Merge branch 'for-3.8/drivers' of git://git.kernel.dk/linux-block
[platform/adaptation/renesas_rcar/renesas_kernel.git] / kernel / watchdog.c
1 /*
2  * Detect hard and soft lockups on a system
3  *
4  * started by Don Zickus, Copyright (C) 2010 Red Hat, Inc.
5  *
6  * Note: Most of this code is borrowed heavily from the original softlockup
7  * detector, so thanks to Ingo for the initial implementation.
8  * Some chunks also taken from the old x86-specific nmi watchdog code, thanks
9  * to those contributors as well.
10  */
11
12 #define pr_fmt(fmt) "NMI watchdog: " fmt
13
14 #include <linux/mm.h>
15 #include <linux/cpu.h>
16 #include <linux/nmi.h>
17 #include <linux/init.h>
18 #include <linux/delay.h>
19 #include <linux/freezer.h>
20 #include <linux/kthread.h>
21 #include <linux/lockdep.h>
22 #include <linux/notifier.h>
23 #include <linux/module.h>
24 #include <linux/sysctl.h>
25 #include <linux/smpboot.h>
26
27 #include <asm/irq_regs.h>
28 #include <linux/kvm_para.h>
29 #include <linux/perf_event.h>
30
31 int watchdog_enabled = 1;
32 int __read_mostly watchdog_thresh = 10;
33 static int __read_mostly watchdog_disabled;
34
35 static DEFINE_PER_CPU(unsigned long, watchdog_touch_ts);
36 static DEFINE_PER_CPU(struct task_struct *, softlockup_watchdog);
37 static DEFINE_PER_CPU(struct hrtimer, watchdog_hrtimer);
38 static DEFINE_PER_CPU(bool, softlockup_touch_sync);
39 static DEFINE_PER_CPU(bool, soft_watchdog_warn);
40 static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts);
41 static DEFINE_PER_CPU(unsigned long, soft_lockup_hrtimer_cnt);
42 #ifdef CONFIG_HARDLOCKUP_DETECTOR
43 static DEFINE_PER_CPU(bool, hard_watchdog_warn);
44 static DEFINE_PER_CPU(bool, watchdog_nmi_touch);
45 static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts_saved);
46 static DEFINE_PER_CPU(struct perf_event *, watchdog_ev);
47 #endif
48
49 /* boot commands */
50 /*
51  * Should we panic when a soft-lockup or hard-lockup occurs:
52  */
53 #ifdef CONFIG_HARDLOCKUP_DETECTOR
54 static int hardlockup_panic =
55                         CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE;
56
57 static int __init hardlockup_panic_setup(char *str)
58 {
59         if (!strncmp(str, "panic", 5))
60                 hardlockup_panic = 1;
61         else if (!strncmp(str, "nopanic", 7))
62                 hardlockup_panic = 0;
63         else if (!strncmp(str, "0", 1))
64                 watchdog_enabled = 0;
65         return 1;
66 }
67 __setup("nmi_watchdog=", hardlockup_panic_setup);
68 #endif
69
70 unsigned int __read_mostly softlockup_panic =
71                         CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE;
72
73 static int __init softlockup_panic_setup(char *str)
74 {
75         softlockup_panic = simple_strtoul(str, NULL, 0);
76
77         return 1;
78 }
79 __setup("softlockup_panic=", softlockup_panic_setup);
80
81 static int __init nowatchdog_setup(char *str)
82 {
83         watchdog_enabled = 0;
84         return 1;
85 }
86 __setup("nowatchdog", nowatchdog_setup);
87
88 /* deprecated */
89 static int __init nosoftlockup_setup(char *str)
90 {
91         watchdog_enabled = 0;
92         return 1;
93 }
94 __setup("nosoftlockup", nosoftlockup_setup);
95 /*  */
96
97 /*
98  * Hard-lockup warnings should be triggered after just a few seconds. Soft-
99  * lockups can have false positives under extreme conditions. So we generally
100  * want a higher threshold for soft lockups than for hard lockups. So we couple
101  * the thresholds with a factor: we make the soft threshold twice the amount of
102  * time the hard threshold is.
103  */
104 static int get_softlockup_thresh(void)
105 {
106         return watchdog_thresh * 2;
107 }
108
109 /*
110  * Returns seconds, approximately.  We don't need nanosecond
111  * resolution, and we don't need to waste time with a big divide when
112  * 2^30ns == 1.074s.
113  */
114 static unsigned long get_timestamp(int this_cpu)
115 {
116         return cpu_clock(this_cpu) >> 30LL;  /* 2^30 ~= 10^9 */
117 }
118
119 static u64 get_sample_period(void)
120 {
121         /*
122          * convert watchdog_thresh from seconds to ns
123          * the divide by 5 is to give hrtimer several chances (two
124          * or three with the current relation between the soft
125          * and hard thresholds) to increment before the
126          * hardlockup detector generates a warning
127          */
128         return get_softlockup_thresh() * ((u64)NSEC_PER_SEC / 5);
129 }
130
131 /* Commands for resetting the watchdog */
132 static void __touch_watchdog(void)
133 {
134         int this_cpu = smp_processor_id();
135
136         __this_cpu_write(watchdog_touch_ts, get_timestamp(this_cpu));
137 }
138
139 void touch_softlockup_watchdog(void)
140 {
141         __this_cpu_write(watchdog_touch_ts, 0);
142 }
143 EXPORT_SYMBOL(touch_softlockup_watchdog);
144
145 void touch_all_softlockup_watchdogs(void)
146 {
147         int cpu;
148
149         /*
150          * this is done lockless
151          * do we care if a 0 races with a timestamp?
152          * all it means is the softlock check starts one cycle later
153          */
154         for_each_online_cpu(cpu)
155                 per_cpu(watchdog_touch_ts, cpu) = 0;
156 }
157
158 #ifdef CONFIG_HARDLOCKUP_DETECTOR
159 void touch_nmi_watchdog(void)
160 {
161         if (watchdog_enabled) {
162                 unsigned cpu;
163
164                 for_each_present_cpu(cpu) {
165                         if (per_cpu(watchdog_nmi_touch, cpu) != true)
166                                 per_cpu(watchdog_nmi_touch, cpu) = true;
167                 }
168         }
169         touch_softlockup_watchdog();
170 }
171 EXPORT_SYMBOL(touch_nmi_watchdog);
172
173 #endif
174
175 void touch_softlockup_watchdog_sync(void)
176 {
177         __raw_get_cpu_var(softlockup_touch_sync) = true;
178         __raw_get_cpu_var(watchdog_touch_ts) = 0;
179 }
180
181 #ifdef CONFIG_HARDLOCKUP_DETECTOR
182 /* watchdog detector functions */
183 static int is_hardlockup(void)
184 {
185         unsigned long hrint = __this_cpu_read(hrtimer_interrupts);
186
187         if (__this_cpu_read(hrtimer_interrupts_saved) == hrint)
188                 return 1;
189
190         __this_cpu_write(hrtimer_interrupts_saved, hrint);
191         return 0;
192 }
193 #endif
194
195 static int is_softlockup(unsigned long touch_ts)
196 {
197         unsigned long now = get_timestamp(smp_processor_id());
198
199         /* Warn about unreasonable delays: */
200         if (time_after(now, touch_ts + get_softlockup_thresh()))
201                 return now - touch_ts;
202
203         return 0;
204 }
205
206 #ifdef CONFIG_HARDLOCKUP_DETECTOR
207
208 static struct perf_event_attr wd_hw_attr = {
209         .type           = PERF_TYPE_HARDWARE,
210         .config         = PERF_COUNT_HW_CPU_CYCLES,
211         .size           = sizeof(struct perf_event_attr),
212         .pinned         = 1,
213         .disabled       = 1,
214 };
215
216 /* Callback function for perf event subsystem */
217 static void watchdog_overflow_callback(struct perf_event *event,
218                  struct perf_sample_data *data,
219                  struct pt_regs *regs)
220 {
221         /* Ensure the watchdog never gets throttled */
222         event->hw.interrupts = 0;
223
224         if (__this_cpu_read(watchdog_nmi_touch) == true) {
225                 __this_cpu_write(watchdog_nmi_touch, false);
226                 return;
227         }
228
229         /* check for a hardlockup
230          * This is done by making sure our timer interrupt
231          * is incrementing.  The timer interrupt should have
232          * fired multiple times before we overflow'd.  If it hasn't
233          * then this is a good indication the cpu is stuck
234          */
235         if (is_hardlockup()) {
236                 int this_cpu = smp_processor_id();
237
238                 /* only print hardlockups once */
239                 if (__this_cpu_read(hard_watchdog_warn) == true)
240                         return;
241
242                 if (hardlockup_panic)
243                         panic("Watchdog detected hard LOCKUP on cpu %d", this_cpu);
244                 else
245                         WARN(1, "Watchdog detected hard LOCKUP on cpu %d", this_cpu);
246
247                 __this_cpu_write(hard_watchdog_warn, true);
248                 return;
249         }
250
251         __this_cpu_write(hard_watchdog_warn, false);
252         return;
253 }
254 #endif /* CONFIG_HARDLOCKUP_DETECTOR */
255
256 static void watchdog_interrupt_count(void)
257 {
258         __this_cpu_inc(hrtimer_interrupts);
259 }
260
261 static int watchdog_nmi_enable(unsigned int cpu);
262 static void watchdog_nmi_disable(unsigned int cpu);
263
264 /* watchdog kicker functions */
265 static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
266 {
267         unsigned long touch_ts = __this_cpu_read(watchdog_touch_ts);
268         struct pt_regs *regs = get_irq_regs();
269         int duration;
270
271         /* kick the hardlockup detector */
272         watchdog_interrupt_count();
273
274         /* kick the softlockup detector */
275         wake_up_process(__this_cpu_read(softlockup_watchdog));
276
277         /* .. and repeat */
278         hrtimer_forward_now(hrtimer, ns_to_ktime(get_sample_period()));
279
280         if (touch_ts == 0) {
281                 if (unlikely(__this_cpu_read(softlockup_touch_sync))) {
282                         /*
283                          * If the time stamp was touched atomically
284                          * make sure the scheduler tick is up to date.
285                          */
286                         __this_cpu_write(softlockup_touch_sync, false);
287                         sched_clock_tick();
288                 }
289
290                 /* Clear the guest paused flag on watchdog reset */
291                 kvm_check_and_clear_guest_paused();
292                 __touch_watchdog();
293                 return HRTIMER_RESTART;
294         }
295
296         /* check for a softlockup
297          * This is done by making sure a high priority task is
298          * being scheduled.  The task touches the watchdog to
299          * indicate it is getting cpu time.  If it hasn't then
300          * this is a good indication some task is hogging the cpu
301          */
302         duration = is_softlockup(touch_ts);
303         if (unlikely(duration)) {
304                 /*
305                  * If a virtual machine is stopped by the host it can look to
306                  * the watchdog like a soft lockup, check to see if the host
307                  * stopped the vm before we issue the warning
308                  */
309                 if (kvm_check_and_clear_guest_paused())
310                         return HRTIMER_RESTART;
311
312                 /* only warn once */
313                 if (__this_cpu_read(soft_watchdog_warn) == true)
314                         return HRTIMER_RESTART;
315
316                 printk(KERN_EMERG "BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n",
317                         smp_processor_id(), duration,
318                         current->comm, task_pid_nr(current));
319                 print_modules();
320                 print_irqtrace_events(current);
321                 if (regs)
322                         show_regs(regs);
323                 else
324                         dump_stack();
325
326                 if (softlockup_panic)
327                         panic("softlockup: hung tasks");
328                 __this_cpu_write(soft_watchdog_warn, true);
329         } else
330                 __this_cpu_write(soft_watchdog_warn, false);
331
332         return HRTIMER_RESTART;
333 }
334
335 static void watchdog_set_prio(unsigned int policy, unsigned int prio)
336 {
337         struct sched_param param = { .sched_priority = prio };
338
339         sched_setscheduler(current, policy, &param);
340 }
341
342 static void watchdog_enable(unsigned int cpu)
343 {
344         struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
345
346         if (!watchdog_enabled) {
347                 kthread_park(current);
348                 return;
349         }
350
351         /* Enable the perf event */
352         watchdog_nmi_enable(cpu);
353
354         /* kick off the timer for the hardlockup detector */
355         hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
356         hrtimer->function = watchdog_timer_fn;
357
358         /* done here because hrtimer_start can only pin to smp_processor_id() */
359         hrtimer_start(hrtimer, ns_to_ktime(get_sample_period()),
360                       HRTIMER_MODE_REL_PINNED);
361
362         /* initialize timestamp */
363         watchdog_set_prio(SCHED_FIFO, MAX_RT_PRIO - 1);
364         __touch_watchdog();
365 }
366
367 static void watchdog_disable(unsigned int cpu)
368 {
369         struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
370
371         if (!watchdog_enabled)
372                 return;
373
374         watchdog_set_prio(SCHED_NORMAL, 0);
375         hrtimer_cancel(hrtimer);
376         /* disable the perf event */
377         watchdog_nmi_disable(cpu);
378 }
379
380 static int watchdog_should_run(unsigned int cpu)
381 {
382         return __this_cpu_read(hrtimer_interrupts) !=
383                 __this_cpu_read(soft_lockup_hrtimer_cnt);
384 }
385
386 /*
387  * The watchdog thread function - touches the timestamp.
388  *
389  * It only runs once every get_sample_period() seconds (4 seconds by
390  * default) to reset the softlockup timestamp. If this gets delayed
391  * for more than 2*watchdog_thresh seconds then the debug-printout
392  * triggers in watchdog_timer_fn().
393  */
394 static void watchdog(unsigned int cpu)
395 {
396         __this_cpu_write(soft_lockup_hrtimer_cnt,
397                          __this_cpu_read(hrtimer_interrupts));
398         __touch_watchdog();
399 }
400
401 #ifdef CONFIG_HARDLOCKUP_DETECTOR
402 /*
403  * People like the simple clean cpu node info on boot.
404  * Reduce the watchdog noise by only printing messages
405  * that are different from what cpu0 displayed.
406  */
407 static unsigned long cpu0_err;
408
409 static int watchdog_nmi_enable(unsigned int cpu)
410 {
411         struct perf_event_attr *wd_attr;
412         struct perf_event *event = per_cpu(watchdog_ev, cpu);
413
414         /* is it already setup and enabled? */
415         if (event && event->state > PERF_EVENT_STATE_OFF)
416                 goto out;
417
418         /* it is setup but not enabled */
419         if (event != NULL)
420                 goto out_enable;
421
422         wd_attr = &wd_hw_attr;
423         wd_attr->sample_period = hw_nmi_get_sample_period(watchdog_thresh);
424
425         /* Try to register using hardware perf events */
426         event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);
427
428         /* save cpu0 error for future comparision */
429         if (cpu == 0 && IS_ERR(event))
430                 cpu0_err = PTR_ERR(event);
431
432         if (!IS_ERR(event)) {
433                 /* only print for cpu0 or different than cpu0 */
434                 if (cpu == 0 || cpu0_err)
435                         pr_info("enabled on all CPUs, permanently consumes one hw-PMU counter.\n");
436                 goto out_save;
437         }
438
439         /* skip displaying the same error again */
440         if (cpu > 0 && (PTR_ERR(event) == cpu0_err))
441                 return PTR_ERR(event);
442
443         /* vary the KERN level based on the returned errno */
444         if (PTR_ERR(event) == -EOPNOTSUPP)
445                 pr_info("disabled (cpu%i): not supported (no LAPIC?)\n", cpu);
446         else if (PTR_ERR(event) == -ENOENT)
447                 pr_warning("disabled (cpu%i): hardware events not enabled\n",
448                          cpu);
449         else
450                 pr_err("disabled (cpu%i): unable to create perf event: %ld\n",
451                         cpu, PTR_ERR(event));
452         return PTR_ERR(event);
453
454         /* success path */
455 out_save:
456         per_cpu(watchdog_ev, cpu) = event;
457 out_enable:
458         perf_event_enable(per_cpu(watchdog_ev, cpu));
459 out:
460         return 0;
461 }
462
463 static void watchdog_nmi_disable(unsigned int cpu)
464 {
465         struct perf_event *event = per_cpu(watchdog_ev, cpu);
466
467         if (event) {
468                 perf_event_disable(event);
469                 per_cpu(watchdog_ev, cpu) = NULL;
470
471                 /* should be in cleanup, but blocks oprofile */
472                 perf_event_release_kernel(event);
473         }
474         return;
475 }
476 #else
477 static int watchdog_nmi_enable(unsigned int cpu) { return 0; }
478 static void watchdog_nmi_disable(unsigned int cpu) { return; }
479 #endif /* CONFIG_HARDLOCKUP_DETECTOR */
480
481 /* prepare/enable/disable routines */
482 /* sysctl functions */
483 #ifdef CONFIG_SYSCTL
484 static void watchdog_enable_all_cpus(void)
485 {
486         unsigned int cpu;
487
488         if (watchdog_disabled) {
489                 watchdog_disabled = 0;
490                 for_each_online_cpu(cpu)
491                         kthread_unpark(per_cpu(softlockup_watchdog, cpu));
492         }
493 }
494
495 static void watchdog_disable_all_cpus(void)
496 {
497         unsigned int cpu;
498
499         if (!watchdog_disabled) {
500                 watchdog_disabled = 1;
501                 for_each_online_cpu(cpu)
502                         kthread_park(per_cpu(softlockup_watchdog, cpu));
503         }
504 }
505
506 /*
507  * proc handler for /proc/sys/kernel/nmi_watchdog,watchdog_thresh
508  */
509
510 int proc_dowatchdog(struct ctl_table *table, int write,
511                     void __user *buffer, size_t *lenp, loff_t *ppos)
512 {
513         int ret;
514
515         if (watchdog_disabled < 0)
516                 return -ENODEV;
517
518         ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
519         if (ret || !write)
520                 return ret;
521
522         if (watchdog_enabled && watchdog_thresh)
523                 watchdog_enable_all_cpus();
524         else
525                 watchdog_disable_all_cpus();
526
527         return ret;
528 }
529 #endif /* CONFIG_SYSCTL */
530
531 static struct smp_hotplug_thread watchdog_threads = {
532         .store                  = &softlockup_watchdog,
533         .thread_should_run      = watchdog_should_run,
534         .thread_fn              = watchdog,
535         .thread_comm            = "watchdog/%u",
536         .setup                  = watchdog_enable,
537         .park                   = watchdog_disable,
538         .unpark                 = watchdog_enable,
539 };
540
541 void __init lockup_detector_init(void)
542 {
543         if (smpboot_register_percpu_thread(&watchdog_threads)) {
544                 pr_err("Failed to create watchdog threads, disabled\n");
545                 watchdog_disabled = -ENODEV;
546         }
547 }