2 * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
3 * Andreas Heppel <aheppel@sysgo.de>
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
8 * SPDX-License-Identifier: GPL-2.0+
15 * Under PCI, each device has 256 bytes of configuration address space,
16 * of which the first 64 bytes are standardized as follows:
18 #define PCI_VENDOR_ID 0x00 /* 16 bits */
19 #define PCI_DEVICE_ID 0x02 /* 16 bits */
20 #define PCI_COMMAND 0x04 /* 16 bits */
21 #define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */
22 #define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */
23 #define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */
24 #define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */
25 #define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
26 #define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
27 #define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
28 #define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
29 #define PCI_COMMAND_SERR 0x100 /* Enable SERR */
30 #define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
32 #define PCI_STATUS 0x06 /* 16 bits */
33 #define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
34 #define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
35 #define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
36 #define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
37 #define PCI_STATUS_PARITY 0x100 /* Detected parity error */
38 #define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */
39 #define PCI_STATUS_DEVSEL_FAST 0x000
40 #define PCI_STATUS_DEVSEL_MEDIUM 0x200
41 #define PCI_STATUS_DEVSEL_SLOW 0x400
42 #define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
43 #define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
44 #define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
45 #define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
46 #define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
48 #define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8
50 #define PCI_REVISION_ID 0x08 /* Revision ID */
51 #define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */
52 #define PCI_CLASS_DEVICE 0x0a /* Device class */
53 #define PCI_CLASS_CODE 0x0b /* Device class code */
54 #define PCI_CLASS_CODE_TOO_OLD 0x00
55 #define PCI_CLASS_CODE_STORAGE 0x01
56 #define PCI_CLASS_CODE_NETWORK 0x02
57 #define PCI_CLASS_CODE_DISPLAY 0x03
58 #define PCI_CLASS_CODE_MULTIMEDIA 0x04
59 #define PCI_CLASS_CODE_MEMORY 0x05
60 #define PCI_CLASS_CODE_BRIDGE 0x06
61 #define PCI_CLASS_CODE_COMM 0x07
62 #define PCI_CLASS_CODE_PERIPHERAL 0x08
63 #define PCI_CLASS_CODE_INPUT 0x09
64 #define PCI_CLASS_CODE_DOCKING 0x0A
65 #define PCI_CLASS_CODE_PROCESSOR 0x0B
66 #define PCI_CLASS_CODE_SERIAL 0x0C
67 #define PCI_CLASS_CODE_WIRELESS 0x0D
68 #define PCI_CLASS_CODE_I2O 0x0E
69 #define PCI_CLASS_CODE_SATELLITE 0x0F
70 #define PCI_CLASS_CODE_CRYPTO 0x10
71 #define PCI_CLASS_CODE_DATA 0x11
72 /* Base Class 0x12 - 0xFE is reserved */
73 #define PCI_CLASS_CODE_OTHER 0xFF
75 #define PCI_CLASS_SUB_CODE 0x0a /* Device sub-class code */
76 #define PCI_CLASS_SUB_CODE_TOO_OLD_NOTVGA 0x00
77 #define PCI_CLASS_SUB_CODE_TOO_OLD_VGA 0x01
78 #define PCI_CLASS_SUB_CODE_STORAGE_SCSI 0x00
79 #define PCI_CLASS_SUB_CODE_STORAGE_IDE 0x01
80 #define PCI_CLASS_SUB_CODE_STORAGE_FLOPPY 0x02
81 #define PCI_CLASS_SUB_CODE_STORAGE_IPIBUS 0x03
82 #define PCI_CLASS_SUB_CODE_STORAGE_RAID 0x04
83 #define PCI_CLASS_SUB_CODE_STORAGE_ATA 0x05
84 #define PCI_CLASS_SUB_CODE_STORAGE_SATA 0x06
85 #define PCI_CLASS_SUB_CODE_STORAGE_SAS 0x07
86 #define PCI_CLASS_SUB_CODE_STORAGE_OTHER 0x80
87 #define PCI_CLASS_SUB_CODE_NETWORK_ETHERNET 0x00
88 #define PCI_CLASS_SUB_CODE_NETWORK_TOKENRING 0x01
89 #define PCI_CLASS_SUB_CODE_NETWORK_FDDI 0x02
90 #define PCI_CLASS_SUB_CODE_NETWORK_ATM 0x03
91 #define PCI_CLASS_SUB_CODE_NETWORK_ISDN 0x04
92 #define PCI_CLASS_SUB_CODE_NETWORK_WORLDFIP 0x05
93 #define PCI_CLASS_SUB_CODE_NETWORK_PICMG 0x06
94 #define PCI_CLASS_SUB_CODE_NETWORK_OTHER 0x80
95 #define PCI_CLASS_SUB_CODE_DISPLAY_VGA 0x00
96 #define PCI_CLASS_SUB_CODE_DISPLAY_XGA 0x01
97 #define PCI_CLASS_SUB_CODE_DISPLAY_3D 0x02
98 #define PCI_CLASS_SUB_CODE_DISPLAY_OTHER 0x80
99 #define PCI_CLASS_SUB_CODE_MULTIMEDIA_VIDEO 0x00
100 #define PCI_CLASS_SUB_CODE_MULTIMEDIA_AUDIO 0x01
101 #define PCI_CLASS_SUB_CODE_MULTIMEDIA_PHONE 0x02
102 #define PCI_CLASS_SUB_CODE_MULTIMEDIA_OTHER 0x80
103 #define PCI_CLASS_SUB_CODE_MEMORY_RAM 0x00
104 #define PCI_CLASS_SUB_CODE_MEMORY_FLASH 0x01
105 #define PCI_CLASS_SUB_CODE_MEMORY_OTHER 0x80
106 #define PCI_CLASS_SUB_CODE_BRIDGE_HOST 0x00
107 #define PCI_CLASS_SUB_CODE_BRIDGE_ISA 0x01
108 #define PCI_CLASS_SUB_CODE_BRIDGE_EISA 0x02
109 #define PCI_CLASS_SUB_CODE_BRIDGE_MCA 0x03
110 #define PCI_CLASS_SUB_CODE_BRIDGE_PCI 0x04
111 #define PCI_CLASS_SUB_CODE_BRIDGE_PCMCIA 0x05
112 #define PCI_CLASS_SUB_CODE_BRIDGE_NUBUS 0x06
113 #define PCI_CLASS_SUB_CODE_BRIDGE_CARDBUS 0x07
114 #define PCI_CLASS_SUB_CODE_BRIDGE_RACEWAY 0x08
115 #define PCI_CLASS_SUB_CODE_BRIDGE_SEMI_PCI 0x09
116 #define PCI_CLASS_SUB_CODE_BRIDGE_INFINIBAND 0x0A
117 #define PCI_CLASS_SUB_CODE_BRIDGE_OTHER 0x80
118 #define PCI_CLASS_SUB_CODE_COMM_SERIAL 0x00
119 #define PCI_CLASS_SUB_CODE_COMM_PARALLEL 0x01
120 #define PCI_CLASS_SUB_CODE_COMM_MULTIPORT 0x02
121 #define PCI_CLASS_SUB_CODE_COMM_MODEM 0x03
122 #define PCI_CLASS_SUB_CODE_COMM_GPIB 0x04
123 #define PCI_CLASS_SUB_CODE_COMM_SMARTCARD 0x05
124 #define PCI_CLASS_SUB_CODE_COMM_OTHER 0x80
125 #define PCI_CLASS_SUB_CODE_PERIPHERAL_PIC 0x00
126 #define PCI_CLASS_SUB_CODE_PERIPHERAL_DMA 0x01
127 #define PCI_CLASS_SUB_CODE_PERIPHERAL_TIMER 0x02
128 #define PCI_CLASS_SUB_CODE_PERIPHERAL_RTC 0x03
129 #define PCI_CLASS_SUB_CODE_PERIPHERAL_HOTPLUG 0x04
130 #define PCI_CLASS_SUB_CODE_PERIPHERAL_SD 0x05
131 #define PCI_CLASS_SUB_CODE_PERIPHERAL_OTHER 0x80
132 #define PCI_CLASS_SUB_CODE_INPUT_KEYBOARD 0x00
133 #define PCI_CLASS_SUB_CODE_INPUT_DIGITIZER 0x01
134 #define PCI_CLASS_SUB_CODE_INPUT_MOUSE 0x02
135 #define PCI_CLASS_SUB_CODE_INPUT_SCANNER 0x03
136 #define PCI_CLASS_SUB_CODE_INPUT_GAMEPORT 0x04
137 #define PCI_CLASS_SUB_CODE_INPUT_OTHER 0x80
138 #define PCI_CLASS_SUB_CODE_DOCKING_GENERIC 0x00
139 #define PCI_CLASS_SUB_CODE_DOCKING_OTHER 0x80
140 #define PCI_CLASS_SUB_CODE_PROCESSOR_386 0x00
141 #define PCI_CLASS_SUB_CODE_PROCESSOR_486 0x01
142 #define PCI_CLASS_SUB_CODE_PROCESSOR_PENTIUM 0x02
143 #define PCI_CLASS_SUB_CODE_PROCESSOR_ALPHA 0x10
144 #define PCI_CLASS_SUB_CODE_PROCESSOR_POWERPC 0x20
145 #define PCI_CLASS_SUB_CODE_PROCESSOR_MIPS 0x30
146 #define PCI_CLASS_SUB_CODE_PROCESSOR_COPROC 0x40
147 #define PCI_CLASS_SUB_CODE_SERIAL_1394 0x00
148 #define PCI_CLASS_SUB_CODE_SERIAL_ACCESSBUS 0x01
149 #define PCI_CLASS_SUB_CODE_SERIAL_SSA 0x02
150 #define PCI_CLASS_SUB_CODE_SERIAL_USB 0x03
151 #define PCI_CLASS_SUB_CODE_SERIAL_FIBRECHAN 0x04
152 #define PCI_CLASS_SUB_CODE_SERIAL_SMBUS 0x05
153 #define PCI_CLASS_SUB_CODE_SERIAL_INFINIBAND 0x06
154 #define PCI_CLASS_SUB_CODE_SERIAL_IPMI 0x07
155 #define PCI_CLASS_SUB_CODE_SERIAL_SERCOS 0x08
156 #define PCI_CLASS_SUB_CODE_SERIAL_CANBUS 0x09
157 #define PCI_CLASS_SUB_CODE_WIRELESS_IRDA 0x00
158 #define PCI_CLASS_SUB_CODE_WIRELESS_IR 0x01
159 #define PCI_CLASS_SUB_CODE_WIRELESS_RF 0x10
160 #define PCI_CLASS_SUB_CODE_WIRELESS_BLUETOOTH 0x11
161 #define PCI_CLASS_SUB_CODE_WIRELESS_BROADBAND 0x12
162 #define PCI_CLASS_SUB_CODE_WIRELESS_80211A 0x20
163 #define PCI_CLASS_SUB_CODE_WIRELESS_80211B 0x21
164 #define PCI_CLASS_SUB_CODE_WIRELESS_OTHER 0x80
165 #define PCI_CLASS_SUB_CODE_I2O_V1_0 0x00
166 #define PCI_CLASS_SUB_CODE_SATELLITE_TV 0x01
167 #define PCI_CLASS_SUB_CODE_SATELLITE_AUDIO 0x02
168 #define PCI_CLASS_SUB_CODE_SATELLITE_VOICE 0x03
169 #define PCI_CLASS_SUB_CODE_SATELLITE_DATA 0x04
170 #define PCI_CLASS_SUB_CODE_CRYPTO_NETWORK 0x00
171 #define PCI_CLASS_SUB_CODE_CRYPTO_ENTERTAINMENT 0x10
172 #define PCI_CLASS_SUB_CODE_CRYPTO_OTHER 0x80
173 #define PCI_CLASS_SUB_CODE_DATA_DPIO 0x00
174 #define PCI_CLASS_SUB_CODE_DATA_PERFCNTR 0x01
175 #define PCI_CLASS_SUB_CODE_DATA_COMMSYNC 0x10
176 #define PCI_CLASS_SUB_CODE_DATA_MGMT 0x20
177 #define PCI_CLASS_SUB_CODE_DATA_OTHER 0x80
179 #define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */
180 #define PCI_LATENCY_TIMER 0x0d /* 8 bits */
181 #define PCI_HEADER_TYPE 0x0e /* 8 bits */
182 #define PCI_HEADER_TYPE_NORMAL 0
183 #define PCI_HEADER_TYPE_BRIDGE 1
184 #define PCI_HEADER_TYPE_CARDBUS 2
186 #define PCI_BIST 0x0f /* 8 bits */
187 #define PCI_BIST_CODE_MASK 0x0f /* Return result */
188 #define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */
189 #define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */
192 * Base addresses specify locations in memory or I/O space.
193 * Decoded size can be determined by writing a value of
194 * 0xffffffff to the register, and reading it back. Only
195 * 1 bits are decoded.
197 #define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */
198 #define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */
199 #define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */
200 #define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */
201 #define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */
202 #define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */
203 #define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */
204 #define PCI_BASE_ADDRESS_SPACE_IO 0x01
205 #define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
206 #define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
207 #define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */
208 #define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */
209 #define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */
210 #define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */
211 #define PCI_BASE_ADDRESS_MEM_MASK (~0x0fULL)
212 #define PCI_BASE_ADDRESS_IO_MASK (~0x03ULL)
213 /* bit 1 is reserved if address_space = 1 */
215 /* Header type 0 (normal devices) */
216 #define PCI_CARDBUS_CIS 0x28
217 #define PCI_SUBSYSTEM_VENDOR_ID 0x2c
218 #define PCI_SUBSYSTEM_ID 0x2e
219 #define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */
220 #define PCI_ROM_ADDRESS_ENABLE 0x01
221 #define PCI_ROM_ADDRESS_MASK (~0x7ffULL)
223 #define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
225 /* 0x35-0x3b are reserved */
226 #define PCI_INTERRUPT_LINE 0x3c /* 8 bits */
227 #define PCI_INTERRUPT_PIN 0x3d /* 8 bits */
228 #define PCI_MIN_GNT 0x3e /* 8 bits */
229 #define PCI_MAX_LAT 0x3f /* 8 bits */
231 /* Header type 1 (PCI-to-PCI bridges) */
232 #define PCI_PRIMARY_BUS 0x18 /* Primary bus number */
233 #define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */
234 #define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */
235 #define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */
236 #define PCI_IO_BASE 0x1c /* I/O range behind the bridge */
237 #define PCI_IO_LIMIT 0x1d
238 #define PCI_IO_RANGE_TYPE_MASK 0x0f /* I/O bridging type */
239 #define PCI_IO_RANGE_TYPE_16 0x00
240 #define PCI_IO_RANGE_TYPE_32 0x01
241 #define PCI_IO_RANGE_MASK ~0x0f
242 #define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */
243 #define PCI_MEMORY_BASE 0x20 /* Memory range behind */
244 #define PCI_MEMORY_LIMIT 0x22
245 #define PCI_MEMORY_RANGE_TYPE_MASK 0x0f
246 #define PCI_MEMORY_RANGE_MASK ~0x0f
247 #define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */
248 #define PCI_PREF_MEMORY_LIMIT 0x26
249 #define PCI_PREF_RANGE_TYPE_MASK 0x0f
250 #define PCI_PREF_RANGE_TYPE_32 0x00
251 #define PCI_PREF_RANGE_TYPE_64 0x01
252 #define PCI_PREF_RANGE_MASK ~0x0f
253 #define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */
254 #define PCI_PREF_LIMIT_UPPER32 0x2c
255 #define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */
256 #define PCI_IO_LIMIT_UPPER16 0x32
257 /* 0x34 same as for htype 0 */
258 /* 0x35-0x3b is reserved */
259 #define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */
260 /* 0x3c-0x3d are same as for htype 0 */
261 #define PCI_BRIDGE_CONTROL 0x3e
262 #define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */
263 #define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */
264 #define PCI_BRIDGE_CTL_NO_ISA 0x04 /* Disable bridging of ISA ports */
265 #define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */
266 #define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */
267 #define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */
268 #define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */
271 #define PCI_ERREN 0x48 /* Error Enable */
272 #define PCI_ERRSTS 0x49 /* Error Status */
273 #define PCI_BRDGOPT1 0x4A /* PCI Bridge Options 1 */
274 #define PCI_PLBSESR0 0x4C /* PCI PLB Slave Error Syndrome 0 */
275 #define PCI_PLBSESR1 0x50 /* PCI PLB Slave Error Syndrome 1 */
276 #define PCI_PLBSEAR 0x54 /* PCI PLB Slave Error Address */
277 #define PCI_CAPID 0x58 /* Capability Identifier */
278 #define PCI_NEXTITEMPTR 0x59 /* Next Item Pointer */
279 #define PCI_PMC 0x5A /* Power Management Capabilities */
280 #define PCI_PMCSR 0x5C /* Power Management Control Status */
281 #define PCI_PMCSRBSE 0x5E /* PMCSR PCI to PCI Bridge Support Extensions */
282 #define PCI_BRDGOPT2 0x60 /* PCI Bridge Options 2 */
283 #define PCI_PMSCRR 0x64 /* Power Management State Change Request Re. */
285 /* Header type 2 (CardBus bridges) */
286 #define PCI_CB_CAPABILITY_LIST 0x14
288 #define PCI_CB_SEC_STATUS 0x16 /* Secondary status */
289 #define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */
290 #define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */
291 #define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */
292 #define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */
293 #define PCI_CB_MEMORY_BASE_0 0x1c
294 #define PCI_CB_MEMORY_LIMIT_0 0x20
295 #define PCI_CB_MEMORY_BASE_1 0x24
296 #define PCI_CB_MEMORY_LIMIT_1 0x28
297 #define PCI_CB_IO_BASE_0 0x2c
298 #define PCI_CB_IO_BASE_0_HI 0x2e
299 #define PCI_CB_IO_LIMIT_0 0x30
300 #define PCI_CB_IO_LIMIT_0_HI 0x32
301 #define PCI_CB_IO_BASE_1 0x34
302 #define PCI_CB_IO_BASE_1_HI 0x36
303 #define PCI_CB_IO_LIMIT_1 0x38
304 #define PCI_CB_IO_LIMIT_1_HI 0x3a
305 #define PCI_CB_IO_RANGE_MASK ~0x03
306 /* 0x3c-0x3d are same as for htype 0 */
307 #define PCI_CB_BRIDGE_CONTROL 0x3e
308 #define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */
309 #define PCI_CB_BRIDGE_CTL_SERR 0x02
310 #define PCI_CB_BRIDGE_CTL_ISA 0x04
311 #define PCI_CB_BRIDGE_CTL_VGA 0x08
312 #define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20
313 #define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */
314 #define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */
315 #define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */
316 #define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
317 #define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400
318 #define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40
319 #define PCI_CB_SUBSYSTEM_ID 0x42
320 #define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */
321 /* 0x48-0x7f reserved */
323 /* Capability lists */
325 #define PCI_CAP_LIST_ID 0 /* Capability ID */
326 #define PCI_CAP_ID_PM 0x01 /* Power Management */
327 #define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */
328 #define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */
329 #define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */
330 #define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
331 #define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
332 #define PCI_CAP_ID_EXP 0x10 /* PCI Express */
333 #define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
334 #define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
335 #define PCI_CAP_SIZEOF 4
337 /* Power Management Registers */
339 #define PCI_PM_CAP_VER_MASK 0x0007 /* Version */
340 #define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */
341 #define PCI_PM_CAP_AUX_POWER 0x0010 /* Auxilliary power support */
342 #define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */
343 #define PCI_PM_CAP_D1 0x0200 /* D1 power state support */
344 #define PCI_PM_CAP_D2 0x0400 /* D2 power state support */
345 #define PCI_PM_CAP_PME 0x0800 /* PME pin supported */
346 #define PCI_PM_CTRL 4 /* PM control and status register */
347 #define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */
348 #define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */
349 #define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */
350 #define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */
351 #define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */
352 #define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */
353 #define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */
354 #define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */
355 #define PCI_PM_DATA_REGISTER 7 /* (??) */
356 #define PCI_PM_SIZEOF 8
360 #define PCI_AGP_VERSION 2 /* BCD version number */
361 #define PCI_AGP_RFU 3 /* Rest of capability flags */
362 #define PCI_AGP_STATUS 4 /* Status register */
363 #define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */
364 #define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */
365 #define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */
366 #define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */
367 #define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */
368 #define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */
369 #define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */
370 #define PCI_AGP_COMMAND 8 /* Control register */
371 #define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
372 #define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
373 #define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
374 #define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
375 #define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
376 #define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
377 #define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 4x rate */
378 #define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 4x rate */
379 #define PCI_AGP_SIZEOF 12
381 /* PCI-X registers */
383 #define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */
384 #define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */
385 #define PCI_X_CMD_MAX_READ 0x0000 /* Max Memory Read Byte Count */
386 #define PCI_X_CMD_MAX_SPLIT 0x0030 /* Max Outstanding Split Transactions */
387 #define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
390 /* Slot Identification */
392 #define PCI_SID_ESR 2 /* Expansion Slot Register */
393 #define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */
394 #define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */
395 #define PCI_SID_CHASSIS_NR 3 /* Chassis Number */
397 /* Message Signalled Interrupts registers */
399 #define PCI_MSI_FLAGS 2 /* Various flags */
400 #define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */
401 #define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */
402 #define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */
403 #define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */
404 #define PCI_MSI_RFU 3 /* Rest of capability flags */
405 #define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
406 #define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
407 #define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
408 #define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
410 #define PCI_MAX_PCI_DEVICES 32
411 #define PCI_MAX_PCI_FUNCTIONS 8
413 #define PCI_FIND_CAP_TTL 0x48
414 #define CAP_START_POS 0x40
416 /* Include the ID list */
422 #ifdef CONFIG_SYS_PCI_64BIT
423 typedef u64 pci_addr_t;
424 typedef u64 pci_size_t;
426 typedef u32 pci_addr_t;
427 typedef u32 pci_size_t;
431 pci_addr_t bus_start; /* Start on the bus */
432 phys_addr_t phys_start; /* Start in physical address space */
433 pci_size_t size; /* Size */
434 unsigned long flags; /* Resource flags */
436 pci_addr_t bus_lower;
439 #define PCI_REGION_MEM 0x00000000 /* PCI memory space */
440 #define PCI_REGION_IO 0x00000001 /* PCI IO space */
441 #define PCI_REGION_TYPE 0x00000001
442 #define PCI_REGION_PREFETCH 0x00000008 /* prefetchable PCI memory */
444 #define PCI_REGION_SYS_MEMORY 0x00000100 /* System memory */
445 #define PCI_REGION_RO 0x00000200 /* Read-only memory */
447 static inline void pci_set_region(struct pci_region *reg,
448 pci_addr_t bus_start,
449 phys_addr_t phys_start,
451 unsigned long flags) {
452 reg->bus_start = bus_start;
453 reg->phys_start = phys_start;
458 typedef int pci_dev_t;
460 #define PCI_BUS(d) (((d) >> 16) & 0xff)
461 #define PCI_DEV(d) (((d) >> 11) & 0x1f)
462 #define PCI_FUNC(d) (((d) >> 8) & 0x7)
463 #define PCI_DEVFN(d, f) ((d) << 11 | (f) << 8)
464 #define PCI_MASK_BUS(bdf) ((bdf) & 0xffff)
465 #define PCI_ADD_BUS(bus, devfn) (((bus) << 16) | (devfn))
466 #define PCI_BDF(b, d, f) ((b) << 16 | PCI_DEVFN(d, f))
467 #define PCI_VENDEV(v, d) (((v) << 16) | (d))
468 #define PCI_ANY_ID (~0)
470 struct pci_device_id {
471 unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
474 struct pci_controller;
476 struct pci_config_table {
477 unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
478 unsigned int class; /* Class ID, or PCI_ANY_ID */
479 unsigned int bus; /* Bus number, or PCI_ANY_ID */
480 unsigned int dev; /* Device number, or PCI_ANY_ID */
481 unsigned int func; /* Function number, or PCI_ANY_ID */
483 void (*config_device)(struct pci_controller* hose, pci_dev_t dev,
484 struct pci_config_table *);
485 unsigned long priv[3];
488 extern void pci_cfgfunc_do_nothing(struct pci_controller* hose, pci_dev_t dev,
489 struct pci_config_table *);
490 extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev,
491 struct pci_config_table *);
493 #define MAX_PCI_REGIONS 7
495 #define INDIRECT_TYPE_NO_PCIE_LINK 1
498 * Structure of a PCI controller (host bridge)
500 struct pci_controller {
503 struct udevice *ctlr;
505 struct pci_controller *next;
511 volatile unsigned int *cfg_addr;
512 volatile unsigned char *cfg_data;
516 struct pci_region regions[MAX_PCI_REGIONS];
519 struct pci_config_table *config_table;
521 void (*fixup_irq)(struct pci_controller *, pci_dev_t);
522 #ifndef CONFIG_DM_PCI
523 /* Low-level architecture-dependent routines */
524 int (*read_byte)(struct pci_controller*, pci_dev_t, int where, u8 *);
525 int (*read_word)(struct pci_controller*, pci_dev_t, int where, u16 *);
526 int (*read_dword)(struct pci_controller*, pci_dev_t, int where, u32 *);
527 int (*write_byte)(struct pci_controller*, pci_dev_t, int where, u8);
528 int (*write_word)(struct pci_controller*, pci_dev_t, int where, u16);
529 int (*write_dword)(struct pci_controller*, pci_dev_t, int where, u32);
532 /* Used by auto config */
533 struct pci_region *pci_mem, *pci_io, *pci_prefetch;
535 /* Used by ppc405 autoconfig*/
536 struct pci_region *pci_fb;
537 #ifndef CONFIG_DM_PCI
544 #ifndef CONFIG_DM_PCI
545 static inline void pci_set_ops(struct pci_controller *hose,
546 int (*read_byte)(struct pci_controller*,
547 pci_dev_t, int where, u8 *),
548 int (*read_word)(struct pci_controller*,
549 pci_dev_t, int where, u16 *),
550 int (*read_dword)(struct pci_controller*,
551 pci_dev_t, int where, u32 *),
552 int (*write_byte)(struct pci_controller*,
553 pci_dev_t, int where, u8),
554 int (*write_word)(struct pci_controller*,
555 pci_dev_t, int where, u16),
556 int (*write_dword)(struct pci_controller*,
557 pci_dev_t, int where, u32)) {
558 hose->read_byte = read_byte;
559 hose->read_word = read_word;
560 hose->read_dword = read_dword;
561 hose->write_byte = write_byte;
562 hose->write_word = write_word;
563 hose->write_dword = write_dword;
567 #ifdef CONFIG_PCI_INDIRECT_BRIDGE
568 extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
571 extern phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose,
572 pci_addr_t addr, unsigned long flags);
573 extern pci_addr_t pci_hose_phys_to_bus(struct pci_controller* hose,
574 phys_addr_t addr, unsigned long flags);
576 #define pci_phys_to_bus(dev, addr, flags) \
577 pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), (addr), (flags))
578 #define pci_bus_to_phys(dev, addr, flags) \
579 pci_hose_bus_to_phys(pci_bus_to_hose(PCI_BUS(dev)), (addr), (flags))
581 #define pci_virt_to_bus(dev, addr, flags) \
582 pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), \
583 (virt_to_phys(addr)), (flags))
584 #define pci_bus_to_virt(dev, addr, flags, len, map_flags) \
585 map_physmem(pci_hose_bus_to_phys(pci_bus_to_hose(PCI_BUS(dev)), \
589 #define pci_phys_to_mem(dev, addr) \
590 pci_phys_to_bus((dev), (addr), PCI_REGION_MEM)
591 #define pci_mem_to_phys(dev, addr) \
592 pci_bus_to_phys((dev), (addr), PCI_REGION_MEM)
593 #define pci_phys_to_io(dev, addr) pci_phys_to_bus((dev), (addr), PCI_REGION_IO)
594 #define pci_io_to_phys(dev, addr) pci_bus_to_phys((dev), (addr), PCI_REGION_IO)
596 #define pci_virt_to_mem(dev, addr) \
597 pci_virt_to_bus((dev), (addr), PCI_REGION_MEM)
598 #define pci_mem_to_virt(dev, addr, len, map_flags) \
599 pci_bus_to_virt((dev), (addr), PCI_REGION_MEM, (len), (map_flags))
600 #define pci_virt_to_io(dev, addr) \
601 pci_virt_to_bus((dev), (addr), PCI_REGION_IO)
602 #define pci_io_to_virt(dev, addr, len, map_flags) \
603 pci_bus_to_virt((dev), (addr), PCI_REGION_IO, (len), (map_flags))
605 extern int pci_hose_read_config_byte(struct pci_controller *hose,
606 pci_dev_t dev, int where, u8 *val);
607 extern int pci_hose_read_config_word(struct pci_controller *hose,
608 pci_dev_t dev, int where, u16 *val);
609 extern int pci_hose_read_config_dword(struct pci_controller *hose,
610 pci_dev_t dev, int where, u32 *val);
611 extern int pci_hose_write_config_byte(struct pci_controller *hose,
612 pci_dev_t dev, int where, u8 val);
613 extern int pci_hose_write_config_word(struct pci_controller *hose,
614 pci_dev_t dev, int where, u16 val);
615 extern int pci_hose_write_config_dword(struct pci_controller *hose,
616 pci_dev_t dev, int where, u32 val);
618 #ifndef CONFIG_DM_PCI
619 extern int pci_read_config_byte(pci_dev_t dev, int where, u8 *val);
620 extern int pci_read_config_word(pci_dev_t dev, int where, u16 *val);
621 extern int pci_read_config_dword(pci_dev_t dev, int where, u32 *val);
622 extern int pci_write_config_byte(pci_dev_t dev, int where, u8 val);
623 extern int pci_write_config_word(pci_dev_t dev, int where, u16 val);
624 extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val);
627 extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose,
628 pci_dev_t dev, int where, u8 *val);
629 extern int pci_hose_read_config_word_via_dword(struct pci_controller *hose,
630 pci_dev_t dev, int where, u16 *val);
631 extern int pci_hose_write_config_byte_via_dword(struct pci_controller *hose,
632 pci_dev_t dev, int where, u8 val);
633 extern int pci_hose_write_config_word_via_dword(struct pci_controller *hose,
634 pci_dev_t dev, int where, u16 val);
636 extern void *pci_map_bar(pci_dev_t pdev, int bar, int flags);
637 extern void pci_register_hose(struct pci_controller* hose);
638 extern struct pci_controller* pci_bus_to_hose(int bus);
639 extern struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr);
641 extern int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev);
642 extern int pci_hose_scan(struct pci_controller *hose);
643 extern int pci_hose_scan_bus(struct pci_controller *hose, int bus);
645 extern void pciauto_region_init(struct pci_region* res);
646 extern void pciauto_region_align(struct pci_region *res, pci_size_t size);
647 extern int pciauto_region_allocate(struct pci_region* res, pci_size_t size, pci_addr_t *bar);
648 extern void pciauto_setup_device(struct pci_controller *hose,
649 pci_dev_t dev, int bars_num,
650 struct pci_region *mem,
651 struct pci_region *prefetch,
652 struct pci_region *io);
653 extern void pciauto_prescan_setup_bridge(struct pci_controller *hose,
654 pci_dev_t dev, int sub_bus);
655 extern void pciauto_postscan_setup_bridge(struct pci_controller *hose,
656 pci_dev_t dev, int sub_bus);
657 extern void pciauto_config_init(struct pci_controller *hose);
658 extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
660 extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device, int index);
661 extern pci_dev_t pci_find_devices (struct pci_device_id *ids, int index);
662 pci_dev_t pci_find_class(unsigned int find_class, int index);
664 extern int pci_hose_config_device(struct pci_controller *hose,
668 unsigned long command);
670 extern int pci_hose_find_capability(struct pci_controller *hose, pci_dev_t dev,
672 extern int pci_hose_find_cap_start(struct pci_controller *hose, pci_dev_t dev,
674 extern int pci_find_cap(struct pci_controller *hose, pci_dev_t dev, int pos,
677 #ifdef CONFIG_PCI_FIXUP_DEV
678 extern void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev,
679 unsigned short vendor,
680 unsigned short device,
681 unsigned short class);
684 const char * pci_class_str(u8 class);
685 int pci_last_busno(void);
687 #ifdef CONFIG_MPC85xx
688 extern void pci_mpc85xx_init (struct pci_controller *hose);
692 * pci_write_bar32() - Write the address of a BAR including control bits
694 * This writes a raw address (with control bits) to a bar
696 * @hose: PCI hose to use
697 * @dev: PCI device to update
698 * @barnum: BAR number (0-5)
699 * @addr: BAR address with control bits
701 void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum,
705 * pci_read_bar32() - read the address of a bar
707 * @hose: PCI hose to use
708 * @dev: PCI device to inspect
709 * @barnum: BAR number (0-5)
710 * @return address of the bar, masking out any control bits
712 u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum);
715 * pciauto_setup_rom() - Set up access to a device ROM
717 * @hose: PCI hose to use
718 * @dev: PCI device to adjust
719 * @return 0 if done, -ve on error
721 int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev);
724 * pci_hose_find_devices() - Find devices by vendor/device ID
726 * @hose: PCI hose to search
727 * @busnum: Bus number to search
728 * @ids: PCI vendor/device IDs to look for, terminated by 0, 0 record
729 * @indexp: Pointer to device index to find. To find the first matching
730 * device, pass 0; to find the second, pass 1, etc. This
731 * parameter is decremented for each non-matching device so
732 * can be called repeatedly.
734 pci_dev_t pci_hose_find_devices(struct pci_controller *hose, int busnum,
735 struct pci_device_id *ids, int *indexp);
737 /* Access sizes for PCI reads and writes */
748 * struct pci_child_platdata - information stored about each PCI device
750 * Every device on a PCI bus has this per-child data.
752 * It can be accessed using dev_get_parentdata(dev) if dev->parent is a
753 * PCI bus (i.e. UCLASS_PCI)
755 * @devfn: Encoded device and function index - see PCI_DEVFN()
756 * @vendor: PCI vendor ID (see pci_ids.h)
757 * @device: PCI device ID (see pci_ids.h)
758 * @class: PCI class, 3 bytes: (base, sub, prog-if)
760 struct pci_child_platdata {
762 unsigned short vendor;
763 unsigned short device;
767 /* PCI bus operations */
770 * read_config() - Read a PCI configuration value
772 * PCI buses must support reading and writing configuration values
773 * so that the bus can be scanned and its devices configured.
775 * Normally PCI_BUS(@bdf) is the same as @bus->seq, but not always.
776 * If bridges exist it is possible to use the top-level bus to
777 * access a sub-bus. In that case @bus will be the top-level bus
778 * and PCI_BUS(bdf) will be a different (higher) value
780 * @bus: Bus to read from
781 * @bdf: Bus, device and function to read
782 * @offset: Byte offset within the device's configuration space
783 * @valuep: Place to put the returned value
785 * @return 0 if OK, -ve on error
787 int (*read_config)(struct udevice *bus, pci_dev_t bdf, uint offset,
788 ulong *valuep, enum pci_size_t size);
790 * write_config() - Write a PCI configuration value
792 * @bus: Bus to write to
793 * @bdf: Bus, device and function to write
794 * @offset: Byte offset within the device's configuration space
795 * @value: Value to write
797 * @return 0 if OK, -ve on error
799 int (*write_config)(struct udevice *bus, pci_dev_t bdf, uint offset,
800 ulong value, enum pci_size_t size);
803 /* Get access to a PCI bus' operations */
804 #define pci_get_ops(dev) ((struct dm_pci_ops *)(dev)->driver->ops)
807 * pci_bind_bus_devices() - scan a PCI bus and bind devices
809 * Scan a PCI bus looking for devices. Bind each one that is found. If
810 * devices are already bound that match the scanned devices, just update the
811 * child data so that the device can be used correctly (this happens when
812 * the device tree describes devices we expect to see on the bus).
814 * Devices that are bound in this way will use a generic PCI driver which
815 * does nothing. The device can still be accessed but will not provide any
818 * @bus: Bus containing devices to bind
819 * @return 0 if OK, -ve on error
821 int pci_bind_bus_devices(struct udevice *bus);
824 * pci_auto_config_devices() - configure bus devices ready for use
826 * This works through all devices on a bus by scanning the driver model
827 * data structures (normally these have been set up by pci_bind_bus_devices()
830 * Space is allocated for each PCI base address register (BAR) so that the
831 * devices are mapped into memory and I/O space ready for use.
833 * @bus: Bus containing devices to bind
834 * @return 0 if OK, -ve on error
836 int pci_auto_config_devices(struct udevice *bus);
839 * pci_bus_find_bdf() - Find a device given its PCI bus address
841 * @bdf: PCI device address: bus, device and function -see PCI_BDF()
842 * @devp: Returns the device for this address, if found
843 * @return 0 if OK, -ENODEV if not found
845 int pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp);
848 * pci_bus_find_devfn() - Find a device on a bus
850 * @find_devfn: PCI device address (device and function only)
851 * @devp: Returns the device for this address, if found
852 * @return 0 if OK, -ENODEV if not found
854 int pci_bus_find_devfn(struct udevice *bus, pci_dev_t find_devfn,
855 struct udevice **devp);
858 * pci_get_ff() - Returns a mask for the given access size
861 * @return 0xff for PCI_SIZE_8, 0xffff for PCI_SIZE_16, 0xffffffff for
864 int pci_get_ff(enum pci_size_t size);
867 * pci_bus_find_devices () - Find devices on a bus
869 * @bus: Bus to search
870 * @ids: PCI vendor/device IDs to look for, terminated by 0, 0 record
871 * @indexp: Pointer to device index to find. To find the first matching
872 * device, pass 0; to find the second, pass 1, etc. This
873 * parameter is decremented for each non-matching device so
874 * can be called repeatedly.
875 * @devp: Returns matching device if found
876 * @return 0 if found, -ENODEV if not
878 int pci_bus_find_devices(struct udevice *bus, struct pci_device_id *ids,
879 int *indexp, struct udevice **devp);
882 * pci_find_device_id() - Find a device on any bus
884 * @ids: PCI vendor/device IDs to look for, terminated by 0, 0 record
885 * @index: Index number of device to find, 0 for the first match, 1 for
887 * @devp: Returns matching device if found
888 * @return 0 if found, -ENODEV if not
890 int pci_find_device_id(struct pci_device_id *ids, int index,
891 struct udevice **devp);
894 * dm_pci_hose_probe_bus() - probe a subordinate bus, scanning it for devices
896 * This probes the given bus which causes it to be scanned for devices. The
897 * devices will be bound but not probed.
899 * @hose specifies the PCI hose that will be used for the scan. This is
900 * always a top-level bus with uclass UCLASS_PCI. The bus to scan is
901 * in @bdf, and is a subordinate bus reachable from @hose.
903 * @hose: PCI hose to scan
904 * @bdf: PCI bus address to scan (PCI_BUS(bdf) is the bus number)
905 * @return 0 if OK, -ve on error
907 int dm_pci_hose_probe_bus(struct pci_controller *hose, pci_dev_t bdf);
910 * pci_bus_read_config() - Read a configuration value from a device
912 * TODO(sjg@chromium.org): We should be able to pass just a device and have
913 * it do the right thing. It would be good to have that function also.
915 * @bus: Bus to read from
916 * @bdf: PCI device address: bus, device and function -see PCI_BDF()
917 * @valuep: Place to put the returned value
919 * @return 0 if OK, -ve on error
921 int pci_bus_read_config(struct udevice *bus, pci_dev_t bdf, int offset,
922 unsigned long *valuep, enum pci_size_t size);
925 * pci_bus_write_config() - Write a configuration value to a device
927 * @bus: Bus to write from
928 * @bdf: PCI device address: bus, device and function -see PCI_BDF()
929 * @value: Value to write
931 * @return 0 if OK, -ve on error
933 int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset,
934 unsigned long value, enum pci_size_t size);
937 * The following functions provide access to the above without needing the
938 * size parameter. We are trying to encourage the use of the 8/16/32-style
939 * functions, rather than byte/word/dword. But both are supported.
941 int pci_write_config32(pci_dev_t pcidev, int offset, u32 value);
943 /* Compatibility with old naming */
944 static inline int pci_write_config_dword(pci_dev_t pcidev, int offset,
947 return pci_write_config32(pcidev, offset, value);
950 int pci_write_config16(pci_dev_t pcidev, int offset, u16 value);
952 /* Compatibility with old naming */
953 static inline int pci_write_config_word(pci_dev_t pcidev, int offset,
956 return pci_write_config16(pcidev, offset, value);
959 int pci_write_config8(pci_dev_t pcidev, int offset, u8 value);
961 /* Compatibility with old naming */
962 static inline int pci_write_config_byte(pci_dev_t pcidev, int offset,
965 return pci_write_config8(pcidev, offset, value);
968 int pci_read_config32(pci_dev_t pcidev, int offset, u32 *valuep);
970 /* Compatibility with old naming */
971 static inline int pci_read_config_dword(pci_dev_t pcidev, int offset,
974 return pci_read_config32(pcidev, offset, valuep);
977 int pci_read_config16(pci_dev_t pcidev, int offset, u16 *valuep);
979 /* Compatibility with old naming */
980 static inline int pci_read_config_word(pci_dev_t pcidev, int offset,
983 return pci_read_config16(pcidev, offset, valuep);
986 int pci_read_config8(pci_dev_t pcidev, int offset, u8 *valuep);
988 /* Compatibility with old naming */
989 static inline int pci_read_config_byte(pci_dev_t pcidev, int offset,
992 return pci_read_config8(pcidev, offset, valuep);
996 * struct dm_pci_emul_ops - PCI device emulator operations
998 struct dm_pci_emul_ops {
1000 * get_devfn(): Check which device and function this emulators
1002 * @dev: device to check
1003 * @return the device and function this emulates, or -ve on error
1005 int (*get_devfn)(struct udevice *dev);
1007 * read_config() - Read a PCI configuration value
1009 * @dev: Emulated device to read from
1010 * @offset: Byte offset within the device's configuration space
1011 * @valuep: Place to put the returned value
1012 * @size: Access size
1013 * @return 0 if OK, -ve on error
1015 int (*read_config)(struct udevice *dev, uint offset, ulong *valuep,
1016 enum pci_size_t size);
1018 * write_config() - Write a PCI configuration value
1020 * @dev: Emulated device to write to
1021 * @offset: Byte offset within the device's configuration space
1022 * @value: Value to write
1023 * @size: Access size
1024 * @return 0 if OK, -ve on error
1026 int (*write_config)(struct udevice *dev, uint offset, ulong value,
1027 enum pci_size_t size);
1029 * read_io() - Read a PCI I/O value
1031 * @dev: Emulated device to read from
1032 * @addr: I/O address to read
1033 * @valuep: Place to put the returned value
1034 * @size: Access size
1035 * @return 0 if OK, -ENOENT if @addr is not mapped by this device,
1036 * other -ve value on error
1038 int (*read_io)(struct udevice *dev, unsigned int addr, ulong *valuep,
1039 enum pci_size_t size);
1041 * write_io() - Write a PCI I/O value
1043 * @dev: Emulated device to write from
1044 * @addr: I/O address to write
1045 * @value: Value to write
1046 * @size: Access size
1047 * @return 0 if OK, -ENOENT if @addr is not mapped by this device,
1048 * other -ve value on error
1050 int (*write_io)(struct udevice *dev, unsigned int addr,
1051 ulong value, enum pci_size_t size);
1053 * map_physmem() - Map a device into sandbox memory
1055 * @dev: Emulated device to map
1056 * @addr: Memory address, normally corresponding to a PCI BAR.
1057 * The device should have been configured to have a BAR
1059 * @lenp: On entry, the size of the area to map, On exit it is
1060 * updated to the size actually mapped, which may be less
1061 * if the device has less space
1062 * @ptrp: Returns a pointer to the mapped address. The device's
1063 * space can be accessed as @lenp bytes starting here
1064 * @return 0 if OK, -ENOENT if @addr is not mapped by this device,
1065 * other -ve value on error
1067 int (*map_physmem)(struct udevice *dev, phys_addr_t addr,
1068 unsigned long *lenp, void **ptrp);
1070 * unmap_physmem() - undo a memory mapping
1072 * This must be called after map_physmem() to undo the mapping.
1073 * Some devices can use this to check what has been written into
1074 * their mapped memory and perform an operations they require on it.
1075 * In this way, map/unmap can be used as a sort of handshake between
1076 * the emulated device and its users.
1078 * @dev: Emuated device to unmap
1079 * @vaddr: Mapped memory address, as passed to map_physmem()
1080 * @len: Size of area mapped, as returned by map_physmem()
1081 * @return 0 if OK, -ve on error
1083 int (*unmap_physmem)(struct udevice *dev, const void *vaddr,
1087 /* Get access to a PCI device emulator's operations */
1088 #define pci_get_emul_ops(dev) ((struct dm_pci_emul_ops *)(dev)->driver->ops)
1091 * sandbox_pci_get_emul() - Get the emulation device for a PCI device
1093 * Searches for a suitable emulator for the given PCI bus device
1095 * @bus: PCI bus to search
1096 * @find_devfn: PCI device and function address (PCI_DEVFN())
1097 * @emulp: Returns emulated device if found
1098 * @return 0 if found, -ENODEV if not found
1100 int sandbox_pci_get_emul(struct udevice *bus, pci_dev_t find_devfn,
1101 struct udevice **emulp);
1105 #endif /* __ASSEMBLY__ */