,
4803 IEEE80211_CHANCTX_SHARED);
4805 /* don't downgrade for 5 and 10 MHz channels, though. */
4806 if (chandef.width == NL80211_CHAN_WIDTH_5 ||
4807 chandef.width == NL80211_CHAN_WIDTH_10)
4810 while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
4812 ieee80211_chandef_downgrade(&chandef);
4813 ret = ieee80211_link_use_channel(link, &chandef,
4814 IEEE80211_CHANCTX_SHARED);
4817 mutex_unlock(&local->mtx);
4821 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
4822 struct ieee80211_mgmt *mgmt,
4823 struct ieee802_11_elems *elems,
4824 const u8 *elem_start, unsigned int elem_len)
4826 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4827 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
4828 struct ieee80211_local *local = sdata->local;
4829 unsigned int link_id;
4830 struct sta_info *sta;
4831 u64 changed[IEEE80211_MLD_MAX_NUM_LINKS] = {};
4834 mutex_lock(&sdata->local->sta_mtx);
4836 * station info was already allocated and inserted before
4837 * the association and should be available to us
4839 sta = sta_info_get(sdata, assoc_data->ap_addr);
4843 if (sdata->vif.valid_links) {
4844 u16 valid_links = 0;
4846 for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
4847 if (!assoc_data->link[link_id].bss)
4849 valid_links |= BIT(link_id);
4851 if (link_id != assoc_data->assoc_link_id) {
4852 err = ieee80211_sta_allocate_link(sta, link_id);
4858 ieee80211_vif_set_links(sdata, valid_links);
4861 for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
4862 struct ieee80211_link_data *link;
4863 struct link_sta_info *link_sta;
4865 if (!assoc_data->link[link_id].bss)
4868 link = sdata_dereference(sdata->link[link_id], sdata);
4872 if (sdata->vif.valid_links)
4874 "local address %pM, AP link address %pM\n",
4876 assoc_data->link[link_id].bss->bssid);
4878 link_sta = rcu_dereference_protected(sta->link[link_id],
4879 lockdep_is_held(&local->sta_mtx));
4880 if (WARN_ON(!link_sta))
4883 if (link_id != assoc_data->assoc_link_id) {
4884 err = ieee80211_prep_channel(sdata, link,
4885 assoc_data->link[link_id].bss,
4886 &link->u.mgd.conn_flags);
4891 err = ieee80211_mgd_setup_link_sta(link, sta, link_sta,
4892 assoc_data->link[link_id].bss);
4896 if (!ieee80211_assoc_config_link(link, link_sta,
4897 assoc_data->link[link_id].bss,
4898 mgmt, elem_start, elem_len,
4902 if (link_id != assoc_data->assoc_link_id) {
4903 err = ieee80211_sta_activate_link(sta, link_id);
4909 rate_control_rate_init(sta);
4911 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) {
4912 set_sta_flag(sta, WLAN_STA_MFP);
4913 sta->sta.mfp = true;
4915 sta->sta.mfp = false;
4918 ieee80211_sta_set_max_amsdu_subframes(sta, elems->ext_capab,
4919 elems->ext_capab_len);
4921 sta->sta.wme = (elems->wmm_param || elems->s1g_capab) &&
4922 local->hw.queues >= IEEE80211_NUM_ACS;
4924 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
4925 if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
4926 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
4929 "failed to move station %pM to desired state\n",
4931 WARN_ON(__sta_info_destroy(sta));
4935 if (sdata->wdev.use_4addr)
4936 drv_sta_set_4addr(local, sdata, &sta->sta, true);
4938 mutex_unlock(&sdata->local->sta_mtx);
4940 ieee80211_set_associated(sdata, assoc_data, changed);
4943 * If we're using 4-addr mode, let the AP know that we're
4944 * doing so, so that it can create the STA VLAN on its side
4946 if (ifmgd->use_4addr)
4947 ieee80211_send_4addr_nullfunc(local, sdata);
4950 * Start timer to probe the connection to the AP now.
4951 * Also start the timer that will detect beacon loss.
4953 ieee80211_sta_reset_beacon_monitor(sdata);
4954 ieee80211_sta_reset_conn_monitor(sdata);
4958 eth_zero_addr(sdata->vif.cfg.ap_addr);
4959 mutex_unlock(&sdata->local->sta_mtx);
4963 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
4964 struct ieee80211_mgmt *mgmt,
4967 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4968 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
4969 u16 capab_info, status_code, aid;
4970 struct ieee80211_elems_parse_params parse_params = {
4975 struct ieee802_11_elems *elems;
4977 const u8 *elem_start;
4978 unsigned int elem_len;
4980 struct ieee80211_event event = {
4982 .u.mlme.data = ASSOC_EVENT,
4984 struct ieee80211_prep_tx_info info = {};
4985 struct cfg80211_rx_assoc_resp resp = {
4988 unsigned int link_id;
4990 sdata_assert_lock(sdata);
4995 if (!ether_addr_equal(assoc_data->ap_addr, mgmt->bssid) ||
4996 !ether_addr_equal(assoc_data->ap_addr, mgmt->sa))
5000 * AssocResp and ReassocResp have identical structure, so process both
5001 * of them in this function.
5007 reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control);
5008 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
5009 status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
5010 if (assoc_data->s1g)
5011 elem_start = mgmt->u.s1g_assoc_resp.variable;
5013 elem_start = mgmt->u.assoc_resp.variable;
5016 * Note: this may not be perfect, AP might misbehave - if
5017 * anyone needs to rely on perfect complete notification
5018 * with the exact right subtype, then we need to track what
5019 * we actually transmitted.
5021 info.subtype = reassoc ? IEEE80211_STYPE_REASSOC_REQ :
5022 IEEE80211_STYPE_ASSOC_REQ;
5024 if (assoc_data->fils_kek_len &&
5025 fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0)
5028 elem_len = len - (elem_start - (u8 *)mgmt);
5029 parse_params.start = elem_start;
5030 parse_params.len = elem_len;
5031 elems = ieee802_11_parse_elems_full(&parse_params);
5035 if (elems->aid_resp)
5036 aid = le16_to_cpu(elems->aid_resp->aid);
5037 else if (assoc_data->s1g)
5040 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
5043 * The 5 MSB of the AID field are reserved
5044 * (802.11-2016 9.4.1.8 AID field)
5049 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
5050 reassoc ? "Rea" : "A", assoc_data->ap_addr,
5051 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
5053 ifmgd->broken_ap = false;
5055 if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
5056 elems->timeout_int &&
5057 elems->timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
5060 cfg80211_assoc_comeback(sdata->dev, assoc_data->ap_addr,
5061 le32_to_cpu(elems->timeout_int->value));
5063 tu = le32_to_cpu(elems->timeout_int->value);
5064 ms = tu * 1024 / 1000;
5066 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
5067 assoc_data->ap_addr, tu, ms);
5068 assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
5069 assoc_data->timeout_started = true;
5070 if (ms > IEEE80211_ASSOC_TIMEOUT)
5071 run_again(sdata, assoc_data->timeout);
5075 if (status_code != WLAN_STATUS_SUCCESS) {
5076 sdata_info(sdata, "%pM denied association (code=%d)\n",
5077 assoc_data->ap_addr, status_code);
5078 event.u.mlme.status = MLME_DENIED;
5079 event.u.mlme.reason = status_code;
5080 drv_event_callback(sdata->local, sdata, &event);
5082 if (aid == 0 || aid > IEEE80211_MAX_AID) {
5084 "invalid AID value %d (out of range), turn off PS\n",
5087 ifmgd->broken_ap = true;
5090 if (sdata->vif.valid_links) {
5091 if (!elems->multi_link) {
5093 "MLO association with %pM but no multi-link element in response!\n",
5094 assoc_data->ap_addr);
5098 if (le16_get_bits(elems->multi_link->control,
5099 IEEE80211_ML_CONTROL_TYPE) !=
5100 IEEE80211_ML_CONTROL_TYPE_BASIC) {
5102 "bad multi-link element (control=0x%x)\n",
5103 le16_to_cpu(elems->multi_link->control));
5106 struct ieee80211_mle_basic_common_info *common;
5108 common = (void *)elems->multi_link->variable;
5110 if (memcmp(assoc_data->ap_addr,
5111 common->mld_mac_addr, ETH_ALEN)) {
5113 "AP MLD MAC address mismatch: got %pM expected %pM\n",
5114 common->mld_mac_addr,
5115 assoc_data->ap_addr);
5121 sdata->vif.cfg.aid = aid;
5123 if (!ieee80211_assoc_success(sdata, mgmt, elems,
5124 elem_start, elem_len)) {
5125 /* oops -- internal error -- send timeout for now */
5126 ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT);
5129 event.u.mlme.status = MLME_SUCCESS;
5130 drv_event_callback(sdata->local, sdata, &event);
5131 sdata_info(sdata, "associated\n");
5136 for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
5137 struct ieee80211_link_data *link;
5139 link = sdata_dereference(sdata->link[link_id], sdata);
5142 if (!assoc_data->link[link_id].bss)
5144 resp.links[link_id].bss = assoc_data->link[link_id].bss;
5145 resp.links[link_id].addr = link->conf->addr;
5147 /* get uapsd queues configuration - same for all links */
5148 resp.uapsd_queues = 0;
5149 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
5150 if (link->tx_conf[ac].uapsd)
5151 resp.uapsd_queues |= ieee80211_ac_to_qos_mask[ac];
5154 ieee80211_destroy_assoc_data(sdata,
5155 status_code == WLAN_STATUS_SUCCESS ?
5159 resp.buf = (u8 *)mgmt;
5161 resp.req_ies = ifmgd->assoc_req_ies;
5162 resp.req_ies_len = ifmgd->assoc_req_ies_len;
5163 if (sdata->vif.valid_links)
5164 resp.ap_mld_addr = sdata->vif.cfg.ap_addr;
5165 cfg80211_rx_assoc_resp(sdata->dev, &resp);
5167 drv_mgd_complete_tx(sdata->local, sdata, &info);
5171 ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON);
5175 static void ieee80211_rx_bss_info(struct ieee80211_link_data *link,
5176 struct ieee80211_mgmt *mgmt, size_t len,
5177 struct ieee80211_rx_status *rx_status)
5179 struct ieee80211_sub_if_data *sdata = link->sdata;
5180 struct ieee80211_local *local = sdata->local;
5181 struct ieee80211_bss *bss;
5182 struct ieee80211_channel *channel;
5184 sdata_assert_lock(sdata);
5186 channel = ieee80211_get_channel_khz(local->hw.wiphy,
5187 ieee80211_rx_status_to_khz(rx_status));
5191 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, channel);
5193 link->conf->beacon_rate = bss->beacon_rate;
5194 ieee80211_rx_bss_put(local, bss);
5199 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_link_data *link,
5200 struct sk_buff *skb)
5202 struct ieee80211_sub_if_data *sdata = link->sdata;
5203 struct ieee80211_mgmt *mgmt = (void *)skb->data;
5204 struct ieee80211_if_managed *ifmgd;
5205 struct ieee80211_rx_status *rx_status = (void *) skb->cb;
5206 struct ieee80211_channel *channel;
5207 size_t baselen, len = skb->len;
5209 ifmgd = &sdata->u.mgd;
5211 sdata_assert_lock(sdata);
5214 * According to Draft P802.11ax D6.0 clause 26.17.2.3.2:
5215 * "If a 6 GHz AP receives a Probe Request frame and responds with
5216 * a Probe Response frame [..], the Address 1 field of the Probe
5217 * Response frame shall be set to the broadcast address [..]"
5218 * So, on 6GHz band we should also accept broadcast responses.
5220 channel = ieee80211_get_channel(sdata->local->hw.wiphy,
5225 if (!ether_addr_equal(mgmt->da, sdata->vif.addr) &&
5226 (channel->band != NL80211_BAND_6GHZ ||
5227 !is_broadcast_ether_addr(mgmt->da)))
5228 return; /* ignore ProbeResp to foreign address */
5230 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
5234 ieee80211_rx_bss_info(link, mgmt, len, rx_status);
5236 if (ifmgd->associated &&
5237 ether_addr_equal(mgmt->bssid, link->u.mgd.bssid))
5238 ieee80211_reset_ap_probe(sdata);
5242 * This is the canonical list of information elements we care about,
5243 * the filter code also gives us all changes to the Microsoft OUI
5244 * (00:50:F2) vendor IE which is used for WMM which we need to track,
5245 * as well as the DTPC IE (part of the Cisco OUI) used for signaling
5246 * changes to requested client power.
5248 * We implement beacon filtering in software since that means we can
5249 * avoid processing the frame here and in cfg80211, and userspace
5250 * will not be able to tell whether the hardware supports it or not.
5252 * XXX: This list needs to be dynamic -- userspace needs to be able to
5253 * add items it requires. It also needs to be able to tell us to
5254 * look out for other vendor IEs.
5256 static const u64 care_about_ies =
5257 (1ULL << WLAN_EID_COUNTRY) |
5258 (1ULL << WLAN_EID_ERP_INFO) |
5259 (1ULL << WLAN_EID_CHANNEL_SWITCH) |
5260 (1ULL << WLAN_EID_PWR_CONSTRAINT) |
5261 (1ULL << WLAN_EID_HT_CAPABILITY) |
5262 (1ULL << WLAN_EID_HT_OPERATION) |
5263 (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
5265 static void ieee80211_handle_beacon_sig(struct ieee80211_link_data *link,
5266 struct ieee80211_if_managed *ifmgd,
5267 struct ieee80211_bss_conf *bss_conf,
5268 struct ieee80211_local *local,
5269 struct ieee80211_rx_status *rx_status)
5271 struct ieee80211_sub_if_data *sdata = link->sdata;
5273 /* Track average RSSI from the Beacon frames of the current AP */
5275 if (!link->u.mgd.tracking_signal_avg) {
5276 link->u.mgd.tracking_signal_avg = true;
5277 ewma_beacon_signal_init(&link->u.mgd.ave_beacon_signal);
5278 link->u.mgd.last_cqm_event_signal = 0;
5279 link->u.mgd.count_beacon_signal = 1;
5280 link->u.mgd.last_ave_beacon_signal = 0;
5282 link->u.mgd.count_beacon_signal++;
5285 ewma_beacon_signal_add(&link->u.mgd.ave_beacon_signal,
5286 -rx_status->signal);
5288 if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
5289 link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
5290 int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal);
5291 int last_sig = link->u.mgd.last_ave_beacon_signal;
5292 struct ieee80211_event event = {
5297 * if signal crosses either of the boundaries, invoke callback
5298 * with appropriate parameters
5300 if (sig > ifmgd->rssi_max_thold &&
5301 (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
5302 link->u.mgd.last_ave_beacon_signal = sig;
5303 event.u.rssi.data = RSSI_EVENT_HIGH;
5304 drv_event_callback(local, sdata, &event);
5305 } else if (sig < ifmgd->rssi_min_thold &&
5306 (last_sig >= ifmgd->rssi_max_thold ||
5308 link->u.mgd.last_ave_beacon_signal = sig;
5309 event.u.rssi.data = RSSI_EVENT_LOW;
5310 drv_event_callback(local, sdata, &event);
5314 if (bss_conf->cqm_rssi_thold &&
5315 link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
5316 !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
5317 int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal);
5318 int last_event = link->u.mgd.last_cqm_event_signal;
5319 int thold = bss_conf->cqm_rssi_thold;
5320 int hyst = bss_conf->cqm_rssi_hyst;
5323 (last_event == 0 || sig < last_event - hyst)) {
5324 link->u.mgd.last_cqm_event_signal = sig;
5325 ieee80211_cqm_rssi_notify(
5327 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
5329 } else if (sig > thold &&
5330 (last_event == 0 || sig > last_event + hyst)) {
5331 link->u.mgd.last_cqm_event_signal = sig;
5332 ieee80211_cqm_rssi_notify(
5334 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
5339 if (bss_conf->cqm_rssi_low &&
5340 link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
5341 int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal);
5342 int last_event = link->u.mgd.last_cqm_event_signal;
5343 int low = bss_conf->cqm_rssi_low;
5344 int high = bss_conf->cqm_rssi_high;
5347 (last_event == 0 || last_event >= low)) {
5348 link->u.mgd.last_cqm_event_signal = sig;
5349 ieee80211_cqm_rssi_notify(
5351 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
5353 } else if (sig > high &&
5354 (last_event == 0 || last_event <= high)) {
5355 link->u.mgd.last_cqm_event_signal = sig;
5356 ieee80211_cqm_rssi_notify(
5358 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
5364 static bool ieee80211_rx_our_beacon(const u8 *tx_bssid,
5365 struct cfg80211_bss *bss)
5367 if (ether_addr_equal(tx_bssid, bss->bssid))
5369 if (!bss->transmitted_bss)
5371 return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid);
5374 static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link,
5375 struct ieee80211_hdr *hdr, size_t len,
5376 struct ieee80211_rx_status *rx_status)
5378 struct ieee80211_sub_if_data *sdata = link->sdata;
5379 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5380 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
5381 struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg;
5382 struct ieee80211_mgmt *mgmt = (void *) hdr;
5384 struct ieee802_11_elems *elems;
5385 struct ieee80211_local *local = sdata->local;
5386 struct ieee80211_chanctx_conf *chanctx_conf;
5387 struct ieee80211_channel *chan;
5388 struct link_sta_info *link_sta;
5389 struct sta_info *sta;
5394 u8 *bssid, *variable = mgmt->u.beacon.variable;
5395 u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
5396 struct ieee80211_elems_parse_params parse_params = {
5401 sdata_assert_lock(sdata);
5403 /* Process beacon from the current BSS */
5404 bssid = ieee80211_get_bssid(hdr, len, sdata->vif.type);
5405 if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
5406 struct ieee80211_ext *ext = (void *) mgmt;
5408 if (ieee80211_is_s1g_short_beacon(ext->frame_control))
5409 variable = ext->u.s1g_short_beacon.variable;
5411 variable = ext->u.s1g_beacon.variable;
5414 baselen = (u8 *) variable - (u8 *) mgmt;
5418 parse_params.start = variable;
5419 parse_params.len = len - baselen;
5422 chanctx_conf = rcu_dereference(link->conf->chanctx_conf);
5423 if (!chanctx_conf) {
5428 if (ieee80211_rx_status_to_khz(rx_status) !=
5429 ieee80211_channel_to_khz(chanctx_conf->def.chan)) {
5433 chan = chanctx_conf->def.chan;
5436 if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
5437 !WARN_ON(sdata->vif.valid_links) &&
5438 ieee80211_rx_our_beacon(bssid, ifmgd->assoc_data->link[0].bss)) {
5439 parse_params.bss = ifmgd->assoc_data->link[0].bss;
5440 elems = ieee802_11_parse_elems_full(&parse_params);
5444 ieee80211_rx_bss_info(link, mgmt, len, rx_status);
5446 if (elems->dtim_period)
5447 link->u.mgd.dtim_period = elems->dtim_period;
5448 link->u.mgd.have_beacon = true;
5449 ifmgd->assoc_data->need_beacon = false;
5450 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
5451 link->conf->sync_tsf =
5452 le64_to_cpu(mgmt->u.beacon.timestamp);
5453 link->conf->sync_device_ts =
5454 rx_status->device_timestamp;
5455 link->conf->sync_dtim_count = elems->dtim_count;
5458 if (elems->mbssid_config_ie)
5459 bss_conf->profile_periodicity =
5460 elems->mbssid_config_ie->profile_periodicity;
5462 bss_conf->profile_periodicity = 0;
5464 if (elems->ext_capab_len >= 11 &&
5465 (elems->ext_capab[10] & WLAN_EXT_CAPA11_EMA_SUPPORT))
5466 bss_conf->ema_ap = true;
5468 bss_conf->ema_ap = false;
5470 /* continue assoc process */
5471 ifmgd->assoc_data->timeout = jiffies;
5472 ifmgd->assoc_data->timeout_started = true;
5473 run_again(sdata, ifmgd->assoc_data->timeout);
5478 if (!ifmgd->associated ||
5479 !ieee80211_rx_our_beacon(bssid, link->u.mgd.bss))
5481 bssid = link->u.mgd.bssid;
5483 if (!(rx_status->flag & RX_FLAG_NO_SIGNAL_VAL))
5484 ieee80211_handle_beacon_sig(link, ifmgd, bss_conf,
5487 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
5488 mlme_dbg_ratelimited(sdata,
5489 "cancelling AP probe due to a received beacon\n");
5490 ieee80211_reset_ap_probe(sdata);
5494 * Push the beacon loss detection into the future since
5495 * we are processing a beacon from the AP just now.
5497 ieee80211_sta_reset_beacon_monitor(sdata);
5499 /* TODO: CRC urrently not calculated on S1G Beacon Compatibility
5500 * element (which carries the beacon interval). Don't forget to add a
5501 * bit to care_about_ies[] above if mac80211 is interested in a
5502 * changing S1G element.
5504 if (!ieee80211_is_s1g_beacon(hdr->frame_control))
5505 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
5506 parse_params.bss = link->u.mgd.bss;
5507 parse_params.filter = care_about_ies;
5508 parse_params.crc = ncrc;
5509 elems = ieee802_11_parse_elems_full(&parse_params);
5514 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
5515 ieee80211_check_tim(elems->tim, elems->tim_len, vif_cfg->aid)) {
5516 if (local->hw.conf.dynamic_ps_timeout > 0) {
5517 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
5518 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
5519 ieee80211_hw_config(local,
5520 IEEE80211_CONF_CHANGE_PS);
5522 ieee80211_send_nullfunc(local, sdata, false);
5523 } else if (!local->pspolling && sdata->u.mgd.powersave) {
5524 local->pspolling = true;
5527 * Here is assumed that the driver will be
5528 * able to send ps-poll frame and receive a
5529 * response even though power save mode is
5530 * enabled, but some drivers might require
5531 * to disable power save here. This needs
5532 * to be investigated.
5534 ieee80211_send_pspoll(local, sdata);
5538 if (sdata->vif.p2p ||
5539 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
5540 struct ieee80211_p2p_noa_attr noa = {};
5543 ret = cfg80211_get_p2p_attr(variable,
5545 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
5546 (u8 *) &noa, sizeof(noa));
5548 if (link->u.mgd.p2p_noa_index != noa.index) {
5549 /* valid noa_attr and index changed */
5550 link->u.mgd.p2p_noa_index = noa.index;
5551 memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
5552 changed |= BSS_CHANGED_P2P_PS;
5554 * make sure we update all information, the CRC
5555 * mechanism doesn't look at P2P attributes.
5557 link->u.mgd.beacon_crc_valid = false;
5559 } else if (link->u.mgd.p2p_noa_index != -1) {
5560 /* noa_attr not found and we had valid noa_attr before */
5561 link->u.mgd.p2p_noa_index = -1;
5562 memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
5563 changed |= BSS_CHANGED_P2P_PS;
5564 link->u.mgd.beacon_crc_valid = false;
5568 if (link->u.mgd.csa_waiting_bcn)
5569 ieee80211_chswitch_post_beacon(link);
5572 * Update beacon timing and dtim count on every beacon appearance. This
5573 * will allow the driver to use the most updated values. Do it before
5574 * comparing this one with last received beacon.
5575 * IMPORTANT: These parameters would possibly be out of sync by the time
5576 * the driver will use them. The synchronized view is currently
5577 * guaranteed only in certain callbacks.
5579 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY) &&
5580 !ieee80211_is_s1g_beacon(hdr->frame_control)) {
5581 link->conf->sync_tsf =
5582 le64_to_cpu(mgmt->u.beacon.timestamp);
5583 link->conf->sync_device_ts =
5584 rx_status->device_timestamp;
5585 link->conf->sync_dtim_count = elems->dtim_count;
5588 if ((ncrc == link->u.mgd.beacon_crc && link->u.mgd.beacon_crc_valid) ||
5589 ieee80211_is_s1g_short_beacon(mgmt->frame_control))
5591 link->u.mgd.beacon_crc = ncrc;
5592 link->u.mgd.beacon_crc_valid = true;
5594 ieee80211_rx_bss_info(link, mgmt, len, rx_status);
5596 ieee80211_sta_process_chanswitch(link, rx_status->mactime,
5597 rx_status->device_timestamp,
5600 if (!link->u.mgd.disable_wmm_tracking &&
5601 ieee80211_sta_wmm_params(local, link, elems->wmm_param,
5602 elems->wmm_param_len,
5603 elems->mu_edca_param_set))
5604 changed |= BSS_CHANGED_QOS;
5607 * If we haven't had a beacon before, tell the driver about the
5608 * DTIM period (and beacon timing if desired) now.
5610 if (!link->u.mgd.have_beacon) {
5611 /* a few bogus AP send dtim_period = 0 or no TIM IE */
5612 bss_conf->dtim_period = elems->dtim_period ?: 1;
5614 changed |= BSS_CHANGED_BEACON_INFO;
5615 link->u.mgd.have_beacon = true;
5617 mutex_lock(&local->iflist_mtx);
5618 ieee80211_recalc_ps(local);
5619 mutex_unlock(&local->iflist_mtx);
5621 ieee80211_recalc_ps_vif(sdata);
5624 if (elems->erp_info) {
5626 erp_value = elems->erp_info[0];
5631 if (!ieee80211_is_s1g_beacon(hdr->frame_control))
5632 changed |= ieee80211_handle_bss_capability(link,
5633 le16_to_cpu(mgmt->u.beacon.capab_info),
5634 erp_valid, erp_value);
5636 mutex_lock(&local->sta_mtx);
5637 sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr);
5640 link_sta = rcu_dereference_protected(sta->link[link->link_id],
5641 lockdep_is_held(&local->sta_mtx));
5642 if (WARN_ON(!link_sta))
5645 changed |= ieee80211_recalc_twt_req(link, link_sta, elems);
5647 if (ieee80211_config_bw(link, elems->ht_cap_elem,
5648 elems->vht_cap_elem, elems->ht_operation,
5649 elems->vht_operation, elems->he_operation,
5650 elems->eht_operation,
5651 elems->s1g_oper, bssid, &changed)) {
5652 mutex_unlock(&local->sta_mtx);
5654 "failed to follow AP %pM bandwidth change, disconnect\n",
5656 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
5657 WLAN_REASON_DEAUTH_LEAVING,
5659 ieee80211_report_disconnect(sdata, deauth_buf,
5660 sizeof(deauth_buf), true,
5661 WLAN_REASON_DEAUTH_LEAVING,
5666 if (sta && elems->opmode_notif)
5667 ieee80211_vht_handle_opmode(sdata, link_sta,
5668 *elems->opmode_notif,
5670 mutex_unlock(&local->sta_mtx);
5672 changed |= ieee80211_handle_pwr_constr(link, chan, mgmt,
5673 elems->country_elem,
5674 elems->country_elem_len,
5675 elems->pwr_constr_elem,
5676 elems->cisco_dtpc_elem);
5678 ieee80211_link_info_change_notify(sdata, link, changed);
5683 void ieee80211_sta_rx_queued_ext(struct ieee80211_sub_if_data *sdata,
5684 struct sk_buff *skb)
5686 struct ieee80211_link_data *link = &sdata->deflink;
5687 struct ieee80211_rx_status *rx_status;
5688 struct ieee80211_hdr *hdr;
5691 rx_status = (struct ieee80211_rx_status *) skb->cb;
5692 hdr = (struct ieee80211_hdr *) skb->data;
5693 fc = le16_to_cpu(hdr->frame_control);
5696 switch (fc & IEEE80211_FCTL_STYPE) {
5697 case IEEE80211_STYPE_S1G_BEACON:
5698 ieee80211_rx_mgmt_beacon(link, hdr, skb->len, rx_status);
5701 sdata_unlock(sdata);
5704 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
5705 struct sk_buff *skb)
5707 struct ieee80211_link_data *link = &sdata->deflink;
5708 struct ieee80211_rx_status *rx_status;
5709 struct ieee80211_mgmt *mgmt;
5713 rx_status = (struct ieee80211_rx_status *) skb->cb;
5714 mgmt = (struct ieee80211_mgmt *) skb->data;
5715 fc = le16_to_cpu(mgmt->frame_control);
5719 if (rx_status->link_valid) {
5720 link = sdata_dereference(sdata->link[rx_status->link_id],
5726 switch (fc & IEEE80211_FCTL_STYPE) {
5727 case IEEE80211_STYPE_BEACON:
5728 ieee80211_rx_mgmt_beacon(link, (void *)mgmt,
5729 skb->len, rx_status);
5731 case IEEE80211_STYPE_PROBE_RESP:
5732 ieee80211_rx_mgmt_probe_resp(link, skb);
5734 case IEEE80211_STYPE_AUTH:
5735 ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
5737 case IEEE80211_STYPE_DEAUTH:
5738 ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
5740 case IEEE80211_STYPE_DISASSOC:
5741 ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
5743 case IEEE80211_STYPE_ASSOC_RESP:
5744 case IEEE80211_STYPE_REASSOC_RESP:
5745 ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
5747 case IEEE80211_STYPE_ACTION:
5748 if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
5749 struct ieee802_11_elems *elems;
5751 ies_len = skb->len -
5752 offsetof(struct ieee80211_mgmt,
5753 u.action.u.chan_switch.variable);
5758 /* CSA IE cannot be overridden, no need for BSSID */
5759 elems = ieee802_11_parse_elems(
5760 mgmt->u.action.u.chan_switch.variable,
5761 ies_len, true, NULL);
5763 if (elems && !elems->parse_error)
5764 ieee80211_sta_process_chanswitch(link,
5766 rx_status->device_timestamp,
5769 } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
5770 struct ieee802_11_elems *elems;
5772 ies_len = skb->len -
5773 offsetof(struct ieee80211_mgmt,
5774 u.action.u.ext_chan_switch.variable);
5780 * extended CSA IE can't be overridden, no need for
5783 elems = ieee802_11_parse_elems(
5784 mgmt->u.action.u.ext_chan_switch.variable,
5785 ies_len, true, NULL);
5787 if (elems && !elems->parse_error) {
5788 /* for the handling code pretend it was an IE */
5789 elems->ext_chansw_ie =
5790 &mgmt->u.action.u.ext_chan_switch.data;
5792 ieee80211_sta_process_chanswitch(link,
5794 rx_status->device_timestamp,
5803 sdata_unlock(sdata);
5806 static void ieee80211_sta_timer(struct timer_list *t)
5808 struct ieee80211_sub_if_data *sdata =
5809 from_timer(sdata, t, u.mgd.timer);
5811 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
5814 void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
5817 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5819 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
5822 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
5826 static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
5828 struct ieee80211_local *local = sdata->local;
5829 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5830 struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
5834 struct ieee80211_prep_tx_info info = {
5835 .subtype = IEEE80211_STYPE_AUTH,
5838 sdata_assert_lock(sdata);
5840 if (WARN_ON_ONCE(!auth_data))
5845 if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
5846 sdata_info(sdata, "authentication with %pM timed out\n",
5847 auth_data->ap_addr);
5850 * Most likely AP is not in the range so remove the
5851 * bss struct for that AP.
5853 cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
5858 if (auth_data->algorithm == WLAN_AUTH_SAE)
5859 info.duration = jiffies_to_msecs(IEEE80211_AUTH_TIMEOUT_SAE);
5861 drv_mgd_prepare_tx(local, sdata, &info);
5863 sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
5864 auth_data->ap_addr, auth_data->tries,
5865 IEEE80211_AUTH_MAX_TRIES);
5867 auth_data->expected_transaction = 2;
5869 if (auth_data->algorithm == WLAN_AUTH_SAE) {
5870 trans = auth_data->sae_trans;
5871 status = auth_data->sae_status;
5872 auth_data->expected_transaction = trans;
5875 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
5876 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
5877 IEEE80211_TX_INTFL_MLME_CONN_TX;
5879 ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
5880 auth_data->data, auth_data->data_len,
5881 auth_data->ap_addr, auth_data->ap_addr,
5882 NULL, 0, 0, tx_flags);
5884 if (tx_flags == 0) {
5885 if (auth_data->algorithm == WLAN_AUTH_SAE)
5886 auth_data->timeout = jiffies +
5887 IEEE80211_AUTH_TIMEOUT_SAE;
5889 auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
5891 auth_data->timeout =
5892 round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
5895 auth_data->timeout_started = true;
5896 run_again(sdata, auth_data->timeout);
5901 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
5903 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
5904 struct ieee80211_local *local = sdata->local;
5907 sdata_assert_lock(sdata);
5909 assoc_data->tries++;
5910 if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
5911 sdata_info(sdata, "association with %pM timed out\n",
5912 assoc_data->ap_addr);
5915 * Most likely AP is not in the range so remove the
5916 * bss struct for that AP.
5918 cfg80211_unlink_bss(local->hw.wiphy,
5919 assoc_data->link[assoc_data->assoc_link_id].bss);
5924 sdata_info(sdata, "associate with %pM (try %d/%d)\n",
5925 assoc_data->ap_addr, assoc_data->tries,
5926 IEEE80211_ASSOC_MAX_TRIES);
5927 ret = ieee80211_send_assoc(sdata);
5931 if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
5932 assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
5933 assoc_data->timeout_started = true;
5934 run_again(sdata, assoc_data->timeout);
5936 assoc_data->timeout =
5937 round_jiffies_up(jiffies +
5938 IEEE80211_ASSOC_TIMEOUT_LONG);
5939 assoc_data->timeout_started = true;
5940 run_again(sdata, assoc_data->timeout);
5946 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
5947 __le16 fc, bool acked)
5949 struct ieee80211_local *local = sdata->local;
5951 sdata->u.mgd.status_fc = fc;
5952 sdata->u.mgd.status_acked = acked;
5953 sdata->u.mgd.status_received = true;
5955 ieee80211_queue_work(&local->hw, &sdata->work);
5958 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
5960 struct ieee80211_local *local = sdata->local;
5961 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5965 if (ifmgd->status_received) {
5966 __le16 fc = ifmgd->status_fc;
5967 bool status_acked = ifmgd->status_acked;
5969 ifmgd->status_received = false;
5970 if (ifmgd->auth_data && ieee80211_is_auth(fc)) {
5972 if (ifmgd->auth_data->algorithm ==
5974 ifmgd->auth_data->timeout =
5976 IEEE80211_AUTH_TIMEOUT_SAE;
5978 ifmgd->auth_data->timeout =
5980 IEEE80211_AUTH_TIMEOUT_SHORT;
5981 run_again(sdata, ifmgd->auth_data->timeout);
5983 ifmgd->auth_data->timeout = jiffies - 1;
5985 ifmgd->auth_data->timeout_started = true;
5986 } else if (ifmgd->assoc_data &&
5987 (ieee80211_is_assoc_req(fc) ||
5988 ieee80211_is_reassoc_req(fc))) {
5990 ifmgd->assoc_data->timeout =
5991 jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
5992 run_again(sdata, ifmgd->assoc_data->timeout);
5994 ifmgd->assoc_data->timeout = jiffies - 1;
5996 ifmgd->assoc_data->timeout_started = true;
6000 if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
6001 time_after(jiffies, ifmgd->auth_data->timeout)) {
6002 if (ifmgd->auth_data->done || ifmgd->auth_data->waiting) {
6004 * ok ... we waited for assoc or continuation but
6005 * userspace didn't do it, so kill the auth data
6007 ieee80211_destroy_auth_data(sdata, false);
6008 } else if (ieee80211_auth(sdata)) {
6009 u8 ap_addr[ETH_ALEN];
6010 struct ieee80211_event event = {
6012 .u.mlme.data = AUTH_EVENT,
6013 .u.mlme.status = MLME_TIMEOUT,
6016 memcpy(ap_addr, ifmgd->auth_data->ap_addr, ETH_ALEN);
6018 ieee80211_destroy_auth_data(sdata, false);
6020 cfg80211_auth_timeout(sdata->dev, ap_addr);
6021 drv_event_callback(sdata->local, sdata, &event);
6023 } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
6024 run_again(sdata, ifmgd->auth_data->timeout);
6026 if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
6027 time_after(jiffies, ifmgd->assoc_data->timeout)) {
6028 if ((ifmgd->assoc_data->need_beacon &&
6029 !sdata->deflink.u.mgd.have_beacon) ||
6030 ieee80211_do_assoc(sdata)) {
6031 struct ieee80211_event event = {
6033 .u.mlme.data = ASSOC_EVENT,
6034 .u.mlme.status = MLME_TIMEOUT,
6037 ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT);
6038 drv_event_callback(sdata->local, sdata, &event);
6040 } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
6041 run_again(sdata, ifmgd->assoc_data->timeout);
6043 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
6044 ifmgd->associated) {
6045 u8 *bssid = sdata->deflink.u.mgd.bssid;
6048 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
6049 max_tries = max_nullfunc_tries;
6051 max_tries = max_probe_tries;
6053 /* ACK received for nullfunc probing frame */
6054 if (!ifmgd->probe_send_count)
6055 ieee80211_reset_ap_probe(sdata);
6056 else if (ifmgd->nullfunc_failed) {
6057 if (ifmgd->probe_send_count < max_tries) {
6059 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
6060 bssid, ifmgd->probe_send_count,
6062 ieee80211_mgd_probe_ap_send(sdata);
6065 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
6067 ieee80211_sta_connection_lost(sdata,
6068 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
6071 } else if (time_is_after_jiffies(ifmgd->probe_timeout))
6072 run_again(sdata, ifmgd->probe_timeout);
6073 else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
6075 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
6076 bssid, probe_wait_ms);
6077 ieee80211_sta_connection_lost(sdata,
6078 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
6079 } else if (ifmgd->probe_send_count < max_tries) {
6081 "No probe response from AP %pM after %dms, try %d/%i\n",
6082 bssid, probe_wait_ms,
6083 ifmgd->probe_send_count, max_tries);
6084 ieee80211_mgd_probe_ap_send(sdata);
6087 * We actually lost the connection ... or did we?
6091 "No probe response from AP %pM after %dms, disconnecting.\n",
6092 bssid, probe_wait_ms);
6094 ieee80211_sta_connection_lost(sdata,
6095 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
6099 sdata_unlock(sdata);
6102 static void ieee80211_sta_bcn_mon_timer(struct timer_list *t)
6104 struct ieee80211_sub_if_data *sdata =
6105 from_timer(sdata, t, u.mgd.bcn_mon_timer);
6107 if (WARN_ON(sdata->vif.valid_links))
6110 if (sdata->vif.bss_conf.csa_active &&
6111 !sdata->deflink.u.mgd.csa_waiting_bcn)
6114 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
6117 sdata->u.mgd.connection_loss = false;
6118 ieee80211_queue_work(&sdata->local->hw,
6119 &sdata->u.mgd.beacon_connection_loss_work);
6122 static void ieee80211_sta_conn_mon_timer(struct timer_list *t)
6124 struct ieee80211_sub_if_data *sdata =
6125 from_timer(sdata, t, u.mgd.conn_mon_timer);
6126 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6127 struct ieee80211_local *local = sdata->local;
6128 struct sta_info *sta;
6129 unsigned long timeout;
6131 if (WARN_ON(sdata->vif.valid_links))
6134 if (sdata->vif.bss_conf.csa_active &&
6135 !sdata->deflink.u.mgd.csa_waiting_bcn)
6138 sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr);
6142 timeout = sta->deflink.status_stats.last_ack;
6143 if (time_before(sta->deflink.status_stats.last_ack, sta->deflink.rx_stats.last_rx))
6144 timeout = sta->deflink.rx_stats.last_rx;
6145 timeout += IEEE80211_CONNECTION_IDLE_TIME;
6147 /* If timeout is after now, then update timer to fire at
6148 * the later date, but do not actually probe at this time.
6150 if (time_is_after_jiffies(timeout)) {
6151 mod_timer(&ifmgd->conn_mon_timer, round_jiffies_up(timeout));
6155 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
6158 static void ieee80211_sta_monitor_work(struct work_struct *work)
6160 struct ieee80211_sub_if_data *sdata =
6161 container_of(work, struct ieee80211_sub_if_data,
6162 u.mgd.monitor_work);
6164 ieee80211_mgd_probe_ap(sdata, false);
6167 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
6169 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
6170 __ieee80211_stop_poll(sdata);
6172 /* let's probe the connection once */
6173 if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
6174 ieee80211_queue_work(&sdata->local->hw,
6175 &sdata->u.mgd.monitor_work);
6180 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
6182 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6183 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
6187 if (ifmgd->auth_data || ifmgd->assoc_data) {
6188 const u8 *ap_addr = ifmgd->auth_data ?
6189 ifmgd->auth_data->ap_addr :
6190 ifmgd->assoc_data->ap_addr;
6193 * If we are trying to authenticate / associate while suspending,
6194 * cfg80211 won't know and won't actually abort those attempts,
6195 * thus we need to do that ourselves.
6197 ieee80211_send_deauth_disassoc(sdata, ap_addr, ap_addr,
6198 IEEE80211_STYPE_DEAUTH,
6199 WLAN_REASON_DEAUTH_LEAVING,
6201 if (ifmgd->assoc_data)
6202 ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON);
6203 if (ifmgd->auth_data)
6204 ieee80211_destroy_auth_data(sdata, false);
6205 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
6206 IEEE80211_DEAUTH_FRAME_LEN,
6210 /* This is a bit of a hack - we should find a better and more generic
6211 * solution to this. Normally when suspending, cfg80211 will in fact
6212 * deauthenticate. However, it doesn't (and cannot) stop an ongoing
6213 * auth (not so important) or assoc (this is the problem) process.
6215 * As a consequence, it can happen that we are in the process of both
6216 * associating and suspending, and receive an association response
6217 * after cfg80211 has checked if it needs to disconnect, but before
6218 * we actually set the flag to drop incoming frames. This will then
6219 * cause the workqueue flush to process the association response in
6220 * the suspend, resulting in a successful association just before it
6221 * tries to remove the interface from the driver, which now though
6222 * has a channel context assigned ... this results in issues.
6224 * To work around this (for now) simply deauth here again if we're
6227 if (ifmgd->associated && !sdata->local->wowlan) {
6229 struct cfg80211_deauth_request req = {
6230 .reason_code = WLAN_REASON_DEAUTH_LEAVING,
6234 memcpy(bssid, sdata->vif.cfg.ap_addr, ETH_ALEN);
6235 ieee80211_mgd_deauth(sdata, &req);
6238 sdata_unlock(sdata);
6242 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
6244 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6247 if (!ifmgd->associated) {
6248 sdata_unlock(sdata);
6252 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
6253 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
6254 mlme_dbg(sdata, "driver requested disconnect after resume\n");
6255 ieee80211_sta_connection_lost(sdata,
6256 WLAN_REASON_UNSPECIFIED,
6258 sdata_unlock(sdata);
6262 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_HW_RESTART) {
6263 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_HW_RESTART;
6264 mlme_dbg(sdata, "driver requested disconnect after hardware restart\n");
6265 ieee80211_sta_connection_lost(sdata,
6266 WLAN_REASON_UNSPECIFIED,
6268 sdata_unlock(sdata);
6272 sdata_unlock(sdata);
6275 static void ieee80211_request_smps_mgd_work(struct work_struct *work)
6277 struct ieee80211_link_data *link =
6278 container_of(work, struct ieee80211_link_data,
6279 u.mgd.request_smps_work);
6281 sdata_lock(link->sdata);
6282 __ieee80211_request_smps_mgd(link->sdata, link,
6283 link->u.mgd.driver_smps_mode);
6284 sdata_unlock(link->sdata);
6287 /* interface setup */
6288 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
6290 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6292 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
6293 INIT_WORK(&ifmgd->beacon_connection_loss_work,
6294 ieee80211_beacon_connection_loss_work);
6295 INIT_WORK(&ifmgd->csa_connection_drop_work,
6296 ieee80211_csa_connection_drop_work);
6297 INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
6298 ieee80211_tdls_peer_del_work);
6299 timer_setup(&ifmgd->timer, ieee80211_sta_timer, 0);
6300 timer_setup(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, 0);
6301 timer_setup(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, 0);
6302 INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk,
6303 ieee80211_sta_handle_tspec_ac_params_wk);
6306 ifmgd->powersave = sdata->wdev.ps;
6307 ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
6308 ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
6309 /* Setup TDLS data */
6310 spin_lock_init(&ifmgd->teardown_lock);
6311 ifmgd->teardown_skb = NULL;
6312 ifmgd->orig_teardown_skb = NULL;
6315 void ieee80211_mgd_setup_link(struct ieee80211_link_data *link)
6317 struct ieee80211_sub_if_data *sdata = link->sdata;
6318 struct ieee80211_local *local = sdata->local;
6319 unsigned int link_id = link->link_id;
6321 link->u.mgd.p2p_noa_index = -1;
6322 link->u.mgd.conn_flags = 0;
6323 link->conf->bssid = link->u.mgd.bssid;
6325 INIT_WORK(&link->u.mgd.request_smps_work,
6326 ieee80211_request_smps_mgd_work);
6327 if (local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
6328 link->u.mgd.req_smps = IEEE80211_SMPS_AUTOMATIC;
6330 link->u.mgd.req_smps = IEEE80211_SMPS_OFF;
6332 INIT_WORK(&link->u.mgd.chswitch_work, ieee80211_chswitch_work);
6333 timer_setup(&link->u.mgd.chswitch_timer, ieee80211_chswitch_timer, 0);
6335 if (sdata->u.mgd.assoc_data)
6336 ether_addr_copy(link->conf->addr,
6337 sdata->u.mgd.assoc_data->link[link_id].addr);
6338 else if (!is_valid_ether_addr(link->conf->addr))
6339 eth_random_addr(link->conf->addr);
6342 /* scan finished notification */
6343 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
6345 struct ieee80211_sub_if_data *sdata;
6347 /* Restart STA timers */
6349 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
6350 if (ieee80211_sdata_running(sdata))
6351 ieee80211_restart_sta_timer(sdata);
6356 static bool ieee80211_get_dtim(const struct cfg80211_bss_ies *ies,
6357 u8 *dtim_count, u8 *dtim_period)
6359 const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len);
6360 const u8 *idx_ie = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, ies->data,
6362 const struct ieee80211_tim_ie *tim = NULL;
6363 const struct ieee80211_bssid_index *idx;
6364 bool valid = tim_ie && tim_ie[1] >= 2;
6367 tim = (void *)(tim_ie + 2);
6370 *dtim_count = valid ? tim->dtim_count : 0;
6373 *dtim_period = valid ? tim->dtim_period : 0;
6375 /* Check if value is overridden by non-transmitted profile */
6376 if (!idx_ie || idx_ie[1] < 3)
6379 idx = (void *)(idx_ie + 2);
6382 *dtim_count = idx->dtim_count;
6385 *dtim_period = idx->dtim_period;
6390 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
6391 struct cfg80211_bss *cbss, s8 link_id,
6392 const u8 *ap_mld_addr, bool assoc,
6395 struct ieee80211_local *local = sdata->local;
6396 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6397 struct ieee80211_bss *bss = (void *)cbss->priv;
6398 struct sta_info *new_sta = NULL;
6399 struct ieee80211_link_data *link;
6400 bool have_sta = false;
6406 if (WARN_ON(!ap_mld_addr))
6408 err = ieee80211_vif_set_links(sdata, BIT(link_id));
6410 if (WARN_ON(ap_mld_addr))
6412 ap_mld_addr = cbss->bssid;
6413 err = ieee80211_vif_set_links(sdata, 0);
6421 link = sdata_dereference(sdata->link[link_id], sdata);
6422 if (WARN_ON(!link)) {
6427 if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) {
6432 /* If a reconfig is happening, bail out */
6433 if (local->in_reconfig) {
6440 have_sta = sta_info_get(sdata, ap_mld_addr);
6446 new_sta = sta_info_alloc_with_link(sdata, ap_mld_addr,
6447 link_id, cbss->bssid,
6450 new_sta = sta_info_alloc(sdata, ap_mld_addr, GFP_KERNEL);
6457 new_sta->sta.mlo = mlo;
6461 * Set up the information for the new channel before setting the
6462 * new channel. We can't - completely race-free - change the basic
6463 * rates bitmap and the channel (sband) that it refers to, but if
6464 * we set it up before we at least avoid calling into the driver's
6465 * bss_info_changed() method with invalid information (since we do
6466 * call that from changing the channel - only for IDLE and perhaps
6467 * some others, but ...).
6469 * So to avoid that, just set up all the new information before the
6470 * channel, but tell the driver to apply it only afterwards, since
6471 * it might need the new channel for that.
6474 const struct cfg80211_bss_ies *ies;
6475 struct link_sta_info *link_sta;
6478 link_sta = rcu_dereference(new_sta->link[link_id]);
6479 if (WARN_ON(!link_sta)) {
6481 sta_info_free(local, new_sta);
6486 err = ieee80211_mgd_setup_link_sta(link, new_sta,
6490 sta_info_free(local, new_sta);
6494 memcpy(link->u.mgd.bssid, cbss->bssid, ETH_ALEN);
6496 /* set timing information */
6497 link->conf->beacon_int = cbss->beacon_interval;
6498 ies = rcu_dereference(cbss->beacon_ies);
6500 link->conf->sync_tsf = ies->tsf;
6501 link->conf->sync_device_ts =
6502 bss->device_ts_beacon;
6504 ieee80211_get_dtim(ies,
6505 &link->conf->sync_dtim_count,
6507 } else if (!ieee80211_hw_check(&sdata->local->hw,
6508 TIMING_BEACON_ONLY)) {
6509 ies = rcu_dereference(cbss->proberesp_ies);
6510 /* must be non-NULL since beacon IEs were NULL */
6511 link->conf->sync_tsf = ies->tsf;
6512 link->conf->sync_device_ts =
6513 bss->device_ts_presp;
6514 link->conf->sync_dtim_count = 0;
6516 link->conf->sync_tsf = 0;
6517 link->conf->sync_device_ts = 0;
6518 link->conf->sync_dtim_count = 0;
6523 if (new_sta || override) {
6524 err = ieee80211_prep_channel(sdata, link, cbss,
6525 &link->u.mgd.conn_flags);
6528 sta_info_free(local, new_sta);
6535 * tell driver about BSSID, basic rates and timing
6536 * this was set up above, before setting the channel
6538 ieee80211_link_info_change_notify(sdata, link,
6540 BSS_CHANGED_BASIC_RATES |
6541 BSS_CHANGED_BEACON_INT);
6544 sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
6546 err = sta_info_insert(new_sta);
6550 "failed to insert STA entry for the AP (error %d)\n",
6555 WARN_ON_ONCE(!ether_addr_equal(link->u.mgd.bssid, cbss->bssid));
6557 /* Cancel scan to ensure that nothing interferes with connection */
6558 if (local->scanning)
6559 ieee80211_scan_cancel(local);
6564 ieee80211_link_release_channel(&sdata->deflink);
6565 ieee80211_vif_set_links(sdata, 0);
6570 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
6571 struct cfg80211_auth_request *req)
6573 struct ieee80211_local *local = sdata->local;
6574 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6575 struct ieee80211_mgd_auth_data *auth_data;
6580 /* prepare auth data structure */
6582 switch (req->auth_type) {
6583 case NL80211_AUTHTYPE_OPEN_SYSTEM:
6584 auth_alg = WLAN_AUTH_OPEN;
6586 case NL80211_AUTHTYPE_SHARED_KEY:
6589 auth_alg = WLAN_AUTH_SHARED_KEY;
6591 case NL80211_AUTHTYPE_FT:
6592 auth_alg = WLAN_AUTH_FT;
6594 case NL80211_AUTHTYPE_NETWORK_EAP:
6595 auth_alg = WLAN_AUTH_LEAP;
6597 case NL80211_AUTHTYPE_SAE:
6598 auth_alg = WLAN_AUTH_SAE;
6600 case NL80211_AUTHTYPE_FILS_SK:
6601 auth_alg = WLAN_AUTH_FILS_SK;
6603 case NL80211_AUTHTYPE_FILS_SK_PFS:
6604 auth_alg = WLAN_AUTH_FILS_SK_PFS;
6606 case NL80211_AUTHTYPE_FILS_PK:
6607 auth_alg = WLAN_AUTH_FILS_PK;
6613 if (ifmgd->assoc_data)
6616 auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len +
6617 req->ie_len, GFP_KERNEL);
6621 memcpy(auth_data->ap_addr,
6622 req->ap_mld_addr ?: req->bss->bssid,
6624 auth_data->bss = req->bss;
6626 if (req->auth_data_len >= 4) {
6627 if (req->auth_type == NL80211_AUTHTYPE_SAE) {
6628 __le16 *pos = (__le16 *) req->auth_data;
6630 auth_data->sae_trans = le16_to_cpu(pos[0]);
6631 auth_data->sae_status = le16_to_cpu(pos[1]);
6633 memcpy(auth_data->data, req->auth_data + 4,
6634 req->auth_data_len - 4);
6635 auth_data->data_len += req->auth_data_len - 4;
6638 /* Check if continuing authentication or trying to authenticate with the
6639 * same BSS that we were in the process of authenticating with and avoid
6640 * removal and re-addition of the STA entry in
6641 * ieee80211_prep_connection().
6643 cont_auth = ifmgd->auth_data && req->bss == ifmgd->auth_data->bss;
6645 if (req->ie && req->ie_len) {
6646 memcpy(&auth_data->data[auth_data->data_len],
6647 req->ie, req->ie_len);
6648 auth_data->data_len += req->ie_len;
6651 if (req->key && req->key_len) {
6652 auth_data->key_len = req->key_len;
6653 auth_data->key_idx = req->key_idx;
6654 memcpy(auth_data->key, req->key, req->key_len);
6657 auth_data->algorithm = auth_alg;
6659 /* try to authenticate/probe */
6661 if (ifmgd->auth_data) {
6662 if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE) {
6663 auth_data->peer_confirmed =
6664 ifmgd->auth_data->peer_confirmed;
6666 ieee80211_destroy_auth_data(sdata, cont_auth);
6669 /* prep auth_data so we don't go into idle on disassoc */
6670 ifmgd->auth_data = auth_data;
6672 /* If this is continuation of an ongoing SAE authentication exchange
6673 * (i.e., request to send SAE Confirm) and the peer has already
6674 * confirmed, mark authentication completed since we are about to send
6677 if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE &&
6678 auth_data->peer_confirmed && auth_data->sae_trans == 2)
6679 ieee80211_mark_sta_auth(sdata);
6681 if (ifmgd->associated) {
6682 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
6685 "disconnect from AP %pM for new auth to %pM\n",
6686 sdata->vif.cfg.ap_addr, auth_data->ap_addr);
6687 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
6688 WLAN_REASON_UNSPECIFIED,
6691 ieee80211_report_disconnect(sdata, frame_buf,
6692 sizeof(frame_buf), true,
6693 WLAN_REASON_UNSPECIFIED,
6697 sdata_info(sdata, "authenticate with %pM\n", auth_data->ap_addr);
6699 /* needed for transmitting the auth frame(s) properly */
6700 memcpy(sdata->vif.cfg.ap_addr, auth_data->ap_addr, ETH_ALEN);
6702 err = ieee80211_prep_connection(sdata, req->bss, req->link_id,
6703 req->ap_mld_addr, cont_auth, false);
6707 err = ieee80211_auth(sdata);
6709 sta_info_destroy_addr(sdata, auth_data->ap_addr);
6713 /* hold our own reference */
6714 cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
6718 if (!sdata->vif.valid_links) {
6719 eth_zero_addr(sdata->deflink.u.mgd.bssid);
6720 ieee80211_link_info_change_notify(sdata, &sdata->deflink,
6722 mutex_lock(&sdata->local->mtx);
6723 ieee80211_link_release_channel(&sdata->deflink);
6724 mutex_unlock(&sdata->local->mtx);
6726 ifmgd->auth_data = NULL;
6731 static ieee80211_conn_flags_t
6732 ieee80211_setup_assoc_link(struct ieee80211_sub_if_data *sdata,
6733 struct ieee80211_mgd_assoc_data *assoc_data,
6734 struct cfg80211_assoc_request *req,
6735 ieee80211_conn_flags_t conn_flags,
6736 unsigned int link_id)
6738 struct ieee80211_local *local = sdata->local;
6739 const struct cfg80211_bss_ies *beacon_ies;
6740 struct ieee80211_supported_band *sband;
6741 const struct element *ht_elem, *vht_elem;
6742 struct ieee80211_link_data *link;
6743 struct cfg80211_bss *cbss;
6744 struct ieee80211_bss *bss;
6745 bool is_5ghz, is_6ghz;
6747 cbss = assoc_data->link[link_id].bss;
6751 bss = (void *)cbss->priv;
6753 sband = local->hw.wiphy->bands[cbss->channel->band];
6754 if (WARN_ON(!sband))
6757 link = sdata_dereference(sdata->link[link_id], sdata);
6761 is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ;
6762 is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
6764 /* for MLO connections assume advertising all rates is OK */
6765 if (!req->ap_mld_addr) {
6766 assoc_data->supp_rates = bss->supp_rates;
6767 assoc_data->supp_rates_len = bss->supp_rates_len;
6770 /* copy and link elems for the STA profile */
6771 if (req->links[link_id].elems_len) {
6772 memcpy(assoc_data->ie_pos, req->links[link_id].elems,
6773 req->links[link_id].elems_len);
6774 assoc_data->link[link_id].elems = assoc_data->ie_pos;
6775 assoc_data->link[link_id].elems_len = req->links[link_id].elems_len;
6776 assoc_data->ie_pos += req->links[link_id].elems_len;
6780 ht_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_OPERATION);
6781 if (ht_elem && ht_elem->datalen >= sizeof(struct ieee80211_ht_operation))
6782 assoc_data->link[link_id].ap_ht_param =
6783 ((struct ieee80211_ht_operation *)(ht_elem->data))->ht_param;
6785 conn_flags |= IEEE80211_CONN_DISABLE_HT;
6786 vht_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY);
6787 if (vht_elem && vht_elem->datalen >= sizeof(struct ieee80211_vht_cap)) {
6788 memcpy(&assoc_data->link[link_id].ap_vht_cap, vht_elem->data,
6789 sizeof(struct ieee80211_vht_cap));
6790 } else if (is_5ghz) {
6792 "VHT capa missing/short, disabling VHT/HE/EHT\n");
6793 conn_flags |= IEEE80211_CONN_DISABLE_VHT |
6794 IEEE80211_CONN_DISABLE_HE |
6795 IEEE80211_CONN_DISABLE_EHT;
6799 link->u.mgd.beacon_crc_valid = false;
6800 link->u.mgd.dtim_period = 0;
6801 link->u.mgd.have_beacon = false;
6803 /* override HT/VHT configuration only if the AP and we support it */
6804 if (!(conn_flags & IEEE80211_CONN_DISABLE_HT)) {
6805 struct ieee80211_sta_ht_cap sta_ht_cap;
6807 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
6808 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
6812 beacon_ies = rcu_dereference(cbss->beacon_ies);
6814 const struct element *elem;
6817 ieee80211_get_dtim(beacon_ies, &dtim_count,
6818 &link->u.mgd.dtim_period);
6820 sdata->deflink.u.mgd.have_beacon = true;
6822 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
6823 link->conf->sync_tsf = beacon_ies->tsf;
6824 link->conf->sync_device_ts = bss->device_ts_beacon;
6825 link->conf->sync_dtim_count = dtim_count;
6828 elem = cfg80211_find_ext_elem(WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION,
6829 beacon_ies->data, beacon_ies->len);
6830 if (elem && elem->datalen >= 3)
6831 link->conf->profile_periodicity = elem->data[2];
6833 link->conf->profile_periodicity = 0;
6835 elem = cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY,
6836 beacon_ies->data, beacon_ies->len);
6837 if (elem && elem->datalen >= 11 &&
6838 (elem->data[10] & WLAN_EXT_CAPA11_EMA_SUPPORT))
6839 link->conf->ema_ap = true;
6841 link->conf->ema_ap = false;
6845 if (bss->corrupt_data) {
6846 char *corrupt_type = "data";
6848 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
6849 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
6850 corrupt_type = "beacon and probe response";
6852 corrupt_type = "beacon";
6853 } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) {
6854 corrupt_type = "probe response";
6856 sdata_info(sdata, "associating to AP %pM with corrupt %s\n",
6857 cbss->bssid, corrupt_type);
6860 if (link->u.mgd.req_smps == IEEE80211_SMPS_AUTOMATIC) {
6861 if (sdata->u.mgd.powersave)
6862 link->smps_mode = IEEE80211_SMPS_DYNAMIC;
6864 link->smps_mode = IEEE80211_SMPS_OFF;
6866 link->smps_mode = link->u.mgd.req_smps;
6872 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
6873 struct cfg80211_assoc_request *req)
6875 unsigned int assoc_link_id = req->link_id < 0 ? 0 : req->link_id;
6876 struct ieee80211_local *local = sdata->local;
6877 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6878 struct ieee80211_mgd_assoc_data *assoc_data;
6879 const struct element *ssid_elem;
6880 struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg;
6881 ieee80211_conn_flags_t conn_flags = 0;
6882 struct ieee80211_link_data *link;
6883 struct cfg80211_bss *cbss;
6884 struct ieee80211_bss *bss;
6887 size_t size = sizeof(*assoc_data) + req->ie_len;
6889 for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++)
6890 size += req->links[i].elems_len;
6892 if (req->ap_mld_addr) {
6893 for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++) {
6894 if (!req->links[i].bss)
6896 if (i == assoc_link_id)
6899 * For now, support only a single link in MLO, we
6900 * don't have the necessary parsing of the multi-
6901 * link element in the association response, etc.
6904 "refusing MLO association with >1 links\n");
6909 /* FIXME: no support for 4-addr MLO yet */
6910 if (sdata->u.mgd.use_4addr && req->link_id >= 0)
6913 assoc_data = kzalloc(size, GFP_KERNEL);
6917 cbss = req->link_id < 0 ? req->bss : req->links[req->link_id].bss;
6920 ssid_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID);
6921 if (!ssid_elem || ssid_elem->datalen > sizeof(assoc_data->ssid)) {
6926 memcpy(assoc_data->ssid, ssid_elem->data, ssid_elem->datalen);
6927 assoc_data->ssid_len = ssid_elem->datalen;
6928 memcpy(vif_cfg->ssid, assoc_data->ssid, assoc_data->ssid_len);
6929 vif_cfg->ssid_len = assoc_data->ssid_len;
6932 if (req->ap_mld_addr) {
6933 for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++) {
6934 if (!req->links[i].bss)
6936 link = sdata_dereference(sdata->link[i], sdata);
6938 ether_addr_copy(assoc_data->link[i].addr,
6941 eth_random_addr(assoc_data->link[i].addr);
6944 memcpy(assoc_data->link[0].addr, sdata->vif.addr, ETH_ALEN);
6947 assoc_data->s1g = cbss->channel->band == NL80211_BAND_S1GHZ;
6949 memcpy(assoc_data->ap_addr,
6950 req->ap_mld_addr ?: req->bss->bssid,
6953 if (ifmgd->associated) {
6954 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
6957 "disconnect from AP %pM for new assoc to %pM\n",
6958 sdata->vif.cfg.ap_addr, assoc_data->ap_addr);
6959 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
6960 WLAN_REASON_UNSPECIFIED,
6963 ieee80211_report_disconnect(sdata, frame_buf,
6964 sizeof(frame_buf), true,
6965 WLAN_REASON_UNSPECIFIED,
6969 if (ifmgd->auth_data && !ifmgd->auth_data->done) {
6974 if (ifmgd->assoc_data) {
6979 if (ifmgd->auth_data) {
6982 /* keep sta info, bssid if matching */
6983 match = ether_addr_equal(ifmgd->auth_data->ap_addr,
6984 assoc_data->ap_addr);
6985 ieee80211_destroy_auth_data(sdata, match);
6988 /* prepare assoc data */
6990 bss = (void *)cbss->priv;
6991 assoc_data->wmm = bss->wmm_used &&
6992 (local->hw.queues >= IEEE80211_NUM_ACS);
6995 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
6996 * We still associate in non-HT mode (11a/b/g) if any one of these
6997 * ciphers is configured as pairwise.
6998 * We can set this to true for non-11n hardware, that'll be checked
6999 * separately along with the peer capabilities.
7001 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
7002 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
7003 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
7004 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
7005 conn_flags |= IEEE80211_CONN_DISABLE_HT;
7006 conn_flags |= IEEE80211_CONN_DISABLE_VHT;
7007 conn_flags |= IEEE80211_CONN_DISABLE_HE;
7008 conn_flags |= IEEE80211_CONN_DISABLE_EHT;
7009 netdev_info(sdata->dev,
7010 "disabling HT/VHT/HE due to WEP/TKIP use\n");
7014 /* also disable HT/VHT/HE/EHT if the AP doesn't use WMM */
7015 if (!bss->wmm_used) {
7016 conn_flags |= IEEE80211_CONN_DISABLE_HT;
7017 conn_flags |= IEEE80211_CONN_DISABLE_VHT;
7018 conn_flags |= IEEE80211_CONN_DISABLE_HE;
7019 conn_flags |= IEEE80211_CONN_DISABLE_EHT;
7020 netdev_info(sdata->dev,
7021 "disabling HT/VHT/HE as WMM/QoS is not supported by the AP\n");
7024 if (req->flags & ASSOC_REQ_DISABLE_HT) {
7025 mlme_dbg(sdata, "HT disabled by flag, disabling HT/VHT/HE\n");
7026 conn_flags |= IEEE80211_CONN_DISABLE_HT;
7027 conn_flags |= IEEE80211_CONN_DISABLE_VHT;
7028 conn_flags |= IEEE80211_CONN_DISABLE_HE;
7029 conn_flags |= IEEE80211_CONN_DISABLE_EHT;
7032 if (req->flags & ASSOC_REQ_DISABLE_VHT) {
7033 mlme_dbg(sdata, "VHT disabled by flag, disabling VHT\n");
7034 conn_flags |= IEEE80211_CONN_DISABLE_VHT;
7037 if (req->flags & ASSOC_REQ_DISABLE_HE) {
7038 mlme_dbg(sdata, "HE disabled by flag, disabling HE/EHT\n");
7039 conn_flags |= IEEE80211_CONN_DISABLE_HE;
7040 conn_flags |= IEEE80211_CONN_DISABLE_EHT;
7043 if (req->flags & ASSOC_REQ_DISABLE_EHT)
7044 conn_flags |= IEEE80211_CONN_DISABLE_EHT;
7046 memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
7047 memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
7048 sizeof(ifmgd->ht_capa_mask));
7050 memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
7051 memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
7052 sizeof(ifmgd->vht_capa_mask));
7054 memcpy(&ifmgd->s1g_capa, &req->s1g_capa, sizeof(ifmgd->s1g_capa));
7055 memcpy(&ifmgd->s1g_capa_mask, &req->s1g_capa_mask,
7056 sizeof(ifmgd->s1g_capa_mask));
7058 if (req->ie && req->ie_len) {
7059 memcpy(assoc_data->ie, req->ie, req->ie_len);
7060 assoc_data->ie_len = req->ie_len;
7061 assoc_data->ie_pos = assoc_data->ie + assoc_data->ie_len;
7063 assoc_data->ie_pos = assoc_data->ie;
7066 if (req->fils_kek) {
7067 /* should already be checked in cfg80211 - so warn */
7068 if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) {
7072 memcpy(assoc_data->fils_kek, req->fils_kek,
7074 assoc_data->fils_kek_len = req->fils_kek_len;
7077 if (req->fils_nonces)
7078 memcpy(assoc_data->fils_nonces, req->fils_nonces,
7079 2 * FILS_NONCE_LEN);
7081 /* default timeout */
7082 assoc_data->timeout = jiffies;
7083 assoc_data->timeout_started = true;
7085 assoc_data->assoc_link_id = assoc_link_id;
7087 if (req->ap_mld_addr) {
7088 for (i = 0; i < ARRAY_SIZE(assoc_data->link); i++) {
7089 assoc_data->link[i].conn_flags = conn_flags;
7090 assoc_data->link[i].bss = req->links[i].bss;
7093 /* if there was no authentication, set up the link */
7094 err = ieee80211_vif_set_links(sdata, BIT(assoc_link_id));
7098 assoc_data->link[0].conn_flags = conn_flags;
7099 assoc_data->link[0].bss = cbss;
7102 link = sdata_dereference(sdata->link[assoc_link_id], sdata);
7103 if (WARN_ON(!link)) {
7108 /* keep old conn_flags from ieee80211_prep_channel() from auth */
7109 conn_flags |= link->u.mgd.conn_flags;
7110 conn_flags |= ieee80211_setup_assoc_link(sdata, assoc_data, req,
7111 conn_flags, assoc_link_id);
7112 override = link->u.mgd.conn_flags != conn_flags;
7113 link->u.mgd.conn_flags |= conn_flags;
7115 if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
7116 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK),
7117 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
7118 sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
7120 if (bss->wmm_used && bss->uapsd_supported &&
7121 (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) {
7122 assoc_data->uapsd = true;
7123 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
7125 assoc_data->uapsd = false;
7126 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
7129 if (req->prev_bssid)
7130 memcpy(assoc_data->prev_ap_addr, req->prev_bssid, ETH_ALEN);
7133 ifmgd->mfp = IEEE80211_MFP_REQUIRED;
7134 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
7136 ifmgd->mfp = IEEE80211_MFP_DISABLED;
7137 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
7140 if (req->flags & ASSOC_REQ_USE_RRM)
7141 ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
7143 ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
7145 if (req->crypto.control_port)
7146 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
7148 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
7150 sdata->control_port_protocol = req->crypto.control_port_ethertype;
7151 sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
7152 sdata->control_port_over_nl80211 =
7153 req->crypto.control_port_over_nl80211;
7154 sdata->control_port_no_preauth = req->crypto.control_port_no_preauth;
7156 /* kick off associate process */
7157 ifmgd->assoc_data = assoc_data;
7159 for (i = 0; i < ARRAY_SIZE(assoc_data->link); i++) {
7160 if (!assoc_data->link[i].bss)
7162 if (i == assoc_data->assoc_link_id)
7164 /* only calculate the flags, hence link == NULL */
7165 err = ieee80211_prep_channel(sdata, NULL, assoc_data->link[i].bss,
7166 &assoc_data->link[i].conn_flags);
7171 /* needed for transmitting the assoc frames properly */
7172 memcpy(sdata->vif.cfg.ap_addr, assoc_data->ap_addr, ETH_ALEN);
7174 err = ieee80211_prep_connection(sdata, cbss, req->link_id,
7175 req->ap_mld_addr, true, override);
7179 assoc_data->link[assoc_data->assoc_link_id].conn_flags =
7180 link->u.mgd.conn_flags;
7182 if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC)) {
7183 const struct cfg80211_bss_ies *beacon_ies;
7186 beacon_ies = rcu_dereference(req->bss->beacon_ies);
7190 * Wait up to one beacon interval ...
7191 * should this be more if we miss one?
7193 sdata_info(sdata, "waiting for beacon from %pM\n",
7195 assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
7196 assoc_data->timeout_started = true;
7197 assoc_data->need_beacon = true;
7202 run_again(sdata, assoc_data->timeout);
7206 eth_zero_addr(sdata->deflink.u.mgd.bssid);
7207 ieee80211_link_info_change_notify(sdata, &sdata->deflink,
7209 ifmgd->assoc_data = NULL;
7215 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
7216 struct cfg80211_deauth_request *req)
7218 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
7219 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
7220 bool tx = !req->local_state_change;
7221 struct ieee80211_prep_tx_info info = {
7222 .subtype = IEEE80211_STYPE_DEAUTH,
7225 if (ifmgd->auth_data &&
7226 ether_addr_equal(ifmgd->auth_data->ap_addr, req->bssid)) {
7228 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
7229 req->bssid, req->reason_code,
7230 ieee80211_get_reason_code_string(req->reason_code));
7232 drv_mgd_prepare_tx(sdata->local, sdata, &info);
7233 ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid,
7234 IEEE80211_STYPE_DEAUTH,
7235 req->reason_code, tx,
7237 ieee80211_destroy_auth_data(sdata, false);
7238 ieee80211_report_disconnect(sdata, frame_buf,
7239 sizeof(frame_buf), true,
7240 req->reason_code, false);
7241 drv_mgd_complete_tx(sdata->local, sdata, &info);
7245 if (ifmgd->assoc_data &&
7246 ether_addr_equal(ifmgd->assoc_data->ap_addr, req->bssid)) {
7248 "aborting association with %pM by local choice (Reason: %u=%s)\n",
7249 req->bssid, req->reason_code,
7250 ieee80211_get_reason_code_string(req->reason_code));
7252 drv_mgd_prepare_tx(sdata->local, sdata, &info);
7253 ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid,
7254 IEEE80211_STYPE_DEAUTH,
7255 req->reason_code, tx,
7257 ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON);
7258 ieee80211_report_disconnect(sdata, frame_buf,
7259 sizeof(frame_buf), true,
7260 req->reason_code, false);
7264 if (ifmgd->associated &&
7265 ether_addr_equal(sdata->vif.cfg.ap_addr, req->bssid)) {
7267 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
7268 req->bssid, req->reason_code,
7269 ieee80211_get_reason_code_string(req->reason_code));
7271 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
7272 req->reason_code, tx, frame_buf);
7273 ieee80211_report_disconnect(sdata, frame_buf,
7274 sizeof(frame_buf), true,
7275 req->reason_code, false);
7276 drv_mgd_complete_tx(sdata->local, sdata, &info);
7283 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
7284 struct cfg80211_disassoc_request *req)
7286 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
7288 if (!sdata->u.mgd.associated ||
7289 memcmp(sdata->vif.cfg.ap_addr, req->ap_addr, ETH_ALEN))
7293 "disassociating from %pM by local choice (Reason: %u=%s)\n",
7294 req->ap_addr, req->reason_code,
7295 ieee80211_get_reason_code_string(req->reason_code));
7297 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
7298 req->reason_code, !req->local_state_change,
7301 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
7302 req->reason_code, false);
7307 void ieee80211_mgd_stop_link(struct ieee80211_link_data *link)
7309 cancel_work_sync(&link->u.mgd.request_smps_work);
7310 cancel_work_sync(&link->u.mgd.chswitch_work);
7313 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
7315 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
7318 * Make sure some work items will not run after this,
7319 * they will not do anything but might not have been
7320 * cancelled when disconnecting.
7322 cancel_work_sync(&ifmgd->monitor_work);
7323 cancel_work_sync(&ifmgd->beacon_connection_loss_work);
7324 cancel_work_sync(&ifmgd->csa_connection_drop_work);
7325 cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
7328 if (ifmgd->assoc_data)
7329 ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT);
7330 if (ifmgd->auth_data)
7331 ieee80211_destroy_auth_data(sdata, false);
7332 spin_lock_bh(&ifmgd->teardown_lock);
7333 if (ifmgd->teardown_skb) {
7334 kfree_skb(ifmgd->teardown_skb);
7335 ifmgd->teardown_skb = NULL;
7336 ifmgd->orig_teardown_skb = NULL;
7338 kfree(ifmgd->assoc_req_ies);
7339 ifmgd->assoc_req_ies = NULL;
7340 ifmgd->assoc_req_ies_len = 0;
7341 spin_unlock_bh(&ifmgd->teardown_lock);
7342 del_timer_sync(&ifmgd->timer);
7343 sdata_unlock(sdata);
7346 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
7347 enum nl80211_cqm_rssi_threshold_event rssi_event,
7351 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
7353 trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level);
7355 cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp);
7357 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
7359 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp)
7361 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
7363 trace_api_cqm_beacon_loss_notify(sdata->local, sdata);
7365 cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp);
7367 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);
7369 static void _ieee80211_enable_rssi_reports(struct ieee80211_sub_if_data *sdata,
7373 trace_api_enable_rssi_reports(sdata, rssi_min_thold, rssi_max_thold);
7375 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
7379 * Scale up threshold values before storing it, as the RSSI averaging
7380 * algorithm uses a scaled up value as well. Change this scaling
7381 * factor if the RSSI averaging algorithm changes.
7383 sdata->u.mgd.rssi_min_thold = rssi_min_thold*16;
7384 sdata->u.mgd.rssi_max_thold = rssi_max_thold*16;
7387 void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
7391 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
7393 WARN_ON(rssi_min_thold == rssi_max_thold ||
7394 rssi_min_thold > rssi_max_thold);
7396 _ieee80211_enable_rssi_reports(sdata, rssi_min_thold,
7399 EXPORT_SYMBOL(ieee80211_enable_rssi_reports);
7401 void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif)
7403 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
7405 _ieee80211_enable_rssi_reports(sdata, 0, 0);
7407 EXPORT_SYMBOL(ieee80211_disable_rssi_reports);