nand_spl/nand_boot.c

   1 /*
   2  * (C) Copyright 2006-2007
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License as
   7  * published by the Free Software Foundation; either version 2 of
   8  * the License, or (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  18  * MA 02111-1307 USA
  19  */
  20
  21 #include <common.h>
  22 #include <nand.h>
  23
  24 #define CFG_NAND_READ_DELAY \
  25         { volatile int dummy; int i; for (i=0; i<10000; i++) dummy = i; }
  26
  27 static int nand_ecc_pos[] = CFG_NAND_ECCPOS;
  28
  29 extern void board_nand_init(struct nand_chip *nand);
  30
  31 static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd)
  32 {
  33         struct nand_chip *this = mtd->priv;
  34         int page_addr = page + block * CFG_NAND_PAGE_COUNT;
  35
  36         if (this->dev_ready)
  37                 this->dev_ready(mtd);
  38         else
  39                 CFG_NAND_READ_DELAY;
  40
  41         /* Begin command latch cycle */
  42         this->hwcontrol(mtd, NAND_CTL_SETCLE);
  43         this->write_byte(mtd, cmd);
  44         /* Set ALE and clear CLE to start address cycle */
  45         this->hwcontrol(mtd, NAND_CTL_CLRCLE);
  46         this->hwcontrol(mtd, NAND_CTL_SETALE);
  47         /* Column address */
  48         this->write_byte(mtd, offs);                                    /* A[7:0] */
  49         this->write_byte(mtd, (uchar)(page_addr & 0xff));               /* A[16:9] */
  50         this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff));        /* A[24:17] */
  51 #ifdef CFG_NAND_4_ADDR_CYCLE
  52         /* One more address cycle for devices > 32MiB */
  53         this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f));       /* A[xx:25] */
  54 #endif
  55         /* Latch in address */
  56         this->hwcontrol(mtd, NAND_CTL_CLRALE);
  57
  58         /*
  59          * Wait a while for the data to be ready
  60          */
  61         if (this->dev_ready)
  62                 this->dev_ready(mtd);
  63         else
  64                 CFG_NAND_READ_DELAY;
  65
  66         return 0;
  67 }
  68
  69 static int nand_is_bad_block(struct mtd_info *mtd, int block)
  70 {
  71         struct nand_chip *this = mtd->priv;
  72
  73         nand_command(mtd, block, 0, CFG_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB);
  74
  75         /*
  76          * Read on byte
  77          */
  78         if (this->read_byte(mtd) != 0xff)
  79                 return 1;
  80
  81         return 0;
  82 }
  83
  84 static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
  85 {
  86         struct nand_chip *this = mtd->priv;
  87         u_char *ecc_calc;
  88         u_char *ecc_code;
  89         u_char *oob_data;
  90         int i;
  91         int eccsize = CFG_NAND_ECCSIZE;
  92         int eccbytes = CFG_NAND_ECCBYTES;
  93         int eccsteps = CFG_NAND_ECCSTEPS;
  94         uint8_t *p = dst;
  95         int stat;
  96
  97         nand_command(mtd, block, page, 0, NAND_CMD_READ0);
  98
  99         /* No malloc available for now, just use some temporary locations
 100          * in SDRAM
 101          */
 102         ecc_calc = (u_char *)(CFG_SDRAM_BASE + 0x10000);
 103         ecc_code = ecc_calc + 0x100;
 104         oob_data = ecc_calc + 0x200;
 105
 106         for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 107                 this->enable_hwecc(mtd, NAND_ECC_READ);
 108                 this->read_buf(mtd, p, eccsize);
 109                 this->calculate_ecc(mtd, p, &ecc_calc[i]);
 110         }
 111         this->read_buf(mtd, oob_data, CFG_NAND_OOBSIZE);
 112
 113         /* Pick the ECC bytes out of the oob data */
 114         for (i = 0; i < CFG_NAND_ECCTOTAL; i++)
 115                 ecc_code[i] = oob_data[nand_ecc_pos[i]];
 116
 117         eccsteps = CFG_NAND_ECCSTEPS;
 118         p = dst;
 119
 120         for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 121                 /* No chance to do something with the possible error message
 122                  * from correct_data(). We just hope that all possible errors
 123                  * are corrected by this routine.
 124                  */
 125                 stat = this->correct_data(mtd, p, &ecc_code[i], &ecc_calc[i]);
 126         }
 127
 128         return 0;
 129 }
 130
 131 static int nand_load(struct mtd_info *mtd, int offs, int uboot_size, uchar *dst)
 132 {
 133         int block;
 134         int blockcopy_count;
 135         int page;
 136
 137         /*
 138          * offs has to be aligned to a block address!
 139          */
 140         block = offs / CFG_NAND_BLOCK_SIZE;
 141         blockcopy_count = 0;
 142
 143         while (blockcopy_count < (uboot_size / CFG_NAND_BLOCK_SIZE)) {
 144                 if (!nand_is_bad_block(mtd, block)) {
 145                         /*
 146                          * Skip bad blocks
 147                          */
 148                         for (page = 0; page < CFG_NAND_PAGE_COUNT; page++) {
 149                                 nand_read_page(mtd, block, page, dst);
 150                                 dst += CFG_NAND_PAGE_SIZE;
 151                         }
 152
 153                         blockcopy_count++;
 154                 }
 155
 156                 block++;
 157         }
 158
 159         return 0;
 160 }
 161
 162 void nand_boot(void)
 163 {
 164         ulong mem_size;
 165         struct nand_chip nand_chip;
 166         nand_info_t nand_info;
 167         int ret;
 168         void (*uboot)(void);
 169
 170         /*
 171          * Init sdram, so we have access to memory
 172          */
 173         mem_size = initdram(0);
 174
 175         /*
 176          * Init board specific nand support
 177          */
 178         nand_info.priv = &nand_chip;
 179         nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void  __iomem *)CFG_NAND_BASE;
 180         nand_chip.dev_ready = NULL;     /* preset to NULL */
 181         board_nand_init(&nand_chip);
 182
 183         /*
 184          * Load U-Boot image from NAND into RAM
 185          */
 186         ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE,
 187                         (uchar *)CFG_NAND_U_BOOT_DST);
 188
 189         /*
 190          * Jump to U-Boot image
 191          */
 192         uboot = (void (*)(void))CFG_NAND_U_BOOT_START;
 193         (*uboot)();
 194 }