Convert CONFIG_SAMSUNG_ONENAND to Kconfig
[platform/kernel/u-boot.git] / include / wdt.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2017 Google, Inc
4  */
5
6 #ifndef _WDT_H_
7 #define _WDT_H_
8
9 struct udevice;
10
11 /*
12  * Implement a simple watchdog uclass. Watchdog is basically a timer that
13  * is used to detect or recover from malfunction. During normal operation
14  * the watchdog would be regularly reset to prevent it from timing out.
15  * If, due to a hardware fault or program error, the computer fails to reset
16  * the watchdog, the timer will elapse and generate a timeout signal.
17  * The timeout signal is used to initiate corrective action or actions,
18  * which typically include placing the system in a safe, known state.
19  */
20
21 /*
22  * Start the timer
23  *
24  * @dev: WDT Device
25  * @timeout_ms: Number of ticks (milliseconds) before timer expires
26  * @flags: Driver specific flags. This might be used to specify
27  * which action needs to be executed when the timer expires
28  * @return: 0 if OK, -ve on error
29  */
30 int wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags);
31
32 /*
33  * Stop the timer, thus disabling the Watchdog. Use wdt_start to start it again.
34  *
35  * @dev: WDT Device
36  * @return: 0 if OK, -ve on error
37  */
38 int wdt_stop(struct udevice *dev);
39
40 /*
41  * Stop all registered watchdog devices.
42  *
43  * @return: 0 if ok, first error encountered otherwise (but wdt_stop()
44  * is still called on following devices)
45  */
46 int wdt_stop_all(void);
47
48 /*
49  * Reset the timer, typically restoring the counter to
50  * the value configured by start()
51  *
52  * @dev: WDT Device
53  * @return: 0 if OK, -ve on error
54  */
55 int wdt_reset(struct udevice *dev);
56
57 /*
58  * Expire the timer, thus executing its action immediately.
59  * This is typically used to reset the board or peripherals.
60  *
61  * @dev: WDT Device
62  * @flags: Driver specific flags
63  * Return: 0 if OK -ve on error. If wdt action is system reset,
64  * this function may never return.
65  */
66 int wdt_expire_now(struct udevice *dev, ulong flags);
67
68 /*
69  * struct wdt_ops - Driver model wdt operations
70  *
71  * The uclass interface is implemented by all wdt devices which use
72  * driver model.
73  */
74 struct wdt_ops {
75         /*
76          * Start the timer
77          *
78          * @dev: WDT Device
79          * @timeout_ms: Number of ticks (milliseconds) before the timer expires
80          * @flags: Driver specific flags. This might be used to specify
81          * which action needs to be executed when the timer expires
82          * @return: 0 if OK, -ve on error
83          */
84         int (*start)(struct udevice *dev, u64 timeout_ms, ulong flags);
85         /*
86          * Stop the timer
87          *
88          * @dev: WDT Device
89          * @return: 0 if OK, -ve on error
90          */
91         int (*stop)(struct udevice *dev);
92         /*
93          * Reset the timer, typically restoring the counter to
94          * the value configured by start()
95          *
96          * @dev: WDT Device
97          * @return: 0 if OK, -ve on error
98          */
99         int (*reset)(struct udevice *dev);
100         /*
101          * Expire the timer, thus executing the action immediately (optional)
102          *
103          * If this function is not provided, a default implementation
104          * will be used, which sets the counter to 1
105          * and waits forever. This is good enough for system level
106          * reset, where the function is not expected to return, but might not be
107          * good enough for other use cases.
108          *
109          * @dev: WDT Device
110          * @flags: Driver specific flags
111          * @return 0 if OK -ve on error. May not return.
112          */
113         int (*expire_now)(struct udevice *dev, ulong flags);
114 };
115
116 int initr_watchdog(void);
117
118 #endif  /* _WDT_H_ */