Merge tag 'dmaengine-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul...
[platform/kernel/linux-starfive.git] / net / hsr / hsr_slave.c
1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright 2011-2014 Autronica Fire and Security AS
3  *
4  * Author(s):
5  *      2011-2014 Arvid Brodin, arvid.brodin@alten.se
6  *
7  * Frame handler other utility functions for HSR and PRP.
8  */
9
10 #include "hsr_slave.h"
11 #include <linux/etherdevice.h>
12 #include <linux/if_arp.h>
13 #include <linux/if_vlan.h>
14 #include "hsr_main.h"
15 #include "hsr_device.h"
16 #include "hsr_forward.h"
17 #include "hsr_framereg.h"
18
19 bool hsr_invalid_dan_ingress_frame(__be16 protocol)
20 {
21         return (protocol != htons(ETH_P_PRP) && protocol != htons(ETH_P_HSR));
22 }
23
24 static rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb)
25 {
26         struct sk_buff *skb = *pskb;
27         struct hsr_port *port;
28         struct hsr_priv *hsr;
29         __be16 protocol;
30
31         /* Packets from dev_loopback_xmit() do not have L2 header, bail out */
32         if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
33                 return RX_HANDLER_PASS;
34
35         if (!skb_mac_header_was_set(skb)) {
36                 WARN_ONCE(1, "%s: skb invalid", __func__);
37                 return RX_HANDLER_PASS;
38         }
39
40         port = hsr_port_get_rcu(skb->dev);
41         if (!port)
42                 goto finish_pass;
43         hsr = port->hsr;
44
45         if (hsr_addr_is_self(port->hsr, eth_hdr(skb)->h_source)) {
46                 /* Directly kill frames sent by ourselves */
47                 kfree_skb(skb);
48                 goto finish_consume;
49         }
50
51         /* For HSR, only tagged frames are expected (unless the device offloads
52          * HSR tag removal), but for PRP there could be non tagged frames as
53          * well from Single attached nodes (SANs).
54          */
55         protocol = eth_hdr(skb)->h_proto;
56
57         if (!(port->dev->features & NETIF_F_HW_HSR_TAG_RM) &&
58             hsr->proto_ops->invalid_dan_ingress_frame &&
59             hsr->proto_ops->invalid_dan_ingress_frame(protocol))
60                 goto finish_pass;
61
62         skb_push(skb, ETH_HLEN);
63         skb_reset_mac_header(skb);
64         if ((!hsr->prot_version && protocol == htons(ETH_P_PRP)) ||
65             protocol == htons(ETH_P_HSR))
66                 skb_set_network_header(skb, ETH_HLEN + HSR_HLEN);
67         skb_reset_mac_len(skb);
68
69         hsr_forward_skb(skb, port);
70
71 finish_consume:
72         return RX_HANDLER_CONSUMED;
73
74 finish_pass:
75         return RX_HANDLER_PASS;
76 }
77
78 bool hsr_port_exists(const struct net_device *dev)
79 {
80         return rcu_access_pointer(dev->rx_handler) == hsr_handle_frame;
81 }
82
83 static int hsr_check_dev_ok(struct net_device *dev,
84                             struct netlink_ext_ack *extack)
85 {
86         /* Don't allow HSR on non-ethernet like devices */
87         if ((dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
88             dev->addr_len != ETH_ALEN) {
89                 NL_SET_ERR_MSG_MOD(extack, "Cannot use loopback or non-ethernet device as HSR slave.");
90                 return -EINVAL;
91         }
92
93         /* Don't allow enslaving hsr devices */
94         if (is_hsr_master(dev)) {
95                 NL_SET_ERR_MSG_MOD(extack,
96                                    "Cannot create trees of HSR devices.");
97                 return -EINVAL;
98         }
99
100         if (hsr_port_exists(dev)) {
101                 NL_SET_ERR_MSG_MOD(extack,
102                                    "This device is already a HSR slave.");
103                 return -EINVAL;
104         }
105
106         if (is_vlan_dev(dev)) {
107                 NL_SET_ERR_MSG_MOD(extack, "HSR on top of VLAN is not yet supported in this driver.");
108                 return -EINVAL;
109         }
110
111         if (dev->priv_flags & IFF_DONT_BRIDGE) {
112                 NL_SET_ERR_MSG_MOD(extack,
113                                    "This device does not support bridging.");
114                 return -EOPNOTSUPP;
115         }
116
117         /* HSR over bonded devices has not been tested, but I'm not sure it
118          * won't work...
119          */
120
121         return 0;
122 }
123
124 /* Setup device to be added to the HSR bridge. */
125 static int hsr_portdev_setup(struct hsr_priv *hsr, struct net_device *dev,
126                              struct hsr_port *port,
127                              struct netlink_ext_ack *extack)
128
129 {
130         struct net_device *hsr_dev;
131         struct hsr_port *master;
132         int res;
133
134         /* Don't use promiscuous mode for offload since L2 frame forward
135          * happens at the offloaded hardware.
136          */
137         if (!port->hsr->fwd_offloaded) {
138                 res = dev_set_promiscuity(dev, 1);
139                 if (res)
140                         return res;
141         }
142
143         master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
144         hsr_dev = master->dev;
145
146         res = netdev_upper_dev_link(dev, hsr_dev, extack);
147         if (res)
148                 goto fail_upper_dev_link;
149
150         res = netdev_rx_handler_register(dev, hsr_handle_frame, port);
151         if (res)
152                 goto fail_rx_handler;
153         dev_disable_lro(dev);
154
155         return 0;
156
157 fail_rx_handler:
158         netdev_upper_dev_unlink(dev, hsr_dev);
159 fail_upper_dev_link:
160         if (!port->hsr->fwd_offloaded)
161                 dev_set_promiscuity(dev, -1);
162
163         return res;
164 }
165
166 int hsr_add_port(struct hsr_priv *hsr, struct net_device *dev,
167                  enum hsr_port_type type, struct netlink_ext_ack *extack)
168 {
169         struct hsr_port *port, *master;
170         int res;
171
172         if (type != HSR_PT_MASTER) {
173                 res = hsr_check_dev_ok(dev, extack);
174                 if (res)
175                         return res;
176         }
177
178         port = hsr_port_get_hsr(hsr, type);
179         if (port)
180                 return -EBUSY;  /* This port already exists */
181
182         port = kzalloc(sizeof(*port), GFP_KERNEL);
183         if (!port)
184                 return -ENOMEM;
185
186         port->hsr = hsr;
187         port->dev = dev;
188         port->type = type;
189
190         if (type != HSR_PT_MASTER) {
191                 res = hsr_portdev_setup(hsr, dev, port, extack);
192                 if (res)
193                         goto fail_dev_setup;
194         }
195
196         list_add_tail_rcu(&port->port_list, &hsr->ports);
197         synchronize_rcu();
198
199         master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
200         netdev_update_features(master->dev);
201         dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
202
203         return 0;
204
205 fail_dev_setup:
206         kfree(port);
207         return res;
208 }
209
210 void hsr_del_port(struct hsr_port *port)
211 {
212         struct hsr_priv *hsr;
213         struct hsr_port *master;
214
215         hsr = port->hsr;
216         master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
217         list_del_rcu(&port->port_list);
218
219         if (port != master) {
220                 netdev_update_features(master->dev);
221                 dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
222                 netdev_rx_handler_unregister(port->dev);
223                 dev_set_promiscuity(port->dev, -1);
224                 netdev_upper_dev_unlink(port->dev, master->dev);
225         }
226
227         synchronize_rcu();
228
229         kfree(port);
230 }