1 /* vi: set sw=8 ts=8: */
3 * This file suffers from chronically incorrect tabification
4 * of messages. Before editing this file:
5 * 1. Switch you editor to 8-space tab mode.
6 * 2. Do not use \t in messages, use real tab character.
7 * 3. Start each source line with message as follows:
8 * |<7 spaces>"text with tabs"....
10 * |<5 spaces>"\ntext with tabs"....
16 #define NOUSAGE_STR "\b"
20 #define acpid_trivial_usage \
21 "[-d] [-c CONFDIR] [-l LOGFILE] [-a ACTIONFILE] [-M MAPFILE] [-e PROC_EVENT_FILE] [-p PIDFILE]"
22 #define acpid_full_usage "\n\n" \
23 "Listen to ACPI events and spawn specific helpers on event arrival\n" \
25 "\n -c DIR Config directory [/etc/acpi]" \
26 "\n -d Don't daemonize, (implies -f)" \
27 "\n -e FILE /proc event file [/proc/acpi/event]" \
28 "\n -f Run in foreground" \
29 "\n -l FILE Log file [/var/log/acpid.log]" \
30 "\n -p FILE Pid file [/var/run/acpid.pid]" \
31 "\n -a FILE Action file [/etc/acpid.conf]" \
32 "\n -M FILE Map file [/etc/acpi.map]" \
33 IF_FEATURE_ACPID_COMPAT( \
34 "\n\nAccept and ignore compatibility options -g -m -s -S -v" \
37 #define acpid_example_usage \
38 "Without -e option, acpid uses all /dev/input/event* files\n" \
40 "# acpid -l /var/log/my-acpi-log\n" \
41 "# acpid -e /proc/acpi/event\n"
43 #define addgroup_trivial_usage \
44 "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[USER] ") "GROUP"
45 #define addgroup_full_usage "\n\n" \
46 "Add a group " IF_FEATURE_ADDUSER_TO_GROUP("or add a user to a group") "\n" \
48 "\n -g GID Group id" \
49 "\n -S Create a system group" \
51 #define adduser_trivial_usage \
53 #define adduser_full_usage "\n\n" \
56 "\n -h DIR Home directory" \
57 "\n -g GECOS GECOS field" \
58 "\n -s SHELL Login shell" \
59 "\n -G GRP Add user to existing group" \
60 "\n -S Create a system user" \
61 "\n -D Don't assign a password" \
62 "\n -H Don't create home directory" \
65 #define adjtimex_trivial_usage \
66 "[-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]"
67 #define adjtimex_full_usage "\n\n" \
68 "Read and optionally set system timebase parameters. See adjtimex(2)\n" \
71 "\n -o OFF Time offset, microseconds" \
72 "\n -f FREQ Frequency adjust, integer kernel units (65536 is 1ppm)" \
73 "\n (positive values make clock run faster)" \
74 "\n -t TICK Microseconds per tick, usually 10000" \
77 #define ar_trivial_usage \
78 "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
79 #define ar_full_usage "\n\n" \
80 "Extract or list FILES from an ar archive\n" \
82 "\n -o Preserve original dates" \
83 "\n -p Extract to stdout" \
88 #define arp_trivial_usage \
89 "\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \
90 "\n[-v] [-i IF] -d HOSTNAME [pub]" \
91 "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \
92 "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \
93 "\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub"
94 #define arp_full_usage "\n\n" \
95 "Manipulate ARP cache\n" \
97 "\n -a Display (all) hosts" \
98 "\n -s Set new ARP entry" \
99 "\n -d Delete a specified entry" \
101 "\n -n Don't resolve names" \
102 "\n -i IF Network interface" \
103 "\n -D Read <hwaddr> from given device" \
104 "\n -A,-p AF Protocol family" \
105 "\n -H HWTYPE Hardware address type" \
107 #define arping_trivial_usage \
108 "[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP"
109 #define arping_full_usage "\n\n" \
110 "Send ARP requests/replies\n" \
112 "\n -f Quit on first ARP reply" \
114 "\n -b Keep broadcasting, don't go unicast" \
115 "\n -D Duplicated address detection mode" \
116 "\n -U Unsolicited ARP mode, update your neighbors" \
117 "\n -A ARP answer mode, update your neighbors" \
118 "\n -c N Stop after sending N ARP requests" \
119 "\n -w TIMEOUT Time to wait for ARP reply, seconds" \
120 "\n -I IFACE Interface to use (default eth0)" \
121 "\n -s SRC_IP Sender IP address" \
122 "\n DST_IP Target IP address" \
124 #define awk_trivial_usage \
125 "[OPTIONS] [AWK_PROGRAM] [FILE]..."
126 #define awk_full_usage "\n\n" \
128 "\n -v VAR=VAL Set variable" \
129 "\n -F SEP Use SEP as field separator" \
130 "\n -f FILE Read program from FILE" \
132 #define basename_trivial_usage \
134 #define basename_full_usage "\n\n" \
135 "Strip directory path and .SUFFIX from FILE\n"
136 #define basename_example_usage \
137 "$ basename /usr/local/bin/foo\n" \
139 "$ basename /usr/local/bin/\n" \
141 "$ basename /foo/bar.txt .txt\n" \
144 #define beep_trivial_usage \
145 "-f FREQ -l LEN -d DELAY -r COUNT -n"
146 #define beep_full_usage "\n\n" \
148 "\n -f Frequency in Hz" \
149 "\n -l Length in ms" \
150 "\n -d Delay in ms" \
151 "\n -r Repetitions" \
152 "\n -n Start new tone" \
154 #define blkid_trivial_usage \
156 #define blkid_full_usage "\n\n" \
157 "Print UUIDs of all filesystems"
159 #define brctl_trivial_usage \
160 "COMMAND [BRIDGE [INTERFACE]]"
161 #define brctl_full_usage "\n\n" \
162 "Manage ethernet bridges\n" \
164 IF_FEATURE_BRCTL_SHOW( \
165 "\n show Show a list of bridges" \
167 "\n addbr BRIDGE Create BRIDGE" \
168 "\n delbr BRIDGE Delete BRIDGE" \
169 "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \
170 "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \
171 IF_FEATURE_BRCTL_FANCY( \
172 "\n setageing BRIDGE TIME Set ageing time" \
173 "\n setfd BRIDGE TIME Set bridge forward delay" \
174 "\n sethello BRIDGE TIME Set hello time" \
175 "\n setmaxage BRIDGE TIME Set max message age" \
176 "\n setpathcost BRIDGE COST Set path cost" \
177 "\n setportprio BRIDGE PRIO Set port priority" \
178 "\n setbridgeprio BRIDGE PRIO Set bridge priority" \
179 "\n stp BRIDGE [1/yes/on|0/no/off] STP on/off" \
182 #define bzip2_trivial_usage \
183 "[OPTIONS] [FILE]..."
184 #define bzip2_full_usage "\n\n" \
185 "Compress FILEs (or stdin) with bzip2 algorithm\n" \
187 "\n -1..9 Compression level" \
189 "\n -c Write to stdout" \
192 #define busybox_notes_usage \
195 #define lzop_trivial_usage \
196 "[-cfvd123456789CF] [FILE]..."
197 #define lzop_full_usage "\n\n" \
199 "\n -1..9 Compression level" \
201 "\n -c Write to stdout" \
204 "\n -F Don't store or verify checksum" \
205 "\n -C Also write checksum of compressed block" \
207 #define lzopcat_trivial_usage \
209 #define lzopcat_full_usage "\n\n" \
211 "\n -F Don't store or verify checksum" \
213 #define unlzop_trivial_usage \
215 #define unlzop_full_usage "\n\n" \
217 "\n -c Write to stdout" \
220 "\n -F Don't store or verify checksum" \
222 #define unlzma_trivial_usage \
224 #define unlzma_full_usage "\n\n" \
225 "Decompress FILE (or stdin)\n" \
227 "\n -c Write to stdout" \
230 #define lzma_trivial_usage \
232 #define lzma_full_usage "\n\n" \
233 "Decompress FILE (or stdin)\n" \
236 "\n -c Write to stdout" \
239 #define lzcat_trivial_usage \
241 #define lzcat_full_usage "\n\n" \
242 "Decompress to stdout"
244 #define unxz_trivial_usage \
246 #define unxz_full_usage "\n\n" \
247 "Decompress FILE (or stdin)\n" \
249 "\n -c Write to stdout" \
252 #define xz_trivial_usage \
254 #define xz_full_usage "\n\n" \
255 "Decompress FILE (or stdin)\n" \
258 "\n -c Write to stdout" \
261 #define xzcat_trivial_usage \
263 #define xzcat_full_usage "\n\n" \
264 "Decompress to stdout"
266 #define cal_trivial_usage \
267 "[-jy] [[MONTH] YEAR]"
268 #define cal_full_usage "\n\n" \
269 "Display a calendar\n" \
271 "\n -j Use julian dates" \
272 "\n -y Display the entire year" \
274 #define cat_trivial_usage \
276 #define cat_full_usage "\n\n" \
277 "Concatenate FILEs and print them to stdout" \
279 #define cat_example_usage \
280 "$ cat /proc/uptime\n" \
283 #define catv_trivial_usage \
285 #define catv_full_usage "\n\n" \
286 "Display nonprinting characters as ^x or M-x\n" \
288 "\n -e End each line with $" \
289 "\n -t Show tabs as ^I" \
290 "\n -v Don't use ^x or M-x escapes" \
292 #define chat_trivial_usage \
293 "EXPECT [SEND [EXPECT [SEND...]]]"
294 #define chat_full_usage "\n\n" \
295 "Useful for interacting with a modem connected to stdin/stdout.\n" \
296 "A script consists of one or more \"expect-send\" pairs of strings,\n" \
297 "each pair is a pair of arguments. Example:\n" \
298 "chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \
300 #define chattr_trivial_usage \
301 "[-R] [-+=AacDdijsStTu] [-v VERSION] [FILE]..."
302 #define chattr_full_usage "\n\n" \
303 "Change file attributes on an ext2 fs\n" \
305 "\n - Remove attributes" \
306 "\n + Add attributes" \
307 "\n = Set attributes" \
309 "\n A Don't track atime" \
310 "\n a Append mode only" \
311 "\n c Enable compress" \
312 "\n D Write dir contents synchronously" \
313 "\n d Don't backup with dump" \
314 "\n i Cannot be modified (immutable)" \
315 "\n j Write all data to journal first" \
316 "\n s Zero disk storage when deleted" \
317 "\n S Write file contents synchronously" \
318 "\n t Disable tail-merging of partial blocks with other files" \
319 "\n u Allow file to be undeleted" \
322 "\n -v Set the file's version/generation number" \
324 #define chcon_trivial_usage \
325 "[OPTIONS] CONTEXT FILE..." \
326 "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \
327 IF_FEATURE_CHCON_LONG_OPTIONS( \
328 "\n chcon [OPTIONS] --reference=RFILE FILE..." \
330 #define chcon_full_usage "\n\n" \
331 "Change the security context of each FILE to CONTEXT\n" \
332 IF_FEATURE_CHCON_LONG_OPTIONS( \
333 "\n -v,--verbose Verbose" \
334 "\n -c,--changes Report changes made" \
335 "\n -h,--no-dereference Affect symlinks instead of their targets" \
336 "\n -f,--silent,--quiet Suppress most error messages" \
337 "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
338 "\n -u,--user=USER Set user/role/type/range in the target" \
339 "\n -r,--role=ROLE security context" \
340 "\n -t,--type=TYPE" \
341 "\n -l,--range=RANGE" \
342 "\n -R,--recursive Recurse" \
344 IF_NOT_FEATURE_CHCON_LONG_OPTIONS( \
346 "\n -c Report changes made" \
347 "\n -h Affect symlinks instead of their targets" \
348 "\n -f Suppress most error messages" \
349 "\n -u USER Set user/role/type/range in the target security context" \
356 #define chmod_trivial_usage \
357 "[-R"IF_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
358 #define chmod_full_usage "\n\n" \
359 "Each MODE is one or more of the letters ugoa, one of the\n" \
360 "symbols +-= and one or more of the letters rwxst\n" \
364 "\n -c List changed files" \
365 "\n -v List all files" \
366 "\n -f Hide errors" \
368 #define chmod_example_usage \
369 "$ ls -l /tmp/foo\n" \
370 "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
371 "$ chmod u+x /tmp/foo\n" \
372 "$ ls -l /tmp/foo\n" \
373 "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
374 "$ chmod 444 /tmp/foo\n" \
375 "$ ls -l /tmp/foo\n" \
376 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
378 #define chgrp_trivial_usage \
379 "[-RhLHP"IF_DESKTOP("cvf")"]... GROUP FILE..."
380 #define chgrp_full_usage "\n\n" \
381 "Change the group membership of each FILE to GROUP\n" \
384 "\n -h Affect symlinks instead of symlink targets" \
385 "\n -L Traverse all symlinks to directories" \
386 "\n -H Traverse symlinks on command line only" \
387 "\n -P Don't traverse symlinks (default)" \
389 "\n -c List changed files" \
391 "\n -f Hide errors" \
393 #define chgrp_example_usage \
394 "$ ls -l /tmp/foo\n" \
395 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
396 "$ chgrp root /tmp/foo\n" \
397 "$ ls -l /tmp/foo\n" \
398 "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
400 #define chown_trivial_usage \
401 "[-RhLHP"IF_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
402 #define chown_full_usage "\n\n" \
403 "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \
406 "\n -h Affect symlinks instead of symlink targets" \
407 "\n -L Traverse all symlinks to directories" \
408 "\n -H Traverse symlinks on command line only" \
409 "\n -P Don't traverse symlinks (default)" \
411 "\n -c List changed files" \
412 "\n -v List all files" \
413 "\n -f Hide errors" \
415 #define chown_example_usage \
416 "$ ls -l /tmp/foo\n" \
417 "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
418 "$ chown root /tmp/foo\n" \
419 "$ ls -l /tmp/foo\n" \
420 "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
421 "$ chown root.root /tmp/foo\n" \
423 "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
425 #define chpst_trivial_usage \
426 "[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \
427 " [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \
428 " [-p N] [-f BYTES] [-c BYTES] PROG ARGS"
429 #define chpst_full_usage "\n\n" \
430 "Change the process state, run PROG\n" \
432 "\n -u USER[:GRP] Set uid and gid" \
433 "\n -U USER[:GRP] Set $UID and $GID in environment" \
434 "\n -e DIR Set environment variables as specified by files" \
435 "\n in DIR: file=1st_line_of_file" \
436 "\n -/ DIR Chroot to DIR" \
437 "\n -n NICE Add NICE to nice value" \
438 "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \
439 "\n -d BYTES Limit data segment" \
440 "\n -o N Limit number of open files per process" \
441 "\n -p N Limit number of processes per uid" \
442 "\n -f BYTES Limit output file sizes" \
443 "\n -c BYTES Limit core file size" \
445 "\n -P Create new process group" \
446 "\n -0 Close stdin" \
447 "\n -1 Close stdout" \
448 "\n -2 Close stderr" \
450 #define setuidgid_trivial_usage \
452 #define setuidgid_full_usage "\n\n" \
453 "Set uid and gid to USER's uid and gid, drop supplementary group ids,\n" \
455 #define envuidgid_trivial_usage \
457 #define envuidgid_full_usage "\n\n" \
458 "Set $UID to USER's uid and $GID to USER's gid, run PROG"
459 #define envdir_trivial_usage \
461 #define envdir_full_usage "\n\n" \
462 "Set various environment variables as specified by files\n" \
463 "in the directory DIR, run PROG"
464 #define softlimit_trivial_usage \
465 "[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \
466 " [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \
468 #define softlimit_full_usage "\n\n" \
469 "Set soft resource limits, then run PROG\n" \
471 "\n -a BYTES Limit total size of all segments" \
472 "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \
473 "\n -d BYTES Limit data segment" \
474 "\n -s BYTES Limit stack segment" \
475 "\n -l BYTES Limit locked memory size" \
476 "\n -o N Limit number of open files per process" \
477 "\n -p N Limit number of processes per uid" \
478 "\nOptions controlling file sizes:" \
479 "\n -f BYTES Limit output file sizes" \
480 "\n -c BYTES Limit core file size" \
481 "\nEfficiency opts:" \
482 "\n -r BYTES Limit resident set size" \
483 "\n -t N Limit CPU time, process receives" \
484 "\n a SIGXCPU after N seconds" \
486 #define chroot_trivial_usage \
487 "NEWROOT [PROG ARGS]"
488 #define chroot_full_usage "\n\n" \
489 "Run PROG with root directory set to NEWROOT"
490 #define chroot_example_usage \
491 "$ ls -l /bin/ls\n" \
492 "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
493 "# mount /dev/hdc1 /mnt -t minix\n" \
495 "# ls -l /bin/ls\n" \
496 "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
498 #define chvt_trivial_usage \
500 #define chvt_full_usage "\n\n" \
501 "Change the foreground virtual terminal to /dev/ttyN"
503 #define cksum_trivial_usage \
505 #define cksum_full_usage "\n\n" \
506 "Calculate the CRC32 checksums of FILES"
508 #define clear_trivial_usage \
510 #define clear_full_usage "\n\n" \
513 #define cmp_trivial_usage \
514 "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]]") "]"
515 #define cmp_full_usage "\n\n" \
516 "Compare FILE1 with FILE2 (or stdin)\n" \
518 "\n -l Write the byte numbers (decimal) and values (octal)" \
519 "\n for all differing bytes" \
522 #define comm_trivial_usage \
524 #define comm_full_usage "\n\n" \
525 "Compare FILE1 with FILE2\n" \
527 "\n -1 Suppress lines unique to FILE1" \
528 "\n -2 Suppress lines unique to FILE2" \
529 "\n -3 Suppress lines common to both files" \
531 #define bbconfig_trivial_usage \
533 #define bbconfig_full_usage "\n\n" \
534 "Print the config file used by busybox build"
536 #define chrt_trivial_usage \
537 "[-prfom] [PRIO] [PID | PROG ARGS]"
538 #define chrt_full_usage "\n\n" \
539 "Change scheduling priority and class for a process\n" \
541 "\n -p Operate on PID" \
542 "\n -r Set SCHED_RR class" \
543 "\n -f Set SCHED_FIFO class" \
544 "\n -o Set SCHED_OTHER class" \
545 "\n -m Show min/max priorities" \
547 #define chrt_example_usage \
548 "$ chrt -r 4 sleep 900; x=$!\n" \
549 "$ chrt -f -p 3 $x\n" \
550 "You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
552 #define nice_trivial_usage \
553 "[-n ADJUST] [PROG ARGS]"
554 #define nice_full_usage "\n\n" \
555 "Change scheduling priority, run PROG\n" \
557 "\n -n ADJUST Adjust priority by ADJUST" \
559 #define renice_trivial_usage \
560 "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]"
561 #define renice_full_usage "\n\n" \
562 "Change scheduling priority for a running process\n" \
564 "\n -n Adjust current nice value (smaller is faster)" \
565 "\n -p Process id(s) (default)" \
566 "\n -g Process group id(s)" \
567 "\n -u Process user name(s) and/or id(s)" \
569 #define ionice_trivial_usage \
570 "[-c 1-3] [-n 0-7] [-p PID] [PROG]"
571 #define ionice_full_usage "\n\n" \
572 "Change I/O priority and class\n" \
574 "\n -c Class. 1:realtime 2:best-effort 3:idle" \
577 #define cp_trivial_usage \
578 "[OPTIONS] SOURCE DEST"
579 #define cp_full_usage "\n\n" \
580 "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \
582 "\n -a Same as -dpR" \
584 "\n -c Preserve security context" \
587 "\n -d,-P Preserve symlinks (default if -R)" \
588 "\n -L Follow all symlinks" \
589 "\n -H Follow symlinks on command line" \
590 "\n -p Preserve file attributes if possible" \
592 "\n -i Prompt before overwrite" \
593 "\n -l,-s Create (sym)links" \
595 #define cpio_trivial_usage \
596 "[-dmvu] [-F FILE]" IF_FEATURE_CPIO_O(" [-H newc]") \
597 " [-ti"IF_FEATURE_CPIO_O("o")"]" IF_FEATURE_CPIO_P(" [-p DIR]")
598 #define cpio_full_usage "\n\n" \
599 "Extract or list files from a cpio archive" \
600 IF_FEATURE_CPIO_O(", or" \
601 "\ncreate an archive" IF_FEATURE_CPIO_P(" (-o) or copy files (-p)") \
602 " using file list on stdin" \
605 "\nMain operation mode:" \
609 "\n -o Create (requires -H newc)" \
612 "\n -p DIR Copy files to DIR" \
615 "\n -d Make leading directories" \
616 "\n -m Preserve mtime" \
619 "\n -F FILE Input (-t,-i,-p) or output (-o) file" \
621 "\n -H newc Archive format" \
624 #define crond_trivial_usage \
625 "-fbS -l N " IF_FEATURE_CROND_D("-d N ") "-L LOGFILE -c DIR"
626 #define crond_full_usage "\n\n" \
628 "\n -b Background (default)" \
629 "\n -S Log to syslog (default)" \
630 "\n -l Set log level. 0 is the most verbose, default 8" \
631 IF_FEATURE_CROND_D( \
632 "\n -d Set log level, log to stderr" \
634 "\n -L Log to file" \
635 "\n -c Working dir" \
637 #define crontab_trivial_usage \
638 "[-c DIR] [-u USER] [-ler]|[FILE]"
639 #define crontab_full_usage "\n\n" \
640 " -c Crontab directory" \
642 "\n -l List crontab" \
643 "\n -e Edit crontab" \
644 "\n -r Delete crontab" \
645 "\n FILE Replace crontab by FILE ('-': stdin)" \
647 #define cryptpw_trivial_usage \
648 "[OPTIONS] [PASSWORD] [SALT]"
649 /* We do support -s, we just don't mention it */
650 #define cryptpw_full_usage "\n\n" \
651 "Crypt the PASSWORD using crypt(3)\n" \
654 "\n -P,--password-fd=N Read password from fd N" \
655 /* "\n -s,--stdin Use stdin; like -P0" */ \
656 "\n -m,--method=TYPE Encryption method TYPE" \
657 "\n -S,--salt=SALT" \
660 "\n -P N Read password from fd N" \
661 /* "\n -s Use stdin; like -P0" */ \
662 "\n -m TYPE Encryption method TYPE" \
666 /* mkpasswd is an alias to cryptpw */
668 #define mkpasswd_trivial_usage \
669 "[OPTIONS] [PASSWORD] [SALT]"
670 /* We do support -s, we just don't mention it */
671 #define mkpasswd_full_usage "\n\n" \
672 "Crypt the PASSWORD using crypt(3)\n" \
675 "\n -P,--password-fd=N Read password from fd N" \
676 /* "\n -s,--stdin Use stdin; like -P0" */ \
677 "\n -m,--method=TYPE Encryption method TYPE" \
678 "\n -S,--salt=SALT" \
681 "\n -P N Read password from fd N" \
682 /* "\n -s Use stdin; like -P0" */ \
683 "\n -m TYPE Encryption method TYPE" \
687 #define cut_trivial_usage \
688 "[OPTIONS] [FILE]..."
689 #define cut_full_usage "\n\n" \
690 "Print selected fields from each input FILE to stdout\n" \
692 "\n -b LIST Output only bytes from LIST" \
693 "\n -c LIST Output only characters from LIST" \
694 "\n -d CHAR Use CHAR instead of tab as the field delimiter" \
695 "\n -s Output only the lines containing delimiter" \
696 "\n -f N Print only these fields" \
699 #define cut_example_usage \
700 "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
702 "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
705 #define dd_trivial_usage \
706 "[if=FILE] [of=FILE] " IF_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
707 " [seek=N]" IF_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]")
708 #define dd_full_usage "\n\n" \
709 "Copy a file with converting and formatting\n" \
711 "\n if=FILE Read from FILE instead of stdin" \
712 "\n of=FILE Write to FILE instead of stdout" \
713 "\n bs=N Read and write N bytes at a time" \
714 IF_FEATURE_DD_IBS_OBS( \
715 "\n ibs=N Read N bytes at a time" \
717 IF_FEATURE_DD_IBS_OBS( \
718 "\n obs=N Write N bytes at a time" \
720 "\n count=N Copy only N input blocks" \
721 "\n skip=N Skip N input blocks" \
722 "\n seek=N Skip N output blocks" \
723 IF_FEATURE_DD_IBS_OBS( \
724 "\n conv=notrunc Don't truncate output file" \
725 "\n conv=noerror Continue after read errors" \
726 "\n conv=sync Pad blocks with zeros" \
727 "\n conv=fsync Physically write data out before finishing" \
730 "\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \
731 "\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \
733 #define dd_example_usage \
734 "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
738 #define deallocvt_trivial_usage \
740 #define deallocvt_full_usage "\n\n" \
741 "Deallocate unused virtual terminal /dev/ttyN"
743 #define delgroup_trivial_usage \
744 IF_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
745 #define delgroup_full_usage "\n\n" \
746 "Delete group GROUP from the system" \
747 IF_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
749 #define deluser_trivial_usage \
751 #define deluser_full_usage "\n\n" \
752 "Delete USER from the system"
754 #define devmem_trivial_usage \
755 "ADDRESS [WIDTH [VALUE]]"
757 #define devmem_full_usage "\n\n" \
758 "Read/write from physical address\n" \
759 "\n ADDRESS Address to act upon" \
760 "\n WIDTH Width (8/16/...)" \
761 "\n VALUE Data to be written" \
763 #define devfsd_trivial_usage \
764 "mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]")
765 #define devfsd_full_usage "\n\n" \
766 "Manage devfs permissions and old device name symlinks\n" \
768 "\n mntpnt The mount point where devfs is mounted" \
769 "\n -v Print the protocol version numbers for devfsd" \
770 "\n and the kernel-side protocol version and exit" \
772 "\n -fg Run in foreground" \
773 "\n -np Exit after parsing the configuration file" \
774 "\n and processing synthetic REGISTER events," \
775 "\n don't poll for events" \
778 #define df_trivial_usage \
780 IF_FEATURE_HUMAN_READABLE("mh") \
781 IF_FEATURE_DF_FANCY("ai] [-B SIZE") \
783 #define df_full_usage "\n\n" \
784 "Print filesystem usage statistics\n" \
786 "\n -P POSIX output format" \
787 "\n -k 1024-byte blocks (default)" \
788 IF_FEATURE_HUMAN_READABLE( \
789 "\n -m 1M-byte blocks" \
790 "\n -h Human readable (e.g. 1K 243M 2G)" \
792 IF_FEATURE_DF_FANCY( \
793 "\n -a Show all filesystems" \
795 "\n -B SIZE Blocksize" \
798 #define df_example_usage \
800 "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
801 "/dev/sda3 8690864 8553540 137324 98% /\n" \
802 "/dev/sda1 64216 36364 27852 57% /boot\n" \
804 "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
805 "/dev/sda3 8690864 8553540 137324 98% /\n" \
806 "$ POSIXLY_CORRECT=sure df /dev/sda3\n" \
807 "Filesystem 512B-blocks Used Available Use% Mounted on\n" \
808 "/dev/sda3 17381728 17107080 274648 98% /\n" \
809 "$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \
810 "Filesystem 512-blocks Used Available Capacity Mounted on\n" \
811 "/dev/sda3 17381728 17107080 274648 98% /\n"
813 #define dhcprelay_trivial_usage \
814 "CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]"
815 #define dhcprelay_full_usage "\n\n" \
816 "Relay DHCP requests between clients and server" \
818 #define diff_trivial_usage \
819 "[-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
820 #define diff_full_usage "\n\n" \
821 "Compare files line by line and output the differences between them.\n" \
822 "This implementation supports unified diffs only.\n" \
824 "\n -a Treat all files as text" \
825 "\n -b Ignore changes in the amount of whitespace" \
826 "\n -B Ignore changes whose lines are all blank" \
827 "\n -d Try hard to find a smaller set of changes" \
828 "\n -i Ignore case differences" \
829 "\n -L Use LABEL instead of the filename in the unified header" \
830 "\n -N Treat absent files as empty" \
831 "\n -q Output only whether files differ" \
833 "\n -S Start with FILE when comparing directories" \
834 "\n -T Make tabs line up by prefixing a tab when necessary" \
835 "\n -s Report when two files are the same" \
836 "\n -t Expand tabs to spaces in output" \
837 "\n -U Output LINES lines of context" \
838 "\n -w Ignore all whitespace" \
840 #define dirname_trivial_usage \
842 #define dirname_full_usage "\n\n" \
843 "Strip non-directory suffix from FILENAME"
844 #define dirname_example_usage \
845 "$ dirname /tmp/foo\n" \
847 "$ dirname /tmp/foo/\n" \
850 #define dmesg_trivial_usage \
851 "[-c] [-n LEVEL] [-s SIZE]"
852 #define dmesg_full_usage "\n\n" \
853 "Print or control the kernel ring buffer\n" \
855 "\n -c Clear ring buffer after printing" \
856 "\n -n LEVEL Set console logging level" \
857 "\n -s SIZE Buffer size" \
859 #define dnsd_trivial_usage \
860 "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]"
861 #define dnsd_full_usage "\n\n" \
862 "Small static DNS server daemon\n" \
864 "\n -c FILE Config file" \
866 "\n -p PORT Listen on PORT" \
867 "\n -i ADDR Listen on ADDR" \
870 "\n -s Send successful replies only. Use this if you want" \
871 "\n to use /etc/resolv.conf with two nameserver lines:" \
872 "\n nameserver DNSD_SERVER" \
873 "\n nameserver NORNAL_DNS_SERVER" \
875 #define dos2unix_trivial_usage \
877 #define dos2unix_full_usage "\n\n" \
878 "Convert FILE in-place from DOS to Unix format.\n" \
879 "When no file is given, use stdin/stdout.\n" \
884 #define unix2dos_trivial_usage \
886 #define unix2dos_full_usage "\n\n" \
887 "Convert FILE in-place from Unix to DOS format.\n" \
888 "When no file is given, use stdin/stdout.\n" \
893 #define dpkg_trivial_usage \
894 "[-ilCPru] [-F OPT] PACKAGE"
895 #define dpkg_full_usage "\n\n" \
896 "Install, remove and manage Debian packages\n" \
899 "\n -i,--install Install the package" \
900 "\n -l,--list List of installed packages" \
901 "\n --configure Configure an unpackaged package" \
902 "\n -P,--purge Purge all files of a package" \
903 "\n -r,--remove Remove all but the configuration files for a package" \
904 "\n --unpack Unpack a package, but don't configure it" \
905 "\n --force-depends Ignore dependency problems" \
906 "\n --force-confnew Overwrite existing config files when installing" \
907 "\n --force-confold Keep old config files when installing" \
910 "\n -i Install the package" \
911 "\n -l List of installed packages" \
912 "\n -C Configure an unpackaged package" \
913 "\n -P Purge all files of a package" \
914 "\n -r Remove all but the configuration files for a package" \
915 "\n -u Unpack a package, but don't configure it" \
916 "\n -F depends Ignore dependency problems" \
917 "\n -F confnew Overwrite existing config files when installing" \
918 "\n -F confold Keep old config files when installing" \
921 #define dpkg_deb_trivial_usage \
922 "[-cefxX] FILE [argument]"
923 #define dpkg_deb_full_usage "\n\n" \
924 "Perform actions on Debian packages (.debs)\n" \
926 "\n -c List contents of filesystem tree" \
927 "\n -e Extract control files to [argument] directory" \
928 "\n -f Display control field name starting with [argument]" \
929 "\n -x Extract packages filesystem tree to directory" \
930 "\n -X Verbose extract" \
932 #define dpkg_deb_example_usage \
933 "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
935 #define du_trivial_usage \
936 "[-aHLdclsx" IF_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
937 #define du_full_usage "\n\n" \
938 "Summarize disk space used for each FILE and/or directory.\n" \
939 "Disk space is printed in units of " \
940 IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
941 IF_NOT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
944 "\n -a Show file sizes too" \
945 "\n -L Follow all symlinks" \
946 "\n -H Follow symlinks on command line" \
947 "\n -d N Limit output to directories (and files with -a) of depth < N" \
948 "\n -c Show grand total" \
949 "\n -l Count sizes many times if hard linked" \
950 "\n -s Display only a total for each argument" \
951 "\n -x Skip directories on different filesystems" \
952 IF_FEATURE_HUMAN_READABLE( \
953 "\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \
954 "\n -m Sizes in megabytes" \
956 "\n -k Sizes in kilobytes" \
957 IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \
959 #define du_example_usage \
962 "12 ./kernel-patches/CVS\n" \
963 "80 ./kernel-patches\n" \
966 "12 ./scripts/CVS\n" \
972 #define dumpkmap_trivial_usage \
974 #define dumpkmap_full_usage "\n\n" \
975 "Print a binary keyboard translation table to stdout"
976 #define dumpkmap_example_usage \
977 "$ dumpkmap > keymap\n"
979 #define dumpleases_trivial_usage \
980 "[-r|-a] [-f LEASEFILE]"
981 #define dumpleases_full_usage "\n\n" \
982 "Display DHCP leases granted by udhcpd\n" \
985 "\n -f,--file=FILE Lease file" \
986 "\n -r,--remaining Show remaining time" \
987 "\n -a,--absolute Show expiration time" \
990 "\n -f FILE Lease file" \
991 "\n -r Show remaining time" \
992 "\n -a Show expiration time" \
996 #define e2fsck_trivial_usage \
997 "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
998 "[-I inode_buffer_blocks] [-P process_inode_size] " \
999 "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
1000 "[-E extended-options] device"
1001 #define e2fsck_full_usage "\n\n" \
1002 "Check ext2/ext3 file system\n" \
1004 "\n -p Automatic repair (no questions)" \
1005 "\n -n Make no changes to the filesystem" \
1006 "\n -y Assume 'yes' to all questions" \
1007 "\n -c Check for bad blocks and add them to the badblock list" \
1008 "\n -f Force checking even if filesystem is marked clean" \
1010 "\n -b superblock Use alternative superblock" \
1011 "\n -B blocksize Force blocksize when looking for superblock" \
1012 "\n -j journal Set location of the external journal" \
1013 "\n -l file Add to badblocks list" \
1014 "\n -L file Set badblocks list" \
1017 #define echo_trivial_usage \
1018 IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG]..."
1019 #define echo_full_usage "\n\n" \
1020 "Print the specified ARGs to stdout" \
1021 IF_FEATURE_FANCY_ECHO( "\n" \
1023 "\n -n Suppress trailing newline" \
1024 "\n -e Interpret backslash escapes (i.e., \\t=tab)" \
1025 "\n -E Don't interpret backslash escapes (default)" \
1027 #define echo_example_usage \
1028 "$ echo \"Erik is cool\"\n" \
1030 IF_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
1034 "$ echo \"Erik\\nis\\ncool\"\n" \
1035 "Erik\\nis\\ncool\n")
1037 #define eject_trivial_usage \
1038 "[-t] [-T] [DEVICE]"
1039 #define eject_full_usage "\n\n" \
1040 "Eject DEVICE or default /dev/cdrom\n" \
1042 IF_FEATURE_EJECT_SCSI( \
1043 "\n -s SCSI device" \
1045 "\n -t Close tray" \
1046 "\n -T Open/close tray (toggle)" \
1048 #define ed_trivial_usage ""
1049 #define ed_full_usage ""
1051 #define env_trivial_usage \
1052 "[-iu] [-] [name=value]... [PROG ARGS]"
1053 #define env_full_usage "\n\n" \
1054 "Print the current environment or run PROG after setting up\n" \
1055 "the specified environment\n" \
1057 "\n -, -i Start with an empty environment" \
1058 "\n -u Remove variable from the environment" \
1060 #define ether_wake_trivial_usage \
1061 "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
1062 #define ether_wake_full_usage "\n\n" \
1063 "Send a magic packet to wake up sleeping machines.\n" \
1064 "MAC must be a station address (00:11:22:33:44:55) or\n" \
1065 "a hostname with a known 'ethers' entry.\n" \
1067 "\n -b Send wake-up packet to the broadcast address" \
1068 "\n -i iface Interface to use (default eth0)" \
1069 "\n -p pass Append four or six byte password PW to the packet" \
1071 #define expand_trivial_usage \
1072 "[-i] [-t N] [FILE]..."
1073 #define expand_full_usage "\n\n" \
1074 "Convert tabs to spaces, writing to stdout\n" \
1076 IF_FEATURE_EXPAND_LONG_OPTIONS( \
1077 "\n -i,--initial Don't convert tabs after non blanks" \
1078 "\n -t,--tabs=N Tabstops every N chars" \
1080 IF_NOT_FEATURE_EXPAND_LONG_OPTIONS( \
1081 "\n -i Don't convert tabs after non blanks" \
1082 "\n -t Tabstops every N chars" \
1085 #define expr_trivial_usage \
1087 #define expr_full_usage "\n\n" \
1088 "Print the value of EXPRESSION to stdout\n" \
1090 "EXPRESSION may be:\n" \
1091 " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
1092 " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
1093 " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \
1099 " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \
1104 " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
1105 " match STRING REGEXP Same as STRING : REGEXP\n" \
1106 " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
1107 " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
1108 " length STRING Length of STRING\n" \
1109 " quote TOKEN Interpret TOKEN as a string, even if\n" \
1110 " it is a keyword like 'match' or an\n" \
1111 " operator like '/'\n" \
1112 " (EXPRESSION) Value of EXPRESSION\n" \
1114 "Beware that many operators need to be escaped or quoted for shells.\n" \
1115 "Comparisons are arithmetic if both ARGs are numbers, else\n" \
1116 "lexicographical. Pattern matches return the string matched between\n" \
1117 "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
1118 "of characters matched or 0."
1120 #define fakeidentd_trivial_usage \
1121 "[-fiw] [-b ADDR] [STRING]"
1122 #define fakeidentd_full_usage "\n\n" \
1123 "Provide fake ident (auth) service\n" \
1125 "\n -f Run in foreground" \
1126 "\n -i Inetd mode" \
1127 "\n -w Inetd 'wait' mode" \
1128 "\n -b ADDR Bind to specified address" \
1129 "\n STRING Ident answer string (default: nobody)" \
1131 #define false_trivial_usage \
1133 #define false_full_usage "\n\n" \
1134 "Return an exit code of FALSE (1)"
1136 #define false_example_usage \
1141 #define fbsplash_trivial_usage \
1142 "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
1143 #define fbsplash_full_usage "\n\n" \
1146 "\n -c Hide cursor" \
1147 "\n -d Framebuffer device (default /dev/fb0)" \
1148 "\n -i Config file (var=value):" \
1149 "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
1150 "\n BAR_R,BAR_G,BAR_B" \
1151 "\n -f Control pipe (else exit after drawing image)" \
1152 "\n commands: 'NN' (% for progress bar) or 'exit'" \
1154 #define fbset_trivial_usage \
1156 #define fbset_full_usage "\n\n" \
1157 "Show and modify frame buffer settings"
1159 #define fbset_example_usage \
1161 "mode \"1024x768-76\"\n" \
1162 " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
1163 " geometry 1024 768 1024 768 16\n" \
1164 " timings 12714 128 32 16 4 128 4\n" \
1166 " rgba 5/11,6/5,5/0,0/0\n" \
1169 #define fdflush_trivial_usage \
1171 #define fdflush_full_usage "\n\n" \
1172 "Force floppy disk drive to detect disk change"
1174 #define fdformat_trivial_usage \
1176 #define fdformat_full_usage "\n\n" \
1177 "Format floppy disk\n" \
1179 "\n -n Don't verify after format" \
1181 /* Looks like someone forgot to add this to config system */
1182 #ifndef ENABLE_FEATURE_FDISK_BLKSIZE
1183 # define ENABLE_FEATURE_FDISK_BLKSIZE 0
1184 # define IF_FEATURE_FDISK_BLKSIZE(a)
1187 #define fdisk_trivial_usage \
1188 "[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " \
1189 "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
1190 #define fdisk_full_usage "\n\n" \
1191 "Change partition table\n" \
1193 "\n -u Start and End are in sectors (instead of cylinders)" \
1194 "\n -l Show partition table for each DISK, then exit" \
1195 IF_FEATURE_FDISK_BLKSIZE( \
1196 "\n -s Show partition sizes in kb for each DISK, then exit" \
1198 "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
1199 "\n -C CYLINDERS Set number of cylinders/heads/sectors" \
1203 #define fgconsole_trivial_usage \
1205 #define fgconsole_full_usage "\n\n" \
1206 "Get active console"
1208 #define findfs_trivial_usage \
1209 "LABEL=label or UUID=uuid"
1210 #define findfs_full_usage "\n\n" \
1211 "Find a filesystem device based on a label or UUID"
1212 #define findfs_example_usage \
1213 "$ findfs LABEL=MyDevice"
1215 #define flash_lock_trivial_usage \
1216 "MTD_DEVICE OFFSET SECTORS"
1217 #define flash_lock_full_usage "\n\n" \
1218 "Lock part or all of an MTD device. If SECTORS is -1, then all sectors\n" \
1219 "will be locked, regardless of the value of OFFSET"
1221 #define flash_unlock_trivial_usage \
1223 #define flash_unlock_full_usage "\n\n" \
1224 "Unlock an MTD device"
1226 #define flash_eraseall_trivial_usage \
1228 #define flash_eraseall_full_usage "\n\n" \
1229 "Erase an MTD device\n" \
1231 "\n -j Format the device for jffs2" \
1232 "\n -q Don't display progress messages" \
1234 #define flashcp_trivial_usage \
1235 "-v FILE MTD_DEVICE"
1236 #define flashcp_full_usage "\n\n" \
1237 "Copy an image to MTD device\n" \
1241 #define flock_trivial_usage \
1242 "[-sxun] FD|{FILE [-c] PROG ARGS}"
1243 #define flock_full_usage "\n\n" \
1244 "[Un]lock file descriptor, or lock FILE, run PROG\n" \
1246 "\n -s Shared lock" \
1247 "\n -x Exclusive lock (default)" \
1249 "\n -n Fail rather than wait" \
1251 #define fold_trivial_usage \
1252 "[-bs] [-w WIDTH] [FILE]..."
1253 #define fold_full_usage "\n\n" \
1254 "Wrap input lines in each FILE (or stdin), writing to stdout\n" \
1256 "\n -b Count bytes rather than columns" \
1257 "\n -s Break at spaces" \
1258 "\n -w Use WIDTH columns instead of 80" \
1260 #define free_trivial_usage \
1261 "" IF_DESKTOP("[-b/k/m/g]")
1262 #define free_full_usage "\n\n" \
1263 "Display the amount of free and used system memory"
1264 #define free_example_usage \
1266 " total used free shared buffers\n" \
1267 " Mem: 257628 248724 8904 59644 93124\n" \
1268 " Swap: 128516 8404 120112\n" \
1269 "Total: 386144 257128 129016\n" \
1271 #define freeramdisk_trivial_usage \
1273 #define freeramdisk_full_usage "\n\n" \
1274 "Free all memory used by the specified ramdisk"
1275 #define freeramdisk_example_usage \
1276 "$ freeramdisk /dev/ram2\n"
1278 #define fsck_trivial_usage \
1279 "[-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]..."
1280 #define fsck_full_usage "\n\n" \
1281 "Check and repair filesystems\n" \
1283 "\n -A Walk /etc/fstab and check all filesystems" \
1284 "\n -N Don't execute, just show what would be done" \
1285 "\n -P With -A, check filesystems in parallel" \
1286 "\n -R With -A, skip the root filesystem" \
1287 "\n -T Don't show title on startup" \
1289 "\n -C n Write status information to specified filedescriptor" \
1290 "\n -t TYPE List of filesystem types to check" \
1292 #define fsck_minix_trivial_usage \
1293 "[-larvsmf] BLOCKDEV"
1294 #define fsck_minix_full_usage "\n\n" \
1295 "Check MINIX filesystem\n" \
1297 "\n -l List all filenames" \
1298 "\n -r Perform interactive repairs" \
1299 "\n -a Perform automatic repairs" \
1301 "\n -s Output superblock information" \
1302 "\n -m Show \"mode not cleared\" warnings" \
1303 "\n -f Force file system check" \
1305 #define ftpd_trivial_usage \
1306 "[-wvS] [-t N] [-T N] [DIR]"
1307 #define ftpd_full_usage "\n\n" \
1308 "Anonymous FTP server\n" \
1310 "ftpd should be used as an inetd service.\n" \
1311 "ftpd's line for inetd.conf:\n" \
1312 " 21 stream tcp nowait root ftpd ftpd /files/to/serve\n" \
1313 "It also can be ran from tcpsvd:\n" \
1314 " tcpsvd -vE 0.0.0.0 21 ftpd /files/to/serve\n" \
1316 "\n -w Allow upload" \
1317 "\n -v Log to stderr" \
1318 "\n -S Log to syslog" \
1319 "\n -t,-T Idle and absolute timeouts" \
1320 "\n DIR Change root to this directory" \
1322 #define ftpget_trivial_usage \
1323 "[OPTIONS] HOST [LOCAL_FILE] REMOTE_FILE"
1324 #define ftpget_full_usage "\n\n" \
1325 "Retrieve a remote file via FTP\n" \
1327 IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1328 "\n -c,--continue Continue previous transfer" \
1329 "\n -v,--verbose Verbose" \
1330 "\n -u,--username Username" \
1331 "\n -p,--password Password" \
1332 "\n -P,--port Port number" \
1334 IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1335 "\n -c Continue previous transfer" \
1339 "\n -P Port number" \
1342 #define ftpput_trivial_usage \
1343 "[OPTIONS] HOST [REMOTE_FILE] LOCAL_FILE"
1344 #define ftpput_full_usage "\n\n" \
1345 "Store a local file on a remote machine via FTP\n" \
1347 IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1348 "\n -v,--verbose Verbose" \
1349 "\n -u,--username Username" \
1350 "\n -p,--password Password" \
1351 "\n -P,--port Port number" \
1353 IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
1357 "\n -P Port number" \
1360 #define fuser_trivial_usage \
1361 "[OPTIONS] FILE or PORT/PROTO"
1362 #define fuser_full_usage "\n\n" \
1363 "Find processes which use FILEs or PORTs\n" \
1365 "\n -m Find processes which use same fs as FILEs" \
1366 "\n -4,-6 Search only IPv4/IPv6 space" \
1367 "\n -s Don't display PIDs" \
1368 "\n -k Kill found processes" \
1369 "\n -SIGNAL Signal to send (default: KILL)" \
1371 #define getenforce_trivial_usage NOUSAGE_STR
1372 #define getenforce_full_usage ""
1374 #define getopt_trivial_usage \
1376 #define getopt_full_usage "\n\n" \
1379 "\n -a,--alternative Allow long options starting with single -" \
1380 "\n -l,--longoptions=longopts Long options to be recognized" \
1381 "\n -n,--name=progname The name under which errors are reported" \
1382 "\n -o,--options=optstring Short options to be recognized" \
1383 "\n -q,--quiet Disable error reporting by getopt(3)" \
1384 "\n -Q,--quiet-output No normal output" \
1385 "\n -s,--shell=shell Set shell quoting conventions" \
1386 "\n -T,--test Test for getopt(1) version" \
1387 "\n -u,--unquoted Don't quote the output" \
1390 "\n -a Allow long options starting with single -" \
1391 "\n -l longopts Long options to be recognized" \
1392 "\n -n progname The name under which errors are reported" \
1393 "\n -o optstring Short options to be recognized" \
1394 "\n -q Disable error reporting by getopt(3)" \
1395 "\n -Q No normal output" \
1396 "\n -s shell Set shell quoting conventions" \
1397 "\n -T Test for getopt(1) version" \
1398 "\n -u Don't quote the output" \
1400 #define getopt_example_usage \
1401 "$ cat getopt.test\n" \
1403 "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
1404 " -n 'example.busybox' -- \"$@\"`\n" \
1405 "if [ $? != 0 ]; then exit 1; fi\n" \
1406 "eval set -- \"$GETOPT\"\n" \
1407 "while true; do\n" \
1409 " -a|--a-long) echo \"Option a\"; shift;;\n" \
1410 " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \
1412 " case \"$2\" in\n" \
1413 " \"\") echo \"Option c, no argument\"; shift 2;;\n" \
1414 " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \
1416 " --) shift; break;;\n" \
1417 " *) echo \"Internal error!\"; exit 1;;\n" \
1421 #define getsebool_trivial_usage \
1422 "-a or getsebool boolean..."
1423 #define getsebool_full_usage "\n\n" \
1424 " -a Show all selinux booleans"
1426 #define getty_trivial_usage \
1427 "[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
1428 #define getty_full_usage "\n\n" \
1429 "Open a tty, prompt for a login name, then invoke /bin/login\n" \
1431 "\n -h Enable hardware (RTS/CTS) flow control" \
1432 "\n -i Don't display /etc/issue before running login" \
1433 "\n -L Local line, don't do carrier detect" \
1434 "\n -m Get baud rate from modem's CONNECT status message" \
1435 "\n -w Wait for a CR or LF before sending /etc/issue" \
1436 "\n -n Don't prompt the user for a login name" \
1437 "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
1438 "\n -l LOGIN Invoke LOGIN instead of /bin/login" \
1439 "\n -t SEC Terminate after SEC if no username is read" \
1440 "\n -I INITSTR Send INITSTR before anything else" \
1441 "\n -H HOST Log HOST into the utmp file as the hostname" \
1443 #define gunzip_trivial_usage \
1445 #define gunzip_full_usage "\n\n" \
1446 "Decompress FILEs (or stdin)\n" \
1448 "\n -c Write to stdout" \
1450 "\n -t Test file integrity" \
1452 #define gunzip_example_usage \
1453 "$ ls -la /tmp/BusyBox*\n" \
1454 "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
1455 "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
1456 "$ ls -la /tmp/BusyBox*\n" \
1457 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
1459 #define gzip_trivial_usage \
1461 #define gzip_full_usage "\n\n" \
1462 "Compress FILEs (or stdin)\n" \
1464 "\n -d Decompress" \
1465 "\n -c Write to stdout" \
1468 #define gzip_example_usage \
1469 "$ ls -la /tmp/busybox*\n" \
1470 "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
1471 "$ gzip /tmp/busybox.tar\n" \
1472 "$ ls -la /tmp/busybox*\n" \
1473 "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
1475 #define hdparm_trivial_usage \
1476 "[OPTIONS] [DEVICE]"
1477 #define hdparm_full_usage "\n\n" \
1479 "\n -a Get/set fs readahead" \
1480 "\n -A Set drive read-lookahead flag (0/1)" \
1481 "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \
1482 "\n -B Set Advanced Power Management setting (1-255)" \
1483 "\n -c Get/set IDE 32-bit IO setting" \
1484 "\n -C Check IDE power mode status" \
1485 IF_FEATURE_HDPARM_HDIO_GETSET_DMA( \
1486 "\n -d Get/set using_dma flag") \
1487 "\n -D Enable/disable drive defect-mgmt" \
1488 "\n -f Flush buffer cache for device on exit" \
1489 "\n -g Display drive geometry" \
1490 "\n -h Display terse usage information" \
1491 IF_FEATURE_HDPARM_GET_IDENTITY( \
1492 "\n -i Display drive identification") \
1493 IF_FEATURE_HDPARM_GET_IDENTITY( \
1494 "\n -I Detailed/current information directly from drive") \
1495 "\n -k Get/set keep_settings_over_reset flag (0/1)" \
1496 "\n -K Set drive keep_features_over_reset flag (0/1)" \
1497 "\n -L Set drive doorlock (0/1) (removable harddisks only)" \
1498 "\n -m Get/set multiple sector count" \
1499 "\n -n Get/set ignore-write-errors flag (0/1)" \
1500 "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \
1501 "\n -P Set drive prefetch count" \
1502 /* "\n -q Change next setting quietly" - not supported ib bbox */ \
1503 "\n -Q Get/set DMA tagged-queuing depth (if supported)" \
1504 "\n -r Get/set readonly flag (DANGEROUS to set)" \
1505 IF_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
1506 "\n -R Register an IDE interface (DANGEROUS)") \
1507 "\n -S Set standby (spindown) timeout" \
1508 "\n -t Perform device read timings" \
1509 "\n -T Perform cache read timings" \
1510 "\n -u Get/set unmaskirq flag (0/1)" \
1511 IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
1512 "\n -U Unregister an IDE interface (DANGEROUS)") \
1513 "\n -v Defaults; same as -mcudkrag for IDE drives" \
1514 "\n -V Display program version and exit immediately" \
1515 IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
1516 "\n -w Perform device reset (DANGEROUS)") \
1517 "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \
1518 IF_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
1519 "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \
1520 "\n -X Set IDE xfer mode (DANGEROUS)" \
1521 "\n -y Put IDE drive in standby mode" \
1522 "\n -Y Put IDE drive to sleep" \
1523 "\n -Z Disable Seagate auto-powersaving mode" \
1524 "\n -z Reread partition table" \
1526 #define head_trivial_usage \
1527 "[OPTIONS] [FILE]..."
1528 #define head_full_usage "\n\n" \
1529 "Print first 10 lines of each FILE (or stdin) to stdout.\n" \
1530 "With more than one FILE, precede each with a filename header.\n" \
1532 "\n -n N[kbm] Print first N lines" \
1533 IF_FEATURE_FANCY_HEAD( \
1534 "\n -c N[kbm] Print first N bytes" \
1535 "\n -q Never print headers" \
1536 "\n -v Always print headers" \
1539 "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
1541 #define head_example_usage \
1542 "$ head -n 2 /etc/passwd\n" \
1543 "root:x:0:0:root:/root:/bin/bash\n" \
1544 "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
1546 #define tail_trivial_usage \
1547 "[OPTIONS] [FILE]..."
1548 #define tail_full_usage "\n\n" \
1549 "Print last 10 lines of each FILE (or stdin) to stdout.\n" \
1550 "With more than one FILE, precede each with a filename header.\n" \
1552 "\n -f Print data as file grows" \
1553 IF_FEATURE_FANCY_TAIL( \
1554 "\n -s SECONDS Wait SECONDS between reads with -f" \
1556 "\n -n N[kbm] Print last N lines" \
1557 IF_FEATURE_FANCY_TAIL( \
1558 "\n -c N[kbm] Print last N bytes" \
1559 "\n -q Never print headers" \
1560 "\n -v Always print headers" \
1562 "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
1563 "\nIf N starts with a '+', output begins with the Nth item from the start" \
1564 "\nof each file, not from the end." \
1567 #define tail_example_usage \
1568 "$ tail -n 1 /etc/resolv.conf\n" \
1569 "nameserver 10.0.0.1\n"
1571 #define hexdump_trivial_usage \
1572 "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..."
1573 #define hexdump_full_usage "\n\n" \
1574 "Display FILEs (or stdin) in a user specified format\n" \
1576 "\n -b One-byte octal display" \
1577 "\n -c One-byte character display" \
1578 "\n -C Canonical hex+ASCII, 16 bytes per line" \
1579 "\n -d Two-byte decimal display" \
1580 "\n -e FORMAT_STRING" \
1581 "\n -f FORMAT_FILE" \
1582 "\n -n LENGTH Interpret only LENGTH bytes of input" \
1583 "\n -o Two-byte octal display" \
1584 "\n -s OFFSET Skip OFFSET bytes" \
1585 "\n -v Display all input data" \
1586 "\n -x Two-byte hexadecimal display" \
1587 IF_FEATURE_HEXDUMP_REVERSE( \
1588 "\n -R Reverse of 'hexdump -Cv'") \
1590 #define hd_trivial_usage \
1592 #define hd_full_usage "\n\n" \
1593 "hd is an alias for hexdump -C"
1595 #define hostid_trivial_usage \
1597 #define hostid_full_usage "\n\n" \
1598 "Print out a unique 32-bit identifier for the machine"
1600 #define hostname_trivial_usage \
1601 "[OPTIONS] [HOSTNAME | -F FILE]"
1602 #define hostname_full_usage "\n\n" \
1603 "Get or set hostname or DNS domain name\n" \
1606 "\n -i Addresses for the hostname" \
1607 "\n -d DNS domain name" \
1608 "\n -f Fully qualified domain name" \
1609 "\n -F FILE Use FILE's content as hostname" \
1611 #define hostname_example_usage \
1615 #define dnsdomainname_trivial_usage NOUSAGE_STR
1616 #define dnsdomainname_full_usage ""
1618 #define httpd_trivial_usage \
1622 IF_FEATURE_HTTPD_SETUID(" [-u USER[:GRP]]") \
1623 IF_FEATURE_HTTPD_BASIC_AUTH(" [-r REALM]") \
1625 "or httpd -d/-e" IF_FEATURE_HTTPD_AUTH_MD5("/-m") " STRING"
1626 #define httpd_full_usage "\n\n" \
1627 "Listen for incoming HTTP requests\n" \
1629 "\n -i Inetd mode" \
1630 "\n -f Don't daemonize" \
1631 "\n -v[v] Verbose" \
1632 "\n -p [IP:]PORT Bind to IP:PORT (default *:80)" \
1633 IF_FEATURE_HTTPD_SETUID( \
1634 "\n -u USER[:GRP] Set uid/gid after binding to port") \
1635 IF_FEATURE_HTTPD_BASIC_AUTH( \
1636 "\n -r REALM Authentication Realm for Basic Authentication") \
1637 "\n -h HOME Home directory (default .)" \
1638 "\n -c FILE Configuration file (default {/etc,HOME}/httpd.conf)" \
1639 IF_FEATURE_HTTPD_AUTH_MD5( \
1640 "\n -m STRING MD5 crypt STRING") \
1641 "\n -e STRING HTML encode STRING" \
1642 "\n -d STRING URL decode STRING" \
1644 #define hwclock_trivial_usage \
1645 IF_FEATURE_HWCLOCK_LONG_OPTIONS( \
1646 "[-r|--show] [-s|--hctosys] [-w|--systohc]" \
1647 " [-l|--localtime] [-u|--utc]" \
1650 IF_NOT_FEATURE_HWCLOCK_LONG_OPTIONS( \
1651 "[-r] [-s] [-w] [-l] [-u] [-f FILE]" \
1653 #define hwclock_full_usage "\n\n" \
1654 "Query and set hardware clock (RTC)\n" \
1656 "\n -r Show hardware clock time" \
1657 "\n -s Set system time from hardware clock" \
1658 "\n -w Set hardware clock to system time" \
1659 "\n -u Hardware clock is in UTC" \
1660 "\n -l Hardware clock is in local time" \
1661 "\n -f FILE Use specified device (e.g. /dev/rtc2)" \
1663 #define id_trivial_usage \
1665 #define id_full_usage "\n\n" \
1666 "Print information about USER or the current user\n" \
1669 "\n -Z Security context" \
1673 "\n -G Supplementary group IDs" \
1674 "\n -n Print names instead of numbers" \
1675 "\n -r Print real ID instead of effective ID" \
1677 #define id_example_usage \
1679 "uid=1000(andersen) gid=1000(andersen)\n"
1681 #define ifconfig_trivial_usage \
1682 IF_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
1683 #define ifconfig_full_usage "\n\n" \
1684 "Configure a network interface\n" \
1688 " [add ADDRESS[/PREFIXLEN]]\n") \
1690 " [del ADDRESS[/PREFIXLEN]]\n") \
1691 " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \
1692 " [netmask ADDRESS] [dstaddr ADDRESS]\n" \
1693 IF_FEATURE_IFCONFIG_SLIP( \
1694 " [outfill NN] [keepalive NN]\n") \
1695 " " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \
1696 " [[-]trailers] [[-]arp] [[-]allmulti]\n" \
1697 " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \
1698 IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
1699 " [mem_start NN] [io_addr NN] [irq NN]\n") \
1702 #define ifenslave_trivial_usage \
1703 "[-cdf] MASTER_IFACE SLAVE_IFACE..."
1704 #define ifenslave_full_usage "\n\n" \
1705 "Configure network interfaces for parallel routing\n" \
1707 "\n -c,--change-active Change active slave" \
1708 "\n -d,--detach Remove slave interface from bonding device" \
1709 "\n -f,--force Force, even if interface is not Ethernet" \
1710 /* "\n -r,--receive-slave Create a receive-only slave" */
1712 #define ifenslave_example_usage \
1713 "To create a bond device, simply follow these three steps:\n" \
1714 "- ensure that the required drivers are properly loaded:\n" \
1715 " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \
1716 "- assign an IP address to the bond device:\n" \
1717 " # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n" \
1718 "- attach all the interfaces you need to the bond device:\n" \
1719 " # ifenslave bond0 eth0 eth1 eth2\n" \
1720 " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \
1721 " interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \
1722 " To detach a dead interface without setting the bond device down:\n" \
1723 " # ifenslave -d bond0 eth1\n\n" \
1724 " To set the bond device down and automatically release all the slaves:\n" \
1725 " # ifconfig bond0 down\n\n" \
1726 " To change active slave:\n" \
1727 " # ifenslave -c bond0 eth0\n" \
1729 #define ifplugd_trivial_usage \
1731 #define ifplugd_full_usage "\n\n" \
1732 "Network interface plug detection daemon\n" \
1734 "\n -n Don't daemonize" \
1735 "\n -s Don't log to syslog" \
1736 "\n -i IFACE Interface" \
1737 "\n -f/-F Treat link detection error as link down/link up" \
1738 "\n (otherwise exit on error)" \
1739 "\n -a Don't up interface at each link probe" \
1740 "\n -M Monitor creation/destruction of interface" \
1741 "\n (otherwise it must exist)" \
1742 "\n -r PROG Script to run" \
1743 "\n -x ARG Extra argument for script" \
1744 "\n -I Don't exit on nonzero exit code from script" \
1745 "\n -p Don't run script on daemon startup" \
1746 "\n -q Don't run script on daemon quit" \
1747 "\n -l Run script on startup even if no cable is detected" \
1748 "\n -t SECS Poll time in seconds" \
1749 "\n -u SECS Delay before running script after link up" \
1750 "\n -d SECS Delay after link down" \
1751 "\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)" \
1752 "\n -k Kill running daemon" \
1754 #define ifup_trivial_usage \
1755 "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..."
1756 #define ifup_full_usage "\n\n" \
1758 "\n -a De/configure all interfaces automatically" \
1759 "\n -i FILE Use FILE for interface definitions" \
1760 "\n -n Print out what would happen, but don't do it" \
1761 IF_FEATURE_IFUPDOWN_MAPPING( \
1762 "\n (note: doesn't disable mappings)" \
1763 "\n -m Don't run any mappings" \
1765 "\n -v Print out what would happen before doing it" \
1766 "\n -f Force de/configuration" \
1768 #define ifdown_trivial_usage \
1769 "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..."
1770 #define ifdown_full_usage "\n\n" \
1772 "\n -a De/configure all interfaces automatically" \
1773 "\n -i FILE Use FILE for interface definitions" \
1774 "\n -n Print out what would happen, but don't do it" \
1775 IF_FEATURE_IFUPDOWN_MAPPING( \
1776 "\n (note: doesn't disable mappings)" \
1777 "\n -m Don't run any mappings" \
1779 "\n -v Print out what would happen before doing it" \
1780 "\n -f Force de/configuration" \
1782 #define inetd_trivial_usage \
1783 "[-fe] [-q N] [-R N] [CONFFILE]"
1784 #define inetd_full_usage "\n\n" \
1785 "Listen for network connections and launch programs\n" \
1787 "\n -f Run in foreground" \
1788 "\n -e Log to stderr" \
1789 "\n -q N Socket listen queue (default: 128)" \
1790 "\n -R N Pause services after N connects/min" \
1791 "\n (default: 0 - disabled)" \
1793 #define inotifyd_trivial_usage \
1794 "PROG FILE1[:MASK]..."
1795 #define inotifyd_full_usage "\n\n" \
1796 "Run PROG on filesystem changes." \
1797 "\nWhen a filesystem event matching MASK occurs on FILEn," \
1798 "\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \
1800 "\n a File is accessed" \
1801 "\n c File is modified" \
1802 "\n e Metadata changed" \
1803 "\n w Writable file is closed" \
1804 "\n 0 Unwritable file is closed" \
1805 "\n r File is opened" \
1806 "\n D File is deleted" \
1807 "\n M File is moved" \
1808 "\n u Backing fs is unmounted" \
1809 "\n o Event queue overflowed" \
1810 "\n x File can't be watched anymore" \
1811 "\nIf watching a directory:" \
1812 "\n m Subfile is moved into dir" \
1813 "\n y Subfile is moved out of dir" \
1814 "\n n Subfile is created" \
1815 "\n d Subfile is deleted" \
1817 "\ninotifyd waits for PROG to exit." \
1818 "\nWhen x event happens for all FILEs, inotifyd exits." \
1820 /* -v, -b, -c are ignored */
1821 #define install_trivial_usage \
1822 "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [SOURCE]... DEST"
1823 #define install_full_usage "\n\n" \
1824 "Copy files and set attributes\n" \
1826 "\n -c Just copy (default)" \
1827 "\n -d Create directories" \
1828 "\n -D Create leading target directories" \
1829 "\n -s Strip symbol table" \
1830 "\n -p Preserve date" \
1831 "\n -o USER Set ownership" \
1832 "\n -g GRP Set group ownership" \
1833 "\n -m MODE Set permissions" \
1835 "\n -Z Set security context" \
1838 /* would need to make the " | " optional depending on more than one selected: */
1839 #define ip_trivial_usage \
1841 IF_FEATURE_IP_ADDRESS("address | ") \
1842 IF_FEATURE_IP_ROUTE("route | ") \
1843 IF_FEATURE_IP_LINK("link | ") \
1844 IF_FEATURE_IP_TUNNEL("tunnel | ") \
1845 IF_FEATURE_IP_RULE("rule") \
1847 #define ip_full_usage "\n\n" \
1848 "ip [OPTIONS] OBJECT {COMMAND}\n" \
1849 "where OBJECT := {" \
1850 IF_FEATURE_IP_ADDRESS("address | ") \
1851 IF_FEATURE_IP_ROUTE("route | ") \
1852 IF_FEATURE_IP_LINK("link | ") \
1853 IF_FEATURE_IP_TUNNEL("tunnel | ") \
1854 IF_FEATURE_IP_RULE("rule") \
1856 "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \
1858 #define ipaddr_trivial_usage \
1859 "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
1860 " [dev STRING] [to PREFIX] }"
1861 #define ipaddr_full_usage "\n\n" \
1862 "ipaddr {add|delete} IFADDR dev STRING\n" \
1863 "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \
1864 " [to PREFIX] [label PATTERN]\n" \
1865 " IFADDR := PREFIX | ADDR peer PREFIX\n" \
1866 " [broadcast ADDR] [anycast ADDR]\n" \
1867 " [label STRING] [scope SCOPE-ID]\n" \
1868 " SCOPE-ID := [host | link | global | NUMBER]" \
1870 #define ipcalc_trivial_usage \
1871 "[OPTIONS] ADDRESS[[/]NETMASK] [NETMASK]"
1872 #define ipcalc_full_usage "\n\n" \
1873 "Calculate IP network settings from a IP address\n" \
1875 IF_FEATURE_IPCALC_LONG_OPTIONS( \
1876 "\n -b,--broadcast Display calculated broadcast address" \
1877 "\n -n,--network Display calculated network address" \
1878 "\n -m,--netmask Display default netmask for IP" \
1879 IF_FEATURE_IPCALC_FANCY( \
1880 "\n -p,--prefix Display the prefix for IP/NETMASK" \
1881 "\n -h,--hostname Display first resolved host name" \
1882 "\n -s,--silent Don't ever display error messages" \
1885 IF_NOT_FEATURE_IPCALC_LONG_OPTIONS( \
1886 "\n -b Display calculated broadcast address" \
1887 "\n -n Display calculated network address" \
1888 "\n -m Display default netmask for IP" \
1889 IF_FEATURE_IPCALC_FANCY( \
1890 "\n -p Display the prefix for IP/NETMASK" \
1891 "\n -h Display first resolved host name" \
1892 "\n -s Don't ever display error messages" \
1896 #define ipcrm_trivial_usage \
1897 "[-MQS key] [-mqs id]"
1898 #define ipcrm_full_usage "\n\n" \
1899 "Upper-case options MQS remove an object by shmkey value.\n" \
1900 "Lower-case options remove an object by shmid value.\n" \
1902 "\n -mM Remove memory segment after last detach" \
1903 "\n -qQ Remove message queue" \
1904 "\n -sS Remove semaphore" \
1906 #define ipcs_trivial_usage \
1907 "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
1908 #define ipcs_full_usage "\n\n" \
1909 " -i Show specific resource" \
1910 "\nResource specification:" \
1911 "\n -m Shared memory segments" \
1912 "\n -q Message queues" \
1913 "\n -s Semaphore arrays" \
1914 "\n -a All (default)" \
1915 "\nOutput format:" \
1922 #define iplink_trivial_usage \
1923 "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
1924 #define iplink_full_usage "\n\n" \
1925 "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
1926 " dynamic { on | off } |\n" \
1928 "iplink show [DEVICE]" \
1930 #define iproute_trivial_usage \
1931 "{ list | flush | { add | del | change | append |\n" \
1932 " replace | monitor } ROUTE }"
1933 #define iproute_full_usage "\n\n" \
1934 "iproute { list | flush } SELECTOR\n" \
1935 "iproute get ADDRESS [from ADDRESS iif STRING]\n" \
1936 " [oif STRING] [tos TOS]\n" \
1937 "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
1938 " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
1939 " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]\n" \
1940 " [metric METRIC]" \
1942 #define iprule_trivial_usage \
1943 "{[list | add | del] RULE}"
1944 #define iprule_full_usage "\n\n" \
1945 "iprule [list | add | del] SELECTOR ACTION\n" \
1946 " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \
1947 " [dev STRING] [pref NUMBER]\n" \
1948 " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \
1949 " [prohibit | reject | unreachable]\n" \
1950 " [realms [SRCREALM/]DSTREALM]\n" \
1951 " TABLE_ID := [local | main | default | NUMBER]" \
1953 #define iptunnel_trivial_usage \
1954 "{ add | change | del | show } [NAME]\n" \
1955 " [mode { ipip | gre | sit }]\n" \
1956 " [remote ADDR] [local ADDR] [ttl TTL]"
1957 #define iptunnel_full_usage "\n\n" \
1958 "iptunnel { add | change | del | show } [NAME]\n" \
1959 " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
1960 " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
1961 " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \
1963 #define kbd_mode_trivial_usage \
1964 "[-a|k|s|u] [-C TTY]"
1965 #define kbd_mode_full_usage "\n\n" \
1966 "Report or set the keyboard mode\n" \
1968 "\n -a Default (ASCII)" \
1969 "\n -k Medium-raw (keyboard)" \
1970 "\n -s Raw (scancode)" \
1971 "\n -u Unicode (utf-8)" \
1972 "\n -C TTY Affect TTY instead of /dev/tty" \
1974 #define kill_trivial_usage \
1975 "[-l] [-SIG] PID..."
1976 #define kill_full_usage "\n\n" \
1977 "Send a signal (default: TERM) to given PIDs\n" \
1979 "\n -l List all signal names and numbers" \
1980 /* "\n -s SIG Yet another way of specifying SIG" */ \
1982 #define kill_example_usage \
1983 "$ ps | grep apache\n" \
1984 "252 root root S [apache]\n" \
1985 "263 www-data www-data S [apache]\n" \
1986 "264 www-data www-data S [apache]\n" \
1987 "265 www-data www-data S [apache]\n" \
1988 "266 www-data www-data S [apache]\n" \
1989 "267 www-data www-data S [apache]\n" \
1992 #define killall_trivial_usage \
1993 "[-l] [-q] [-SIG] PROCESS_NAME..."
1994 #define killall_full_usage "\n\n" \
1995 "Send a signal (default: TERM) to given processes\n" \
1997 "\n -l List all signal names and numbers" \
1998 /* "\n -s SIG Yet another way of specifying SIG" */ \
1999 "\n -q Don't complain if no processes were killed" \
2001 #define killall_example_usage \
2002 "$ killall apache\n"
2004 #define killall5_trivial_usage \
2005 "[-l] [-SIG] [-o PID]..."
2006 #define killall5_full_usage "\n\n" \
2007 "Send a signal (default: TERM) to all processes outside current session\n" \
2009 "\n -l List all signal names and numbers" \
2010 "\n -o PID Don't signal this PID" \
2011 /* "\n -s SIG Yet another way of specifying SIG" */ \
2013 #define klogd_trivial_usage \
2015 #define klogd_full_usage "\n\n" \
2018 "\n -c N Only messages with level < N are printed to console" \
2019 "\n -n Run in foreground" \
2021 #define length_trivial_usage \
2023 #define length_full_usage "\n\n" \
2024 "Print STRING's length"
2026 #define length_example_usage \
2027 "$ length Hello\n" \
2030 #define less_trivial_usage \
2031 "[-EMNmh~I?] [FILE]..."
2032 #define less_full_usage "\n\n" \
2033 "View FILE (or stdin) one screenful at a time\n" \
2035 "\n -E Quit once the end of a file is reached" \
2036 "\n -M,-m Display status line with line numbers" \
2037 "\n and percentage through the file" \
2038 "\n -N Prefix line number to each line" \
2039 "\n -I Ignore case in all searches" \
2040 "\n -~ Suppress ~s displayed past the end of the file" \
2042 #define linux32_trivial_usage NOUSAGE_STR
2043 #define linux32_full_usage ""
2044 #define linux64_trivial_usage NOUSAGE_STR
2045 #define linux64_full_usage ""
2047 #define setarch_trivial_usage \
2048 "personality PROG ARGS"
2049 #define setarch_full_usage "\n\n" \
2050 "Personality may be:\n" \
2051 " linux32 Set 32bit uname emulation\n" \
2052 " linux64 Set 64bit uname emulation" \
2054 #define ln_trivial_usage \
2055 "[OPTIONS] TARGET... LINK|DIR"
2056 #define ln_full_usage "\n\n" \
2057 "Create a link LINK or DIR/TARGET to the specified TARGET(s)\n" \
2059 "\n -s Make symlinks instead of hardlinks" \
2060 "\n -f Remove existing destinations" \
2061 "\n -n Don't dereference symlinks - treat like normal file" \
2062 "\n -b Make a backup of the target (if exists) before link operation" \
2063 "\n -S suf Use suffix instead of ~ when making backup files" \
2065 #define ln_example_usage \
2066 "$ ln -s BusyBox /tmp/ls\n" \
2067 "$ ls -l /tmp/ls\n" \
2068 "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
2070 #define load_policy_trivial_usage NOUSAGE_STR
2071 #define load_policy_full_usage ""
2073 #define loadfont_trivial_usage \
2075 #define loadfont_full_usage "\n\n" \
2076 "Load a console font from stdin" \
2077 /* "\n -C TTY Affect TTY instead of /dev/tty" */ \
2079 #define loadfont_example_usage \
2080 "$ loadfont < /etc/i18n/fontname\n"
2082 #define loadkmap_trivial_usage \
2084 #define loadkmap_full_usage "\n\n" \
2085 "Load a binary keyboard translation table from stdin\n" \
2086 /* "\n -C TTY Affect TTY instead of /dev/tty" */ \
2088 #define loadkmap_example_usage \
2089 "$ loadkmap < /etc/i18n/lang-keymap\n"
2091 #define logger_trivial_usage \
2092 "[OPTIONS] [MESSAGE]"
2093 #define logger_full_usage "\n\n" \
2094 "Write MESSAGE (or stdin) to syslog\n" \
2096 "\n -s Log to stderr as well as the system log" \
2097 "\n -t TAG Log using the specified tag (defaults to user name)" \
2098 "\n -p PRIO Priority (numeric or facility.level pair)" \
2100 #define logger_example_usage \
2101 "$ logger \"hello\"\n"
2103 #define login_trivial_usage \
2104 "[-p] [-h HOST] [[-f] USER]"
2105 #define login_full_usage "\n\n" \
2106 "Begin a new session on the system\n" \
2108 "\n -f Don't authenticate (user already authenticated)" \
2109 "\n -h Name of the remote host" \
2110 "\n -p Preserve environment" \
2112 #define logname_trivial_usage \
2114 #define logname_full_usage "\n\n" \
2115 "Print the name of the current user"
2116 #define logname_example_usage \
2120 #define logread_trivial_usage \
2122 #define logread_full_usage "\n\n" \
2123 "Show messages in syslogd's circular buffer\n" \
2125 "\n -f Output data as log grows" \
2127 #define losetup_trivial_usage \
2128 "[-o OFS] LOOPDEV FILE - associate loop devices\n" \
2129 " losetup -d LOOPDEV - disassociate\n" \
2130 " losetup [-f] - show"
2131 #define losetup_full_usage "\n\n" \
2133 "\n -o OFS Start OFS bytes into FILE" \
2134 "\n -f Show first free loop device" \
2136 #define losetup_notes_usage \
2137 "No arguments will display all current associations.\n" \
2138 "One argument (losetup /dev/loop1) will display the current association\n" \
2139 "(if any), or disassociate it (with -d). The display shows the offset\n" \
2140 "and filename of the file the loop device is currently bound to.\n\n" \
2141 "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
2142 "with an optional offset (-o 12345). Encryption is not yet supported.\n" \
2143 "losetup -f will show the first loop free loop device\n\n"
2145 #define lpd_trivial_usage \
2146 "SPOOLDIR [HELPER [ARGS]]"
2147 #define lpd_full_usage "\n\n" \
2148 "SPOOLDIR must contain (symlinks to) device nodes or directories" \
2149 "\nwith names matching print queue names. In the first case, jobs are" \
2150 "\nsent directly to the device. Otherwise each job is stored in queue" \
2151 "\ndirectory and HELPER program is called. Name of file to print" \
2152 "\nis passed in $DATAFILE variable." \
2154 "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \
2156 #define lpq_trivial_usage \
2157 "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]"
2158 #define lpq_full_usage "\n\n" \
2160 "\n -P lp service to connect to (else uses $PRINTER)" \
2161 "\n -d Delete jobs" \
2162 "\n -f Force any waiting job to be printed" \
2163 "\n -s Short display" \
2165 #define lpr_trivial_usage \
2166 "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]..."
2167 /* -C CLASS exists too, not shown.
2168 * CLASS is supposed to be printed on banner page, if one is requested */
2169 #define lpr_full_usage "\n\n" \
2171 "\n -P lp service to connect to (else uses $PRINTER)"\
2172 "\n -m Send mail on completion" \
2173 "\n -h Print banner page too" \
2176 #define lsattr_trivial_usage \
2177 "[-Radlv] [FILE]..."
2178 #define lsattr_full_usage "\n\n" \
2179 "List file attributes on an ext2 fs\n" \
2182 "\n -a Don't hide entries starting with ." \
2183 "\n -d List directory entries instead of contents" \
2184 "\n -l List long flag names" \
2185 "\n -v List the file's version/generation number" \
2187 #define lspci_trivial_usage \
2189 #define lspci_full_usage "\n\n" \
2190 "List all PCI devices" \
2192 "\n -m Parseable output" \
2193 "\n -k Show driver" \
2195 #define lsusb_trivial_usage NOUSAGE_STR
2196 #define lsusb_full_usage ""
2198 #if ENABLE_FEATURE_MAKEDEVS_LEAF
2199 #define makedevs_trivial_usage \
2200 "NAME TYPE MAJOR MINOR FIRST LAST [s]"
2201 #define makedevs_full_usage "\n\n" \
2202 "Create a range of block or character special files" \
2205 "\n b Block device" \
2206 "\n c Character device" \
2207 "\n f FIFO, MAJOR and MINOR are ignored" \
2209 "\nFIRST..LAST specify numbers appended to NAME." \
2210 "\nIf 's' is the last argument, the base device is created as well." \
2213 "\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \
2214 "\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
2215 #define makedevs_example_usage \
2216 "# makedevs /dev/ttyS c 4 66 2 63\n" \
2217 "[creates ttyS2-ttyS63]\n" \
2218 "# makedevs /dev/hda b 3 0 0 8 s\n" \
2219 "[creates hda,hda1-hda8]\n"
2222 #if ENABLE_FEATURE_MAKEDEVS_TABLE
2223 #define makedevs_trivial_usage \
2224 "[-d device_table] rootdir"
2225 #define makedevs_full_usage "\n\n" \
2226 "Create a range of special files as specified in a device table.\n" \
2227 "Device table entries take the form of:\n" \
2228 "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
2229 "Where name is the file name, type can be one of:\n" \
2230 " f Regular file\n" \
2232 " c Character device\n" \
2233 " b Block device\n" \
2234 " p Fifo (named pipe)\n" \
2235 "uid is the user id for the target file, gid is the group id for the\n" \
2236 "target file. The rest of the entries (major, minor, etc) apply to\n" \
2237 "to device special files. A '-' may be used for blank entries."
2238 #define makedevs_example_usage \
2240 "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
2241 "/dev d 755 0 0 - - - - -\n" \
2242 "/dev/console c 666 0 0 5 1 - - -\n" \
2243 "/dev/null c 666 0 0 1 3 0 0 -\n" \
2244 "/dev/zero c 666 0 0 1 5 0 0 -\n" \
2245 "/dev/hda b 640 0 0 3 0 0 0 -\n" \
2246 "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
2256 #define makemime_trivial_usage \
2257 "[OPTIONS] [FILE]..."
2258 #define makemime_full_usage "\n\n" \
2259 "Create multipart MIME-encoded message from FILEs\n" \
2260 /* "Transfer encoding is base64, disposition is inline (not attachment)\n" */ \
2262 "\n -o FILE Output. Default: stdout" \
2263 "\n -a HDR Add header. Examples:" \
2264 "\n \"From: user@host.org\", \"Date: `date -R`\"" \
2265 "\n -c CT Content type. Default: text/plain" \
2266 "\n -C CS Charset. Default: " CONFIG_FEATURE_MIME_CHARSET \
2267 /* "\n -e ENC Transfer encoding. Ignored. base64 is assumed" */ \
2269 "\nOther options are silently ignored" \
2271 #define man_trivial_usage \
2272 "[-aw] [MANPAGE]..."
2273 #define man_full_usage "\n\n" \
2274 "Format and display manual page\n" \
2276 "\n -a Display all pages" \
2277 "\n -w Show page locations" \
2279 #define matchpathcon_trivial_usage \
2280 "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
2281 #define matchpathcon_full_usage "\n\n" \
2282 " -n Don't display path" \
2283 "\n -N Don't use translations" \
2284 "\n -f Use alternate file_context file" \
2285 "\n -p Use prefix to speed translations" \
2286 "\n -V Verify file context on disk matches defaults" \
2288 #define md5sum_trivial_usage \
2290 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum -c [-sw] [FILE]")
2291 #define md5sum_full_usage "\n\n" \
2292 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
2293 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2295 "\n -c Check sums against given list" \
2296 "\n -s Don't output anything, status code shows success" \
2297 "\n -w Warn about improperly formatted checksum lines" \
2300 #define md5sum_example_usage \
2301 "$ md5sum < busybox\n" \
2302 "6fd11e98b98a58f64ff3398d7b324003\n" \
2303 "$ md5sum busybox\n" \
2304 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
2306 "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
2310 #define sha1sum_trivial_usage \
2312 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum -c [-sw] [FILE]")
2313 #define sha1sum_full_usage "\n\n" \
2314 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums" \
2315 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2317 "\n -c Check sums against given list" \
2318 "\n -s Don't output anything, status code shows success" \
2319 "\n -w Warn about improperly formatted checksum lines" \
2322 #define sha256sum_trivial_usage \
2324 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha256sum -c [-sw] [FILE]")
2325 #define sha256sum_full_usage "\n\n" \
2326 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA256 checksums" \
2327 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2329 "\n -c Check sums against given list" \
2330 "\n -s Don't output anything, status code shows success" \
2331 "\n -w Warn about improperly formatted checksum lines" \
2334 #define sha512sum_trivial_usage \
2336 IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha512sum -c [-sw] [FILE]")
2337 #define sha512sum_full_usage "\n\n" \
2338 "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA512 checksums" \
2339 IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
2341 "\n -c Check sums against given list" \
2342 "\n -s Don't output anything, status code shows success" \
2343 "\n -w Warn about improperly formatted checksum lines" \
2346 #define mdev_trivial_usage \
2348 #define mdev_full_usage "\n\n" \
2349 " -s Scan /sys and populate /dev during system boot\n" \
2351 "It can be run by kernel as a hotplug helper. To activate it:\n" \
2352 " echo /sbin/mdev > /proc/sys/kernel/hotplug\n" \
2353 IF_FEATURE_MDEV_CONF( \
2354 "It uses /etc/mdev.conf with lines\n" \
2355 "[-]DEVNAME UID:GID PERM" \
2356 IF_FEATURE_MDEV_RENAME(" [>|=PATH]") \
2357 IF_FEATURE_MDEV_EXEC(" [@|$|*PROG]") \
2360 #define mdev_notes_usage "" \
2361 IF_FEATURE_MDEV_CONFIG( \
2362 "The mdev config file contains lines that look like:\n" \
2363 " hd[a-z][0-9]* 0:3 660\n\n" \
2364 "That's device name (with regex match), uid:gid, and permissions.\n\n" \
2365 IF_FEATURE_MDEV_EXEC( \
2366 "Optionally, that can be followed (on the same line) by a special character\n" \
2367 "and a command line to run after creating/before deleting the corresponding\n" \
2368 "device(s). The environment variable $MDEV indicates the active device node\n" \
2369 "(which is useful if it's a regex match). For example:\n\n" \
2370 " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
2371 "The special characters are @ (run after creating), $ (run before deleting),\n" \
2372 "and * (run both after creating and before deleting). The commands run in\n" \
2373 "the /dev directory, and use system() which calls /bin/sh.\n\n" \
2375 "Config file parsing stops on the first matching line. If no config\n" \
2376 "entry is matched, devices are created with default 0:0 660. (Make\n" \
2377 "the last line match .* to override this.)\n\n" \
2380 #define microcom_trivial_usage \
2381 "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
2382 #define microcom_full_usage "\n\n" \
2383 "Copy bytes for stdin to TTY and from TTY to stdout\n" \
2385 "\n -d Wait up to DELAY ms for TTY output before sending every" \
2386 "\n next byte to it" \
2387 "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \
2388 "\n -s Set serial line to SPEED" \
2389 "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \
2391 #define mkdir_trivial_usage \
2392 "[OPTIONS] DIRECTORY..."
2393 #define mkdir_full_usage "\n\n" \
2394 "Create DIRECTORY\n" \
2397 "\n -p No error if exists; make parent directories as needed" \
2399 "\n -Z Set security context" \
2402 #define mkdir_example_usage \
2403 "$ mkdir /tmp/foo\n" \
2404 "$ mkdir /tmp/foo\n" \
2405 "/tmp/foo: File exists\n" \
2406 "$ mkdir /tmp/foo/bar/baz\n" \
2407 "/tmp/foo/bar/baz: No such file or directory\n" \
2408 "$ mkdir -p /tmp/foo/bar/baz\n"
2410 #define mkfifo_trivial_usage \
2411 "[-m MODE] " IF_SELINUX("[-Z] ") "NAME"
2412 #define mkfifo_full_usage "\n\n" \
2413 "Create named pipe\n" \
2415 "\n -m MODE Mode (default a=rw)" \
2417 "\n -Z Set security context" \
2420 #define mkfs_ext2_trivial_usage \
2422 /* "[-c|-l filename] " */ \
2424 /* "[-f fragment-size] [-g blocks-per-group] " */ \
2425 "[-i INODE_RATIO] [-I INODE_SIZE] " \
2426 /* "[-j] [-J journal-options] [-N number-of-inodes] " */ \
2427 "[-m RESERVED_PERCENT] " \
2428 /* "[-o creator-os] [-O feature[,...]] [-q] " */ \
2429 /* "[r fs-revision-level] [-E extended-options] [-v] [-F] " */ \
2431 /* "[-M last-mounted-directory] [-S] [-T filesystem-type] " */ \
2433 #define mkfs_ext2_full_usage "\n\n" \
2434 " -b BLK_SIZE Block size, bytes" \
2435 /* "\n -c Check device for bad blocks" */ \
2436 /* "\n -E opts Set extended options" */ \
2437 /* "\n -f size Fragment size in bytes" */ \
2439 /* "\n -g N Number of blocks in a block group" */ \
2440 "\n -i RATIO Max number of files is filesystem_size / RATIO" \
2441 "\n -I BYTES Inode size (min 128)" \
2442 /* "\n -j Create a journal (ext3)" */ \
2443 /* "\n -J opts Set journal options (size/device)" */ \
2444 /* "\n -l file Read bad blocks list from file" */ \
2445 "\n -L LBL Volume label" \
2446 "\n -m PERCENT Percent of blocks to reserve for admin" \
2447 /* "\n -M dir Set last mounted directory" */ \
2449 /* "\n -N N Number of inodes to create" */ \
2450 /* "\n -o os Set the 'creator os' field" */ \
2451 /* "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" */ \
2452 /* "\n -q Quiet" */ \
2453 /* "\n -r rev Set filesystem revision" */ \
2454 /* "\n -S Write superblock and group descriptors only" */ \
2455 /* "\n -T fs-type Set usage type (news/largefile/largefile4)" */ \
2456 /* "\n -v Verbose" */ \
2458 #define mkfs_minix_trivial_usage \
2459 "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]"
2460 #define mkfs_minix_full_usage "\n\n" \
2461 "Make a MINIX filesystem\n" \
2463 "\n -c Check device for bad blocks" \
2464 "\n -n [14|30] Maximum length of filenames" \
2465 "\n -i INODES Number of inodes for the filesystem" \
2466 "\n -l FILE Read bad blocks list from FILE" \
2467 "\n -v Make version 2 filesystem" \
2469 #define mkfs_reiser_trivial_usage \
2470 "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]"
2472 #define mkfs_reiser_full_usage "\n\n" \
2473 "Make a ReiserFS V3 filesystem\n" \
2476 "\n -l LBL Volume label" \
2478 #define mkfs_vfat_trivial_usage \
2479 "[-v] [-n LABEL] BLOCKDEV [KBYTES]"
2480 /* Accepted but ignored:
2481 "[-c] [-C] [-I] [-l bad-block-file] [-b backup-boot-sector] "
2482 "[-m boot-msg-file] [-i volume-id] "
2483 "[-s sectors-per-cluster] [-S logical-sector-size] [-f number-of-FATs] "
2484 "[-h hidden-sectors] [-F fat-size] [-r root-dir-entries] [-R reserved-sectors] "
2486 #define mkfs_vfat_full_usage "\n\n" \
2487 "Make a FAT32 filesystem\n" \
2489 /* "\n -c Check device for bad blocks" */ \
2491 /* "\n -I Allow to use entire disk device (e.g. /dev/hda)" */ \
2492 "\n -n LBL Volume label" \
2494 #define mknod_trivial_usage \
2495 "[-m MODE] " IF_SELINUX("[-Z] ") "NAME TYPE MAJOR MINOR"
2496 #define mknod_full_usage "\n\n" \
2497 "Create a special file (block, character, or pipe)\n" \
2499 "\n -m MODE Creation mode (default a=rw)" \
2501 "\n -Z Set security context" \
2504 "\n b Block device" \
2505 "\n c or u Character device" \
2506 "\n p Named pipe (MAJOR and MINOR are ignored)" \
2508 #define mknod_example_usage \
2509 "$ mknod /dev/fd0 b 2 0\n" \
2510 "$ mknod -m 644 /tmp/pipe p\n"
2512 #define mkswap_trivial_usage \
2513 "[-L LBL] BLOCKDEV [KBYTES]"
2514 #define mkswap_full_usage "\n\n" \
2515 "Prepare BLOCKDEV to be used as swap partition\n" \
2519 #define mktemp_trivial_usage \
2520 "[-dt] [-p DIR] [TEMPLATE]"
2521 #define mktemp_full_usage "\n\n" \
2522 "Create a temporary file with name based on TEMPLATE and print its name.\n" \
2523 "TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \
2525 "\n -d Make a directory instead of a file" \
2526 /* "\n -q Fail silently if an error occurs" - we ignore it */ \
2527 "\n -t Generate a path rooted in temporary directory" \
2528 "\n -p DIR Use DIR as a temporary directory (implies -t)" \
2530 "\nFor -t or -p, directory is chosen as follows:" \
2531 "\n$TMPDIR if set, else -p DIR, else /tmp" \
2533 #define mktemp_example_usage \
2534 "$ mktemp /tmp/temp.XXXXXX\n" \
2535 "/tmp/temp.mWiLjM\n" \
2536 "$ ls -la /tmp/temp.mWiLjM\n" \
2537 "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
2539 #define more_trivial_usage \
2541 #define more_full_usage "\n\n" \
2542 "View FILE (or stdin) one screenful at a time"
2544 #define more_example_usage \
2547 #define mount_trivial_usage \
2548 "[OPTIONS] [-o OPTS] DEVICE NODE"
2549 #define mount_full_usage "\n\n" \
2550 "Mount a filesystem. Filesystem autodetection requires /proc.\n" \
2552 "\n -a Mount all filesystems in fstab" \
2553 IF_FEATURE_MOUNT_FAKE( \
2554 IF_FEATURE_MTAB_SUPPORT( \
2555 "\n -f Update /etc/mtab, but don't mount" \
2557 IF_NOT_FEATURE_MTAB_SUPPORT( \
2561 IF_FEATURE_MOUNT_HELPERS( \
2562 "\n -i Don't run mount helper" \
2564 IF_FEATURE_MTAB_SUPPORT( \
2565 "\n -n Don't update /etc/mtab" \
2567 "\n -r Read-only mount" \
2568 "\n -w Read-write mount (default)" \
2569 "\n -t FSTYPE Filesystem type" \
2570 "\n -O OPT Mount only filesystems with option OPT (-a only)" \
2572 IF_FEATURE_MOUNT_LOOP( \
2573 "\n loop Ignored (loop devices are autodetected)" \
2575 IF_FEATURE_MOUNT_FLAGS( \
2576 "\n [a]sync Writes are [a]synchronous" \
2577 "\n [no]atime Disable/enable updates to inode access times" \
2578 "\n [no]diratime Disable/enable atime updates to directories" \
2579 "\n [no]relatime Disable/enable atime updates relative to modification time" \
2580 "\n [no]dev (Dis)allow use of special device files" \
2581 "\n [no]exec (Dis)allow use of executable files" \
2582 "\n [no]suid (Dis)allow set-user-id-root programs" \
2583 "\n [r]shared Convert [recursively] to a shared subtree" \
2584 "\n [r]slave Convert [recursively] to a slave subtree" \
2585 "\n [r]private Convert [recursively] to a private subtree" \
2586 "\n [un]bindable Make mount point [un]able to be bind mounted" \
2587 "\n bind Bind a file or directory to another location" \
2588 "\n move Relocate an existing mount point" \
2590 "\n remount Remount a mounted filesystem, changing flags" \
2591 "\n ro/rw Same as -r/-w" \
2593 "\nThere are filesystem-specific -o flags." \
2595 #define mount_example_usage \
2597 "/dev/hda3 on / type minix (rw)\n" \
2598 "proc on /proc type proc (rw)\n" \
2599 "devpts on /dev/pts type devpts (rw)\n" \
2600 "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
2601 "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
2602 "$ mount cd_image.iso mydir\n"
2603 #define mount_notes_usage \
2604 "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
2606 #define mountpoint_trivial_usage \
2607 "[-q] <[-dn] DIR | -x DEVICE>"
2608 #define mountpoint_full_usage "\n\n" \
2609 "Check if the directory is a mountpoint\n" \
2612 "\n -d Print major/minor device number of the filesystem" \
2613 "\n -n Print device name of the filesystem" \
2614 "\n -x Print major/minor device number of the blockdevice" \
2616 #define mountpoint_example_usage \
2617 "$ mountpoint /proc\n" \
2618 "/proc is not a mountpoint\n" \
2619 "$ mountpoint /sys\n" \
2620 "/sys is a mountpoint\n"
2622 #define mt_trivial_usage \
2623 "[-f device] opcode value"
2624 #define mt_full_usage "\n\n" \
2625 "Control magnetic tape drive operation\n" \
2627 "Available Opcodes:\n" \
2629 "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
2630 "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
2631 "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
2632 "setpart tell unload unlock weof wset" \
2634 #define nameif_trivial_usage \
2635 "[-s] [-c FILE] [{IFNAME MACADDR}]"
2636 #define nameif_full_usage "\n\n" \
2637 "Rename network interface while it in the down state\n" \
2639 "\n -c FILE Use configuration file (default: /etc/mactab)" \
2640 "\n -s Use syslog (LOCAL0 facility)" \
2641 "\n IFNAME MACADDR new_interface_name interface_mac_address" \
2643 #define nameif_example_usage \
2644 "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
2646 "$ nameif -c /etc/my_mactab_file\n" \
2648 #define nohup_trivial_usage \
2650 #define nohup_full_usage "\n\n" \
2651 "Run PROG immune to hangups, with output to a non-tty"
2652 #define nohup_example_usage \
2655 #define nslookup_trivial_usage \
2657 #define nslookup_full_usage "\n\n" \
2658 "Query the nameserver for the IP address of the given HOST\n" \
2659 "optionally using a specified DNS server"
2660 #define nslookup_example_usage \
2661 "$ nslookup localhost\n" \
2662 "Server: default\n" \
2663 "Address: default\n" \
2666 "Address: 127.0.0.1\n"
2668 #define ntpd_trivial_usage \
2669 "[-dnqNw"IF_FEATURE_NTPD_SERVER("l")"] [-S PROG] [-p PEER]..."
2670 #define ntpd_full_usage "\n\n" \
2671 "NTP client/server\n" \
2674 "\n -n Do not daemonize" \
2675 "\n -q Quit after clock is set" \
2676 "\n -N Run at high priority" \
2677 "\n -w Do not set time (only query peers), implies -n" \
2678 IF_FEATURE_NTPD_SERVER( \
2679 "\n -l Run as server on port 123" \
2681 "\n -S PROG Run PROG after stepping time, stratum change, and every 11 mins" \
2682 "\n -p PEER Obtain time from PEER (may be repeated)" \
2684 #define od_trivial_usage \
2685 "[-aBbcDdeFfHhIiLlOovXx] " IF_DESKTOP("[-t TYPE] ") "[FILE]"
2686 #define od_full_usage "\n\n" \
2687 "Write an unambiguous representation, octal bytes by default, of FILE\n" \
2688 "(or stdin) to stdout"
2690 #define openvt_trivial_usage \
2691 "[-c N] [-sw] [PROG ARGS]"
2692 #define openvt_full_usage "\n\n" \
2693 "Start PROG on a new virtual terminal\n" \
2695 "\n -c N Use specified VT" \
2696 "\n -s Switch to the VT" \
2697 /* "\n -l Run PROG as login shell (by prepending '-')" */ \
2698 "\n -w Wait for PROG to exit" \
2700 #define openvt_example_usage \
2701 "openvt 2 /bin/ash\n"
2704 #define parse_trivial_usage \
2705 "[-n MAXTOKENS] [-m MINTOKENS] [-d DELIMS] [-f FLAGS] FILE..."
2706 #define parse_full_usage ""
2709 #define passwd_trivial_usage \
2711 #define passwd_full_usage "\n\n" \
2712 "Change USER's password. If no USER is specified,\n" \
2713 "changes the password for the current user.\n" \
2715 "\n -a ALG Algorithm to use for password (des, md5)" /* ", sha1)" */ \
2716 "\n -d Delete password for the account" \
2717 "\n -l Lock (disable) account" \
2718 "\n -u Unlock (re-enable) account" \
2720 #define chpasswd_trivial_usage \
2721 IF_LONG_OPTS("[--md5|--encrypted]") IF_NOT_LONG_OPTS("[-m|-e]")
2722 #define chpasswd_full_usage "\n\n" \
2723 "Read user:password from stdin and update /etc/passwd\n" \
2726 "\n -e,--encrypted Supplied passwords are in encrypted form" \
2727 "\n -m,--md5 Use MD5 encryption instead of DES" \
2730 "\n -e Supplied passwords are in encrypted form" \
2731 "\n -m Use MD5 encryption instead of DES" \
2734 #define pgrep_trivial_usage \
2735 "[-flnovx] [-s SID|-P PPID|PATTERN]"
2736 #define pgrep_full_usage "\n\n" \
2737 "Display process(es) selected by regex PATTERN\n" \
2739 "\n -l Show command name too" \
2740 "\n -f Match against entire command line" \
2741 "\n -n Show the newest process only" \
2742 "\n -o Show the oldest process only" \
2743 "\n -v Negate the match" \
2744 "\n -x Match whole name (not substring)" \
2745 "\n -s Match session ID (0 for current)" \
2746 "\n -P Match parent process ID" \
2748 #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
2749 #define pidof_trivial_usage \
2750 "[OPTIONS] [NAME]..."
2751 #define USAGE_PIDOF "\n\nOptions:"
2753 #define pidof_trivial_usage \
2755 #define USAGE_PIDOF /* none */
2757 #define pidof_full_usage "\n\n" \
2758 "List PIDs of all processes with names that match NAMEs" \
2760 IF_FEATURE_PIDOF_SINGLE( \
2761 "\n -s Show only one PID" \
2763 IF_FEATURE_PIDOF_OMIT( \
2764 "\n -o PID Omit given pid" \
2765 "\n Use %PPID to omit pid of pidof's parent" \
2768 #define pidof_example_usage \
2771 IF_FEATURE_PIDOF_OMIT( \
2772 "$ pidof /bin/sh\n20351 5973 5950\n") \
2773 IF_FEATURE_PIDOF_OMIT( \
2774 "$ pidof /bin/sh -o %PPID\n20351 5950")
2776 #define pipe_progress_trivial_usage NOUSAGE_STR
2777 #define pipe_progress_full_usage ""
2779 #define pivot_root_trivial_usage \
2781 #define pivot_root_full_usage "\n\n" \
2782 "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
2783 "the new root file system"
2785 #define pkill_trivial_usage \
2786 "[-l|-SIGNAL] [-fnovx] [-s SID|-P PPID|PATTERN]"
2787 #define pkill_full_usage "\n\n" \
2788 "Send a signal to process(es) selected by regex PATTERN\n" \
2790 "\n -l List all signals" \
2791 "\n -f Match against entire command line" \
2792 "\n -n Signal the newest process only" \
2793 "\n -o Signal the oldest process only" \
2794 "\n -v Negate the match" \
2795 "\n -x Match whole name (not substring)" \
2796 "\n -s Match session ID (0 for current)" \
2797 "\n -P Match parent process ID" \
2799 #define popmaildir_trivial_usage \
2800 "[OPTIONS] MAILDIR [CONN_HELPER ARGS]"
2801 #define popmaildir_full_usage "\n\n" \
2802 "Fetch content of remote mailbox to local maildir\n" \
2804 /* "\n -b Binary mode. Ignored" */ \
2805 /* "\n -d Debug. Ignored" */ \
2806 /* "\n -m Show used memory. Ignored" */ \
2807 /* "\n -V Show version. Ignored" */ \
2808 /* "\n -c Use tcpclient. Ignored" */ \
2809 /* "\n -a Use APOP protocol. Implied. If server supports APOP -> use it" */ \
2810 "\n -s Skip authorization" \
2811 "\n -T Get messages with TOP instead of RETR" \
2812 "\n -k Keep retrieved messages on the server" \
2813 "\n -t SEC Network timeout" \
2814 IF_FEATURE_POPMAILDIR_DELIVERY( \
2815 "\n -F \"PROG ARGS\" Filter program (may be repeated)" \
2816 "\n -M \"PROG ARGS\" Delivery program" \
2819 "\nFetch from plain POP3 server:" \
2820 "\npopmaildir -k DIR nc pop3.server.com 110 <user_and_pass.txt" \
2821 "\nFetch from SSLed POP3 server and delete fetched emails:" \
2822 "\npopmaildir DIR -- openssl s_client -quiet -connect pop3.server.com:995 <user_and_pass.txt"
2823 /* "\n -R BYTES Remove old messages on the server >= BYTES. Ignored" */
2824 /* "\n -Z N1-N2 Remove messages from N1 to N2 (dangerous). Ignored" */
2825 /* "\n -L BYTES Don't retrieve new messages >= BYTES. Ignored" */
2826 /* "\n -H LINES Type first LINES of a message. Ignored" */
2827 #define popmaildir_example_usage \
2828 "$ popmaildir -k ~/Maildir -- nc pop.drvv.ru 110 [<password_file]\n" \
2829 "$ popmaildir ~/Maildir -- openssl s_client -quiet -connect pop.gmail.com:995 [<password_file]\n"
2831 #define printenv_trivial_usage \
2833 #define printenv_full_usage "\n\n" \
2834 "Print environment VARIABLEs.\n" \
2835 "If no VARIABLE specified, print all."
2837 #define printf_trivial_usage \
2838 "FORMAT [ARGUMENT]..."
2839 #define printf_full_usage "\n\n" \
2840 "Format and print ARGUMENT(s) according to FORMAT,\n" \
2841 "where FORMAT controls the output exactly as in C printf"
2842 #define printf_example_usage \
2843 "$ printf \"Val=%d\\n\" 5\n" \
2849 #define ps_trivial_usage \
2850 "[-o COL1,COL2=HEADER]" IF_FEATURE_SHOW_THREADS(" [-T]")
2851 #define ps_full_usage "\n\n" \
2852 "Show list of processes\n" \
2854 "\n -o COL1,COL2=HEADER Select columns for display" \
2855 IF_FEATURE_SHOW_THREADS( \
2856 "\n -T Show threads" \
2859 #else /* !ENABLE_DESKTOP */
2861 #if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE
2862 #define USAGE_PS "\nThis version of ps accepts no options"
2864 #define USAGE_PS "\nOptions:"
2867 #define ps_trivial_usage \
2869 #define ps_full_usage "\n\n" \
2870 "Show list of processes\n" \
2873 "\n -Z Show selinux context" \
2875 IF_FEATURE_PS_WIDE( \
2876 "\n w Wide output" \
2879 #endif /* ENABLE_DESKTOP */
2881 #define ps_example_usage \
2883 " PID Uid Gid State Command\n" \
2884 " 1 root root S init\n" \
2885 " 2 root root S [kflushd]\n" \
2886 " 3 root root S [kupdate]\n" \
2887 " 4 root root S [kpiod]\n" \
2888 " 5 root root S [kswapd]\n" \
2889 " 742 andersen andersen S [bash]\n" \
2890 " 743 andersen andersen S -bash\n" \
2891 " 745 root root S [getty]\n" \
2892 " 2990 andersen andersen R ps\n" \
2894 #define pscan_trivial_usage \
2895 "[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST"
2896 #define pscan_full_usage "\n\n" \
2897 "Scan a host, print all open ports\n" \
2899 "\n -c Show closed ports too" \
2900 "\n -b Show blocked ports too" \
2901 "\n -p Scan from this port (default 1)" \
2902 "\n -P Scan up to this port (default 1024)" \
2903 "\n -t Timeout (default 5000 ms)" \
2904 "\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \
2906 #define pwd_trivial_usage \
2908 #define pwd_full_usage "\n\n" \
2909 "Print the full filename of the current working directory"
2910 #define pwd_example_usage \
2914 #define raidautorun_trivial_usage \
2916 #define raidautorun_full_usage "\n\n" \
2917 "Tell the kernel to automatically search and start RAID arrays"
2918 #define raidautorun_example_usage \
2919 "$ raidautorun /dev/md0"
2921 #define rdate_trivial_usage \
2923 #define rdate_full_usage "\n\n" \
2924 "Get and possibly set the system date and time from a remote HOST\n" \
2926 "\n -s Set the system date and time (default)" \
2927 "\n -p Print the date and time" \
2929 #define rdev_trivial_usage \
2931 #define rdev_full_usage "\n\n" \
2932 "Print the device node associated with the filesystem mounted at '/'"
2933 #define rdev_example_usage \
2935 "/dev/mtdblock9 /\n"
2937 #define readahead_trivial_usage \
2939 #define readahead_full_usage "\n\n" \
2940 "Preload FILEs to RAM"
2942 #define readlink_trivial_usage \
2943 IF_FEATURE_READLINK_FOLLOW("[-fnv] ") "FILE"
2944 #define readlink_full_usage "\n\n" \
2945 "Display the value of a symlink" \
2946 IF_FEATURE_READLINK_FOLLOW( "\n" \
2948 "\n -f Canonicalize by following all symlinks" \
2949 "\n -n Don't add newline" \
2953 #define readprofile_trivial_usage \
2955 #define readprofile_full_usage "\n\n" \
2957 "\n -m mapfile (Default: /boot/System.map)" \
2958 "\n -p profile (Default: /proc/profile)" \
2959 "\n -M NUM Set the profiling multiplier to NUM" \
2960 "\n -i Print only info about the sampling step" \
2962 "\n -a Print all symbols, even if count is 0" \
2963 "\n -b Print individual histogram-bin counts" \
2964 "\n -s Print individual counters within functions" \
2965 "\n -r Reset all the counters (root only)" \
2966 "\n -n Disable byte order auto-detection" \
2968 #define realpath_trivial_usage \
2970 #define realpath_full_usage "\n\n" \
2971 "Return the absolute pathnames of given FILE"
2973 #define reformime_trivial_usage \
2974 "[OPTIONS] [FILE]..."
2975 #define reformime_full_usage "\n\n" \
2976 "Parse MIME-encoded message\n" \
2978 "\n -x PREFIX Extract content of MIME sections to files" \
2979 "\n -X PROG ARGS Filter content of MIME sections through PROG" \
2980 "\n Must be the last option" \
2982 "\nOther options are silently ignored" \
2984 #define scriptreplay_trivial_usage \
2985 "timingfile [typescript [divisor]]"
2986 #define scriptreplay_full_usage "\n\n" \
2987 "Play back typescripts, using timing information"
2989 #define reset_trivial_usage \
2991 #define reset_full_usage "\n\n" \
2994 #define resize_trivial_usage \
2996 #define resize_full_usage "\n\n" \
2999 #define restorecon_trivial_usage \
3000 "[-iFnRv] [-e EXCLUDEDIR]... [-o FILE] [-f FILE]"
3001 #define restorecon_full_usage "\n\n" \
3002 "Reset security contexts of files in pathname\n" \
3003 "\n -i Ignore files that don't exist" \
3004 "\n -f FILE File with list of files to process" \
3005 "\n -e DIR Directory to exclude" \
3006 "\n -R,-r Recurse" \
3007 "\n -n Don't change any file labels" \
3008 "\n -o FILE Save list of files with incorrect context" \
3010 "\n -vv Show changed labels" \
3011 "\n -F Force reset of context to match file_context" \
3012 "\n for customizable files, or the user section," \
3013 "\n if it has changed" \
3015 #define rfkill_trivial_usage \
3016 "COMMAND [INDEX|TYPE]"
3017 #define rfkill_full_usage "\n\n" \
3018 "Enable/disable wireless devices\n" \
3020 "\n list [INDEX|TYPE] List current state" \
3021 "\n block INDEX|TYPE Disable device" \
3022 "\n unblock INDEX|TYPE Enable device" \
3024 "\n TYPE: all, wlan(wifi), bluetooth, uwb(ultrawideband)," \
3025 "\n wimax, wwan, gps, fm" \
3027 #define rm_trivial_usage \
3029 #define rm_full_usage "\n\n" \
3030 "Remove (unlink) FILEs\n" \
3032 "\n -i Always prompt before removing" \
3033 "\n -f Never prompt" \
3034 "\n -R,-r Recurse" \
3036 #define rm_example_usage \
3037 "$ rm -rf /tmp/foo\n"
3039 #define rmdir_trivial_usage \
3040 "[OPTIONS] DIRECTORY..."
3041 #define rmdir_full_usage "\n\n" \
3042 "Remove DIRECTORY if it is empty\n" \
3044 IF_FEATURE_RMDIR_LONG_OPTIONS( \
3045 "\n -p|--parents Include parents" \
3046 "\n --ignore-fail-on-non-empty" \
3048 IF_NOT_FEATURE_RMDIR_LONG_OPTIONS( \
3049 "\n -p Include parents" \
3052 #define rmdir_example_usage \
3053 "# rmdir /tmp/foo\n"
3055 #define route_trivial_usage \
3056 "[{add|del|delete}]"
3057 #define route_full_usage "\n\n" \
3058 "Edit kernel routing tables\n" \
3060 "\n -n Don't resolve names" \
3061 "\n -e Display other/more information" \
3062 "\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \
3064 #define rpm_trivial_usage \
3065 "-i PACKAGE.rpm; rpm -qp[ildc] PACKAGE.rpm"
3066 #define rpm_full_usage "\n\n" \
3067 "Manipulate RPM packages\n" \
3069 "\n -i Install package" \
3070 "\n -qp Query package" \
3072 "\n -i Show information" \
3073 "\n -l List contents" \
3074 "\n -d List documents" \
3075 "\n -c List config files" \
3077 #define rpm2cpio_trivial_usage \
3079 #define rpm2cpio_full_usage "\n\n" \
3080 "Output a cpio archive of the rpm file"
3082 #define rtcwake_trivial_usage \
3083 "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]"
3084 #define rtcwake_full_usage "\n\n" \
3085 "Enter a system sleep state until specified wakeup time\n" \
3087 "\n -a,--auto Read clock mode from adjtime" \
3088 "\n -l,--local Clock is set to local time" \
3089 "\n -u,--utc Clock is set to UTC time" \
3090 "\n -d,--device=DEV Specify the RTC device" \
3091 "\n -m,--mode=MODE Set the sleep state (default: standby)" \
3092 "\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \
3093 "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \
3096 "\n -a Read clock mode from adjtime" \
3097 "\n -l Clock is set to local time" \
3098 "\n -u Clock is set to UTC time" \
3099 "\n -d DEV Specify the RTC device" \
3100 "\n -m MODE Set the sleep state (default: standby)" \
3101 "\n -s SEC Set the timeout in SEC seconds from now" \
3102 "\n -t TIME Set the timeout to TIME seconds from epoch" \
3105 #define runcon_trivial_usage \
3106 "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \
3107 "runcon CONTEXT PROG ARGS"
3108 #define runcon_full_usage "\n\n" \
3109 "Run PROG in a different security context\n" \
3110 "\n CONTEXT Complete security context\n" \
3111 IF_FEATURE_RUNCON_LONG_OPTIONS( \
3112 "\n -c,--compute Compute process transition context before modifying" \
3113 "\n -t,--type=TYPE Type (for same role as parent)" \
3114 "\n -u,--user=USER User identity" \
3115 "\n -r,--role=ROLE Role" \
3116 "\n -l,--range=RNG Levelrange" \
3118 IF_NOT_FEATURE_RUNCON_LONG_OPTIONS( \
3119 "\n -c Compute process transition context before modifying" \
3120 "\n -t TYPE Type (for same role as parent)" \
3121 "\n -u USER User identity" \
3123 "\n -l RNG Levelrange" \
3126 #define run_parts_trivial_usage \
3127 "[-t] "IF_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
3128 #define run_parts_full_usage "\n\n" \
3129 "Run a bunch of scripts in DIRECTORY\n" \
3131 "\n -t Print what would be run, but don't actually run anything" \
3132 "\n -a ARG Pass ARG as argument for every program" \
3133 "\n -u MASK Set the umask to MASK before running every program" \
3134 IF_FEATURE_RUN_PARTS_FANCY( \
3135 "\n -l Print names of all matching files even if they are not executable" \
3138 #define run_parts_example_usage \
3139 "$ run-parts -a start /etc/init.d\n" \
3140 "$ run-parts -a stop=now /etc/init.d\n\n" \
3141 "Let's assume you have a script foo/dosomething:\n" \
3143 "for i in $*; do eval $i; done; unset i\n" \
3144 "case \"$1\" in\n" \
3145 "start*) echo starting something;;\n" \
3146 "stop*) set -x; shutdown -h $stop;;\n" \
3148 "Running this yields:\n" \
3149 "$run-parts -a stop=+4m foo/\n" \
3152 #define runlevel_trivial_usage \
3154 #define runlevel_full_usage "\n\n" \
3155 "Find the current and previous system runlevel\n" \
3157 "If no utmp FILE exists or if no runlevel record can be found,\n" \
3159 #define runlevel_example_usage \
3160 "$ runlevel /var/run/utmp\n" \
3163 #define runsv_trivial_usage \
3165 #define runsv_full_usage "\n\n" \
3166 "Start and monitor a service and optionally an appendant log service"
3168 #define runsvdir_trivial_usage \
3169 "[-P] [-s SCRIPT] DIR"
3170 #define runsvdir_full_usage "\n\n" \
3171 "Start a runsv process for each subdirectory. If it exits, restart it.\n" \
3172 "\n -P Put each runsv in a new session" \
3173 "\n -s SCRIPT Run SCRIPT <signo> after signal is processed" \
3175 #define rx_trivial_usage \
3177 #define rx_full_usage "\n\n" \
3178 "Receive a file using the xmodem protocol"
3179 #define rx_example_usage \
3182 #define script_trivial_usage \
3183 "[-afq" IF_SCRIPTREPLAY("t") "] [-c PROG] [OUTFILE]"
3184 #define script_full_usage "\n\n" \
3186 "\n -a Append output" \
3187 "\n -c PROG Run PROG, not shell" \
3188 "\n -f Flush output after each write" \
3191 "\n -t Send timing to stderr" \
3194 #define sed_trivial_usage \
3195 "[-efinr] SED_CMD [FILE]..."
3196 #define sed_full_usage "\n\n" \
3198 "\n -e CMD Add CMD to sed commands to be executed" \
3199 "\n -f FILE Add FILE contents to sed commands to be executed" \
3200 "\n -i Edit files in-place (else sends result to stdout)" \
3201 "\n -n Suppress automatic printing of pattern space" \
3202 "\n -r Use extended regex syntax" \
3204 "\nIf no -e or -f, the first non-option argument is the sed command string." \
3205 "\nRemaining arguments are input files (stdin if none)."
3207 #define sed_example_usage \
3208 "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
3211 #define selinuxenabled_trivial_usage NOUSAGE_STR
3212 #define selinuxenabled_full_usage ""
3214 #define sendmail_trivial_usage \
3215 "[OPTIONS] [RECIPIENT_EMAIL]..."
3216 #define sendmail_full_usage "\n\n" \
3217 "Read email from stdin and send it\n" \
3218 "\nStandard options:" \
3219 "\n -t Read additional recipients from message body" \
3220 "\n -f sender Sender (required)" \
3221 "\n -o options Various options. -oi implied, others are ignored" \
3222 "\n -i -oi synonym. implied and ignored" \
3224 "\nBusybox specific options:" \
3225 "\n -w seconds Network timeout" \
3226 "\n -H 'PROG ARGS' Run connection helper" \
3228 "\n -H 'exec openssl s_client -quiet -tls1 -starttls smtp" \
3229 "\n -connect smtp.gmail.com:25' <email.txt" \
3230 "\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
3231 "\n -H 'exec openssl s_client -quiet -tls1" \
3232 "\n -connect smtp.gmail.com:465' <email.txt" \
3233 "\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
3234 "\n -S server[:port] Server" \
3235 "\n -au<username> Username for AUTH LOGIN" \
3236 "\n -ap<password> Password for AUTH LOGIN" \
3237 "\n -am<method> Authentication method. Ignored. LOGIN is implied" \
3239 "\nOther options are silently ignored; -oi -t is implied" \
3241 "\nUse makemime applet to create message with attachments" \
3244 #define seq_trivial_usage \
3245 "[-w] [-s SEP] [FIRST [INC]] LAST"
3246 #define seq_full_usage "\n\n" \
3247 "Print numbers from FIRST to LAST, in steps of INC.\n" \
3248 "FIRST, INC default to 1.\n" \
3250 "\n -w Pad to last with leading zeros" \
3251 "\n -s SEP String separator" \
3253 #define sestatus_trivial_usage \
3255 #define sestatus_full_usage "\n\n" \
3257 "\n -b Display current state of booleans" \
3259 #define setconsole_trivial_usage \
3260 "[-r" IF_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]"
3261 #define setconsole_full_usage "\n\n" \
3262 "Redirect system console output to DEVICE (default: /dev/tty)\n" \
3264 "\n -r Reset output to /dev/console" \
3266 #define setenforce_trivial_usage \
3267 "[Enforcing | Permissive | 1 | 0]"
3268 #define setenforce_full_usage ""
3270 #define setfiles_trivial_usage \
3271 "[-dnpqsvW] [-e DIR]... [-o FILE] [-r alt_root_path]" \
3272 IF_FEATURE_SETFILES_CHECK_OPTION( \
3273 " [-c policyfile] spec_file" \
3276 #define setfiles_full_usage "\n\n" \
3277 "Reset file contexts under pathname according to spec_file\n" \
3278 IF_FEATURE_SETFILES_CHECK_OPTION( \
3279 "\n -c FILE Check the validity of the contexts against the specified binary policy" \
3281 "\n -d Show which specification matched each file" \
3282 "\n -l Log changes in file labels to syslog" \
3283 "\n -n Don't change any file labels" \
3284 "\n -q Suppress warnings" \
3285 "\n -r DIR Use an alternate root path" \
3286 "\n -e DIR Exclude DIR" \
3287 "\n -F Force reset of context to match file_context for customizable files" \
3288 "\n -o FILE Save list of files with incorrect context" \
3289 "\n -s Take a list of files from stdin (instead of command line)" \
3290 "\n -v Show changes in file labels, if type or role are changing" \
3291 "\n -vv Show changes in file labels, if type, role, or user are changing" \
3292 "\n -W Display warnings about entries that had no matching files" \
3294 #define setfont_trivial_usage \
3295 "FONT [-m MAPFILE] [-C TTY]"
3296 #define setfont_full_usage "\n\n" \
3297 "Load a console font\n" \
3299 "\n -m MAPFILE Load console screen map" \
3300 "\n -C TTY Affect TTY instead of /dev/tty" \
3302 #define setfont_example_usage \
3303 "$ setfont -m koi8-r /etc/i18n/fontname\n"
3305 #define setkeycodes_trivial_usage \
3306 "SCANCODE KEYCODE..."
3307 #define setkeycodes_full_usage "\n\n" \
3308 "Set entries into the kernel's scancode-to-keycode map,\n" \
3309 "allowing unusual keyboards to generate usable keycodes.\n\n" \
3310 "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
3311 "and KEYCODE is given in decimal." \
3313 #define setkeycodes_example_usage \
3314 "$ setkeycodes e030 127\n"
3316 #define setlogcons_trivial_usage \
3318 #define setlogcons_full_usage "\n\n" \
3319 "Redirect the kernel output to console N (0 for current)"
3321 #define setsebool_trivial_usage \
3324 #define setsebool_full_usage "\n\n" \
3325 "Change boolean setting"
3327 #define setsid_trivial_usage \
3329 #define setsid_full_usage "\n\n" \
3330 "Run PROG in a new session. PROG will have no controlling terminal\n" \
3331 "and will not be affected by keyboard signals (Ctrl-C etc).\n" \
3332 "See setsid(2) for details." \
3334 #define last_trivial_usage \
3335 ""IF_FEATURE_LAST_FANCY("[-HW] [-f FILE]")
3336 #define last_full_usage "\n\n" \
3337 "Show listing of the last users that logged into the system" \
3338 IF_FEATURE_LAST_FANCY( "\n" \
3340 /* "\n -H Show header line" */ \
3341 "\n -W Display with no host column truncation" \
3342 "\n -f FILE Read from FILE instead of /var/log/wtmp" \
3345 #define showkey_trivial_usage \
3347 #define showkey_full_usage "\n\n" \
3348 "Show keys pressed\n" \
3350 "\n -a Display decimal/octal/hex values of the keys" \
3351 "\n -k Display interpreted keycodes (default)" \
3352 "\n -s Display raw scan-codes" \
3354 #define slattach_trivial_usage \
3355 "[-cehmLF] [-s SPEED] [-p PROTOCOL] DEVICE"
3356 #define slattach_full_usage "\n\n" \
3357 "Attach network interface(s) to serial line(s)\n" \
3359 "\n -p PROT Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \
3360 "\n -s SPD Set line speed" \
3361 "\n -e Exit after initializing device" \
3362 "\n -h Exit when the carrier is lost" \
3363 "\n -c PROG Run PROG when the line is hung up" \
3364 "\n -m Do NOT initialize the line in raw 8 bits mode" \
3365 "\n -L Enable 3-wire operation" \
3366 "\n -F Disable RTS/CTS flow control" \
3368 #define sleep_trivial_usage \
3369 IF_FEATURE_FANCY_SLEEP("[") "N" IF_FEATURE_FANCY_SLEEP("]...")
3370 #define sleep_full_usage "\n\n" \
3371 IF_NOT_FEATURE_FANCY_SLEEP("Pause for N seconds") \
3372 IF_FEATURE_FANCY_SLEEP( \
3373 "Pause for a time equal to the total of the args given, where each arg can\n" \
3374 "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays")
3375 #define sleep_example_usage \
3377 "[2 second delay results]\n" \
3378 IF_FEATURE_FANCY_SLEEP( \
3379 "$ sleep 1d 3h 22m 8s\n" \
3380 "[98528 second delay results]\n")
3382 #define sort_trivial_usage \
3384 IF_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \
3386 #define sort_full_usage "\n\n" \
3387 "Sort lines of text\n" \
3389 IF_FEATURE_SORT_BIG( \
3390 "\n -b Ignore leading blanks" \
3391 "\n -c Check whether input is sorted" \
3392 "\n -d Dictionary order (blank or alphanumeric only)" \
3393 "\n -f Ignore case" \
3394 "\n -g General numerical sort" \
3395 "\n -i Ignore unprintable characters" \
3397 "\n -M Sort month" \
3399 "\n -n Sort numbers" \
3400 IF_FEATURE_SORT_BIG( \
3401 "\n -o Output to file" \
3402 "\n -k Sort by key" \
3403 "\n -t CHAR Key separator" \
3405 "\n -r Reverse sort order" \
3406 IF_FEATURE_SORT_BIG( \
3407 "\n -s Stable (don't sort ties alphabetically)" \
3409 "\n -u Suppress duplicate lines" \
3410 IF_FEATURE_SORT_BIG( \
3411 "\n -z Lines are terminated by NUL, not newline" \
3412 "\n -mST Ignored for GNU compatibility") \
3414 #define sort_example_usage \
3415 "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
3422 IF_FEATURE_SORT_BIG( \
3423 "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \
3430 #define split_trivial_usage \
3431 "[OPTIONS] [INPUT [PREFIX]]"
3432 #define split_full_usage "\n\n" \
3434 "\n -b N[k|m] Split by N (kilo|mega)bytes" \
3435 "\n -l N Split by N lines" \
3436 "\n -a N Use N letters as suffix" \
3438 #define split_example_usage \
3439 "$ split TODO foo\n" \
3440 "$ cat TODO | split -a 2 -l 2 TODO_\n"
3442 #define start_stop_daemon_trivial_usage \
3443 "[OPTIONS] [-S|-K] ... [-- ARGS...]"
3444 #define start_stop_daemon_full_usage "\n\n" \
3445 "Search for matching processes, and then\n" \
3446 "-K: stop all matching processes.\n" \
3447 "-S: start a process unless a matching process is found.\n" \
3448 IF_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
3449 "\nProcess matching:" \
3450 "\n -u,--user USERNAME|UID Match only this user's processes" \
3451 "\n -n,--name NAME Match processes with NAME" \
3452 "\n in comm field in /proc/PID/stat" \
3453 "\n -x,--exec EXECUTABLE Match processes with this command" \
3454 "\n in /proc/PID/cmdline" \
3455 "\n -p,--pidfile FILE Match a process with PID from the file" \
3456 "\n All specified conditions must match" \
3458 "\n -x,--exec EXECUTABLE Program to run" \
3459 "\n -a,--startas NAME Zeroth argument" \
3460 "\n -b,--background Background" \
3461 IF_FEATURE_START_STOP_DAEMON_FANCY( \
3462 "\n -N,--nicelevel N Change nice level" \
3464 "\n -c,--chuid USER[:[GRP]] Change to user/group" \
3465 "\n -m,--make-pidfile Write PID to the pidfile specified by -p" \
3467 "\n -s,--signal SIG Signal to send" \
3468 "\n -t,--test Match only, exit with 0 if a process is found" \
3470 IF_FEATURE_START_STOP_DAEMON_FANCY( \
3471 "\n -o,--oknodo Exit with status 0 if nothing is done" \
3472 "\n -v,--verbose Verbose" \
3474 "\n -q,--quiet Quiet" \
3476 IF_NOT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
3477 "\nProcess matching:" \
3478 "\n -u USERNAME|UID Match only this user's processes" \
3479 "\n -n NAME Match processes with NAME" \
3480 "\n in comm field in /proc/PID/stat" \
3481 "\n -x EXECUTABLE Match processes with this command" \
3482 "\n command in /proc/PID/cmdline" \
3483 "\n -p FILE Match a process with PID from the file" \
3484 "\n All specified conditions must match" \
3486 "\n -x EXECUTABLE Program to run" \
3487 "\n -a NAME Zeroth argument" \
3488 "\n -b Background" \
3489 IF_FEATURE_START_STOP_DAEMON_FANCY( \
3490 "\n -N N Change nice level" \
3492 "\n -c USER[:[GRP]] Change to user/group" \
3493 "\n -m Write PID to the pidfile specified by -p" \
3495 "\n -s SIG Signal to send" \
3496 "\n -t Match only, exit with 0 if a process is found" \
3498 IF_FEATURE_START_STOP_DAEMON_FANCY( \
3499 "\n -o Exit with status 0 if nothing is done" \
3505 #define stat_trivial_usage \
3507 #define stat_full_usage "\n\n" \
3508 "Display file (default) or filesystem status\n" \
3510 IF_FEATURE_STAT_FORMAT( \
3511 "\n -c fmt Use the specified format" \
3513 "\n -f Display filesystem status" \
3514 "\n -L Follow links" \
3515 "\n -t Display info in terse form" \
3517 "\n -Z Print security context" \
3519 IF_FEATURE_STAT_FORMAT( \
3520 "\n\nValid format sequences for files:\n" \
3521 " %a Access rights in octal\n" \
3522 " %A Access rights in human readable form\n" \
3523 " %b Number of blocks allocated (see %B)\n" \
3524 " %B The size in bytes of each block reported by %b\n" \
3525 " %d Device number in decimal\n" \
3526 " %D Device number in hex\n" \
3527 " %f Raw mode in hex\n" \
3529 " %g Group ID of owner\n" \
3530 " %G Group name of owner\n" \
3531 " %h Number of hard links\n" \
3532 " %i Inode number\n" \
3534 " %N File name, with -> TARGET if symlink\n" \
3535 " %o I/O block size\n" \
3536 " %s Total size, in bytes\n" \
3537 " %t Major device type in hex\n" \
3538 " %T Minor device type in hex\n" \
3539 " %u User ID of owner\n" \
3540 " %U User name of owner\n" \
3541 " %x Time of last access\n" \
3542 " %X Time of last access as seconds since Epoch\n" \
3543 " %y Time of last modification\n" \
3544 " %Y Time of last modification as seconds since Epoch\n" \
3545 " %z Time of last change\n" \
3546 " %Z Time of last change as seconds since Epoch\n" \
3547 "\nValid format sequences for file systems:\n" \
3548 " %a Free blocks available to non-superuser\n" \
3549 " %b Total data blocks in file system\n" \
3550 " %c Total file nodes in file system\n" \
3551 " %d Free file nodes in file system\n" \
3552 " %f Free blocks in file system\n" \
3554 " %C Security context in selinux\n" \
3556 " %i File System ID in hex\n" \
3557 " %l Maximum length of filenames\n" \
3559 " %s Block size (for faster transfer)\n" \
3560 " %S Fundamental block size (for block counts)\n" \
3561 " %t Type in hex\n" \
3562 " %T Type in human readable form" \
3565 #define strings_trivial_usage \
3566 "[-afo] [-n LEN] [FILE]..."
3567 #define strings_full_usage "\n\n" \
3568 "Display printable strings in a binary file\n" \
3570 "\n -a Scan whole file (default)" \
3571 "\n -f Precede strings with filenames" \
3572 "\n -n LEN At least LEN characters form a string (default 4)" \
3573 "\n -o Precede strings with decimal offsets" \
3575 #define stty_trivial_usage \
3576 "[-a|g] [-F DEVICE] [SETTING]..."
3577 #define stty_full_usage "\n\n" \
3578 "Without arguments, prints baud rate, line discipline,\n" \
3579 "and deviations from stty sane\n" \
3581 "\n -F DEVICE Open device instead of stdin" \
3582 "\n -a Print all current settings in human-readable form" \
3583 "\n -g Print in stty-readable form" \
3584 "\n [SETTING] See manpage" \
3586 #define su_trivial_usage \
3587 "[OPTIONS] [-] [USERNAME]"
3588 #define su_full_usage "\n\n" \
3589 "Change user id or become root\n" \
3591 "\n -p,-m Preserve environment" \
3592 "\n -c CMD Command to pass to 'sh -c'" \
3593 "\n -s SH Shell to use instead of default shell" \
3595 #define sulogin_trivial_usage \
3597 #define sulogin_full_usage "\n\n" \
3598 "Single user login\n" \
3602 #define sum_trivial_usage \
3604 #define sum_full_usage "\n\n" \
3605 "Checksum and count the blocks in a file\n" \
3607 "\n -r Use BSD sum algorithm (1K blocks)" \
3608 "\n -s Use System V sum algorithm (512byte blocks)" \
3610 #define sv_trivial_usage \
3611 "[-v] [-w SEC] CMD SERVICE_DIR..."
3612 #define sv_full_usage "\n\n" \
3613 "Control services monitored by runsv supervisor.\n" \
3614 "Commands (only first character is enough):\n" \
3616 "status: query service status\n" \
3617 "up: if service isn't running, start it. If service stops, restart it\n" \
3618 "once: like 'up', but if service stops, don't restart it\n" \
3619 "down: send TERM and CONT signals. If ./run exits, start ./finish\n" \
3620 " if it exists. After it stops, don't restart service\n" \
3621 "exit: send TERM and CONT signals to service and log service. If they exit,\n" \
3622 " runsv exits too\n" \
3623 "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \
3624 "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \
3626 #define svlogd_trivial_usage \
3627 "[-ttv] [-r C] [-R CHARS] [-l MATCHLEN] [-b BUFLEN] DIR..."
3628 #define svlogd_full_usage "\n\n" \
3629 "Continuously read log data from stdin, optionally\n" \
3630 "filter log messages, and write the data to one or more automatically\n" \
3633 #define swapoff_trivial_usage \
3635 #define swapoff_full_usage "\n\n" \
3636 "Stop swapping on DEVICE\n" \
3638 "\n -a Stop swapping on all swap devices" \
3640 #define swapon_trivial_usage \
3641 "[-a]" IF_FEATURE_SWAPON_PRI(" [-p PRI]") " [DEVICE]"
3642 #define swapon_full_usage "\n\n" \
3643 "Start swapping on DEVICE\n" \
3645 "\n -a Start swapping on all swap devices" \
3646 IF_FEATURE_SWAPON_PRI( \
3647 "\n -p PRI Set swap device priority" \
3650 #define switch_root_trivial_usage \
3651 "[-c /dev/console] NEW_ROOT NEW_INIT [ARGS]"
3652 #define switch_root_full_usage "\n\n" \
3653 "Free initramfs and switch to another root fs:\n" \
3654 "chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,\n" \
3655 "execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.\n" \
3657 "\n -c DEV Reopen stdio to DEV after switch" \
3659 #define sync_trivial_usage \
3661 #define sync_full_usage "\n\n" \
3662 "Write all buffered blocks to disk"
3664 #define fsync_trivial_usage \
3666 #define fsync_full_usage "\n\n" \
3667 "Write files' buffered blocks to disk\n" \
3669 "\n -d Avoid syncing metadata"
3671 #define sysctl_trivial_usage \
3672 "[OPTIONS] [VALUE]..."
3673 #define sysctl_full_usage "\n\n" \
3674 "Configure kernel parameters at runtime\n" \
3676 "\n -n Don't print key names" \
3677 "\n -e Don't warn about unknown keys" \
3678 "\n -w Change sysctl setting" \
3679 "\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \
3680 "\n -a Display all values" \
3681 "\n -A Display all values in table form" \
3683 #define sysctl_example_usage \
3684 "sysctl [-n] [-e] variable...\n" \
3685 "sysctl [-n] [-e] -w variable=value...\n" \
3686 "sysctl [-n] [-e] -a\n" \
3687 "sysctl [-n] [-e] -p file (default /etc/sysctl.conf)\n" \
3688 "sysctl [-n] [-e] -A\n"
3690 #define syslogd_trivial_usage \
3692 #define syslogd_full_usage "\n\n" \
3693 "System logging utility.\n" \
3694 "This version of syslogd ignores /etc/syslog.conf\n" \
3696 "\n -n Run in foreground" \
3697 "\n -O FILE Log to given file (default:/var/log/messages)" \
3698 "\n -l N Set local log level" \
3699 "\n -S Smaller logging output" \
3700 IF_FEATURE_ROTATE_LOGFILE( \
3701 "\n -s SIZE Max size (KB) before rotate (default:200KB, 0=off)" \
3702 "\n -b N N rotated logs to keep (default:1, max=99, 0=purge)") \
3703 IF_FEATURE_REMOTE_LOG( \
3704 "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
3705 "\n -L Log locally and via network (default is network only if -R)") \
3706 IF_FEATURE_SYSLOGD_DUP( \
3707 "\n -D Drop duplicates") \
3708 IF_FEATURE_IPC_SYSLOG( \
3709 "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \
3710 /* NB: -Csize shouldn't have space (because size is optional) */
3711 /* "\n -m MIN Minutes between MARK lines (default:20, 0=off)" */
3713 #define syslogd_example_usage \
3714 "$ syslogd -R masterlog:514\n" \
3715 "$ syslogd -R 192.168.1.1:601\n"
3717 #define tac_trivial_usage \
3719 #define tac_full_usage "\n\n" \
3720 "Concatenate FILEs and print them in reverse"
3722 #define taskset_trivial_usage \
3723 "[-p] [MASK] [PID | PROG ARGS]"
3724 #define taskset_full_usage "\n\n" \
3725 "Set or get CPU affinity\n" \
3727 "\n -p Operate on an existing PID" \
3729 #define taskset_example_usage \
3730 "$ taskset 0x7 ./dgemm_test&\n" \
3731 "$ taskset -p 0x1 $!\n" \
3732 "pid 4790's current affinity mask: 7\n" \
3733 "pid 4790's new affinity mask: 1\n" \
3734 "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
3735 "pid 6671's current affinity mask: 1\n" \
3736 "pid 6671's new affinity mask: 1\n" \
3737 "$ taskset -p 1\n" \
3738 "pid 1's current affinity mask: 3\n"
3740 #define tee_trivial_usage \
3742 #define tee_full_usage "\n\n" \
3743 "Copy stdin to each FILE, and also to stdout\n" \
3745 "\n -a Append to the given FILEs, don't overwrite" \
3746 "\n -i Ignore interrupt signals (SIGINT)" \
3748 #define tee_example_usage \
3749 "$ echo \"Hello\" | tee /tmp/foo\n" \
3750 "$ cat /tmp/foo\n" \
3753 #if ENABLE_FEATURE_TELNET_AUTOLOGIN
3754 #define telnet_trivial_usage \
3755 "[-a] [-l USER] HOST [PORT]"
3756 #define telnet_full_usage "\n\n" \
3757 "Connect to telnet server\n" \
3759 "\n -a Automatic login with $USER variable" \
3760 "\n -l USER Automatic login as USER" \
3763 #define telnet_trivial_usage \
3765 #define telnet_full_usage "\n\n" \
3766 "Connect to telnet server"
3769 #define telnetd_trivial_usage \
3771 #define telnetd_full_usage "\n\n" \
3772 "Handle incoming telnet connections" \
3773 IF_NOT_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \
3775 "\n -l LOGIN Exec LOGIN on connect" \
3776 "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
3777 "\n -K Close connection as soon as login exits" \
3778 "\n (normally wait until all programs close slave pty)" \
3779 IF_FEATURE_TELNETD_STANDALONE( \
3780 "\n -p PORT Port to listen on" \
3781 "\n -b ADDR[:PORT] Address to bind to" \
3782 "\n -F Run in foreground" \
3783 "\n -i Inetd mode" \
3784 IF_FEATURE_TELNETD_INETD_WAIT( \
3785 "\n -w SEC Inetd 'wait' mode, linger time SEC" \
3786 "\n -S Log to syslog (implied by -i or without -F and -w)" \
3790 /* "test --help" does not print help (POSIX compat), only "[ --help" does.
3791 * We display "<applet> EXPRESSION ]" here (not "<applet> EXPRESSION")
3792 * Unfortunately, it screws up generated BusyBox.html. TODO. */
3793 #define test_trivial_usage \
3795 #define test_full_usage "\n\n" \
3796 "Check file types, compare values etc. Return a 0/1 exit code\n" \
3797 "depending on logical value of EXPRESSION"
3798 #define test_example_usage \
3799 "$ test 1 -eq 2\n" \
3802 "$ test 1 -eq 1\n" \
3808 "$ [ -d /junk ]\n" \
3812 #define tc_trivial_usage \
3813 /*"[OPTIONS] "*/"OBJECT CMD [dev STRING]"
3814 #define tc_full_usage "\n\n" \
3815 "OBJECT: {qdisc|class|filter}\n" \
3816 "CMD: {add|del|change|replace|show}\n" \
3818 "qdisc [ handle QHANDLE ] [ root |"IF_FEATURE_TC_INGRESS(" ingress |")" parent CLASSID ]\n" \
3819 /* "[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
3820 " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
3821 " QDISC_KIND := { [p|b]fifo | tbf | prio | cbq | red | etc. }\n" \
3822 "qdisc show [ dev STRING ]"IF_FEATURE_TC_INGRESS(" [ingress]")"\n" \
3823 "class [ classid CLASSID ] [ root | parent CLASSID ]\n" \
3824 " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
3825 "class show [ dev STRING ] [ root | parent CLASSID ]\n" \
3826 "filter [ pref PRIO ] [ protocol PROTO ]\n" \
3827 /* "\t[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
3828 " [ root | classid CLASSID ] [ handle FILTERID ]\n" \
3829 " [ [ FILTER_TYPE ] [ help | OPTIONS ] ]\n" \
3830 "filter show [ dev STRING ] [ root | parent CLASSID ]"
3832 #define tcpsvd_trivial_usage \
3833 "[-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG"
3834 /* with not-implemented options: */
3835 /* "[-hpEvv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] [-i DIR|-x CDB] [-t SEC] IP PORT PROG" */
3836 #define tcpsvd_full_usage "\n\n" \
3837 "Create TCP socket, bind to IP:PORT and listen\n" \
3838 "for incoming connection. Run PROG for each connection.\n" \
3839 "\n IP IP to listen on. '0' = all" \
3840 "\n PORT Port to listen on" \
3841 "\n PROG ARGS Program to run" \
3842 "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
3843 "\n -u USER[:GRP] Change to user/group after bind" \
3844 "\n -c N Handle up to N connections simultaneously" \
3845 "\n -b N Allow a backlog of approximately N TCP SYNs" \
3846 "\n -C N[:MSG] Allow only up to N connections from the same IP." \
3847 "\n New connections from this IP address are closed" \
3848 "\n immediately. MSG is written to the peer before close" \
3849 "\n -h Look up peer's hostname" \
3850 "\n -E Don't set up environment variables" \
3853 #define udpsvd_trivial_usage \
3854 "[-hEv] [-c N] [-u USER] [-l NAME] IP PORT PROG"
3855 #define udpsvd_full_usage "\n\n" \
3856 "Create UDP socket, bind to IP:PORT and wait\n" \
3857 "for incoming packets. Run PROG for each packet,\n" \
3858 "redirecting all further packets with same peer ip:port to it.\n" \
3859 "\n IP IP to listen on. '0' = all" \
3860 "\n PORT Port to listen on" \
3861 "\n PROG ARGS Program to run" \
3862 "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
3863 "\n -u USER[:GRP] Change to user/group after bind" \
3864 "\n -c N Handle up to N connections simultaneously" \
3865 "\n -h Look up peer's hostname" \
3866 "\n -E Don't set up environment variables" \
3869 #define tftp_trivial_usage \
3870 "[OPTIONS] HOST [PORT]"
3871 #define tftp_full_usage "\n\n" \
3872 "Transfer a file from/to tftp server\n" \
3874 "\n -l FILE Local FILE" \
3875 "\n -r FILE Remote FILE" \
3876 IF_FEATURE_TFTP_GET( \
3879 IF_FEATURE_TFTP_PUT( \
3882 IF_FEATURE_TFTP_BLOCKSIZE( \
3883 "\n -b SIZE Transfer blocks of SIZE octets" \
3886 #define tftpd_trivial_usage \
3887 "[-cr] [-u USER] [DIR]"
3888 #define tftpd_full_usage "\n\n" \
3889 "Transfer a file on tftp client's request\n" \
3891 "tftpd should be used as an inetd service.\n" \
3892 "tftpd's line for inetd.conf:\n" \
3893 " 69 dgram udp nowait root tftpd tftpd /files/to/serve\n" \
3894 "It also can be ran from udpsvd:\n" \
3895 " udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n" \
3897 "\n -r Prohibit upload" \
3898 "\n -c Allow file creation via upload" \
3899 "\n -u Access files as USER" \
3901 #define time_trivial_usage \
3903 #define time_full_usage "\n\n" \
3904 "Run PROG, display resource usage when it exits\n" \
3908 #define timeout_trivial_usage \
3909 "[-t SECS] [-s SIG] PROG ARGS"
3910 #define timeout_full_usage "\n\n" \
3911 "Runs PROG. Sends SIG to it if it is not gone in SECS seconds.\n" \
3912 "Defaults: SECS: 10, SIG: TERM." \
3914 #define top_trivial_usage \
3915 "[-b] [-nCOUNT] [-dSECONDS]" IF_FEATURE_TOPMEM(" [-m]")
3916 #define top_full_usage "\n\n" \
3917 "Provide a view of process activity in real time.\n" \
3918 "Read the status of all processes from /proc each SECONDS\n" \
3919 "and display a screenful of them." \
3920 //TODO: add options and keyboard commands
3922 #define tr_trivial_usage \
3923 "[-cds] STRING1 [STRING2]"
3924 #define tr_full_usage "\n\n" \
3925 "Translate, squeeze, or delete characters from stdin, writing to stdout\n" \
3927 "\n -c Take complement of STRING1" \
3928 "\n -d Delete input characters coded STRING1" \
3929 "\n -s Squeeze multiple output characters of STRING2 into one character" \
3931 #define tr_example_usage \
3932 "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
3935 #define traceroute_trivial_usage \
3936 "[-"IF_TRACEROUTE6("46")"FIldnrv] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
3937 " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE]\n" \
3938 " [-z PAUSE_MSEC] HOST [BYTES]"
3939 #define traceroute_full_usage "\n\n" \
3940 "Trace the route to HOST\n" \
3943 "\n -4,-6 Force IP or IPv6 name resolution" \
3945 "\n -F Set the don't fragment bit" \
3946 "\n -I Use ICMP ECHO instead of UDP datagrams" \
3947 "\n -l Display the TTL value of the returned packet" \
3948 "\n -d Set SO_DEBUG options to socket" \
3949 "\n -n Print numeric addresses" \
3950 "\n -r Bypass routing tables, send directly to HOST" \
3952 "\n -m Max time-to-live (max number of hops)" \
3953 "\n -p Base UDP port number used in probes" \
3954 "\n (default 33434)" \
3955 "\n -q Number of probes per TTL (default 3)" \
3956 "\n -s IP address to use as the source address" \
3957 "\n -t Type-of-service in probe packets (default 0)" \
3958 "\n -w Time in seconds to wait for a response (default 3)" \
3959 "\n -g Loose source route gateway (8 max)" \
3961 #define traceroute6_trivial_usage \
3962 "[-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
3963 " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-i IFACE]\n" \
3965 #define traceroute6_full_usage "\n\n" \
3966 "Trace the route to HOST\n" \
3968 "\n -d Set SO_DEBUG options to socket" \
3969 "\n -n Print numeric addresses" \
3970 "\n -r Bypass routing tables, send directly to HOST" \
3972 "\n -m Max time-to-live (max number of hops)" \
3973 "\n -p Base UDP port number used in probes" \
3974 "\n (default is 33434)" \
3975 "\n -q Number of probes per TTL (default 3)" \
3976 "\n -s IP address to use as the source address" \
3977 "\n -t Type-of-service in probe packets (default 0)" \
3978 "\n -w Time in seconds to wait for a response (default 3)" \
3980 #define true_trivial_usage \
3982 #define true_full_usage "\n\n" \
3983 "Return an exit code of TRUE (0)"
3984 #define true_example_usage \
3989 #define tty_trivial_usage \
3991 #define tty_full_usage "\n\n" \
3992 "Print file name of stdin's terminal" \
3993 IF_INCLUDE_SUSv2( "\n" \
3995 "\n -s Print nothing, only return exit status" \
3997 #define tty_example_usage \
4001 #define ttysize_trivial_usage \
4003 #define ttysize_full_usage "\n\n" \
4004 "Print dimension(s) of stdin's terminal, on error return 80x25"
4006 #define tunctl_trivial_usage \
4007 "[-f device] ([-t name] | -d name)" IF_FEATURE_TUNCTL_UG(" [-u owner] [-g group] [-b]")
4008 #define tunctl_full_usage "\n\n" \
4009 "Create or delete tun interfaces\n" \
4011 "\n -f name tun device (/dev/net/tun)" \
4012 "\n -t name Create iface 'name'" \
4013 "\n -d name Delete iface 'name'" \
4014 IF_FEATURE_TUNCTL_UG( \
4015 "\n -u owner Set iface owner" \
4016 "\n -g group Set iface group" \
4017 "\n -b Brief output" \
4019 #define tunctl_example_usage \
4021 "# tunctl -d tun0\n"
4023 #define udhcpd_trivial_usage \
4024 "[-fS]" IF_FEATURE_UDHCP_PORT(" [-P N]") " [CONFFILE]" \
4026 #define udhcpd_full_usage "\n\n" \
4028 "\n -f Run in foreground" \
4029 "\n -S Log to syslog too" \
4030 IF_FEATURE_UDHCP_PORT( \
4031 "\n -P N Use port N (default 67)" \
4034 #define umount_trivial_usage \
4035 "[OPTIONS] FILESYSTEM|DIRECTORY"
4036 #define umount_full_usage "\n\n" \
4037 "Unmount file systems\n" \
4039 IF_FEATURE_UMOUNT_ALL( \
4040 "\n -a Unmount all file systems" IF_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
4042 IF_FEATURE_MTAB_SUPPORT( \
4043 "\n -n Don't erase /etc/mtab entries" \
4045 "\n -r Try to remount devices as read-only if mount is busy" \
4046 "\n -l Lazy umount (detach filesystem)" \
4047 "\n -f Force umount (i.e., unreachable NFS server)" \
4048 IF_FEATURE_MOUNT_LOOP( \
4049 "\n -d Free loop device if it has been used" \
4052 #define umount_example_usage \
4053 "$ umount /dev/hdc1\n"
4055 #define uname_trivial_usage \
4057 #define uname_full_usage "\n\n" \
4058 "Print system information\n" \
4061 "\n -m The machine (hardware) type" \
4063 "\n -r OS release" \
4064 "\n -s OS name (default)" \
4065 "\n -p Processor type" \
4066 "\n -v OS version" \
4068 #define uname_example_usage \
4070 "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
4072 #define uncompress_trivial_usage \
4074 #define uncompress_full_usage "\n\n" \
4075 "Decompress .Z file[s]\n" \
4077 "\n -c Write to stdout" \
4080 #define unexpand_trivial_usage \
4081 "[-fa][-t N] [FILE]..."
4082 #define unexpand_full_usage "\n\n" \
4083 "Convert spaces to tabs, writing to stdout\n" \
4085 IF_FEATURE_UNEXPAND_LONG_OPTIONS( \
4086 "\n -a,--all Convert all blanks" \
4087 "\n -f,--first-only Convert only leading blanks" \
4088 "\n -t,--tabs=N Tabstops every N chars" \
4090 IF_NOT_FEATURE_UNEXPAND_LONG_OPTIONS( \
4091 "\n -a Convert all blanks" \
4092 "\n -f Convert only leading blanks" \
4093 "\n -t N Tabstops every N chars" \
4096 #define uniq_trivial_usage \
4097 "[-cdu][-f,s,w N] [INPUT [OUTPUT]]"
4098 #define uniq_full_usage "\n\n" \
4099 "Discard duplicate lines\n" \
4101 "\n -c Prefix lines by the number of occurrences" \
4102 "\n -d Only print duplicate lines" \
4103 "\n -u Only print unique lines" \
4104 "\n -f N Skip first N fields" \
4105 "\n -s N Skip first N chars (after any skipped fields)" \
4106 "\n -w N Compare N characters in line" \
4108 #define uniq_example_usage \
4109 "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
4114 #define unzip_trivial_usage \
4115 "[-opts[modifiers]] FILE[.zip] [LIST] [-x XLIST] [-d DIR]"
4116 #define unzip_full_usage "\n\n" \
4117 "Extract files from ZIP archives\n" \
4119 "\n -l List archive contents (with -q for short form)" \
4120 "\n -n Never overwrite files (default)" \
4122 "\n -p Send output to stdout" \
4124 "\n -x XLST Exclude these files" \
4125 "\n -d DIR Extract files into DIR" \
4127 #define uptime_trivial_usage \
4129 #define uptime_full_usage "\n\n" \
4130 "Display the time since the last boot"
4132 #define uptime_example_usage \
4134 " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
4136 #define usleep_trivial_usage \
4138 #define usleep_full_usage "\n\n" \
4139 "Pause for N microseconds"
4141 #define usleep_example_usage \
4142 "$ usleep 1000000\n" \
4143 "[pauses for 1 second]\n"
4145 #define uudecode_trivial_usage \
4146 "[-o OUTFILE] [INFILE]"
4147 #define uudecode_full_usage "\n\n" \
4148 "Uudecode a file\n" \
4149 "Finds outfile name in uuencoded source unless -o is given"
4151 #define uudecode_example_usage \
4152 "$ uudecode -o busybox busybox.uu\n" \
4153 "$ ls -l busybox\n" \
4154 "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
4156 #define uuencode_trivial_usage \
4157 "[-m] [INFILE] STORED_FILENAME"
4158 #define uuencode_full_usage "\n\n" \
4159 "Uuencode a file to stdout\n" \
4161 "\n -m Use base64 encoding per RFC1521" \
4163 #define uuencode_example_usage \
4164 "$ uuencode busybox busybox\n" \
4165 "begin 755 busybox\n" \
4166 "<encoded file snipped>\n" \
4167 "$ uudecode busybox busybox > busybox.uu\n" \
4170 #define vconfig_trivial_usage \
4172 #define vconfig_full_usage "\n\n" \
4173 "Create and remove virtual ethernet devices\n" \
4175 "\n add [interface-name] [vlan_id]" \
4176 "\n rem [vlan-name]" \
4177 "\n set_flag [interface-name] [flag-num] [0 | 1]" \
4178 "\n set_egress_map [vlan-name] [skb_priority] [vlan_qos]" \
4179 "\n set_ingress_map [vlan-name] [skb_priority] [vlan_qos]" \
4180 "\n set_name_type [name-type]" \
4182 #define vi_trivial_usage \
4183 "[OPTIONS] [FILE]..."
4184 #define vi_full_usage "\n\n" \
4187 IF_FEATURE_VI_COLON( \
4188 "\n -c Initial command to run ($EXINIT also available)" \
4190 IF_FEATURE_VI_READONLY( \
4193 "\n -H Short help regarding available features" \
4195 #define vlock_trivial_usage \
4197 #define vlock_full_usage "\n\n" \
4198 "Lock a virtual terminal. A password is required to unlock.\n" \
4200 "\n -a Lock all VTs" \
4202 #define volname_trivial_usage \
4204 #define volname_full_usage "\n\n" \
4205 "Show CD volume name of the DEVICE (default /dev/cdrom)"
4207 #define wall_trivial_usage \
4209 #define wall_full_usage "\n\n" \
4210 "Write content of FILE or stdin to all logged-in users"
4211 #define wall_sample_usage \
4212 "echo foo | wall\n" \
4215 #define watch_trivial_usage \
4216 "[-n SEC] [-t] PROG ARGS"
4217 #define watch_full_usage "\n\n" \
4218 "Run PROG periodically\n" \
4220 "\n -n Loop period in seconds (default 2)" \
4221 "\n -t Don't print header" \
4223 #define watch_example_usage \
4225 "Mon Dec 17 10:31:40 GMT 2000\n" \
4226 "Mon Dec 17 10:31:42 GMT 2000\n" \
4227 "Mon Dec 17 10:31:44 GMT 2000"
4229 #define watchdog_trivial_usage \
4230 "[-t N[ms]] [-T N[ms]] [-F] DEV"
4231 #define watchdog_full_usage "\n\n" \
4232 "Periodically write to watchdog device DEV\n" \
4234 "\n -T N Reboot after N seconds if not reset (default 60)" \
4235 "\n -t N Reset every N seconds (default 30)" \
4236 "\n -F Run in foreground" \
4238 "\nUse 500ms to specify period in milliseconds" \
4240 #define wget_trivial_usage \
4241 IF_FEATURE_WGET_LONG_OPTIONS( \
4242 "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document FILE]\n" \
4243 " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
4244 " [--no-check-certificate] [-U|--user-agent AGENT]" \
4245 IF_FEATURE_WGET_TIMEOUT("[-T SEC] ") " URL" \
4247 IF_NOT_FEATURE_WGET_LONG_OPTIONS( \
4248 "[-csq] [-O FILE] [-Y on/off] [-P DIR] [-U AGENT]" \
4249 IF_FEATURE_WGET_TIMEOUT("[-T SEC] ") " URL" \
4251 #define wget_full_usage "\n\n" \
4252 "Retrieve files via HTTP or FTP\n" \
4254 "\n -s Spider mode - only check file existence" \
4255 "\n -c Continue retrieval of aborted transfer" \
4257 "\n -P DIR Save to DIR (default .)" \
4258 IF_FEATURE_WGET_TIMEOUT( \
4259 "\n -T SEC Network read timeout is SEC seconds" \
4261 "\n -O FILE Save to FILE ('-' for stdout)" \
4262 "\n -U STR Use STR for User-Agent header" \
4263 "\n -Y Use proxy ('on' or 'off')" \
4265 #define which_trivial_usage \
4267 #define which_full_usage "\n\n" \
4269 #define which_example_usage \
4273 #define who_trivial_usage \
4275 #define who_full_usage "\n\n" \
4276 "Show who is logged on\n" \
4280 #define whoami_trivial_usage \
4282 #define whoami_full_usage "\n\n" \
4283 "Print the user name associated with the current effective user id"
4285 #define zcat_trivial_usage \
4287 #define zcat_full_usage "\n\n" \
4288 "Decompress to stdout"
4290 #define zcip_trivial_usage \
4291 "[OPTIONS] IFACE SCRIPT"
4292 #define zcip_full_usage "\n\n" \
4293 "Manage a ZeroConf IPv4 link-local address\n" \
4295 "\n -f Run in foreground" \
4296 "\n -q Quit after obtaining address" \
4297 "\n -r 169.254.x.x Request this address first" \
4300 "\nWith no -q, runs continuously monitoring for ARP conflicts," \
4301 "\nexits only on I/O errors (link down etc)" \