Prepare v2024.10
[platform/kernel/u-boot.git] / lib / image-sparse.c
1 /*
2  * Copyright (c) 2009, Google Inc.
3  * All rights reserved.
4  *
5  * Copyright (c) 2009-2014, The Linux Foundation. All rights reserved.
6  * Portions Copyright 2014 Broadcom Corporation.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions are met:
10  *     * Redistributions of source code must retain the above copyright
11  *       notice, this list of conditions and the following disclaimer.
12  *     * Redistributions in binary form must reproduce the above copyright
13  *       notice, this list of conditions and the following disclaimer in the
14  *       documentation and/or other materials provided with the distribution.
15  *     * Neither the name of The Linux Foundation nor
16  *       the names of its contributors may be used to endorse or promote
17  *       products derived from this software without specific prior written
18  *       permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
23  * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
24  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
25  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
26  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
27  * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
28  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
29  * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
30  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31  *
32  * NOTE:
33  *   Although it is very similar, this license text is not identical
34  *   to the "BSD-3-Clause", therefore, DO NOT MODIFY THIS LICENSE TEXT!
35  */
36
37 #include <config.h>
38 #include <blk.h>
39 #include <image-sparse.h>
40 #include <div64.h>
41 #include <log.h>
42 #include <malloc.h>
43 #include <part.h>
44 #include <sparse_format.h>
45 #include <asm/cache.h>
46
47 #include <linux/math64.h>
48 #include <linux/err.h>
49
50 static void default_log(const char *ignored, char *response) {}
51
52 static lbaint_t write_sparse_chunk_raw(struct sparse_storage *info,
53                                        lbaint_t blk, lbaint_t blkcnt,
54                                        void *data,
55                                        char *response)
56 {
57         lbaint_t n = blkcnt, write_blks, blks = 0;
58         lbaint_t aligned_buf_blks = FASTBOOT_MAX_BLK_WRITE;
59         uint32_t *aligned_buf = NULL;
60
61         if (CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) {
62                 write_blks = info->write(info, blk, n, data);
63                 if (write_blks < n)
64                         goto write_fail;
65
66                 return write_blks;
67         }
68
69         aligned_buf = memalign(ARCH_DMA_MINALIGN, info->blksz * aligned_buf_blks);
70         if (!aligned_buf) {
71                 info->mssg("Malloc failed for: CHUNK_TYPE_RAW", response);
72                 return -ENOMEM;
73         }
74
75         while (blkcnt > 0) {
76                 n = min(aligned_buf_blks, blkcnt);
77                 memcpy(aligned_buf, data, n * info->blksz);
78
79                 /* write_blks might be > n due to NAND bad-blocks */
80                 write_blks = info->write(info, blk + blks, n, aligned_buf);
81                 if (write_blks < n) {
82                         free(aligned_buf);
83                         goto write_fail;
84                 }
85
86                 blks += write_blks;
87                 data += n * info->blksz;
88                 blkcnt -= n;
89         }
90
91         free(aligned_buf);
92         return blks;
93
94 write_fail:
95         if (IS_ERR_VALUE(write_blks)) {
96                 printf("%s: Write failed, block #" LBAFU " [" LBAFU "] (%lld)\n",
97                        __func__, blk + blks, n, (long long)write_blks);
98                 info->mssg("flash write failure", response);
99                 return write_blks;
100         }
101
102         /* write_blks < n */
103         printf("%s: Write failed, block #" LBAFU " [" LBAFU "]\n",
104                __func__, blk + blks, n);
105         info->mssg("flash write failure(incomplete)", response);
106         return -1;
107 }
108
109 int write_sparse_image(struct sparse_storage *info,
110                        const char *part_name, void *data, char *response)
111 {
112         lbaint_t blk;
113         lbaint_t blkcnt;
114         lbaint_t blks;
115         uint64_t bytes_written = 0;
116         unsigned int chunk;
117         unsigned int offset;
118         uint64_t chunk_data_sz;
119         uint32_t *fill_buf = NULL;
120         uint32_t fill_val;
121         sparse_header_t *sparse_header;
122         chunk_header_t *chunk_header;
123         uint32_t total_blocks = 0;
124         int fill_buf_num_blks;
125         int i;
126         int j;
127
128         fill_buf_num_blks = CONFIG_IMAGE_SPARSE_FILLBUF_SIZE / info->blksz;
129
130         /* Read and skip over sparse image header */
131         sparse_header = (sparse_header_t *)data;
132
133         data += sparse_header->file_hdr_sz;
134         if (sparse_header->file_hdr_sz > sizeof(sparse_header_t)) {
135                 /*
136                  * Skip the remaining bytes in a header that is longer than
137                  * we expected.
138                  */
139                 data += (sparse_header->file_hdr_sz - sizeof(sparse_header_t));
140         }
141
142         if (!info->mssg)
143                 info->mssg = default_log;
144
145         debug("=== Sparse Image Header ===\n");
146         debug("magic: 0x%x\n", sparse_header->magic);
147         debug("major_version: 0x%x\n", sparse_header->major_version);
148         debug("minor_version: 0x%x\n", sparse_header->minor_version);
149         debug("file_hdr_sz: %d\n", sparse_header->file_hdr_sz);
150         debug("chunk_hdr_sz: %d\n", sparse_header->chunk_hdr_sz);
151         debug("blk_sz: %d\n", sparse_header->blk_sz);
152         debug("total_blks: %d\n", sparse_header->total_blks);
153         debug("total_chunks: %d\n", sparse_header->total_chunks);
154
155         /*
156          * Verify that the sparse block size is a multiple of our
157          * storage backend block size
158          */
159         div_u64_rem(sparse_header->blk_sz, info->blksz, &offset);
160         if (offset) {
161                 printf("%s: Sparse image block size issue [%u]\n",
162                        __func__, sparse_header->blk_sz);
163                 info->mssg("sparse image block size issue", response);
164                 return -1;
165         }
166
167         puts("Flashing Sparse Image\n");
168
169         /* Start processing chunks */
170         blk = info->start;
171         for (chunk = 0; chunk < sparse_header->total_chunks; chunk++) {
172                 /* Read and skip over chunk header */
173                 chunk_header = (chunk_header_t *)data;
174                 data += sizeof(chunk_header_t);
175
176                 if (chunk_header->chunk_type != CHUNK_TYPE_RAW) {
177                         debug("=== Chunk Header ===\n");
178                         debug("chunk_type: 0x%x\n", chunk_header->chunk_type);
179                         debug("chunk_data_sz: 0x%x\n", chunk_header->chunk_sz);
180                         debug("total_size: 0x%x\n", chunk_header->total_sz);
181                 }
182
183                 if (sparse_header->chunk_hdr_sz > sizeof(chunk_header_t)) {
184                         /*
185                          * Skip the remaining bytes in a header that is longer
186                          * than we expected.
187                          */
188                         data += (sparse_header->chunk_hdr_sz -
189                                  sizeof(chunk_header_t));
190                 }
191
192                 chunk_data_sz = ((u64)sparse_header->blk_sz) * chunk_header->chunk_sz;
193                 blkcnt = DIV_ROUND_UP_ULL(chunk_data_sz, info->blksz);
194                 switch (chunk_header->chunk_type) {
195                 case CHUNK_TYPE_RAW:
196                         if (chunk_header->total_sz !=
197                             (sparse_header->chunk_hdr_sz + chunk_data_sz)) {
198                                 info->mssg("Bogus chunk size for chunk type Raw",
199                                            response);
200                                 return -1;
201                         }
202
203                         if (blk + blkcnt > info->start + info->size) {
204                                 printf(
205                                     "%s: Request would exceed partition size!\n",
206                                     __func__);
207                                 info->mssg("Request would exceed partition size!",
208                                            response);
209                                 return -1;
210                         }
211
212                         blks = write_sparse_chunk_raw(info, blk, blkcnt,
213                                                       data, response);
214                         if (IS_ERR_VALUE(blks))
215                                 return -1;
216
217                         blk += blks;
218                         bytes_written += ((u64)blkcnt) * info->blksz;
219                         total_blocks += chunk_header->chunk_sz;
220                         data += chunk_data_sz;
221                         break;
222
223                 case CHUNK_TYPE_FILL:
224                         if (chunk_header->total_sz !=
225                             (sparse_header->chunk_hdr_sz + sizeof(uint32_t))) {
226                                 info->mssg("Bogus chunk size for chunk type FILL", response);
227                                 return -1;
228                         }
229
230                         fill_buf = (uint32_t *)
231                                    memalign(ARCH_DMA_MINALIGN,
232                                             ROUNDUP(
233                                                 info->blksz * fill_buf_num_blks,
234                                                 ARCH_DMA_MINALIGN));
235                         if (!fill_buf) {
236                                 info->mssg("Malloc failed for: CHUNK_TYPE_FILL",
237                                            response);
238                                 return -1;
239                         }
240
241                         fill_val = *(uint32_t *)data;
242                         data = (char *)data + sizeof(uint32_t);
243
244                         for (i = 0;
245                              i < (info->blksz * fill_buf_num_blks /
246                                   sizeof(fill_val));
247                              i++)
248                                 fill_buf[i] = fill_val;
249
250                         if (blk + blkcnt > info->start + info->size) {
251                                 printf(
252                                     "%s: Request would exceed partition size!\n",
253                                     __func__);
254                                 info->mssg("Request would exceed partition size!",
255                                            response);
256                                 return -1;
257                         }
258
259                         for (i = 0; i < blkcnt;) {
260                                 j = blkcnt - i;
261                                 if (j > fill_buf_num_blks)
262                                         j = fill_buf_num_blks;
263                                 blks = info->write(info, blk, j, fill_buf);
264                                 /* blks might be > j (eg. NAND bad-blocks) */
265                                 if (blks < j) {
266                                         printf("%s: %s " LBAFU " [%d]\n",
267                                                __func__,
268                                                "Write failed, block #",
269                                                blk, j);
270                                         info->mssg("flash write failure",
271                                                    response);
272                                         free(fill_buf);
273                                         return -1;
274                                 }
275                                 blk += blks;
276                                 i += j;
277                         }
278                         bytes_written += ((u64)blkcnt) * info->blksz;
279                         total_blocks += DIV_ROUND_UP_ULL(chunk_data_sz,
280                                                          sparse_header->blk_sz);
281                         free(fill_buf);
282                         break;
283
284                 case CHUNK_TYPE_DONT_CARE:
285                         blk += info->reserve(info, blk, blkcnt);
286                         total_blocks += chunk_header->chunk_sz;
287                         break;
288
289                 case CHUNK_TYPE_CRC32:
290                         if (chunk_header->total_sz !=
291                             sparse_header->chunk_hdr_sz + sizeof(uint32_t)) {
292                                 info->mssg("Bogus chunk size for chunk type CRC32",
293                                            response);
294                                 return -1;
295                         }
296                         total_blocks += chunk_header->chunk_sz;
297                         data += chunk_data_sz;
298                         break;
299
300                 default:
301                         printf("%s: Unknown chunk type: %x\n", __func__,
302                                chunk_header->chunk_type);
303                         info->mssg("Unknown chunk type", response);
304                         return -1;
305                 }
306         }
307
308         debug("Wrote %d blocks, expected to write %d blocks\n",
309               total_blocks, sparse_header->total_blks);
310         printf("........ wrote %llu bytes to '%s'\n", bytes_written, part_name);
311
312         if (total_blocks != sparse_header->total_blks) {
313                 info->mssg("sparse image write failure", response);
314                 return -1;
315         }
316
317         return 0;
318 }