libhsail-rt/Makefile.in

   1 # Makefile.in generated by automake 1.15.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2017 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 # Makefile.am -- libhsail-rt library Makefile.
  18
  19 # Starting point copied from libcilkrts:
  20 #  @copyright
  21 #  Copyright (C) 2011, 2013, Intel Corporation
  22 #  All rights reserved.
  23 #
  24 #  @copyright
  25 #  Redistribution and use in source and binary forms, with or without
  26 #  modification, are permitted provided that the following conditions
  27 #  are met:
  28 #
  29 #    * Redistributions of source code must retain the above copyright
  30 #      notice, this list of conditions and the following disclaimer.
  31 #    * Redistributions in binary form must reproduce the above copyright
  32 #      notice, this list of conditions and the following disclaimer in
  33 #      the documentation and/or other materials provided with the
  34 #      distribution.
  35 #    * Neither the name of Intel Corporation nor the names of its
  36 #      contributors may be used to endorse or promote products derived
  37 #      from this software without specific prior written permission.
  38 #
  39 #  @copyright
  40 #  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  41 #  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  42 #  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  43 #  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  44 #  HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  45 #  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  46 #  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
  47 #  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
  48 #  AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  49 #  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
  50 #  WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  51 #  POSSIBILITY OF SUCH DAMAGE.
  52
  53 # libhsail-rt modifications:
  54 # Contributed by Pekka Jaaskelainen <pekka.jaaskelainen@parmance.com>
  55 # for General Processor Tech.
  56 # Use of this source code is governed by a BSD-style
  57 # license that can be found in the LICENSE file.
  58
  59 # Process this file with autoreconf to produce Makefile.in.
  60
  61 VPATH = @srcdir@
  62 am__is_gnu_make = { \
  63   if test -z '$(MAKELEVEL)'; then \
  64     false; \
  65   elif test -n '$(MAKE_HOST)'; then \
  66     true; \
  67   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  68     true; \
  69   else \
  70     false; \
  71   fi; \
  72 }
  73 am__make_running_with_option = \
  74   case $${target_option-} in \
  75       ?) ;; \
  76       *) echo "am__make_running_with_option: internal error: invalid" \
  77               "target option '$${target_option-}' specified" >&2; \
  78          exit 1;; \
  79   esac; \
  80   has_opt=no; \
  81   sane_makeflags=$$MAKEFLAGS; \
  82   if $(am__is_gnu_make); then \
  83     sane_makeflags=$$MFLAGS; \
  84   else \
  85     case $$MAKEFLAGS in \
  86       *\\[\ \   ]*) \
  87         bs=\\; \
  88         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  89           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  90     esac; \
  91   fi; \
  92   skip_next=no; \
  93   strip_trailopt () \
  94   { \
  95     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  96   }; \
  97   for flg in $$sane_makeflags; do \
  98     test $$skip_next = yes && { skip_next=no; continue; }; \
  99     case $$flg in \
 100       *=*|--*) continue;; \
 101         -*I) strip_trailopt 'I'; skip_next=yes;; \
 102       -*I?*) strip_trailopt 'I';; \
 103         -*O) strip_trailopt 'O'; skip_next=yes;; \
 104       -*O?*) strip_trailopt 'O';; \
 105         -*l) strip_trailopt 'l'; skip_next=yes;; \
 106       -*l?*) strip_trailopt 'l';; \
 107       -[dEDm]) skip_next=yes;; \
 108       -[JT]) skip_next=yes;; \
 109     esac; \
 110     case $$flg in \
 111       *$$target_option*) has_opt=yes; break;; \
 112     esac; \
 113   done; \
 114   test $$has_opt = yes
 115 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
 116 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 117 pkgdatadir = $(datadir)/@PACKAGE@
 118 pkgincludedir = $(includedir)/@PACKAGE@
 119 pkglibdir = $(libdir)/@PACKAGE@
 120 pkglibexecdir = $(libexecdir)/@PACKAGE@
 121 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 122 install_sh_DATA = $(install_sh) -c -m 644
 123 install_sh_PROGRAM = $(install_sh) -c
 124 install_sh_SCRIPT = $(install_sh) -c
 125 INSTALL_HEADER = $(INSTALL_DATA)
 126 transform = $(program_transform_name)
 127 NORMAL_INSTALL = :
 128 PRE_INSTALL = :
 129 POST_INSTALL = :
 130 NORMAL_UNINSTALL = :
 131 PRE_UNINSTALL = :
 132 POST_UNINSTALL = :
 133 build_triplet = @build@
 134 host_triplet = @host@
 135 target_triplet = @target@
 136 subdir = .
 137 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 138 am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
 139         $(top_srcdir)/../config/depstand.m4 \
 140         $(top_srcdir)/../config/lead-dot.m4 \
 141         $(top_srcdir)/../config/override.m4 \
 142         $(top_srcdir)/../config/toolexeclibdir.m4 \
 143         $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
 144         $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
 145         $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.ac
 146 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 147         $(ACLOCAL_M4)
 148 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
 149         $(am__configure_deps)
 150 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 151  configure.lineno config.status.lineno
 152 CONFIG_HEADER = target-config.h
 153 CONFIG_CLEAN_FILES =
 154 CONFIG_CLEAN_VPATH_FILES =
 155 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 156 am__vpath_adj = case $$p in \
 157     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 158     *) f=$$p;; \
 159   esac;
 160 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 161 am__install_max = 40
 162 am__nobase_strip_setup = \
 163   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 164 am__nobase_strip = \
 165   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 166 am__nobase_list = $(am__nobase_strip_setup); \
 167   for p in $$list; do echo "$$p $$p"; done | \
 168   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 169   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 170     if (++n[$$2] == $(am__install_max)) \
 171       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 172     END { for (dir in files) print dir, files[dir] }'
 173 am__base_list = \
 174   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 175   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 176 am__uninstall_files_from_dir = { \
 177   test -z "$$files" \
 178     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 179     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 180          $(am__cd) "$$dir" && rm -f $$files; }; \
 181   }
 182 am__installdirs = "$(DESTDIR)$(toolexeclibdir)"
 183 LTLIBRARIES = $(toolexeclib_LTLIBRARIES)
 184 libhsail_rt_la_LIBADD =
 185 am__dirstamp = $(am__leading_dot)dirstamp
 186 am__objects_1 = rt/arithmetic.lo rt/atomics.lo rt/bitstring.lo \
 187         rt/fbarrier.lo rt/fp16.lo rt/misc.lo rt/multimedia.lo \
 188         rt/queue.lo rt/sat_arithmetic.lo rt/segment.lo rt/workitems.lo \
 189         rt/fibers.lo
 190 am_libhsail_rt_la_OBJECTS = $(am__objects_1)
 191 libhsail_rt_la_OBJECTS = $(am_libhsail_rt_la_OBJECTS)
 192 AM_V_lt = $(am__v_lt_@AM_V@)
 193 am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
 194 am__v_lt_0 = --silent
 195 am__v_lt_1 =
 196 libhsail_rt_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
 197         $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
 198         $(AM_CFLAGS) $(CFLAGS) $(libhsail_rt_la_LDFLAGS) $(LDFLAGS) -o \
 199         $@
 200 AM_V_P = $(am__v_P_@AM_V@)
 201 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 202 am__v_P_0 = false
 203 am__v_P_1 = :
 204 AM_V_GEN = $(am__v_GEN_@AM_V@)
 205 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 206 am__v_GEN_0 = @echo "  GEN     " $@;
 207 am__v_GEN_1 =
 208 AM_V_at = $(am__v_at_@AM_V@)
 209 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 210 am__v_at_0 = @
 211 am__v_at_1 =
 212 DEFAULT_INCLUDES = -I.@am__isrc@
 213 depcomp = $(SHELL) $(top_srcdir)/../depcomp
 214 am__depfiles_maybe = depfiles
 215 am__mv = mv -f
 216 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 217         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 218 LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 219         $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
 220         $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
 221         $(AM_CFLAGS) $(CFLAGS)
 222 AM_V_CC = $(am__v_CC_@AM_V@)
 223 am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
 224 am__v_CC_0 = @echo "  CC      " $@;
 225 am__v_CC_1 =
 226 CCLD = $(CC)
 227 LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 228         $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 229         $(AM_LDFLAGS) $(LDFLAGS) -o $@
 230 AM_V_CCLD = $(am__v_CCLD_@AM_V@)
 231 am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
 232 am__v_CCLD_0 = @echo "  CCLD    " $@;
 233 am__v_CCLD_1 =
 234 SOURCES = $(libhsail_rt_la_SOURCES)
 235 am__can_run_installinfo = \
 236   case $$AM_UPDATE_INFO_DIR in \
 237     n|no|NO) false;; \
 238     *) (install-info --version) >/dev/null 2>&1;; \
 239   esac
 240 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
 241         $(LISP)target-config.h.in
 242 # Read a list of newline-separated strings from the standard input,
 243 # and print each of them once, without duplicates.  Input order is
 244 # *not* preserved.
 245 am__uniquify_input = $(AWK) '\
 246   BEGIN { nonempty = 0; } \
 247   { items[$$0] = 1; nonempty = 1; } \
 248   END { if (nonempty) { for (i in items) print i; }; } \
 249 '
 250 # Make sure the list of sources is unique.  This is necessary because,
 251 # e.g., the same source file might be shared among _SOURCES variables
 252 # for different programs/libraries.
 253 am__define_uniq_tagged_files = \
 254   list='$(am__tagged_files)'; \
 255   unique=`for i in $$list; do \
 256     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 257   done | $(am__uniquify_input)`
 258 ETAGS = etags
 259 CTAGS = ctags
 260 CSCOPE = cscope
 261 AM_RECURSIVE_TARGETS = cscope
 262 ACLOCAL = @ACLOCAL@
 263 AMTAR = @AMTAR@
 264 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 265 AR = @AR@
 266 AUTOCONF = @AUTOCONF@
 267 AUTOHEADER = @AUTOHEADER@
 268 AUTOMAKE = @AUTOMAKE@
 269 AWK = @AWK@
 270 CC = @CC@
 271 CCDEPMODE = @CCDEPMODE@
 272 CFLAGS = @CFLAGS@
 273 CPP = @CPP@
 274 CPPFLAGS = @CPPFLAGS@
 275 CXX = @CXX@
 276 CXXCPP = @CXXCPP@
 277 CXXDEPMODE = @CXXDEPMODE@
 278 CXXFLAGS = @CXXFLAGS@
 279 CYGPATH_W = @CYGPATH_W@
 280 DEFS = @DEFS@
 281 DEPDIR = @DEPDIR@
 282 DSYMUTIL = @DSYMUTIL@
 283 DUMPBIN = @DUMPBIN@
 284 ECHO_C = @ECHO_C@
 285 ECHO_N = @ECHO_N@
 286 ECHO_T = @ECHO_T@
 287 EGREP = @EGREP@
 288 EXEEXT = @EXEEXT@
 289 FGREP = @FGREP@
 290 GREP = @GREP@
 291 INSTALL = @INSTALL@
 292 INSTALL_DATA = @INSTALL_DATA@
 293 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 294 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 295 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 296 LD = @LD@
 297 LDFLAGS = @LDFLAGS@
 298 LIBOBJS = @LIBOBJS@
 299 LIBS = @LIBS@
 300 LIBTOOL = @LIBTOOL@
 301 LIPO = @LIPO@
 302 LN_S = @LN_S@
 303 LTLIBOBJS = @LTLIBOBJS@
 304 MAINT = @MAINT@
 305 MAKEINFO = @MAKEINFO@
 306 MKDIR_P = @MKDIR_P@
 307 NM = @NM@
 308 NMEDIT = @NMEDIT@
 309 OBJDUMP = @OBJDUMP@
 310 OBJEXT = @OBJEXT@
 311 OTOOL = @OTOOL@
 312 OTOOL64 = @OTOOL64@
 313 PACKAGE = @PACKAGE@
 314 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 315 PACKAGE_NAME = @PACKAGE_NAME@
 316 PACKAGE_STRING = @PACKAGE_STRING@
 317 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 318 PACKAGE_URL = @PACKAGE_URL@
 319 PACKAGE_VERSION = @PACKAGE_VERSION@
 320 PATH_SEPARATOR = @PATH_SEPARATOR@
 321 RANLIB = @RANLIB@
 322 SED = @SED@
 323 SET_MAKE = @SET_MAKE@
 324 SHELL = @SHELL@
 325 STRIP = @STRIP@
 326 VERSION = @VERSION@
 327 abs_builddir = @abs_builddir@
 328 abs_srcdir = @abs_srcdir@
 329 abs_top_builddir = @abs_top_builddir@
 330 abs_top_srcdir = @abs_top_srcdir@
 331 ac_ct_CC = @ac_ct_CC@
 332 ac_ct_CXX = @ac_ct_CXX@
 333 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 334 am__include = @am__include@
 335 am__leading_dot = @am__leading_dot@
 336 am__quote = @am__quote@
 337 am__tar = @am__tar@
 338 am__untar = @am__untar@
 339 bindir = @bindir@
 340 build = @build@
 341 build_alias = @build_alias@
 342 build_cpu = @build_cpu@
 343 build_os = @build_os@
 344 build_vendor = @build_vendor@
 345 builddir = @builddir@
 346 config_dir = @config_dir@
 347 datadir = @datadir@
 348 datarootdir = @datarootdir@
 349 docdir = @docdir@
 350 dvidir = @dvidir@
 351 exec_prefix = @exec_prefix@
 352 get_gcc_base_ver = @get_gcc_base_ver@
 353 host = @host@
 354 host_alias = @host_alias@
 355 host_cpu = @host_cpu@
 356 host_os = @host_os@
 357 host_vendor = @host_vendor@
 358 htmldir = @htmldir@
 359 includedir = @includedir@
 360 infodir = @infodir@
 361 install_sh = @install_sh@
 362 libdir = @libdir@
 363 libexecdir = @libexecdir@
 364 localedir = @localedir@
 365 localstatedir = @localstatedir@
 366 mandir = @mandir@
 367 mkdir_p = @mkdir_p@
 368 oldincludedir = @oldincludedir@
 369 pdfdir = @pdfdir@
 370 prefix = @prefix@
 371 program_transform_name = @program_transform_name@
 372 psdir = @psdir@
 373 sbindir = @sbindir@
 374 sharedstatedir = @sharedstatedir@
 375 srcdir = @srcdir@
 376 sysconfdir = @sysconfdir@
 377 target = @target@
 378 target_alias = @target_alias@
 379 target_cpu = @target_cpu@
 380 target_os = @target_os@
 381 target_vendor = @target_vendor@
 382 toolexecdir = @toolexecdir@
 383 toolexeclibdir = @toolexeclibdir@
 384 top_build_prefix = @top_build_prefix@
 385 top_builddir = @top_builddir@
 386 top_srcdir = @top_srcdir@
 387 AUTOMAKE_OPTIONS = foreign subdir-objects
 388 gcc_version := $(shell @get_gcc_base_ver@ $(top_srcdir)/../gcc/BASE-VER)
 389 MAINT_CHARSET = latin1
 390 mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
 391 ACLOCAL_AMFLAGS = -I .. -I ../config
 392 WARN_CFLAGS = $(WARN_FLAGS) $(WERROR)
 393
 394 # -I/-D flags to pass when compiling.
 395 AM_CPPFLAGS = -I$(srcdir)/rt -I$(srcdir)/include/internal
 396 AM_CFLAGS = \
 397         -I $(srcdir)/../include \
 398         -I $(srcdir)/../libgcc \
 399         -I $(MULTIBUILDTOP)../../gcc/include $(PTH_CFLAGS)
 400
 401 toolexeclib_LTLIBRARIES = libhsail-rt.la
 402 runtime_files = \
 403         rt/arithmetic.c \
 404         rt/atomics.c \
 405         rt/bitstring.c \
 406         rt/fbarrier.c \
 407         rt/fp16.c \
 408         rt/misc.c \
 409         rt/multimedia.c \
 410         rt/queue.c \
 411         rt/sat_arithmetic.c \
 412         rt/segment.c \
 413         rt/workitems.c \
 414         rt/fibers.c
 415
 416 libhsail_rt_la_SOURCES = $(runtime_files)
 417 libhsail_rt_la_LDFLAGS = -rpath '$(libdir)'
 418
 419 # Work around what appears to be a GNU make bug handling MAKEFLAGS
 420 # values defined in terms of make variables, as is the case for CC and
 421 # friends when we are called from the top level Makefile.
 422 AM_MAKEFLAGS = \
 423        "AR_FLAGS=$(AR_FLAGS)" \
 424        "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
 425        "CFLAGS=$(CFLAGS)" \
 426        "CXXFLAGS=$(CXXFLAGS)" \
 427        "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
 428        "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
 429        "INSTALL=$(INSTALL)" \
 430        "INSTALL_DATA=$(INSTALL_DATA)" \
 431        "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 432        "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
 433        "JC1FLAGS=$(JC1FLAGS)" \
 434        "LDFLAGS=$(LDFLAGS)" \
 435        "LIBCFLAGS=$(LIBCFLAGS)" \
 436        "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
 437        "MAKE=$(MAKE)" \
 438        "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
 439        "PICFLAG=$(PICFLAG)" \
 440        "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
 441        "SHELL=$(SHELL)" \
 442        "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 443        "exec_prefix=$(exec_prefix)" \
 444        "infodir=$(infodir)" \
 445        "libdir=$(libdir)" \
 446        "prefix=$(prefix)" \
 447        "includedir=$(includedir)" \
 448        "AR=$(AR)" \
 449        "AS=$(AS)" \
 450        "LD=$(LD)" \
 451        "LIBCFLAGS=$(LIBCFLAGS)" \
 452        "NM=$(NM)" \
 453        "PICFLAG=$(PICFLAG)" \
 454        "RANLIB=$(RANLIB)" \
 455        "DESTDIR=$(DESTDIR)"
 456
 457 MAKEOVERRIDES =
 458 all: target-config.h
 459         $(MAKE) $(AM_MAKEFLAGS) all-am
 460
 461 .SUFFIXES:
 462 .SUFFIXES: .c .lo .o .obj
 463 am--refresh: Makefile
 464         @:
 465 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 466         @for dep in $?; do \
 467           case '$(am__configure_deps)' in \
 468             *$$dep*) \
 469               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 470               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 471                 && exit 0; \
 472               exit 1;; \
 473           esac; \
 474         done; \
 475         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 476         $(am__cd) $(top_srcdir) && \
 477           $(AUTOMAKE) --foreign Makefile
 478 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 479         @case '$?' in \
 480           *config.status*) \
 481             echo ' $(SHELL) ./config.status'; \
 482             $(SHELL) ./config.status;; \
 483           *) \
 484             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 485             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 486         esac;
 487
 488 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 489         $(SHELL) ./config.status --recheck
 490
 491 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 492         $(am__cd) $(srcdir) && $(AUTOCONF)
 493 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 494         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 495 $(am__aclocal_m4_deps):
 496
 497 target-config.h: stamp-h1
 498         @test -f $@ || rm -f stamp-h1
 499         @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 500
 501 stamp-h1: $(srcdir)/target-config.h.in $(top_builddir)/config.status
 502         @rm -f stamp-h1
 503         cd $(top_builddir) && $(SHELL) ./config.status target-config.h
 504 $(srcdir)/target-config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 505         ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 506         rm -f stamp-h1
 507         touch $@
 508
 509 distclean-hdr:
 510         -rm -f target-config.h stamp-h1
 511
 512 install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
 513         @$(NORMAL_INSTALL)
 514         @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
 515         list2=; for p in $$list; do \
 516           if test -f $$p; then \
 517             list2="$$list2 $$p"; \
 518           else :; fi; \
 519         done; \
 520         test -z "$$list2" || { \
 521           echo " $(MKDIR_P) '$(DESTDIR)$(toolexeclibdir)'"; \
 522           $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" || exit 1; \
 523           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \
 524           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \
 525         }
 526
 527 uninstall-toolexeclibLTLIBRARIES:
 528         @$(NORMAL_UNINSTALL)
 529         @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
 530         for p in $$list; do \
 531           $(am__strip_dir) \
 532           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
 533           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \
 534         done
 535
 536 clean-toolexeclibLTLIBRARIES:
 537         -test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
 538         @list='$(toolexeclib_LTLIBRARIES)'; \
 539         locs=`for p in $$list; do echo $$p; done | \
 540               sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
 541               sort -u`; \
 542         test -z "$$locs" || { \
 543           echo rm -f $${locs}; \
 544           rm -f $${locs}; \
 545         }
 546 rt/$(am__dirstamp):
 547         @$(MKDIR_P) rt
 548         @: > rt/$(am__dirstamp)
 549 rt/$(DEPDIR)/$(am__dirstamp):
 550         @$(MKDIR_P) rt/$(DEPDIR)
 551         @: > rt/$(DEPDIR)/$(am__dirstamp)
 552 rt/arithmetic.lo: rt/$(am__dirstamp) rt/$(DEPDIR)/$(am__dirstamp)
 553 rt/atomics.lo: rt/$(am__dirstamp) rt/$(DEPDIR)/$(am__dirstamp)
 554 rt/bitstring.lo: rt/$(am__dirstamp) rt/$(DEPDIR)/$(am__dirstamp)
 555 rt/fbarrier.lo: rt/$(am__dirstamp) rt/$(DEPDIR)/$(am__dirstamp)
 556 rt/fp16.lo: rt/$(am__dirstamp) rt/$(DEPDIR)/$(am__dirstamp)
 557 rt/misc.lo: rt/$(am__dirstamp) rt/$(DEPDIR)/$(am__dirstamp)
 558 rt/multimedia.lo: rt/$(am__dirstamp) rt/$(DEPDIR)/$(am__dirstamp)
 559 rt/queue.lo: rt/$(am__dirstamp) rt/$(DEPDIR)/$(am__dirstamp)
 560 rt/sat_arithmetic.lo: rt/$(am__dirstamp) rt/$(DEPDIR)/$(am__dirstamp)
 561 rt/segment.lo: rt/$(am__dirstamp) rt/$(DEPDIR)/$(am__dirstamp)
 562 rt/workitems.lo: rt/$(am__dirstamp) rt/$(DEPDIR)/$(am__dirstamp)
 563 rt/fibers.lo: rt/$(am__dirstamp) rt/$(DEPDIR)/$(am__dirstamp)
 564
 565 libhsail-rt.la: $(libhsail_rt_la_OBJECTS) $(libhsail_rt_la_DEPENDENCIES) $(EXTRA_libhsail_rt_la_DEPENDENCIES)
 566         $(AM_V_CCLD)$(libhsail_rt_la_LINK) -rpath $(toolexeclibdir) $(libhsail_rt_la_OBJECTS) $(libhsail_rt_la_LIBADD) $(LIBS)
 567
 568 mostlyclean-compile:
 569         -rm -f *.$(OBJEXT)
 570         -rm -f rt/*.$(OBJEXT)
 571         -rm -f rt/*.lo
 572
 573 distclean-compile:
 574         -rm -f *.tab.c
 575
 576 @AMDEP_TRUE@@am__include@ @am__quote@rt/$(DEPDIR)/arithmetic.Plo@am__quote@
 577 @AMDEP_TRUE@@am__include@ @am__quote@rt/$(DEPDIR)/atomics.Plo@am__quote@
 578 @AMDEP_TRUE@@am__include@ @am__quote@rt/$(DEPDIR)/bitstring.Plo@am__quote@
 579 @AMDEP_TRUE@@am__include@ @am__quote@rt/$(DEPDIR)/fbarrier.Plo@am__quote@
 580 @AMDEP_TRUE@@am__include@ @am__quote@rt/$(DEPDIR)/fibers.Plo@am__quote@
 581 @AMDEP_TRUE@@am__include@ @am__quote@rt/$(DEPDIR)/fp16.Plo@am__quote@
 582 @AMDEP_TRUE@@am__include@ @am__quote@rt/$(DEPDIR)/misc.Plo@am__quote@
 583 @AMDEP_TRUE@@am__include@ @am__quote@rt/$(DEPDIR)/multimedia.Plo@am__quote@
 584 @AMDEP_TRUE@@am__include@ @am__quote@rt/$(DEPDIR)/queue.Plo@am__quote@
 585 @AMDEP_TRUE@@am__include@ @am__quote@rt/$(DEPDIR)/sat_arithmetic.Plo@am__quote@
 586 @AMDEP_TRUE@@am__include@ @am__quote@rt/$(DEPDIR)/segment.Plo@am__quote@
 587 @AMDEP_TRUE@@am__include@ @am__quote@rt/$(DEPDIR)/workitems.Plo@am__quote@
 588
 589 .c.o:
 590 @am__fastdepCC_TRUE@    $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
 591 @am__fastdepCC_TRUE@    $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
 592 @am__fastdepCC_TRUE@    $(am__mv) $$depbase.Tpo $$depbase.Po
 593 @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 594 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 595 @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 596
 597 .c.obj:
 598 @am__fastdepCC_TRUE@    $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
 599 @am__fastdepCC_TRUE@    $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
 600 @am__fastdepCC_TRUE@    $(am__mv) $$depbase.Tpo $$depbase.Po
 601 @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 602 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 603 @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 604
 605 .c.lo:
 606 @am__fastdepCC_TRUE@    $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
 607 @am__fastdepCC_TRUE@    $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
 608 @am__fastdepCC_TRUE@    $(am__mv) $$depbase.Tpo $$depbase.Plo
 609 @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 610 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 611 @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
 612
 613 mostlyclean-libtool:
 614         -rm -f *.lo
 615
 616 clean-libtool:
 617         -rm -rf .libs _libs
 618         -rm -rf rt/.libs rt/_libs
 619
 620 distclean-libtool:
 621         -rm -f libtool config.lt
 622
 623 ID: $(am__tagged_files)
 624         $(am__define_uniq_tagged_files); mkid -fID $$unique
 625 tags: tags-am
 626 TAGS: tags
 627
 628 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 629         set x; \
 630         here=`pwd`; \
 631         $(am__define_uniq_tagged_files); \
 632         shift; \
 633         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 634           test -n "$$unique" || unique=$$empty_fix; \
 635           if test $$# -gt 0; then \
 636             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 637               "$$@" $$unique; \
 638           else \
 639             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 640               $$unique; \
 641           fi; \
 642         fi
 643 ctags: ctags-am
 644
 645 CTAGS: ctags
 646 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 647         $(am__define_uniq_tagged_files); \
 648         test -z "$(CTAGS_ARGS)$$unique" \
 649           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 650              $$unique
 651
 652 GTAGS:
 653         here=`$(am__cd) $(top_builddir) && pwd` \
 654           && $(am__cd) $(top_srcdir) \
 655           && gtags -i $(GTAGS_ARGS) "$$here"
 656 cscope: cscope.files
 657         test ! -s cscope.files \
 658           || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
 659 clean-cscope:
 660         -rm -f cscope.files
 661 cscope.files: clean-cscope cscopelist
 662 cscopelist: cscopelist-am
 663
 664 cscopelist-am: $(am__tagged_files)
 665         list='$(am__tagged_files)'; \
 666         case "$(srcdir)" in \
 667           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 668           *) sdir=$(subdir)/$(srcdir) ;; \
 669         esac; \
 670         for i in $$list; do \
 671           if test -f "$$i"; then \
 672             echo "$(subdir)/$$i"; \
 673           else \
 674             echo "$$sdir/$$i"; \
 675           fi; \
 676         done >> $(top_builddir)/cscope.files
 677
 678 distclean-tags:
 679         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 680         -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 681 check-am: all-am
 682 check: check-am
 683 all-am: Makefile $(LTLIBRARIES) target-config.h
 684 installdirs:
 685         for dir in "$(DESTDIR)$(toolexeclibdir)"; do \
 686           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 687         done
 688 install: install-am
 689 install-exec: install-exec-am
 690 install-data: install-data-am
 691 uninstall: uninstall-am
 692
 693 install-am: all-am
 694         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 695
 696 installcheck: installcheck-am
 697 install-strip:
 698         if test -z '$(STRIP)'; then \
 699           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 700             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 701               install; \
 702         else \
 703           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 704             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 705             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 706         fi
 707 mostlyclean-generic:
 708
 709 clean-generic:
 710
 711 distclean-generic:
 712         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 713         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 714         -rm -f rt/$(DEPDIR)/$(am__dirstamp)
 715         -rm -f rt/$(am__dirstamp)
 716
 717 maintainer-clean-generic:
 718         @echo "This command is intended for maintainers to use"
 719         @echo "it deletes files that may require special tools to rebuild."
 720 clean: clean-am
 721
 722 clean-am: clean-generic clean-libtool clean-toolexeclibLTLIBRARIES \
 723         mostlyclean-am
 724
 725 distclean: distclean-am
 726         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 727         -rm -rf rt/$(DEPDIR)
 728         -rm -f Makefile
 729 distclean-am: clean-am distclean-compile distclean-generic \
 730         distclean-hdr distclean-libtool distclean-tags
 731
 732 dvi: dvi-am
 733
 734 dvi-am:
 735
 736 html: html-am
 737
 738 html-am:
 739
 740 info: info-am
 741
 742 info-am:
 743
 744 install-data-am:
 745
 746 install-dvi: install-dvi-am
 747
 748 install-dvi-am:
 749
 750 install-exec-am: install-toolexeclibLTLIBRARIES
 751
 752 install-html: install-html-am
 753
 754 install-html-am:
 755
 756 install-info: install-info-am
 757
 758 install-info-am:
 759
 760 install-man:
 761
 762 install-pdf: install-pdf-am
 763
 764 install-pdf-am:
 765
 766 install-ps: install-ps-am
 767
 768 install-ps-am:
 769
 770 installcheck-am:
 771
 772 maintainer-clean: maintainer-clean-am
 773         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 774         -rm -rf $(top_srcdir)/autom4te.cache
 775         -rm -rf rt/$(DEPDIR)
 776         -rm -f Makefile
 777 maintainer-clean-am: distclean-am maintainer-clean-generic
 778
 779 mostlyclean: mostlyclean-am
 780
 781 mostlyclean-am: mostlyclean-compile mostlyclean-generic \
 782         mostlyclean-libtool
 783
 784 pdf: pdf-am
 785
 786 pdf-am:
 787
 788 ps: ps-am
 789
 790 ps-am:
 791
 792 uninstall-am: uninstall-toolexeclibLTLIBRARIES
 793
 794 .MAKE: all install-am install-strip
 795
 796 .PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \
 797         clean-cscope clean-generic clean-libtool \
 798         clean-toolexeclibLTLIBRARIES cscope cscopelist-am ctags \
 799         ctags-am distclean distclean-compile distclean-generic \
 800         distclean-hdr distclean-libtool distclean-tags dvi dvi-am html \
 801         html-am info info-am install install-am install-data \
 802         install-data-am install-dvi install-dvi-am install-exec \
 803         install-exec-am install-html install-html-am install-info \
 804         install-info-am install-man install-pdf install-pdf-am \
 805         install-ps install-ps-am install-strip \
 806         install-toolexeclibLTLIBRARIES installcheck installcheck-am \
 807         installdirs maintainer-clean maintainer-clean-generic \
 808         mostlyclean mostlyclean-compile mostlyclean-generic \
 809         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
 810         uninstall-am uninstall-toolexeclibLTLIBRARIES
 811
 812 .PRECIOUS: Makefile
 813
 814
 815 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 816 # Otherwise a system limit (for SysV at least) may be exceeded.
 817 .NOEXPORT: