Upload Tizen:Base source
[toolchains/nspr.git] / mozilla / nsprpub / pr / include / prerr.h
1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
2 /* ***** BEGIN LICENSE BLOCK *****
3  * Version: MPL 1.1/GPL 2.0/LGPL 2.1
4  *
5  * The contents of this file are subject to the Mozilla Public License Version
6  * 1.1 (the "License"); you may not use this file except in compliance with
7  * the License. You may obtain a copy of the License at
8  * http://www.mozilla.org/MPL/
9  *
10  * Software distributed under the License is distributed on an "AS IS" basis,
11  * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
12  * for the specific language governing rights and limitations under the
13  * License.
14  *
15  * The Original Code is the Netscape Portable Runtime (NSPR).
16  *
17  * The Initial Developer of the Original Code is
18  * Netscape Communications Corporation.
19  * Portions created by the Initial Developer are Copyright (C) 1998-2000
20  * the Initial Developer. All Rights Reserved.
21  *
22  * Contributor(s):
23  *
24  * Alternatively, the contents of this file may be used under the terms of
25  * either the GNU General Public License Version 2 or later (the "GPL"), or
26  * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
27  * in which case the provisions of the GPL or the LGPL are applicable instead
28  * of those above. If you wish to allow use of your version of this file only
29  * under the terms of either the GPL or the LGPL, and not to allow others to
30  * use your version of this file under the terms of the MPL, indicate your
31  * decision by deleting the provisions above and replace them with the notice
32  * and other provisions required by the GPL or the LGPL. If you do not delete
33  * the provisions above, a recipient may use your version of this file under
34  * the terms of any one of the MPL, the GPL or the LGPL.
35  *
36  * ***** END LICENSE BLOCK ***** */
37
38 #ifndef prerr_h___
39 #define prerr_h___
40
41 /*
42  *
43  * prerr.h
44  * This file is automatically generated; please do not edit it.
45  */
46
47 /* Memory allocation attempt failed */
48 #define PR_OUT_OF_MEMORY_ERROR                   (-6000L)
49
50 /* Invalid file descriptor */
51 #define PR_BAD_DESCRIPTOR_ERROR                  (-5999L)
52
53 /* The operation would have blocked */
54 #define PR_WOULD_BLOCK_ERROR                     (-5998L)
55
56 /* Invalid memory address argument */
57 #define PR_ACCESS_FAULT_ERROR                    (-5997L)
58
59 /* Invalid function for file type */
60 #define PR_INVALID_METHOD_ERROR                  (-5996L)
61
62 /* Invalid memory address argument */
63 #define PR_ILLEGAL_ACCESS_ERROR                  (-5995L)
64
65 /* Some unknown error has occurred */
66 #define PR_UNKNOWN_ERROR                         (-5994L)
67
68 /* Operation interrupted by another thread */
69 #define PR_PENDING_INTERRUPT_ERROR               (-5993L)
70
71 /* function not implemented */
72 #define PR_NOT_IMPLEMENTED_ERROR                 (-5992L)
73
74 /* I/O function error */
75 #define PR_IO_ERROR                              (-5991L)
76
77 /* I/O operation timed out */
78 #define PR_IO_TIMEOUT_ERROR                      (-5990L)
79
80 /* I/O operation on busy file descriptor */
81 #define PR_IO_PENDING_ERROR                      (-5989L)
82
83 /* The directory could not be opened */
84 #define PR_DIRECTORY_OPEN_ERROR                  (-5988L)
85
86 /* Invalid function argument */
87 #define PR_INVALID_ARGUMENT_ERROR                (-5987L)
88
89 /* Network address not available (in use?) */
90 #define PR_ADDRESS_NOT_AVAILABLE_ERROR           (-5986L)
91
92 /* Network address type not supported */
93 #define PR_ADDRESS_NOT_SUPPORTED_ERROR           (-5985L)
94
95 /* Already connected */
96 #define PR_IS_CONNECTED_ERROR                    (-5984L)
97
98 /* Network address is invalid */
99 #define PR_BAD_ADDRESS_ERROR                     (-5983L)
100
101 /* Local Network address is in use */
102 #define PR_ADDRESS_IN_USE_ERROR                  (-5982L)
103
104 /* Connection refused by peer */
105 #define PR_CONNECT_REFUSED_ERROR                 (-5981L)
106
107 /* Network address is presently unreachable */
108 #define PR_NETWORK_UNREACHABLE_ERROR             (-5980L)
109
110 /* Connection attempt timed out */
111 #define PR_CONNECT_TIMEOUT_ERROR                 (-5979L)
112
113 /* Network file descriptor is not connected */
114 #define PR_NOT_CONNECTED_ERROR                   (-5978L)
115
116 /* Failure to load dynamic library */
117 #define PR_LOAD_LIBRARY_ERROR                    (-5977L)
118
119 /* Failure to unload dynamic library */
120 #define PR_UNLOAD_LIBRARY_ERROR                  (-5976L)
121
122 /* Symbol not found in any of the loaded dynamic libraries */
123 #define PR_FIND_SYMBOL_ERROR                     (-5975L)
124
125 /* Insufficient system resources */
126 #define PR_INSUFFICIENT_RESOURCES_ERROR          (-5974L)
127
128 /* A directory lookup on a network address has failed */
129 #define PR_DIRECTORY_LOOKUP_ERROR                (-5973L)
130
131 /* Attempt to access a TPD key that is out of range */
132 #define PR_TPD_RANGE_ERROR                       (-5972L)
133
134 /* Process open FD table is full */
135 #define PR_PROC_DESC_TABLE_FULL_ERROR            (-5971L)
136
137 /* System open FD table is full */
138 #define PR_SYS_DESC_TABLE_FULL_ERROR             (-5970L)
139
140 /* Network operation attempted on non-network file descriptor */
141 #define PR_NOT_SOCKET_ERROR                      (-5969L)
142
143 /* TCP-specific function attempted on a non-TCP file descriptor */
144 #define PR_NOT_TCP_SOCKET_ERROR                  (-5968L)
145
146 /* TCP file descriptor is already bound */
147 #define PR_SOCKET_ADDRESS_IS_BOUND_ERROR         (-5967L)
148
149 /* Access Denied */
150 #define PR_NO_ACCESS_RIGHTS_ERROR                (-5966L)
151
152 /* The requested operation is not supported by the platform */
153 #define PR_OPERATION_NOT_SUPPORTED_ERROR         (-5965L)
154
155 /* The host operating system does not support the protocol requested */
156 #define PR_PROTOCOL_NOT_SUPPORTED_ERROR          (-5964L)
157
158 /* Access to the remote file has been severed */
159 #define PR_REMOTE_FILE_ERROR                     (-5963L)
160
161 /* The value requested is too large to be stored in the data buffer provided */
162 #define PR_BUFFER_OVERFLOW_ERROR                 (-5962L)
163
164 /* TCP connection reset by peer */
165 #define PR_CONNECT_RESET_ERROR                   (-5961L)
166
167 /* Unused */
168 #define PR_RANGE_ERROR                           (-5960L)
169
170 /* The operation would have deadlocked */
171 #define PR_DEADLOCK_ERROR                        (-5959L)
172
173 /* The file is already locked */
174 #define PR_FILE_IS_LOCKED_ERROR                  (-5958L)
175
176 /* Write would result in file larger than the system allows */
177 #define PR_FILE_TOO_BIG_ERROR                    (-5957L)
178
179 /* The device for storing the file is full */
180 #define PR_NO_DEVICE_SPACE_ERROR                 (-5956L)
181
182 /* Unused */
183 #define PR_PIPE_ERROR                            (-5955L)
184
185 /* Unused */
186 #define PR_NO_SEEK_DEVICE_ERROR                  (-5954L)
187
188 /* Cannot perform a normal file operation on a directory */
189 #define PR_IS_DIRECTORY_ERROR                    (-5953L)
190
191 /* Symbolic link loop */
192 #define PR_LOOP_ERROR                            (-5952L)
193
194 /* File name is too long */
195 #define PR_NAME_TOO_LONG_ERROR                   (-5951L)
196
197 /* File not found */
198 #define PR_FILE_NOT_FOUND_ERROR                  (-5950L)
199
200 /* Cannot perform directory operation on a normal file */
201 #define PR_NOT_DIRECTORY_ERROR                   (-5949L)
202
203 /* Cannot write to a read-only file system */
204 #define PR_READ_ONLY_FILESYSTEM_ERROR            (-5948L)
205
206 /* Cannot delete a directory that is not empty */
207 #define PR_DIRECTORY_NOT_EMPTY_ERROR             (-5947L)
208
209 /* Cannot delete or rename a file object while the file system is busy */
210 #define PR_FILESYSTEM_MOUNTED_ERROR              (-5946L)
211
212 /* Cannot rename a file to a file system on another device */
213 #define PR_NOT_SAME_DEVICE_ERROR                 (-5945L)
214
215 /* The directory object in the file system is corrupted */
216 #define PR_DIRECTORY_CORRUPTED_ERROR             (-5944L)
217
218 /* Cannot create or rename a filename that already exists */
219 #define PR_FILE_EXISTS_ERROR                     (-5943L)
220
221 /* Directory is full.  No additional filenames may be added */
222 #define PR_MAX_DIRECTORY_ENTRIES_ERROR           (-5942L)
223
224 /* The required device was in an invalid state */
225 #define PR_INVALID_DEVICE_STATE_ERROR            (-5941L)
226
227 /* The device is locked */
228 #define PR_DEVICE_IS_LOCKED_ERROR                (-5940L)
229
230 /* No more entries in the directory */
231 #define PR_NO_MORE_FILES_ERROR                   (-5939L)
232
233 /* Encountered end of file */
234 #define PR_END_OF_FILE_ERROR                     (-5938L)
235
236 /* Seek error */
237 #define PR_FILE_SEEK_ERROR                       (-5937L)
238
239 /* The file is busy */
240 #define PR_FILE_IS_BUSY_ERROR                    (-5936L)
241
242 /* The I/O operation was aborted */
243 #define PR_OPERATION_ABORTED_ERROR               (-5935L)
244
245 /* Operation is still in progress (probably a non-blocking connect) */
246 #define PR_IN_PROGRESS_ERROR                     (-5934L)
247
248 /* Operation has already been initiated (probably a non-blocking connect) */
249 #define PR_ALREADY_INITIATED_ERROR               (-5933L)
250
251 /* The wait group is empty */
252 #define PR_GROUP_EMPTY_ERROR                     (-5932L)
253
254 /* Object state improper for request */
255 #define PR_INVALID_STATE_ERROR                   (-5931L)
256
257 /* Network is down */
258 #define PR_NETWORK_DOWN_ERROR                    (-5930L)
259
260 /* Socket shutdown */
261 #define PR_SOCKET_SHUTDOWN_ERROR                 (-5929L)
262
263 /* Connection aborted */
264 #define PR_CONNECT_ABORTED_ERROR                 (-5928L)
265
266 /* Host is unreachable */
267 #define PR_HOST_UNREACHABLE_ERROR                (-5927L)
268
269 /* The library is not loaded */
270 #define PR_LIBRARY_NOT_LOADED_ERROR              (-5926L)
271
272 /* The one-time function was previously called and failed. Its error code is no longer available */
273 #define PR_CALL_ONCE_ERROR                       (-5925L)
274
275 /* Placeholder for the end of the list */
276 #define PR_MAX_ERROR                             (-5924L)
277
278 extern void nspr_InitializePRErrorTable(void);
279 #define ERROR_TABLE_BASE_nspr (-6000L)
280
281 #endif /* prerr_h___ */