4 * This file was part of the Independent JPEG Group's software:
5 * Copyright (C) 1994-1996, Thomas G. Lane.
6 * libjpeg-turbo Modifications:
7 * Copyright (C) 2010, D. R. Commander.
8 * For conditions of distribution and use, see the accompanying README file.
10 * This file contains application interface code for the decompression half
11 * of the JPEG library. These are the "standard" API routines that are
12 * used in the normal full-decompression case. They are not used by a
13 * transcoding-only application. Note that if an application links in
14 * jpeg_start_decompress, it will end up linking in the entire decompressor.
15 * We thus must separate this file from jdapimin.c to avoid linking the
16 * whole decompression library into a transcoder.
19 #define JPEG_INTERNALS
25 /* Forward declarations */
26 LOCAL(boolean) output_pass_setup JPP((j_decompress_ptr cinfo));
30 * Decompression initialization.
31 * jpeg_read_header must be completed before calling this.
33 * If a multipass operating mode was selected, this will do all but the
34 * last pass, and thus may take a great deal of time.
36 * Returns FALSE if suspended. The return value need be inspected only if
37 * a suspending data source is used.
41 jpeg_start_decompress (j_decompress_ptr cinfo)
43 if (cinfo->global_state == DSTATE_READY) {
44 /* First call: initialize master control, select active modules */
45 jinit_master_decompress(cinfo);
46 if (cinfo->buffered_image) {
47 /* No more work here; expecting jpeg_start_output next */
48 cinfo->global_state = DSTATE_BUFIMAGE;
51 cinfo->global_state = DSTATE_PRELOAD;
53 if (cinfo->global_state == DSTATE_PRELOAD) {
54 /* If file has multiple scans, absorb them all into the coef buffer */
55 if (cinfo->inputctl->has_multiple_scans) {
56 #ifdef D_MULTISCAN_FILES_SUPPORTED
59 /* Call progress monitor hook if present */
60 if (cinfo->progress != NULL)
61 (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
62 /* Absorb some more input */
63 retcode = (*cinfo->inputctl->consume_input) (cinfo);
64 if (retcode == JPEG_SUSPENDED)
66 if (retcode == JPEG_REACHED_EOI)
68 /* Advance progress counter if appropriate */
69 if (cinfo->progress != NULL &&
70 (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
71 if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
72 /* jdmaster underestimated number of scans; ratchet up one scan */
73 cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
78 ERREXIT(cinfo, JERR_NOT_COMPILED);
79 #endif /* D_MULTISCAN_FILES_SUPPORTED */
81 cinfo->output_scan_number = cinfo->input_scan_number;
82 } else if (cinfo->global_state != DSTATE_PRESCAN)
83 ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
84 /* Perform any dummy output passes, and set up for the final pass */
85 return output_pass_setup(cinfo);
90 * Set up for an output pass, and perform any dummy pass(es) needed.
91 * Common subroutine for jpeg_start_decompress and jpeg_start_output.
92 * Entry: global_state = DSTATE_PRESCAN only if previously suspended.
93 * Exit: If done, returns TRUE and sets global_state for proper output mode.
94 * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN.
98 output_pass_setup (j_decompress_ptr cinfo)
100 if (cinfo->global_state != DSTATE_PRESCAN) {
101 /* First call: do pass setup */
102 (*cinfo->master->prepare_for_output_pass) (cinfo);
103 cinfo->output_scanline = 0;
104 cinfo->global_state = DSTATE_PRESCAN;
106 /* Loop over any required dummy passes */
107 while (cinfo->master->is_dummy_pass) {
108 #ifdef QUANT_2PASS_SUPPORTED
109 /* Crank through the dummy pass */
110 while (cinfo->output_scanline < cinfo->output_height) {
111 JDIMENSION last_scanline;
112 /* Call progress monitor hook if present */
113 if (cinfo->progress != NULL) {
114 cinfo->progress->pass_counter = (long) cinfo->output_scanline;
115 cinfo->progress->pass_limit = (long) cinfo->output_height;
116 (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
118 /* Process some data */
119 last_scanline = cinfo->output_scanline;
120 (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL,
121 &cinfo->output_scanline, (JDIMENSION) 0);
122 if (cinfo->output_scanline == last_scanline)
123 return FALSE; /* No progress made, must suspend */
125 /* Finish up dummy pass, and set up for another one */
126 (*cinfo->master->finish_output_pass) (cinfo);
127 (*cinfo->master->prepare_for_output_pass) (cinfo);
128 cinfo->output_scanline = 0;
130 ERREXIT(cinfo, JERR_NOT_COMPILED);
131 #endif /* QUANT_2PASS_SUPPORTED */
133 /* Ready for application to drive output pass through
134 * jpeg_read_scanlines or jpeg_read_raw_data.
136 cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING;
142 * Read some scanlines of data from the JPEG decompressor.
144 * The return value will be the number of lines actually read.
145 * This may be less than the number requested in several cases,
146 * including bottom of image, data source suspension, and operating
147 * modes that emit multiple scanlines at a time.
149 * Note: we warn about excess calls to jpeg_read_scanlines() since
150 * this likely signals an application programmer error. However,
151 * an oversize buffer (max_lines > scanlines remaining) is not an error.
155 jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines,
156 JDIMENSION max_lines)
160 if (cinfo->global_state != DSTATE_SCANNING)
161 ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
162 if (cinfo->output_scanline >= cinfo->output_height) {
163 WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
167 /* Call progress monitor hook if present */
168 if (cinfo->progress != NULL) {
169 cinfo->progress->pass_counter = (long) cinfo->output_scanline;
170 cinfo->progress->pass_limit = (long) cinfo->output_height;
171 (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
174 /* Process some data */
176 (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines);
177 cinfo->output_scanline += row_ctr;
183 * Alternate entry point to read raw data.
184 * Processes exactly one iMCU row per call, unless suspended.
188 jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data,
189 JDIMENSION max_lines)
191 JDIMENSION lines_per_iMCU_row;
193 if (cinfo->global_state != DSTATE_RAW_OK)
194 ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
195 if (cinfo->output_scanline >= cinfo->output_height) {
196 WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
200 /* Call progress monitor hook if present */
201 if (cinfo->progress != NULL) {
202 cinfo->progress->pass_counter = (long) cinfo->output_scanline;
203 cinfo->progress->pass_limit = (long) cinfo->output_height;
204 (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
207 /* Verify that at least one iMCU row can be returned. */
208 lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->_min_DCT_scaled_size;
209 if (max_lines < lines_per_iMCU_row)
210 ERREXIT(cinfo, JERR_BUFFER_SIZE);
212 /* Decompress directly into user's buffer. */
213 if (! (*cinfo->coef->decompress_data) (cinfo, data))
214 return 0; /* suspension forced, can do nothing more */
216 /* OK, we processed one iMCU row. */
217 cinfo->output_scanline += lines_per_iMCU_row;
218 return lines_per_iMCU_row;
222 /* Additional entry points for buffered-image mode. */
224 #ifdef D_MULTISCAN_FILES_SUPPORTED
227 * Initialize for an output pass in buffered-image mode.
231 jpeg_start_output (j_decompress_ptr cinfo, int scan_number)
233 if (cinfo->global_state != DSTATE_BUFIMAGE &&
234 cinfo->global_state != DSTATE_PRESCAN)
235 ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
236 /* Limit scan number to valid range */
237 if (scan_number <= 0)
239 if (cinfo->inputctl->eoi_reached &&
240 scan_number > cinfo->input_scan_number)
241 scan_number = cinfo->input_scan_number;
242 cinfo->output_scan_number = scan_number;
243 /* Perform any dummy output passes, and set up for the real pass */
244 return output_pass_setup(cinfo);
249 * Finish up after an output pass in buffered-image mode.
251 * Returns FALSE if suspended. The return value need be inspected only if
252 * a suspending data source is used.
256 jpeg_finish_output (j_decompress_ptr cinfo)
258 if ((cinfo->global_state == DSTATE_SCANNING ||
259 cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) {
260 /* Terminate this pass. */
261 /* We do not require the whole pass to have been completed. */
262 (*cinfo->master->finish_output_pass) (cinfo);
263 cinfo->global_state = DSTATE_BUFPOST;
264 } else if (cinfo->global_state != DSTATE_BUFPOST) {
265 /* BUFPOST = repeat call after a suspension, anything else is error */
266 ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
268 /* Read markers looking for SOS or EOI */
269 while (cinfo->input_scan_number <= cinfo->output_scan_number &&
270 ! cinfo->inputctl->eoi_reached) {
271 if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED)
272 return FALSE; /* Suspend, come back later */
274 cinfo->global_state = DSTATE_BUFIMAGE;
278 #endif /* D_MULTISCAN_FILES_SUPPORTED */