1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
3 * lirc.h - linux infrared remote control header file
9 #include <linux/types.h>
10 #include <linux/ioctl.h>
12 #define PULSE_BIT 0x01000000
13 #define PULSE_MASK 0x00FFFFFF
15 #define LIRC_MODE2_SPACE 0x00000000
16 #define LIRC_MODE2_PULSE 0x01000000
17 #define LIRC_MODE2_FREQUENCY 0x02000000
18 #define LIRC_MODE2_TIMEOUT 0x03000000
20 #define LIRC_VALUE_MASK 0x00FFFFFF
21 #define LIRC_MODE2_MASK 0xFF000000
23 #define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
24 #define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
25 #define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
26 #define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
28 #define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
29 #define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
31 #define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE)
32 #define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
33 #define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
34 #define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
36 /* used heavily by lirc userspace */
39 /*** lirc compatible hardware features ***/
41 #define LIRC_MODE2SEND(x) (x)
42 #define LIRC_SEND2MODE(x) (x)
43 #define LIRC_MODE2REC(x) ((x) << 16)
44 #define LIRC_REC2MODE(x) ((x) >> 16)
46 #define LIRC_MODE_RAW 0x00000001
47 #define LIRC_MODE_PULSE 0x00000002
48 #define LIRC_MODE_MODE2 0x00000004
49 #define LIRC_MODE_SCANCODE 0x00000008
50 #define LIRC_MODE_LIRCCODE 0x00000010
53 #define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW)
54 #define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE)
55 #define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2)
56 #define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE)
58 #define LIRC_CAN_SEND_MASK 0x0000003f
60 #define LIRC_CAN_SET_SEND_CARRIER 0x00000100
61 #define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200
62 #define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400
64 #define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW)
65 #define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE)
66 #define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2)
67 #define LIRC_CAN_REC_SCANCODE LIRC_MODE2REC(LIRC_MODE_SCANCODE)
68 #define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE)
70 #define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
72 #define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16)
73 #define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16)
75 #define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
76 #define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000
77 #define LIRC_CAN_GET_REC_RESOLUTION 0x20000000
78 #define LIRC_CAN_SET_REC_TIMEOUT 0x10000000
79 #define LIRC_CAN_SET_REC_FILTER 0x08000000
81 #define LIRC_CAN_MEASURE_CARRIER 0x02000000
82 #define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000
84 #define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
85 #define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
87 #define LIRC_CAN_NOTIFY_DECODE 0x01000000
89 /*** IOCTL commands for lirc driver ***/
91 #define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32)
93 #define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32)
94 #define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32)
95 #define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32)
97 #define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32)
98 #define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32)
100 /* code length in bits, currently only for LIRC_MODE_LIRCCODE */
101 #define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32)
103 #define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32)
104 #define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32)
105 /* Note: these can reset the according pulse_width */
106 #define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32)
107 #define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32)
108 #define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32)
109 #define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32)
112 * when a timeout != 0 is set the driver will send a
113 * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is
114 * never sent, timeout is disabled by default
116 #define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32)
118 /* 1 enables, 0 disables timeout reports in MODE2 */
119 #define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32)
122 * if enabled from the next key press on the driver will send
123 * LIRC_MODE2_FREQUENCY packets
125 #define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
128 * to set a range use LIRC_SET_REC_CARRIER_RANGE with the
129 * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound
131 #define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32)
133 #define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32)
136 * Return the recording timeout, which is either set by
137 * the ioctl LIRC_SET_REC_TIMEOUT or by the kernel after setting the protocols.
139 #define LIRC_GET_REC_TIMEOUT _IOR('i', 0x00000024, __u32)
142 * struct lirc_scancode - decoded scancode with protocol for use with
145 * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR
147 * @flags: should be 0 for transmit. When receiving scancodes,
148 * LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set
149 * depending on the protocol
150 * @rc_proto: see enum rc_proto
151 * @keycode: the translated keycode. Set to 0 for transmit.
152 * @scancode: the scancode received or to be sent
154 struct lirc_scancode {
162 /* Set if the toggle bit of rc-5 or rc-6 is enabled */
163 #define LIRC_SCANCODE_FLAG_TOGGLE 1
164 /* Set if this is a nec or sanyo repeat */
165 #define LIRC_SCANCODE_FLAG_REPEAT 2
168 * enum rc_proto - the Remote Controller protocol
170 * @RC_PROTO_UNKNOWN: Protocol not known
171 * @RC_PROTO_OTHER: Protocol known but proprietary
172 * @RC_PROTO_RC5: Philips RC5 protocol
173 * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol
174 * @RC_PROTO_RC5_SZ: StreamZap variant of RC5
175 * @RC_PROTO_JVC: JVC protocol
176 * @RC_PROTO_SONY12: Sony 12 bit protocol
177 * @RC_PROTO_SONY15: Sony 15 bit protocol
178 * @RC_PROTO_SONY20: Sony 20 bit protocol
179 * @RC_PROTO_NEC: NEC protocol
180 * @RC_PROTO_NECX: Extended NEC protocol
181 * @RC_PROTO_NEC32: NEC 32 bit protocol
182 * @RC_PROTO_SANYO: Sanyo protocol
183 * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard
184 * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse
185 * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol
186 * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol
187 * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol
188 * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol
189 * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol
190 * @RC_PROTO_SHARP: Sharp protocol
191 * @RC_PROTO_XMP: XMP protocol
192 * @RC_PROTO_CEC: CEC protocol
193 * @RC_PROTO_IMON: iMon Pad protocol
194 * @RC_PROTO_RCMM12: RC-MM protocol 12 bits
195 * @RC_PROTO_RCMM24: RC-MM protocol 24 bits
196 * @RC_PROTO_RCMM32: RC-MM protocol 32 bits
197 * @RC_PROTO_XBOX_DVD: Xbox DVD Movie Playback Kit protocol
198 * @RC_PROTO_MAX: Maximum value of enum rc_proto
201 RC_PROTO_UNKNOWN = 0,
204 RC_PROTO_RC5X_20 = 3,
214 RC_PROTO_MCIR2_KBD = 13,
215 RC_PROTO_MCIR2_MSE = 14,
217 RC_PROTO_RC6_6A_20 = 16,
218 RC_PROTO_RC6_6A_24 = 17,
219 RC_PROTO_RC6_6A_32 = 18,
220 RC_PROTO_RC6_MCE = 19,
225 RC_PROTO_RCMM12 = 24,
226 RC_PROTO_RCMM24 = 25,
227 RC_PROTO_RCMM32 = 26,
228 RC_PROTO_XBOX_DVD = 27,
229 RC_PROTO_MAX = RC_PROTO_XBOX_DVD,