2 * INET An implementation of the TCP/IP protocol suite for the LINUX
3 * operating system. INET is implemented using the BSD Socket
4 * interface as the means of communication with the user level.
6 * HIPPI-type device handling.
8 * Version: @(#)hippi.c 1.0.0 05/29/97
11 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
12 * Mark Evans, <evansmp@uhura.aston.ac.uk>
13 * Florian La Roche, <rzsfl@rz.uni-sb.de>
14 * Alan Cox, <gw4pts@gw4pts.ampr.org>
15 * Jes Sorensen, <Jes.Sorensen@cern.ch>
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License
19 * as published by the Free Software Foundation; either version
20 * 2 of the License, or (at your option) any later version.
23 #include <linux/module.h>
24 #include <linux/types.h>
25 #include <linux/kernel.h>
26 #include <linux/string.h>
28 #include <linux/socket.h>
30 #include <linux/inet.h>
31 #include <linux/netdevice.h>
32 #include <linux/hippidevice.h>
33 #include <linux/skbuff.h>
34 #include <linux/errno.h>
37 #include <asm/uaccess.h>
40 * Create the HIPPI MAC header for an arbitrary protocol layer
42 * saddr=NULL means use device source address
43 * daddr=NULL means leave destination address (eg unresolved arp)
46 static int hippi_header(struct sk_buff *skb, struct net_device *dev,
48 const void *daddr, const void *saddr, unsigned int len)
50 struct hippi_hdr *hip = (struct hippi_hdr *)skb_push(skb, HIPPI_HLEN);
51 struct hippi_cb *hcb = (struct hippi_cb *) skb->cb;
54 len = skb->len - HIPPI_HLEN;
55 printk("hippi_header(): length not supplied\n");
59 * Due to the stupidity of the little endian byte-order we
60 * have to set the fp field this way.
62 hip->fp.fixed = htonl(0x04800018);
63 hip->fp.d2_size = htonl(len + 8);
65 hip->le.double_wide = 0; /* only HIPPI 800 for the time being */
66 hip->le.message_type = 0; /* Data PDU */
68 hip->le.dest_addr_type = 2; /* 12 bit SC address */
69 hip->le.src_addr_type = 2; /* 12 bit SC address */
71 memcpy(hip->le.src_switch_addr, dev->dev_addr + 3, 3);
72 memset(&hip->le.reserved, 0, 16);
74 hip->snap.dsap = HIPPI_EXTENDED_SAP;
75 hip->snap.ssap = HIPPI_EXTENDED_SAP;
76 hip->snap.ctrl = HIPPI_UI_CMD;
77 hip->snap.oui[0] = 0x00;
78 hip->snap.oui[1] = 0x00;
79 hip->snap.oui[2] = 0x00;
80 hip->snap.ethertype = htons(type);
84 memcpy(hip->le.dest_switch_addr, daddr + 3, 3);
85 memcpy(&hcb->ifield, daddr + 2, 4);
89 return -((int)HIPPI_HLEN);
94 * Rebuild the HIPPI MAC header. This is called after an ARP has
95 * completed on this sk_buff. We now let ARP fill in the other fields.
98 static int hippi_rebuild_header(struct sk_buff *skb)
100 struct hippi_hdr *hip = (struct hippi_hdr *)skb->data;
103 * Only IP is currently supported
106 if(hip->snap.ethertype != htons(ETH_P_IP))
108 printk(KERN_DEBUG "%s: unable to resolve type %X addresses.\n",skb->dev->name,ntohs(hip->snap.ethertype));
113 * We don't support dynamic ARP on HIPPI, but we use the ARP
114 * static ARP tables to hold the I-FIELDs.
116 return arp_find(hip->le.daddr, skb);
121 * Determine the packet's protocol ID.
124 __be16 hippi_type_trans(struct sk_buff *skb, struct net_device *dev)
126 struct hippi_hdr *hip;
129 * This is actually wrong ... question is if we really should
130 * set the raw address here.
133 skb_reset_mac_header(skb);
134 hip = (struct hippi_hdr *)skb_mac_header(skb);
135 skb_pull(skb, HIPPI_HLEN);
138 * No fancy promisc stuff here now.
141 return hip->snap.ethertype;
144 EXPORT_SYMBOL(hippi_type_trans);
146 int hippi_change_mtu(struct net_device *dev, int new_mtu)
149 * HIPPI's got these nice large MTUs.
151 if ((new_mtu < 68) || (new_mtu > 65280))
156 EXPORT_SYMBOL(hippi_change_mtu);
159 * For HIPPI we will actually use the lower 4 bytes of the hardware
160 * address as the I-FIELD rather than the actual hardware address.
162 int hippi_mac_addr(struct net_device *dev, void *p)
164 struct sockaddr *addr = p;
165 if (netif_running(dev))
167 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
170 EXPORT_SYMBOL(hippi_mac_addr);
172 int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
174 /* Never send broadcast/multicast ARP messages */
177 /* In IPv6 unicast probes are valid even on NBMA,
178 * because they are encapsulated in normal IPv6 protocol.
179 * Should be a generic flag.
181 if (p->tbl->family != AF_INET6)
185 EXPORT_SYMBOL(hippi_neigh_setup_dev);
187 static const struct header_ops hippi_header_ops = {
188 .create = hippi_header,
189 .rebuild = hippi_rebuild_header,
193 static void hippi_setup(struct net_device *dev)
195 dev->header_ops = &hippi_header_ops;
198 * We don't support HIPPI `ARP' for the time being, and probably
199 * never will unless someone else implements it. However we
200 * still need a fake ARPHRD to make ifconfig and friends play ball.
202 dev->type = ARPHRD_HIPPI;
203 dev->hard_header_len = HIPPI_HLEN;
205 dev->addr_len = HIPPI_ALEN;
206 dev->tx_queue_len = 25 /* 5 */;
207 memset(dev->broadcast, 0xFF, HIPPI_ALEN);
211 * HIPPI doesn't support broadcast+multicast and we only use
212 * static ARP tables. ARP is disabled by hippi_neigh_setup_dev.
218 * alloc_hippi_dev - Register HIPPI device
219 * @sizeof_priv: Size of additional driver-private structure to be allocated
220 * for this HIPPI device
222 * Fill in the fields of the device structure with HIPPI-generic values.
224 * Constructs a new net device, complete with a private data area of
225 * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for
226 * this private data area.
229 struct net_device *alloc_hippi_dev(int sizeof_priv)
231 return alloc_netdev(sizeof_priv, "hip%d", hippi_setup);
234 EXPORT_SYMBOL(alloc_hippi_dev);