2 * Read-Copy Update mechanism for mutual exclusion
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, you can access it online at
16 * http://www.gnu.org/licenses/gpl-2.0.html.
18 * Copyright IBM Corporation, 2001
20 * Authors: Dipankar Sarma <dipankar@in.ibm.com>
21 * Manfred Spraul <manfred@colorfullife.com>
23 * Based on the original work by Paul McKenney <paulmck@us.ibm.com>
24 * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
26 * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
27 * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
29 * For detailed explanation of Read-Copy Update mechanism see -
30 * http://lse.sourceforge.net/locking/rcupdate.html
33 #include <linux/types.h>
34 #include <linux/kernel.h>
35 #include <linux/init.h>
36 #include <linux/spinlock.h>
37 #include <linux/smp.h>
38 #include <linux/interrupt.h>
39 #include <linux/sched/signal.h>
40 #include <linux/sched/debug.h>
41 #include <linux/atomic.h>
42 #include <linux/bitops.h>
43 #include <linux/percpu.h>
44 #include <linux/notifier.h>
45 #include <linux/cpu.h>
46 #include <linux/mutex.h>
47 #include <linux/export.h>
48 #include <linux/hardirq.h>
49 #include <linux/delay.h>
50 #include <linux/moduleparam.h>
51 #include <linux/kthread.h>
52 #include <linux/tick.h>
53 #include <linux/rcupdate_wait.h>
54 #include <linux/sched/isolation.h>
56 #define CREATE_TRACE_POINTS
60 #ifdef MODULE_PARAM_PREFIX
61 #undef MODULE_PARAM_PREFIX
63 #define MODULE_PARAM_PREFIX "rcupdate."
65 #ifndef CONFIG_TINY_RCU
66 extern int rcu_expedited; /* from sysctl */
67 module_param(rcu_expedited, int, 0);
68 extern int rcu_normal; /* from sysctl */
69 module_param(rcu_normal, int, 0);
70 static int rcu_normal_after_boot;
71 module_param(rcu_normal_after_boot, int, 0);
72 #endif /* #ifndef CONFIG_TINY_RCU */
74 #ifdef CONFIG_DEBUG_LOCK_ALLOC
76 * rcu_read_lock_sched_held() - might we be in RCU-sched read-side critical section?
78 * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an
79 * RCU-sched read-side critical section. In absence of
80 * CONFIG_DEBUG_LOCK_ALLOC, this assumes we are in an RCU-sched read-side
81 * critical section unless it can prove otherwise. Note that disabling
82 * of preemption (including disabling irqs) counts as an RCU-sched
83 * read-side critical section. This is useful for debug checks in functions
84 * that required that they be called within an RCU-sched read-side
87 * Check debug_lockdep_rcu_enabled() to prevent false positives during boot
88 * and while lockdep is disabled.
90 * Note that if the CPU is in the idle loop from an RCU point of
91 * view (ie: that we are in the section between rcu_idle_enter() and
92 * rcu_idle_exit()) then rcu_read_lock_held() returns false even if the CPU
93 * did an rcu_read_lock(). The reason for this is that RCU ignores CPUs
94 * that are in such a section, considering these as in extended quiescent
95 * state, so such a CPU is effectively never in an RCU read-side critical
96 * section regardless of what RCU primitives it invokes. This state of
97 * affairs is required --- we need to keep an RCU-free window in idle
98 * where the CPU may possibly enter into low power mode. This way we can
99 * notice an extended quiescent state to other CPUs that started a grace
100 * period. Otherwise we would delay any grace period as long as we run in
103 * Similarly, we avoid claiming an SRCU read lock held if the current
106 int rcu_read_lock_sched_held(void)
108 int lockdep_opinion = 0;
110 if (!debug_lockdep_rcu_enabled())
112 if (!rcu_is_watching())
114 if (!rcu_lockdep_current_cpu_online())
117 lockdep_opinion = lock_is_held(&rcu_sched_lock_map);
118 return lockdep_opinion || !preemptible();
120 EXPORT_SYMBOL(rcu_read_lock_sched_held);
123 #ifndef CONFIG_TINY_RCU
126 * Should expedited grace-period primitives always fall back to their
127 * non-expedited counterparts? Intended for use within RCU. Note
128 * that if the user specifies both rcu_expedited and rcu_normal, then
129 * rcu_normal wins. (Except during the time period during boot from
130 * when the first task is spawned until the rcu_set_runtime_mode()
131 * core_initcall() is invoked, at which point everything is expedited.)
133 bool rcu_gp_is_normal(void)
135 return READ_ONCE(rcu_normal) &&
136 rcu_scheduler_active != RCU_SCHEDULER_INIT;
138 EXPORT_SYMBOL_GPL(rcu_gp_is_normal);
140 static atomic_t rcu_expedited_nesting = ATOMIC_INIT(1);
143 * Should normal grace-period primitives be expedited? Intended for
144 * use within RCU. Note that this function takes the rcu_expedited
145 * sysfs/boot variable and rcu_scheduler_active into account as well
146 * as the rcu_expedite_gp() nesting. So looping on rcu_unexpedite_gp()
147 * until rcu_gp_is_expedited() returns false is a -really- bad idea.
149 bool rcu_gp_is_expedited(void)
151 return rcu_expedited || atomic_read(&rcu_expedited_nesting) ||
152 rcu_scheduler_active == RCU_SCHEDULER_INIT;
154 EXPORT_SYMBOL_GPL(rcu_gp_is_expedited);
157 * rcu_expedite_gp - Expedite future RCU grace periods
159 * After a call to this function, future calls to synchronize_rcu() and
160 * friends act as the corresponding synchronize_rcu_expedited() function
161 * had instead been called.
163 void rcu_expedite_gp(void)
165 atomic_inc(&rcu_expedited_nesting);
167 EXPORT_SYMBOL_GPL(rcu_expedite_gp);
170 * rcu_unexpedite_gp - Cancel prior rcu_expedite_gp() invocation
172 * Undo a prior call to rcu_expedite_gp(). If all prior calls to
173 * rcu_expedite_gp() are undone by a subsequent call to rcu_unexpedite_gp(),
174 * and if the rcu_expedited sysfs/boot parameter is not set, then all
175 * subsequent calls to synchronize_rcu() and friends will return to
176 * their normal non-expedited behavior.
178 void rcu_unexpedite_gp(void)
180 atomic_dec(&rcu_expedited_nesting);
182 EXPORT_SYMBOL_GPL(rcu_unexpedite_gp);
185 * Inform RCU of the end of the in-kernel boot sequence.
187 void rcu_end_inkernel_boot(void)
190 if (rcu_normal_after_boot)
191 WRITE_ONCE(rcu_normal, 1);
194 #endif /* #ifndef CONFIG_TINY_RCU */
197 * Test each non-SRCU synchronous grace-period wait API. This is
198 * useful just after a change in mode for these primitives, and
201 void rcu_test_sync_prims(void)
203 if (!IS_ENABLED(CONFIG_PROVE_RCU))
206 synchronize_rcu_bh();
208 synchronize_rcu_expedited();
209 synchronize_rcu_bh_expedited();
210 synchronize_sched_expedited();
213 #if !defined(CONFIG_TINY_RCU) || defined(CONFIG_SRCU)
216 * Switch to run-time mode once RCU has fully initialized.
218 static int __init rcu_set_runtime_mode(void)
220 rcu_test_sync_prims();
221 rcu_scheduler_active = RCU_SCHEDULER_RUNNING;
222 rcu_test_sync_prims();
225 core_initcall(rcu_set_runtime_mode);
227 #endif /* #if !defined(CONFIG_TINY_RCU) || defined(CONFIG_SRCU) */
229 #ifdef CONFIG_DEBUG_LOCK_ALLOC
230 static struct lock_class_key rcu_lock_key;
231 struct lockdep_map rcu_lock_map =
232 STATIC_LOCKDEP_MAP_INIT("rcu_read_lock", &rcu_lock_key);
233 EXPORT_SYMBOL_GPL(rcu_lock_map);
235 static struct lock_class_key rcu_bh_lock_key;
236 struct lockdep_map rcu_bh_lock_map =
237 STATIC_LOCKDEP_MAP_INIT("rcu_read_lock_bh", &rcu_bh_lock_key);
238 EXPORT_SYMBOL_GPL(rcu_bh_lock_map);
240 static struct lock_class_key rcu_sched_lock_key;
241 struct lockdep_map rcu_sched_lock_map =
242 STATIC_LOCKDEP_MAP_INIT("rcu_read_lock_sched", &rcu_sched_lock_key);
243 EXPORT_SYMBOL_GPL(rcu_sched_lock_map);
245 static struct lock_class_key rcu_callback_key;
246 struct lockdep_map rcu_callback_map =
247 STATIC_LOCKDEP_MAP_INIT("rcu_callback", &rcu_callback_key);
248 EXPORT_SYMBOL_GPL(rcu_callback_map);
250 int notrace debug_lockdep_rcu_enabled(void)
252 return rcu_scheduler_active != RCU_SCHEDULER_INACTIVE && debug_locks &&
253 current->lockdep_recursion == 0;
255 EXPORT_SYMBOL_GPL(debug_lockdep_rcu_enabled);
258 * rcu_read_lock_held() - might we be in RCU read-side critical section?
260 * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an RCU
261 * read-side critical section. In absence of CONFIG_DEBUG_LOCK_ALLOC,
262 * this assumes we are in an RCU read-side critical section unless it can
263 * prove otherwise. This is useful for debug checks in functions that
264 * require that they be called within an RCU read-side critical section.
266 * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot
267 * and while lockdep is disabled.
269 * Note that rcu_read_lock() and the matching rcu_read_unlock() must
270 * occur in the same context, for example, it is illegal to invoke
271 * rcu_read_unlock() in process context if the matching rcu_read_lock()
272 * was invoked from within an irq handler.
274 * Note that rcu_read_lock() is disallowed if the CPU is either idle or
275 * offline from an RCU perspective, so check for those as well.
277 int rcu_read_lock_held(void)
279 if (!debug_lockdep_rcu_enabled())
281 if (!rcu_is_watching())
283 if (!rcu_lockdep_current_cpu_online())
285 return lock_is_held(&rcu_lock_map);
287 EXPORT_SYMBOL_GPL(rcu_read_lock_held);
290 * rcu_read_lock_bh_held() - might we be in RCU-bh read-side critical section?
292 * Check for bottom half being disabled, which covers both the
293 * CONFIG_PROVE_RCU and not cases. Note that if someone uses
294 * rcu_read_lock_bh(), but then later enables BH, lockdep (if enabled)
295 * will show the situation. This is useful for debug checks in functions
296 * that require that they be called within an RCU read-side critical
299 * Check debug_lockdep_rcu_enabled() to prevent false positives during boot.
301 * Note that rcu_read_lock() is disallowed if the CPU is either idle or
302 * offline from an RCU perspective, so check for those as well.
304 int rcu_read_lock_bh_held(void)
306 if (!debug_lockdep_rcu_enabled())
308 if (!rcu_is_watching())
310 if (!rcu_lockdep_current_cpu_online())
312 return in_softirq() || irqs_disabled();
314 EXPORT_SYMBOL_GPL(rcu_read_lock_bh_held);
316 #endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
319 * wakeme_after_rcu() - Callback function to awaken a task after grace period
320 * @head: Pointer to rcu_head member within rcu_synchronize structure
322 * Awaken the corresponding task now that a grace period has elapsed.
324 void wakeme_after_rcu(struct rcu_head *head)
326 struct rcu_synchronize *rcu;
328 rcu = container_of(head, struct rcu_synchronize, head);
329 complete(&rcu->completion);
331 EXPORT_SYMBOL_GPL(wakeme_after_rcu);
333 void __wait_rcu_gp(bool checktiny, int n, call_rcu_func_t *crcu_array,
334 struct rcu_synchronize *rs_array)
339 /* Initialize and register callbacks for each flavor specified. */
340 for (i = 0; i < n; i++) {
342 (crcu_array[i] == call_rcu ||
343 crcu_array[i] == call_rcu_bh)) {
347 init_rcu_head_on_stack(&rs_array[i].head);
348 init_completion(&rs_array[i].completion);
349 for (j = 0; j < i; j++)
350 if (crcu_array[j] == crcu_array[i])
353 (crcu_array[i])(&rs_array[i].head, wakeme_after_rcu);
356 /* Wait for all callbacks to be invoked. */
357 for (i = 0; i < n; i++) {
359 (crcu_array[i] == call_rcu ||
360 crcu_array[i] == call_rcu_bh))
362 for (j = 0; j < i; j++)
363 if (crcu_array[j] == crcu_array[i])
366 wait_for_completion(&rs_array[i].completion);
367 destroy_rcu_head_on_stack(&rs_array[i].head);
370 EXPORT_SYMBOL_GPL(__wait_rcu_gp);
372 #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
373 void init_rcu_head(struct rcu_head *head)
375 debug_object_init(head, &rcuhead_debug_descr);
377 EXPORT_SYMBOL_GPL(init_rcu_head);
379 void destroy_rcu_head(struct rcu_head *head)
381 debug_object_free(head, &rcuhead_debug_descr);
383 EXPORT_SYMBOL_GPL(destroy_rcu_head);
385 static bool rcuhead_is_static_object(void *addr)
391 * init_rcu_head_on_stack() - initialize on-stack rcu_head for debugobjects
392 * @head: pointer to rcu_head structure to be initialized
394 * This function informs debugobjects of a new rcu_head structure that
395 * has been allocated as an auto variable on the stack. This function
396 * is not required for rcu_head structures that are statically defined or
397 * that are dynamically allocated on the heap. This function has no
398 * effect for !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds.
400 void init_rcu_head_on_stack(struct rcu_head *head)
402 debug_object_init_on_stack(head, &rcuhead_debug_descr);
404 EXPORT_SYMBOL_GPL(init_rcu_head_on_stack);
407 * destroy_rcu_head_on_stack() - destroy on-stack rcu_head for debugobjects
408 * @head: pointer to rcu_head structure to be initialized
410 * This function informs debugobjects that an on-stack rcu_head structure
411 * is about to go out of scope. As with init_rcu_head_on_stack(), this
412 * function is not required for rcu_head structures that are statically
413 * defined or that are dynamically allocated on the heap. Also as with
414 * init_rcu_head_on_stack(), this function has no effect for
415 * !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds.
417 void destroy_rcu_head_on_stack(struct rcu_head *head)
419 debug_object_free(head, &rcuhead_debug_descr);
421 EXPORT_SYMBOL_GPL(destroy_rcu_head_on_stack);
423 struct debug_obj_descr rcuhead_debug_descr = {
425 .is_static_object = rcuhead_is_static_object,
427 EXPORT_SYMBOL_GPL(rcuhead_debug_descr);
428 #endif /* #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD */
430 #if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU) || defined(CONFIG_RCU_TRACE)
431 void do_trace_rcu_torture_read(const char *rcutorturename, struct rcu_head *rhp,
433 unsigned long c_old, unsigned long c)
435 trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c);
437 EXPORT_SYMBOL_GPL(do_trace_rcu_torture_read);
439 #define do_trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c) \
443 #ifdef CONFIG_RCU_STALL_COMMON
445 #ifdef CONFIG_PROVE_RCU
446 #define RCU_STALL_DELAY_DELTA (5 * HZ)
448 #define RCU_STALL_DELAY_DELTA 0
451 int rcu_cpu_stall_suppress __read_mostly; /* 1 = suppress stall warnings. */
452 EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress);
453 static int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
455 module_param(rcu_cpu_stall_suppress, int, 0644);
456 module_param(rcu_cpu_stall_timeout, int, 0644);
458 int rcu_jiffies_till_stall_check(void)
460 int till_stall_check = READ_ONCE(rcu_cpu_stall_timeout);
463 * Limit check must be consistent with the Kconfig limits
464 * for CONFIG_RCU_CPU_STALL_TIMEOUT.
466 if (till_stall_check < 3) {
467 WRITE_ONCE(rcu_cpu_stall_timeout, 3);
468 till_stall_check = 3;
469 } else if (till_stall_check > 300) {
470 WRITE_ONCE(rcu_cpu_stall_timeout, 300);
471 till_stall_check = 300;
473 return till_stall_check * HZ + RCU_STALL_DELAY_DELTA;
476 void rcu_sysrq_start(void)
478 if (!rcu_cpu_stall_suppress)
479 rcu_cpu_stall_suppress = 2;
482 void rcu_sysrq_end(void)
484 if (rcu_cpu_stall_suppress == 2)
485 rcu_cpu_stall_suppress = 0;
488 static int rcu_panic(struct notifier_block *this, unsigned long ev, void *ptr)
490 rcu_cpu_stall_suppress = 1;
494 static struct notifier_block rcu_panic_block = {
495 .notifier_call = rcu_panic,
498 static int __init check_cpu_stall_init(void)
500 atomic_notifier_chain_register(&panic_notifier_list, &rcu_panic_block);
503 early_initcall(check_cpu_stall_init);
505 #endif /* #ifdef CONFIG_RCU_STALL_COMMON */
507 #ifdef CONFIG_TASKS_RCU
510 * Simple variant of RCU whose quiescent states are voluntary context
511 * switch, cond_resched_rcu_qs(), user-space execution, and idle.
512 * As such, grace periods can take one good long time. There are no
513 * read-side primitives similar to rcu_read_lock() and rcu_read_unlock()
514 * because this implementation is intended to get the system into a safe
515 * state for some of the manipulations involved in tracing and the like.
516 * Finally, this implementation does not support high call_rcu_tasks()
517 * rates from multiple CPUs. If this is required, per-CPU callback lists
521 /* Global list of callbacks and associated lock. */
522 static struct rcu_head *rcu_tasks_cbs_head;
523 static struct rcu_head **rcu_tasks_cbs_tail = &rcu_tasks_cbs_head;
524 static DECLARE_WAIT_QUEUE_HEAD(rcu_tasks_cbs_wq);
525 static DEFINE_RAW_SPINLOCK(rcu_tasks_cbs_lock);
527 /* Track exiting tasks in order to allow them to be waited for. */
528 DEFINE_STATIC_SRCU(tasks_rcu_exit_srcu);
530 /* Control stall timeouts. Disable with <= 0, otherwise jiffies till stall. */
531 #define RCU_TASK_STALL_TIMEOUT (HZ * 60 * 10)
532 static int rcu_task_stall_timeout __read_mostly = RCU_TASK_STALL_TIMEOUT;
533 module_param(rcu_task_stall_timeout, int, 0644);
535 static struct task_struct *rcu_tasks_kthread_ptr;
538 * call_rcu_tasks() - Queue an RCU for invocation task-based grace period
539 * @rhp: structure to be used for queueing the RCU updates.
540 * @func: actual callback function to be invoked after the grace period
542 * The callback function will be invoked some time after a full grace
543 * period elapses, in other words after all currently executing RCU
544 * read-side critical sections have completed. call_rcu_tasks() assumes
545 * that the read-side critical sections end at a voluntary context
546 * switch (not a preemption!), cond_resched_rcu_qs(), entry into idle,
547 * or transition to usermode execution. As such, there are no read-side
548 * primitives analogous to rcu_read_lock() and rcu_read_unlock() because
549 * this primitive is intended to determine that all tasks have passed
550 * through a safe state, not so much for data-strcuture synchronization.
552 * See the description of call_rcu() for more detailed information on
553 * memory ordering guarantees.
555 void call_rcu_tasks(struct rcu_head *rhp, rcu_callback_t func)
562 raw_spin_lock_irqsave(&rcu_tasks_cbs_lock, flags);
563 needwake = !rcu_tasks_cbs_head;
564 *rcu_tasks_cbs_tail = rhp;
565 rcu_tasks_cbs_tail = &rhp->next;
566 raw_spin_unlock_irqrestore(&rcu_tasks_cbs_lock, flags);
567 /* We can't create the thread unless interrupts are enabled. */
568 if (needwake && READ_ONCE(rcu_tasks_kthread_ptr))
569 wake_up(&rcu_tasks_cbs_wq);
571 EXPORT_SYMBOL_GPL(call_rcu_tasks);
574 * synchronize_rcu_tasks - wait until an rcu-tasks grace period has elapsed.
576 * Control will return to the caller some time after a full rcu-tasks
577 * grace period has elapsed, in other words after all currently
578 * executing rcu-tasks read-side critical sections have elapsed. These
579 * read-side critical sections are delimited by calls to schedule(),
580 * cond_resched_tasks_rcu_qs(), idle execution, userspace execution, calls
581 * to synchronize_rcu_tasks(), and (in theory, anyway) cond_resched().
583 * This is a very specialized primitive, intended only for a few uses in
584 * tracing and other situations requiring manipulation of function
585 * preambles and profiling hooks. The synchronize_rcu_tasks() function
586 * is not (yet) intended for heavy use from multiple CPUs.
588 * Note that this guarantee implies further memory-ordering guarantees.
589 * On systems with more than one CPU, when synchronize_rcu_tasks() returns,
590 * each CPU is guaranteed to have executed a full memory barrier since the
591 * end of its last RCU-tasks read-side critical section whose beginning
592 * preceded the call to synchronize_rcu_tasks(). In addition, each CPU
593 * having an RCU-tasks read-side critical section that extends beyond
594 * the return from synchronize_rcu_tasks() is guaranteed to have executed
595 * a full memory barrier after the beginning of synchronize_rcu_tasks()
596 * and before the beginning of that RCU-tasks read-side critical section.
597 * Note that these guarantees include CPUs that are offline, idle, or
598 * executing in user mode, as well as CPUs that are executing in the kernel.
600 * Furthermore, if CPU A invoked synchronize_rcu_tasks(), which returned
601 * to its caller on CPU B, then both CPU A and CPU B are guaranteed
602 * to have executed a full memory barrier during the execution of
603 * synchronize_rcu_tasks() -- even if CPU A and CPU B are the same CPU
604 * (but again only if the system has more than one CPU).
606 void synchronize_rcu_tasks(void)
608 /* Complain if the scheduler has not started. */
609 RCU_LOCKDEP_WARN(rcu_scheduler_active == RCU_SCHEDULER_INACTIVE,
610 "synchronize_rcu_tasks called too soon");
612 /* Wait for the grace period. */
613 wait_rcu_gp(call_rcu_tasks);
615 EXPORT_SYMBOL_GPL(synchronize_rcu_tasks);
618 * rcu_barrier_tasks - Wait for in-flight call_rcu_tasks() callbacks.
620 * Although the current implementation is guaranteed to wait, it is not
621 * obligated to, for example, if there are no pending callbacks.
623 void rcu_barrier_tasks(void)
625 /* There is only one callback queue, so this is easy. ;-) */
626 synchronize_rcu_tasks();
628 EXPORT_SYMBOL_GPL(rcu_barrier_tasks);
630 /* See if tasks are still holding out, complain if so. */
631 static void check_holdout_task(struct task_struct *t,
632 bool needreport, bool *firstreport)
636 if (!READ_ONCE(t->rcu_tasks_holdout) ||
637 t->rcu_tasks_nvcsw != READ_ONCE(t->nvcsw) ||
638 !READ_ONCE(t->on_rq) ||
639 (IS_ENABLED(CONFIG_NO_HZ_FULL) &&
640 !is_idle_task(t) && t->rcu_tasks_idle_cpu >= 0)) {
641 WRITE_ONCE(t->rcu_tasks_holdout, false);
642 list_del_init(&t->rcu_tasks_holdout_list);
646 rcu_request_urgent_qs_task(t);
650 pr_err("INFO: rcu_tasks detected stalls on tasks:\n");
651 *firstreport = false;
654 pr_alert("%p: %c%c nvcsw: %lu/%lu holdout: %d idle_cpu: %d/%d\n",
655 t, ".I"[is_idle_task(t)],
656 "N."[cpu < 0 || !tick_nohz_full_cpu(cpu)],
657 t->rcu_tasks_nvcsw, t->nvcsw, t->rcu_tasks_holdout,
658 t->rcu_tasks_idle_cpu, cpu);
662 /* RCU-tasks kthread that detects grace periods and invokes callbacks. */
663 static int __noreturn rcu_tasks_kthread(void *arg)
666 struct task_struct *g, *t;
667 unsigned long lastreport;
668 struct rcu_head *list;
669 struct rcu_head *next;
670 LIST_HEAD(rcu_tasks_holdouts);
673 /* Run on housekeeping CPUs by default. Sysadm can move if desired. */
674 housekeeping_affine(current, HK_FLAG_RCU);
677 * Each pass through the following loop makes one check for
678 * newly arrived callbacks, and, if there are some, waits for
679 * one RCU-tasks grace period and then invokes the callbacks.
680 * This loop is terminated by the system going down. ;-)
684 /* Pick up any new callbacks. */
685 raw_spin_lock_irqsave(&rcu_tasks_cbs_lock, flags);
686 list = rcu_tasks_cbs_head;
687 rcu_tasks_cbs_head = NULL;
688 rcu_tasks_cbs_tail = &rcu_tasks_cbs_head;
689 raw_spin_unlock_irqrestore(&rcu_tasks_cbs_lock, flags);
691 /* If there were none, wait a bit and start over. */
693 wait_event_interruptible(rcu_tasks_cbs_wq,
695 if (!rcu_tasks_cbs_head) {
696 WARN_ON(signal_pending(current));
697 schedule_timeout_interruptible(HZ/10);
703 * Wait for all pre-existing t->on_rq and t->nvcsw
704 * transitions to complete. Invoking synchronize_sched()
705 * suffices because all these transitions occur with
706 * interrupts disabled. Without this synchronize_sched(),
707 * a read-side critical section that started before the
708 * grace period might be incorrectly seen as having started
709 * after the grace period.
711 * This synchronize_sched() also dispenses with the
712 * need for a memory barrier on the first store to
713 * ->rcu_tasks_holdout, as it forces the store to happen
714 * after the beginning of the grace period.
719 * There were callbacks, so we need to wait for an
720 * RCU-tasks grace period. Start off by scanning
721 * the task list for tasks that are not already
722 * voluntarily blocked. Mark these tasks and make
723 * a list of them in rcu_tasks_holdouts.
726 for_each_process_thread(g, t) {
727 if (t != current && READ_ONCE(t->on_rq) &&
730 t->rcu_tasks_nvcsw = READ_ONCE(t->nvcsw);
731 WRITE_ONCE(t->rcu_tasks_holdout, true);
732 list_add(&t->rcu_tasks_holdout_list,
733 &rcu_tasks_holdouts);
739 * Wait for tasks that are in the process of exiting.
740 * This does only part of the job, ensuring that all
741 * tasks that were previously exiting reach the point
742 * where they have disabled preemption, allowing the
743 * later synchronize_sched() to finish the job.
745 synchronize_srcu(&tasks_rcu_exit_srcu);
748 * Each pass through the following loop scans the list
749 * of holdout tasks, removing any that are no longer
750 * holdouts. When the list is empty, we are done.
752 lastreport = jiffies;
754 /* Start off with HZ/10 wait and slowly back off to 1 HZ wait*/
761 struct task_struct *t1;
763 if (list_empty(&rcu_tasks_holdouts))
766 /* Slowly back off waiting for holdouts */
767 schedule_timeout_interruptible(HZ/fract);
772 rtst = READ_ONCE(rcu_task_stall_timeout);
773 needreport = rtst > 0 &&
774 time_after(jiffies, lastreport + rtst);
776 lastreport = jiffies;
778 WARN_ON(signal_pending(current));
779 list_for_each_entry_safe(t, t1, &rcu_tasks_holdouts,
780 rcu_tasks_holdout_list) {
781 check_holdout_task(t, needreport, &firstreport);
787 * Because ->on_rq and ->nvcsw are not guaranteed
788 * to have a full memory barriers prior to them in the
789 * schedule() path, memory reordering on other CPUs could
790 * cause their RCU-tasks read-side critical sections to
791 * extend past the end of the grace period. However,
792 * because these ->nvcsw updates are carried out with
793 * interrupts disabled, we can use synchronize_sched()
794 * to force the needed ordering on all such CPUs.
796 * This synchronize_sched() also confines all
797 * ->rcu_tasks_holdout accesses to be within the grace
798 * period, avoiding the need for memory barriers for
799 * ->rcu_tasks_holdout accesses.
801 * In addition, this synchronize_sched() waits for exiting
802 * tasks to complete their final preempt_disable() region
803 * of execution, cleaning up after the synchronize_srcu()
808 /* Invoke the callbacks. */
817 /* Paranoid sleep to keep this from entering a tight loop */
818 schedule_timeout_uninterruptible(HZ/10);
822 /* Spawn rcu_tasks_kthread() at core_initcall() time. */
823 static int __init rcu_spawn_tasks_kthread(void)
825 struct task_struct *t;
827 t = kthread_run(rcu_tasks_kthread, NULL, "rcu_tasks_kthread");
829 smp_mb(); /* Ensure others see full kthread. */
830 WRITE_ONCE(rcu_tasks_kthread_ptr, t);
833 core_initcall(rcu_spawn_tasks_kthread);
835 /* Do the srcu_read_lock() for the above synchronize_srcu(). */
836 void exit_tasks_rcu_start(void)
839 current->rcu_tasks_idx = __srcu_read_lock(&tasks_rcu_exit_srcu);
843 /* Do the srcu_read_unlock() for the above synchronize_srcu(). */
844 void exit_tasks_rcu_finish(void)
847 __srcu_read_unlock(&tasks_rcu_exit_srcu, current->rcu_tasks_idx);
851 #endif /* #ifdef CONFIG_TASKS_RCU */
853 #ifndef CONFIG_TINY_RCU
856 * Print any non-default Tasks RCU settings.
858 static void __init rcu_tasks_bootup_oddness(void)
860 #ifdef CONFIG_TASKS_RCU
861 if (rcu_task_stall_timeout != RCU_TASK_STALL_TIMEOUT)
862 pr_info("\tTasks-RCU CPU stall warnings timeout set to %d (rcu_task_stall_timeout).\n", rcu_task_stall_timeout);
864 pr_info("\tTasks RCU enabled.\n");
865 #endif /* #ifdef CONFIG_TASKS_RCU */
868 #endif /* #ifndef CONFIG_TINY_RCU */
870 #ifdef CONFIG_PROVE_RCU
873 * Early boot self test parameters, one for each flavor
875 static bool rcu_self_test;
876 static bool rcu_self_test_bh;
877 static bool rcu_self_test_sched;
879 module_param(rcu_self_test, bool, 0444);
880 module_param(rcu_self_test_bh, bool, 0444);
881 module_param(rcu_self_test_sched, bool, 0444);
883 static int rcu_self_test_counter;
885 static void test_callback(struct rcu_head *r)
887 rcu_self_test_counter++;
888 pr_info("RCU test callback executed %d\n", rcu_self_test_counter);
891 static void early_boot_test_call_rcu(void)
893 static struct rcu_head head;
895 call_rcu(&head, test_callback);
898 static void early_boot_test_call_rcu_bh(void)
900 static struct rcu_head head;
902 call_rcu_bh(&head, test_callback);
905 static void early_boot_test_call_rcu_sched(void)
907 static struct rcu_head head;
909 call_rcu_sched(&head, test_callback);
912 void rcu_early_boot_tests(void)
914 pr_info("Running RCU self tests\n");
917 early_boot_test_call_rcu();
918 if (rcu_self_test_bh)
919 early_boot_test_call_rcu_bh();
920 if (rcu_self_test_sched)
921 early_boot_test_call_rcu_sched();
922 rcu_test_sync_prims();
925 static int rcu_verify_early_boot_tests(void)
928 int early_boot_test_counter = 0;
931 early_boot_test_counter++;
934 if (rcu_self_test_bh) {
935 early_boot_test_counter++;
938 if (rcu_self_test_sched) {
939 early_boot_test_counter++;
943 if (rcu_self_test_counter != early_boot_test_counter) {
950 late_initcall(rcu_verify_early_boot_tests);
952 void rcu_early_boot_tests(void) {}
953 #endif /* CONFIG_PROVE_RCU */
955 #ifndef CONFIG_TINY_RCU
958 * Print any significant non-default boot-time settings.
960 void __init rcupdate_announce_bootup_oddness(void)
963 pr_info("\tNo expedited grace period (rcu_normal).\n");
964 else if (rcu_normal_after_boot)
965 pr_info("\tNo expedited grace period (rcu_normal_after_boot).\n");
966 else if (rcu_expedited)
967 pr_info("\tAll grace periods are expedited (rcu_expedited).\n");
968 if (rcu_cpu_stall_suppress)
969 pr_info("\tRCU CPU stall warnings suppressed (rcu_cpu_stall_suppress).\n");
970 if (rcu_cpu_stall_timeout != CONFIG_RCU_CPU_STALL_TIMEOUT)
971 pr_info("\tRCU CPU stall warnings timeout set to %d (rcu_cpu_stall_timeout).\n", rcu_cpu_stall_timeout);
972 rcu_tasks_bootup_oddness();
975 #endif /* #ifndef CONFIG_TINY_RCU */