RISCV: config: tizen_visionfive2: Enable USB_DUMMY_HCD as module for usb hcd tetst
[platform/kernel/linux-starfive.git] / include / ufs / ufshcd.h
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Universal Flash Storage Host controller driver
4  * Copyright (C) 2011-2013 Samsung India Software Operations
5  * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
6  *
7  * Authors:
8  *      Santosh Yaraganavi <santosh.sy@samsung.com>
9  *      Vinayak Holikatti <h.vinayak@samsung.com>
10  */
11
12 #ifndef _UFSHCD_H
13 #define _UFSHCD_H
14
15 #include <linux/bitfield.h>
16 #include <linux/blk-crypto-profile.h>
17 #include <linux/blk-mq.h>
18 #include <linux/devfreq.h>
19 #include <linux/pm_runtime.h>
20 #include <scsi/scsi_device.h>
21 #include <ufs/unipro.h>
22 #include <ufs/ufs.h>
23 #include <ufs/ufs_quirks.h>
24 #include <ufs/ufshci.h>
25
26 #define UFSHCD "ufshcd"
27
28 struct ufs_hba;
29
30 enum dev_cmd_type {
31         DEV_CMD_TYPE_NOP                = 0x0,
32         DEV_CMD_TYPE_QUERY              = 0x1,
33 };
34
35 enum ufs_event_type {
36         /* uic specific errors */
37         UFS_EVT_PA_ERR = 0,
38         UFS_EVT_DL_ERR,
39         UFS_EVT_NL_ERR,
40         UFS_EVT_TL_ERR,
41         UFS_EVT_DME_ERR,
42
43         /* fatal errors */
44         UFS_EVT_AUTO_HIBERN8_ERR,
45         UFS_EVT_FATAL_ERR,
46         UFS_EVT_LINK_STARTUP_FAIL,
47         UFS_EVT_RESUME_ERR,
48         UFS_EVT_SUSPEND_ERR,
49         UFS_EVT_WL_SUSP_ERR,
50         UFS_EVT_WL_RES_ERR,
51
52         /* abnormal events */
53         UFS_EVT_DEV_RESET,
54         UFS_EVT_HOST_RESET,
55         UFS_EVT_ABORT,
56
57         UFS_EVT_CNT,
58 };
59
60 /**
61  * struct uic_command - UIC command structure
62  * @command: UIC command
63  * @argument1: UIC command argument 1
64  * @argument2: UIC command argument 2
65  * @argument3: UIC command argument 3
66  * @cmd_active: Indicate if UIC command is outstanding
67  * @done: UIC command completion
68  */
69 struct uic_command {
70         u32 command;
71         u32 argument1;
72         u32 argument2;
73         u32 argument3;
74         int cmd_active;
75         struct completion done;
76 };
77
78 /* Used to differentiate the power management options */
79 enum ufs_pm_op {
80         UFS_RUNTIME_PM,
81         UFS_SYSTEM_PM,
82         UFS_SHUTDOWN_PM,
83 };
84
85 /* Host <-> Device UniPro Link state */
86 enum uic_link_state {
87         UIC_LINK_OFF_STATE      = 0, /* Link powered down or disabled */
88         UIC_LINK_ACTIVE_STATE   = 1, /* Link is in Fast/Slow/Sleep state */
89         UIC_LINK_HIBERN8_STATE  = 2, /* Link is in Hibernate state */
90         UIC_LINK_BROKEN_STATE   = 3, /* Link is in broken state */
91 };
92
93 #define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE)
94 #define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \
95                                     UIC_LINK_ACTIVE_STATE)
96 #define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \
97                                     UIC_LINK_HIBERN8_STATE)
98 #define ufshcd_is_link_broken(hba) ((hba)->uic_link_state == \
99                                    UIC_LINK_BROKEN_STATE)
100 #define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE)
101 #define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
102                                     UIC_LINK_ACTIVE_STATE)
103 #define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
104                                     UIC_LINK_HIBERN8_STATE)
105 #define ufshcd_set_link_broken(hba) ((hba)->uic_link_state = \
106                                     UIC_LINK_BROKEN_STATE)
107
108 #define ufshcd_set_ufs_dev_active(h) \
109         ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE)
110 #define ufshcd_set_ufs_dev_sleep(h) \
111         ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE)
112 #define ufshcd_set_ufs_dev_poweroff(h) \
113         ((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE)
114 #define ufshcd_set_ufs_dev_deepsleep(h) \
115         ((h)->curr_dev_pwr_mode = UFS_DEEPSLEEP_PWR_MODE)
116 #define ufshcd_is_ufs_dev_active(h) \
117         ((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE)
118 #define ufshcd_is_ufs_dev_sleep(h) \
119         ((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE)
120 #define ufshcd_is_ufs_dev_poweroff(h) \
121         ((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)
122 #define ufshcd_is_ufs_dev_deepsleep(h) \
123         ((h)->curr_dev_pwr_mode == UFS_DEEPSLEEP_PWR_MODE)
124
125 /*
126  * UFS Power management levels.
127  * Each level is in increasing order of power savings, except DeepSleep
128  * which is lower than PowerDown with power on but not PowerDown with
129  * power off.
130  */
131 enum ufs_pm_level {
132         UFS_PM_LVL_0,
133         UFS_PM_LVL_1,
134         UFS_PM_LVL_2,
135         UFS_PM_LVL_3,
136         UFS_PM_LVL_4,
137         UFS_PM_LVL_5,
138         UFS_PM_LVL_6,
139         UFS_PM_LVL_MAX
140 };
141
142 struct ufs_pm_lvl_states {
143         enum ufs_dev_pwr_mode dev_state;
144         enum uic_link_state link_state;
145 };
146
147 /**
148  * struct ufshcd_lrb - local reference block
149  * @utr_descriptor_ptr: UTRD address of the command
150  * @ucd_req_ptr: UCD address of the command
151  * @ucd_rsp_ptr: Response UPIU address for this command
152  * @ucd_prdt_ptr: PRDT address of the command
153  * @utrd_dma_addr: UTRD dma address for debug
154  * @ucd_prdt_dma_addr: PRDT dma address for debug
155  * @ucd_rsp_dma_addr: UPIU response dma address for debug
156  * @ucd_req_dma_addr: UPIU request dma address for debug
157  * @cmd: pointer to SCSI command
158  * @scsi_status: SCSI status of the command
159  * @command_type: SCSI, UFS, Query.
160  * @task_tag: Task tag of the command
161  * @lun: LUN of the command
162  * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
163  * @issue_time_stamp: time stamp for debug purposes (CLOCK_MONOTONIC)
164  * @issue_time_stamp_local_clock: time stamp for debug purposes (local_clock)
165  * @compl_time_stamp: time stamp for statistics (CLOCK_MONOTONIC)
166  * @compl_time_stamp_local_clock: time stamp for debug purposes (local_clock)
167  * @crypto_key_slot: the key slot to use for inline crypto (-1 if none)
168  * @data_unit_num: the data unit number for the first block for inline crypto
169  * @req_abort_skip: skip request abort task flag
170  */
171 struct ufshcd_lrb {
172         struct utp_transfer_req_desc *utr_descriptor_ptr;
173         struct utp_upiu_req *ucd_req_ptr;
174         struct utp_upiu_rsp *ucd_rsp_ptr;
175         struct ufshcd_sg_entry *ucd_prdt_ptr;
176
177         dma_addr_t utrd_dma_addr;
178         dma_addr_t ucd_req_dma_addr;
179         dma_addr_t ucd_rsp_dma_addr;
180         dma_addr_t ucd_prdt_dma_addr;
181
182         struct scsi_cmnd *cmd;
183         int scsi_status;
184
185         int command_type;
186         int task_tag;
187         u8 lun; /* UPIU LUN id field is only 8-bit wide */
188         bool intr_cmd;
189         ktime_t issue_time_stamp;
190         u64 issue_time_stamp_local_clock;
191         ktime_t compl_time_stamp;
192         u64 compl_time_stamp_local_clock;
193 #ifdef CONFIG_SCSI_UFS_CRYPTO
194         int crypto_key_slot;
195         u64 data_unit_num;
196 #endif
197
198         bool req_abort_skip;
199 };
200
201 /**
202  * struct ufs_query - holds relevant data structures for query request
203  * @request: request upiu and function
204  * @descriptor: buffer for sending/receiving descriptor
205  * @response: response upiu and response
206  */
207 struct ufs_query {
208         struct ufs_query_req request;
209         u8 *descriptor;
210         struct ufs_query_res response;
211 };
212
213 /**
214  * struct ufs_dev_cmd - all assosiated fields with device management commands
215  * @type: device management command type - Query, NOP OUT
216  * @lock: lock to allow one command at a time
217  * @complete: internal commands completion
218  * @query: Device management query information
219  */
220 struct ufs_dev_cmd {
221         enum dev_cmd_type type;
222         struct mutex lock;
223         struct completion *complete;
224         struct ufs_query query;
225 };
226
227 /**
228  * struct ufs_clk_info - UFS clock related info
229  * @list: list headed by hba->clk_list_head
230  * @clk: clock node
231  * @name: clock name
232  * @max_freq: maximum frequency supported by the clock
233  * @min_freq: min frequency that can be used for clock scaling
234  * @curr_freq: indicates the current frequency that it is set to
235  * @keep_link_active: indicates that the clk should not be disabled if
236  *                    link is active
237  * @enabled: variable to check against multiple enable/disable
238  */
239 struct ufs_clk_info {
240         struct list_head list;
241         struct clk *clk;
242         const char *name;
243         u32 max_freq;
244         u32 min_freq;
245         u32 curr_freq;
246         bool keep_link_active;
247         bool enabled;
248 };
249
250 enum ufs_notify_change_status {
251         PRE_CHANGE,
252         POST_CHANGE,
253 };
254
255 struct ufs_pa_layer_attr {
256         u32 gear_rx;
257         u32 gear_tx;
258         u32 lane_rx;
259         u32 lane_tx;
260         u32 pwr_rx;
261         u32 pwr_tx;
262         u32 hs_rate;
263 };
264
265 struct ufs_pwr_mode_info {
266         bool is_valid;
267         struct ufs_pa_layer_attr info;
268 };
269
270 /**
271  * struct ufs_hba_variant_ops - variant specific callbacks
272  * @name: variant name
273  * @init: called when the driver is initialized
274  * @exit: called to cleanup everything done in init
275  * @get_ufs_hci_version: called to get UFS HCI version
276  * @clk_scale_notify: notifies that clks are scaled up/down
277  * @setup_clocks: called before touching any of the controller registers
278  * @hce_enable_notify: called before and after HCE enable bit is set to allow
279  *                     variant specific Uni-Pro initialization.
280  * @link_startup_notify: called before and after Link startup is carried out
281  *                       to allow variant specific Uni-Pro initialization.
282  * @pwr_change_notify: called before and after a power mode change
283  *                      is carried out to allow vendor spesific capabilities
284  *                      to be set.
285  * @setup_xfer_req: called before any transfer request is issued
286  *                  to set some things
287  * @setup_task_mgmt: called before any task management request is issued
288  *                  to set some things
289  * @hibern8_notify: called around hibern8 enter/exit
290  * @apply_dev_quirks: called to apply device specific quirks
291  * @fixup_dev_quirks: called to modify device specific quirks
292  * @suspend: called during host controller PM callback
293  * @resume: called during host controller PM callback
294  * @dbg_register_dump: used to dump controller debug information
295  * @phy_initialization: used to initialize phys
296  * @device_reset: called to issue a reset pulse on the UFS device
297  * @config_scaling_param: called to configure clock scaling parameters
298  * @program_key: program or evict an inline encryption key
299  * @event_notify: called to notify important events
300  */
301 struct ufs_hba_variant_ops {
302         const char *name;
303         int     (*init)(struct ufs_hba *);
304         void    (*exit)(struct ufs_hba *);
305         u32     (*get_ufs_hci_version)(struct ufs_hba *);
306         int     (*clk_scale_notify)(struct ufs_hba *, bool,
307                                     enum ufs_notify_change_status);
308         int     (*setup_clocks)(struct ufs_hba *, bool,
309                                 enum ufs_notify_change_status);
310         int     (*hce_enable_notify)(struct ufs_hba *,
311                                      enum ufs_notify_change_status);
312         int     (*link_startup_notify)(struct ufs_hba *,
313                                        enum ufs_notify_change_status);
314         int     (*pwr_change_notify)(struct ufs_hba *,
315                                         enum ufs_notify_change_status status,
316                                         struct ufs_pa_layer_attr *,
317                                         struct ufs_pa_layer_attr *);
318         void    (*setup_xfer_req)(struct ufs_hba *hba, int tag,
319                                   bool is_scsi_cmd);
320         void    (*setup_task_mgmt)(struct ufs_hba *, int, u8);
321         void    (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme,
322                                         enum ufs_notify_change_status);
323         int     (*apply_dev_quirks)(struct ufs_hba *hba);
324         void    (*fixup_dev_quirks)(struct ufs_hba *hba);
325         int     (*suspend)(struct ufs_hba *, enum ufs_pm_op,
326                                         enum ufs_notify_change_status);
327         int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
328         void    (*dbg_register_dump)(struct ufs_hba *hba);
329         int     (*phy_initialization)(struct ufs_hba *);
330         int     (*device_reset)(struct ufs_hba *hba);
331         void    (*config_scaling_param)(struct ufs_hba *hba,
332                                 struct devfreq_dev_profile *profile,
333                                 struct devfreq_simple_ondemand_data *data);
334         int     (*program_key)(struct ufs_hba *hba,
335                                const union ufs_crypto_cfg_entry *cfg, int slot);
336         void    (*event_notify)(struct ufs_hba *hba,
337                                 enum ufs_event_type evt, void *data);
338 };
339
340 /* clock gating state  */
341 enum clk_gating_state {
342         CLKS_OFF,
343         CLKS_ON,
344         REQ_CLKS_OFF,
345         REQ_CLKS_ON,
346 };
347
348 /**
349  * struct ufs_clk_gating - UFS clock gating related info
350  * @gate_work: worker to turn off clocks after some delay as specified in
351  * delay_ms
352  * @ungate_work: worker to turn on clocks that will be used in case of
353  * interrupt context
354  * @state: the current clocks state
355  * @delay_ms: gating delay in ms
356  * @is_suspended: clk gating is suspended when set to 1 which can be used
357  * during suspend/resume
358  * @delay_attr: sysfs attribute to control delay_attr
359  * @enable_attr: sysfs attribute to enable/disable clock gating
360  * @is_enabled: Indicates the current status of clock gating
361  * @is_initialized: Indicates whether clock gating is initialized or not
362  * @active_reqs: number of requests that are pending and should be waited for
363  * completion before gating clocks.
364  * @clk_gating_workq: workqueue for clock gating work.
365  */
366 struct ufs_clk_gating {
367         struct delayed_work gate_work;
368         struct work_struct ungate_work;
369         enum clk_gating_state state;
370         unsigned long delay_ms;
371         bool is_suspended;
372         struct device_attribute delay_attr;
373         struct device_attribute enable_attr;
374         bool is_enabled;
375         bool is_initialized;
376         int active_reqs;
377         struct workqueue_struct *clk_gating_workq;
378 };
379
380 struct ufs_saved_pwr_info {
381         struct ufs_pa_layer_attr info;
382         bool is_valid;
383 };
384
385 /**
386  * struct ufs_clk_scaling - UFS clock scaling related data
387  * @active_reqs: number of requests that are pending. If this is zero when
388  * devfreq ->target() function is called then schedule "suspend_work" to
389  * suspend devfreq.
390  * @tot_busy_t: Total busy time in current polling window
391  * @window_start_t: Start time (in jiffies) of the current polling window
392  * @busy_start_t: Start time of current busy period
393  * @enable_attr: sysfs attribute to enable/disable clock scaling
394  * @saved_pwr_info: UFS power mode may also be changed during scaling and this
395  * one keeps track of previous power mode.
396  * @workq: workqueue to schedule devfreq suspend/resume work
397  * @suspend_work: worker to suspend devfreq
398  * @resume_work: worker to resume devfreq
399  * @min_gear: lowest HS gear to scale down to
400  * @is_enabled: tracks if scaling is currently enabled or not, controlled by
401  *              clkscale_enable sysfs node
402  * @is_allowed: tracks if scaling is currently allowed or not, used to block
403  *              clock scaling which is not invoked from devfreq governor
404  * @is_initialized: Indicates whether clock scaling is initialized or not
405  * @is_busy_started: tracks if busy period has started or not
406  * @is_suspended: tracks if devfreq is suspended or not
407  */
408 struct ufs_clk_scaling {
409         int active_reqs;
410         unsigned long tot_busy_t;
411         ktime_t window_start_t;
412         ktime_t busy_start_t;
413         struct device_attribute enable_attr;
414         struct ufs_saved_pwr_info saved_pwr_info;
415         struct workqueue_struct *workq;
416         struct work_struct suspend_work;
417         struct work_struct resume_work;
418         u32 min_gear;
419         bool is_enabled;
420         bool is_allowed;
421         bool is_initialized;
422         bool is_busy_started;
423         bool is_suspended;
424 };
425
426 #define UFS_EVENT_HIST_LENGTH 8
427 /**
428  * struct ufs_event_hist - keeps history of errors
429  * @pos: index to indicate cyclic buffer position
430  * @val: cyclic buffer for registers value
431  * @tstamp: cyclic buffer for time stamp
432  * @cnt: error counter
433  */
434 struct ufs_event_hist {
435         int pos;
436         u32 val[UFS_EVENT_HIST_LENGTH];
437         u64 tstamp[UFS_EVENT_HIST_LENGTH];
438         unsigned long long cnt;
439 };
440
441 /**
442  * struct ufs_stats - keeps usage/err statistics
443  * @last_intr_status: record the last interrupt status.
444  * @last_intr_ts: record the last interrupt timestamp.
445  * @hibern8_exit_cnt: Counter to keep track of number of exits,
446  *              reset this after link-startup.
447  * @last_hibern8_exit_tstamp: Set time after the hibern8 exit.
448  *              Clear after the first successful command completion.
449  * @event: array with event history.
450  */
451 struct ufs_stats {
452         u32 last_intr_status;
453         u64 last_intr_ts;
454
455         u32 hibern8_exit_cnt;
456         u64 last_hibern8_exit_tstamp;
457         struct ufs_event_hist event[UFS_EVT_CNT];
458 };
459
460 /**
461  * enum ufshcd_state - UFS host controller state
462  * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command
463  *      processing.
464  * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process
465  *      SCSI commands.
466  * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled.
467  *      SCSI commands may be submitted to the controller.
468  * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail
469  *      newly submitted SCSI commands with error code DID_BAD_TARGET.
470  * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery
471  *      failed. Fail all SCSI commands with error code DID_ERROR.
472  */
473 enum ufshcd_state {
474         UFSHCD_STATE_RESET,
475         UFSHCD_STATE_OPERATIONAL,
476         UFSHCD_STATE_EH_SCHEDULED_NON_FATAL,
477         UFSHCD_STATE_EH_SCHEDULED_FATAL,
478         UFSHCD_STATE_ERROR,
479 };
480
481 enum ufshcd_quirks {
482         /* Interrupt aggregation support is broken */
483         UFSHCD_QUIRK_BROKEN_INTR_AGGR                   = 1 << 0,
484
485         /*
486          * delay before each dme command is required as the unipro
487          * layer has shown instabilities
488          */
489         UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS              = 1 << 1,
490
491         /*
492          * If UFS host controller is having issue in processing LCC (Line
493          * Control Command) coming from device then enable this quirk.
494          * When this quirk is enabled, host controller driver should disable
495          * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
496          * attribute of device to 0).
497          */
498         UFSHCD_QUIRK_BROKEN_LCC                         = 1 << 2,
499
500         /*
501          * The attribute PA_RXHSUNTERMCAP specifies whether or not the
502          * inbound Link supports unterminated line in HS mode. Setting this
503          * attribute to 1 fixes moving to HS gear.
504          */
505         UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP            = 1 << 3,
506
507         /*
508          * This quirk needs to be enabled if the host controller only allows
509          * accessing the peer dme attributes in AUTO mode (FAST AUTO or
510          * SLOW AUTO).
511          */
512         UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE          = 1 << 4,
513
514         /*
515          * This quirk needs to be enabled if the host controller doesn't
516          * advertise the correct version in UFS_VER register. If this quirk
517          * is enabled, standard UFS host driver will call the vendor specific
518          * ops (get_ufs_hci_version) to get the correct version.
519          */
520         UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION             = 1 << 5,
521
522         /*
523          * Clear handling for transfer/task request list is just opposite.
524          */
525         UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR                = 1 << 6,
526
527         /*
528          * This quirk needs to be enabled if host controller doesn't allow
529          * that the interrupt aggregation timer and counter are reset by s/w.
530          */
531         UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR               = 1 << 7,
532
533         /*
534          * This quirks needs to be enabled if host controller cannot be
535          * enabled via HCE register.
536          */
537         UFSHCI_QUIRK_BROKEN_HCE                         = 1 << 8,
538
539         /*
540          * This quirk needs to be enabled if the host controller regards
541          * resolution of the values of PRDTO and PRDTL in UTRD as byte.
542          */
543         UFSHCD_QUIRK_PRDT_BYTE_GRAN                     = 1 << 9,
544
545         /*
546          * This quirk needs to be enabled if the host controller reports
547          * OCS FATAL ERROR with device error through sense data
548          */
549         UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR             = 1 << 10,
550
551         /*
552          * This quirk needs to be enabled if the host controller has
553          * auto-hibernate capability but it doesn't work.
554          */
555         UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8                = 1 << 11,
556
557         /*
558          * This quirk needs to disable manual flush for write booster
559          */
560         UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL          = 1 << 12,
561
562         /*
563          * This quirk needs to disable unipro timeout values
564          * before power mode change
565          */
566         UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13,
567
568         /*
569          * Align DMA SG entries on a 4 KiB boundary.
570          */
571         UFSHCD_QUIRK_4KB_DMA_ALIGNMENT                  = 1 << 14,
572
573         /*
574          * This quirk needs to be enabled if the host controller does not
575          * support UIC command
576          */
577         UFSHCD_QUIRK_BROKEN_UIC_CMD                     = 1 << 15,
578
579         /*
580          * This quirk needs to be enabled if the host controller cannot
581          * support physical host configuration.
582          */
583         UFSHCD_QUIRK_SKIP_PH_CONFIGURATION              = 1 << 16,
584
585         /*
586          * This quirk needs to be enabled if the host controller has
587          * 64-bit addressing supported capability but it doesn't work.
588          */
589         UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS               = 1 << 17,
590
591         /*
592          * This quirk needs to be enabled if the host controller has
593          * auto-hibernate capability but it's FASTAUTO only.
594          */
595         UFSHCD_QUIRK_HIBERN_FASTAUTO                    = 1 << 18,
596 };
597
598 enum ufshcd_caps {
599         /* Allow dynamic clk gating */
600         UFSHCD_CAP_CLK_GATING                           = 1 << 0,
601
602         /* Allow hiberb8 with clk gating */
603         UFSHCD_CAP_HIBERN8_WITH_CLK_GATING              = 1 << 1,
604
605         /* Allow dynamic clk scaling */
606         UFSHCD_CAP_CLK_SCALING                          = 1 << 2,
607
608         /* Allow auto bkops to enabled during runtime suspend */
609         UFSHCD_CAP_AUTO_BKOPS_SUSPEND                   = 1 << 3,
610
611         /*
612          * This capability allows host controller driver to use the UFS HCI's
613          * interrupt aggregation capability.
614          * CAUTION: Enabling this might reduce overall UFS throughput.
615          */
616         UFSHCD_CAP_INTR_AGGR                            = 1 << 4,
617
618         /*
619          * This capability allows the device auto-bkops to be always enabled
620          * except during suspend (both runtime and suspend).
621          * Enabling this capability means that device will always be allowed
622          * to do background operation when it's active but it might degrade
623          * the performance of ongoing read/write operations.
624          */
625         UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5,
626
627         /*
628          * This capability allows host controller driver to automatically
629          * enable runtime power management by itself instead of waiting
630          * for userspace to control the power management.
631          */
632         UFSHCD_CAP_RPM_AUTOSUSPEND                      = 1 << 6,
633
634         /*
635          * This capability allows the host controller driver to turn-on
636          * WriteBooster, if the underlying device supports it and is
637          * provisioned to be used. This would increase the write performance.
638          */
639         UFSHCD_CAP_WB_EN                                = 1 << 7,
640
641         /*
642          * This capability allows the host controller driver to use the
643          * inline crypto engine, if it is present
644          */
645         UFSHCD_CAP_CRYPTO                               = 1 << 8,
646
647         /*
648          * This capability allows the controller regulators to be put into
649          * lpm mode aggressively during clock gating.
650          * This would increase power savings.
651          */
652         UFSHCD_CAP_AGGR_POWER_COLLAPSE                  = 1 << 9,
653
654         /*
655          * This capability allows the host controller driver to use DeepSleep,
656          * if it is supported by the UFS device. The host controller driver must
657          * support device hardware reset via the hba->device_reset() callback,
658          * in order to exit DeepSleep state.
659          */
660         UFSHCD_CAP_DEEPSLEEP                            = 1 << 10,
661
662         /*
663          * This capability allows the host controller driver to use temperature
664          * notification if it is supported by the UFS device.
665          */
666         UFSHCD_CAP_TEMP_NOTIF                           = 1 << 11,
667
668         /*
669          * Enable WriteBooster when scaling up the clock and disable
670          * WriteBooster when scaling the clock down.
671          */
672         UFSHCD_CAP_WB_WITH_CLK_SCALING                  = 1 << 12,
673 };
674
675 struct ufs_hba_variant_params {
676         struct devfreq_dev_profile devfreq_profile;
677         struct devfreq_simple_ondemand_data ondemand_data;
678         u16 hba_enable_delay_us;
679         u32 wb_flush_threshold;
680 };
681
682 #ifdef CONFIG_SCSI_UFS_HPB
683 /**
684  * struct ufshpb_dev_info - UFSHPB device related info
685  * @num_lu: the number of user logical unit to check whether all lu finished
686  *          initialization
687  * @rgn_size: device reported HPB region size
688  * @srgn_size: device reported HPB sub-region size
689  * @slave_conf_cnt: counter to check all lu finished initialization
690  * @hpb_disabled: flag to check if HPB is disabled
691  * @max_hpb_single_cmd: device reported bMAX_DATA_SIZE_FOR_SINGLE_CMD value
692  * @is_legacy: flag to check HPB 1.0
693  * @control_mode: either host or device
694  */
695 struct ufshpb_dev_info {
696         int num_lu;
697         int rgn_size;
698         int srgn_size;
699         atomic_t slave_conf_cnt;
700         bool hpb_disabled;
701         u8 max_hpb_single_cmd;
702         bool is_legacy;
703         u8 control_mode;
704 };
705 #endif
706
707 struct ufs_hba_monitor {
708         unsigned long chunk_size;
709
710         unsigned long nr_sec_rw[2];
711         ktime_t total_busy[2];
712
713         unsigned long nr_req[2];
714         /* latencies*/
715         ktime_t lat_sum[2];
716         ktime_t lat_max[2];
717         ktime_t lat_min[2];
718
719         u32 nr_queued[2];
720         ktime_t busy_start_ts[2];
721
722         ktime_t enabled_ts;
723         bool enabled;
724 };
725
726 /**
727  * struct ufs_hba - per adapter private structure
728  * @mmio_base: UFSHCI base register address
729  * @ucdl_base_addr: UFS Command Descriptor base address
730  * @utrdl_base_addr: UTP Transfer Request Descriptor base address
731  * @utmrdl_base_addr: UTP Task Management Descriptor base address
732  * @ucdl_dma_addr: UFS Command Descriptor DMA address
733  * @utrdl_dma_addr: UTRDL DMA address
734  * @utmrdl_dma_addr: UTMRDL DMA address
735  * @host: Scsi_Host instance of the driver
736  * @dev: device handle
737  * @ufs_device_wlun: WLUN that controls the entire UFS device.
738  * @hwmon_device: device instance registered with the hwmon core.
739  * @curr_dev_pwr_mode: active UFS device power mode.
740  * @uic_link_state: active state of the link to the UFS device.
741  * @rpm_lvl: desired UFS power management level during runtime PM.
742  * @spm_lvl: desired UFS power management level during system PM.
743  * @pm_op_in_progress: whether or not a PM operation is in progress.
744  * @ahit: value of Auto-Hibernate Idle Timer register.
745  * @lrb: local reference block
746  * @outstanding_tasks: Bits representing outstanding task requests
747  * @outstanding_lock: Protects @outstanding_reqs.
748  * @outstanding_reqs: Bits representing outstanding transfer requests
749  * @capabilities: UFS Controller Capabilities
750  * @nutrs: Transfer Request Queue depth supported by controller
751  * @nutmrs: Task Management Queue depth supported by controller
752  * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock.
753  * @ufs_version: UFS Version to which controller complies
754  * @vops: pointer to variant specific operations
755  * @vps: pointer to variant specific parameters
756  * @priv: pointer to variant specific private data
757  * @irq: Irq number of the controller
758  * @is_irq_enabled: whether or not the UFS controller interrupt is enabled.
759  * @dev_ref_clk_freq: reference clock frequency
760  * @quirks: bitmask with information about deviations from the UFSHCI standard.
761  * @dev_quirks: bitmask with information about deviations from the UFS standard.
762  * @tmf_tag_set: TMF tag set.
763  * @tmf_queue: Used to allocate TMF tags.
764  * @tmf_rqs: array with pointers to TMF requests while these are in progress.
765  * @active_uic_cmd: handle of active UIC command
766  * @uic_cmd_mutex: mutex for UIC command
767  * @uic_async_done: completion used during UIC processing
768  * @ufshcd_state: UFSHCD state
769  * @eh_flags: Error handling flags
770  * @intr_mask: Interrupt Mask Bits
771  * @ee_ctrl_mask: Exception event control mask
772  * @ee_drv_mask: Exception event mask for driver
773  * @ee_usr_mask: Exception event mask for user (set via debugfs)
774  * @ee_ctrl_mutex: Used to serialize exception event information.
775  * @is_powered: flag to check if HBA is powered
776  * @shutting_down: flag to check if shutdown has been invoked
777  * @host_sem: semaphore used to serialize concurrent contexts
778  * @eh_wq: Workqueue that eh_work works on
779  * @eh_work: Worker to handle UFS errors that require s/w attention
780  * @eeh_work: Worker to handle exception events
781  * @errors: HBA errors
782  * @uic_error: UFS interconnect layer error status
783  * @saved_err: sticky error mask
784  * @saved_uic_err: sticky UIC error mask
785  * @ufs_stats: various error counters
786  * @force_reset: flag to force eh_work perform a full reset
787  * @force_pmc: flag to force a power mode change
788  * @silence_err_logs: flag to silence error logs
789  * @dev_cmd: ufs device management command information
790  * @last_dme_cmd_tstamp: time stamp of the last completed DME command
791  * @nop_out_timeout: NOP OUT timeout value
792  * @dev_info: information about the UFS device
793  * @auto_bkops_enabled: to track whether bkops is enabled in device
794  * @vreg_info: UFS device voltage regulator information
795  * @clk_list_head: UFS host controller clocks list node head
796  * @req_abort_count: number of times ufshcd_abort() has been called
797  * @lanes_per_direction: number of lanes per data direction between the UFS
798  *      controller and the UFS device.
799  * @pwr_info: holds current power mode
800  * @max_pwr_info: keeps the device max valid pwm
801  * @clk_gating: information related to clock gating
802  * @caps: bitmask with information about UFS controller capabilities
803  * @devfreq: frequency scaling information owned by the devfreq core
804  * @clk_scaling: frequency scaling information owned by the UFS driver
805  * @is_sys_suspended: whether or not the entire system has been suspended
806  * @urgent_bkops_lvl: keeps track of urgent bkops level for device
807  * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for
808  *  device is known or not.
809  * @wb_mutex: used to serialize devfreq and sysfs write booster toggling
810  * @clk_scaling_lock: used to serialize device commands and clock scaling
811  * @desc_size: descriptor sizes reported by device
812  * @scsi_block_reqs_cnt: reference counting for scsi block requests
813  * @bsg_dev: struct device associated with the BSG queue
814  * @bsg_queue: BSG queue associated with the UFS controller
815  * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power
816  *      management) after the UFS device has finished a WriteBooster buffer
817  *      flush or auto BKOP.
818  * @ufshpb_dev: information related to HPB (Host Performance Booster).
819  * @monitor: statistics about UFS commands
820  * @crypto_capabilities: Content of crypto capabilities register (0x100)
821  * @crypto_cap_array: Array of crypto capabilities
822  * @crypto_cfg_register: Start of the crypto cfg array
823  * @crypto_profile: the crypto profile of this hba (if applicable)
824  * @debugfs_root: UFS controller debugfs root directory
825  * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay
826  * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore
827  *      ee_ctrl_mask
828  * @luns_avail: number of regular and well known LUNs supported by the UFS
829  *      device
830  * @complete_put: whether or not to call ufshcd_rpm_put() from inside
831  *      ufshcd_resume_complete()
832  */
833 struct ufs_hba {
834         void __iomem *mmio_base;
835
836         /* Virtual memory reference */
837         struct utp_transfer_cmd_desc *ucdl_base_addr;
838         struct utp_transfer_req_desc *utrdl_base_addr;
839         struct utp_task_req_desc *utmrdl_base_addr;
840
841         /* DMA memory reference */
842         dma_addr_t ucdl_dma_addr;
843         dma_addr_t utrdl_dma_addr;
844         dma_addr_t utmrdl_dma_addr;
845
846         struct Scsi_Host *host;
847         struct device *dev;
848         struct scsi_device *ufs_device_wlun;
849
850 #ifdef CONFIG_SCSI_UFS_HWMON
851         struct device *hwmon_device;
852 #endif
853
854         enum ufs_dev_pwr_mode curr_dev_pwr_mode;
855         enum uic_link_state uic_link_state;
856         /* Desired UFS power management level during runtime PM */
857         enum ufs_pm_level rpm_lvl;
858         /* Desired UFS power management level during system PM */
859         enum ufs_pm_level spm_lvl;
860         int pm_op_in_progress;
861
862         /* Auto-Hibernate Idle Timer register value */
863         u32 ahit;
864
865         struct ufshcd_lrb *lrb;
866
867         unsigned long outstanding_tasks;
868         spinlock_t outstanding_lock;
869         unsigned long outstanding_reqs;
870
871         u32 capabilities;
872         int nutrs;
873         int nutmrs;
874         u32 reserved_slot;
875         u32 ufs_version;
876         const struct ufs_hba_variant_ops *vops;
877         struct ufs_hba_variant_params *vps;
878         void *priv;
879         unsigned int irq;
880         bool is_irq_enabled;
881         enum ufs_ref_clk_freq dev_ref_clk_freq;
882
883         unsigned int quirks;    /* Deviations from standard UFSHCI spec. */
884
885         /* Device deviations from standard UFS device spec. */
886         unsigned int dev_quirks;
887
888         struct blk_mq_tag_set tmf_tag_set;
889         struct request_queue *tmf_queue;
890         struct request **tmf_rqs;
891
892         struct uic_command *active_uic_cmd;
893         struct mutex uic_cmd_mutex;
894         struct completion *uic_async_done;
895
896         enum ufshcd_state ufshcd_state;
897         u32 eh_flags;
898         u32 intr_mask;
899         u16 ee_ctrl_mask;
900         u16 ee_drv_mask;
901         u16 ee_usr_mask;
902         struct mutex ee_ctrl_mutex;
903         bool is_powered;
904         bool shutting_down;
905         struct semaphore host_sem;
906
907         /* Work Queues */
908         struct workqueue_struct *eh_wq;
909         struct work_struct eh_work;
910         struct work_struct eeh_work;
911
912         /* HBA Errors */
913         u32 errors;
914         u32 uic_error;
915         u32 saved_err;
916         u32 saved_uic_err;
917         struct ufs_stats ufs_stats;
918         bool force_reset;
919         bool force_pmc;
920         bool silence_err_logs;
921
922         /* Device management request data */
923         struct ufs_dev_cmd dev_cmd;
924         ktime_t last_dme_cmd_tstamp;
925         int nop_out_timeout;
926
927         /* Keeps information of the UFS device connected to this host */
928         struct ufs_dev_info dev_info;
929         bool auto_bkops_enabled;
930         struct ufs_vreg_info vreg_info;
931         struct list_head clk_list_head;
932
933         /* Number of requests aborts */
934         int req_abort_count;
935
936         /* Number of lanes available (1 or 2) for Rx/Tx */
937         u32 lanes_per_direction;
938         struct ufs_pa_layer_attr pwr_info;
939         struct ufs_pwr_mode_info max_pwr_info;
940
941         struct ufs_clk_gating clk_gating;
942         /* Control to enable/disable host capabilities */
943         u32 caps;
944
945         struct devfreq *devfreq;
946         struct ufs_clk_scaling clk_scaling;
947         bool is_sys_suspended;
948
949         enum bkops_status urgent_bkops_lvl;
950         bool is_urgent_bkops_lvl_checked;
951
952         struct mutex wb_mutex;
953         struct rw_semaphore clk_scaling_lock;
954         unsigned char desc_size[QUERY_DESC_IDN_MAX];
955         atomic_t scsi_block_reqs_cnt;
956
957         struct device           bsg_dev;
958         struct request_queue    *bsg_queue;
959         struct delayed_work rpm_dev_flush_recheck_work;
960
961 #ifdef CONFIG_SCSI_UFS_HPB
962         struct ufshpb_dev_info ufshpb_dev;
963 #endif
964
965         struct ufs_hba_monitor  monitor;
966
967 #ifdef CONFIG_SCSI_UFS_CRYPTO
968         union ufs_crypto_capabilities crypto_capabilities;
969         union ufs_crypto_cap_entry *crypto_cap_array;
970         u32 crypto_cfg_register;
971         struct blk_crypto_profile crypto_profile;
972 #endif
973 #ifdef CONFIG_DEBUG_FS
974         struct dentry *debugfs_root;
975         struct delayed_work debugfs_ee_work;
976         u32 debugfs_ee_rate_limit_ms;
977 #endif
978         u32 luns_avail;
979         bool complete_put;
980 };
981
982 /* Returns true if clocks can be gated. Otherwise false */
983 static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba)
984 {
985         return hba->caps & UFSHCD_CAP_CLK_GATING;
986 }
987 static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba)
988 {
989         return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
990 }
991 static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba)
992 {
993         return hba->caps & UFSHCD_CAP_CLK_SCALING;
994 }
995 static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
996 {
997         return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
998 }
999 static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba)
1000 {
1001         return hba->caps & UFSHCD_CAP_RPM_AUTOSUSPEND;
1002 }
1003
1004 static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba)
1005 {
1006         return (hba->caps & UFSHCD_CAP_INTR_AGGR) &&
1007                 !(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR);
1008 }
1009
1010 static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba)
1011 {
1012         return !!(ufshcd_is_link_hibern8(hba) &&
1013                   (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE));
1014 }
1015
1016 static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba)
1017 {
1018         return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) &&
1019                 !(hba->quirks & UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8);
1020 }
1021
1022 static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba)
1023 {
1024         return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit);
1025 }
1026
1027 static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba)
1028 {
1029         return hba->caps & UFSHCD_CAP_WB_EN;
1030 }
1031
1032 static inline bool ufshcd_enable_wb_if_scaling_up(struct ufs_hba *hba)
1033 {
1034         return hba->caps & UFSHCD_CAP_WB_WITH_CLK_SCALING;
1035 }
1036
1037 #define ufshcd_writel(hba, val, reg)    \
1038         writel((val), (hba)->mmio_base + (reg))
1039 #define ufshcd_readl(hba, reg)  \
1040         readl((hba)->mmio_base + (reg))
1041
1042 /**
1043  * ufshcd_rmwl - perform read/modify/write for a controller register
1044  * @hba: per adapter instance
1045  * @mask: mask to apply on read value
1046  * @val: actual value to write
1047  * @reg: register address
1048  */
1049 static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
1050 {
1051         u32 tmp;
1052
1053         tmp = ufshcd_readl(hba, reg);
1054         tmp &= ~mask;
1055         tmp |= (val & mask);
1056         ufshcd_writel(hba, tmp, reg);
1057 }
1058
1059 int ufshcd_alloc_host(struct device *, struct ufs_hba **);
1060 void ufshcd_dealloc_host(struct ufs_hba *);
1061 int ufshcd_hba_enable(struct ufs_hba *hba);
1062 int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int);
1063 int ufshcd_link_recovery(struct ufs_hba *hba);
1064 int ufshcd_make_hba_operational(struct ufs_hba *hba);
1065 void ufshcd_remove(struct ufs_hba *);
1066 int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
1067 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
1068 void ufshcd_delay_us(unsigned long us, unsigned long tolerance);
1069 void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk);
1070 void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val);
1071 void ufshcd_hba_stop(struct ufs_hba *hba);
1072 void ufshcd_schedule_eh_work(struct ufs_hba *hba);
1073
1074 static inline void check_upiu_size(void)
1075 {
1076         BUILD_BUG_ON(ALIGNED_UPIU_SIZE <
1077                 GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE);
1078 }
1079
1080 /**
1081  * ufshcd_set_variant - set variant specific data to the hba
1082  * @hba: per adapter instance
1083  * @variant: pointer to variant specific data
1084  */
1085 static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant)
1086 {
1087         BUG_ON(!hba);
1088         hba->priv = variant;
1089 }
1090
1091 /**
1092  * ufshcd_get_variant - get variant specific data from the hba
1093  * @hba: per adapter instance
1094  */
1095 static inline void *ufshcd_get_variant(struct ufs_hba *hba)
1096 {
1097         BUG_ON(!hba);
1098         return hba->priv;
1099 }
1100
1101 #ifdef CONFIG_PM
1102 extern int ufshcd_runtime_suspend(struct device *dev);
1103 extern int ufshcd_runtime_resume(struct device *dev);
1104 #endif
1105 #ifdef CONFIG_PM_SLEEP
1106 extern int ufshcd_system_suspend(struct device *dev);
1107 extern int ufshcd_system_resume(struct device *dev);
1108 #endif
1109 extern int ufshcd_shutdown(struct ufs_hba *hba);
1110 extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba,
1111                                       int agreed_gear,
1112                                       int adapt_val);
1113 extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
1114                                u8 attr_set, u32 mib_val, u8 peer);
1115 extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
1116                                u32 *mib_val, u8 peer);
1117 extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
1118                         struct ufs_pa_layer_attr *desired_pwr_mode);
1119 extern int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode);
1120
1121 /* UIC command interfaces for DME primitives */
1122 #define DME_LOCAL       0
1123 #define DME_PEER        1
1124 #define ATTR_SET_NOR    0       /* NORMAL */
1125 #define ATTR_SET_ST     1       /* STATIC */
1126
1127 static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
1128                                  u32 mib_val)
1129 {
1130         return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
1131                                    mib_val, DME_LOCAL);
1132 }
1133
1134 static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel,
1135                                     u32 mib_val)
1136 {
1137         return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
1138                                    mib_val, DME_LOCAL);
1139 }
1140
1141 static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
1142                                       u32 mib_val)
1143 {
1144         return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
1145                                    mib_val, DME_PEER);
1146 }
1147
1148 static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel,
1149                                          u32 mib_val)
1150 {
1151         return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
1152                                    mib_val, DME_PEER);
1153 }
1154
1155 static inline int ufshcd_dme_get(struct ufs_hba *hba,
1156                                  u32 attr_sel, u32 *mib_val)
1157 {
1158         return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
1159 }
1160
1161 static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
1162                                       u32 attr_sel, u32 *mib_val)
1163 {
1164         return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
1165 }
1166
1167 static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info)
1168 {
1169         return (pwr_info->pwr_rx == FAST_MODE ||
1170                 pwr_info->pwr_rx == FASTAUTO_MODE) &&
1171                 (pwr_info->pwr_tx == FAST_MODE ||
1172                 pwr_info->pwr_tx == FASTAUTO_MODE);
1173 }
1174
1175 static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba)
1176 {
1177         return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
1178 }
1179
1180 void ufshcd_auto_hibern8_enable(struct ufs_hba *hba);
1181 void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit);
1182 void ufshcd_fixup_dev_quirks(struct ufs_hba *hba,
1183                              const struct ufs_dev_quirk *fixups);
1184 #define SD_ASCII_STD true
1185 #define SD_RAW false
1186 int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index,
1187                             u8 **buf, bool ascii);
1188
1189 int ufshcd_hold(struct ufs_hba *hba, bool async);
1190 void ufshcd_release(struct ufs_hba *hba);
1191
1192 void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value);
1193
1194 void ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
1195                                   int *desc_length);
1196
1197 u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba);
1198
1199 int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg);
1200
1201 int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd);
1202
1203 int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
1204                              struct utp_upiu_req *req_upiu,
1205                              struct utp_upiu_req *rsp_upiu,
1206                              int msgcode,
1207                              u8 *desc_buff, int *buff_len,
1208                              enum query_opcode desc_op);
1209
1210 int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable);
1211 int ufshcd_wb_toggle_buf_flush(struct ufs_hba *hba, bool enable);
1212 int ufshcd_suspend_prepare(struct device *dev);
1213 int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm);
1214 void ufshcd_resume_complete(struct device *dev);
1215
1216 /* Wrapper functions for safely calling variant operations */
1217 static inline int ufshcd_vops_init(struct ufs_hba *hba)
1218 {
1219         if (hba->vops && hba->vops->init)
1220                 return hba->vops->init(hba);
1221
1222         return 0;
1223 }
1224
1225 static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba)
1226 {
1227         if (hba->vops && hba->vops->phy_initialization)
1228                 return hba->vops->phy_initialization(hba);
1229
1230         return 0;
1231 }
1232
1233 extern const struct ufs_pm_lvl_states ufs_pm_lvl_states[];
1234
1235 int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len,
1236                      const char *prefix);
1237
1238 int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask);
1239 int ufshcd_write_ee_control(struct ufs_hba *hba);
1240 int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask,
1241                              const u16 *other_mask, u16 set, u16 clr);
1242
1243 #endif /* End of Header */