1 // SPDX-License-Identifier: GPL-2.0-only
3 * BSS client mode implementation
4 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
5 * Copyright 2004, Instant802 Networks, Inc.
6 * Copyright 2005, Devicescape Software, Inc.
7 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
8 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9 * Copyright 2013-2014 Intel Mobile Communications GmbH
10 * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
11 * Copyright (C) 2018 - 2023 Intel Corporation
14 #include <linux/delay.h>
15 #include <linux/fips.h>
16 #include <linux/if_ether.h>
17 #include <linux/skbuff.h>
18 #include <linux/if_arp.h>
19 #include <linux/etherdevice.h>
20 #include <linux/moduleparam.h>
21 #include <linux/rtnetlink.h>
22 #include <linux/crc32.h>
23 #include <linux/slab.h>
24 #include <linux/export.h>
25 #include <net/mac80211.h>
26 #include <asm/unaligned.h>
28 #include "ieee80211_i.h"
29 #include "driver-ops.h"
32 #include "fils_aead.h"
34 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
35 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
36 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
37 #define IEEE80211_AUTH_TIMEOUT_SAE (HZ * 2)
38 #define IEEE80211_AUTH_MAX_TRIES 3
39 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
40 #define IEEE80211_AUTH_WAIT_SAE_RETRY (HZ * 2)
41 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
42 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
43 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
44 #define IEEE80211_ASSOC_MAX_TRIES 3
46 static int max_nullfunc_tries = 2;
47 module_param(max_nullfunc_tries, int, 0644);
48 MODULE_PARM_DESC(max_nullfunc_tries,
49 "Maximum nullfunc tx tries before disconnecting (reason 4).");
51 static int max_probe_tries = 5;
52 module_param(max_probe_tries, int, 0644);
53 MODULE_PARM_DESC(max_probe_tries,
54 "Maximum probe tries before disconnecting (reason 4).");
57 * Beacon loss timeout is calculated as N frames times the
58 * advertised beacon interval. This may need to be somewhat
59 * higher than what hardware might detect to account for
60 * delays in the host processing frames. But since we also
61 * probe on beacon miss before declaring the connection lost
62 * default to what we want.
64 static int beacon_loss_count = 7;
65 module_param(beacon_loss_count, int, 0644);
66 MODULE_PARM_DESC(beacon_loss_count,
67 "Number of beacon intervals before we decide beacon was lost.");
70 * Time the connection can be idle before we probe
71 * it to see if we can still talk to the AP.
73 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
75 * Time we wait for a probe response after sending
76 * a probe request because of beacon loss or for
77 * checking the connection still works.
79 static int probe_wait_ms = 500;
80 module_param(probe_wait_ms, int, 0644);
81 MODULE_PARM_DESC(probe_wait_ms,
82 "Maximum time(ms) to wait for probe response"
83 " before disconnecting (reason 4).");
86 * How many Beacon frames need to have been used in average signal strength
87 * before starting to indicate signal change events.
89 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
92 * Extract from the given disabled subchannel bitmap (raw format
93 * from the EHT Operation Element) the bits for the subchannel
94 * we're using right now.
97 ieee80211_extract_dis_subch_bmap(const struct ieee80211_eht_operation *eht_oper,
98 struct cfg80211_chan_def *chandef, u16 bitmap)
100 struct ieee80211_eht_operation_info *info = (void *)eht_oper->optional;
101 struct cfg80211_chan_def ap_chandef = *chandef;
102 u32 ap_center_freq, local_center_freq;
104 int ap_start_freq, local_start_freq;
107 if (!(eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) ||
109 IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT))
112 /* set 160/320 supported to get the full AP definition */
113 ieee80211_chandef_eht_oper(eht_oper, true, true, &ap_chandef);
114 ap_center_freq = ap_chandef.center_freq1;
115 ap_bw = 20 * BIT(u8_get_bits(info->control,
116 IEEE80211_EHT_OPER_CHAN_WIDTH));
117 ap_start_freq = ap_center_freq - ap_bw / 2;
118 local_center_freq = chandef->center_freq1;
119 local_bw = 20 * BIT(ieee80211_chan_width_to_rx_bw(chandef->width));
120 local_start_freq = local_center_freq - local_bw / 2;
121 shift = (local_start_freq - ap_start_freq) / 20;
122 mask = BIT(local_bw / 20) - 1;
124 return (bitmap >> shift) & mask;
128 * Handle the puncturing bitmap, possibly downgrading bandwidth to get a
132 ieee80211_handle_puncturing_bitmap(struct ieee80211_link_data *link,
133 const struct ieee80211_eht_operation *eht_oper,
134 u16 bitmap, u64 *changed)
136 struct cfg80211_chan_def *chandef = &link->conf->chandef;
143 while (chandef->width > NL80211_CHAN_WIDTH_40) {
145 ieee80211_extract_dis_subch_bmap(eht_oper, chandef,
148 if (cfg80211_valid_disable_subchannel_bitmap(&bitmap,
151 link->u.mgd.conn_flags |=
152 ieee80211_chandef_downgrade(chandef);
153 *changed |= BSS_CHANGED_BANDWIDTH;
156 if (chandef->width <= NL80211_CHAN_WIDTH_40)
159 if (link->conf->eht_puncturing != extracted) {
160 link->conf->eht_puncturing = extracted;
161 *changed |= BSS_CHANGED_EHT_PUNCTURING;
166 * We can have multiple work items (and connection probing)
167 * scheduling this timer, but we need to take care to only
168 * reschedule it when it should fire _earlier_ than it was
169 * asked for before, or if it's not pending right now. This
170 * function ensures that. Note that it then is required to
171 * run this function for all timeouts after the first one
172 * has happened -- the work that runs from this timer will
175 static void run_again(struct ieee80211_sub_if_data *sdata,
176 unsigned long timeout)
178 sdata_assert_lock(sdata);
180 if (!timer_pending(&sdata->u.mgd.timer) ||
181 time_before(timeout, sdata->u.mgd.timer.expires))
182 mod_timer(&sdata->u.mgd.timer, timeout);
185 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
187 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
190 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
193 mod_timer(&sdata->u.mgd.bcn_mon_timer,
194 round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
197 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
199 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
201 if (unlikely(!ifmgd->associated))
204 if (ifmgd->probe_send_count)
205 ifmgd->probe_send_count = 0;
207 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
210 mod_timer(&ifmgd->conn_mon_timer,
211 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
214 static int ecw2cw(int ecw)
216 return (1 << ecw) - 1;
219 static ieee80211_conn_flags_t
220 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
221 struct ieee80211_link_data *link,
222 ieee80211_conn_flags_t conn_flags,
223 struct ieee80211_supported_band *sband,
224 struct ieee80211_channel *channel,
226 const struct ieee80211_ht_operation *ht_oper,
227 const struct ieee80211_vht_operation *vht_oper,
228 const struct ieee80211_he_operation *he_oper,
229 const struct ieee80211_eht_operation *eht_oper,
230 const struct ieee80211_s1g_oper_ie *s1g_oper,
231 struct cfg80211_chan_def *chandef, bool tracking)
233 struct cfg80211_chan_def vht_chandef;
234 struct ieee80211_sta_ht_cap sta_ht_cap;
235 ieee80211_conn_flags_t ret;
238 memset(chandef, 0, sizeof(struct cfg80211_chan_def));
239 chandef->chan = channel;
240 chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
241 chandef->center_freq1 = channel->center_freq;
242 chandef->freq1_offset = channel->freq_offset;
244 if (channel->band == NL80211_BAND_6GHZ) {
245 if (!ieee80211_chandef_he_6ghz_oper(sdata, he_oper, eht_oper,
248 "bad 6 GHz operation, disabling HT/VHT/HE/EHT\n");
249 ret = IEEE80211_CONN_DISABLE_HT |
250 IEEE80211_CONN_DISABLE_VHT |
251 IEEE80211_CONN_DISABLE_HE |
252 IEEE80211_CONN_DISABLE_EHT;
256 vht_chandef = *chandef;
258 } else if (sband->band == NL80211_BAND_S1GHZ) {
259 if (!ieee80211_chandef_s1g_oper(s1g_oper, chandef)) {
261 "Missing S1G Operation Element? Trying operating == primary\n");
262 chandef->width = ieee80211_s1g_channel_width(channel);
265 ret = IEEE80211_CONN_DISABLE_HT | IEEE80211_CONN_DISABLE_40MHZ |
266 IEEE80211_CONN_DISABLE_VHT |
267 IEEE80211_CONN_DISABLE_80P80MHZ |
268 IEEE80211_CONN_DISABLE_160MHZ;
272 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
273 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
275 if (!ht_oper || !sta_ht_cap.ht_supported) {
276 mlme_dbg(sdata, "HT operation missing / HT not supported\n");
277 ret = IEEE80211_CONN_DISABLE_HT |
278 IEEE80211_CONN_DISABLE_VHT |
279 IEEE80211_CONN_DISABLE_HE |
280 IEEE80211_CONN_DISABLE_EHT;
284 chandef->width = NL80211_CHAN_WIDTH_20;
286 ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
288 /* check that channel matches the right operating channel */
289 if (!tracking && channel->center_freq != ht_cfreq) {
291 * It's possible that some APs are confused here;
292 * Netgear WNDR3700 sometimes reports 4 higher than
293 * the actual channel in association responses, but
294 * since we look at probe response/beacon data here
298 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
299 channel->center_freq, ht_cfreq,
300 ht_oper->primary_chan, channel->band);
301 ret = IEEE80211_CONN_DISABLE_HT |
302 IEEE80211_CONN_DISABLE_VHT |
303 IEEE80211_CONN_DISABLE_HE |
304 IEEE80211_CONN_DISABLE_EHT;
308 /* check 40 MHz support, if we have it */
309 if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
310 ieee80211_chandef_ht_oper(ht_oper, chandef);
312 mlme_dbg(sdata, "40 MHz not supported\n");
313 /* 40 MHz (and 80 MHz) must be supported for VHT */
314 ret = IEEE80211_CONN_DISABLE_VHT;
315 /* also mark 40 MHz disabled */
316 ret |= IEEE80211_CONN_DISABLE_40MHZ;
320 if (!vht_oper || !sband->vht_cap.vht_supported) {
321 mlme_dbg(sdata, "VHT operation missing / VHT not supported\n");
322 ret = IEEE80211_CONN_DISABLE_VHT;
326 vht_chandef = *chandef;
327 if (!(conn_flags & IEEE80211_CONN_DISABLE_HE) &&
329 (le32_to_cpu(he_oper->he_oper_params) &
330 IEEE80211_HE_OPERATION_VHT_OPER_INFO)) {
331 struct ieee80211_vht_operation he_oper_vht_cap;
334 * Set only first 3 bytes (other 2 aren't used in
335 * ieee80211_chandef_vht_oper() anyway)
337 memcpy(&he_oper_vht_cap, he_oper->optional, 3);
338 he_oper_vht_cap.basic_mcs_set = cpu_to_le16(0);
340 if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info,
341 &he_oper_vht_cap, ht_oper,
343 if (!(conn_flags & IEEE80211_CONN_DISABLE_HE))
345 "HE AP VHT information is invalid, disabling HE\n");
346 ret = IEEE80211_CONN_DISABLE_HE | IEEE80211_CONN_DISABLE_EHT;
349 } else if (!ieee80211_chandef_vht_oper(&sdata->local->hw,
353 if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT))
355 "AP VHT information is invalid, disabling VHT\n");
356 ret = IEEE80211_CONN_DISABLE_VHT;
360 if (!cfg80211_chandef_valid(&vht_chandef)) {
361 if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT))
363 "AP VHT information is invalid, disabling VHT\n");
364 ret = IEEE80211_CONN_DISABLE_VHT;
368 if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
373 if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
374 if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT))
376 "AP VHT information doesn't match HT, disabling VHT\n");
377 ret = IEEE80211_CONN_DISABLE_VHT;
381 *chandef = vht_chandef;
384 * handle the case that the EHT operation indicates that it holds EHT
385 * operation information (in case that the channel width differs from
386 * the channel width reported in HT/VHT/HE).
388 if (eht_oper && (eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT)) {
389 struct cfg80211_chan_def eht_chandef = *chandef;
391 ieee80211_chandef_eht_oper(eht_oper,
393 NL80211_CHAN_WIDTH_160,
394 false, &eht_chandef);
396 if (!cfg80211_chandef_valid(&eht_chandef)) {
397 if (!(conn_flags & IEEE80211_CONN_DISABLE_EHT))
399 "AP EHT information is invalid, disabling EHT\n");
400 ret = IEEE80211_CONN_DISABLE_EHT;
404 if (!cfg80211_chandef_compatible(chandef, &eht_chandef)) {
405 if (!(conn_flags & IEEE80211_CONN_DISABLE_EHT))
407 "AP EHT information is incompatible, disabling EHT\n");
408 ret = IEEE80211_CONN_DISABLE_EHT;
412 *chandef = eht_chandef;
419 * When tracking the current AP, don't do any further checks if the
420 * new chandef is identical to the one we're currently using for the
421 * connection. This keeps us from playing ping-pong with regulatory,
422 * without it the following can happen (for example):
423 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
424 * - AP advertises regdom US
425 * - CRDA loads regdom US with 80 MHz prohibited (old database)
426 * - the code below detects an unsupported channel, downgrades, and
427 * we disconnect from the AP in the caller
428 * - disconnect causes CRDA to reload world regdomain and the game
430 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
432 * It seems possible that there are still scenarios with CSA or real
433 * bandwidth changes where a this could happen, but those cases are
434 * less common and wouldn't completely prevent using the AP.
437 cfg80211_chandef_identical(chandef, &link->conf->chandef))
440 /* don't print the message below for VHT mismatch if VHT is disabled */
441 if (ret & IEEE80211_CONN_DISABLE_VHT)
442 vht_chandef = *chandef;
445 * Ignore the DISABLED flag when we're already connected and only
446 * tracking the APs beacon for bandwidth changes - otherwise we
447 * might get disconnected here if we connect to an AP, update our
448 * regulatory information based on the AP's country IE and the
449 * information we have is wrong/outdated and disables the channel
450 * that we're actually using for the connection to the AP.
452 while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
454 IEEE80211_CHAN_DISABLED)) {
455 if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
456 ret = IEEE80211_CONN_DISABLE_HT |
457 IEEE80211_CONN_DISABLE_VHT |
458 IEEE80211_CONN_DISABLE_HE |
459 IEEE80211_CONN_DISABLE_EHT;
463 ret |= ieee80211_chandef_downgrade(chandef);
466 if (!he_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef,
467 IEEE80211_CHAN_NO_HE))
468 ret |= IEEE80211_CONN_DISABLE_HE | IEEE80211_CONN_DISABLE_EHT;
470 if (!eht_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef,
471 IEEE80211_CHAN_NO_EHT))
472 ret |= IEEE80211_CONN_DISABLE_EHT;
474 if (chandef->width != vht_chandef.width && !tracking)
476 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
478 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
482 static int ieee80211_config_bw(struct ieee80211_link_data *link,
483 const struct ieee80211_ht_cap *ht_cap,
484 const struct ieee80211_vht_cap *vht_cap,
485 const struct ieee80211_ht_operation *ht_oper,
486 const struct ieee80211_vht_operation *vht_oper,
487 const struct ieee80211_he_operation *he_oper,
488 const struct ieee80211_eht_operation *eht_oper,
489 const struct ieee80211_s1g_oper_ie *s1g_oper,
490 const u8 *bssid, u64 *changed)
492 struct ieee80211_sub_if_data *sdata = link->sdata;
493 struct ieee80211_local *local = sdata->local;
494 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
495 struct ieee80211_channel *chan = link->conf->chandef.chan;
496 struct ieee80211_supported_band *sband =
497 local->hw.wiphy->bands[chan->band];
498 struct cfg80211_chan_def chandef;
500 ieee80211_conn_flags_t flags;
501 u32 vht_cap_info = 0;
504 /* if HT was/is disabled, don't track any bandwidth changes */
505 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT || !ht_oper)
508 /* don't check VHT if we associated as non-VHT station */
509 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)
512 /* don't check HE if we associated as non-HE station */
513 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE ||
514 !ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif)) {
519 /* don't check EHT if we associated as non-EHT station */
520 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT ||
521 !ieee80211_get_eht_iftype_cap_vif(sband, &sdata->vif))
525 * if bss configuration changed store the new one -
526 * this may be applicable even if channel is identical
528 ht_opmode = le16_to_cpu(ht_oper->operation_mode);
529 if (link->conf->ht_operation_mode != ht_opmode) {
530 *changed |= BSS_CHANGED_HT;
531 link->conf->ht_operation_mode = ht_opmode;
535 vht_cap_info = le32_to_cpu(vht_cap->vht_cap_info);
537 /* calculate new channel (type) based on HT/VHT/HE operation IEs */
538 flags = ieee80211_determine_chantype(sdata, link,
539 link->u.mgd.conn_flags,
540 sband, chan, vht_cap_info,
543 s1g_oper, &chandef, true);
546 * Downgrade the new channel if we associated with restricted
547 * capabilities. For example, if we associated as a 20 MHz STA
548 * to a 40 MHz AP (due to regulatory, capabilities or config
549 * reasons) then switching to a 40 MHz channel now won't do us
550 * any good -- we couldn't use it with the AP.
552 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_80P80MHZ &&
553 chandef.width == NL80211_CHAN_WIDTH_80P80)
554 flags |= ieee80211_chandef_downgrade(&chandef);
555 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_160MHZ &&
556 chandef.width == NL80211_CHAN_WIDTH_160)
557 flags |= ieee80211_chandef_downgrade(&chandef);
558 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_40MHZ &&
559 chandef.width > NL80211_CHAN_WIDTH_20)
560 flags |= ieee80211_chandef_downgrade(&chandef);
562 if (cfg80211_chandef_identical(&chandef, &link->conf->chandef))
566 "AP %pM changed bandwidth, new config is %d.%03d MHz, width %d (%d.%03d/%d MHz)\n",
567 link->u.mgd.bssid, chandef.chan->center_freq,
568 chandef.chan->freq_offset, chandef.width,
569 chandef.center_freq1, chandef.freq1_offset,
570 chandef.center_freq2);
572 if (flags != (link->u.mgd.conn_flags &
573 (IEEE80211_CONN_DISABLE_HT |
574 IEEE80211_CONN_DISABLE_VHT |
575 IEEE80211_CONN_DISABLE_HE |
576 IEEE80211_CONN_DISABLE_EHT |
577 IEEE80211_CONN_DISABLE_40MHZ |
578 IEEE80211_CONN_DISABLE_80P80MHZ |
579 IEEE80211_CONN_DISABLE_160MHZ |
580 IEEE80211_CONN_DISABLE_320MHZ)) ||
581 !cfg80211_chandef_valid(&chandef)) {
583 "AP %pM changed caps/bw in a way we can't support (0x%x/0x%x) - disconnect\n",
584 link->u.mgd.bssid, flags, ifmgd->flags);
588 ret = ieee80211_link_change_bandwidth(link, &chandef, changed);
592 "AP %pM changed bandwidth to incompatible one - disconnect\n",
600 /* frame sending functions */
602 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
603 struct sk_buff *skb, u8 ap_ht_param,
604 struct ieee80211_supported_band *sband,
605 struct ieee80211_channel *channel,
606 enum ieee80211_smps_mode smps,
607 ieee80211_conn_flags_t conn_flags)
610 u32 flags = channel->flags;
612 struct ieee80211_sta_ht_cap ht_cap;
614 BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
616 memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
617 ieee80211_apply_htcap_overrides(sdata, &ht_cap);
619 /* determine capability flags */
622 switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
623 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
624 if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
625 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
626 cap &= ~IEEE80211_HT_CAP_SGI_40;
629 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
630 if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
631 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
632 cap &= ~IEEE80211_HT_CAP_SGI_40;
638 * If 40 MHz was disabled associate as though we weren't
639 * capable of 40 MHz -- some broken APs will never fall
640 * back to trying to transmit in 20 MHz.
642 if (conn_flags & IEEE80211_CONN_DISABLE_40MHZ) {
643 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
644 cap &= ~IEEE80211_HT_CAP_SGI_40;
647 /* set SM PS mode properly */
648 cap &= ~IEEE80211_HT_CAP_SM_PS;
650 case IEEE80211_SMPS_AUTOMATIC:
651 case IEEE80211_SMPS_NUM_MODES:
654 case IEEE80211_SMPS_OFF:
655 cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
656 IEEE80211_HT_CAP_SM_PS_SHIFT;
658 case IEEE80211_SMPS_STATIC:
659 cap |= WLAN_HT_CAP_SM_PS_STATIC <<
660 IEEE80211_HT_CAP_SM_PS_SHIFT;
662 case IEEE80211_SMPS_DYNAMIC:
663 cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
664 IEEE80211_HT_CAP_SM_PS_SHIFT;
668 /* reserve and fill IE */
669 pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
670 ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
673 /* This function determines vht capability flags for the association
675 * Note - the function returns true to own the MU-MIMO capability
677 static bool ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
679 struct ieee80211_supported_band *sband,
680 struct ieee80211_vht_cap *ap_vht_cap,
681 ieee80211_conn_flags_t conn_flags)
683 struct ieee80211_local *local = sdata->local;
686 struct ieee80211_sta_vht_cap vht_cap;
687 u32 mask, ap_bf_sts, our_bf_sts;
688 bool mu_mimo_owner = false;
690 BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
692 memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
693 ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
695 /* determine capability flags */
698 if (conn_flags & IEEE80211_CONN_DISABLE_80P80MHZ) {
699 u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
701 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
702 if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
703 bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
704 cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
707 if (conn_flags & IEEE80211_CONN_DISABLE_160MHZ) {
708 cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
709 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
713 * Some APs apparently get confused if our capabilities are better
714 * than theirs, so restrict what we advertise in the assoc request.
716 if (!(ap_vht_cap->vht_cap_info &
717 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
718 cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
719 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
720 else if (!(ap_vht_cap->vht_cap_info &
721 cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
722 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
725 * If some other vif is using the MU-MIMO capability we cannot associate
726 * using MU-MIMO - this will lead to contradictions in the group-id
728 * Ownership is defined since association request, in order to avoid
729 * simultaneous associations with MU-MIMO.
731 if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) {
732 bool disable_mu_mimo = false;
733 struct ieee80211_sub_if_data *other;
735 list_for_each_entry_rcu(other, &local->interfaces, list) {
736 if (other->vif.bss_conf.mu_mimo_owner) {
737 disable_mu_mimo = true;
742 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
744 mu_mimo_owner = true;
747 mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
749 ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
750 our_bf_sts = cap & mask;
752 if (ap_bf_sts < our_bf_sts) {
757 /* reserve and fill IE */
758 pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
759 ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
761 return mu_mimo_owner;
764 /* This function determines HE capability flags for the association
767 static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata,
769 struct ieee80211_supported_band *sband,
770 enum ieee80211_smps_mode smps_mode,
771 ieee80211_conn_flags_t conn_flags)
773 u8 *pos, *pre_he_pos;
774 const struct ieee80211_sta_he_cap *he_cap;
777 he_cap = ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif);
778 if (WARN_ON(!he_cap))
781 /* get a max size estimate */
783 2 + 1 + sizeof(he_cap->he_cap_elem) +
784 ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) +
785 ieee80211_he_ppe_size(he_cap->ppe_thres[0],
786 he_cap->he_cap_elem.phy_cap_info);
787 pos = skb_put(skb, he_cap_size);
789 pos = ieee80211_ie_build_he_cap(conn_flags,
790 pos, he_cap, pos + he_cap_size);
791 /* trim excess if any */
792 skb_trim(skb, skb->len - (pre_he_pos + he_cap_size - pos));
794 ieee80211_ie_build_he_6ghz_cap(sdata, smps_mode, skb);
797 static void ieee80211_add_eht_ie(struct ieee80211_sub_if_data *sdata,
799 struct ieee80211_supported_band *sband)
802 const struct ieee80211_sta_he_cap *he_cap;
803 const struct ieee80211_sta_eht_cap *eht_cap;
806 he_cap = ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif);
807 eht_cap = ieee80211_get_eht_iftype_cap_vif(sband, &sdata->vif);
810 * EHT capabilities element is only added if the HE capabilities element
811 * was added so assume that 'he_cap' is valid and don't check it.
813 if (WARN_ON(!he_cap || !eht_cap))
817 2 + 1 + sizeof(eht_cap->eht_cap_elem) +
818 ieee80211_eht_mcs_nss_size(&he_cap->he_cap_elem,
819 &eht_cap->eht_cap_elem,
821 ieee80211_eht_ppe_size(eht_cap->eht_ppe_thres[0],
822 eht_cap->eht_cap_elem.phy_cap_info);
823 pos = skb_put(skb, eht_cap_size);
824 ieee80211_ie_build_eht_cap(pos, he_cap, eht_cap, pos + eht_cap_size,
828 static void ieee80211_assoc_add_rates(struct sk_buff *skb,
829 enum nl80211_chan_width width,
830 struct ieee80211_supported_band *sband,
831 struct ieee80211_mgd_assoc_data *assoc_data)
833 unsigned int shift = ieee80211_chanwidth_get_shift(width);
834 unsigned int rates_len, supp_rates_len;
839 if (assoc_data->supp_rates_len) {
841 * Get all rates supported by the device and the AP as
842 * some APs don't like getting a superset of their rates
843 * in the association request (e.g. D-Link DAP 1353 in
846 rates_len = ieee80211_parse_bitrates(width, sband,
847 assoc_data->supp_rates,
848 assoc_data->supp_rates_len,
852 * In case AP not provide any supported rates information
853 * before association, we send information element(s) with
854 * all rates that we support.
856 rates_len = sband->n_bitrates;
857 for (i = 0; i < sband->n_bitrates; i++)
861 supp_rates_len = rates_len;
862 if (supp_rates_len > 8)
865 pos = skb_put(skb, supp_rates_len + 2);
866 *pos++ = WLAN_EID_SUPP_RATES;
867 *pos++ = supp_rates_len;
870 for (i = 0; i < sband->n_bitrates; i++) {
871 if (BIT(i) & rates) {
872 int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
880 if (rates_len > count) {
881 pos = skb_put(skb, rates_len - count + 2);
882 *pos++ = WLAN_EID_EXT_SUPP_RATES;
883 *pos++ = rates_len - count;
885 for (i++; i < sband->n_bitrates; i++) {
886 if (BIT(i) & rates) {
889 rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
897 static size_t ieee80211_add_before_ht_elems(struct sk_buff *skb,
904 static const u8 before_ht[] = {
907 WLAN_EID_EXT_SUPP_RATES,
908 WLAN_EID_PWR_CAPABILITY,
909 WLAN_EID_SUPPORTED_CHANNELS,
912 WLAN_EID_RRM_ENABLED_CAPABILITIES,
913 WLAN_EID_MOBILITY_DOMAIN,
914 WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */
915 WLAN_EID_RIC_DATA, /* reassoc only */
916 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
918 static const u8 after_ric[] = {
919 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
920 WLAN_EID_HT_CAPABILITY,
921 WLAN_EID_BSS_COEX_2040,
922 /* luckily this is almost always there */
923 WLAN_EID_EXT_CAPABILITY,
924 WLAN_EID_QOS_TRAFFIC_CAPA,
925 WLAN_EID_TIM_BCAST_REQ,
926 WLAN_EID_INTERWORKING,
927 /* 60 GHz (Multi-band, DMG, MMS) can't happen */
928 WLAN_EID_VHT_CAPABILITY,
929 WLAN_EID_OPMODE_NOTIF,
935 noffset = ieee80211_ie_split_ric(elems, elems_len,
937 ARRAY_SIZE(before_ht),
939 ARRAY_SIZE(after_ric),
941 skb_put_data(skb, elems + offset, noffset - offset);
946 static size_t ieee80211_add_before_vht_elems(struct sk_buff *skb,
951 static const u8 before_vht[] = {
953 * no need to list the ones split off before HT
956 WLAN_EID_BSS_COEX_2040,
957 WLAN_EID_EXT_CAPABILITY,
958 WLAN_EID_QOS_TRAFFIC_CAPA,
959 WLAN_EID_TIM_BCAST_REQ,
960 WLAN_EID_INTERWORKING,
961 /* 60 GHz (Multi-band, DMG, MMS) can't happen */
968 /* RIC already taken care of in ieee80211_add_before_ht_elems() */
969 noffset = ieee80211_ie_split(elems, elems_len,
970 before_vht, ARRAY_SIZE(before_vht),
972 skb_put_data(skb, elems + offset, noffset - offset);
977 static size_t ieee80211_add_before_he_elems(struct sk_buff *skb,
982 static const u8 before_he[] = {
984 * no need to list the ones split off before VHT
987 WLAN_EID_OPMODE_NOTIF,
988 WLAN_EID_EXTENSION, WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE,
990 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_SESSION,
991 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_PUBLIC_KEY,
992 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_KEY_CONFIRM,
993 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_HLP_CONTAINER,
994 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN,
995 /* TODO: add 11ah/11aj/11ak elements */
1002 /* RIC already taken care of in ieee80211_add_before_ht_elems() */
1003 noffset = ieee80211_ie_split(elems, elems_len,
1004 before_he, ARRAY_SIZE(before_he),
1006 skb_put_data(skb, elems + offset, noffset - offset);
1011 #define PRESENT_ELEMS_MAX 8
1012 #define PRESENT_ELEM_EXT_OFFS 0x100
1014 static void ieee80211_assoc_add_ml_elem(struct ieee80211_sub_if_data *sdata,
1015 struct sk_buff *skb, u16 capab,
1016 const struct element *ext_capa,
1017 const u16 *present_elems);
1019 static size_t ieee80211_assoc_link_elems(struct ieee80211_sub_if_data *sdata,
1020 struct sk_buff *skb, u16 *capab,
1021 const struct element *ext_capa,
1022 const u8 *extra_elems,
1023 size_t extra_elems_len,
1024 unsigned int link_id,
1025 struct ieee80211_link_data *link,
1028 enum nl80211_iftype iftype = ieee80211_vif_type_p2p(&sdata->vif);
1029 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1030 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
1031 struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
1032 struct ieee80211_channel *chan = cbss->channel;
1033 const struct ieee80211_sband_iftype_data *iftd;
1034 struct ieee80211_local *local = sdata->local;
1035 struct ieee80211_supported_band *sband;
1036 enum nl80211_chan_width width = NL80211_CHAN_WIDTH_20;
1037 struct ieee80211_chanctx_conf *chanctx_conf;
1038 enum ieee80211_smps_mode smps_mode;
1039 u16 orig_capab = *capab;
1041 int present_elems_len = 0;
1045 #define ADD_PRESENT_ELEM(id) do { \
1046 /* need a last for termination - we use 0 == SSID */ \
1047 if (!WARN_ON(present_elems_len >= PRESENT_ELEMS_MAX - 1)) \
1048 present_elems[present_elems_len++] = (id); \
1050 #define ADD_PRESENT_EXT_ELEM(id) ADD_PRESENT_ELEM(PRESENT_ELEM_EXT_OFFS | (id))
1053 smps_mode = link->smps_mode;
1054 else if (sdata->u.mgd.powersave)
1055 smps_mode = IEEE80211_SMPS_DYNAMIC;
1057 smps_mode = IEEE80211_SMPS_OFF;
1061 * 5/10 MHz scenarios are only viable without MLO, in which
1062 * case this pointer should be used ... All of this is a bit
1063 * unclear though, not sure this even works at all.
1066 chanctx_conf = rcu_dereference(link->conf->chanctx_conf);
1068 width = chanctx_conf->def.width;
1072 sband = local->hw.wiphy->bands[chan->band];
1073 iftd = ieee80211_get_sband_iftype_data(sband, iftype);
1075 if (sband->band == NL80211_BAND_2GHZ) {
1076 *capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
1077 *capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
1080 if ((cbss->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
1081 ieee80211_hw_check(&local->hw, SPECTRUM_MGMT))
1082 *capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
1084 if (sband->band != NL80211_BAND_S1GHZ)
1085 ieee80211_assoc_add_rates(skb, width, sband, assoc_data);
1087 if (*capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
1088 *capab & WLAN_CAPABILITY_RADIO_MEASURE) {
1089 struct cfg80211_chan_def chandef = {
1094 pos = skb_put(skb, 4);
1095 *pos++ = WLAN_EID_PWR_CAPABILITY;
1097 *pos++ = 0; /* min tx power */
1099 *pos++ = ieee80211_chandef_max_power(&chandef);
1100 ADD_PRESENT_ELEM(WLAN_EID_PWR_CAPABILITY);
1104 * Per spec, we shouldn't include the list of channels if we advertise
1105 * support for extended channel switching, but we've always done that;
1106 * (for now?) apply this restriction only on the (new) 6 GHz band.
1108 if (*capab & WLAN_CAPABILITY_SPECTRUM_MGMT &&
1109 (sband->band != NL80211_BAND_6GHZ ||
1110 !ext_capa || ext_capa->datalen < 1 ||
1111 !(ext_capa->data[0] & WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING))) {
1112 /* TODO: get this in reg domain format */
1113 pos = skb_put(skb, 2 * sband->n_channels + 2);
1114 *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
1115 *pos++ = 2 * sband->n_channels;
1116 for (i = 0; i < sband->n_channels; i++) {
1117 int cf = sband->channels[i].center_freq;
1119 *pos++ = ieee80211_frequency_to_channel(cf);
1120 *pos++ = 1; /* one channel in the subband*/
1122 ADD_PRESENT_ELEM(WLAN_EID_SUPPORTED_CHANNELS);
1125 /* if present, add any custom IEs that go before HT */
1126 offset = ieee80211_add_before_ht_elems(skb, extra_elems,
1130 if (sband->band != NL80211_BAND_6GHZ &&
1131 !(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HT)) {
1132 ieee80211_add_ht_ie(sdata, skb,
1133 assoc_data->link[link_id].ap_ht_param,
1134 sband, chan, smps_mode,
1135 assoc_data->link[link_id].conn_flags);
1136 ADD_PRESENT_ELEM(WLAN_EID_HT_CAPABILITY);
1139 /* if present, add any custom IEs that go before VHT */
1140 offset = ieee80211_add_before_vht_elems(skb, extra_elems,
1144 if (sband->band != NL80211_BAND_6GHZ &&
1145 !(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_VHT)) {
1146 bool mu_mimo_owner =
1147 ieee80211_add_vht_ie(sdata, skb, sband,
1148 &assoc_data->link[link_id].ap_vht_cap,
1149 assoc_data->link[link_id].conn_flags);
1152 link->conf->mu_mimo_owner = mu_mimo_owner;
1153 ADD_PRESENT_ELEM(WLAN_EID_VHT_CAPABILITY);
1157 * If AP doesn't support HT, mark HE and EHT as disabled.
1158 * If on the 5GHz band, make sure it supports VHT.
1160 if (assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HT ||
1161 (sband->band == NL80211_BAND_5GHZ &&
1162 assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_VHT))
1163 assoc_data->link[link_id].conn_flags |=
1164 IEEE80211_CONN_DISABLE_HE |
1165 IEEE80211_CONN_DISABLE_EHT;
1167 /* if present, add any custom IEs that go before HE */
1168 offset = ieee80211_add_before_he_elems(skb, extra_elems,
1172 if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HE)) {
1173 ieee80211_add_he_ie(sdata, skb, sband, smps_mode,
1174 assoc_data->link[link_id].conn_flags);
1175 ADD_PRESENT_EXT_ELEM(WLAN_EID_EXT_HE_CAPABILITY);
1179 * careful - need to know about all the present elems before
1180 * calling ieee80211_assoc_add_ml_elem(), so add this one if
1181 * we're going to put it after the ML element
1183 if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_EHT))
1184 ADD_PRESENT_EXT_ELEM(WLAN_EID_EXT_EHT_CAPABILITY);
1186 if (link_id == assoc_data->assoc_link_id)
1187 ieee80211_assoc_add_ml_elem(sdata, skb, orig_capab, ext_capa,
1190 /* crash if somebody gets it wrong */
1191 present_elems = NULL;
1193 if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_EHT))
1194 ieee80211_add_eht_ie(sdata, skb, sband);
1196 if (sband->band == NL80211_BAND_S1GHZ) {
1197 ieee80211_add_aid_request_ie(sdata, skb);
1198 ieee80211_add_s1g_capab_ie(sdata, &sband->s1g_cap, skb);
1201 if (iftd && iftd->vendor_elems.data && iftd->vendor_elems.len)
1202 skb_put_data(skb, iftd->vendor_elems.data, iftd->vendor_elems.len);
1205 link->u.mgd.conn_flags = assoc_data->link[link_id].conn_flags;
1210 static void ieee80211_add_non_inheritance_elem(struct sk_buff *skb,
1214 unsigned int skb_len = skb->len;
1215 bool at_extension = false;
1218 u8 *len, *list_len = NULL;
1220 skb_put_u8(skb, WLAN_EID_EXTENSION);
1221 len = skb_put(skb, 1);
1222 skb_put_u8(skb, WLAN_EID_EXT_NON_INHERITANCE);
1224 for (i = 0; i < PRESENT_ELEMS_MAX && outer[i]; i++) {
1225 u16 elem = outer[i];
1226 bool have_inner = false;
1228 /* should at least be sorted in the sense of normal -> ext */
1229 WARN_ON(at_extension && elem < PRESENT_ELEM_EXT_OFFS);
1231 /* switch to extension list */
1232 if (!at_extension && elem >= PRESENT_ELEM_EXT_OFFS) {
1233 at_extension = true;
1239 for (j = 0; j < PRESENT_ELEMS_MAX && inner[j]; j++) {
1240 if (elem == inner[j]) {
1250 list_len = skb_put(skb, 1);
1254 skb_put_u8(skb, (u8)elem);
1258 /* if we added a list but no extension list, make a zero-len one */
1259 if (added && (!at_extension || !list_len))
1262 /* if nothing added remove extension element completely */
1264 skb_trim(skb, skb_len);
1266 *len = skb->len - skb_len - 2;
1269 static void ieee80211_assoc_add_ml_elem(struct ieee80211_sub_if_data *sdata,
1270 struct sk_buff *skb, u16 capab,
1271 const struct element *ext_capa,
1272 const u16 *outer_present_elems)
1274 struct ieee80211_local *local = sdata->local;
1275 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1276 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
1277 struct ieee80211_multi_link_elem *ml_elem;
1278 struct ieee80211_mle_basic_common_info *common;
1279 const struct wiphy_iftype_ext_capab *ift_ext_capa;
1280 __le16 eml_capa = 0, mld_capa_ops = 0;
1281 unsigned int link_id;
1285 if (!ieee80211_vif_is_mld(&sdata->vif))
1288 ift_ext_capa = cfg80211_get_iftype_ext_capa(local->hw.wiphy,
1289 ieee80211_vif_type_p2p(&sdata->vif));
1291 eml_capa = cpu_to_le16(ift_ext_capa->eml_capabilities);
1292 mld_capa_ops = cpu_to_le16(ift_ext_capa->mld_capa_and_ops);
1295 skb_put_u8(skb, WLAN_EID_EXTENSION);
1296 ml_elem_len = skb_put(skb, 1);
1297 skb_put_u8(skb, WLAN_EID_EXT_EHT_MULTI_LINK);
1298 ml_elem = skb_put(skb, sizeof(*ml_elem));
1300 cpu_to_le16(IEEE80211_ML_CONTROL_TYPE_BASIC |
1301 IEEE80211_MLC_BASIC_PRES_MLD_CAPA_OP);
1302 common = skb_put(skb, sizeof(*common));
1303 common->len = sizeof(*common) +
1304 2; /* MLD capa/ops */
1305 memcpy(common->mld_mac_addr, sdata->vif.addr, ETH_ALEN);
1307 /* add EML_CAPA only if needed, see Draft P802.11be_D2.1, 35.3.17 */
1309 cpu_to_le16((IEEE80211_EML_CAP_EMLSR_SUPP |
1310 IEEE80211_EML_CAP_EMLMR_SUPPORT))) {
1311 common->len += 2; /* EML capabilities */
1313 cpu_to_le16(IEEE80211_MLC_BASIC_PRES_EML_CAPA);
1314 skb_put_data(skb, &eml_capa, sizeof(eml_capa));
1316 /* need indication from userspace to support this */
1317 mld_capa_ops &= ~cpu_to_le16(IEEE80211_MLD_CAP_OP_TID_TO_LINK_MAP_NEG_SUPP);
1318 skb_put_data(skb, &mld_capa_ops, sizeof(mld_capa_ops));
1320 for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
1321 u16 link_present_elems[PRESENT_ELEMS_MAX] = {};
1322 const u8 *extra_elems;
1323 size_t extra_elems_len;
1325 u8 *subelem_len = NULL;
1328 if (!assoc_data->link[link_id].bss ||
1329 link_id == assoc_data->assoc_link_id)
1332 extra_elems = assoc_data->link[link_id].elems;
1333 extra_elems_len = assoc_data->link[link_id].elems_len;
1335 skb_put_u8(skb, IEEE80211_MLE_SUBELEM_PER_STA_PROFILE);
1336 subelem_len = skb_put(skb, 1);
1338 ctrl = cpu_to_le16(link_id |
1339 IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE |
1340 IEEE80211_MLE_STA_CONTROL_STA_MAC_ADDR_PRESENT);
1341 skb_put_data(skb, &ctrl, sizeof(ctrl));
1342 skb_put_u8(skb, 1 + ETH_ALEN); /* STA Info Length */
1343 skb_put_data(skb, assoc_data->link[link_id].addr,
1346 * Now add the contents of the (re)association request,
1347 * but the "listen interval" and "current AP address"
1348 * (if applicable) are skipped. So we only have
1349 * the capability field (remember the position and fill
1350 * later), followed by the elements added below by
1351 * calling ieee80211_assoc_link_elems().
1353 capab_pos = skb_put(skb, 2);
1355 extra_used = ieee80211_assoc_link_elems(sdata, skb, &capab,
1360 link_present_elems);
1362 skb_put_data(skb, extra_elems + extra_used,
1363 extra_elems_len - extra_used);
1365 put_unaligned_le16(capab, capab_pos);
1367 ieee80211_add_non_inheritance_elem(skb, outer_present_elems,
1368 link_present_elems);
1370 ieee80211_fragment_element(skb, subelem_len,
1371 IEEE80211_MLE_SUBELEM_FRAGMENT);
1374 ieee80211_fragment_element(skb, ml_elem_len, WLAN_EID_FRAGMENT);
1377 static int ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
1379 struct ieee80211_local *local = sdata->local;
1380 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1381 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
1382 struct ieee80211_link_data *link;
1383 struct sk_buff *skb;
1384 struct ieee80211_mgmt *mgmt;
1385 u8 *pos, qos_info, *ie_start;
1386 size_t offset, noffset;
1387 u16 capab = WLAN_CAPABILITY_ESS, link_capab;
1389 struct element *ext_capa = NULL;
1390 enum nl80211_iftype iftype = ieee80211_vif_type_p2p(&sdata->vif);
1391 struct ieee80211_prep_tx_info info = {};
1392 unsigned int link_id, n_links = 0;
1393 u16 present_elems[PRESENT_ELEMS_MAX] = {};
1398 /* we know it's writable, cast away the const */
1399 if (assoc_data->ie_len)
1400 ext_capa = (void *)cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY,
1402 assoc_data->ie_len);
1404 sdata_assert_lock(sdata);
1406 size = local->hw.extra_tx_headroom +
1407 sizeof(*mgmt) + /* bit too much but doesn't matter */
1408 2 + assoc_data->ssid_len + /* SSID */
1409 assoc_data->ie_len + /* extra IEs */
1410 (assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) +
1413 for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
1414 struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
1415 const struct ieee80211_sband_iftype_data *iftd;
1416 struct ieee80211_supported_band *sband;
1421 sband = local->hw.wiphy->bands[cbss->channel->band];
1424 /* add STA profile elements length */
1425 size += assoc_data->link[link_id].elems_len;
1426 /* and supported rates length */
1427 size += 4 + sband->n_bitrates;
1428 /* supported channels */
1429 size += 2 + 2 * sband->n_channels;
1431 iftd = ieee80211_get_sband_iftype_data(sband, iftype);
1433 size += iftd->vendor_elems.len;
1435 /* power capability */
1438 /* HT, VHT, HE, EHT */
1439 size += 2 + sizeof(struct ieee80211_ht_cap);
1440 size += 2 + sizeof(struct ieee80211_vht_cap);
1441 size += 2 + 1 + sizeof(struct ieee80211_he_cap_elem) +
1442 sizeof(struct ieee80211_he_mcs_nss_supp) +
1443 IEEE80211_HE_PPE_THRES_MAX_LEN;
1445 if (sband->band == NL80211_BAND_6GHZ)
1446 size += 2 + 1 + sizeof(struct ieee80211_he_6ghz_capa);
1448 size += 2 + 1 + sizeof(struct ieee80211_eht_cap_elem) +
1449 sizeof(struct ieee80211_eht_mcs_nss_supp) +
1450 IEEE80211_EHT_PPE_THRES_MAX_LEN;
1452 /* non-inheritance element */
1453 size += 2 + 2 + PRESENT_ELEMS_MAX;
1455 /* should be the same across all BSSes */
1456 if (cbss->capability & WLAN_CAPABILITY_PRIVACY)
1457 capab |= WLAN_CAPABILITY_PRIVACY;
1460 if (ieee80211_vif_is_mld(&sdata->vif)) {
1461 /* consider the multi-link element with STA profile */
1462 size += sizeof(struct ieee80211_multi_link_elem);
1463 /* max common info field in basic multi-link element */
1464 size += sizeof(struct ieee80211_mle_basic_common_info) +
1469 * The capability elements were already considered above;
1470 * note this over-estimates a bit because there's no
1471 * STA profile for the assoc link.
1473 size += (n_links - 1) *
1474 (1 + 1 + /* subelement ID/length */
1475 2 + /* STA control */
1476 1 + ETH_ALEN + 2 /* STA Info field */);
1479 link = sdata_dereference(sdata->link[assoc_data->assoc_link_id], sdata);
1483 if (WARN_ON(!assoc_data->link[assoc_data->assoc_link_id].bss))
1486 skb = alloc_skb(size, GFP_KERNEL);
1490 skb_reserve(skb, local->hw.extra_tx_headroom);
1492 if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
1493 capab |= WLAN_CAPABILITY_RADIO_MEASURE;
1495 /* Set MBSSID support for HE AP if needed */
1496 if (ieee80211_hw_check(&local->hw, SUPPORTS_ONLY_HE_MULTI_BSSID) &&
1497 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
1498 ext_capa && ext_capa->datalen >= 3)
1499 ext_capa->data[2] |= WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT;
1501 mgmt = skb_put_zero(skb, 24);
1502 memcpy(mgmt->da, sdata->vif.cfg.ap_addr, ETH_ALEN);
1503 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
1504 memcpy(mgmt->bssid, sdata->vif.cfg.ap_addr, ETH_ALEN);
1506 listen_int = cpu_to_le16(assoc_data->s1g ?
1507 ieee80211_encode_usf(local->hw.conf.listen_interval) :
1508 local->hw.conf.listen_interval);
1509 if (!is_zero_ether_addr(assoc_data->prev_ap_addr)) {
1511 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1512 IEEE80211_STYPE_REASSOC_REQ);
1513 capab_pos = &mgmt->u.reassoc_req.capab_info;
1514 mgmt->u.reassoc_req.listen_interval = listen_int;
1515 memcpy(mgmt->u.reassoc_req.current_ap,
1516 assoc_data->prev_ap_addr, ETH_ALEN);
1517 info.subtype = IEEE80211_STYPE_REASSOC_REQ;
1520 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
1521 IEEE80211_STYPE_ASSOC_REQ);
1522 capab_pos = &mgmt->u.assoc_req.capab_info;
1523 mgmt->u.assoc_req.listen_interval = listen_int;
1524 info.subtype = IEEE80211_STYPE_ASSOC_REQ;
1528 pos = skb_put(skb, 2 + assoc_data->ssid_len);
1530 *pos++ = WLAN_EID_SSID;
1531 *pos++ = assoc_data->ssid_len;
1532 memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
1534 /* add the elements for the assoc (main) link */
1536 offset = ieee80211_assoc_link_elems(sdata, skb, &link_capab,
1540 assoc_data->assoc_link_id, link,
1542 put_unaligned_le16(link_capab, capab_pos);
1544 /* if present, add any custom non-vendor IEs */
1545 if (assoc_data->ie_len) {
1546 noffset = ieee80211_ie_split_vendor(assoc_data->ie,
1549 skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
1553 if (assoc_data->wmm) {
1554 if (assoc_data->uapsd) {
1555 qos_info = ifmgd->uapsd_queues;
1556 qos_info |= (ifmgd->uapsd_max_sp_len <<
1557 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
1562 pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
1565 /* add any remaining custom (i.e. vendor specific here) IEs */
1566 if (assoc_data->ie_len) {
1567 noffset = assoc_data->ie_len;
1568 skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
1571 if (assoc_data->fils_kek_len) {
1572 ret = fils_encrypt_assoc_req(skb, assoc_data);
1579 pos = skb_tail_pointer(skb);
1580 kfree(ifmgd->assoc_req_ies);
1581 ifmgd->assoc_req_ies = kmemdup(ie_start, pos - ie_start, GFP_ATOMIC);
1582 if (!ifmgd->assoc_req_ies) {
1587 ifmgd->assoc_req_ies_len = pos - ie_start;
1589 drv_mgd_prepare_tx(local, sdata, &info);
1591 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1592 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1593 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
1594 IEEE80211_TX_INTFL_MLME_CONN_TX;
1595 ieee80211_tx_skb(sdata, skb);
1600 void ieee80211_send_pspoll(struct ieee80211_local *local,
1601 struct ieee80211_sub_if_data *sdata)
1603 struct ieee80211_pspoll *pspoll;
1604 struct sk_buff *skb;
1606 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
1610 pspoll = (struct ieee80211_pspoll *) skb->data;
1611 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1613 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1614 ieee80211_tx_skb(sdata, skb);
1617 void ieee80211_send_nullfunc(struct ieee80211_local *local,
1618 struct ieee80211_sub_if_data *sdata,
1621 struct sk_buff *skb;
1622 struct ieee80211_hdr_3addr *nullfunc;
1623 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1625 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif, -1,
1626 !ieee80211_hw_check(&local->hw,
1627 DOESNT_SUPPORT_QOS_NDP));
1631 nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
1633 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1635 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
1636 IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
1638 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1639 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
1641 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
1642 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
1644 ieee80211_tx_skb(sdata, skb);
1647 void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
1648 struct ieee80211_sub_if_data *sdata)
1650 struct sk_buff *skb;
1651 struct ieee80211_hdr *nullfunc;
1654 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
1657 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
1661 skb_reserve(skb, local->hw.extra_tx_headroom);
1663 nullfunc = skb_put_zero(skb, 30);
1664 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
1665 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
1666 nullfunc->frame_control = fc;
1667 memcpy(nullfunc->addr1, sdata->deflink.u.mgd.bssid, ETH_ALEN);
1668 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
1669 memcpy(nullfunc->addr3, sdata->deflink.u.mgd.bssid, ETH_ALEN);
1670 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
1672 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1673 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
1674 ieee80211_tx_skb(sdata, skb);
1677 /* spectrum management related things */
1678 static void ieee80211_chswitch_work(struct wiphy *wiphy,
1679 struct wiphy_work *work)
1681 struct ieee80211_link_data *link =
1682 container_of(work, struct ieee80211_link_data,
1683 u.mgd.chswitch_work.work);
1684 struct ieee80211_sub_if_data *sdata = link->sdata;
1685 struct ieee80211_local *local = sdata->local;
1686 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1689 if (!ieee80211_sdata_running(sdata))
1693 mutex_lock(&local->mtx);
1694 mutex_lock(&local->chanctx_mtx);
1696 if (!ifmgd->associated)
1699 if (!link->conf->csa_active)
1703 * using reservation isn't immediate as it may be deferred until later
1704 * with multi-vif. once reservation is complete it will re-schedule the
1705 * work with no reserved_chanctx so verify chandef to check if it
1706 * completed successfully
1709 if (link->reserved_chanctx) {
1711 * with multi-vif csa driver may call ieee80211_csa_finish()
1712 * many times while waiting for other interfaces to use their
1715 if (link->reserved_ready)
1718 ret = ieee80211_link_use_reserved_context(link);
1721 "failed to use reserved channel context, disconnecting (err=%d)\n",
1723 wiphy_work_queue(sdata->local->hw.wiphy,
1724 &ifmgd->csa_connection_drop_work);
1731 if (!cfg80211_chandef_identical(&link->conf->chandef,
1732 &link->csa_chandef)) {
1734 "failed to finalize channel switch, disconnecting\n");
1735 wiphy_work_queue(sdata->local->hw.wiphy,
1736 &ifmgd->csa_connection_drop_work);
1740 link->u.mgd.csa_waiting_bcn = true;
1742 ieee80211_sta_reset_beacon_monitor(sdata);
1743 ieee80211_sta_reset_conn_monitor(sdata);
1746 mutex_unlock(&local->chanctx_mtx);
1747 mutex_unlock(&local->mtx);
1748 sdata_unlock(sdata);
1751 static void ieee80211_chswitch_post_beacon(struct ieee80211_link_data *link)
1753 struct ieee80211_sub_if_data *sdata = link->sdata;
1754 struct ieee80211_local *local = sdata->local;
1755 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1758 sdata_assert_lock(sdata);
1760 WARN_ON(!link->conf->csa_active);
1762 if (link->csa_block_tx) {
1763 ieee80211_wake_vif_queues(local, sdata,
1764 IEEE80211_QUEUE_STOP_REASON_CSA);
1765 link->csa_block_tx = false;
1768 link->conf->csa_active = false;
1769 link->u.mgd.csa_waiting_bcn = false;
1771 * If the CSA IE is still present on the beacon after the switch,
1772 * we need to consider it as a new CSA (possibly to self).
1774 link->u.mgd.beacon_crc_valid = false;
1776 ret = drv_post_channel_switch(sdata);
1779 "driver post channel switch failed, disconnecting\n");
1780 wiphy_work_queue(sdata->local->hw.wiphy,
1781 &ifmgd->csa_connection_drop_work);
1785 cfg80211_ch_switch_notify(sdata->dev, &link->reserved_chandef, 0, 0);
1788 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
1790 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1791 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1793 if (WARN_ON(ieee80211_vif_is_mld(&sdata->vif)))
1796 trace_api_chswitch_done(sdata, success);
1799 "driver channel switch failed, disconnecting\n");
1800 wiphy_work_queue(sdata->local->hw.wiphy,
1801 &ifmgd->csa_connection_drop_work);
1803 wiphy_delayed_work_queue(sdata->local->hw.wiphy,
1804 &sdata->deflink.u.mgd.chswitch_work,
1808 EXPORT_SYMBOL(ieee80211_chswitch_done);
1811 ieee80211_sta_abort_chanswitch(struct ieee80211_link_data *link)
1813 struct ieee80211_sub_if_data *sdata = link->sdata;
1814 struct ieee80211_local *local = sdata->local;
1816 if (!local->ops->abort_channel_switch)
1819 mutex_lock(&local->mtx);
1821 mutex_lock(&local->chanctx_mtx);
1822 ieee80211_link_unreserve_chanctx(link);
1823 mutex_unlock(&local->chanctx_mtx);
1825 if (link->csa_block_tx)
1826 ieee80211_wake_vif_queues(local, sdata,
1827 IEEE80211_QUEUE_STOP_REASON_CSA);
1829 link->csa_block_tx = false;
1830 link->conf->csa_active = false;
1832 mutex_unlock(&local->mtx);
1834 drv_abort_channel_switch(sdata);
1838 ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link,
1839 u64 timestamp, u32 device_timestamp,
1840 struct ieee802_11_elems *elems,
1843 struct ieee80211_sub_if_data *sdata = link->sdata;
1844 struct ieee80211_local *local = sdata->local;
1845 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1846 struct cfg80211_bss *cbss = link->u.mgd.bss;
1847 struct ieee80211_chanctx_conf *conf;
1848 struct ieee80211_chanctx *chanctx;
1849 enum nl80211_band current_band;
1850 struct ieee80211_csa_ie csa_ie;
1851 struct ieee80211_channel_switch ch_switch;
1852 struct ieee80211_bss *bss;
1853 unsigned long timeout;
1856 sdata_assert_lock(sdata);
1861 current_band = cbss->channel->band;
1862 bss = (void *)cbss->priv;
1863 res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
1865 link->u.mgd.conn_flags,
1866 link->u.mgd.bssid, &csa_ie);
1869 ch_switch.timestamp = timestamp;
1870 ch_switch.device_timestamp = device_timestamp;
1871 ch_switch.block_tx = csa_ie.mode;
1872 ch_switch.chandef = csa_ie.chandef;
1873 ch_switch.count = csa_ie.count;
1874 ch_switch.delay = csa_ie.max_switch_time;
1878 goto lock_and_drop_connection;
1880 if (beacon && link->conf->csa_active &&
1881 !link->u.mgd.csa_waiting_bcn) {
1883 ieee80211_sta_abort_chanswitch(link);
1885 drv_channel_switch_rx_beacon(sdata, &ch_switch);
1887 } else if (link->conf->csa_active || res) {
1888 /* disregard subsequent announcements if already processing */
1892 if (link->conf->chandef.chan->band !=
1893 csa_ie.chandef.chan->band) {
1895 "AP %pM switches to different band (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1897 csa_ie.chandef.chan->center_freq,
1898 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1899 csa_ie.chandef.center_freq2);
1900 goto lock_and_drop_connection;
1903 if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
1904 IEEE80211_CHAN_DISABLED)) {
1906 "AP %pM switches to unsupported channel "
1907 "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), "
1910 csa_ie.chandef.chan->center_freq,
1911 csa_ie.chandef.chan->freq_offset,
1912 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1913 csa_ie.chandef.freq1_offset,
1914 csa_ie.chandef.center_freq2);
1915 goto lock_and_drop_connection;
1918 if (cfg80211_chandef_identical(&csa_ie.chandef,
1919 &link->conf->chandef) &&
1920 (!csa_ie.mode || !beacon)) {
1921 if (link->u.mgd.csa_ignored_same_chan)
1924 "AP %pM tries to chanswitch to same channel, ignore\n",
1926 link->u.mgd.csa_ignored_same_chan = true;
1931 * Drop all TDLS peers - either we disconnect or move to a different
1932 * channel from this point on. There's no telling what our peer will do.
1933 * The TDLS WIDER_BW scenario is also problematic, as peers might now
1934 * have an incompatible wider chandef.
1936 ieee80211_teardown_tdls_peers(sdata);
1938 mutex_lock(&local->mtx);
1939 mutex_lock(&local->chanctx_mtx);
1940 conf = rcu_dereference_protected(link->conf->chanctx_conf,
1941 lockdep_is_held(&local->chanctx_mtx));
1944 "no channel context assigned to vif?, disconnecting\n");
1945 goto drop_connection;
1948 chanctx = container_of(conf, struct ieee80211_chanctx, conf);
1950 if (local->use_chanctx &&
1951 !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) {
1953 "driver doesn't support chan-switch with channel contexts\n");
1954 goto drop_connection;
1957 if (drv_pre_channel_switch(sdata, &ch_switch)) {
1959 "preparing for channel switch failed, disconnecting\n");
1960 goto drop_connection;
1963 res = ieee80211_link_reserve_chanctx(link, &csa_ie.chandef,
1964 chanctx->mode, false);
1967 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1969 goto drop_connection;
1971 mutex_unlock(&local->chanctx_mtx);
1973 link->conf->csa_active = true;
1974 link->csa_chandef = csa_ie.chandef;
1975 link->csa_block_tx = csa_ie.mode;
1976 link->u.mgd.csa_ignored_same_chan = false;
1977 link->u.mgd.beacon_crc_valid = false;
1979 if (link->csa_block_tx)
1980 ieee80211_stop_vif_queues(local, sdata,
1981 IEEE80211_QUEUE_STOP_REASON_CSA);
1982 mutex_unlock(&local->mtx);
1984 cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef,
1985 link->link_id, csa_ie.count,
1988 if (local->ops->channel_switch) {
1989 /* use driver's channel switch callback */
1990 drv_channel_switch(local, sdata, &ch_switch);
1994 /* channel switch handled in software */
1995 timeout = TU_TO_JIFFIES((max_t(int, csa_ie.count, 1) - 1) *
1996 cbss->beacon_interval);
1997 wiphy_delayed_work_queue(local->hw.wiphy,
1998 &link->u.mgd.chswitch_work,
2001 lock_and_drop_connection:
2002 mutex_lock(&local->mtx);
2003 mutex_lock(&local->chanctx_mtx);
2006 * This is just so that the disconnect flow will know that
2007 * we were trying to switch channel and failed. In case the
2008 * mode is 1 (we are not allowed to Tx), we will know not to
2009 * send a deauthentication frame. Those two fields will be
2010 * reset when the disconnection worker runs.
2012 link->conf->csa_active = true;
2013 link->csa_block_tx = csa_ie.mode;
2015 wiphy_work_queue(sdata->local->hw.wiphy,
2016 &ifmgd->csa_connection_drop_work);
2017 mutex_unlock(&local->chanctx_mtx);
2018 mutex_unlock(&local->mtx);
2022 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
2023 struct ieee80211_channel *channel,
2024 const u8 *country_ie, u8 country_ie_len,
2025 const u8 *pwr_constr_elem,
2026 int *chan_pwr, int *pwr_reduction)
2028 struct ieee80211_country_ie_triplet *triplet;
2029 int chan = ieee80211_frequency_to_channel(channel->center_freq);
2030 int i, chan_increment;
2031 bool have_chan_pwr = false;
2034 if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
2037 triplet = (void *)(country_ie + 3);
2038 country_ie_len -= 3;
2040 switch (channel->band) {
2044 case NL80211_BAND_2GHZ:
2045 case NL80211_BAND_60GHZ:
2046 case NL80211_BAND_LC:
2049 case NL80211_BAND_5GHZ:
2052 case NL80211_BAND_6GHZ:
2054 * In the 6 GHz band, the "maximum transmit power level"
2055 * field in the triplets is reserved, and thus will be
2056 * zero and we shouldn't use it to control TX power.
2057 * The actual TX power will be given in the transmit
2058 * power envelope element instead.
2064 while (country_ie_len >= 3) {
2065 u8 first_channel = triplet->chans.first_channel;
2067 if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
2070 for (i = 0; i < triplet->chans.num_channels; i++) {
2071 if (first_channel + i * chan_increment == chan) {
2072 have_chan_pwr = true;
2073 *chan_pwr = triplet->chans.max_power;
2082 country_ie_len -= 3;
2085 if (have_chan_pwr && pwr_constr_elem)
2086 *pwr_reduction = *pwr_constr_elem;
2090 return have_chan_pwr;
2093 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
2094 struct ieee80211_channel *channel,
2095 const u8 *cisco_dtpc_ie,
2098 /* From practical testing, the first data byte of the DTPC element
2099 * seems to contain the requested dBm level, and the CLI on Cisco
2100 * APs clearly state the range is -127 to 127 dBm, which indicates
2101 * a signed byte, although it seemingly never actually goes negative.
2102 * The other byte seems to always be zero.
2104 *pwr_level = (__s8)cisco_dtpc_ie[4];
2107 static u64 ieee80211_handle_pwr_constr(struct ieee80211_link_data *link,
2108 struct ieee80211_channel *channel,
2109 struct ieee80211_mgmt *mgmt,
2110 const u8 *country_ie, u8 country_ie_len,
2111 const u8 *pwr_constr_ie,
2112 const u8 *cisco_dtpc_ie)
2114 struct ieee80211_sub_if_data *sdata = link->sdata;
2115 bool has_80211h_pwr = false, has_cisco_pwr = false;
2116 int chan_pwr = 0, pwr_reduction_80211h = 0;
2117 int pwr_level_cisco, pwr_level_80211h;
2119 __le16 capab = mgmt->u.probe_resp.capab_info;
2121 if (ieee80211_is_s1g_beacon(mgmt->frame_control))
2122 return 0; /* TODO */
2125 (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
2126 capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
2127 has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
2128 sdata, channel, country_ie, country_ie_len,
2129 pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
2131 max_t(int, 0, chan_pwr - pwr_reduction_80211h);
2134 if (cisco_dtpc_ie) {
2135 ieee80211_find_cisco_dtpc(
2136 sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
2137 has_cisco_pwr = true;
2140 if (!has_80211h_pwr && !has_cisco_pwr)
2143 /* If we have both 802.11h and Cisco DTPC, apply both limits
2144 * by picking the smallest of the two power levels advertised.
2146 if (has_80211h_pwr &&
2147 (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
2148 new_ap_level = pwr_level_80211h;
2150 if (link->ap_power_level == new_ap_level)
2154 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
2155 pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
2157 } else { /* has_cisco_pwr is always true here. */
2158 new_ap_level = pwr_level_cisco;
2160 if (link->ap_power_level == new_ap_level)
2164 "Limiting TX power to %d dBm as advertised by %pM\n",
2165 pwr_level_cisco, link->u.mgd.bssid);
2168 link->ap_power_level = new_ap_level;
2169 if (__ieee80211_recalc_txpower(sdata))
2170 return BSS_CHANGED_TXPOWER;
2175 static void ieee80211_enable_ps(struct ieee80211_local *local,
2176 struct ieee80211_sub_if_data *sdata)
2178 struct ieee80211_conf *conf = &local->hw.conf;
2181 * If we are scanning right now then the parameters will
2182 * take effect when scan finishes.
2184 if (local->scanning)
2187 if (conf->dynamic_ps_timeout > 0 &&
2188 !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
2189 mod_timer(&local->dynamic_ps_timer, jiffies +
2190 msecs_to_jiffies(conf->dynamic_ps_timeout));
2192 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
2193 ieee80211_send_nullfunc(local, sdata, true);
2195 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
2196 ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
2199 conf->flags |= IEEE80211_CONF_PS;
2200 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2204 static void ieee80211_change_ps(struct ieee80211_local *local)
2206 struct ieee80211_conf *conf = &local->hw.conf;
2208 if (local->ps_sdata) {
2209 ieee80211_enable_ps(local, local->ps_sdata);
2210 } else if (conf->flags & IEEE80211_CONF_PS) {
2211 conf->flags &= ~IEEE80211_CONF_PS;
2212 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2213 del_timer_sync(&local->dynamic_ps_timer);
2214 cancel_work_sync(&local->dynamic_ps_enable_work);
2218 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
2220 struct ieee80211_local *local = sdata->local;
2221 struct ieee80211_if_managed *mgd = &sdata->u.mgd;
2222 struct sta_info *sta = NULL;
2223 bool authorized = false;
2225 if (!mgd->powersave)
2231 if (!mgd->associated)
2234 if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
2237 if (!(local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_MLO) &&
2238 !sdata->deflink.u.mgd.have_beacon)
2242 sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr);
2244 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
2250 /* need to hold RTNL or interface lock */
2251 void ieee80211_recalc_ps(struct ieee80211_local *local)
2253 struct ieee80211_sub_if_data *sdata, *found = NULL;
2257 if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS) ||
2258 ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
2259 local->ps_sdata = NULL;
2263 list_for_each_entry(sdata, &local->interfaces, list) {
2264 if (!ieee80211_sdata_running(sdata))
2266 if (sdata->vif.type == NL80211_IFTYPE_AP) {
2267 /* If an AP vif is found, then disable PS
2268 * by setting the count to zero thereby setting
2274 if (sdata->vif.type != NL80211_IFTYPE_STATION)
2280 if (count == 1 && ieee80211_powersave_allowed(found)) {
2281 u8 dtimper = found->deflink.u.mgd.dtim_period;
2283 timeout = local->dynamic_ps_forced_timeout;
2286 local->hw.conf.dynamic_ps_timeout = timeout;
2288 /* If the TIM IE is invalid, pretend the value is 1 */
2292 local->hw.conf.ps_dtim_period = dtimper;
2293 local->ps_sdata = found;
2295 local->ps_sdata = NULL;
2298 ieee80211_change_ps(local);
2301 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
2303 bool ps_allowed = ieee80211_powersave_allowed(sdata);
2305 if (sdata->vif.cfg.ps != ps_allowed) {
2306 sdata->vif.cfg.ps = ps_allowed;
2307 ieee80211_vif_cfg_change_notify(sdata, BSS_CHANGED_PS);
2311 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
2313 struct ieee80211_local *local =
2314 container_of(work, struct ieee80211_local,
2315 dynamic_ps_disable_work);
2317 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
2318 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
2319 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2322 ieee80211_wake_queues_by_reason(&local->hw,
2323 IEEE80211_MAX_QUEUE_MAP,
2324 IEEE80211_QUEUE_STOP_REASON_PS,
2328 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
2330 struct ieee80211_local *local =
2331 container_of(work, struct ieee80211_local,
2332 dynamic_ps_enable_work);
2333 struct ieee80211_sub_if_data *sdata = local->ps_sdata;
2334 struct ieee80211_if_managed *ifmgd;
2335 unsigned long flags;
2338 /* can only happen when PS was just disabled anyway */
2342 ifmgd = &sdata->u.mgd;
2344 if (local->hw.conf.flags & IEEE80211_CONF_PS)
2347 if (local->hw.conf.dynamic_ps_timeout > 0) {
2348 /* don't enter PS if TX frames are pending */
2349 if (drv_tx_frames_pending(local)) {
2350 mod_timer(&local->dynamic_ps_timer, jiffies +
2352 local->hw.conf.dynamic_ps_timeout));
2357 * transmission can be stopped by others which leads to
2358 * dynamic_ps_timer expiry. Postpone the ps timer if it
2359 * is not the actual idle state.
2361 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
2362 for (q = 0; q < local->hw.queues; q++) {
2363 if (local->queue_stop_reasons[q]) {
2364 spin_unlock_irqrestore(&local->queue_stop_reason_lock,
2366 mod_timer(&local->dynamic_ps_timer, jiffies +
2368 local->hw.conf.dynamic_ps_timeout));
2372 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
2375 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
2376 !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
2377 if (drv_tx_frames_pending(local)) {
2378 mod_timer(&local->dynamic_ps_timer, jiffies +
2380 local->hw.conf.dynamic_ps_timeout));
2382 ieee80211_send_nullfunc(local, sdata, true);
2383 /* Flush to get the tx status of nullfunc frame */
2384 ieee80211_flush_queues(local, sdata, false);
2388 if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
2389 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) ||
2390 (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
2391 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
2392 local->hw.conf.flags |= IEEE80211_CONF_PS;
2393 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2397 void ieee80211_dynamic_ps_timer(struct timer_list *t)
2399 struct ieee80211_local *local = from_timer(local, t, dynamic_ps_timer);
2401 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
2404 void ieee80211_dfs_cac_timer_work(struct work_struct *work)
2406 struct delayed_work *delayed_work = to_delayed_work(work);
2407 struct ieee80211_link_data *link =
2408 container_of(delayed_work, struct ieee80211_link_data,
2409 dfs_cac_timer_work);
2410 struct cfg80211_chan_def chandef = link->conf->chandef;
2411 struct ieee80211_sub_if_data *sdata = link->sdata;
2413 mutex_lock(&sdata->local->mtx);
2414 if (sdata->wdev.cac_started) {
2415 ieee80211_link_release_channel(link);
2416 cfg80211_cac_event(sdata->dev, &chandef,
2417 NL80211_RADAR_CAC_FINISHED,
2420 mutex_unlock(&sdata->local->mtx);
2424 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
2426 struct ieee80211_local *local = sdata->local;
2427 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2431 if (local->hw.queues < IEEE80211_NUM_ACS)
2434 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
2435 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
2437 unsigned long now = jiffies;
2439 if (tx_tspec->action == TX_TSPEC_ACTION_NONE &&
2440 tx_tspec->admitted_time &&
2441 time_after(now, tx_tspec->time_slice_start + HZ)) {
2442 tx_tspec->consumed_tx_time = 0;
2443 tx_tspec->time_slice_start = now;
2445 if (tx_tspec->downgraded)
2447 TX_TSPEC_ACTION_STOP_DOWNGRADE;
2450 switch (tx_tspec->action) {
2451 case TX_TSPEC_ACTION_STOP_DOWNGRADE:
2452 /* take the original parameters */
2453 if (drv_conf_tx(local, &sdata->deflink, ac,
2454 &sdata->deflink.tx_conf[ac]))
2455 link_err(&sdata->deflink,
2456 "failed to set TX queue parameters for queue %d\n",
2458 tx_tspec->action = TX_TSPEC_ACTION_NONE;
2459 tx_tspec->downgraded = false;
2462 case TX_TSPEC_ACTION_DOWNGRADE:
2463 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
2464 tx_tspec->action = TX_TSPEC_ACTION_NONE;
2468 /* downgrade next lower non-ACM AC */
2469 for (non_acm_ac = ac + 1;
2470 non_acm_ac < IEEE80211_NUM_ACS;
2472 if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac)))
2474 /* Usually the loop will result in using BK even if it
2475 * requires admission control, but such a configuration
2476 * makes no sense and we have to transmit somehow - the
2477 * AC selection does the same thing.
2478 * If we started out trying to downgrade from BK, then
2479 * the extra condition here might be needed.
2481 if (non_acm_ac >= IEEE80211_NUM_ACS)
2482 non_acm_ac = IEEE80211_AC_BK;
2483 if (drv_conf_tx(local, &sdata->deflink, ac,
2484 &sdata->deflink.tx_conf[non_acm_ac]))
2485 link_err(&sdata->deflink,
2486 "failed to set TX queue parameters for queue %d\n",
2488 tx_tspec->action = TX_TSPEC_ACTION_NONE;
2490 schedule_delayed_work(&ifmgd->tx_tspec_wk,
2491 tx_tspec->time_slice_start + HZ - now + 1);
2493 case TX_TSPEC_ACTION_NONE:
2502 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
2504 if (__ieee80211_sta_handle_tspec_ac_params(sdata))
2505 ieee80211_link_info_change_notify(sdata, &sdata->deflink,
2509 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work)
2511 struct ieee80211_sub_if_data *sdata;
2513 sdata = container_of(work, struct ieee80211_sub_if_data,
2514 u.mgd.tx_tspec_wk.work);
2515 ieee80211_sta_handle_tspec_ac_params(sdata);
2518 void ieee80211_mgd_set_link_qos_params(struct ieee80211_link_data *link)
2520 struct ieee80211_sub_if_data *sdata = link->sdata;
2521 struct ieee80211_local *local = sdata->local;
2522 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2523 struct ieee80211_tx_queue_params *params = link->tx_conf;
2526 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
2528 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
2530 params[ac].aifs, params[ac].cw_min, params[ac].cw_max,
2531 params[ac].txop, params[ac].uapsd,
2532 ifmgd->tx_tspec[ac].downgraded);
2533 if (!ifmgd->tx_tspec[ac].downgraded &&
2534 drv_conf_tx(local, link, ac, ¶ms[ac]))
2536 "failed to set TX queue parameters for AC %d\n",
2543 ieee80211_sta_wmm_params(struct ieee80211_local *local,
2544 struct ieee80211_link_data *link,
2545 const u8 *wmm_param, size_t wmm_param_len,
2546 const struct ieee80211_mu_edca_param_set *mu_edca)
2548 struct ieee80211_sub_if_data *sdata = link->sdata;
2549 struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS];
2550 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2552 int count, mu_edca_count, ac;
2554 u8 uapsd_queues = 0;
2556 if (!local->ops->conf_tx)
2559 if (local->hw.queues < IEEE80211_NUM_ACS)
2565 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
2568 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
2569 uapsd_queues = ifmgd->uapsd_queues;
2571 count = wmm_param[6] & 0x0f;
2572 /* -1 is the initial value of ifmgd->mu_edca_last_param_set.
2573 * if mu_edca was preset before and now it disappeared tell
2574 * the driver about it.
2576 mu_edca_count = mu_edca ? mu_edca->mu_qos_info & 0x0f : -1;
2577 if (count == link->u.mgd.wmm_last_param_set &&
2578 mu_edca_count == link->u.mgd.mu_edca_last_param_set)
2580 link->u.mgd.wmm_last_param_set = count;
2581 link->u.mgd.mu_edca_last_param_set = mu_edca_count;
2583 pos = wmm_param + 8;
2584 left = wmm_param_len - 8;
2586 memset(¶ms, 0, sizeof(params));
2589 for (; left >= 4; left -= 4, pos += 4) {
2590 int aci = (pos[0] >> 5) & 0x03;
2591 int acm = (pos[0] >> 4) & 0x01;
2596 ac = IEEE80211_AC_BK;
2598 sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
2599 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
2601 params[ac].mu_edca = !!mu_edca;
2603 params[ac].mu_edca_param_rec = mu_edca->ac_bk;
2606 ac = IEEE80211_AC_VI;
2608 sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
2609 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
2611 params[ac].mu_edca = !!mu_edca;
2613 params[ac].mu_edca_param_rec = mu_edca->ac_vi;
2616 ac = IEEE80211_AC_VO;
2618 sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
2619 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
2621 params[ac].mu_edca = !!mu_edca;
2623 params[ac].mu_edca_param_rec = mu_edca->ac_vo;
2627 ac = IEEE80211_AC_BE;
2629 sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
2630 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
2632 params[ac].mu_edca = !!mu_edca;
2634 params[ac].mu_edca_param_rec = mu_edca->ac_be;
2638 params[ac].aifs = pos[0] & 0x0f;
2640 if (params[ac].aifs < 2) {
2642 "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n",
2643 params[ac].aifs, aci);
2644 params[ac].aifs = 2;
2646 params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
2647 params[ac].cw_min = ecw2cw(pos[1] & 0x0f);
2648 params[ac].txop = get_unaligned_le16(pos + 2);
2649 params[ac].acm = acm;
2650 params[ac].uapsd = uapsd;
2652 if (params[ac].cw_min == 0 ||
2653 params[ac].cw_min > params[ac].cw_max) {
2655 "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n",
2656 params[ac].cw_min, params[ac].cw_max, aci);
2659 ieee80211_regulatory_limit_wmm_params(sdata, ¶ms[ac], ac);
2662 /* WMM specification requires all 4 ACIs. */
2663 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
2664 if (params[ac].cw_min == 0) {
2666 "AP has invalid WMM params (missing AC %d), using defaults\n",
2672 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
2673 link->tx_conf[ac] = params[ac];
2675 ieee80211_mgd_set_link_qos_params(link);
2677 /* enable WMM or activate new settings */
2678 link->conf->qos = true;
2682 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
2684 lockdep_assert_held(&sdata->local->mtx);
2686 sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
2687 ieee80211_run_deferred_scan(sdata->local);
2690 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
2692 mutex_lock(&sdata->local->mtx);
2693 __ieee80211_stop_poll(sdata);
2694 mutex_unlock(&sdata->local->mtx);
2697 static u64 ieee80211_handle_bss_capability(struct ieee80211_link_data *link,
2698 u16 capab, bool erp_valid, u8 erp)
2700 struct ieee80211_bss_conf *bss_conf = link->conf;
2701 struct ieee80211_supported_band *sband;
2703 bool use_protection;
2704 bool use_short_preamble;
2705 bool use_short_slot;
2707 sband = ieee80211_get_link_sband(link);
2712 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
2713 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
2715 use_protection = false;
2716 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
2719 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
2720 if (sband->band == NL80211_BAND_5GHZ ||
2721 sband->band == NL80211_BAND_6GHZ)
2722 use_short_slot = true;
2724 if (use_protection != bss_conf->use_cts_prot) {
2725 bss_conf->use_cts_prot = use_protection;
2726 changed |= BSS_CHANGED_ERP_CTS_PROT;
2729 if (use_short_preamble != bss_conf->use_short_preamble) {
2730 bss_conf->use_short_preamble = use_short_preamble;
2731 changed |= BSS_CHANGED_ERP_PREAMBLE;
2734 if (use_short_slot != bss_conf->use_short_slot) {
2735 bss_conf->use_short_slot = use_short_slot;
2736 changed |= BSS_CHANGED_ERP_SLOT;
2742 static u64 ieee80211_link_set_associated(struct ieee80211_link_data *link,
2743 struct cfg80211_bss *cbss)
2745 struct ieee80211_sub_if_data *sdata = link->sdata;
2746 struct ieee80211_bss_conf *bss_conf = link->conf;
2747 struct ieee80211_bss *bss = (void *)cbss->priv;
2748 u64 changed = BSS_CHANGED_QOS;
2750 /* not really used in MLO */
2751 sdata->u.mgd.beacon_timeout =
2752 usecs_to_jiffies(ieee80211_tu_to_usec(beacon_loss_count *
2753 bss_conf->beacon_int));
2755 changed |= ieee80211_handle_bss_capability(link,
2756 bss_conf->assoc_capability,
2760 ieee80211_check_rate_mask(link);
2762 link->u.mgd.bss = cbss;
2763 memcpy(link->u.mgd.bssid, cbss->bssid, ETH_ALEN);
2765 if (sdata->vif.p2p ||
2766 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
2767 const struct cfg80211_bss_ies *ies;
2770 ies = rcu_dereference(cbss->ies);
2774 ret = cfg80211_get_p2p_attr(
2775 ies->data, ies->len,
2776 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
2777 (u8 *) &bss_conf->p2p_noa_attr,
2778 sizeof(bss_conf->p2p_noa_attr));
2780 link->u.mgd.p2p_noa_index =
2781 bss_conf->p2p_noa_attr.index;
2782 changed |= BSS_CHANGED_P2P_PS;
2788 if (link->u.mgd.have_beacon) {
2789 bss_conf->beacon_rate = bss->beacon_rate;
2790 changed |= BSS_CHANGED_BEACON_INFO;
2792 bss_conf->beacon_rate = NULL;
2795 /* Tell the driver to monitor connection quality (if supported) */
2796 if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
2797 bss_conf->cqm_rssi_thold)
2798 changed |= BSS_CHANGED_CQM;
2803 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
2804 struct ieee80211_mgd_assoc_data *assoc_data,
2805 u64 changed[IEEE80211_MLD_MAX_NUM_LINKS])
2807 struct ieee80211_local *local = sdata->local;
2808 struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg;
2809 u64 vif_changed = BSS_CHANGED_ASSOC;
2810 unsigned int link_id;
2812 sdata->u.mgd.associated = true;
2814 for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
2815 struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
2816 struct ieee80211_link_data *link;
2819 assoc_data->link[link_id].status != WLAN_STATUS_SUCCESS)
2822 if (ieee80211_vif_is_mld(&sdata->vif) &&
2823 !(ieee80211_vif_usable_links(&sdata->vif) & BIT(link_id)))
2826 link = sdata_dereference(sdata->link[link_id], sdata);
2830 changed[link_id] |= ieee80211_link_set_associated(link, cbss);
2833 /* just to be sure */
2834 ieee80211_stop_poll(sdata);
2836 ieee80211_led_assoc(local, 1);
2840 /* Enable ARP filtering */
2841 if (vif_cfg->arp_addr_cnt)
2842 vif_changed |= BSS_CHANGED_ARP_FILTER;
2844 if (ieee80211_vif_is_mld(&sdata->vif)) {
2846 link_id < IEEE80211_MLD_MAX_NUM_LINKS;
2848 struct ieee80211_link_data *link;
2849 struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
2853 ieee80211_vif_usable_links(&sdata->vif)) ||
2854 assoc_data->link[link_id].status != WLAN_STATUS_SUCCESS)
2857 link = sdata_dereference(sdata->link[link_id], sdata);
2861 ieee80211_link_info_change_notify(sdata, link,
2864 ieee80211_recalc_smps(sdata, link);
2867 ieee80211_vif_cfg_change_notify(sdata, vif_changed);
2869 ieee80211_bss_info_change_notify(sdata,
2870 vif_changed | changed[0]);
2873 mutex_lock(&local->iflist_mtx);
2874 ieee80211_recalc_ps(local);
2875 mutex_unlock(&local->iflist_mtx);
2877 /* leave this here to not change ordering in non-MLO cases */
2878 if (!ieee80211_vif_is_mld(&sdata->vif))
2879 ieee80211_recalc_smps(sdata, &sdata->deflink);
2880 ieee80211_recalc_ps_vif(sdata);
2882 netif_carrier_on(sdata->dev);
2885 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
2886 u16 stype, u16 reason, bool tx,
2889 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2890 struct ieee80211_local *local = sdata->local;
2891 unsigned int link_id;
2893 struct ieee80211_prep_tx_info info = {
2897 sdata_assert_lock(sdata);
2899 if (WARN_ON_ONCE(tx && !frame_buf))
2902 if (WARN_ON(!ifmgd->associated))
2905 ieee80211_stop_poll(sdata);
2907 ifmgd->associated = false;
2909 /* other links will be destroyed */
2910 sdata->deflink.u.mgd.bss = NULL;
2912 netif_carrier_off(sdata->dev);
2915 * if we want to get out of ps before disassoc (why?) we have
2916 * to do it before sending disassoc, as otherwise the null-packet
2919 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
2920 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
2921 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2923 local->ps_sdata = NULL;
2925 /* disable per-vif ps */
2926 ieee80211_recalc_ps_vif(sdata);
2928 /* make sure ongoing transmission finishes */
2932 * drop any frame before deauth/disassoc, this can be data or
2933 * management frame. Since we are disconnecting, we should not
2934 * insist sending these frames which can take time and delay
2935 * the disconnection and possible the roaming.
2938 ieee80211_flush_queues(local, sdata, true);
2940 /* deauthenticate/disassociate now */
2941 if (tx || frame_buf) {
2943 * In multi channel scenarios guarantee that the virtual
2944 * interface is granted immediate airtime to transmit the
2945 * deauthentication frame by calling mgd_prepare_tx, if the
2946 * driver requested so.
2948 if (ieee80211_hw_check(&local->hw, DEAUTH_NEED_MGD_TX_PREP) &&
2949 !sdata->deflink.u.mgd.have_beacon) {
2950 drv_mgd_prepare_tx(sdata->local, sdata, &info);
2953 ieee80211_send_deauth_disassoc(sdata, sdata->vif.cfg.ap_addr,
2954 sdata->vif.cfg.ap_addr, stype,
2955 reason, tx, frame_buf);
2958 /* flush out frame - make sure the deauth was actually sent */
2960 ieee80211_flush_queues(local, sdata, false);
2962 drv_mgd_complete_tx(sdata->local, sdata, &info);
2964 /* clear AP addr only after building the needed mgmt frames */
2965 eth_zero_addr(sdata->deflink.u.mgd.bssid);
2966 eth_zero_addr(sdata->vif.cfg.ap_addr);
2968 sdata->vif.cfg.ssid_len = 0;
2970 /* remove AP and TDLS peers */
2971 sta_info_flush(sdata);
2973 /* finally reset all BSS / config parameters */
2974 if (!ieee80211_vif_is_mld(&sdata->vif))
2975 changed |= ieee80211_reset_erp_info(sdata);
2977 ieee80211_led_assoc(local, 0);
2978 changed |= BSS_CHANGED_ASSOC;
2979 sdata->vif.cfg.assoc = false;
2981 sdata->deflink.u.mgd.p2p_noa_index = -1;
2982 memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
2983 sizeof(sdata->vif.bss_conf.p2p_noa_attr));
2985 /* on the next assoc, re-program HT/VHT parameters */
2986 memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
2987 memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
2988 memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
2989 memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
2992 * reset MU-MIMO ownership and group data in default link,
2993 * if used, other links are destroyed
2995 memset(sdata->vif.bss_conf.mu_group.membership, 0,
2996 sizeof(sdata->vif.bss_conf.mu_group.membership));
2997 memset(sdata->vif.bss_conf.mu_group.position, 0,
2998 sizeof(sdata->vif.bss_conf.mu_group.position));
2999 if (!ieee80211_vif_is_mld(&sdata->vif))
3000 changed |= BSS_CHANGED_MU_GROUPS;
3001 sdata->vif.bss_conf.mu_mimo_owner = false;
3003 sdata->deflink.ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
3005 del_timer_sync(&local->dynamic_ps_timer);
3006 cancel_work_sync(&local->dynamic_ps_enable_work);
3008 /* Disable ARP filtering */
3009 if (sdata->vif.cfg.arp_addr_cnt)
3010 changed |= BSS_CHANGED_ARP_FILTER;
3012 sdata->vif.bss_conf.qos = false;
3013 if (!ieee80211_vif_is_mld(&sdata->vif)) {
3014 changed |= BSS_CHANGED_QOS;
3015 /* The BSSID (not really interesting) and HT changed */
3016 changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
3017 ieee80211_bss_info_change_notify(sdata, changed);
3019 ieee80211_vif_cfg_change_notify(sdata, changed);
3022 /* disassociated - set to defaults now */
3023 ieee80211_set_wmm_default(&sdata->deflink, false, false);
3025 del_timer_sync(&sdata->u.mgd.conn_mon_timer);
3026 del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
3027 del_timer_sync(&sdata->u.mgd.timer);
3029 sdata->vif.bss_conf.dtim_period = 0;
3030 sdata->vif.bss_conf.beacon_rate = NULL;
3032 sdata->deflink.u.mgd.have_beacon = false;
3033 sdata->deflink.u.mgd.tracking_signal_avg = false;
3034 sdata->deflink.u.mgd.disable_wmm_tracking = false;
3037 sdata->deflink.u.mgd.conn_flags = 0;
3038 mutex_lock(&local->mtx);
3040 for (link_id = 0; link_id < ARRAY_SIZE(sdata->link); link_id++) {
3041 struct ieee80211_link_data *link;
3043 link = sdata_dereference(sdata->link[link_id], sdata);
3046 ieee80211_link_release_channel(link);
3049 sdata->vif.bss_conf.csa_active = false;
3050 sdata->deflink.u.mgd.csa_waiting_bcn = false;
3051 sdata->deflink.u.mgd.csa_ignored_same_chan = false;
3052 if (sdata->deflink.csa_block_tx) {
3053 ieee80211_wake_vif_queues(local, sdata,
3054 IEEE80211_QUEUE_STOP_REASON_CSA);
3055 sdata->deflink.csa_block_tx = false;
3057 mutex_unlock(&local->mtx);
3059 /* existing TX TSPEC sessions no longer exist */
3060 memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec));
3061 cancel_delayed_work_sync(&ifmgd->tx_tspec_wk);
3063 sdata->vif.bss_conf.pwr_reduction = 0;
3064 sdata->vif.bss_conf.tx_pwr_env_num = 0;
3065 memset(sdata->vif.bss_conf.tx_pwr_env, 0,
3066 sizeof(sdata->vif.bss_conf.tx_pwr_env));
3068 ieee80211_vif_set_links(sdata, 0, 0);
3071 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
3073 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3074 struct ieee80211_local *local = sdata->local;
3076 mutex_lock(&local->mtx);
3077 if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
3080 __ieee80211_stop_poll(sdata);
3082 mutex_lock(&local->iflist_mtx);
3083 ieee80211_recalc_ps(local);
3084 mutex_unlock(&local->iflist_mtx);
3086 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
3090 * We've received a probe response, but are not sure whether
3091 * we have or will be receiving any beacons or data, so let's
3092 * schedule the timers again, just in case.
3094 ieee80211_sta_reset_beacon_monitor(sdata);
3096 mod_timer(&ifmgd->conn_mon_timer,
3097 round_jiffies_up(jiffies +
3098 IEEE80211_CONNECTION_IDLE_TIME));
3100 mutex_unlock(&local->mtx);
3103 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
3104 struct ieee80211_hdr *hdr,
3107 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3110 struct ieee80211_sta_tx_tspec *tx_tspec;
3111 unsigned long now = jiffies;
3113 if (!ieee80211_is_data_qos(hdr->frame_control))
3116 tid = ieee80211_get_tid(hdr);
3117 ac = ieee80211_ac_from_tid(tid);
3118 tx_tspec = &ifmgd->tx_tspec[ac];
3120 if (likely(!tx_tspec->admitted_time))
3123 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
3124 tx_tspec->consumed_tx_time = 0;
3125 tx_tspec->time_slice_start = now;
3127 if (tx_tspec->downgraded) {
3128 tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
3129 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
3133 if (tx_tspec->downgraded)
3136 tx_tspec->consumed_tx_time += tx_time;
3138 if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) {
3139 tx_tspec->downgraded = true;
3140 tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE;
3141 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
3145 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
3146 struct ieee80211_hdr *hdr, bool ack, u16 tx_time)
3148 ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time);
3150 if (!ieee80211_is_any_nullfunc(hdr->frame_control) ||
3151 !sdata->u.mgd.probe_send_count)
3155 sdata->u.mgd.probe_send_count = 0;
3157 sdata->u.mgd.nullfunc_failed = true;
3158 wiphy_work_queue(sdata->local->hw.wiphy, &sdata->work);
3161 static void ieee80211_mlme_send_probe_req(struct ieee80211_sub_if_data *sdata,
3162 const u8 *src, const u8 *dst,
3163 const u8 *ssid, size_t ssid_len,
3164 struct ieee80211_channel *channel)
3166 struct sk_buff *skb;
3168 skb = ieee80211_build_probe_req(sdata, src, dst, (u32)-1, channel,
3169 ssid, ssid_len, NULL, 0,
3170 IEEE80211_PROBE_FLAG_DIRECTED);
3172 ieee80211_tx_skb(sdata, skb);
3175 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
3177 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3178 u8 *dst = sdata->vif.cfg.ap_addr;
3179 u8 unicast_limit = max(1, max_probe_tries - 3);
3180 struct sta_info *sta;
3182 if (WARN_ON(ieee80211_vif_is_mld(&sdata->vif)))
3186 * Try sending broadcast probe requests for the last three
3187 * probe requests after the first ones failed since some
3188 * buggy APs only support broadcast probe requests.
3190 if (ifmgd->probe_send_count >= unicast_limit)
3194 * When the hardware reports an accurate Tx ACK status, it's
3195 * better to send a nullfunc frame instead of a probe request,
3196 * as it will kick us off the AP quickly if we aren't associated
3197 * anymore. The timeout will be reset if the frame is ACKed by
3200 ifmgd->probe_send_count++;
3203 mutex_lock(&sdata->local->sta_mtx);
3204 sta = sta_info_get(sdata, dst);
3206 ieee80211_check_fast_rx(sta);
3207 mutex_unlock(&sdata->local->sta_mtx);
3210 if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) {
3211 ifmgd->nullfunc_failed = false;
3212 ieee80211_send_nullfunc(sdata->local, sdata, false);
3214 ieee80211_mlme_send_probe_req(sdata, sdata->vif.addr, dst,
3215 sdata->vif.cfg.ssid,
3216 sdata->vif.cfg.ssid_len,
3217 sdata->deflink.u.mgd.bss->channel);
3220 ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
3221 run_again(sdata, ifmgd->probe_timeout);
3224 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
3227 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3228 bool already = false;
3230 if (WARN_ON_ONCE(ieee80211_vif_is_mld(&sdata->vif)))
3233 if (!ieee80211_sdata_running(sdata))
3238 if (!ifmgd->associated)
3241 mutex_lock(&sdata->local->mtx);
3243 if (sdata->local->tmp_channel || sdata->local->scanning) {
3244 mutex_unlock(&sdata->local->mtx);
3248 if (sdata->local->suspending) {
3249 /* reschedule after resume */
3250 mutex_unlock(&sdata->local->mtx);
3251 ieee80211_reset_ap_probe(sdata);
3256 mlme_dbg_ratelimited(sdata,
3257 "detected beacon loss from AP (missed %d beacons) - probing\n",
3260 ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL);
3264 * The driver/our work has already reported this event or the
3265 * connection monitoring has kicked in and we have already sent
3266 * a probe request. Or maybe the AP died and the driver keeps
3267 * reporting until we disassociate...
3269 * In either case we have to ignore the current call to this
3270 * function (except for setting the correct probe reason bit)
3271 * because otherwise we would reset the timer every time and
3272 * never check whether we received a probe response!
3274 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
3277 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
3279 mutex_unlock(&sdata->local->mtx);
3284 mutex_lock(&sdata->local->iflist_mtx);
3285 ieee80211_recalc_ps(sdata->local);
3286 mutex_unlock(&sdata->local->iflist_mtx);
3288 ifmgd->probe_send_count = 0;
3289 ieee80211_mgd_probe_ap_send(sdata);
3291 sdata_unlock(sdata);
3294 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
3295 struct ieee80211_vif *vif)
3297 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
3298 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3299 struct cfg80211_bss *cbss;
3300 struct sk_buff *skb;
3301 const struct element *ssid;
3304 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION ||
3305 ieee80211_vif_is_mld(&sdata->vif)))
3308 sdata_assert_lock(sdata);
3310 if (ifmgd->associated)
3311 cbss = sdata->deflink.u.mgd.bss;
3312 else if (ifmgd->auth_data)
3313 cbss = ifmgd->auth_data->bss;
3314 else if (ifmgd->assoc_data && ifmgd->assoc_data->link[0].bss)
3315 cbss = ifmgd->assoc_data->link[0].bss;
3320 ssid = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID);
3321 if (WARN_ONCE(!ssid || ssid->datalen > IEEE80211_MAX_SSID_LEN,
3322 "invalid SSID element (len=%d)",
3323 ssid ? ssid->datalen : -1))
3326 ssid_len = ssid->datalen;
3328 skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid,
3329 (u32) -1, cbss->channel,
3330 ssid->data, ssid_len,
3331 NULL, 0, IEEE80211_PROBE_FLAG_DIRECTED);
3336 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
3338 static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
3339 const u8 *buf, size_t len, bool tx,
3340 u16 reason, bool reconnect)
3342 struct ieee80211_event event = {
3344 .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT,
3345 .u.mlme.reason = reason,
3349 cfg80211_tx_mlme_mgmt(sdata->dev, buf, len, reconnect);
3351 cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
3353 drv_event_callback(sdata->local, sdata, &event);
3356 static void ___ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
3358 struct ieee80211_local *local = sdata->local;
3359 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3360 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
3363 if (!ifmgd->associated)
3366 /* in MLO assume we have a link where we can TX the frame */
3367 tx = ieee80211_vif_is_mld(&sdata->vif) ||
3368 !sdata->deflink.csa_block_tx;
3370 if (!ifmgd->driver_disconnect) {
3371 unsigned int link_id;
3374 * AP is probably out of range (or not reachable for another
3375 * reason) so remove the bss structs for that AP. In the case
3376 * of multi-link, it's not clear that all of them really are
3377 * out of range, but if they weren't the driver likely would
3378 * have switched to just have a single link active?
3381 link_id < ARRAY_SIZE(sdata->link);
3383 struct ieee80211_link_data *link;
3385 link = sdata_dereference(sdata->link[link_id], sdata);
3388 cfg80211_unlink_bss(local->hw.wiphy, link->u.mgd.bss);
3389 link->u.mgd.bss = NULL;
3393 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
3394 ifmgd->driver_disconnect ?
3395 WLAN_REASON_DEAUTH_LEAVING :
3396 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
3398 mutex_lock(&local->mtx);
3399 /* the other links will be destroyed */
3400 sdata->vif.bss_conf.csa_active = false;
3401 sdata->deflink.u.mgd.csa_waiting_bcn = false;
3402 if (sdata->deflink.csa_block_tx) {
3403 ieee80211_wake_vif_queues(local, sdata,
3404 IEEE80211_QUEUE_STOP_REASON_CSA);
3405 sdata->deflink.csa_block_tx = false;
3407 mutex_unlock(&local->mtx);
3409 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx,
3410 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
3412 ifmgd->reconnect = false;
3415 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
3418 ___ieee80211_disconnect(sdata);
3419 sdata_unlock(sdata);
3422 static void ieee80211_beacon_connection_loss_work(struct wiphy *wiphy,
3423 struct wiphy_work *work)
3425 struct ieee80211_sub_if_data *sdata =
3426 container_of(work, struct ieee80211_sub_if_data,
3427 u.mgd.beacon_connection_loss_work);
3428 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3430 if (ifmgd->connection_loss) {
3431 sdata_info(sdata, "Connection to AP %pM lost\n",
3432 sdata->vif.cfg.ap_addr);
3433 __ieee80211_disconnect(sdata);
3434 ifmgd->connection_loss = false;
3435 } else if (ifmgd->driver_disconnect) {
3437 "Driver requested disconnection from AP %pM\n",
3438 sdata->vif.cfg.ap_addr);
3439 __ieee80211_disconnect(sdata);
3440 ifmgd->driver_disconnect = false;
3442 if (ifmgd->associated)
3443 sdata->deflink.u.mgd.beacon_loss_count++;
3444 ieee80211_mgd_probe_ap(sdata, true);
3448 static void ieee80211_csa_connection_drop_work(struct wiphy *wiphy,
3449 struct wiphy_work *work)
3451 struct ieee80211_sub_if_data *sdata =
3452 container_of(work, struct ieee80211_sub_if_data,
3453 u.mgd.csa_connection_drop_work);
3455 __ieee80211_disconnect(sdata);
3458 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
3460 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
3461 struct ieee80211_hw *hw = &sdata->local->hw;
3463 trace_api_beacon_loss(sdata);
3465 sdata->u.mgd.connection_loss = false;
3466 wiphy_work_queue(hw->wiphy, &sdata->u.mgd.beacon_connection_loss_work);
3468 EXPORT_SYMBOL(ieee80211_beacon_loss);
3470 void ieee80211_connection_loss(struct ieee80211_vif *vif)
3472 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
3473 struct ieee80211_hw *hw = &sdata->local->hw;
3475 trace_api_connection_loss(sdata);
3477 sdata->u.mgd.connection_loss = true;
3478 wiphy_work_queue(hw->wiphy, &sdata->u.mgd.beacon_connection_loss_work);
3480 EXPORT_SYMBOL(ieee80211_connection_loss);
3482 void ieee80211_disconnect(struct ieee80211_vif *vif, bool reconnect)
3484 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
3485 struct ieee80211_hw *hw = &sdata->local->hw;
3487 trace_api_disconnect(sdata, reconnect);
3489 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
3492 sdata->u.mgd.driver_disconnect = true;
3493 sdata->u.mgd.reconnect = reconnect;
3494 wiphy_work_queue(hw->wiphy, &sdata->u.mgd.beacon_connection_loss_work);
3496 EXPORT_SYMBOL(ieee80211_disconnect);
3498 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
3501 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
3503 sdata_assert_lock(sdata);
3507 * we are not authenticated yet, the only timer that could be
3508 * running is the timeout for the authentication response which
3509 * which is not relevant anymore.
3511 del_timer_sync(&sdata->u.mgd.timer);
3512 sta_info_destroy_addr(sdata, auth_data->ap_addr);
3514 /* other links are destroyed */
3515 sdata->deflink.u.mgd.conn_flags = 0;
3516 eth_zero_addr(sdata->deflink.u.mgd.bssid);
3517 ieee80211_link_info_change_notify(sdata, &sdata->deflink,
3519 sdata->u.mgd.flags = 0;
3521 mutex_lock(&sdata->local->mtx);
3522 ieee80211_link_release_channel(&sdata->deflink);
3523 ieee80211_vif_set_links(sdata, 0, 0);
3524 mutex_unlock(&sdata->local->mtx);
3527 cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
3529 sdata->u.mgd.auth_data = NULL;
3539 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
3540 enum assoc_status status)
3542 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
3544 sdata_assert_lock(sdata);
3546 if (status != ASSOC_SUCCESS) {
3548 * we are not associated yet, the only timer that could be
3549 * running is the timeout for the association response which
3550 * which is not relevant anymore.
3552 del_timer_sync(&sdata->u.mgd.timer);
3553 sta_info_destroy_addr(sdata, assoc_data->ap_addr);
3555 sdata->deflink.u.mgd.conn_flags = 0;
3556 eth_zero_addr(sdata->deflink.u.mgd.bssid);
3557 ieee80211_link_info_change_notify(sdata, &sdata->deflink,
3559 sdata->u.mgd.flags = 0;
3560 sdata->vif.bss_conf.mu_mimo_owner = false;
3562 if (status != ASSOC_REJECTED) {
3563 struct cfg80211_assoc_failure data = {
3564 .timeout = status == ASSOC_TIMEOUT,
3568 BUILD_BUG_ON(ARRAY_SIZE(data.bss) !=
3569 ARRAY_SIZE(assoc_data->link));
3571 for (i = 0; i < ARRAY_SIZE(data.bss); i++)
3572 data.bss[i] = assoc_data->link[i].bss;
3574 if (ieee80211_vif_is_mld(&sdata->vif))
3575 data.ap_mld_addr = assoc_data->ap_addr;
3577 cfg80211_assoc_failure(sdata->dev, &data);
3580 mutex_lock(&sdata->local->mtx);
3581 ieee80211_link_release_channel(&sdata->deflink);
3582 ieee80211_vif_set_links(sdata, 0, 0);
3583 mutex_unlock(&sdata->local->mtx);
3587 sdata->u.mgd.assoc_data = NULL;
3590 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
3591 struct ieee80211_mgmt *mgmt, size_t len)
3593 struct ieee80211_local *local = sdata->local;
3594 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
3595 const struct element *challenge;
3598 struct ieee80211_prep_tx_info info = {
3599 .subtype = IEEE80211_STYPE_AUTH,
3602 pos = mgmt->u.auth.variable;
3603 challenge = cfg80211_find_elem(WLAN_EID_CHALLENGE, pos,
3604 len - (pos - (u8 *)mgmt));
3607 auth_data->expected_transaction = 4;
3608 drv_mgd_prepare_tx(sdata->local, sdata, &info);
3609 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
3610 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
3611 IEEE80211_TX_INTFL_MLME_CONN_TX;
3612 ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
3614 challenge->datalen + sizeof(*challenge),
3615 auth_data->ap_addr, auth_data->ap_addr,
3616 auth_data->key, auth_data->key_len,
3617 auth_data->key_idx, tx_flags);
3620 static bool ieee80211_mark_sta_auth(struct ieee80211_sub_if_data *sdata)
3622 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3623 const u8 *ap_addr = ifmgd->auth_data->ap_addr;
3624 struct sta_info *sta;
3627 sdata_info(sdata, "authenticated\n");
3628 ifmgd->auth_data->done = true;
3629 ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
3630 ifmgd->auth_data->timeout_started = true;
3631 run_again(sdata, ifmgd->auth_data->timeout);
3633 /* move station state to auth */
3634 mutex_lock(&sdata->local->sta_mtx);
3635 sta = sta_info_get(sdata, ap_addr);
3637 WARN_ONCE(1, "%s: STA %pM not found", sdata->name, ap_addr);
3641 if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
3642 sdata_info(sdata, "failed moving %pM to auth\n", ap_addr);
3648 mutex_unlock(&sdata->local->sta_mtx);
3652 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
3653 struct ieee80211_mgmt *mgmt, size_t len)
3655 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3656 u16 auth_alg, auth_transaction, status_code;
3657 struct ieee80211_event event = {
3659 .u.mlme.data = AUTH_EVENT,
3661 struct ieee80211_prep_tx_info info = {
3662 .subtype = IEEE80211_STYPE_AUTH,
3665 sdata_assert_lock(sdata);
3670 if (!ifmgd->auth_data || ifmgd->auth_data->done)
3673 if (!ether_addr_equal(ifmgd->auth_data->ap_addr, mgmt->bssid))
3676 auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
3677 auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
3678 status_code = le16_to_cpu(mgmt->u.auth.status_code);
3680 if (auth_alg != ifmgd->auth_data->algorithm ||
3681 (auth_alg != WLAN_AUTH_SAE &&
3682 auth_transaction != ifmgd->auth_data->expected_transaction) ||
3683 (auth_alg == WLAN_AUTH_SAE &&
3684 (auth_transaction < ifmgd->auth_data->expected_transaction ||
3685 auth_transaction > 2))) {
3686 sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
3687 mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
3689 ifmgd->auth_data->expected_transaction);
3693 if (status_code != WLAN_STATUS_SUCCESS) {
3694 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
3696 if (auth_alg == WLAN_AUTH_SAE &&
3697 (status_code == WLAN_STATUS_ANTI_CLOG_REQUIRED ||
3698 (auth_transaction == 1 &&
3699 (status_code == WLAN_STATUS_SAE_HASH_TO_ELEMENT ||
3700 status_code == WLAN_STATUS_SAE_PK)))) {
3701 /* waiting for userspace now */
3702 ifmgd->auth_data->waiting = true;
3703 ifmgd->auth_data->timeout =
3704 jiffies + IEEE80211_AUTH_WAIT_SAE_RETRY;
3705 ifmgd->auth_data->timeout_started = true;
3706 run_again(sdata, ifmgd->auth_data->timeout);
3710 sdata_info(sdata, "%pM denied authentication (status %d)\n",
3711 mgmt->sa, status_code);
3712 ieee80211_destroy_auth_data(sdata, false);
3713 event.u.mlme.status = MLME_DENIED;
3714 event.u.mlme.reason = status_code;
3715 drv_event_callback(sdata->local, sdata, &event);
3719 switch (ifmgd->auth_data->algorithm) {
3720 case WLAN_AUTH_OPEN:
3721 case WLAN_AUTH_LEAP:
3724 case WLAN_AUTH_FILS_SK:
3725 case WLAN_AUTH_FILS_SK_PFS:
3726 case WLAN_AUTH_FILS_PK:
3728 case WLAN_AUTH_SHARED_KEY:
3729 if (ifmgd->auth_data->expected_transaction != 4) {
3730 ieee80211_auth_challenge(sdata, mgmt, len);
3731 /* need another frame */
3736 WARN_ONCE(1, "invalid auth alg %d",
3737 ifmgd->auth_data->algorithm);
3741 event.u.mlme.status = MLME_SUCCESS;
3743 drv_event_callback(sdata->local, sdata, &event);
3744 if (ifmgd->auth_data->algorithm != WLAN_AUTH_SAE ||
3745 (auth_transaction == 2 &&
3746 ifmgd->auth_data->expected_transaction == 2)) {
3747 if (!ieee80211_mark_sta_auth(sdata))
3748 return; /* ignore frame -- wait for timeout */
3749 } else if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
3750 auth_transaction == 2) {
3751 sdata_info(sdata, "SAE peer confirmed\n");
3752 ifmgd->auth_data->peer_confirmed = true;
3755 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
3757 drv_mgd_complete_tx(sdata->local, sdata, &info);
3760 #define case_WLAN(type) \
3761 case WLAN_REASON_##type: return #type
3763 const char *ieee80211_get_reason_code_string(u16 reason_code)
3765 switch (reason_code) {
3766 case_WLAN(UNSPECIFIED);
3767 case_WLAN(PREV_AUTH_NOT_VALID);
3768 case_WLAN(DEAUTH_LEAVING);
3769 case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
3770 case_WLAN(DISASSOC_AP_BUSY);
3771 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
3772 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
3773 case_WLAN(DISASSOC_STA_HAS_LEFT);
3774 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
3775 case_WLAN(DISASSOC_BAD_POWER);
3776 case_WLAN(DISASSOC_BAD_SUPP_CHAN);
3777 case_WLAN(INVALID_IE);
3778 case_WLAN(MIC_FAILURE);
3779 case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
3780 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
3781 case_WLAN(IE_DIFFERENT);
3782 case_WLAN(INVALID_GROUP_CIPHER);
3783 case_WLAN(INVALID_PAIRWISE_CIPHER);
3784 case_WLAN(INVALID_AKMP);
3785 case_WLAN(UNSUPP_RSN_VERSION);
3786 case_WLAN(INVALID_RSN_IE_CAP);
3787 case_WLAN(IEEE8021X_FAILED);
3788 case_WLAN(CIPHER_SUITE_REJECTED);
3789 case_WLAN(DISASSOC_UNSPECIFIED_QOS);
3790 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
3791 case_WLAN(DISASSOC_LOW_ACK);
3792 case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
3793 case_WLAN(QSTA_LEAVE_QBSS);
3794 case_WLAN(QSTA_NOT_USE);
3795 case_WLAN(QSTA_REQUIRE_SETUP);
3796 case_WLAN(QSTA_TIMEOUT);
3797 case_WLAN(QSTA_CIPHER_NOT_SUPP);
3798 case_WLAN(MESH_PEER_CANCELED);
3799 case_WLAN(MESH_MAX_PEERS);
3800 case_WLAN(MESH_CONFIG);
3801 case_WLAN(MESH_CLOSE);
3802 case_WLAN(MESH_MAX_RETRIES);
3803 case_WLAN(MESH_CONFIRM_TIMEOUT);
3804 case_WLAN(MESH_INVALID_GTK);
3805 case_WLAN(MESH_INCONSISTENT_PARAM);
3806 case_WLAN(MESH_INVALID_SECURITY);
3807 case_WLAN(MESH_PATH_ERROR);
3808 case_WLAN(MESH_PATH_NOFORWARD);
3809 case_WLAN(MESH_PATH_DEST_UNREACHABLE);
3810 case_WLAN(MAC_EXISTS_IN_MBSS);
3811 case_WLAN(MESH_CHAN_REGULATORY);
3812 case_WLAN(MESH_CHAN);
3813 default: return "<unknown>";
3817 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
3818 struct ieee80211_mgmt *mgmt, size_t len)
3820 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3821 u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
3823 sdata_assert_lock(sdata);
3828 if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
3829 ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
3833 if (ifmgd->associated &&
3834 ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)) {
3835 sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
3836 sdata->vif.cfg.ap_addr, reason_code,
3837 ieee80211_get_reason_code_string(reason_code));
3839 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
3841 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
3842 reason_code, false);
3846 if (ifmgd->assoc_data &&
3847 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->ap_addr)) {
3849 "deauthenticated from %pM while associating (Reason: %u=%s)\n",
3850 ifmgd->assoc_data->ap_addr, reason_code,
3851 ieee80211_get_reason_code_string(reason_code));
3853 ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON);
3855 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
3861 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
3862 struct ieee80211_mgmt *mgmt, size_t len)
3864 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3867 sdata_assert_lock(sdata);
3872 if (!ifmgd->associated ||
3873 !ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr))
3876 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
3878 if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) {
3879 ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code);
3883 sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
3884 sdata->vif.cfg.ap_addr, reason_code,
3885 ieee80211_get_reason_code_string(reason_code));
3887 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
3889 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code,
3893 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
3894 u8 *supp_rates, unsigned int supp_rates_len,
3895 u32 *rates, u32 *basic_rates,
3896 bool *have_higher_than_11mbit,
3897 int *min_rate, int *min_rate_index,
3902 for (i = 0; i < supp_rates_len; i++) {
3903 int rate = supp_rates[i] & 0x7f;
3904 bool is_basic = !!(supp_rates[i] & 0x80);
3906 if ((rate * 5 * (1 << shift)) > 110)
3907 *have_higher_than_11mbit = true;
3910 * Skip HT, VHT, HE, EHT and SAE H2E only BSS membership
3911 * selectors since they're not rates.
3913 * Note: Even though the membership selector and the basic
3914 * rate flag share the same bit, they are not exactly
3917 if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) ||
3918 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY) ||
3919 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HE_PHY) ||
3920 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_EHT_PHY) ||
3921 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_SAE_H2E))
3924 for (j = 0; j < sband->n_bitrates; j++) {
3925 struct ieee80211_rate *br;
3928 br = &sband->bitrates[j];
3930 brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
3931 if (brate == rate) {
3934 *basic_rates |= BIT(j);
3935 if ((rate * 5) < *min_rate) {
3936 *min_rate = rate * 5;
3937 *min_rate_index = j;
3945 static bool ieee80211_twt_req_supported(struct ieee80211_sub_if_data *sdata,
3946 struct ieee80211_supported_band *sband,
3947 const struct link_sta_info *link_sta,
3948 const struct ieee802_11_elems *elems)
3950 const struct ieee80211_sta_he_cap *own_he_cap =
3951 ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif);
3953 if (elems->ext_capab_len < 10)
3956 if (!(elems->ext_capab[9] & WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT))
3959 return link_sta->pub->he_cap.he_cap_elem.mac_cap_info[0] &
3960 IEEE80211_HE_MAC_CAP0_TWT_RES &&
3962 (own_he_cap->he_cap_elem.mac_cap_info[0] &
3963 IEEE80211_HE_MAC_CAP0_TWT_REQ);
3966 static u64 ieee80211_recalc_twt_req(struct ieee80211_sub_if_data *sdata,
3967 struct ieee80211_supported_band *sband,
3968 struct ieee80211_link_data *link,
3969 struct link_sta_info *link_sta,
3970 struct ieee802_11_elems *elems)
3972 bool twt = ieee80211_twt_req_supported(sdata, sband, link_sta, elems);
3974 if (link->conf->twt_requester != twt) {
3975 link->conf->twt_requester = twt;
3976 return BSS_CHANGED_TWT;
3981 static bool ieee80211_twt_bcast_support(struct ieee80211_sub_if_data *sdata,
3982 struct ieee80211_bss_conf *bss_conf,
3983 struct ieee80211_supported_band *sband,
3984 struct link_sta_info *link_sta)
3986 const struct ieee80211_sta_he_cap *own_he_cap =
3987 ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif);
3989 return bss_conf->he_support &&
3990 (link_sta->pub->he_cap.he_cap_elem.mac_cap_info[2] &
3991 IEEE80211_HE_MAC_CAP2_BCAST_TWT) &&
3993 (own_he_cap->he_cap_elem.mac_cap_info[2] &
3994 IEEE80211_HE_MAC_CAP2_BCAST_TWT);
3997 static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link,
3998 struct link_sta_info *link_sta,
3999 struct cfg80211_bss *cbss,
4000 struct ieee80211_mgmt *mgmt,
4001 const u8 *elem_start,
4002 unsigned int elem_len,
4005 struct ieee80211_sub_if_data *sdata = link->sdata;
4006 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
4007 struct ieee80211_bss_conf *bss_conf = link->conf;
4008 struct ieee80211_local *local = sdata->local;
4009 unsigned int link_id = link->link_id;
4010 struct ieee80211_elems_parse_params parse_params = {
4011 .start = elem_start,
4013 .link_id = link_id == assoc_data->assoc_link_id ? -1 : link_id,
4016 bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
4017 bool is_s1g = cbss->channel->band == NL80211_BAND_S1GHZ;
4018 const struct cfg80211_bss_ies *bss_ies = NULL;
4019 struct ieee80211_supported_band *sband;
4020 struct ieee802_11_elems *elems;
4021 const __le16 prof_bss_param_ch_present =
4022 cpu_to_le16(IEEE80211_MLE_STA_CONTROL_BSS_PARAM_CHANGE_CNT_PRESENT);
4026 elems = ieee802_11_parse_elems_full(&parse_params);
4030 if (link_id == assoc_data->assoc_link_id) {
4031 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
4034 * we should not get to this flow unless the association was
4035 * successful, so set the status directly to success
4037 assoc_data->link[link_id].status = WLAN_STATUS_SUCCESS;
4038 if (elems->ml_basic) {
4039 if (!(elems->ml_basic->control &
4040 cpu_to_le16(IEEE80211_MLC_BASIC_PRES_BSS_PARAM_CH_CNT))) {
4044 link->u.mgd.bss_param_ch_cnt =
4045 ieee80211_mle_get_bss_param_ch_cnt(elems->ml_basic);
4047 } else if (!elems->prof ||
4048 !(elems->prof->control & prof_bss_param_ch_present)) {
4052 const u8 *ptr = elems->prof->variable +
4053 elems->prof->sta_info_len - 1;
4056 * During parsing, we validated that these fields exist,
4057 * otherwise elems->prof would have been set to NULL.
4059 capab_info = get_unaligned_le16(ptr);
4060 assoc_data->link[link_id].status = get_unaligned_le16(ptr + 2);
4061 link->u.mgd.bss_param_ch_cnt =
4062 ieee80211_mle_basic_sta_prof_bss_param_ch_cnt(elems->prof);
4064 if (assoc_data->link[link_id].status != WLAN_STATUS_SUCCESS) {
4065 link_info(link, "association response status code=%u\n",
4066 assoc_data->link[link_id].status);
4072 if (!is_s1g && !elems->supp_rates) {
4073 sdata_info(sdata, "no SuppRates element in AssocResp\n");
4078 link->u.mgd.tdls_chan_switch_prohibited =
4079 elems->ext_capab && elems->ext_capab_len >= 5 &&
4080 (elems->ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
4083 * Some APs are erroneously not including some information in their
4084 * (re)association response frames. Try to recover by using the data
4085 * from the beacon or probe response. This seems to afflict mobile
4086 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
4087 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
4090 ((assoc_data->wmm && !elems->wmm_param) ||
4091 (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT) &&
4092 (!elems->ht_cap_elem || !elems->ht_operation)) ||
4093 (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) &&
4094 (!elems->vht_cap_elem || !elems->vht_operation)))) {
4095 const struct cfg80211_bss_ies *ies;
4096 struct ieee802_11_elems *bss_elems;
4099 ies = rcu_dereference(cbss->ies);
4101 bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
4109 parse_params.start = bss_ies->data;
4110 parse_params.len = bss_ies->len;
4111 parse_params.bss = cbss;
4112 bss_elems = ieee802_11_parse_elems_full(&parse_params);
4118 if (assoc_data->wmm &&
4119 !elems->wmm_param && bss_elems->wmm_param) {
4120 elems->wmm_param = bss_elems->wmm_param;
4122 "AP bug: WMM param missing from AssocResp\n");
4126 * Also check if we requested HT/VHT, otherwise the AP doesn't
4127 * have to include the IEs in the (re)association response.
4129 if (!elems->ht_cap_elem && bss_elems->ht_cap_elem &&
4130 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)) {
4131 elems->ht_cap_elem = bss_elems->ht_cap_elem;
4133 "AP bug: HT capability missing from AssocResp\n");
4135 if (!elems->ht_operation && bss_elems->ht_operation &&
4136 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)) {
4137 elems->ht_operation = bss_elems->ht_operation;
4139 "AP bug: HT operation missing from AssocResp\n");
4141 if (!elems->vht_cap_elem && bss_elems->vht_cap_elem &&
4142 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) {
4143 elems->vht_cap_elem = bss_elems->vht_cap_elem;
4145 "AP bug: VHT capa missing from AssocResp\n");
4147 if (!elems->vht_operation && bss_elems->vht_operation &&
4148 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) {
4149 elems->vht_operation = bss_elems->vht_operation;
4151 "AP bug: VHT operation missing from AssocResp\n");
4158 * We previously checked these in the beacon/probe response, so
4159 * they should be present here. This is just a safety net.
4161 if (!is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT) &&
4162 (!elems->wmm_param || !elems->ht_cap_elem || !elems->ht_operation)) {
4164 "HT AP is missing WMM params or HT capability/operation\n");
4169 if (!is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) &&
4170 (!elems->vht_cap_elem || !elems->vht_operation)) {
4172 "VHT AP is missing VHT capability/operation\n");
4177 if (is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
4178 !elems->he_6ghz_capa) {
4180 "HE 6 GHz AP is missing HE 6 GHz band capability\n");
4185 if (WARN_ON(!link->conf->chandef.chan)) {
4189 sband = local->hw.wiphy->bands[link->conf->chandef.chan->band];
4191 if (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
4192 (!elems->he_cap || !elems->he_operation)) {
4194 "HE AP is missing HE capability/operation\n");
4199 /* Set up internal HT/VHT capabilities */
4200 if (elems->ht_cap_elem && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT))
4201 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
4205 if (elems->vht_cap_elem &&
4206 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) {
4207 const struct ieee80211_vht_cap *bss_vht_cap = NULL;
4208 const struct cfg80211_bss_ies *ies;
4211 * Cisco AP module 9115 with FW 17.3 has a bug and sends a
4212 * too large maximum MPDU length in the association response
4213 * (indicating 12k) that it cannot actually process ...
4217 ies = rcu_dereference(cbss->ies);
4219 const struct element *elem;
4221 elem = cfg80211_find_elem(WLAN_EID_VHT_CAPABILITY,
4222 ies->data, ies->len);
4223 if (elem && elem->datalen >= sizeof(*bss_vht_cap))
4224 bss_vht_cap = (const void *)elem->data;
4227 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
4228 elems->vht_cap_elem,
4229 bss_vht_cap, link_sta);
4233 if (elems->he_operation && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
4235 ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband,
4238 elems->he_6ghz_capa,
4241 bss_conf->he_support = link_sta->pub->he_cap.has_he;
4242 if (elems->rsnx && elems->rsnx_len &&
4243 (elems->rsnx[0] & WLAN_RSNX_CAPA_PROTECTED_TWT) &&
4244 wiphy_ext_feature_isset(local->hw.wiphy,
4245 NL80211_EXT_FEATURE_PROTECTED_TWT))
4246 bss_conf->twt_protected = true;
4248 bss_conf->twt_protected = false;
4250 *changed |= ieee80211_recalc_twt_req(sdata, sband, link,
4253 if (elems->eht_operation && elems->eht_cap &&
4254 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT)) {
4255 ieee80211_eht_cap_ie_to_sta_eht_cap(sdata, sband,
4262 bss_conf->eht_support = link_sta->pub->eht_cap.has_eht;
4263 *changed |= BSS_CHANGED_EHT_PUNCTURING;
4265 bss_conf->eht_support = false;
4268 bss_conf->he_support = false;
4269 bss_conf->twt_requester = false;
4270 bss_conf->twt_protected = false;
4271 bss_conf->eht_support = false;
4274 bss_conf->twt_broadcast =
4275 ieee80211_twt_bcast_support(sdata, bss_conf, sband, link_sta);
4277 if (bss_conf->he_support) {
4278 bss_conf->he_bss_color.color =
4279 le32_get_bits(elems->he_operation->he_oper_params,
4280 IEEE80211_HE_OPERATION_BSS_COLOR_MASK);
4281 bss_conf->he_bss_color.partial =
4282 le32_get_bits(elems->he_operation->he_oper_params,
4283 IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR);
4284 bss_conf->he_bss_color.enabled =
4285 !le32_get_bits(elems->he_operation->he_oper_params,
4286 IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED);
4288 if (bss_conf->he_bss_color.enabled)
4289 *changed |= BSS_CHANGED_HE_BSS_COLOR;
4291 bss_conf->htc_trig_based_pkt_ext =
4292 le32_get_bits(elems->he_operation->he_oper_params,
4293 IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK);
4294 bss_conf->frame_time_rts_th =
4295 le32_get_bits(elems->he_operation->he_oper_params,
4296 IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
4298 bss_conf->uora_exists = !!elems->uora_element;
4299 if (elems->uora_element)
4300 bss_conf->uora_ocw_range = elems->uora_element[0];
4302 ieee80211_he_op_ie_to_bss_conf(&sdata->vif, elems->he_operation);
4303 ieee80211_he_spr_ie_to_bss_conf(&sdata->vif, elems->he_spr);
4304 /* TODO: OPEN: what happens if BSS color disable is set? */
4307 if (cbss->transmitted_bss) {
4308 bss_conf->nontransmitted = true;
4309 ether_addr_copy(bss_conf->transmitter_bssid,
4310 cbss->transmitted_bss->bssid);
4311 bss_conf->bssid_indicator = cbss->max_bssid_indicator;
4312 bss_conf->bssid_index = cbss->bssid_index;
4316 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
4317 * in their association response, so ignore that data for our own
4318 * configuration. If it changed since the last beacon, we'll get the
4319 * next beacon and update then.
4323 * If an operating mode notification IE is present, override the
4324 * NSS calculation (that would be done in rate_control_rate_init())
4325 * and use the # of streams from that element.
4327 if (elems->opmode_notif &&
4328 !(*elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
4331 nss = *elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
4332 nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
4334 link_sta->pub->rx_nss = nss;
4338 * Always handle WMM once after association regardless
4339 * of the first value the AP uses. Setting -1 here has
4340 * that effect because the AP values is an unsigned
4343 link->u.mgd.wmm_last_param_set = -1;
4344 link->u.mgd.mu_edca_last_param_set = -1;
4346 if (link->u.mgd.disable_wmm_tracking) {
4347 ieee80211_set_wmm_default(link, false, false);
4348 } else if (!ieee80211_sta_wmm_params(local, link, elems->wmm_param,
4349 elems->wmm_param_len,
4350 elems->mu_edca_param_set)) {
4351 /* still enable QoS since we might have HT/VHT */
4352 ieee80211_set_wmm_default(link, false, true);
4353 /* disable WMM tracking in this case to disable
4354 * tracking WMM parameter changes in the beacon if
4355 * the parameters weren't actually valid. Doing so
4356 * avoids changing parameters very strangely when
4357 * the AP is going back and forth between valid and
4358 * invalid parameters.
4360 link->u.mgd.disable_wmm_tracking = true;
4363 if (elems->max_idle_period_ie) {
4364 bss_conf->max_idle_period =
4365 le16_to_cpu(elems->max_idle_period_ie->max_idle_period);
4366 bss_conf->protected_keep_alive =
4367 !!(elems->max_idle_period_ie->idle_options &
4368 WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE);
4369 *changed |= BSS_CHANGED_KEEP_ALIVE;
4371 bss_conf->max_idle_period = 0;
4372 bss_conf->protected_keep_alive = false;
4375 /* set assoc capability (AID was already set earlier),
4376 * ieee80211_set_associated() will tell the driver */
4377 bss_conf->assoc_capability = capab_info;
4386 static int ieee80211_mgd_setup_link_sta(struct ieee80211_link_data *link,
4387 struct sta_info *sta,
4388 struct link_sta_info *link_sta,
4389 struct cfg80211_bss *cbss)
4391 struct ieee80211_sub_if_data *sdata = link->sdata;
4392 struct ieee80211_local *local = sdata->local;
4393 struct ieee80211_bss *bss = (void *)cbss->priv;
4394 u32 rates = 0, basic_rates = 0;
4395 bool have_higher_than_11mbit = false;
4396 int min_rate = INT_MAX, min_rate_index = -1;
4397 /* this is clearly wrong for MLO but we'll just remove it later */
4398 int shift = ieee80211_vif_get_shift(&sdata->vif);
4399 struct ieee80211_supported_band *sband;
4401 memcpy(link_sta->addr, cbss->bssid, ETH_ALEN);
4402 memcpy(link_sta->pub->addr, cbss->bssid, ETH_ALEN);
4404 /* TODO: S1G Basic Rate Set is expressed elsewhere */
4405 if (cbss->channel->band == NL80211_BAND_S1GHZ) {
4406 ieee80211_s1g_sta_rate_init(sta);
4410 sband = local->hw.wiphy->bands[cbss->channel->band];
4412 ieee80211_get_rates(sband, bss->supp_rates, bss->supp_rates_len,
4413 &rates, &basic_rates, &have_higher_than_11mbit,
4414 &min_rate, &min_rate_index, shift);
4417 * This used to be a workaround for basic rates missing
4418 * in the association response frame. Now that we no
4419 * longer use the basic rates from there, it probably
4420 * doesn't happen any more, but keep the workaround so
4421 * in case some *other* APs are buggy in different ways
4422 * we can connect -- with a warning.
4423 * Allow this workaround only in case the AP provided at least
4426 if (min_rate_index < 0) {
4427 link_info(link, "No legacy rates in association response\n");
4429 } else if (!basic_rates) {
4430 link_info(link, "No basic rates, using min rate instead\n");
4431 basic_rates = BIT(min_rate_index);
4435 link_sta->pub->supp_rates[cbss->channel->band] = rates;
4437 link_info(link, "No rates found, keeping mandatory only\n");
4439 link->conf->basic_rates = basic_rates;
4441 /* cf. IEEE 802.11 9.2.12 */
4442 link->operating_11g_mode = sband->band == NL80211_BAND_2GHZ &&
4443 have_higher_than_11mbit;
4448 static u8 ieee80211_max_rx_chains(struct ieee80211_link_data *link,
4449 struct cfg80211_bss *cbss)
4451 struct ieee80211_he_mcs_nss_supp *he_mcs_nss_supp;
4452 const struct element *ht_cap_elem, *vht_cap_elem;
4453 const struct cfg80211_bss_ies *ies;
4454 const struct ieee80211_ht_cap *ht_cap;
4455 const struct ieee80211_vht_cap *vht_cap;
4456 const struct ieee80211_he_cap_elem *he_cap;
4457 const struct element *he_cap_elem;
4458 u16 mcs_80_map, mcs_160_map;
4459 int i, mcs_nss_size;
4463 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)
4466 ht_cap_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_CAPABILITY);
4467 if (ht_cap_elem && ht_cap_elem->datalen >= sizeof(*ht_cap)) {
4468 ht_cap = (void *)ht_cap_elem->data;
4469 chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
4471 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
4472 * "Tx Unequal Modulation Supported" fields.
4476 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)
4479 vht_cap_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY);
4480 if (vht_cap_elem && vht_cap_elem->datalen >= sizeof(*vht_cap)) {
4484 vht_cap = (void *)vht_cap_elem->data;
4485 tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
4486 for (nss = 8; nss > 0; nss--) {
4487 if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
4488 IEEE80211_VHT_MCS_NOT_SUPPORTED)
4491 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
4492 chains = max(chains, nss);
4495 if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE)
4498 ies = rcu_dereference(cbss->ies);
4499 he_cap_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_CAPABILITY,
4500 ies->data, ies->len);
4502 if (!he_cap_elem || he_cap_elem->datalen < sizeof(*he_cap))
4505 /* skip one byte ext_tag_id */
4506 he_cap = (void *)(he_cap_elem->data + 1);
4507 mcs_nss_size = ieee80211_he_mcs_nss_size(he_cap);
4510 if (he_cap_elem->datalen < 1 + mcs_nss_size + sizeof(*he_cap))
4513 /* mcs_nss is right after he_cap info */
4514 he_mcs_nss_supp = (void *)(he_cap + 1);
4516 mcs_80_map = le16_to_cpu(he_mcs_nss_supp->tx_mcs_80);
4518 for (i = 7; i >= 0; i--) {
4519 u8 mcs_80 = mcs_80_map >> (2 * i) & 3;
4521 if (mcs_80 != IEEE80211_VHT_MCS_NOT_SUPPORTED) {
4522 chains = max_t(u8, chains, i + 1);
4527 support_160 = he_cap->phy_cap_info[0] &
4528 IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
4533 mcs_160_map = le16_to_cpu(he_mcs_nss_supp->tx_mcs_160);
4534 for (i = 7; i >= 0; i--) {
4535 u8 mcs_160 = mcs_160_map >> (2 * i) & 3;
4537 if (mcs_160 != IEEE80211_VHT_MCS_NOT_SUPPORTED) {
4538 chains = max_t(u8, chains, i + 1);
4547 ieee80211_verify_peer_he_mcs_support(struct ieee80211_sub_if_data *sdata,
4548 const struct cfg80211_bss_ies *ies,
4549 const struct ieee80211_he_operation *he_op)
4551 const struct element *he_cap_elem;
4552 const struct ieee80211_he_cap_elem *he_cap;
4553 struct ieee80211_he_mcs_nss_supp *he_mcs_nss_supp;
4554 u16 mcs_80_map_tx, mcs_80_map_rx;
4559 he_cap_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_CAPABILITY,
4560 ies->data, ies->len);
4566 if (he_cap_elem->datalen < 1 + sizeof(*he_cap)) {
4568 "Invalid HE elem, Disable HE\n");
4572 /* skip one byte ext_tag_id */
4573 he_cap = (void *)(he_cap_elem->data + 1);
4574 mcs_nss_size = ieee80211_he_mcs_nss_size(he_cap);
4577 if (he_cap_elem->datalen < 1 + sizeof(*he_cap) + mcs_nss_size) {
4579 "Invalid HE elem with nss size, Disable HE\n");
4583 /* mcs_nss is right after he_cap info */
4584 he_mcs_nss_supp = (void *)(he_cap + 1);
4586 mcs_80_map_tx = le16_to_cpu(he_mcs_nss_supp->tx_mcs_80);
4587 mcs_80_map_rx = le16_to_cpu(he_mcs_nss_supp->rx_mcs_80);
4589 /* P802.11-REVme/D0.3
4590 * 27.1.1 Introduction to the HE PHY
4592 * An HE STA shall support the following features:
4594 * Single spatial stream HE-MCSs 0 to 7 (transmit and receive) in all
4595 * supported channel widths for HE SU PPDUs
4597 if ((mcs_80_map_tx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4598 (mcs_80_map_rx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED) {
4600 "Missing mandatory rates for 1 Nss, rx 0x%x, tx 0x%x, disable HE\n",
4601 mcs_80_map_tx, mcs_80_map_rx);
4608 ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set);
4611 * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all
4612 * zeroes, which is nonsense, and completely inconsistent with itself
4613 * (it doesn't have 8 streams). Accept the settings in this case anyway.
4615 if (!ap_min_req_set)
4618 /* make sure the AP is consistent with itself
4620 * P802.11-REVme/D0.3
4621 * 26.17.1 Basic HE BSS operation
4623 * A STA that is operating in an HE BSS shall be able to receive and
4624 * transmit at each of the <HE-MCS, NSS> tuple values indicated by the
4625 * Basic HE-MCS And NSS Set field of the HE Operation parameter of the
4626 * MLME-START.request primitive and shall be able to receive at each of
4627 * the <HE-MCS, NSS> tuple values indicated by the Supported HE-MCS and
4628 * NSS Set field in the HE Capabilities parameter of the MLMESTART.request
4631 for (nss = 8; nss > 0; nss--) {
4632 u8 ap_op_val = (ap_min_req_set >> (2 * (nss - 1))) & 3;
4636 if (ap_op_val == IEEE80211_HE_MCS_NOT_SUPPORTED)
4639 ap_rx_val = (mcs_80_map_rx >> (2 * (nss - 1))) & 3;
4640 ap_tx_val = (mcs_80_map_tx >> (2 * (nss - 1))) & 3;
4642 if (ap_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4643 ap_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4644 ap_rx_val < ap_op_val || ap_tx_val < ap_op_val) {
4646 "Invalid rates for %d Nss, rx %d, tx %d oper %d, disable HE\n",
4647 nss, ap_rx_val, ap_rx_val, ap_op_val);
4656 ieee80211_verify_sta_he_mcs_support(struct ieee80211_sub_if_data *sdata,
4657 struct ieee80211_supported_band *sband,
4658 const struct ieee80211_he_operation *he_op)
4660 const struct ieee80211_sta_he_cap *sta_he_cap =
4661 ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif);
4665 if (!sta_he_cap || !he_op)
4668 ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set);
4671 * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all
4672 * zeroes, which is nonsense, and completely inconsistent with itself
4673 * (it doesn't have 8 streams). Accept the settings in this case anyway.
4675 if (!ap_min_req_set)
4678 /* Need to go over for 80MHz, 160MHz and for 80+80 */
4679 for (i = 0; i < 3; i++) {
4680 const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp =
4681 &sta_he_cap->he_mcs_nss_supp;
4682 u16 sta_mcs_map_rx =
4683 le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]);
4684 u16 sta_mcs_map_tx =
4685 le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]);
4687 bool verified = true;
4690 * For each band there is a maximum of 8 spatial streams
4691 * possible. Each of the sta_mcs_map_* is a 16-bit struct built
4692 * of 2 bits per NSS (1-8), with the values defined in enum
4693 * ieee80211_he_mcs_support. Need to make sure STA TX and RX
4694 * capabilities aren't less than the AP's minimum requirements
4695 * for this HE BSS per SS.
4696 * It is enough to find one such band that meets the reqs.
4698 for (nss = 8; nss > 0; nss--) {
4699 u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3;
4700 u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3;
4701 u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3;
4703 if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED)
4707 * Make sure the HE AP doesn't require MCSs that aren't
4708 * supported by the client as required by spec
4710 * P802.11-REVme/D0.3
4711 * 26.17.1 Basic HE BSS operation
4713 * An HE STA shall not attempt to join * (MLME-JOIN.request primitive)
4714 * a BSS, unless it supports (i.e., is able to both transmit and
4715 * receive using) all of the <HE-MCS, NSS> tuples in the basic
4716 * HE-MCS and NSS set.
4718 if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4719 sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4720 (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) {
4730 /* If here, STA doesn't meet AP's HE min requirements */
4735 ieee80211_get_eht_cap_mcs_nss(const struct ieee80211_sta_he_cap *sta_he_cap,
4736 const struct ieee80211_sta_eht_cap *sta_eht_cap,
4737 unsigned int idx, int bw)
4739 u8 he_phy_cap0 = sta_he_cap->he_cap_elem.phy_cap_info[0];
4740 u8 eht_phy_cap0 = sta_eht_cap->eht_cap_elem.phy_cap_info[0];
4742 /* handle us being a 20 MHz-only EHT STA - with four values
4743 * for MCS 0-7, 8-9, 10-11, 12-13.
4745 if (!(he_phy_cap0 & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL))
4746 return sta_eht_cap->eht_mcs_nss_supp.only_20mhz.rx_tx_max_nss[idx];
4748 /* the others have MCS 0-9 together, rather than separately from 0-7 */
4754 return sta_eht_cap->eht_mcs_nss_supp.bw._80.rx_tx_max_nss[idx];
4757 (IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
4758 IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)))
4759 return 0xff; /* pass check */
4760 return sta_eht_cap->eht_mcs_nss_supp.bw._160.rx_tx_max_nss[idx];
4762 if (!(eht_phy_cap0 & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ))
4763 return 0xff; /* pass check */
4764 return sta_eht_cap->eht_mcs_nss_supp.bw._320.rx_tx_max_nss[idx];
4772 ieee80211_verify_sta_eht_mcs_support(struct ieee80211_sub_if_data *sdata,
4773 struct ieee80211_supported_band *sband,
4774 const struct ieee80211_eht_operation *eht_op)
4776 const struct ieee80211_sta_he_cap *sta_he_cap =
4777 ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif);
4778 const struct ieee80211_sta_eht_cap *sta_eht_cap =
4779 ieee80211_get_eht_iftype_cap_vif(sband, &sdata->vif);
4780 const struct ieee80211_eht_mcs_nss_supp_20mhz_only *req;
4783 if (!sta_he_cap || !sta_eht_cap || !eht_op)
4786 req = &eht_op->basic_mcs_nss;
4788 for (i = 0; i < ARRAY_SIZE(req->rx_tx_max_nss); i++) {
4789 u8 req_rx_nss, req_tx_nss;
4792 req_rx_nss = u8_get_bits(req->rx_tx_max_nss[i],
4793 IEEE80211_EHT_MCS_NSS_RX);
4794 req_tx_nss = u8_get_bits(req->rx_tx_max_nss[i],
4795 IEEE80211_EHT_MCS_NSS_TX);
4797 for (bw = 0; bw < 3; bw++) {
4798 u8 have, have_rx_nss, have_tx_nss;
4800 have = ieee80211_get_eht_cap_mcs_nss(sta_he_cap,
4803 have_rx_nss = u8_get_bits(have,
4804 IEEE80211_EHT_MCS_NSS_RX);
4805 have_tx_nss = u8_get_bits(have,
4806 IEEE80211_EHT_MCS_NSS_TX);
4808 if (req_rx_nss > have_rx_nss ||
4809 req_tx_nss > have_tx_nss)
4817 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
4818 struct ieee80211_link_data *link,
4819 struct cfg80211_bss *cbss,
4820 ieee80211_conn_flags_t *conn_flags)
4822 struct ieee80211_local *local = sdata->local;
4823 const struct ieee80211_ht_cap *ht_cap = NULL;
4824 const struct ieee80211_ht_operation *ht_oper = NULL;
4825 const struct ieee80211_vht_operation *vht_oper = NULL;
4826 const struct ieee80211_he_operation *he_oper = NULL;
4827 const struct ieee80211_eht_operation *eht_oper = NULL;
4828 const struct ieee80211_s1g_oper_ie *s1g_oper = NULL;
4829 struct ieee80211_supported_band *sband;
4830 struct cfg80211_chan_def chandef;
4831 bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
4832 bool is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ;
4833 struct ieee80211_bss *bss = (void *)cbss->priv;
4834 struct ieee80211_elems_parse_params parse_params = {
4838 struct ieee802_11_elems *elems;
4839 const struct cfg80211_bss_ies *ies;
4846 ies = rcu_dereference(cbss->ies);
4847 parse_params.start = ies->data;
4848 parse_params.len = ies->len;
4849 elems = ieee802_11_parse_elems_full(&parse_params);
4855 sband = local->hw.wiphy->bands[cbss->channel->band];
4857 *conn_flags &= ~(IEEE80211_CONN_DISABLE_40MHZ |
4858 IEEE80211_CONN_DISABLE_80P80MHZ |
4859 IEEE80211_CONN_DISABLE_160MHZ);
4861 /* disable HT/VHT/HE if we don't support them */
4862 if (!sband->ht_cap.ht_supported && !is_6ghz) {
4863 mlme_dbg(sdata, "HT not supported, disabling HT/VHT/HE/EHT\n");
4864 *conn_flags |= IEEE80211_CONN_DISABLE_HT;
4865 *conn_flags |= IEEE80211_CONN_DISABLE_VHT;
4866 *conn_flags |= IEEE80211_CONN_DISABLE_HE;
4867 *conn_flags |= IEEE80211_CONN_DISABLE_EHT;
4870 if (!sband->vht_cap.vht_supported && is_5ghz) {
4871 mlme_dbg(sdata, "VHT not supported, disabling VHT/HE/EHT\n");
4872 *conn_flags |= IEEE80211_CONN_DISABLE_VHT;
4873 *conn_flags |= IEEE80211_CONN_DISABLE_HE;
4874 *conn_flags |= IEEE80211_CONN_DISABLE_EHT;
4877 if (!ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif)) {
4878 mlme_dbg(sdata, "HE not supported, disabling HE and EHT\n");
4879 *conn_flags |= IEEE80211_CONN_DISABLE_HE;
4880 *conn_flags |= IEEE80211_CONN_DISABLE_EHT;
4883 if (!ieee80211_get_eht_iftype_cap_vif(sband, &sdata->vif)) {
4884 mlme_dbg(sdata, "EHT not supported, disabling EHT\n");
4885 *conn_flags |= IEEE80211_CONN_DISABLE_EHT;
4888 if (!(*conn_flags & IEEE80211_CONN_DISABLE_HT) && !is_6ghz) {
4889 ht_oper = elems->ht_operation;
4890 ht_cap = elems->ht_cap_elem;
4893 *conn_flags |= IEEE80211_CONN_DISABLE_HT;
4898 if (!(*conn_flags & IEEE80211_CONN_DISABLE_VHT) && !is_6ghz) {
4899 vht_oper = elems->vht_operation;
4900 if (vht_oper && !ht_oper) {
4903 "AP advertised VHT without HT, disabling HT/VHT/HE\n");
4904 *conn_flags |= IEEE80211_CONN_DISABLE_HT;
4905 *conn_flags |= IEEE80211_CONN_DISABLE_VHT;
4906 *conn_flags |= IEEE80211_CONN_DISABLE_HE;
4907 *conn_flags |= IEEE80211_CONN_DISABLE_EHT;
4910 if (!elems->vht_cap_elem) {
4911 *conn_flags |= IEEE80211_CONN_DISABLE_VHT;
4916 if (!(*conn_flags & IEEE80211_CONN_DISABLE_HE)) {
4917 he_oper = elems->he_operation;
4919 if (link && is_6ghz) {
4920 struct ieee80211_bss_conf *bss_conf;
4923 bss_conf = link->conf;
4925 if (elems->pwr_constr_elem)
4926 bss_conf->pwr_reduction = *elems->pwr_constr_elem;
4928 BUILD_BUG_ON(ARRAY_SIZE(bss_conf->tx_pwr_env) !=
4929 ARRAY_SIZE(elems->tx_pwr_env));
4931 for (i = 0; i < elems->tx_pwr_env_num; i++) {
4932 if (elems->tx_pwr_env_len[i] >
4933 sizeof(bss_conf->tx_pwr_env[j]))
4936 bss_conf->tx_pwr_env_num++;
4937 memcpy(&bss_conf->tx_pwr_env[j], elems->tx_pwr_env[i],
4938 elems->tx_pwr_env_len[i]);
4943 if (!ieee80211_verify_peer_he_mcs_support(sdata, ies, he_oper) ||
4944 !ieee80211_verify_sta_he_mcs_support(sdata, sband, he_oper))
4945 *conn_flags |= IEEE80211_CONN_DISABLE_HE |
4946 IEEE80211_CONN_DISABLE_EHT;
4950 * EHT requires HE to be supported as well. Specifically for 6 GHz
4951 * channels, the operation channel information can only be deduced from
4952 * both the 6 GHz operation information (from the HE operation IE) and
4956 (IEEE80211_CONN_DISABLE_HE |
4957 IEEE80211_CONN_DISABLE_EHT)) &&
4959 const struct cfg80211_bss_ies *cbss_ies;
4960 const struct element *eht_ml_elem;
4961 const u8 *eht_oper_ie;
4963 cbss_ies = rcu_dereference(cbss->ies);
4964 eht_oper_ie = cfg80211_find_ext_ie(WLAN_EID_EXT_EHT_OPERATION,
4965 cbss_ies->data, cbss_ies->len);
4966 if (eht_oper_ie && eht_oper_ie[1] >=
4967 1 + sizeof(struct ieee80211_eht_operation))
4968 eht_oper = (void *)(eht_oper_ie + 3);
4972 if (!ieee80211_verify_sta_eht_mcs_support(sdata, sband, eht_oper))
4973 *conn_flags |= IEEE80211_CONN_DISABLE_EHT;
4975 eht_ml_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_EHT_MULTI_LINK,
4976 cbss_ies->data, cbss_ies->len);
4978 /* data + 1 / datalen - 1 since it's an extended element */
4979 if (!(*conn_flags & IEEE80211_CONN_DISABLE_EHT) &&
4981 ieee80211_mle_type_ok(eht_ml_elem->data + 1,
4982 IEEE80211_ML_CONTROL_TYPE_BASIC,
4983 eht_ml_elem->datalen - 1)) {
4984 sdata->vif.cfg.eml_cap =
4985 ieee80211_mle_get_eml_cap(eht_ml_elem->data + 1);
4986 sdata->vif.cfg.eml_med_sync_delay =
4987 ieee80211_mle_get_eml_med_sync_delay(eht_ml_elem->data + 1);
4991 /* Allow VHT if at least one channel on the sband supports 80 MHz */
4993 for (i = 0; i < sband->n_channels; i++) {
4994 if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
4995 IEEE80211_CHAN_NO_80MHZ))
5003 sdata_info(sdata, "80 MHz not supported, disabling VHT\n");
5004 *conn_flags |= IEEE80211_CONN_DISABLE_VHT;
5007 if (sband->band == NL80211_BAND_S1GHZ) {
5008 s1g_oper = elems->s1g_oper;
5011 "AP missing S1G operation element?\n");
5015 ieee80211_determine_chantype(sdata, link, *conn_flags,
5025 link->needed_rx_chains =
5026 min(ieee80211_max_rx_chains(link, cbss),
5030 /* the element data was RCU protected so no longer valid anyway */
5034 if (*conn_flags & IEEE80211_CONN_DISABLE_HE && is_6ghz) {
5035 sdata_info(sdata, "Rejecting non-HE 6/7 GHz connection");
5042 /* will change later if needed */
5043 link->smps_mode = IEEE80211_SMPS_OFF;
5045 mutex_lock(&local->mtx);
5047 * If this fails (possibly due to channel context sharing
5048 * on incompatible channels, e.g. 80+80 and 160 sharing the
5049 * same control channel) try to use a smaller bandwidth.
5051 ret = ieee80211_link_use_channel(link, &chandef,
5052 IEEE80211_CHANCTX_SHARED);
5054 /* don't downgrade for 5 and 10 MHz channels, though. */
5055 if (chandef.width == NL80211_CHAN_WIDTH_5 ||
5056 chandef.width == NL80211_CHAN_WIDTH_10)
5059 while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
5061 ieee80211_chandef_downgrade(&chandef);
5062 ret = ieee80211_link_use_channel(link, &chandef,
5063 IEEE80211_CHANCTX_SHARED);
5066 mutex_unlock(&local->mtx);
5070 static bool ieee80211_get_dtim(const struct cfg80211_bss_ies *ies,
5071 u8 *dtim_count, u8 *dtim_period)
5073 const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len);
5074 const u8 *idx_ie = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, ies->data,
5076 const struct ieee80211_tim_ie *tim = NULL;
5077 const struct ieee80211_bssid_index *idx;
5078 bool valid = tim_ie && tim_ie[1] >= 2;
5081 tim = (void *)(tim_ie + 2);
5084 *dtim_count = valid ? tim->dtim_count : 0;
5087 *dtim_period = valid ? tim->dtim_period : 0;
5089 /* Check if value is overridden by non-transmitted profile */
5090 if (!idx_ie || idx_ie[1] < 3)
5093 idx = (void *)(idx_ie + 2);
5096 *dtim_count = idx->dtim_count;
5099 *dtim_period = idx->dtim_period;
5104 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
5105 struct ieee80211_mgmt *mgmt,
5106 struct ieee802_11_elems *elems,
5107 const u8 *elem_start, unsigned int elem_len)
5109 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5110 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
5111 struct ieee80211_local *local = sdata->local;
5112 unsigned int link_id;
5113 struct sta_info *sta;
5114 u64 changed[IEEE80211_MLD_MAX_NUM_LINKS] = {};
5115 u16 valid_links = 0, dormant_links = 0;
5118 mutex_lock(&sdata->local->sta_mtx);
5120 * station info was already allocated and inserted before
5121 * the association and should be available to us
5123 sta = sta_info_get(sdata, assoc_data->ap_addr);
5127 if (ieee80211_vif_is_mld(&sdata->vif)) {
5128 for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
5129 if (!assoc_data->link[link_id].bss)
5132 valid_links |= BIT(link_id);
5133 if (assoc_data->link[link_id].disabled)
5134 dormant_links |= BIT(link_id);
5136 if (link_id != assoc_data->assoc_link_id) {
5137 err = ieee80211_sta_allocate_link(sta, link_id);
5143 ieee80211_vif_set_links(sdata, valid_links, dormant_links);
5146 for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
5147 struct cfg80211_bss *cbss = assoc_data->link[link_id].bss;
5148 struct ieee80211_link_data *link;
5149 struct link_sta_info *link_sta;
5154 link = sdata_dereference(sdata->link[link_id], sdata);
5158 if (ieee80211_vif_is_mld(&sdata->vif))
5160 "local address %pM, AP link address %pM%s\n",
5162 assoc_data->link[link_id].bss->bssid,
5163 link_id == assoc_data->assoc_link_id ?
5166 link_sta = rcu_dereference_protected(sta->link[link_id],
5167 lockdep_is_held(&local->sta_mtx));
5168 if (WARN_ON(!link_sta))
5171 if (!link->u.mgd.have_beacon) {
5172 const struct cfg80211_bss_ies *ies;
5175 ies = rcu_dereference(cbss->beacon_ies);
5177 link->u.mgd.have_beacon = true;
5179 ies = rcu_dereference(cbss->ies);
5180 ieee80211_get_dtim(ies,
5181 &link->conf->sync_dtim_count,
5182 &link->u.mgd.dtim_period);
5183 link->conf->beacon_int = cbss->beacon_interval;
5187 link->conf->dtim_period = link->u.mgd.dtim_period ?: 1;
5189 if (link_id != assoc_data->assoc_link_id) {
5190 err = ieee80211_prep_channel(sdata, link, cbss,
5191 &link->u.mgd.conn_flags);
5193 link_info(link, "prep_channel failed\n");
5198 err = ieee80211_mgd_setup_link_sta(link, sta, link_sta,
5199 assoc_data->link[link_id].bss);
5203 if (!ieee80211_assoc_config_link(link, link_sta,
5204 assoc_data->link[link_id].bss,
5205 mgmt, elem_start, elem_len,
5209 if (assoc_data->link[link_id].status != WLAN_STATUS_SUCCESS) {
5210 valid_links &= ~BIT(link_id);
5211 ieee80211_sta_remove_link(sta, link_id);
5215 if (link_id != assoc_data->assoc_link_id) {
5216 err = ieee80211_sta_activate_link(sta, link_id);
5222 /* links might have changed due to rejected ones, set them again */
5223 ieee80211_vif_set_links(sdata, valid_links, dormant_links);
5225 rate_control_rate_init(sta);
5227 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) {
5228 set_sta_flag(sta, WLAN_STA_MFP);
5229 sta->sta.mfp = true;
5231 sta->sta.mfp = false;
5234 ieee80211_sta_set_max_amsdu_subframes(sta, elems->ext_capab,
5235 elems->ext_capab_len);
5237 sta->sta.wme = (elems->wmm_param || elems->s1g_capab) &&
5238 local->hw.queues >= IEEE80211_NUM_ACS;
5240 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
5241 if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
5242 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
5245 "failed to move station %pM to desired state\n",
5247 WARN_ON(__sta_info_destroy(sta));
5251 if (sdata->wdev.use_4addr)
5252 drv_sta_set_4addr(local, sdata, &sta->sta, true);
5254 mutex_unlock(&sdata->local->sta_mtx);
5256 ieee80211_set_associated(sdata, assoc_data, changed);
5259 * If we're using 4-addr mode, let the AP know that we're
5260 * doing so, so that it can create the STA VLAN on its side
5262 if (ifmgd->use_4addr)
5263 ieee80211_send_4addr_nullfunc(local, sdata);
5266 * Start timer to probe the connection to the AP now.
5267 * Also start the timer that will detect beacon loss.
5269 ieee80211_sta_reset_beacon_monitor(sdata);
5270 ieee80211_sta_reset_conn_monitor(sdata);
5274 eth_zero_addr(sdata->vif.cfg.ap_addr);
5275 mutex_unlock(&sdata->local->sta_mtx);
5279 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
5280 struct ieee80211_mgmt *mgmt,
5283 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5284 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
5285 u16 capab_info, status_code, aid;
5286 struct ieee80211_elems_parse_params parse_params = {
5291 struct ieee802_11_elems *elems;
5293 const u8 *elem_start;
5294 unsigned int elem_len;
5296 struct ieee80211_event event = {
5298 .u.mlme.data = ASSOC_EVENT,
5300 struct ieee80211_prep_tx_info info = {};
5301 struct cfg80211_rx_assoc_resp resp = {
5304 u8 ap_mld_addr[ETH_ALEN] __aligned(2);
5305 unsigned int link_id;
5307 sdata_assert_lock(sdata);
5312 if (!ether_addr_equal(assoc_data->ap_addr, mgmt->bssid) ||
5313 !ether_addr_equal(assoc_data->ap_addr, mgmt->sa))
5317 * AssocResp and ReassocResp have identical structure, so process both
5318 * of them in this function.
5324 reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control);
5325 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
5326 status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
5327 if (assoc_data->s1g)
5328 elem_start = mgmt->u.s1g_assoc_resp.variable;
5330 elem_start = mgmt->u.assoc_resp.variable;
5333 * Note: this may not be perfect, AP might misbehave - if
5334 * anyone needs to rely on perfect complete notification
5335 * with the exact right subtype, then we need to track what
5336 * we actually transmitted.
5338 info.subtype = reassoc ? IEEE80211_STYPE_REASSOC_REQ :
5339 IEEE80211_STYPE_ASSOC_REQ;
5341 if (assoc_data->fils_kek_len &&
5342 fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0)
5345 elem_len = len - (elem_start - (u8 *)mgmt);
5346 parse_params.start = elem_start;
5347 parse_params.len = elem_len;
5348 elems = ieee802_11_parse_elems_full(&parse_params);
5352 if (elems->aid_resp)
5353 aid = le16_to_cpu(elems->aid_resp->aid);
5354 else if (assoc_data->s1g)
5357 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
5360 * The 5 MSB of the AID field are reserved
5361 * (802.11-2016 9.4.1.8 AID field)
5366 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
5367 reassoc ? "Rea" : "A", assoc_data->ap_addr,
5368 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
5370 ifmgd->broken_ap = false;
5372 if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
5373 elems->timeout_int &&
5374 elems->timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
5377 cfg80211_assoc_comeback(sdata->dev, assoc_data->ap_addr,
5378 le32_to_cpu(elems->timeout_int->value));
5380 tu = le32_to_cpu(elems->timeout_int->value);
5381 ms = tu * 1024 / 1000;
5383 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
5384 assoc_data->ap_addr, tu, ms);
5385 assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
5386 assoc_data->timeout_started = true;
5387 if (ms > IEEE80211_ASSOC_TIMEOUT)
5388 run_again(sdata, assoc_data->timeout);
5392 if (status_code != WLAN_STATUS_SUCCESS) {
5393 sdata_info(sdata, "%pM denied association (code=%d)\n",
5394 assoc_data->ap_addr, status_code);
5395 event.u.mlme.status = MLME_DENIED;
5396 event.u.mlme.reason = status_code;
5397 drv_event_callback(sdata->local, sdata, &event);
5399 if (aid == 0 || aid > IEEE80211_MAX_AID) {
5401 "invalid AID value %d (out of range), turn off PS\n",
5404 ifmgd->broken_ap = true;
5407 if (ieee80211_vif_is_mld(&sdata->vif)) {
5408 if (!elems->ml_basic) {
5410 "MLO association with %pM but no multi-link element in response!\n",
5411 assoc_data->ap_addr);
5415 if (le16_get_bits(elems->ml_basic->control,
5416 IEEE80211_ML_CONTROL_TYPE) !=
5417 IEEE80211_ML_CONTROL_TYPE_BASIC) {
5419 "bad multi-link element (control=0x%x)\n",
5420 le16_to_cpu(elems->ml_basic->control));
5423 struct ieee80211_mle_basic_common_info *common;
5425 common = (void *)elems->ml_basic->variable;
5427 if (memcmp(assoc_data->ap_addr,
5428 common->mld_mac_addr, ETH_ALEN)) {
5430 "AP MLD MAC address mismatch: got %pM expected %pM\n",
5431 common->mld_mac_addr,
5432 assoc_data->ap_addr);
5438 sdata->vif.cfg.aid = aid;
5440 if (!ieee80211_assoc_success(sdata, mgmt, elems,
5441 elem_start, elem_len)) {
5442 /* oops -- internal error -- send timeout for now */
5443 ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT);
5446 event.u.mlme.status = MLME_SUCCESS;
5447 drv_event_callback(sdata->local, sdata, &event);
5448 sdata_info(sdata, "associated\n");
5453 for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) {
5454 struct ieee80211_link_data *link;
5456 if (!assoc_data->link[link_id].bss)
5459 resp.links[link_id].bss = assoc_data->link[link_id].bss;
5460 ether_addr_copy(resp.links[link_id].addr,
5461 assoc_data->link[link_id].addr);
5462 resp.links[link_id].status = assoc_data->link[link_id].status;
5464 link = sdata_dereference(sdata->link[link_id], sdata);
5468 /* get uapsd queues configuration - same for all links */
5469 resp.uapsd_queues = 0;
5470 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
5471 if (link->tx_conf[ac].uapsd)
5472 resp.uapsd_queues |= ieee80211_ac_to_qos_mask[ac];
5475 if (ieee80211_vif_is_mld(&sdata->vif)) {
5476 ether_addr_copy(ap_mld_addr, sdata->vif.cfg.ap_addr);
5477 resp.ap_mld_addr = ap_mld_addr;
5480 ieee80211_destroy_assoc_data(sdata,
5481 status_code == WLAN_STATUS_SUCCESS ?
5485 resp.buf = (u8 *)mgmt;
5487 resp.req_ies = ifmgd->assoc_req_ies;
5488 resp.req_ies_len = ifmgd->assoc_req_ies_len;
5489 cfg80211_rx_assoc_resp(sdata->dev, &resp);
5491 drv_mgd_complete_tx(sdata->local, sdata, &info);
5495 ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON);
5499 static void ieee80211_rx_bss_info(struct ieee80211_link_data *link,
5500 struct ieee80211_mgmt *mgmt, size_t len,
5501 struct ieee80211_rx_status *rx_status)
5503 struct ieee80211_sub_if_data *sdata = link->sdata;
5504 struct ieee80211_local *local = sdata->local;
5505 struct ieee80211_bss *bss;
5506 struct ieee80211_channel *channel;
5508 sdata_assert_lock(sdata);
5510 channel = ieee80211_get_channel_khz(local->hw.wiphy,
5511 ieee80211_rx_status_to_khz(rx_status));
5515 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, channel);
5517 link->conf->beacon_rate = bss->beacon_rate;
5518 ieee80211_rx_bss_put(local, bss);
5523 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_link_data *link,
5524 struct sk_buff *skb)
5526 struct ieee80211_sub_if_data *sdata = link->sdata;
5527 struct ieee80211_mgmt *mgmt = (void *)skb->data;
5528 struct ieee80211_if_managed *ifmgd;
5529 struct ieee80211_rx_status *rx_status = (void *) skb->cb;
5530 struct ieee80211_channel *channel;
5531 size_t baselen, len = skb->len;
5533 ifmgd = &sdata->u.mgd;
5535 sdata_assert_lock(sdata);
5538 * According to Draft P802.11ax D6.0 clause 26.17.2.3.2:
5539 * "If a 6 GHz AP receives a Probe Request frame and responds with
5540 * a Probe Response frame [..], the Address 1 field of the Probe
5541 * Response frame shall be set to the broadcast address [..]"
5542 * So, on 6GHz band we should also accept broadcast responses.
5544 channel = ieee80211_get_channel(sdata->local->hw.wiphy,
5549 if (!ether_addr_equal(mgmt->da, sdata->vif.addr) &&
5550 (channel->band != NL80211_BAND_6GHZ ||
5551 !is_broadcast_ether_addr(mgmt->da)))
5552 return; /* ignore ProbeResp to foreign address */
5554 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
5558 ieee80211_rx_bss_info(link, mgmt, len, rx_status);
5560 if (ifmgd->associated &&
5561 ether_addr_equal(mgmt->bssid, link->u.mgd.bssid))
5562 ieee80211_reset_ap_probe(sdata);
5566 * This is the canonical list of information elements we care about,
5567 * the filter code also gives us all changes to the Microsoft OUI
5568 * (00:50:F2) vendor IE which is used for WMM which we need to track,
5569 * as well as the DTPC IE (part of the Cisco OUI) used for signaling
5570 * changes to requested client power.
5572 * We implement beacon filtering in software since that means we can
5573 * avoid processing the frame here and in cfg80211, and userspace
5574 * will not be able to tell whether the hardware supports it or not.
5576 * XXX: This list needs to be dynamic -- userspace needs to be able to
5577 * add items it requires. It also needs to be able to tell us to
5578 * look out for other vendor IEs.
5580 static const u64 care_about_ies =
5581 (1ULL << WLAN_EID_COUNTRY) |
5582 (1ULL << WLAN_EID_ERP_INFO) |
5583 (1ULL << WLAN_EID_CHANNEL_SWITCH) |
5584 (1ULL << WLAN_EID_PWR_CONSTRAINT) |
5585 (1ULL << WLAN_EID_HT_CAPABILITY) |
5586 (1ULL << WLAN_EID_HT_OPERATION) |
5587 (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
5589 static void ieee80211_handle_beacon_sig(struct ieee80211_link_data *link,
5590 struct ieee80211_if_managed *ifmgd,
5591 struct ieee80211_bss_conf *bss_conf,
5592 struct ieee80211_local *local,
5593 struct ieee80211_rx_status *rx_status)
5595 struct ieee80211_sub_if_data *sdata = link->sdata;
5597 /* Track average RSSI from the Beacon frames of the current AP */
5599 if (!link->u.mgd.tracking_signal_avg) {
5600 link->u.mgd.tracking_signal_avg = true;
5601 ewma_beacon_signal_init(&link->u.mgd.ave_beacon_signal);
5602 link->u.mgd.last_cqm_event_signal = 0;
5603 link->u.mgd.count_beacon_signal = 1;
5604 link->u.mgd.last_ave_beacon_signal = 0;
5606 link->u.mgd.count_beacon_signal++;
5609 ewma_beacon_signal_add(&link->u.mgd.ave_beacon_signal,
5610 -rx_status->signal);
5612 if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
5613 link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
5614 int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal);
5615 int last_sig = link->u.mgd.last_ave_beacon_signal;
5616 struct ieee80211_event event = {
5621 * if signal crosses either of the boundaries, invoke callback
5622 * with appropriate parameters
5624 if (sig > ifmgd->rssi_max_thold &&
5625 (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
5626 link->u.mgd.last_ave_beacon_signal = sig;
5627 event.u.rssi.data = RSSI_EVENT_HIGH;
5628 drv_event_callback(local, sdata, &event);
5629 } else if (sig < ifmgd->rssi_min_thold &&
5630 (last_sig >= ifmgd->rssi_max_thold ||
5632 link->u.mgd.last_ave_beacon_signal = sig;
5633 event.u.rssi.data = RSSI_EVENT_LOW;
5634 drv_event_callback(local, sdata, &event);
5638 if (bss_conf->cqm_rssi_thold &&
5639 link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
5640 !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
5641 int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal);
5642 int last_event = link->u.mgd.last_cqm_event_signal;
5643 int thold = bss_conf->cqm_rssi_thold;
5644 int hyst = bss_conf->cqm_rssi_hyst;
5647 (last_event == 0 || sig < last_event - hyst)) {
5648 link->u.mgd.last_cqm_event_signal = sig;
5649 ieee80211_cqm_rssi_notify(
5651 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
5653 } else if (sig > thold &&
5654 (last_event == 0 || sig > last_event + hyst)) {
5655 link->u.mgd.last_cqm_event_signal = sig;
5656 ieee80211_cqm_rssi_notify(
5658 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
5663 if (bss_conf->cqm_rssi_low &&
5664 link->u.mgd.count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
5665 int sig = -ewma_beacon_signal_read(&link->u.mgd.ave_beacon_signal);
5666 int last_event = link->u.mgd.last_cqm_event_signal;
5667 int low = bss_conf->cqm_rssi_low;
5668 int high = bss_conf->cqm_rssi_high;
5671 (last_event == 0 || last_event >= low)) {
5672 link->u.mgd.last_cqm_event_signal = sig;
5673 ieee80211_cqm_rssi_notify(
5675 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
5677 } else if (sig > high &&
5678 (last_event == 0 || last_event <= high)) {
5679 link->u.mgd.last_cqm_event_signal = sig;
5680 ieee80211_cqm_rssi_notify(
5682 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
5688 static bool ieee80211_rx_our_beacon(const u8 *tx_bssid,
5689 struct cfg80211_bss *bss)
5691 if (ether_addr_equal(tx_bssid, bss->bssid))
5693 if (!bss->transmitted_bss)
5695 return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid);
5698 static bool ieee80211_config_puncturing(struct ieee80211_link_data *link,
5699 const struct ieee80211_eht_operation *eht_oper,
5702 u16 bitmap = 0, extracted;
5704 if ((eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) &&
5706 IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)) {
5707 const struct ieee80211_eht_operation_info *info =
5708 (void *)eht_oper->optional;
5709 const u8 *disable_subchannel_bitmap = info->optional;
5711 bitmap = get_unaligned_le16(disable_subchannel_bitmap);
5714 extracted = ieee80211_extract_dis_subch_bmap(eht_oper,
5715 &link->conf->chandef,
5718 /* accept if there are no changes */
5719 if (!(*changed & BSS_CHANGED_BANDWIDTH) &&
5720 extracted == link->conf->eht_puncturing)
5723 if (!cfg80211_valid_disable_subchannel_bitmap(&bitmap,
5724 &link->conf->chandef)) {
5726 "Got an invalid disable subchannel bitmap from AP %pM: bitmap = 0x%x, bw = 0x%x. disconnect\n",
5729 link->conf->chandef.width);
5733 ieee80211_handle_puncturing_bitmap(link, eht_oper, bitmap, changed);
5737 static void ieee80211_ml_reconf_work(struct wiphy *wiphy,
5738 struct wiphy_work *work)
5740 struct ieee80211_sub_if_data *sdata =
5741 container_of(work, struct ieee80211_sub_if_data,
5742 u.mgd.ml_reconf_work.work);
5743 u16 new_valid_links, new_active_links, new_dormant_links;
5747 if (!sdata->u.mgd.removed_links) {
5748 sdata_unlock(sdata);
5753 "MLO Reconfiguration: work: valid=0x%x, removed=0x%x\n",
5754 sdata->vif.valid_links, sdata->u.mgd.removed_links);
5756 new_valid_links = sdata->vif.valid_links & ~sdata->u.mgd.removed_links;
5757 if (new_valid_links == sdata->vif.valid_links) {
5758 sdata_unlock(sdata);
5762 if (!new_valid_links ||
5763 !(new_valid_links & ~sdata->vif.dormant_links)) {
5764 sdata_info(sdata, "No valid links after reconfiguration\n");
5769 new_active_links = sdata->vif.active_links & ~sdata->u.mgd.removed_links;
5770 if (new_active_links != sdata->vif.active_links) {
5771 if (!new_active_links)
5773 BIT(ffs(new_valid_links &
5774 ~sdata->vif.dormant_links) - 1);
5776 ret = __ieee80211_set_active_links(&sdata->vif,
5780 "Failed setting active links\n");
5785 new_dormant_links = sdata->vif.dormant_links & ~sdata->u.mgd.removed_links;
5787 ret = ieee80211_vif_set_links(sdata, new_valid_links,
5790 sdata_info(sdata, "Failed setting valid links\n");
5794 cfg80211_links_removed(sdata->dev, sdata->u.mgd.removed_links);
5796 ___ieee80211_disconnect(sdata);
5798 sdata->u.mgd.removed_links = 0;
5800 sdata_unlock(sdata);
5803 static void ieee80211_ml_reconfiguration(struct ieee80211_sub_if_data *sdata,
5804 struct ieee802_11_elems *elems)
5806 const struct ieee80211_multi_link_elem *ml;
5807 const struct element *sub;
5809 unsigned long removed_links = 0;
5810 u16 link_removal_timeout[IEEE80211_MLD_MAX_NUM_LINKS] = {};
5814 if (!ieee80211_vif_is_mld(&sdata->vif) || !elems->ml_reconf)
5817 ml_len = cfg80211_defragment_element(elems->ml_reconf_elem,
5821 elems->scratch + elems->scratch_len -
5825 elems->ml_reconf = (const void *)elems->scratch_pos;
5826 elems->ml_reconf_len = ml_len;
5827 ml = elems->ml_reconf;
5829 /* Directly parse the sub elements as the common information doesn't
5830 * hold any useful information.
5832 for_each_mle_subelement(sub, (u8 *)ml, ml_len) {
5833 struct ieee80211_mle_per_sta_profile *prof = (void *)sub->data;
5834 u8 *pos = prof->variable;
5837 if (sub->id != IEEE80211_MLE_SUBELEM_PER_STA_PROFILE)
5840 if (!ieee80211_mle_reconf_sta_prof_size_ok(sub->data,
5844 control = le16_to_cpu(prof->control);
5845 link_id = control & IEEE80211_MLE_STA_RECONF_CONTROL_LINK_ID;
5847 removed_links |= BIT(link_id);
5849 /* the MAC address should not be included, but handle it */
5851 IEEE80211_MLE_STA_RECONF_CONTROL_STA_MAC_ADDR_PRESENT)
5854 /* According to Draft P802.11be_D3.0, the control should
5855 * include the AP Removal Timer present. If the AP Removal Timer
5856 * is not present assume immediate removal.
5859 IEEE80211_MLE_STA_RECONF_CONTROL_AP_REM_TIMER_PRESENT)
5860 link_removal_timeout[link_id] = le16_to_cpu(*(__le16 *)pos);
5863 removed_links &= sdata->vif.valid_links;
5864 if (!removed_links) {
5865 /* In case the removal was cancelled, abort it */
5866 if (sdata->u.mgd.removed_links) {
5867 sdata->u.mgd.removed_links = 0;
5868 wiphy_delayed_work_cancel(sdata->local->hw.wiphy,
5869 &sdata->u.mgd.ml_reconf_work);
5875 for_each_set_bit(link_id, &removed_links, IEEE80211_MLD_MAX_NUM_LINKS) {
5876 struct ieee80211_bss_conf *link_conf =
5877 sdata_dereference(sdata->vif.link_conf[link_id], sdata);
5881 removed_links &= ~BIT(link_id);
5885 link_delay = link_conf->beacon_int *
5886 link_removal_timeout[link_id];
5891 delay = min(delay, link_delay);
5894 sdata->u.mgd.removed_links = removed_links;
5895 wiphy_delayed_work_queue(sdata->local->hw.wiphy,
5896 &sdata->u.mgd.ml_reconf_work,
5897 TU_TO_JIFFIES(delay));
5900 static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link,
5901 struct ieee80211_hdr *hdr, size_t len,
5902 struct ieee80211_rx_status *rx_status)
5904 struct ieee80211_sub_if_data *sdata = link->sdata;
5905 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5906 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
5907 struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg;
5908 struct ieee80211_mgmt *mgmt = (void *) hdr;
5910 struct ieee802_11_elems *elems;
5911 struct ieee80211_local *local = sdata->local;
5912 struct ieee80211_chanctx_conf *chanctx_conf;
5913 struct ieee80211_supported_band *sband;
5914 struct ieee80211_channel *chan;
5915 struct link_sta_info *link_sta;
5916 struct sta_info *sta;
5921 u8 *bssid, *variable = mgmt->u.beacon.variable;
5922 u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
5923 struct ieee80211_elems_parse_params parse_params = {
5928 sdata_assert_lock(sdata);
5930 /* Process beacon from the current BSS */
5931 bssid = ieee80211_get_bssid(hdr, len, sdata->vif.type);
5932 if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
5933 struct ieee80211_ext *ext = (void *) mgmt;
5935 if (ieee80211_is_s1g_short_beacon(ext->frame_control))
5936 variable = ext->u.s1g_short_beacon.variable;
5938 variable = ext->u.s1g_beacon.variable;
5941 baselen = (u8 *) variable - (u8 *) mgmt;
5945 parse_params.start = variable;
5946 parse_params.len = len - baselen;
5949 chanctx_conf = rcu_dereference(link->conf->chanctx_conf);
5950 if (!chanctx_conf) {
5955 if (ieee80211_rx_status_to_khz(rx_status) !=
5956 ieee80211_channel_to_khz(chanctx_conf->def.chan)) {
5960 chan = chanctx_conf->def.chan;
5963 if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
5964 !WARN_ON(ieee80211_vif_is_mld(&sdata->vif)) &&
5965 ieee80211_rx_our_beacon(bssid, ifmgd->assoc_data->link[0].bss)) {
5966 parse_params.bss = ifmgd->assoc_data->link[0].bss;
5967 elems = ieee802_11_parse_elems_full(&parse_params);
5971 ieee80211_rx_bss_info(link, mgmt, len, rx_status);
5973 if (elems->dtim_period)
5974 link->u.mgd.dtim_period = elems->dtim_period;
5975 link->u.mgd.have_beacon = true;
5976 ifmgd->assoc_data->need_beacon = false;
5977 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
5978 link->conf->sync_tsf =
5979 le64_to_cpu(mgmt->u.beacon.timestamp);
5980 link->conf->sync_device_ts =
5981 rx_status->device_timestamp;
5982 link->conf->sync_dtim_count = elems->dtim_count;
5985 if (elems->mbssid_config_ie)
5986 bss_conf->profile_periodicity =
5987 elems->mbssid_config_ie->profile_periodicity;
5989 bss_conf->profile_periodicity = 0;
5991 if (elems->ext_capab_len >= 11 &&
5992 (elems->ext_capab[10] & WLAN_EXT_CAPA11_EMA_SUPPORT))
5993 bss_conf->ema_ap = true;
5995 bss_conf->ema_ap = false;
5997 /* continue assoc process */
5998 ifmgd->assoc_data->timeout = jiffies;
5999 ifmgd->assoc_data->timeout_started = true;
6000 run_again(sdata, ifmgd->assoc_data->timeout);
6005 if (!ifmgd->associated ||
6006 !ieee80211_rx_our_beacon(bssid, link->u.mgd.bss))
6008 bssid = link->u.mgd.bssid;
6010 if (!(rx_status->flag & RX_FLAG_NO_SIGNAL_VAL))
6011 ieee80211_handle_beacon_sig(link, ifmgd, bss_conf,
6014 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
6015 mlme_dbg_ratelimited(sdata,
6016 "cancelling AP probe due to a received beacon\n");
6017 ieee80211_reset_ap_probe(sdata);
6021 * Push the beacon loss detection into the future since
6022 * we are processing a beacon from the AP just now.
6024 ieee80211_sta_reset_beacon_monitor(sdata);
6026 /* TODO: CRC urrently not calculated on S1G Beacon Compatibility
6027 * element (which carries the beacon interval). Don't forget to add a
6028 * bit to care_about_ies[] above if mac80211 is interested in a
6029 * changing S1G element.
6031 if (!ieee80211_is_s1g_beacon(hdr->frame_control))
6032 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
6033 parse_params.bss = link->u.mgd.bss;
6034 parse_params.filter = care_about_ies;
6035 parse_params.crc = ncrc;
6036 elems = ieee802_11_parse_elems_full(&parse_params);
6041 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
6042 ieee80211_check_tim(elems->tim, elems->tim_len, vif_cfg->aid)) {
6043 if (local->hw.conf.dynamic_ps_timeout > 0) {
6044 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
6045 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
6046 ieee80211_hw_config(local,
6047 IEEE80211_CONF_CHANGE_PS);
6049 ieee80211_send_nullfunc(local, sdata, false);
6050 } else if (!local->pspolling && sdata->u.mgd.powersave) {
6051 local->pspolling = true;
6054 * Here is assumed that the driver will be
6055 * able to send ps-poll frame and receive a
6056 * response even though power save mode is
6057 * enabled, but some drivers might require
6058 * to disable power save here. This needs
6059 * to be investigated.
6061 ieee80211_send_pspoll(local, sdata);
6065 if (sdata->vif.p2p ||
6066 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
6067 struct ieee80211_p2p_noa_attr noa = {};
6070 ret = cfg80211_get_p2p_attr(variable,
6072 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
6073 (u8 *) &noa, sizeof(noa));
6075 if (link->u.mgd.p2p_noa_index != noa.index) {
6076 /* valid noa_attr and index changed */
6077 link->u.mgd.p2p_noa_index = noa.index;
6078 memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
6079 changed |= BSS_CHANGED_P2P_PS;
6081 * make sure we update all information, the CRC
6082 * mechanism doesn't look at P2P attributes.
6084 link->u.mgd.beacon_crc_valid = false;
6086 } else if (link->u.mgd.p2p_noa_index != -1) {
6087 /* noa_attr not found and we had valid noa_attr before */
6088 link->u.mgd.p2p_noa_index = -1;
6089 memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
6090 changed |= BSS_CHANGED_P2P_PS;
6091 link->u.mgd.beacon_crc_valid = false;
6095 if (link->u.mgd.csa_waiting_bcn)
6096 ieee80211_chswitch_post_beacon(link);
6099 * Update beacon timing and dtim count on every beacon appearance. This
6100 * will allow the driver to use the most updated values. Do it before
6101 * comparing this one with last received beacon.
6102 * IMPORTANT: These parameters would possibly be out of sync by the time
6103 * the driver will use them. The synchronized view is currently
6104 * guaranteed only in certain callbacks.
6106 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY) &&
6107 !ieee80211_is_s1g_beacon(hdr->frame_control)) {
6108 link->conf->sync_tsf =
6109 le64_to_cpu(mgmt->u.beacon.timestamp);
6110 link->conf->sync_device_ts =
6111 rx_status->device_timestamp;
6112 link->conf->sync_dtim_count = elems->dtim_count;
6115 if ((ncrc == link->u.mgd.beacon_crc && link->u.mgd.beacon_crc_valid) ||
6116 ieee80211_is_s1g_short_beacon(mgmt->frame_control))
6118 link->u.mgd.beacon_crc = ncrc;
6119 link->u.mgd.beacon_crc_valid = true;
6121 ieee80211_rx_bss_info(link, mgmt, len, rx_status);
6123 ieee80211_sta_process_chanswitch(link, rx_status->mactime,
6124 rx_status->device_timestamp,
6127 if (!link->u.mgd.disable_wmm_tracking &&
6128 ieee80211_sta_wmm_params(local, link, elems->wmm_param,
6129 elems->wmm_param_len,
6130 elems->mu_edca_param_set))
6131 changed |= BSS_CHANGED_QOS;
6134 * If we haven't had a beacon before, tell the driver about the
6135 * DTIM period (and beacon timing if desired) now.
6137 if (!link->u.mgd.have_beacon) {
6138 /* a few bogus AP send dtim_period = 0 or no TIM IE */
6139 bss_conf->dtim_period = elems->dtim_period ?: 1;
6141 changed |= BSS_CHANGED_BEACON_INFO;
6142 link->u.mgd.have_beacon = true;
6144 mutex_lock(&local->iflist_mtx);
6145 ieee80211_recalc_ps(local);
6146 mutex_unlock(&local->iflist_mtx);
6148 ieee80211_recalc_ps_vif(sdata);
6151 if (elems->erp_info) {
6153 erp_value = elems->erp_info[0];
6158 if (!ieee80211_is_s1g_beacon(hdr->frame_control))
6159 changed |= ieee80211_handle_bss_capability(link,
6160 le16_to_cpu(mgmt->u.beacon.capab_info),
6161 erp_valid, erp_value);
6163 mutex_lock(&local->sta_mtx);
6164 sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr);
6165 if (WARN_ON(!sta)) {
6166 mutex_unlock(&local->sta_mtx);
6169 link_sta = rcu_dereference_protected(sta->link[link->link_id],
6170 lockdep_is_held(&local->sta_mtx));
6171 if (WARN_ON(!link_sta)) {
6172 mutex_unlock(&local->sta_mtx);
6176 if (WARN_ON(!link->conf->chandef.chan))
6179 sband = local->hw.wiphy->bands[link->conf->chandef.chan->band];
6181 changed |= ieee80211_recalc_twt_req(sdata, sband, link, link_sta, elems);
6183 if (ieee80211_config_bw(link, elems->ht_cap_elem,
6184 elems->vht_cap_elem, elems->ht_operation,
6185 elems->vht_operation, elems->he_operation,
6186 elems->eht_operation,
6187 elems->s1g_oper, bssid, &changed)) {
6188 mutex_unlock(&local->sta_mtx);
6190 "failed to follow AP %pM bandwidth change, disconnect\n",
6192 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
6193 WLAN_REASON_DEAUTH_LEAVING,
6195 ieee80211_report_disconnect(sdata, deauth_buf,
6196 sizeof(deauth_buf), true,
6197 WLAN_REASON_DEAUTH_LEAVING,
6202 if (elems->opmode_notif)
6203 ieee80211_vht_handle_opmode(sdata, link_sta,
6204 *elems->opmode_notif,
6206 mutex_unlock(&local->sta_mtx);
6208 changed |= ieee80211_handle_pwr_constr(link, chan, mgmt,
6209 elems->country_elem,
6210 elems->country_elem_len,
6211 elems->pwr_constr_elem,
6212 elems->cisco_dtpc_elem);
6214 if (elems->eht_operation &&
6215 !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT)) {
6216 if (!ieee80211_config_puncturing(link, elems->eht_operation,
6218 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
6219 WLAN_REASON_DEAUTH_LEAVING,
6221 ieee80211_report_disconnect(sdata, deauth_buf,
6222 sizeof(deauth_buf), true,
6223 WLAN_REASON_DEAUTH_LEAVING,
6229 ieee80211_ml_reconfiguration(sdata, elems);
6231 ieee80211_link_info_change_notify(sdata, link, changed);
6236 void ieee80211_sta_rx_queued_ext(struct ieee80211_sub_if_data *sdata,
6237 struct sk_buff *skb)
6239 struct ieee80211_link_data *link = &sdata->deflink;
6240 struct ieee80211_rx_status *rx_status;
6241 struct ieee80211_hdr *hdr;
6244 rx_status = (struct ieee80211_rx_status *) skb->cb;
6245 hdr = (struct ieee80211_hdr *) skb->data;
6246 fc = le16_to_cpu(hdr->frame_control);
6249 switch (fc & IEEE80211_FCTL_STYPE) {
6250 case IEEE80211_STYPE_S1G_BEACON:
6251 ieee80211_rx_mgmt_beacon(link, hdr, skb->len, rx_status);
6254 sdata_unlock(sdata);
6257 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
6258 struct sk_buff *skb)
6260 struct ieee80211_link_data *link = &sdata->deflink;
6261 struct ieee80211_rx_status *rx_status;
6262 struct ieee80211_mgmt *mgmt;
6266 rx_status = (struct ieee80211_rx_status *) skb->cb;
6267 mgmt = (struct ieee80211_mgmt *) skb->data;
6268 fc = le16_to_cpu(mgmt->frame_control);
6272 if (rx_status->link_valid) {
6273 link = sdata_dereference(sdata->link[rx_status->link_id],
6279 switch (fc & IEEE80211_FCTL_STYPE) {
6280 case IEEE80211_STYPE_BEACON:
6281 ieee80211_rx_mgmt_beacon(link, (void *)mgmt,
6282 skb->len, rx_status);
6284 case IEEE80211_STYPE_PROBE_RESP:
6285 ieee80211_rx_mgmt_probe_resp(link, skb);
6287 case IEEE80211_STYPE_AUTH:
6288 ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
6290 case IEEE80211_STYPE_DEAUTH:
6291 ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
6293 case IEEE80211_STYPE_DISASSOC:
6294 ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
6296 case IEEE80211_STYPE_ASSOC_RESP:
6297 case IEEE80211_STYPE_REASSOC_RESP:
6298 ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
6300 case IEEE80211_STYPE_ACTION:
6301 if (!sdata->u.mgd.associated ||
6302 !ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr))
6305 if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
6306 struct ieee802_11_elems *elems;
6308 ies_len = skb->len -
6309 offsetof(struct ieee80211_mgmt,
6310 u.action.u.chan_switch.variable);
6315 /* CSA IE cannot be overridden, no need for BSSID */
6316 elems = ieee802_11_parse_elems(
6317 mgmt->u.action.u.chan_switch.variable,
6318 ies_len, true, NULL);
6320 if (elems && !elems->parse_error)
6321 ieee80211_sta_process_chanswitch(link,
6323 rx_status->device_timestamp,
6326 } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
6327 struct ieee802_11_elems *elems;
6329 ies_len = skb->len -
6330 offsetof(struct ieee80211_mgmt,
6331 u.action.u.ext_chan_switch.variable);
6337 * extended CSA IE can't be overridden, no need for
6340 elems = ieee802_11_parse_elems(
6341 mgmt->u.action.u.ext_chan_switch.variable,
6342 ies_len, true, NULL);
6344 if (elems && !elems->parse_error) {
6345 /* for the handling code pretend it was an IE */
6346 elems->ext_chansw_ie =
6347 &mgmt->u.action.u.ext_chan_switch.data;
6349 ieee80211_sta_process_chanswitch(link,
6351 rx_status->device_timestamp,
6360 sdata_unlock(sdata);
6363 static void ieee80211_sta_timer(struct timer_list *t)
6365 struct ieee80211_sub_if_data *sdata =
6366 from_timer(sdata, t, u.mgd.timer);
6368 wiphy_work_queue(sdata->local->hw.wiphy, &sdata->work);
6371 void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
6374 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
6376 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
6379 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
6383 static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
6385 struct ieee80211_local *local = sdata->local;
6386 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6387 struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
6391 struct ieee80211_prep_tx_info info = {
6392 .subtype = IEEE80211_STYPE_AUTH,
6395 sdata_assert_lock(sdata);
6397 if (WARN_ON_ONCE(!auth_data))
6402 if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
6403 sdata_info(sdata, "authentication with %pM timed out\n",
6404 auth_data->ap_addr);
6407 * Most likely AP is not in the range so remove the
6408 * bss struct for that AP.
6410 cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
6415 if (auth_data->algorithm == WLAN_AUTH_SAE)
6416 info.duration = jiffies_to_msecs(IEEE80211_AUTH_TIMEOUT_SAE);
6418 drv_mgd_prepare_tx(local, sdata, &info);
6420 sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
6421 auth_data->ap_addr, auth_data->tries,
6422 IEEE80211_AUTH_MAX_TRIES);
6424 auth_data->expected_transaction = 2;
6426 if (auth_data->algorithm == WLAN_AUTH_SAE) {
6427 trans = auth_data->sae_trans;
6428 status = auth_data->sae_status;
6429 auth_data->expected_transaction = trans;
6432 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
6433 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
6434 IEEE80211_TX_INTFL_MLME_CONN_TX;
6436 ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
6437 auth_data->data, auth_data->data_len,
6438 auth_data->ap_addr, auth_data->ap_addr,
6439 NULL, 0, 0, tx_flags);
6441 if (tx_flags == 0) {
6442 if (auth_data->algorithm == WLAN_AUTH_SAE)
6443 auth_data->timeout = jiffies +
6444 IEEE80211_AUTH_TIMEOUT_SAE;
6446 auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
6448 auth_data->timeout =
6449 round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
6452 auth_data->timeout_started = true;
6453 run_again(sdata, auth_data->timeout);
6458 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
6460 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
6461 struct ieee80211_local *local = sdata->local;
6464 sdata_assert_lock(sdata);
6466 assoc_data->tries++;
6467 if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
6468 sdata_info(sdata, "association with %pM timed out\n",
6469 assoc_data->ap_addr);
6472 * Most likely AP is not in the range so remove the
6473 * bss struct for that AP.
6475 cfg80211_unlink_bss(local->hw.wiphy,
6476 assoc_data->link[assoc_data->assoc_link_id].bss);
6481 sdata_info(sdata, "associate with %pM (try %d/%d)\n",
6482 assoc_data->ap_addr, assoc_data->tries,
6483 IEEE80211_ASSOC_MAX_TRIES);
6484 ret = ieee80211_send_assoc(sdata);
6488 if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
6489 assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
6490 assoc_data->timeout_started = true;
6491 run_again(sdata, assoc_data->timeout);
6493 assoc_data->timeout =
6494 round_jiffies_up(jiffies +
6495 IEEE80211_ASSOC_TIMEOUT_LONG);
6496 assoc_data->timeout_started = true;
6497 run_again(sdata, assoc_data->timeout);
6503 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
6504 __le16 fc, bool acked)
6506 struct ieee80211_local *local = sdata->local;
6508 sdata->u.mgd.status_fc = fc;
6509 sdata->u.mgd.status_acked = acked;
6510 sdata->u.mgd.status_received = true;
6512 wiphy_work_queue(local->hw.wiphy, &sdata->work);
6515 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
6517 struct ieee80211_local *local = sdata->local;
6518 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6522 if (ifmgd->status_received) {
6523 __le16 fc = ifmgd->status_fc;
6524 bool status_acked = ifmgd->status_acked;
6526 ifmgd->status_received = false;
6527 if (ifmgd->auth_data && ieee80211_is_auth(fc)) {
6529 if (ifmgd->auth_data->algorithm ==
6531 ifmgd->auth_data->timeout =
6533 IEEE80211_AUTH_TIMEOUT_SAE;
6535 ifmgd->auth_data->timeout =
6537 IEEE80211_AUTH_TIMEOUT_SHORT;
6538 run_again(sdata, ifmgd->auth_data->timeout);
6540 ifmgd->auth_data->timeout = jiffies - 1;
6542 ifmgd->auth_data->timeout_started = true;
6543 } else if (ifmgd->assoc_data &&
6544 (ieee80211_is_assoc_req(fc) ||
6545 ieee80211_is_reassoc_req(fc))) {
6547 ifmgd->assoc_data->timeout =
6548 jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
6549 run_again(sdata, ifmgd->assoc_data->timeout);
6551 ifmgd->assoc_data->timeout = jiffies - 1;
6553 ifmgd->assoc_data->timeout_started = true;
6557 if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
6558 time_after(jiffies, ifmgd->auth_data->timeout)) {
6559 if (ifmgd->auth_data->done || ifmgd->auth_data->waiting) {
6561 * ok ... we waited for assoc or continuation but
6562 * userspace didn't do it, so kill the auth data
6564 ieee80211_destroy_auth_data(sdata, false);
6565 } else if (ieee80211_auth(sdata)) {
6566 u8 ap_addr[ETH_ALEN];
6567 struct ieee80211_event event = {
6569 .u.mlme.data = AUTH_EVENT,
6570 .u.mlme.status = MLME_TIMEOUT,
6573 memcpy(ap_addr, ifmgd->auth_data->ap_addr, ETH_ALEN);
6575 ieee80211_destroy_auth_data(sdata, false);
6577 cfg80211_auth_timeout(sdata->dev, ap_addr);
6578 drv_event_callback(sdata->local, sdata, &event);
6580 } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
6581 run_again(sdata, ifmgd->auth_data->timeout);
6583 if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
6584 time_after(jiffies, ifmgd->assoc_data->timeout)) {
6585 if ((ifmgd->assoc_data->need_beacon &&
6586 !sdata->deflink.u.mgd.have_beacon) ||
6587 ieee80211_do_assoc(sdata)) {
6588 struct ieee80211_event event = {
6590 .u.mlme.data = ASSOC_EVENT,
6591 .u.mlme.status = MLME_TIMEOUT,
6594 ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT);
6595 drv_event_callback(sdata->local, sdata, &event);
6597 } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
6598 run_again(sdata, ifmgd->assoc_data->timeout);
6600 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
6601 ifmgd->associated) {
6602 u8 *bssid = sdata->deflink.u.mgd.bssid;
6605 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
6606 max_tries = max_nullfunc_tries;
6608 max_tries = max_probe_tries;
6610 /* ACK received for nullfunc probing frame */
6611 if (!ifmgd->probe_send_count)
6612 ieee80211_reset_ap_probe(sdata);
6613 else if (ifmgd->nullfunc_failed) {
6614 if (ifmgd->probe_send_count < max_tries) {
6616 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
6617 bssid, ifmgd->probe_send_count,
6619 ieee80211_mgd_probe_ap_send(sdata);
6622 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
6624 ieee80211_sta_connection_lost(sdata,
6625 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
6628 } else if (time_is_after_jiffies(ifmgd->probe_timeout))
6629 run_again(sdata, ifmgd->probe_timeout);
6630 else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
6632 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
6633 bssid, probe_wait_ms);
6634 ieee80211_sta_connection_lost(sdata,
6635 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
6636 } else if (ifmgd->probe_send_count < max_tries) {
6638 "No probe response from AP %pM after %dms, try %d/%i\n",
6639 bssid, probe_wait_ms,
6640 ifmgd->probe_send_count, max_tries);
6641 ieee80211_mgd_probe_ap_send(sdata);
6644 * We actually lost the connection ... or did we?
6648 "No probe response from AP %pM after %dms, disconnecting.\n",
6649 bssid, probe_wait_ms);
6651 ieee80211_sta_connection_lost(sdata,
6652 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
6656 sdata_unlock(sdata);
6659 static void ieee80211_sta_bcn_mon_timer(struct timer_list *t)
6661 struct ieee80211_sub_if_data *sdata =
6662 from_timer(sdata, t, u.mgd.bcn_mon_timer);
6664 if (WARN_ON(ieee80211_vif_is_mld(&sdata->vif)))
6667 if (sdata->vif.bss_conf.csa_active &&
6668 !sdata->deflink.u.mgd.csa_waiting_bcn)
6671 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
6674 sdata->u.mgd.connection_loss = false;
6675 wiphy_work_queue(sdata->local->hw.wiphy,
6676 &sdata->u.mgd.beacon_connection_loss_work);
6679 static void ieee80211_sta_conn_mon_timer(struct timer_list *t)
6681 struct ieee80211_sub_if_data *sdata =
6682 from_timer(sdata, t, u.mgd.conn_mon_timer);
6683 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6684 struct ieee80211_local *local = sdata->local;
6685 struct sta_info *sta;
6686 unsigned long timeout;
6688 if (WARN_ON(ieee80211_vif_is_mld(&sdata->vif)))
6691 if (sdata->vif.bss_conf.csa_active &&
6692 !sdata->deflink.u.mgd.csa_waiting_bcn)
6695 sta = sta_info_get(sdata, sdata->vif.cfg.ap_addr);
6699 timeout = sta->deflink.status_stats.last_ack;
6700 if (time_before(sta->deflink.status_stats.last_ack, sta->deflink.rx_stats.last_rx))
6701 timeout = sta->deflink.rx_stats.last_rx;
6702 timeout += IEEE80211_CONNECTION_IDLE_TIME;
6704 /* If timeout is after now, then update timer to fire at
6705 * the later date, but do not actually probe at this time.
6707 if (time_is_after_jiffies(timeout)) {
6708 mod_timer(&ifmgd->conn_mon_timer, round_jiffies_up(timeout));
6712 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
6715 static void ieee80211_sta_monitor_work(struct work_struct *work)
6717 struct ieee80211_sub_if_data *sdata =
6718 container_of(work, struct ieee80211_sub_if_data,
6719 u.mgd.monitor_work);
6721 ieee80211_mgd_probe_ap(sdata, false);
6724 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
6726 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
6727 __ieee80211_stop_poll(sdata);
6729 /* let's probe the connection once */
6730 if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
6731 ieee80211_queue_work(&sdata->local->hw,
6732 &sdata->u.mgd.monitor_work);
6737 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
6739 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6740 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
6744 if (ifmgd->auth_data || ifmgd->assoc_data) {
6745 const u8 *ap_addr = ifmgd->auth_data ?
6746 ifmgd->auth_data->ap_addr :
6747 ifmgd->assoc_data->ap_addr;
6750 * If we are trying to authenticate / associate while suspending,
6751 * cfg80211 won't know and won't actually abort those attempts,
6752 * thus we need to do that ourselves.
6754 ieee80211_send_deauth_disassoc(sdata, ap_addr, ap_addr,
6755 IEEE80211_STYPE_DEAUTH,
6756 WLAN_REASON_DEAUTH_LEAVING,
6758 if (ifmgd->assoc_data)
6759 ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON);
6760 if (ifmgd->auth_data)
6761 ieee80211_destroy_auth_data(sdata, false);
6762 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
6763 IEEE80211_DEAUTH_FRAME_LEN,
6767 /* This is a bit of a hack - we should find a better and more generic
6768 * solution to this. Normally when suspending, cfg80211 will in fact
6769 * deauthenticate. However, it doesn't (and cannot) stop an ongoing
6770 * auth (not so important) or assoc (this is the problem) process.
6772 * As a consequence, it can happen that we are in the process of both
6773 * associating and suspending, and receive an association response
6774 * after cfg80211 has checked if it needs to disconnect, but before
6775 * we actually set the flag to drop incoming frames. This will then
6776 * cause the workqueue flush to process the association response in
6777 * the suspend, resulting in a successful association just before it
6778 * tries to remove the interface from the driver, which now though
6779 * has a channel context assigned ... this results in issues.
6781 * To work around this (for now) simply deauth here again if we're
6784 if (ifmgd->associated && !sdata->local->wowlan) {
6786 struct cfg80211_deauth_request req = {
6787 .reason_code = WLAN_REASON_DEAUTH_LEAVING,
6791 memcpy(bssid, sdata->vif.cfg.ap_addr, ETH_ALEN);
6792 ieee80211_mgd_deauth(sdata, &req);
6795 sdata_unlock(sdata);
6799 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
6801 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6804 if (!ifmgd->associated) {
6805 sdata_unlock(sdata);
6809 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
6810 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
6811 mlme_dbg(sdata, "driver requested disconnect after resume\n");
6812 ieee80211_sta_connection_lost(sdata,
6813 WLAN_REASON_UNSPECIFIED,
6815 sdata_unlock(sdata);
6819 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_HW_RESTART) {
6820 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_HW_RESTART;
6821 mlme_dbg(sdata, "driver requested disconnect after hardware restart\n");
6822 ieee80211_sta_connection_lost(sdata,
6823 WLAN_REASON_UNSPECIFIED,
6825 sdata_unlock(sdata);
6829 sdata_unlock(sdata);
6832 static void ieee80211_request_smps_mgd_work(struct wiphy *wiphy,
6833 struct wiphy_work *work)
6835 struct ieee80211_link_data *link =
6836 container_of(work, struct ieee80211_link_data,
6837 u.mgd.request_smps_work);
6839 sdata_lock(link->sdata);
6840 __ieee80211_request_smps_mgd(link->sdata, link,
6841 link->u.mgd.driver_smps_mode);
6842 sdata_unlock(link->sdata);
6845 /* interface setup */
6846 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
6848 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6850 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
6851 wiphy_work_init(&ifmgd->beacon_connection_loss_work,
6852 ieee80211_beacon_connection_loss_work);
6853 wiphy_work_init(&ifmgd->csa_connection_drop_work,
6854 ieee80211_csa_connection_drop_work);
6855 INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
6856 ieee80211_tdls_peer_del_work);
6857 wiphy_delayed_work_init(&ifmgd->ml_reconf_work,
6858 ieee80211_ml_reconf_work);
6859 timer_setup(&ifmgd->timer, ieee80211_sta_timer, 0);
6860 timer_setup(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, 0);
6861 timer_setup(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, 0);
6862 INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk,
6863 ieee80211_sta_handle_tspec_ac_params_wk);
6866 ifmgd->powersave = sdata->wdev.ps;
6867 ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
6868 ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
6869 /* Setup TDLS data */
6870 spin_lock_init(&ifmgd->teardown_lock);
6871 ifmgd->teardown_skb = NULL;
6872 ifmgd->orig_teardown_skb = NULL;
6875 void ieee80211_mgd_setup_link(struct ieee80211_link_data *link)
6877 struct ieee80211_sub_if_data *sdata = link->sdata;
6878 struct ieee80211_local *local = sdata->local;
6879 unsigned int link_id = link->link_id;
6881 link->u.mgd.p2p_noa_index = -1;
6882 link->u.mgd.conn_flags = 0;
6883 link->conf->bssid = link->u.mgd.bssid;
6885 wiphy_work_init(&link->u.mgd.request_smps_work,
6886 ieee80211_request_smps_mgd_work);
6887 if (local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
6888 link->u.mgd.req_smps = IEEE80211_SMPS_AUTOMATIC;
6890 link->u.mgd.req_smps = IEEE80211_SMPS_OFF;
6892 wiphy_delayed_work_init(&link->u.mgd.chswitch_work,
6893 ieee80211_chswitch_work);
6895 if (sdata->u.mgd.assoc_data)
6896 ether_addr_copy(link->conf->addr,
6897 sdata->u.mgd.assoc_data->link[link_id].addr);
6898 else if (!is_valid_ether_addr(link->conf->addr))
6899 eth_random_addr(link->conf->addr);
6902 /* scan finished notification */
6903 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
6905 struct ieee80211_sub_if_data *sdata;
6907 /* Restart STA timers */
6909 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
6910 if (ieee80211_sdata_running(sdata))
6911 ieee80211_restart_sta_timer(sdata);
6916 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
6917 struct cfg80211_bss *cbss, s8 link_id,
6918 const u8 *ap_mld_addr, bool assoc,
6921 struct ieee80211_local *local = sdata->local;
6922 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
6923 struct ieee80211_bss *bss = (void *)cbss->priv;
6924 struct sta_info *new_sta = NULL;
6925 struct ieee80211_link_data *link;
6926 bool have_sta = false;
6932 if (WARN_ON(!ap_mld_addr))
6934 err = ieee80211_vif_set_links(sdata, BIT(link_id), 0);
6936 if (WARN_ON(ap_mld_addr))
6938 ap_mld_addr = cbss->bssid;
6939 err = ieee80211_vif_set_links(sdata, 0, 0);
6947 link = sdata_dereference(sdata->link[link_id], sdata);
6948 if (WARN_ON(!link)) {
6953 if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) {
6958 /* If a reconfig is happening, bail out */
6959 if (local->in_reconfig) {
6966 have_sta = sta_info_get(sdata, ap_mld_addr);
6972 new_sta = sta_info_alloc_with_link(sdata, ap_mld_addr,
6973 link_id, cbss->bssid,
6976 new_sta = sta_info_alloc(sdata, ap_mld_addr, GFP_KERNEL);
6983 new_sta->sta.mlo = mlo;
6987 * Set up the information for the new channel before setting the
6988 * new channel. We can't - completely race-free - change the basic
6989 * rates bitmap and the channel (sband) that it refers to, but if
6990 * we set it up before we at least avoid calling into the driver's
6991 * bss_info_changed() method with invalid information (since we do
6992 * call that from changing the channel - only for IDLE and perhaps
6993 * some others, but ...).
6995 * So to avoid that, just set up all the new information before the
6996 * channel, but tell the driver to apply it only afterwards, since
6997 * it might need the new channel for that.
7000 const struct cfg80211_bss_ies *ies;
7001 struct link_sta_info *link_sta;
7004 link_sta = rcu_dereference(new_sta->link[link_id]);
7005 if (WARN_ON(!link_sta)) {
7007 sta_info_free(local, new_sta);
7012 err = ieee80211_mgd_setup_link_sta(link, new_sta,
7016 sta_info_free(local, new_sta);
7020 memcpy(link->u.mgd.bssid, cbss->bssid, ETH_ALEN);
7022 /* set timing information */
7023 link->conf->beacon_int = cbss->beacon_interval;
7024 ies = rcu_dereference(cbss->beacon_ies);
7026 link->conf->sync_tsf = ies->tsf;
7027 link->conf->sync_device_ts =
7028 bss->device_ts_beacon;
7030 ieee80211_get_dtim(ies,
7031 &link->conf->sync_dtim_count,
7033 } else if (!ieee80211_hw_check(&sdata->local->hw,
7034 TIMING_BEACON_ONLY)) {
7035 ies = rcu_dereference(cbss->proberesp_ies);
7036 /* must be non-NULL since beacon IEs were NULL */
7037 link->conf->sync_tsf = ies->tsf;
7038 link->conf->sync_device_ts =
7039 bss->device_ts_presp;
7040 link->conf->sync_dtim_count = 0;
7042 link->conf->sync_tsf = 0;
7043 link->conf->sync_device_ts = 0;
7044 link->conf->sync_dtim_count = 0;
7049 if (new_sta || override) {
7050 err = ieee80211_prep_channel(sdata, link, cbss,
7051 &link->u.mgd.conn_flags);
7054 sta_info_free(local, new_sta);
7061 * tell driver about BSSID, basic rates and timing
7062 * this was set up above, before setting the channel
7064 ieee80211_link_info_change_notify(sdata, link,
7066 BSS_CHANGED_BASIC_RATES |
7067 BSS_CHANGED_BEACON_INT);
7070 sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
7072 err = sta_info_insert(new_sta);
7076 "failed to insert STA entry for the AP (error %d)\n",
7081 WARN_ON_ONCE(!ether_addr_equal(link->u.mgd.bssid, cbss->bssid));
7083 /* Cancel scan to ensure that nothing interferes with connection */
7084 if (local->scanning)
7085 ieee80211_scan_cancel(local);
7090 ieee80211_link_release_channel(&sdata->deflink);
7091 ieee80211_vif_set_links(sdata, 0, 0);
7096 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
7097 struct cfg80211_auth_request *req)
7099 struct ieee80211_local *local = sdata->local;
7100 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
7101 struct ieee80211_mgd_auth_data *auth_data;
7106 /* prepare auth data structure */
7108 switch (req->auth_type) {
7109 case NL80211_AUTHTYPE_OPEN_SYSTEM:
7110 auth_alg = WLAN_AUTH_OPEN;
7112 case NL80211_AUTHTYPE_SHARED_KEY:
7115 auth_alg = WLAN_AUTH_SHARED_KEY;
7117 case NL80211_AUTHTYPE_FT:
7118 auth_alg = WLAN_AUTH_FT;
7120 case NL80211_AUTHTYPE_NETWORK_EAP:
7121 auth_alg = WLAN_AUTH_LEAP;
7123 case NL80211_AUTHTYPE_SAE:
7124 auth_alg = WLAN_AUTH_SAE;
7126 case NL80211_AUTHTYPE_FILS_SK:
7127 auth_alg = WLAN_AUTH_FILS_SK;
7129 case NL80211_AUTHTYPE_FILS_SK_PFS:
7130 auth_alg = WLAN_AUTH_FILS_SK_PFS;
7132 case NL80211_AUTHTYPE_FILS_PK:
7133 auth_alg = WLAN_AUTH_FILS_PK;
7139 if (ifmgd->assoc_data)
7142 auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len +
7143 req->ie_len, GFP_KERNEL);
7147 memcpy(auth_data->ap_addr,
7148 req->ap_mld_addr ?: req->bss->bssid,
7150 auth_data->bss = req->bss;
7151 auth_data->link_id = req->link_id;
7153 if (req->auth_data_len >= 4) {
7154 if (req->auth_type == NL80211_AUTHTYPE_SAE) {
7155 __le16 *pos = (__le16 *) req->auth_data;
7157 auth_data->sae_trans = le16_to_cpu(pos[0]);
7158 auth_data->sae_status = le16_to_cpu(pos[1]);
7160 memcpy(auth_data->data, req->auth_data + 4,
7161 req->auth_data_len - 4);
7162 auth_data->data_len += req->auth_data_len - 4;
7165 /* Check if continuing authentication or trying to authenticate with the
7166 * same BSS that we were in the process of authenticating with and avoid
7167 * removal and re-addition of the STA entry in
7168 * ieee80211_prep_connection().
7170 cont_auth = ifmgd->auth_data && req->bss == ifmgd->auth_data->bss &&
7171 ifmgd->auth_data->link_id == req->link_id;
7173 if (req->ie && req->ie_len) {
7174 memcpy(&auth_data->data[auth_data->data_len],
7175 req->ie, req->ie_len);
7176 auth_data->data_len += req->ie_len;
7179 if (req->key && req->key_len) {
7180 auth_data->key_len = req->key_len;
7181 auth_data->key_idx = req->key_idx;
7182 memcpy(auth_data->key, req->key, req->key_len);
7185 auth_data->algorithm = auth_alg;
7187 /* try to authenticate/probe */
7189 if (ifmgd->auth_data) {
7190 if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE) {
7191 auth_data->peer_confirmed =
7192 ifmgd->auth_data->peer_confirmed;
7194 ieee80211_destroy_auth_data(sdata, cont_auth);
7197 /* prep auth_data so we don't go into idle on disassoc */
7198 ifmgd->auth_data = auth_data;
7200 /* If this is continuation of an ongoing SAE authentication exchange
7201 * (i.e., request to send SAE Confirm) and the peer has already
7202 * confirmed, mark authentication completed since we are about to send
7205 if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE &&
7206 auth_data->peer_confirmed && auth_data->sae_trans == 2)
7207 ieee80211_mark_sta_auth(sdata);
7209 if (ifmgd->associated) {
7210 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
7213 "disconnect from AP %pM for new auth to %pM\n",
7214 sdata->vif.cfg.ap_addr, auth_data->ap_addr);
7215 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
7216 WLAN_REASON_UNSPECIFIED,
7219 ieee80211_report_disconnect(sdata, frame_buf,
7220 sizeof(frame_buf), true,
7221 WLAN_REASON_UNSPECIFIED,
7225 sdata_info(sdata, "authenticate with %pM\n", auth_data->ap_addr);
7227 /* needed for transmitting the auth frame(s) properly */
7228 memcpy(sdata->vif.cfg.ap_addr, auth_data->ap_addr, ETH_ALEN);
7230 err = ieee80211_prep_connection(sdata, req->bss, req->link_id,
7231 req->ap_mld_addr, cont_auth, false);
7235 err = ieee80211_auth(sdata);
7237 sta_info_destroy_addr(sdata, auth_data->ap_addr);
7241 /* hold our own reference */
7242 cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
7246 if (!ieee80211_vif_is_mld(&sdata->vif)) {
7247 eth_zero_addr(sdata->deflink.u.mgd.bssid);
7248 ieee80211_link_info_change_notify(sdata, &sdata->deflink,
7250 mutex_lock(&sdata->local->mtx);
7251 ieee80211_link_release_channel(&sdata->deflink);
7252 mutex_unlock(&sdata->local->mtx);
7254 ifmgd->auth_data = NULL;
7259 static ieee80211_conn_flags_t
7260 ieee80211_setup_assoc_link(struct ieee80211_sub_if_data *sdata,
7261 struct ieee80211_mgd_assoc_data *assoc_data,
7262 struct cfg80211_assoc_request *req,
7263 ieee80211_conn_flags_t conn_flags,
7264 unsigned int link_id)
7266 struct ieee80211_local *local = sdata->local;
7267 const struct cfg80211_bss_ies *beacon_ies;
7268 struct ieee80211_supported_band *sband;
7269 const struct element *ht_elem, *vht_elem;
7270 struct ieee80211_link_data *link;
7271 struct cfg80211_bss *cbss;
7272 struct ieee80211_bss *bss;
7273 bool is_5ghz, is_6ghz;
7275 cbss = assoc_data->link[link_id].bss;
7279 bss = (void *)cbss->priv;
7281 sband = local->hw.wiphy->bands[cbss->channel->band];
7282 if (WARN_ON(!sband))
7285 link = sdata_dereference(sdata->link[link_id], sdata);
7289 is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ;
7290 is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
7292 /* for MLO connections assume advertising all rates is OK */
7293 if (!req->ap_mld_addr) {
7294 assoc_data->supp_rates = bss->supp_rates;
7295 assoc_data->supp_rates_len = bss->supp_rates_len;
7298 /* copy and link elems for the STA profile */
7299 if (req->links[link_id].elems_len) {
7300 memcpy(assoc_data->ie_pos, req->links[link_id].elems,
7301 req->links[link_id].elems_len);
7302 assoc_data->link[link_id].elems = assoc_data->ie_pos;
7303 assoc_data->link[link_id].elems_len = req->links[link_id].elems_len;
7304 assoc_data->ie_pos += req->links[link_id].elems_len;
7308 ht_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_OPERATION);
7309 if (ht_elem && ht_elem->datalen >= sizeof(struct ieee80211_ht_operation))
7310 assoc_data->link[link_id].ap_ht_param =
7311 ((struct ieee80211_ht_operation *)(ht_elem->data))->ht_param;
7313 conn_flags |= IEEE80211_CONN_DISABLE_HT;
7314 vht_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY);
7315 if (vht_elem && vht_elem->datalen >= sizeof(struct ieee80211_vht_cap)) {
7316 memcpy(&assoc_data->link[link_id].ap_vht_cap, vht_elem->data,
7317 sizeof(struct ieee80211_vht_cap));
7318 } else if (is_5ghz) {
7320 "VHT capa missing/short, disabling VHT/HE/EHT\n");
7321 conn_flags |= IEEE80211_CONN_DISABLE_VHT |
7322 IEEE80211_CONN_DISABLE_HE |
7323 IEEE80211_CONN_DISABLE_EHT;
7327 link->u.mgd.beacon_crc_valid = false;
7328 link->u.mgd.dtim_period = 0;
7329 link->u.mgd.have_beacon = false;
7331 /* override HT/VHT configuration only if the AP and we support it */
7332 if (!(conn_flags & IEEE80211_CONN_DISABLE_HT)) {
7333 struct ieee80211_sta_ht_cap sta_ht_cap;
7335 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
7336 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
7339 link->conf->eht_puncturing = 0;
7342 beacon_ies = rcu_dereference(cbss->beacon_ies);
7344 const struct ieee80211_eht_operation *eht_oper;
7345 const struct element *elem;
7348 ieee80211_get_dtim(beacon_ies, &dtim_count,
7349 &link->u.mgd.dtim_period);
7351 sdata->deflink.u.mgd.have_beacon = true;
7353 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
7354 link->conf->sync_tsf = beacon_ies->tsf;
7355 link->conf->sync_device_ts = bss->device_ts_beacon;
7356 link->conf->sync_dtim_count = dtim_count;
7359 elem = cfg80211_find_ext_elem(WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION,
7360 beacon_ies->data, beacon_ies->len);
7361 if (elem && elem->datalen >= 3)
7362 link->conf->profile_periodicity = elem->data[2];
7364 link->conf->profile_periodicity = 0;
7366 elem = cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY,
7367 beacon_ies->data, beacon_ies->len);
7368 if (elem && elem->datalen >= 11 &&
7369 (elem->data[10] & WLAN_EXT_CAPA11_EMA_SUPPORT))
7370 link->conf->ema_ap = true;
7372 link->conf->ema_ap = false;
7374 elem = cfg80211_find_ext_elem(WLAN_EID_EXT_EHT_OPERATION,
7375 beacon_ies->data, beacon_ies->len);
7376 eht_oper = (const void *)(elem->data + 1);
7379 ieee80211_eht_oper_size_ok((const void *)(elem->data + 1),
7380 elem->datalen - 1) &&
7381 (eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) &&
7382 (eht_oper->params & IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)) {
7383 const struct ieee80211_eht_operation_info *info =
7384 (void *)eht_oper->optional;
7385 const u8 *disable_subchannel_bitmap = info->optional;
7388 bitmap = get_unaligned_le16(disable_subchannel_bitmap);
7389 if (cfg80211_valid_disable_subchannel_bitmap(&bitmap,
7390 &link->conf->chandef))
7391 ieee80211_handle_puncturing_bitmap(link,
7396 conn_flags |= IEEE80211_CONN_DISABLE_EHT;
7401 if (bss->corrupt_data) {
7402 char *corrupt_type = "data";
7404 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
7405 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
7406 corrupt_type = "beacon and probe response";
7408 corrupt_type = "beacon";
7409 } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) {
7410 corrupt_type = "probe response";
7412 sdata_info(sdata, "associating to AP %pM with corrupt %s\n",
7413 cbss->bssid, corrupt_type);
7416 if (link->u.mgd.req_smps == IEEE80211_SMPS_AUTOMATIC) {
7417 if (sdata->u.mgd.powersave)
7418 link->smps_mode = IEEE80211_SMPS_DYNAMIC;
7420 link->smps_mode = IEEE80211_SMPS_OFF;
7422 link->smps_mode = link->u.mgd.req_smps;
7428 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
7429 struct cfg80211_assoc_request *req)
7431 unsigned int assoc_link_id = req->link_id < 0 ? 0 : req->link_id;
7432 struct ieee80211_local *local = sdata->local;
7433 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
7434 struct ieee80211_mgd_assoc_data *assoc_data;
7435 const struct element *ssid_elem;
7436 struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg;
7437 ieee80211_conn_flags_t conn_flags = 0;
7438 struct ieee80211_link_data *link;
7439 struct cfg80211_bss *cbss;
7440 struct ieee80211_bss *bss;
7443 size_t size = sizeof(*assoc_data) + req->ie_len;
7445 for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++)
7446 size += req->links[i].elems_len;
7448 /* FIXME: no support for 4-addr MLO yet */
7449 if (sdata->u.mgd.use_4addr && req->link_id >= 0)
7452 assoc_data = kzalloc(size, GFP_KERNEL);
7456 cbss = req->link_id < 0 ? req->bss : req->links[req->link_id].bss;
7459 ssid_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID);
7460 if (!ssid_elem || ssid_elem->datalen > sizeof(assoc_data->ssid)) {
7465 memcpy(assoc_data->ssid, ssid_elem->data, ssid_elem->datalen);
7466 assoc_data->ssid_len = ssid_elem->datalen;
7467 memcpy(vif_cfg->ssid, assoc_data->ssid, assoc_data->ssid_len);
7468 vif_cfg->ssid_len = assoc_data->ssid_len;
7471 if (req->ap_mld_addr) {
7472 for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++) {
7473 if (!req->links[i].bss)
7475 link = sdata_dereference(sdata->link[i], sdata);
7477 ether_addr_copy(assoc_data->link[i].addr,
7480 eth_random_addr(assoc_data->link[i].addr);
7483 memcpy(assoc_data->link[0].addr, sdata->vif.addr, ETH_ALEN);
7486 assoc_data->s1g = cbss->channel->band == NL80211_BAND_S1GHZ;
7488 memcpy(assoc_data->ap_addr,
7489 req->ap_mld_addr ?: req->bss->bssid,
7492 if (ifmgd->associated) {
7493 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
7496 "disconnect from AP %pM for new assoc to %pM\n",
7497 sdata->vif.cfg.ap_addr, assoc_data->ap_addr);
7498 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
7499 WLAN_REASON_UNSPECIFIED,
7502 ieee80211_report_disconnect(sdata, frame_buf,
7503 sizeof(frame_buf), true,
7504 WLAN_REASON_UNSPECIFIED,
7508 if (ifmgd->auth_data && !ifmgd->auth_data->done) {
7513 if (ifmgd->assoc_data) {
7518 if (ifmgd->auth_data) {
7521 /* keep sta info, bssid if matching */
7522 match = ether_addr_equal(ifmgd->auth_data->ap_addr,
7523 assoc_data->ap_addr) &&
7524 ifmgd->auth_data->link_id == req->link_id;
7525 ieee80211_destroy_auth_data(sdata, match);
7528 /* prepare assoc data */
7530 bss = (void *)cbss->priv;
7531 assoc_data->wmm = bss->wmm_used &&
7532 (local->hw.queues >= IEEE80211_NUM_ACS);
7535 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
7536 * We still associate in non-HT mode (11a/b/g) if any one of these
7537 * ciphers is configured as pairwise.
7538 * We can set this to true for non-11n hardware, that'll be checked
7539 * separately along with the peer capabilities.
7541 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
7542 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
7543 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
7544 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
7545 conn_flags |= IEEE80211_CONN_DISABLE_HT;
7546 conn_flags |= IEEE80211_CONN_DISABLE_VHT;
7547 conn_flags |= IEEE80211_CONN_DISABLE_HE;
7548 conn_flags |= IEEE80211_CONN_DISABLE_EHT;
7549 netdev_info(sdata->dev,
7550 "disabling HT/VHT/HE due to WEP/TKIP use\n");
7554 /* also disable HT/VHT/HE/EHT if the AP doesn't use WMM */
7555 if (!bss->wmm_used) {
7556 conn_flags |= IEEE80211_CONN_DISABLE_HT;
7557 conn_flags |= IEEE80211_CONN_DISABLE_VHT;
7558 conn_flags |= IEEE80211_CONN_DISABLE_HE;
7559 conn_flags |= IEEE80211_CONN_DISABLE_EHT;
7560 netdev_info(sdata->dev,
7561 "disabling HT/VHT/HE as WMM/QoS is not supported by the AP\n");
7564 if (req->flags & ASSOC_REQ_DISABLE_HT) {
7565 mlme_dbg(sdata, "HT disabled by flag, disabling HT/VHT/HE\n");
7566 conn_flags |= IEEE80211_CONN_DISABLE_HT;
7567 conn_flags |= IEEE80211_CONN_DISABLE_VHT;
7568 conn_flags |= IEEE80211_CONN_DISABLE_HE;
7569 conn_flags |= IEEE80211_CONN_DISABLE_EHT;
7572 if (req->flags & ASSOC_REQ_DISABLE_VHT) {
7573 mlme_dbg(sdata, "VHT disabled by flag, disabling VHT\n");
7574 conn_flags |= IEEE80211_CONN_DISABLE_VHT;
7577 if (req->flags & ASSOC_REQ_DISABLE_HE) {
7578 mlme_dbg(sdata, "HE disabled by flag, disabling HE/EHT\n");
7579 conn_flags |= IEEE80211_CONN_DISABLE_HE;
7580 conn_flags |= IEEE80211_CONN_DISABLE_EHT;
7583 if (req->flags & ASSOC_REQ_DISABLE_EHT)
7584 conn_flags |= IEEE80211_CONN_DISABLE_EHT;
7586 memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
7587 memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
7588 sizeof(ifmgd->ht_capa_mask));
7590 memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
7591 memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
7592 sizeof(ifmgd->vht_capa_mask));
7594 memcpy(&ifmgd->s1g_capa, &req->s1g_capa, sizeof(ifmgd->s1g_capa));
7595 memcpy(&ifmgd->s1g_capa_mask, &req->s1g_capa_mask,
7596 sizeof(ifmgd->s1g_capa_mask));
7598 if (req->ie && req->ie_len) {
7599 memcpy(assoc_data->ie, req->ie, req->ie_len);
7600 assoc_data->ie_len = req->ie_len;
7601 assoc_data->ie_pos = assoc_data->ie + assoc_data->ie_len;
7603 assoc_data->ie_pos = assoc_data->ie;
7606 if (req->fils_kek) {
7607 /* should already be checked in cfg80211 - so warn */
7608 if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) {
7612 memcpy(assoc_data->fils_kek, req->fils_kek,
7614 assoc_data->fils_kek_len = req->fils_kek_len;
7617 if (req->fils_nonces)
7618 memcpy(assoc_data->fils_nonces, req->fils_nonces,
7619 2 * FILS_NONCE_LEN);
7621 /* default timeout */
7622 assoc_data->timeout = jiffies;
7623 assoc_data->timeout_started = true;
7625 assoc_data->assoc_link_id = assoc_link_id;
7627 if (req->ap_mld_addr) {
7628 for (i = 0; i < ARRAY_SIZE(assoc_data->link); i++) {
7629 assoc_data->link[i].conn_flags = conn_flags;
7630 assoc_data->link[i].bss = req->links[i].bss;
7631 assoc_data->link[i].disabled = req->links[i].disabled;
7634 /* if there was no authentication, set up the link */
7635 err = ieee80211_vif_set_links(sdata, BIT(assoc_link_id), 0);
7639 assoc_data->link[0].conn_flags = conn_flags;
7640 assoc_data->link[0].bss = cbss;
7643 link = sdata_dereference(sdata->link[assoc_link_id], sdata);
7644 if (WARN_ON(!link)) {
7649 /* keep old conn_flags from ieee80211_prep_channel() from auth */
7650 conn_flags |= link->u.mgd.conn_flags;
7651 conn_flags |= ieee80211_setup_assoc_link(sdata, assoc_data, req,
7652 conn_flags, assoc_link_id);
7653 override = link->u.mgd.conn_flags != conn_flags;
7654 link->u.mgd.conn_flags |= conn_flags;
7656 if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
7657 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK),
7658 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
7659 sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
7661 if (bss->wmm_used && bss->uapsd_supported &&
7662 (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) {
7663 assoc_data->uapsd = true;
7664 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
7666 assoc_data->uapsd = false;
7667 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
7670 if (req->prev_bssid)
7671 memcpy(assoc_data->prev_ap_addr, req->prev_bssid, ETH_ALEN);
7674 ifmgd->mfp = IEEE80211_MFP_REQUIRED;
7675 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
7677 ifmgd->mfp = IEEE80211_MFP_DISABLED;
7678 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
7681 if (req->flags & ASSOC_REQ_USE_RRM)
7682 ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
7684 ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
7686 if (req->crypto.control_port)
7687 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
7689 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
7691 sdata->control_port_protocol = req->crypto.control_port_ethertype;
7692 sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
7693 sdata->control_port_over_nl80211 =
7694 req->crypto.control_port_over_nl80211;
7695 sdata->control_port_no_preauth = req->crypto.control_port_no_preauth;
7697 /* kick off associate process */
7698 ifmgd->assoc_data = assoc_data;
7700 for (i = 0; i < ARRAY_SIZE(assoc_data->link); i++) {
7701 if (!assoc_data->link[i].bss)
7703 if (i == assoc_data->assoc_link_id)
7705 /* only calculate the flags, hence link == NULL */
7706 err = ieee80211_prep_channel(sdata, NULL, assoc_data->link[i].bss,
7707 &assoc_data->link[i].conn_flags);
7712 /* needed for transmitting the assoc frames properly */
7713 memcpy(sdata->vif.cfg.ap_addr, assoc_data->ap_addr, ETH_ALEN);
7715 err = ieee80211_prep_connection(sdata, cbss, req->link_id,
7716 req->ap_mld_addr, true, override);
7720 assoc_data->link[assoc_data->assoc_link_id].conn_flags =
7721 link->u.mgd.conn_flags;
7723 if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC)) {
7724 const struct cfg80211_bss_ies *beacon_ies;
7727 beacon_ies = rcu_dereference(req->bss->beacon_ies);
7731 * Wait up to one beacon interval ...
7732 * should this be more if we miss one?
7734 sdata_info(sdata, "waiting for beacon from %pM\n",
7736 assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
7737 assoc_data->timeout_started = true;
7738 assoc_data->need_beacon = true;
7743 run_again(sdata, assoc_data->timeout);
7747 eth_zero_addr(sdata->deflink.u.mgd.bssid);
7748 ieee80211_link_info_change_notify(sdata, &sdata->deflink,
7750 ifmgd->assoc_data = NULL;
7756 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
7757 struct cfg80211_deauth_request *req)
7759 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
7760 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
7761 bool tx = !req->local_state_change;
7762 struct ieee80211_prep_tx_info info = {
7763 .subtype = IEEE80211_STYPE_DEAUTH,
7766 if (ifmgd->auth_data &&
7767 ether_addr_equal(ifmgd->auth_data->ap_addr, req->bssid)) {
7769 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
7770 req->bssid, req->reason_code,
7771 ieee80211_get_reason_code_string(req->reason_code));
7773 drv_mgd_prepare_tx(sdata->local, sdata, &info);
7774 ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid,
7775 IEEE80211_STYPE_DEAUTH,
7776 req->reason_code, tx,
7778 ieee80211_destroy_auth_data(sdata, false);
7779 ieee80211_report_disconnect(sdata, frame_buf,
7780 sizeof(frame_buf), true,
7781 req->reason_code, false);
7782 drv_mgd_complete_tx(sdata->local, sdata, &info);
7786 if (ifmgd->assoc_data &&
7787 ether_addr_equal(ifmgd->assoc_data->ap_addr, req->bssid)) {
7789 "aborting association with %pM by local choice (Reason: %u=%s)\n",
7790 req->bssid, req->reason_code,
7791 ieee80211_get_reason_code_string(req->reason_code));
7793 drv_mgd_prepare_tx(sdata->local, sdata, &info);
7794 ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid,
7795 IEEE80211_STYPE_DEAUTH,
7796 req->reason_code, tx,
7798 ieee80211_destroy_assoc_data(sdata, ASSOC_ABANDON);
7799 ieee80211_report_disconnect(sdata, frame_buf,
7800 sizeof(frame_buf), true,
7801 req->reason_code, false);
7805 if (ifmgd->associated &&
7806 ether_addr_equal(sdata->vif.cfg.ap_addr, req->bssid)) {
7808 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
7809 req->bssid, req->reason_code,
7810 ieee80211_get_reason_code_string(req->reason_code));
7812 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
7813 req->reason_code, tx, frame_buf);
7814 ieee80211_report_disconnect(sdata, frame_buf,
7815 sizeof(frame_buf), true,
7816 req->reason_code, false);
7817 drv_mgd_complete_tx(sdata->local, sdata, &info);
7824 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
7825 struct cfg80211_disassoc_request *req)
7827 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
7829 if (!sdata->u.mgd.associated ||
7830 memcmp(sdata->vif.cfg.ap_addr, req->ap_addr, ETH_ALEN))
7834 "disassociating from %pM by local choice (Reason: %u=%s)\n",
7835 req->ap_addr, req->reason_code,
7836 ieee80211_get_reason_code_string(req->reason_code));
7838 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
7839 req->reason_code, !req->local_state_change,
7842 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
7843 req->reason_code, false);
7848 void ieee80211_mgd_stop_link(struct ieee80211_link_data *link)
7850 wiphy_work_cancel(link->sdata->local->hw.wiphy,
7851 &link->u.mgd.request_smps_work);
7852 wiphy_delayed_work_cancel(link->sdata->local->hw.wiphy,
7853 &link->u.mgd.chswitch_work);
7856 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
7858 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
7861 * Make sure some work items will not run after this,
7862 * they will not do anything but might not have been
7863 * cancelled when disconnecting.
7865 cancel_work_sync(&ifmgd->monitor_work);
7866 wiphy_work_cancel(sdata->local->hw.wiphy,
7867 &ifmgd->beacon_connection_loss_work);
7868 wiphy_work_cancel(sdata->local->hw.wiphy,
7869 &ifmgd->csa_connection_drop_work);
7870 cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
7871 wiphy_delayed_work_cancel(sdata->local->hw.wiphy,
7872 &ifmgd->ml_reconf_work);
7875 if (ifmgd->assoc_data)
7876 ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT);
7877 if (ifmgd->auth_data)
7878 ieee80211_destroy_auth_data(sdata, false);
7879 spin_lock_bh(&ifmgd->teardown_lock);
7880 if (ifmgd->teardown_skb) {
7881 kfree_skb(ifmgd->teardown_skb);
7882 ifmgd->teardown_skb = NULL;
7883 ifmgd->orig_teardown_skb = NULL;
7885 kfree(ifmgd->assoc_req_ies);
7886 ifmgd->assoc_req_ies = NULL;
7887 ifmgd->assoc_req_ies_len = 0;
7888 spin_unlock_bh(&ifmgd->teardown_lock);
7889 del_timer_sync(&ifmgd->timer);
7890 sdata_unlock(sdata);
7893 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
7894 enum nl80211_cqm_rssi_threshold_event rssi_event,
7898 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
7900 trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level);
7902 cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp);
7904 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
7906 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp)
7908 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
7910 trace_api_cqm_beacon_loss_notify(sdata->local, sdata);
7912 cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp);
7914 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);
7916 static void _ieee80211_enable_rssi_reports(struct ieee80211_sub_if_data *sdata,
7920 trace_api_enable_rssi_reports(sdata, rssi_min_thold, rssi_max_thold);
7922 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
7926 * Scale up threshold values before storing it, as the RSSI averaging
7927 * algorithm uses a scaled up value as well. Change this scaling
7928 * factor if the RSSI averaging algorithm changes.
7930 sdata->u.mgd.rssi_min_thold = rssi_min_thold*16;
7931 sdata->u.mgd.rssi_max_thold = rssi_max_thold*16;
7934 void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
7938 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
7940 WARN_ON(rssi_min_thold == rssi_max_thold ||
7941 rssi_min_thold > rssi_max_thold);
7943 _ieee80211_enable_rssi_reports(sdata, rssi_min_thold,
7946 EXPORT_SYMBOL(ieee80211_enable_rssi_reports);
7948 void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif)
7950 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
7952 _ieee80211_enable_rssi_reports(sdata, 0, 0);
7954 EXPORT_SYMBOL(ieee80211_disable_rssi_reports);