mac80211: exclude AP_VLAN interfaces from tx power calculation
[platform/adaptation/renesas_rcar/renesas_kernel.git] / net / mac80211 / main.c
1 /*
2  * Copyright 2002-2005, Instant802 Networks, Inc.
3  * Copyright 2005-2006, Devicescape Software, Inc.
4  * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10
11 #include <net/mac80211.h>
12 #include <linux/module.h>
13 #include <linux/init.h>
14 #include <linux/netdevice.h>
15 #include <linux/types.h>
16 #include <linux/slab.h>
17 #include <linux/skbuff.h>
18 #include <linux/etherdevice.h>
19 #include <linux/if_arp.h>
20 #include <linux/rtnetlink.h>
21 #include <linux/bitmap.h>
22 #include <linux/pm_qos.h>
23 #include <linux/inetdevice.h>
24 #include <net/net_namespace.h>
25 #include <net/cfg80211.h>
26 #include <net/addrconf.h>
27
28 #include "ieee80211_i.h"
29 #include "driver-ops.h"
30 #include "rate.h"
31 #include "mesh.h"
32 #include "wep.h"
33 #include "led.h"
34 #include "cfg.h"
35 #include "debugfs.h"
36
37 void ieee80211_configure_filter(struct ieee80211_local *local)
38 {
39         u64 mc;
40         unsigned int changed_flags;
41         unsigned int new_flags = 0;
42
43         if (atomic_read(&local->iff_promiscs))
44                 new_flags |= FIF_PROMISC_IN_BSS;
45
46         if (atomic_read(&local->iff_allmultis))
47                 new_flags |= FIF_ALLMULTI;
48
49         if (local->monitors || test_bit(SCAN_SW_SCANNING, &local->scanning) ||
50             test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning))
51                 new_flags |= FIF_BCN_PRBRESP_PROMISC;
52
53         if (local->fif_probe_req || local->probe_req_reg)
54                 new_flags |= FIF_PROBE_REQ;
55
56         if (local->fif_fcsfail)
57                 new_flags |= FIF_FCSFAIL;
58
59         if (local->fif_plcpfail)
60                 new_flags |= FIF_PLCPFAIL;
61
62         if (local->fif_control)
63                 new_flags |= FIF_CONTROL;
64
65         if (local->fif_other_bss)
66                 new_flags |= FIF_OTHER_BSS;
67
68         if (local->fif_pspoll)
69                 new_flags |= FIF_PSPOLL;
70
71         spin_lock_bh(&local->filter_lock);
72         changed_flags = local->filter_flags ^ new_flags;
73
74         mc = drv_prepare_multicast(local, &local->mc_list);
75         spin_unlock_bh(&local->filter_lock);
76
77         /* be a bit nasty */
78         new_flags |= (1<<31);
79
80         drv_configure_filter(local, changed_flags, &new_flags, mc);
81
82         WARN_ON(new_flags & (1<<31));
83
84         local->filter_flags = new_flags & ~(1<<31);
85 }
86
87 static void ieee80211_reconfig_filter(struct work_struct *work)
88 {
89         struct ieee80211_local *local =
90                 container_of(work, struct ieee80211_local, reconfig_filter);
91
92         ieee80211_configure_filter(local);
93 }
94
95 static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
96 {
97         struct ieee80211_sub_if_data *sdata;
98         struct cfg80211_chan_def chandef = {};
99         u32 changed = 0;
100         int power;
101         u32 offchannel_flag;
102
103         offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
104
105         if (local->scan_chandef.chan) {
106                 chandef = local->scan_chandef;
107         } else if (local->tmp_channel) {
108                 chandef.chan = local->tmp_channel;
109                 chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
110                 chandef.center_freq1 = chandef.chan->center_freq;
111         } else
112                 chandef = local->_oper_chandef;
113
114         WARN(!cfg80211_chandef_valid(&chandef),
115              "control:%d MHz width:%d center: %d/%d MHz",
116              chandef.chan->center_freq, chandef.width,
117              chandef.center_freq1, chandef.center_freq2);
118
119         if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
120                 local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
121         else
122                 local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
123
124         offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
125
126         if (offchannel_flag ||
127             !cfg80211_chandef_identical(&local->hw.conf.chandef,
128                                         &local->_oper_chandef)) {
129                 local->hw.conf.chandef = chandef;
130                 changed |= IEEE80211_CONF_CHANGE_CHANNEL;
131         }
132
133         if (!conf_is_ht(&local->hw.conf)) {
134                 /*
135                  * mac80211.h documents that this is only valid
136                  * when the channel is set to an HT type, and
137                  * that otherwise STATIC is used.
138                  */
139                 local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC;
140         } else if (local->hw.conf.smps_mode != local->smps_mode) {
141                 local->hw.conf.smps_mode = local->smps_mode;
142                 changed |= IEEE80211_CONF_CHANGE_SMPS;
143         }
144
145         power = ieee80211_chandef_max_power(&chandef);
146
147         rcu_read_lock();
148         list_for_each_entry_rcu(sdata, &local->interfaces, list) {
149                 if (!rcu_access_pointer(sdata->vif.chanctx_conf))
150                         continue;
151                 if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
152                         continue;
153                 power = min(power, sdata->vif.bss_conf.txpower);
154         }
155         rcu_read_unlock();
156
157         if (local->hw.conf.power_level != power) {
158                 changed |= IEEE80211_CONF_CHANGE_POWER;
159                 local->hw.conf.power_level = power;
160         }
161
162         return changed;
163 }
164
165 int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
166 {
167         int ret = 0;
168
169         might_sleep();
170
171         if (!local->use_chanctx)
172                 changed |= ieee80211_hw_conf_chan(local);
173         else
174                 changed &= ~(IEEE80211_CONF_CHANGE_CHANNEL |
175                              IEEE80211_CONF_CHANGE_POWER);
176
177         if (changed && local->open_count) {
178                 ret = drv_config(local, changed);
179                 /*
180                  * Goal:
181                  * HW reconfiguration should never fail, the driver has told
182                  * us what it can support so it should live up to that promise.
183                  *
184                  * Current status:
185                  * rfkill is not integrated with mac80211 and a
186                  * configuration command can thus fail if hardware rfkill
187                  * is enabled
188                  *
189                  * FIXME: integrate rfkill with mac80211 and then add this
190                  * WARN_ON() back
191                  *
192                  */
193                 /* WARN_ON(ret); */
194         }
195
196         return ret;
197 }
198
199 void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
200                                       u32 changed)
201 {
202         struct ieee80211_local *local = sdata->local;
203
204         if (!changed)
205                 return;
206
207         drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed);
208 }
209
210 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
211 {
212         sdata->vif.bss_conf.use_cts_prot = false;
213         sdata->vif.bss_conf.use_short_preamble = false;
214         sdata->vif.bss_conf.use_short_slot = false;
215         return BSS_CHANGED_ERP_CTS_PROT |
216                BSS_CHANGED_ERP_PREAMBLE |
217                BSS_CHANGED_ERP_SLOT;
218 }
219
220 static void ieee80211_tasklet_handler(unsigned long data)
221 {
222         struct ieee80211_local *local = (struct ieee80211_local *) data;
223         struct sk_buff *skb;
224
225         while ((skb = skb_dequeue(&local->skb_queue)) ||
226                (skb = skb_dequeue(&local->skb_queue_unreliable))) {
227                 switch (skb->pkt_type) {
228                 case IEEE80211_RX_MSG:
229                         /* Clear skb->pkt_type in order to not confuse kernel
230                          * netstack. */
231                         skb->pkt_type = 0;
232                         ieee80211_rx(&local->hw, skb);
233                         break;
234                 case IEEE80211_TX_STATUS_MSG:
235                         skb->pkt_type = 0;
236                         ieee80211_tx_status(&local->hw, skb);
237                         break;
238                 default:
239                         WARN(1, "mac80211: Packet is of unknown type %d\n",
240                              skb->pkt_type);
241                         dev_kfree_skb(skb);
242                         break;
243                 }
244         }
245 }
246
247 static void ieee80211_restart_work(struct work_struct *work)
248 {
249         struct ieee80211_local *local =
250                 container_of(work, struct ieee80211_local, restart_work);
251
252         /* wait for scan work complete */
253         flush_workqueue(local->workqueue);
254
255         WARN(test_bit(SCAN_HW_SCANNING, &local->scanning),
256              "%s called with hardware scan in progress\n", __func__);
257
258         rtnl_lock();
259         ieee80211_scan_cancel(local);
260         ieee80211_reconfig(local);
261         rtnl_unlock();
262 }
263
264 void ieee80211_restart_hw(struct ieee80211_hw *hw)
265 {
266         struct ieee80211_local *local = hw_to_local(hw);
267
268         trace_api_restart_hw(local);
269
270         wiphy_info(hw->wiphy,
271                    "Hardware restart was requested\n");
272
273         /* use this reason, ieee80211_reconfig will unblock it */
274         ieee80211_stop_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
275                                         IEEE80211_QUEUE_STOP_REASON_SUSPEND);
276
277         /*
278          * Stop all Rx during the reconfig. We don't want state changes
279          * or driver callbacks while this is in progress.
280          */
281         local->in_reconfig = true;
282         barrier();
283
284         schedule_work(&local->restart_work);
285 }
286 EXPORT_SYMBOL(ieee80211_restart_hw);
287
288 #ifdef CONFIG_INET
289 static int ieee80211_ifa_changed(struct notifier_block *nb,
290                                  unsigned long data, void *arg)
291 {
292         struct in_ifaddr *ifa = arg;
293         struct ieee80211_local *local =
294                 container_of(nb, struct ieee80211_local,
295                              ifa_notifier);
296         struct net_device *ndev = ifa->ifa_dev->dev;
297         struct wireless_dev *wdev = ndev->ieee80211_ptr;
298         struct in_device *idev;
299         struct ieee80211_sub_if_data *sdata;
300         struct ieee80211_bss_conf *bss_conf;
301         struct ieee80211_if_managed *ifmgd;
302         int c = 0;
303
304         /* Make sure it's our interface that got changed */
305         if (!wdev)
306                 return NOTIFY_DONE;
307
308         if (wdev->wiphy != local->hw.wiphy)
309                 return NOTIFY_DONE;
310
311         sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
312         bss_conf = &sdata->vif.bss_conf;
313
314         /* ARP filtering is only supported in managed mode */
315         if (sdata->vif.type != NL80211_IFTYPE_STATION)
316                 return NOTIFY_DONE;
317
318         idev = __in_dev_get_rtnl(sdata->dev);
319         if (!idev)
320                 return NOTIFY_DONE;
321
322         ifmgd = &sdata->u.mgd;
323         sdata_lock(sdata);
324
325         /* Copy the addresses to the bss_conf list */
326         ifa = idev->ifa_list;
327         while (ifa) {
328                 if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN)
329                         bss_conf->arp_addr_list[c] = ifa->ifa_address;
330                 ifa = ifa->ifa_next;
331                 c++;
332         }
333
334         bss_conf->arp_addr_cnt = c;
335
336         /* Configure driver only if associated (which also implies it is up) */
337         if (ifmgd->associated)
338                 ieee80211_bss_info_change_notify(sdata,
339                                                  BSS_CHANGED_ARP_FILTER);
340
341         sdata_unlock(sdata);
342
343         return NOTIFY_DONE;
344 }
345 #endif
346
347 #if IS_ENABLED(CONFIG_IPV6)
348 static int ieee80211_ifa6_changed(struct notifier_block *nb,
349                                   unsigned long data, void *arg)
350 {
351         struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg;
352         struct inet6_dev *idev = ifa->idev;
353         struct net_device *ndev = ifa->idev->dev;
354         struct ieee80211_local *local =
355                 container_of(nb, struct ieee80211_local, ifa6_notifier);
356         struct wireless_dev *wdev = ndev->ieee80211_ptr;
357         struct ieee80211_sub_if_data *sdata;
358
359         /* Make sure it's our interface that got changed */
360         if (!wdev || wdev->wiphy != local->hw.wiphy)
361                 return NOTIFY_DONE;
362
363         sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
364
365         /*
366          * For now only support station mode. This is mostly because
367          * doing AP would have to handle AP_VLAN in some way ...
368          */
369         if (sdata->vif.type != NL80211_IFTYPE_STATION)
370                 return NOTIFY_DONE;
371
372         drv_ipv6_addr_change(local, sdata, idev);
373
374         return NOTIFY_DONE;
375 }
376 #endif
377
378 /* There isn't a lot of sense in it, but you can transmit anything you like */
379 static const struct ieee80211_txrx_stypes
380 ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
381         [NL80211_IFTYPE_ADHOC] = {
382                 .tx = 0xffff,
383                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
384                         BIT(IEEE80211_STYPE_AUTH >> 4) |
385                         BIT(IEEE80211_STYPE_DEAUTH >> 4) |
386                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
387         },
388         [NL80211_IFTYPE_STATION] = {
389                 .tx = 0xffff,
390                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
391                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
392         },
393         [NL80211_IFTYPE_AP] = {
394                 .tx = 0xffff,
395                 .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
396                         BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
397                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
398                         BIT(IEEE80211_STYPE_DISASSOC >> 4) |
399                         BIT(IEEE80211_STYPE_AUTH >> 4) |
400                         BIT(IEEE80211_STYPE_DEAUTH >> 4) |
401                         BIT(IEEE80211_STYPE_ACTION >> 4),
402         },
403         [NL80211_IFTYPE_AP_VLAN] = {
404                 /* copy AP */
405                 .tx = 0xffff,
406                 .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
407                         BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
408                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
409                         BIT(IEEE80211_STYPE_DISASSOC >> 4) |
410                         BIT(IEEE80211_STYPE_AUTH >> 4) |
411                         BIT(IEEE80211_STYPE_DEAUTH >> 4) |
412                         BIT(IEEE80211_STYPE_ACTION >> 4),
413         },
414         [NL80211_IFTYPE_P2P_CLIENT] = {
415                 .tx = 0xffff,
416                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
417                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
418         },
419         [NL80211_IFTYPE_P2P_GO] = {
420                 .tx = 0xffff,
421                 .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
422                         BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
423                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
424                         BIT(IEEE80211_STYPE_DISASSOC >> 4) |
425                         BIT(IEEE80211_STYPE_AUTH >> 4) |
426                         BIT(IEEE80211_STYPE_DEAUTH >> 4) |
427                         BIT(IEEE80211_STYPE_ACTION >> 4),
428         },
429         [NL80211_IFTYPE_MESH_POINT] = {
430                 .tx = 0xffff,
431                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
432                         BIT(IEEE80211_STYPE_AUTH >> 4) |
433                         BIT(IEEE80211_STYPE_DEAUTH >> 4),
434         },
435         [NL80211_IFTYPE_P2P_DEVICE] = {
436                 .tx = 0xffff,
437                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
438                         BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
439         },
440 };
441
442 static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = {
443         .ampdu_params_info = IEEE80211_HT_AMPDU_PARM_FACTOR |
444                              IEEE80211_HT_AMPDU_PARM_DENSITY,
445
446         .cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
447                                 IEEE80211_HT_CAP_MAX_AMSDU |
448                                 IEEE80211_HT_CAP_SGI_20 |
449                                 IEEE80211_HT_CAP_SGI_40),
450         .mcs = {
451                 .rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff,
452                              0xff, 0xff, 0xff, 0xff, 0xff, },
453         },
454 };
455
456 static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = {
457         .vht_cap_info =
458                 cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC |
459                             IEEE80211_VHT_CAP_SHORT_GI_80 |
460                             IEEE80211_VHT_CAP_SHORT_GI_160 |
461                             IEEE80211_VHT_CAP_RXSTBC_1 |
462                             IEEE80211_VHT_CAP_RXSTBC_2 |
463                             IEEE80211_VHT_CAP_RXSTBC_3 |
464                             IEEE80211_VHT_CAP_RXSTBC_4 |
465                             IEEE80211_VHT_CAP_TXSTBC |
466                             IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
467                             IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
468                             IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN |
469                             IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
470                             IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK),
471         .supp_mcs = {
472                 .rx_mcs_map = cpu_to_le16(~0),
473                 .tx_mcs_map = cpu_to_le16(~0),
474         },
475 };
476
477 static const u8 extended_capabilities[] = {
478         0, 0, 0, 0, 0, 0, 0,
479         WLAN_EXT_CAPA8_OPMODE_NOTIF,
480 };
481
482 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
483                                         const struct ieee80211_ops *ops)
484 {
485         struct ieee80211_local *local;
486         int priv_size, i;
487         struct wiphy *wiphy;
488         bool use_chanctx;
489
490         if (WARN_ON(!ops->tx || !ops->start || !ops->stop || !ops->config ||
491                     !ops->add_interface || !ops->remove_interface ||
492                     !ops->configure_filter))
493                 return NULL;
494
495         if (WARN_ON(ops->sta_state && (ops->sta_add || ops->sta_remove)))
496                 return NULL;
497
498         /* check all or no channel context operations exist */
499         i = !!ops->add_chanctx + !!ops->remove_chanctx +
500             !!ops->change_chanctx + !!ops->assign_vif_chanctx +
501             !!ops->unassign_vif_chanctx;
502         if (WARN_ON(i != 0 && i != 5))
503                 return NULL;
504         use_chanctx = i == 5;
505
506         /* Ensure 32-byte alignment of our private data and hw private data.
507          * We use the wiphy priv data for both our ieee80211_local and for
508          * the driver's private data
509          *
510          * In memory it'll be like this:
511          *
512          * +-------------------------+
513          * | struct wiphy           |
514          * +-------------------------+
515          * | struct ieee80211_local  |
516          * +-------------------------+
517          * | driver's private data   |
518          * +-------------------------+
519          *
520          */
521         priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len;
522
523         wiphy = wiphy_new(&mac80211_config_ops, priv_size);
524
525         if (!wiphy)
526                 return NULL;
527
528         wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes;
529
530         wiphy->privid = mac80211_wiphy_privid;
531
532         wiphy->flags |= WIPHY_FLAG_NETNS_OK |
533                         WIPHY_FLAG_4ADDR_AP |
534                         WIPHY_FLAG_4ADDR_STATION |
535                         WIPHY_FLAG_REPORTS_OBSS |
536                         WIPHY_FLAG_OFFCHAN_TX;
537
538         wiphy->extended_capabilities = extended_capabilities;
539         wiphy->extended_capabilities_mask = extended_capabilities;
540         wiphy->extended_capabilities_len = ARRAY_SIZE(extended_capabilities);
541
542         if (ops->remain_on_channel)
543                 wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
544
545         wiphy->features |= NL80211_FEATURE_SK_TX_STATUS |
546                            NL80211_FEATURE_SAE |
547                            NL80211_FEATURE_HT_IBSS |
548                            NL80211_FEATURE_VIF_TXPOWER |
549                            NL80211_FEATURE_USERSPACE_MPM;
550
551         if (!ops->hw_scan)
552                 wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
553                                    NL80211_FEATURE_AP_SCAN;
554
555
556         if (!ops->set_key)
557                 wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
558
559         wiphy->bss_priv_size = sizeof(struct ieee80211_bss);
560
561         local = wiphy_priv(wiphy);
562
563         local->hw.wiphy = wiphy;
564
565         local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
566
567         local->ops = ops;
568         local->use_chanctx = use_chanctx;
569
570         /* set up some defaults */
571         local->hw.queues = 1;
572         local->hw.max_rates = 1;
573         local->hw.max_report_rates = 0;
574         local->hw.max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
575         local->hw.max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
576         local->hw.offchannel_tx_hw_queue = IEEE80211_INVAL_HW_QUEUE;
577         local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
578         local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
579         local->hw.radiotap_mcs_details = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
580                                          IEEE80211_RADIOTAP_MCS_HAVE_GI |
581                                          IEEE80211_RADIOTAP_MCS_HAVE_BW;
582         local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
583                                          IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
584         local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES;
585         local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN;
586         local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
587         wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask;
588         wiphy->vht_capa_mod_mask = &mac80211_vht_capa_mod_mask;
589
590         INIT_LIST_HEAD(&local->interfaces);
591
592         __hw_addr_init(&local->mc_list);
593
594         mutex_init(&local->iflist_mtx);
595         mutex_init(&local->mtx);
596
597         mutex_init(&local->key_mtx);
598         spin_lock_init(&local->filter_lock);
599         spin_lock_init(&local->rx_path_lock);
600         spin_lock_init(&local->queue_stop_reason_lock);
601
602         INIT_LIST_HEAD(&local->chanctx_list);
603         mutex_init(&local->chanctx_mtx);
604
605         INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
606
607         INIT_WORK(&local->restart_work, ieee80211_restart_work);
608
609         INIT_WORK(&local->radar_detected_work,
610                   ieee80211_dfs_radar_detected_work);
611
612         INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
613         local->smps_mode = IEEE80211_SMPS_OFF;
614
615         INIT_WORK(&local->dynamic_ps_enable_work,
616                   ieee80211_dynamic_ps_enable_work);
617         INIT_WORK(&local->dynamic_ps_disable_work,
618                   ieee80211_dynamic_ps_disable_work);
619         setup_timer(&local->dynamic_ps_timer,
620                     ieee80211_dynamic_ps_timer, (unsigned long) local);
621
622         INIT_WORK(&local->sched_scan_stopped_work,
623                   ieee80211_sched_scan_stopped_work);
624
625         spin_lock_init(&local->ack_status_lock);
626         idr_init(&local->ack_status_frames);
627
628         sta_info_init(local);
629
630         for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
631                 skb_queue_head_init(&local->pending[i]);
632                 atomic_set(&local->agg_queue_stop[i], 0);
633         }
634         tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
635                      (unsigned long)local);
636
637         tasklet_init(&local->tasklet,
638                      ieee80211_tasklet_handler,
639                      (unsigned long) local);
640
641         skb_queue_head_init(&local->skb_queue);
642         skb_queue_head_init(&local->skb_queue_unreliable);
643
644         ieee80211_led_names(local);
645
646         ieee80211_roc_setup(local);
647
648         return &local->hw;
649 }
650 EXPORT_SYMBOL(ieee80211_alloc_hw);
651
652 static int ieee80211_init_cipher_suites(struct ieee80211_local *local)
653 {
654         bool have_wep = !(IS_ERR(local->wep_tx_tfm) ||
655                           IS_ERR(local->wep_rx_tfm));
656         bool have_mfp = local->hw.flags & IEEE80211_HW_MFP_CAPABLE;
657         const struct ieee80211_cipher_scheme *cs = local->hw.cipher_schemes;
658         int n_suites = 0, r = 0, w = 0;
659         u32 *suites;
660         static const u32 cipher_suites[] = {
661                 /* keep WEP first, it may be removed below */
662                 WLAN_CIPHER_SUITE_WEP40,
663                 WLAN_CIPHER_SUITE_WEP104,
664                 WLAN_CIPHER_SUITE_TKIP,
665                 WLAN_CIPHER_SUITE_CCMP,
666
667                 /* keep last -- depends on hw flags! */
668                 WLAN_CIPHER_SUITE_AES_CMAC
669         };
670
671         /* Driver specifies the ciphers, we have nothing to do... */
672         if (local->hw.wiphy->cipher_suites && have_wep)
673                 return 0;
674
675         /* Set up cipher suites if driver relies on mac80211 cipher defs */
676         if (!local->hw.wiphy->cipher_suites && !cs) {
677                 local->hw.wiphy->cipher_suites = cipher_suites;
678                 local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
679
680                 if (!have_mfp)
681                         local->hw.wiphy->n_cipher_suites--;
682
683                 if (!have_wep) {
684                         local->hw.wiphy->cipher_suites += 2;
685                         local->hw.wiphy->n_cipher_suites -= 2;
686                 }
687
688                 return 0;
689         }
690
691         if (!local->hw.wiphy->cipher_suites) {
692                 /*
693                  * Driver specifies cipher schemes only
694                  * We start counting ciphers defined by schemes, TKIP and CCMP
695                  */
696                 n_suites = local->hw.n_cipher_schemes + 2;
697
698                 /* check if we have WEP40 and WEP104 */
699                 if (have_wep)
700                         n_suites += 2;
701
702                 /* check if we have AES_CMAC */
703                 if (have_mfp)
704                         n_suites++;
705
706                 suites = kmalloc(sizeof(u32) * n_suites, GFP_KERNEL);
707                 if (!suites)
708                         return -ENOMEM;
709
710                 suites[w++] = WLAN_CIPHER_SUITE_CCMP;
711                 suites[w++] = WLAN_CIPHER_SUITE_TKIP;
712
713                 if (have_wep) {
714                         suites[w++] = WLAN_CIPHER_SUITE_WEP40;
715                         suites[w++] = WLAN_CIPHER_SUITE_WEP104;
716                 }
717
718                 if (have_mfp)
719                         suites[w++] = WLAN_CIPHER_SUITE_AES_CMAC;
720
721                 for (r = 0; r < local->hw.n_cipher_schemes; r++)
722                         suites[w++] = cs[r].cipher;
723         } else {
724                 /* Driver provides cipher suites, but we need to exclude WEP */
725                 suites = kmemdup(local->hw.wiphy->cipher_suites,
726                                  sizeof(u32) * local->hw.wiphy->n_cipher_suites,
727                                  GFP_KERNEL);
728                 if (!suites)
729                         return -ENOMEM;
730
731                 for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) {
732                         u32 suite = local->hw.wiphy->cipher_suites[r];
733
734                         if (suite == WLAN_CIPHER_SUITE_WEP40 ||
735                             suite == WLAN_CIPHER_SUITE_WEP104)
736                                 continue;
737                         suites[w++] = suite;
738                 }
739         }
740
741         local->hw.wiphy->cipher_suites = suites;
742         local->hw.wiphy->n_cipher_suites = w;
743         local->wiphy_ciphers_allocated = true;
744
745         return 0;
746 }
747
748 int ieee80211_register_hw(struct ieee80211_hw *hw)
749 {
750         struct ieee80211_local *local = hw_to_local(hw);
751         int result, i;
752         enum ieee80211_band band;
753         int channels, max_bitrates;
754         bool supp_ht, supp_vht;
755         netdev_features_t feature_whitelist;
756         struct cfg80211_chan_def dflt_chandef = {};
757
758         if (hw->flags & IEEE80211_HW_QUEUE_CONTROL &&
759             (local->hw.offchannel_tx_hw_queue == IEEE80211_INVAL_HW_QUEUE ||
760              local->hw.offchannel_tx_hw_queue >= local->hw.queues))
761                 return -EINVAL;
762
763 #ifdef CONFIG_PM
764         if (hw->wiphy->wowlan && (!local->ops->suspend || !local->ops->resume))
765                 return -EINVAL;
766 #endif
767
768         if (!local->use_chanctx) {
769                 for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
770                         const struct ieee80211_iface_combination *comb;
771
772                         comb = &local->hw.wiphy->iface_combinations[i];
773
774                         if (comb->num_different_channels > 1)
775                                 return -EINVAL;
776                 }
777         } else {
778                 /*
779                  * WDS is currently prohibited when channel contexts are used
780                  * because there's no clear definition of which channel WDS
781                  * type interfaces use
782                  */
783                 if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS))
784                         return -EINVAL;
785
786                 /* DFS currently not supported with channel context drivers */
787                 for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
788                         const struct ieee80211_iface_combination *comb;
789
790                         comb = &local->hw.wiphy->iface_combinations[i];
791
792                         if (comb->radar_detect_widths)
793                                 return -EINVAL;
794                 }
795         }
796
797         /* Only HW csum features are currently compatible with mac80211 */
798         feature_whitelist = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
799                             NETIF_F_HW_CSUM;
800         if (WARN_ON(hw->netdev_features & ~feature_whitelist))
801                 return -EINVAL;
802
803         if (hw->max_report_rates == 0)
804                 hw->max_report_rates = hw->max_rates;
805
806         local->rx_chains = 1;
807
808         /*
809          * generic code guarantees at least one band,
810          * set this very early because much code assumes
811          * that hw.conf.channel is assigned
812          */
813         channels = 0;
814         max_bitrates = 0;
815         supp_ht = false;
816         supp_vht = false;
817         for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
818                 struct ieee80211_supported_band *sband;
819
820                 sband = local->hw.wiphy->bands[band];
821                 if (!sband)
822                         continue;
823
824                 if (!dflt_chandef.chan) {
825                         cfg80211_chandef_create(&dflt_chandef,
826                                                 &sband->channels[0],
827                                                 NL80211_CHAN_NO_HT);
828                         /* init channel we're on */
829                         if (!local->use_chanctx && !local->_oper_chandef.chan) {
830                                 local->hw.conf.chandef = dflt_chandef;
831                                 local->_oper_chandef = dflt_chandef;
832                         }
833                         local->monitor_chandef = dflt_chandef;
834                 }
835
836                 channels += sband->n_channels;
837
838                 if (max_bitrates < sband->n_bitrates)
839                         max_bitrates = sband->n_bitrates;
840                 supp_ht = supp_ht || sband->ht_cap.ht_supported;
841                 supp_vht = supp_vht || sband->vht_cap.vht_supported;
842
843                 if (sband->ht_cap.ht_supported)
844                         local->rx_chains =
845                                 max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs),
846                                     local->rx_chains);
847
848                 /* TODO: consider VHT for RX chains, hopefully it's the same */
849         }
850
851         /* if low-level driver supports AP, we also support VLAN */
852         if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
853                 hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
854                 hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
855         }
856
857         /* mac80211 always supports monitor */
858         hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
859         hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
860
861         /* mac80211 doesn't support more than one IBSS interface right now */
862         for (i = 0; i < hw->wiphy->n_iface_combinations; i++) {
863                 const struct ieee80211_iface_combination *c;
864                 int j;
865
866                 c = &hw->wiphy->iface_combinations[i];
867
868                 for (j = 0; j < c->n_limits; j++)
869                         if ((c->limits[j].types & BIT(NL80211_IFTYPE_ADHOC)) &&
870                             c->limits[j].max > 1)
871                                 return -EINVAL;
872         }
873
874         local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) +
875                                       sizeof(void *) * channels, GFP_KERNEL);
876         if (!local->int_scan_req)
877                 return -ENOMEM;
878
879         for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
880                 if (!local->hw.wiphy->bands[band])
881                         continue;
882                 local->int_scan_req->rates[band] = (u32) -1;
883         }
884
885 #ifndef CONFIG_MAC80211_MESH
886         /* mesh depends on Kconfig, but drivers should set it if they want */
887         local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT);
888 #endif
889
890         /* if the underlying driver supports mesh, mac80211 will (at least)
891          * provide routing of mesh authentication frames to userspace */
892         if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
893                 local->hw.wiphy->flags |= WIPHY_FLAG_MESH_AUTH;
894
895         /* mac80211 supports control port protocol changing */
896         local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL;
897
898         if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
899                 local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
900         else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
901                 local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
902
903         WARN((local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)
904              && (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK),
905              "U-APSD not supported with HW_PS_NULLFUNC_STACK\n");
906
907         /*
908          * Calculate scan IE length -- we need this to alloc
909          * memory and to subtract from the driver limit. It
910          * includes the DS Params, (extended) supported rates, and HT
911          * information -- SSID is the driver's responsibility.
912          */
913         local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ +
914                 3 /* DS Params */;
915         if (supp_ht)
916                 local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
917
918         if (supp_vht)
919                 local->scan_ies_len +=
920                         2 + sizeof(struct ieee80211_vht_cap);
921
922         if (!local->ops->hw_scan) {
923                 /* For hw_scan, driver needs to set these up. */
924                 local->hw.wiphy->max_scan_ssids = 4;
925                 local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
926         }
927
928         /*
929          * If the driver supports any scan IEs, then assume the
930          * limit includes the IEs mac80211 will add, otherwise
931          * leave it at zero and let the driver sort it out; we
932          * still pass our IEs to the driver but userspace will
933          * not be allowed to in that case.
934          */
935         if (local->hw.wiphy->max_scan_ie_len)
936                 local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
937
938         WARN_ON(!ieee80211_cs_list_valid(local->hw.cipher_schemes,
939                                          local->hw.n_cipher_schemes));
940
941         result = ieee80211_init_cipher_suites(local);
942         if (result < 0)
943                 goto fail_wiphy_register;
944
945         if (!local->ops->remain_on_channel)
946                 local->hw.wiphy->max_remain_on_channel_duration = 5000;
947
948         /* mac80211 based drivers don't support internal TDLS setup */
949         if (local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS)
950                 local->hw.wiphy->flags |= WIPHY_FLAG_TDLS_EXTERNAL_SETUP;
951
952         result = wiphy_register(local->hw.wiphy);
953         if (result < 0)
954                 goto fail_wiphy_register;
955
956         /*
957          * We use the number of queues for feature tests (QoS, HT) internally
958          * so restrict them appropriately.
959          */
960         if (hw->queues > IEEE80211_MAX_QUEUES)
961                 hw->queues = IEEE80211_MAX_QUEUES;
962
963         local->workqueue =
964                 alloc_ordered_workqueue("%s", 0, wiphy_name(local->hw.wiphy));
965         if (!local->workqueue) {
966                 result = -ENOMEM;
967                 goto fail_workqueue;
968         }
969
970         /*
971          * The hardware needs headroom for sending the frame,
972          * and we need some headroom for passing the frame to monitor
973          * interfaces, but never both at the same time.
974          */
975         local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
976                                    IEEE80211_TX_STATUS_HEADROOM);
977
978         debugfs_hw_add(local);
979
980         /*
981          * if the driver doesn't specify a max listen interval we
982          * use 5 which should be a safe default
983          */
984         if (local->hw.max_listen_interval == 0)
985                 local->hw.max_listen_interval = 5;
986
987         local->hw.conf.listen_interval = local->hw.max_listen_interval;
988
989         local->dynamic_ps_forced_timeout = -1;
990
991         result = ieee80211_wep_init(local);
992         if (result < 0)
993                 wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
994                             result);
995
996         local->hw.conf.flags = IEEE80211_CONF_IDLE;
997
998         ieee80211_led_init(local);
999
1000         rtnl_lock();
1001
1002         result = ieee80211_init_rate_ctrl_alg(local,
1003                                               hw->rate_control_algorithm);
1004         if (result < 0) {
1005                 wiphy_debug(local->hw.wiphy,
1006                             "Failed to initialize rate control algorithm\n");
1007                 goto fail_rate;
1008         }
1009
1010         /* add one default STA interface if supported */
1011         if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) {
1012                 result = ieee80211_if_add(local, "wlan%d", NULL,
1013                                           NL80211_IFTYPE_STATION, NULL);
1014                 if (result)
1015                         wiphy_warn(local->hw.wiphy,
1016                                    "Failed to add default virtual iface\n");
1017         }
1018
1019         rtnl_unlock();
1020
1021         local->network_latency_notifier.notifier_call =
1022                 ieee80211_max_network_latency;
1023         result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
1024                                      &local->network_latency_notifier);
1025         if (result) {
1026                 rtnl_lock();
1027                 goto fail_pm_qos;
1028         }
1029
1030 #ifdef CONFIG_INET
1031         local->ifa_notifier.notifier_call = ieee80211_ifa_changed;
1032         result = register_inetaddr_notifier(&local->ifa_notifier);
1033         if (result)
1034                 goto fail_ifa;
1035 #endif
1036
1037 #if IS_ENABLED(CONFIG_IPV6)
1038         local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
1039         result = register_inet6addr_notifier(&local->ifa6_notifier);
1040         if (result)
1041                 goto fail_ifa6;
1042 #endif
1043
1044         return 0;
1045
1046 #if IS_ENABLED(CONFIG_IPV6)
1047  fail_ifa6:
1048 #ifdef CONFIG_INET
1049         unregister_inetaddr_notifier(&local->ifa_notifier);
1050 #endif
1051 #endif
1052 #if defined(CONFIG_INET) || defined(CONFIG_IPV6)
1053  fail_ifa:
1054         pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
1055                                &local->network_latency_notifier);
1056         rtnl_lock();
1057 #endif
1058  fail_pm_qos:
1059         ieee80211_led_exit(local);
1060         ieee80211_remove_interfaces(local);
1061  fail_rate:
1062         rtnl_unlock();
1063         ieee80211_wep_free(local);
1064         sta_info_stop(local);
1065         destroy_workqueue(local->workqueue);
1066  fail_workqueue:
1067         wiphy_unregister(local->hw.wiphy);
1068  fail_wiphy_register:
1069         if (local->wiphy_ciphers_allocated)
1070                 kfree(local->hw.wiphy->cipher_suites);
1071         kfree(local->int_scan_req);
1072         return result;
1073 }
1074 EXPORT_SYMBOL(ieee80211_register_hw);
1075
1076 void ieee80211_unregister_hw(struct ieee80211_hw *hw)
1077 {
1078         struct ieee80211_local *local = hw_to_local(hw);
1079
1080         tasklet_kill(&local->tx_pending_tasklet);
1081         tasklet_kill(&local->tasklet);
1082
1083         pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
1084                                &local->network_latency_notifier);
1085 #ifdef CONFIG_INET
1086         unregister_inetaddr_notifier(&local->ifa_notifier);
1087 #endif
1088 #if IS_ENABLED(CONFIG_IPV6)
1089         unregister_inet6addr_notifier(&local->ifa6_notifier);
1090 #endif
1091
1092         rtnl_lock();
1093
1094         /*
1095          * At this point, interface list manipulations are fine
1096          * because the driver cannot be handing us frames any
1097          * more and the tasklet is killed.
1098          */
1099         ieee80211_remove_interfaces(local);
1100
1101         rtnl_unlock();
1102
1103         cancel_work_sync(&local->restart_work);
1104         cancel_work_sync(&local->reconfig_filter);
1105         flush_work(&local->sched_scan_stopped_work);
1106
1107         ieee80211_clear_tx_pending(local);
1108         rate_control_deinitialize(local);
1109
1110         if (skb_queue_len(&local->skb_queue) ||
1111             skb_queue_len(&local->skb_queue_unreliable))
1112                 wiphy_warn(local->hw.wiphy, "skb_queue not empty\n");
1113         skb_queue_purge(&local->skb_queue);
1114         skb_queue_purge(&local->skb_queue_unreliable);
1115
1116         destroy_workqueue(local->workqueue);
1117         wiphy_unregister(local->hw.wiphy);
1118         sta_info_stop(local);
1119         ieee80211_wep_free(local);
1120         ieee80211_led_exit(local);
1121         kfree(local->int_scan_req);
1122 }
1123 EXPORT_SYMBOL(ieee80211_unregister_hw);
1124
1125 static int ieee80211_free_ack_frame(int id, void *p, void *data)
1126 {
1127         WARN_ONCE(1, "Have pending ack frames!\n");
1128         kfree_skb(p);
1129         return 0;
1130 }
1131
1132 void ieee80211_free_hw(struct ieee80211_hw *hw)
1133 {
1134         struct ieee80211_local *local = hw_to_local(hw);
1135
1136         mutex_destroy(&local->iflist_mtx);
1137         mutex_destroy(&local->mtx);
1138
1139         if (local->wiphy_ciphers_allocated)
1140                 kfree(local->hw.wiphy->cipher_suites);
1141
1142         idr_for_each(&local->ack_status_frames,
1143                      ieee80211_free_ack_frame, NULL);
1144         idr_destroy(&local->ack_status_frames);
1145
1146         kfree(rcu_access_pointer(local->tx_latency));
1147
1148         wiphy_free(local->hw.wiphy);
1149 }
1150 EXPORT_SYMBOL(ieee80211_free_hw);
1151
1152 static int __init ieee80211_init(void)
1153 {
1154         struct sk_buff *skb;
1155         int ret;
1156
1157         BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb));
1158         BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) +
1159                      IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
1160
1161         ret = rc80211_minstrel_init();
1162         if (ret)
1163                 return ret;
1164
1165         ret = rc80211_minstrel_ht_init();
1166         if (ret)
1167                 goto err_minstrel;
1168
1169         ret = rc80211_pid_init();
1170         if (ret)
1171                 goto err_pid;
1172
1173         ret = ieee80211_iface_init();
1174         if (ret)
1175                 goto err_netdev;
1176
1177         return 0;
1178  err_netdev:
1179         rc80211_pid_exit();
1180  err_pid:
1181         rc80211_minstrel_ht_exit();
1182  err_minstrel:
1183         rc80211_minstrel_exit();
1184
1185         return ret;
1186 }
1187
1188 static void __exit ieee80211_exit(void)
1189 {
1190         rc80211_pid_exit();
1191         rc80211_minstrel_ht_exit();
1192         rc80211_minstrel_exit();
1193
1194         ieee80211s_stop();
1195
1196         ieee80211_iface_exit();
1197
1198         rcu_barrier();
1199 }
1200
1201
1202 subsys_initcall(ieee80211_init);
1203 module_exit(ieee80211_exit);
1204
1205 MODULE_DESCRIPTION("IEEE 802.11 subsystem");
1206 MODULE_LICENSE("GPL");