net/eth-uclass.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * (C) Copyright 2001-2015
   4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   5  * Joe Hershberger, National Instruments
   6  */
   7
   8 #include <common.h>
   9 #include <dm.h>
  10 #include <environment.h>
  11 #include <net.h>
  12 #include <dm/device-internal.h>
  13 #include <dm/uclass-internal.h>
  14 #include "eth_internal.h"
  15
  16 DECLARE_GLOBAL_DATA_PTR;
  17
  18 /**
  19  * struct eth_device_priv - private structure for each Ethernet device
  20  *
  21  * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t)
  22  */
  23 struct eth_device_priv {
  24         enum eth_state_t state;
  25 };
  26
  27 /**
  28  * struct eth_uclass_priv - The structure attached to the uclass itself
  29  *
  30  * @current: The Ethernet device that the network functions are using
  31  */
  32 struct eth_uclass_priv {
  33         struct udevice *current;
  34 };
  35
  36 /* eth_errno - This stores the most recent failure code from DM functions */
  37 static int eth_errno;
  38
  39 static struct eth_uclass_priv *eth_get_uclass_priv(void)
  40 {
  41         struct uclass *uc;
  42
  43         uclass_get(UCLASS_ETH, &uc);
  44         assert(uc);
  45         return uc->priv;
  46 }
  47
  48 void eth_set_current_to_next(void)
  49 {
  50         struct eth_uclass_priv *uc_priv;
  51
  52         uc_priv = eth_get_uclass_priv();
  53         if (uc_priv->current)
  54                 uclass_next_device(&uc_priv->current);
  55         if (!uc_priv->current)
  56                 uclass_first_device(UCLASS_ETH, &uc_priv->current);
  57 }
  58
  59 /*
  60  * Typically this will simply return the active device.
  61  * In the case where the most recent active device was unset, this will attempt
  62  * to return the first device. If that device doesn't exist or fails to probe,
  63  * this function will return NULL.
  64  */
  65 struct udevice *eth_get_dev(void)
  66 {
  67         struct eth_uclass_priv *uc_priv;
  68
  69         uc_priv = eth_get_uclass_priv();
  70         if (!uc_priv->current)
  71                 eth_errno = uclass_first_device(UCLASS_ETH,
  72                                     &uc_priv->current);
  73         return uc_priv->current;
  74 }
  75
  76 /*
  77  * Typically this will just store a device pointer.
  78  * In case it was not probed, we will attempt to do so.
  79  * dev may be NULL to unset the active device.
  80  */
  81 void eth_set_dev(struct udevice *dev)
  82 {
  83         if (dev && !device_active(dev)) {
  84                 eth_errno = device_probe(dev);
  85                 if (eth_errno)
  86                         dev = NULL;
  87         }
  88
  89         eth_get_uclass_priv()->current = dev;
  90 }
  91
  92 /*
  93  * Find the udevice that either has the name passed in as devname or has an
  94  * alias named devname.
  95  */
  96 struct udevice *eth_get_dev_by_name(const char *devname)
  97 {
  98         int seq = -1;
  99         char *endp = NULL;
 100         const char *startp = NULL;
 101         struct udevice *it;
 102         struct uclass *uc;
 103         int len = strlen("eth");
 104
 105         /* Must be longer than 3 to be an alias */
 106         if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
 107                 startp = devname + len;
 108                 seq = simple_strtoul(startp, &endp, 10);
 109         }
 110
 111         uclass_get(UCLASS_ETH, &uc);
 112         uclass_foreach_dev(it, uc) {
 113                 /*
 114                  * We need the seq to be valid, so try to probe it.
 115                  * If the probe fails, the seq will not match since it will be
 116                  * -1 instead of what we are looking for.
 117                  * We don't care about errors from probe here. Either they won't
 118                  * match an alias or it will match a literal name and we'll pick
 119                  * up the error when we try to probe again in eth_set_dev().
 120                  */
 121                 if (device_probe(it))
 122                         continue;
 123                 /* Check for the name or the sequence number to match */
 124                 if (strcmp(it->name, devname) == 0 ||
 125                     (endp > startp && it->seq == seq))
 126                         return it;
 127         }
 128
 129         return NULL;
 130 }
 131
 132 unsigned char *eth_get_ethaddr(void)
 133 {
 134         struct eth_pdata *pdata;
 135
 136         if (eth_get_dev()) {
 137                 pdata = eth_get_dev()->platdata;
 138                 return pdata->enetaddr;
 139         }
 140
 141         return NULL;
 142 }
 143
 144 /* Set active state without calling start on the driver */
 145 int eth_init_state_only(void)
 146 {
 147         struct udevice *current;
 148         struct eth_device_priv *priv;
 149
 150         current = eth_get_dev();
 151         if (!current || !device_active(current))
 152                 return -EINVAL;
 153
 154         priv = current->uclass_priv;
 155         priv->state = ETH_STATE_ACTIVE;
 156
 157         return 0;
 158 }
 159
 160 /* Set passive state without calling stop on the driver */
 161 void eth_halt_state_only(void)
 162 {
 163         struct udevice *current;
 164         struct eth_device_priv *priv;
 165
 166         current = eth_get_dev();
 167         if (!current || !device_active(current))
 168                 return;
 169
 170         priv = current->uclass_priv;
 171         priv->state = ETH_STATE_PASSIVE;
 172 }
 173
 174 int eth_get_dev_index(void)
 175 {
 176         if (eth_get_dev())
 177                 return eth_get_dev()->seq;
 178         return -1;
 179 }
 180
 181 static int eth_write_hwaddr(struct udevice *dev)
 182 {
 183         struct eth_pdata *pdata;
 184         int ret = 0;
 185
 186         if (!dev || !device_active(dev))
 187                 return -EINVAL;
 188
 189         /* seq is valid since the device is active */
 190         if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {
 191                 pdata = dev->platdata;
 192                 if (!is_valid_ethaddr(pdata->enetaddr)) {
 193                         printf("\nError: %s address %pM illegal value\n",
 194                                dev->name, pdata->enetaddr);
 195                         return -EINVAL;
 196                 }
 197
 198                 /*
 199                  * Drivers are allowed to decide not to implement this at
 200                  * run-time. E.g. Some devices may use it and some may not.
 201                  */
 202                 ret = eth_get_ops(dev)->write_hwaddr(dev);
 203                 if (ret == -ENOSYS)
 204                         ret = 0;
 205                 if (ret)
 206                         printf("\nWarning: %s failed to set MAC address\n",
 207                                dev->name);
 208         }
 209
 210         return ret;
 211 }
 212
 213 static int on_ethaddr(const char *name, const char *value, enum env_op op,
 214         int flags)
 215 {
 216         int index;
 217         int retval;
 218         struct udevice *dev;
 219
 220         /* look for an index after "eth" */
 221         index = simple_strtoul(name + 3, NULL, 10);
 222
 223         retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev);
 224         if (!retval) {
 225                 struct eth_pdata *pdata = dev->platdata;
 226                 switch (op) {
 227                 case env_op_create:
 228                 case env_op_overwrite:
 229                         eth_parse_enetaddr(value, pdata->enetaddr);
 230                         eth_write_hwaddr(dev);
 231                         break;
 232                 case env_op_delete:
 233                         memset(pdata->enetaddr, 0, ARP_HLEN);
 234                 }
 235         }
 236
 237         return 0;
 238 }
 239 U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr);
 240
 241 int eth_init(void)
 242 {
 243         char *ethact = env_get("ethact");
 244         char *ethrotate = env_get("ethrotate");
 245         struct udevice *current = NULL;
 246         struct udevice *old_current;
 247         int ret = -ENODEV;
 248
 249         /*
 250          * When 'ethrotate' variable is set to 'no' and 'ethact' variable
 251          * is already set to an ethernet device, we should stick to 'ethact'.
 252          */
 253         if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
 254                 if (ethact) {
 255                         current = eth_get_dev_by_name(ethact);
 256                         if (!current)
 257                                 return -EINVAL;
 258                 }
 259         }
 260
 261         if (!current) {
 262                 current = eth_get_dev();
 263                 if (!current) {
 264                         printf("No ethernet found.\n");
 265                         return -ENODEV;
 266                 }
 267         }
 268
 269         old_current = current;
 270         do {
 271                 if (current) {
 272                         debug("Trying %s\n", current->name);
 273
 274                         if (device_active(current)) {
 275                                 ret = eth_get_ops(current)->start(current);
 276                                 if (ret >= 0) {
 277                                         struct eth_device_priv *priv =
 278                                                 current->uclass_priv;
 279
 280                                         priv->state = ETH_STATE_ACTIVE;
 281                                         return 0;
 282                                 }
 283                         } else {
 284                                 ret = eth_errno;
 285                         }
 286
 287                         debug("FAIL\n");
 288                 } else {
 289                         debug("PROBE FAIL\n");
 290                 }
 291
 292                 /*
 293                  * If ethrotate is enabled, this will change "current",
 294                  * otherwise we will drop out of this while loop immediately
 295                  */
 296                 eth_try_another(0);
 297                 /* This will ensure the new "current" attempted to probe */
 298                 current = eth_get_dev();
 299         } while (old_current != current);
 300
 301         return ret;
 302 }
 303
 304 void eth_halt(void)
 305 {
 306         struct udevice *current;
 307         struct eth_device_priv *priv;
 308
 309         current = eth_get_dev();
 310         if (!current || !eth_is_active(current))
 311                 return;
 312
 313         eth_get_ops(current)->stop(current);
 314         priv = current->uclass_priv;
 315         if (priv)
 316                 priv->state = ETH_STATE_PASSIVE;
 317 }
 318
 319 int eth_is_active(struct udevice *dev)
 320 {
 321         struct eth_device_priv *priv;
 322
 323         if (!dev || !device_active(dev))
 324                 return 0;
 325
 326         priv = dev_get_uclass_priv(dev);
 327         return priv->state == ETH_STATE_ACTIVE;
 328 }
 329
 330 int eth_send(void *packet, int length)
 331 {
 332         struct udevice *current;
 333         int ret;
 334
 335         current = eth_get_dev();
 336         if (!current)
 337                 return -ENODEV;
 338
 339         if (!eth_is_active(current))
 340                 return -EINVAL;
 341
 342         ret = eth_get_ops(current)->send(current, packet, length);
 343         if (ret < 0) {
 344                 /* We cannot completely return the error at present */
 345                 debug("%s: send() returned error %d\n", __func__, ret);
 346         }
 347         return ret;
 348 }
 349
 350 int eth_rx(void)
 351 {
 352         struct udevice *current;
 353         uchar *packet;
 354         int flags;
 355         int ret;
 356         int i;
 357
 358         current = eth_get_dev();
 359         if (!current)
 360                 return -ENODEV;
 361
 362         if (!eth_is_active(current))
 363                 return -EINVAL;
 364
 365         /* Process up to 32 packets at one time */
 366         flags = ETH_RECV_CHECK_DEVICE;
 367         for (i = 0; i < 32; i++) {
 368                 ret = eth_get_ops(current)->recv(current, flags, &packet);
 369                 flags = 0;
 370                 if (ret > 0)
 371                         net_process_received_packet(packet, ret);
 372                 if (ret >= 0 && eth_get_ops(current)->free_pkt)
 373                         eth_get_ops(current)->free_pkt(current, packet, ret);
 374                 if (ret <= 0)
 375                         break;
 376         }
 377         if (ret == -EAGAIN)
 378                 ret = 0;
 379         if (ret < 0) {
 380                 /* We cannot completely return the error at present */
 381                 debug("%s: recv() returned error %d\n", __func__, ret);
 382         }
 383         return ret;
 384 }
 385
 386 int eth_initialize(void)
 387 {
 388         int num_devices = 0;
 389         struct udevice *dev;
 390
 391         eth_common_init();
 392
 393         /*
 394          * Devices need to write the hwaddr even if not started so that Linux
 395          * will have access to the hwaddr that u-boot stored for the device.
 396          * This is accomplished by attempting to probe each device and calling
 397          * their write_hwaddr() operation.
 398          */
 399         uclass_first_device_check(UCLASS_ETH, &dev);
 400         if (!dev) {
 401                 printf("No ethernet found.\n");
 402                 bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
 403         } else {
 404                 char *ethprime = env_get("ethprime");
 405                 struct udevice *prime_dev = NULL;
 406
 407                 if (ethprime)
 408                         prime_dev = eth_get_dev_by_name(ethprime);
 409                 if (prime_dev) {
 410                         eth_set_dev(prime_dev);
 411                         eth_current_changed();
 412                 } else {
 413                         eth_set_dev(NULL);
 414                 }
 415
 416                 bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
 417                 do {
 418                         if (num_devices)
 419                                 printf(", ");
 420
 421                         printf("eth%d: %s", dev->seq, dev->name);
 422
 423                         if (ethprime && dev == prime_dev)
 424                                 printf(" [PRIME]");
 425
 426                         eth_write_hwaddr(dev);
 427
 428                         uclass_next_device_check(&dev);
 429                         num_devices++;
 430                 } while (dev);
 431
 432                 putc('\n');
 433         }
 434
 435         return num_devices;
 436 }
 437
 438 static int eth_post_bind(struct udevice *dev)
 439 {
 440         if (strchr(dev->name, ' ')) {
 441                 printf("\nError: eth device name \"%s\" has a space!\n",
 442                        dev->name);
 443                 return -EINVAL;
 444         }
 445
 446         return 0;
 447 }
 448
 449 static int eth_pre_unbind(struct udevice *dev)
 450 {
 451         /* Don't hang onto a pointer that is going away */
 452         if (dev == eth_get_uclass_priv()->current)
 453                 eth_set_dev(NULL);
 454
 455         return 0;
 456 }
 457
 458 static int eth_post_probe(struct udevice *dev)
 459 {
 460         struct eth_device_priv *priv = dev->uclass_priv;
 461         struct eth_pdata *pdata = dev->platdata;
 462         unsigned char env_enetaddr[ARP_HLEN];
 463
 464 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
 465         struct eth_ops *ops = eth_get_ops(dev);
 466         static int reloc_done;
 467
 468         if (!reloc_done) {
 469                 if (ops->start)
 470                         ops->start += gd->reloc_off;
 471                 if (ops->send)
 472                         ops->send += gd->reloc_off;
 473                 if (ops->recv)
 474                         ops->recv += gd->reloc_off;
 475                 if (ops->free_pkt)
 476                         ops->free_pkt += gd->reloc_off;
 477                 if (ops->stop)
 478                         ops->stop += gd->reloc_off;
 479 #ifdef CONFIG_MCAST_TFTP
 480                 if (ops->mcast)
 481                         ops->mcast += gd->reloc_off;
 482 #endif
 483                 if (ops->write_hwaddr)
 484                         ops->write_hwaddr += gd->reloc_off;
 485                 if (ops->read_rom_hwaddr)
 486                         ops->read_rom_hwaddr += gd->reloc_off;
 487
 488                 reloc_done++;
 489         }
 490 #endif
 491
 492         priv->state = ETH_STATE_INIT;
 493
 494         /* Check if the device has a MAC address in ROM */
 495         if (eth_get_ops(dev)->read_rom_hwaddr)
 496                 eth_get_ops(dev)->read_rom_hwaddr(dev);
 497
 498         eth_env_get_enetaddr_by_index("eth", dev->seq, env_enetaddr);
 499         if (!is_zero_ethaddr(env_enetaddr)) {
 500                 if (!is_zero_ethaddr(pdata->enetaddr) &&
 501                     memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) {
 502                         printf("\nWarning: %s MAC addresses don't match:\n",
 503                                dev->name);
 504                         printf("Address in ROM is          %pM\n",
 505                                pdata->enetaddr);
 506                         printf("Address in environment is  %pM\n",
 507                                env_enetaddr);
 508                 }
 509
 510                 /* Override the ROM MAC address */
 511                 memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN);
 512         } else if (is_valid_ethaddr(pdata->enetaddr)) {
 513                 eth_env_set_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);
 514                 printf("\nWarning: %s using MAC address from ROM\n",
 515                        dev->name);
 516         } else if (is_zero_ethaddr(pdata->enetaddr) ||
 517                    !is_valid_ethaddr(pdata->enetaddr)) {
 518 #ifdef CONFIG_NET_RANDOM_ETHADDR
 519                 net_random_ethaddr(pdata->enetaddr);
 520                 printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
 521                        dev->name, dev->seq, pdata->enetaddr);
 522 #else
 523                 printf("\nError: %s address not set.\n",
 524                        dev->name);
 525                 return -EINVAL;
 526 #endif
 527         }
 528
 529         return 0;
 530 }
 531
 532 static int eth_pre_remove(struct udevice *dev)
 533 {
 534         struct eth_pdata *pdata = dev->platdata;
 535
 536         eth_get_ops(dev)->stop(dev);
 537
 538         /* clear the MAC address */
 539         memset(pdata->enetaddr, 0, ARP_HLEN);
 540
 541         return 0;
 542 }
 543
 544 UCLASS_DRIVER(eth) = {
 545         .name           = "eth",
 546         .id             = UCLASS_ETH,
 547         .post_bind      = eth_post_bind,
 548         .pre_unbind     = eth_pre_unbind,
 549         .post_probe     = eth_post_probe,
 550         .pre_remove     = eth_pre_remove,
 551         .priv_auto_alloc_size = sizeof(struct eth_uclass_priv),
 552         .per_device_auto_alloc_size = sizeof(struct eth_device_priv),
 553         .flags          = DM_UC_FLAG_SEQ_ALIAS,
 554 };