2 Mon Feb 10 10:32:17 1997 Fred Fish <fnf@cygnus.com>
4 * tic80.h (tic80_symbol_to_value): Change prototype to match
5 change in function, added class parameter.
7 Thu Feb 6 17:30:15 1997 Fred Fish <fnf@cygnus.com>
9 * tic80.h (TIC80_OPERAND_ENDMASK): Add for flagging TIc80
10 endmask fields, which are somewhat weird in that 0 and 32 are
11 treated exactly the same.
13 Thu Jan 30 13:46:18 1997 Fred Fish <fnf@cygnus.com>
15 * tic80.h: Change all the OPERAND defines to use the form (1 << X)
16 rather than a constant that is 2**X. Reorder them to put bits for
17 operands that have symbolic names in the upper bits, so they can
18 be packed into an int where the lower bits contain the value that
19 corresponds to that symbolic name.
20 (predefined_symbo): Add struct.
21 (tic80_predefined_symbols): Declare array of translations.
22 (tic80_num_predefined_symbols): Declare size of that array.
23 (tic80_value_to_symbol): Declare function.
24 (tic80_symbol_to_value): Declare function.
27 Wed Jan 29 09:37:25 1997 Jeffrey A Law (law@cygnus.com)
29 * mn10200.h (MN10200_OPERAND_RELAX): Define.
32 Sat Jan 18 15:18:59 1997 Fred Fish <fnf@cygnus.com>
34 * tic80.h (TIC80_NO_R0_DEST): Add for opcodes where r0 cannot
35 be the destination register.
37 Thu Jan 16 20:48:55 1997 Fred Fish <fnf@cygnus.com>
39 * tic80.h (struct tic80_opcode): Change "format" field to "flags".
40 (FMT_UNUSED, FMT_SI, FMT_LI, FMT_REG): Delete.
41 (TIC80_VECTOR): Define a flag bit for the flags. This one means
42 that the opcode can have two vector instructions in a single
43 32 bit word and we have to encode/decode both.
45 Tue Jan 14 19:37:09 1997 Fred Fish <fnf@cygnus.com>
47 * tic80.h (TIC80_OPERAND_PCREL): Renamed from
48 TIC80_OPERAND_RELATIVE for PC relative.
49 (TIC80_OPERAND_BASEREL): New flag bit for register
52 Mon Jan 13 15:56:38 1997 Fred Fish <fnf@cygnus.com>
54 * tic80.h (TIC80_OPERAND_FLOAT): Add for floating point operands.
56 Mon Jan 6 10:51:15 1997 Fred Fish <fnf@cygnus.com>
58 * tic80.h (TIC80_OPERAND_SCALED): Operand may have optional
59 ":s" modifier for scaling.
61 Sun Jan 5 12:12:19 1997 Fred Fish <fnf@cygnus.com>
63 * tic80.h (TIC80_OPERAND_M_SI): Add operand modifier for ":m".
64 (TIC80_OPERAND_M_LI): Ditto
66 Sat Jan 4 19:02:44 1997 Fred Fish <fnf@cygnus.com>
68 * tic80.h (TIC80_OPERAND_BITNUM): Renamed from TIC80_OPERAND_CC_SZ.
69 (TIC80_OPERAND_CC): New define for condition code operand.
70 (TIC80_OPERAND_CR): New define for control register operand.
72 Fri Jan 3 16:22:23 1997 Fred Fish <fnf@cygnus.com>
74 * tic80.h (struct tic80_opcode): Name changed.
75 (struct tic80_opcode): Remove format field.
76 (struct tic80_operand): Add insertion and extraction functions.
77 (TIC80_OPERAND_*): Remove old bogus values, start adding new
83 Tue Dec 31 15:05:41 1996 Michael Meissner <meissner@tiktok.cygnus.com>
85 * v850.h (V850_OPERAND_ADJUST_SHORT_MEMORY): New flag to adjust
86 type IV instruction offsets.
90 Fri Dec 27 22:23:10 1996 Fred Fish <fnf@cygnus.com>
95 Wed Dec 18 10:06:31 1996 Jeffrey A Law (law@cygnus.com)
97 * mn10200.h (MN10200_OPERAND_NOCHECK): Define.
99 Sat Dec 14 10:48:31 1996 Fred Fish <fnf@ninemoons.com>
101 * mn10200.h: Fix comment, mn10200_operand not powerpc_operand.
102 * mn10300.h: Fix comment, mn10300_operand not powerpc_operand.
104 * v850.h: Fix comment, v850_operand not powerpc_operand.
107 Mon Dec 9 16:45:39 1996 Jeffrey A Law (law@cygnus.com)
109 * mn10200.h: Flesh out structures and definitions needed by
110 the mn10200 assembler & disassembler.
112 Tue Nov 26 10:46:56 1996 Ian Lance Taylor <ian@cygnus.com>
114 * mips.h: Add mips16 definitions.
116 Mon Nov 25 17:56:54 1996 J.T. Conklin <jtc@cygnus.com>
118 * m68k.h: Document new <, >, m, n, o and p operand specifiers.
120 Wed Nov 20 10:59:41 1996 Jeffrey A Law (law@cygnus.com)
122 * mn10300.h (MN10300_OPERAND_PCREL): Define.
123 (MN10300_OPERAND_MEMADDR): Define.
125 Tue Nov 19 13:30:40 1996 Jeffrey A Law (law@cygnus.com)
127 * mn10300.h (MN10300_OPERAND_REG_LIST): Define.
129 Wed Nov 6 13:41:08 1996 Jeffrey A Law (law@cygnus.com)
131 * mn10300.h (MN10300_OPERAND_SPLIT): Define.
133 Tue Nov 5 13:26:12 1996 Jeffrey A Law (law@cygnus.com)
135 * mn10300.h (MN10300_OPERAND_EXTENDED): Define.
137 Mon Nov 4 12:52:48 1996 Jeffrey A Law (law@cygnus.com)
139 * mn10300.h (MN10300_OPERAND_REPEATED): Define.
141 Fri Nov 1 10:31:02 1996 Richard Henderson <rth@tamu.edu>
143 * alpha.h: Don't include "bfd.h"; private relocation types are now
144 negative to minimize problems with shared libraries. Organize
145 instruction subsets by AMASK extensions and PALcode
147 (struct alpha_operand): Move flags slot for better packing.
150 Tue Oct 29 12:19:10 1996 Jeffrey A Law (law@cygnus.com)
152 * v850.h (V850_OPERAND_RELAX): New operand flag.
155 Thu Oct 10 14:29:11 1996 Jeffrey A Law (law@cygnus.com)
157 * mn10300.h (FMT_*): Move operand format definitions
160 Tue Oct 8 14:48:07 1996 Jeffrey A Law (law@cygnus.com)
162 * mn10300.h (MN10300_OPERAND_PAREN): Define.
164 Mon Oct 7 16:52:11 1996 Jeffrey A Law (law@cygnus.com)
166 * mn10300.h (mn10300_opcode): Add "format" field.
167 (MN10300_OPERAND_*): Define.
169 Thu Oct 3 10:33:46 1996 Jeffrey A Law (law@cygnus.com)
172 * mn10200.h, mn10300.h: New files.
174 Wed Oct 2 21:31:26 1996 Jeffrey A Law (law@cygnus.com)
176 * mn10x00.h: New file.
179 Fri Sep 27 18:26:46 1996 Stu Grossman (grossman@critters.cygnus.com)
181 * v850.h: Add new flag to indicate this instruction uses a PC
185 Fri Sep 13 14:58:13 1996 Jeffrey A Law (law@cygnus.com)
187 * h8300.h (stmac): Add missing instruction.
190 Sat Aug 31 16:02:03 1996 Jeffrey A Law (law@cygnus.com)
192 * v850.h (v850_opcode): Remove "size" field. Add "memop"
195 Fri Aug 23 10:39:08 1996 Jeffrey A Law (law@cygnus.com)
197 * v850.h (V850_OPERAND_EP): Define.
199 * v850.h (v850_opcode): Add size field.
201 Thu Aug 22 16:51:25 1996 J.T. Conklin <jtc@rtl.cygnus.com>
203 * v850.h (v850_operands): Add insert and extract fields, pointers
204 to functions used to handle unusual operand encoding.
205 (V850_OPERAND_REG, V850_OPERAND_SRG, V850_OPERAND_CC,
206 V850_OPERAND_SIGNED): Defined.
208 Wed Aug 21 17:45:10 1996 J.T. Conklin <jtc@rtl.cygnus.com>
210 * v850.h (v850_operands): Add flags field.
211 (OPERAND_REG, OPERAND_NUM): Defined.
213 Tue Aug 20 14:52:02 1996 J.T. Conklin <jtc@rtl.cygnus.com>
218 Fri Aug 16 14:44:15 1996 James G. Smith <jsmith@cygnus.co.uk>
220 * mips.h (OP_SH_LOCC, OP_SH_HICC, OP_MASK_CC, OP_SH_COP1NORM,
221 OP_MASK_COP1NORM, OP_SH_COP1SPEC, OP_MASK_COP1SPEC,
222 OP_MASK_COP1SCLR, OP_MASK_COP1CMP, OP_SH_COP1CMP, OP_SH_FORMAT,
223 OP_MASK_FORMAT, OP_SH_TRUE, OP_MASK_TRUE, OP_SH_GE, OP_MASK_GE,
224 OP_SH_UNSIGNED, OP_MASK_UNSIGNED, OP_SH_HINT, OP_MASK_HINT):
227 Fri Aug 16 00:15:15 1996 Jeffrey A Law (law@cygnus.com)
229 * hppa.h (pitlb, pitlbe, iitlba, iitlbp, fic, fice): Accept
230 a 3 bit space id instead of a 2 bit space id.
233 Thu Aug 15 13:11:46 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
235 * d10v.h: Add some additional defines to support the
236 assembler in determining which operations can be done in parallel.
239 Tue Aug 6 11:13:22 1996 Jeffrey A Law (law@cygnus.com)
241 * h8300.h (SN): Define.
242 (eepmov.b): Renamed from "eepmov"
243 (nop, bpt, rte, rts, sleep, clrmac): These have no size associated
247 Fri Jul 26 11:47:10 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
249 * d10v.h (OPERAND_SHIFT): New operand flag.
251 Thu Jul 25 12:06:22 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
253 * d10v.h: Changes for divs, parallel-only instructions, and
256 Mon Jul 22 11:21:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
258 * d10v.h (pd_reg): Define. Putting the definition here allows
259 the assembler and disassembler to share the same struct.
262 Mon Jul 22 12:15:25 1996 Ian Lance Taylor <ian@cygnus.com>
264 * i960.h (i960_opcodes): "halt" takes an argument. From Stephen
265 Williams <steve@icarus.com>.
268 Wed Jul 17 14:46:38 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
273 Thu Jul 11 12:09:15 1996 Jeffrey A Law (law@cygnus.com)
275 * h8300.h (band, bclr): Force high bit of immediate nibble to zero.
277 Wed Jul 3 14:30:12 1996 J.T. Conklin <jtc@rtl.cygnus.com>
279 * m68k.h (mcf5200): New macro.
280 Document names of coldfire control registers.
282 Tue Jul 2 23:05:45 1996 Jeffrey A Law (law@cygnus.com)
284 * h8300.h (SRC_IN_DST): Define.
286 * h8300.h (UNOP3): Mark the register operand in this insn
287 as a source operand, not a destination operand.
288 (SHIFT_2, SHIFT_IMM): Remove. Eliminate all references.
289 (UNOP3): Change SHIFT_IMM to IMM for H8/S bitops. Mark
290 register operand with SRC_IN_DST.
292 Fri Jun 21 13:52:17 1996 Richard Henderson <rth@tamu.edu>
296 Thu Jun 20 15:02:57 1996 Ian Lance Taylor <ian@cygnus.com>
298 * rs6k.h: Remove obsolete file.
300 Wed Jun 19 15:29:38 1996 Ian Lance Taylor <ian@cygnus.com>
302 * i386.h: Correct opcode values for faddp, fsubp, fsubrp, fmulp,
303 fdivp, and fdivrp. Add ffreep.
305 Tue Jun 18 16:06:00 1996 Jeffrey A. Law <law@rtl.cygnus.com>
307 * h8300.h: Reorder various #defines for readability.
308 (ABS32SRC, ABS32DST, DSP32LIST, ABS32LIST, A32LIST): Define.
309 (BITOP): Accept additional (unused) argument. All callers changed.
312 (ldc, stc, movb, movw, movl): Use 32bit offsets and absolutes.
314 * h8300.h (EXR, SHIFT_2, MACREG, SHIFT_IMM, RDINC): Define.
315 (O_TAS, O_CLRMAC, O_LDMAC, O_MAC, O_LDM, O_STM): Define.
316 (BITOP, EBITOP): Handle new H8/S addressing modes for
318 (UNOP3): Handle new shift/rotate insns on the H8/S.
319 (insns using exr): New instructions.
320 (tas, mac, ldmac, clrmac, ldm, stm): New instructions.
322 Thu May 23 16:56:48 1996 Jeffrey A Law (law@cygnus.com)
324 * h8300.h (add.l): Undo Apr 5th change. The manual I had
327 Mon May 6 23:38:22 1996 Jeffrey A Law (law@cygnus.com)
329 * h8300.h (START): Remove.
330 (MEMRELAX): Define. Mark absolute memory operands in mov.b, mov.w
331 and mov.l insns that can be relaxed.
333 Tue Apr 30 18:30:58 1996 Ian Lance Taylor <ian@cygnus.com>
335 * i386.h: Remove Abs32 from lcall.
337 Mon Apr 22 17:09:23 1996 Doug Evans <dje@blues.cygnus.com>
339 * sparc.h (SPARC_OPCODE_ARCH_V9_P): New macro.
341 Mark X,Y opcode letters as in use.
343 Thu Apr 11 17:28:18 1996 Ian Lance Taylor <ian@cygnus.com>
345 * sparc.h (F_FLOAT, F_FBR): Define.
347 Fri Apr 5 16:55:34 1996 Jeffrey A Law (law@cygnus.com)
349 * h8300.h (ABS8MEM): Renamed from ABSMOV. Remove ABSMOV
351 (ABS8SRC,ABS8DST): Add ABS8MEM.
352 (add.l): Fix reg+reg variant.
353 (eepmov.w): Renamed from eepmovw.
354 (ldc,stc): Fix many cases.
356 Sun Mar 31 13:30:03 1996 Doug Evans <dje@canuck.cygnus.com>
358 * sparc.h (SPARC_OPCODE_ARCH_MASK): New macro.
360 Thu Mar 7 15:08:23 1996 Doug Evans <dje@charmed.cygnus.com>
362 * sparc.h (O): Mark operand letter as in use.
364 Tue Feb 20 20:46:21 1996 Doug Evans <dje@charmed.cygnus.com>
366 * sparc.h (sparc_{encode,decode}_sparclet_cpreg): Declare.
367 Mark operand letters uU as in use.
369 Mon Feb 19 01:59:08 1996 Doug Evans <dje@charmed.cygnus.com>
371 * sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_SPARCLET.
372 (sparc_opcode_arch): Delete member `conflicts'. Add `supported'.
373 (SPARC_OPCODE_SUPPORTED): New macro.
374 (SPARC_OPCODE_CONFLICT_P): Rewrite.
377 Fri Feb 16 12:23:34 1996 Jeffrey A Law (law@cygnus.com)
379 * sparc.h (sparc_opcode_lookup_arch) Make return type in
380 declaration consistent with return type in definition.
382 Wed Feb 14 18:14:11 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
384 * i386.h (i386_optab): Remove Data32 from pushf and popf.
386 Thu Feb 8 14:27:21 1996 James Carlson <carlson@xylogics.com>
388 * i386.h (i386_regtab): Add 80486 test registers.
390 Mon Feb 5 18:35:46 1996 Ian Lance Taylor <ian@cygnus.com>
392 * i960.h (I_HX): Define.
393 (i960_opcodes): Add HX instruction.
395 Mon Jan 29 12:43:39 1996 Ken Raeburn <raeburn@cygnus.com>
397 * i386.h: Fix waiting forms of finit, fstenv, fsave, fstsw, fstcw,
400 Wed Jan 24 22:36:59 1996 Doug Evans <dje@charmed.cygnus.com>
402 * sparc.h (enum sparc_opcode_arch_val): Replaces sparc_architecture.
403 (SPARC_OPCODE_CONFLICT_P): Renamed from ARCHITECTURES_CONFLICT_P.
404 (bfd_* defines): Delete.
405 (sparc_opcode_archs): Replaces architecture_pname.
406 (sparc_opcode_lookup_arch): Declare.
407 (NUMOPCODES): Delete.
409 Mon Jan 22 08:24:32 1996 Doug Evans <dje@charmed.cygnus.com>
411 * sparc.h (enum sparc_architecture): Add v9a.
412 (ARCHITECTURES_CONFLICT_P): Update.
414 Thu Dec 28 13:27:53 1995 John Hassey <hassey@rtp.dg.com>
416 * i386.h: Added Pentium Pro instructions.
418 Thu Nov 2 22:59:22 1995 Ian Lance Taylor <ian@cygnus.com>
420 * m68k.h: Document new 'W' operand place.
422 Tue Oct 24 10:49:10 1995 Jeffrey A Law (law@cygnus.com)
424 * hppa.h: Add lci and syncdma instructions.
426 Mon Oct 23 11:09:16 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
428 * mips.h: Added INSN_4100 flag to mark NEC VR4100 specific
431 Mon Oct 16 10:28:15 1995 Michael Meissner <meissner@tiktok.cygnus.com>
433 * ppc.h (PPC_OPCODE_{COMMON,ANY}): New opcode flags for
434 assembler's -mcom and -many switches.
436 Wed Oct 11 16:56:33 1995 Ken Raeburn <raeburn@cygnus.com>
438 * i386.h: Fix cmpxchg8b extension opcode description.
440 Thu Oct 5 18:03:36 1995 Ken Raeburn <raeburn@cygnus.com>
442 * i386.h: Add Pentium instructions wrmsr, rdtsc, rdmsr, cmpxchg8b,
445 Tue Sep 19 15:26:43 1995 Ian Lance Taylor <ian@cygnus.com>
447 * m68k.h: Change comment: split type P into types 0, 1 and 2.
449 Wed Aug 30 13:50:55 1995 Doug Evans <dje@canuck.cygnus.com>
451 * sparc.h (sparc_{encode,decode}_prefetch): Declare.
453 Tue Aug 29 15:34:58 1995 Doug Evans <dje@canuck.cygnus.com>
455 * sparc.h (sparc_{encode,decode}_{asi,membar}): Declare.
457 Wed Aug 2 18:32:19 1995 Ian Lance Taylor <ian@cygnus.com>
461 * m68k.h: Move tables into opcodes/m68k-opc.c, leaving just the
462 declarations. Remove F_ALIAS and flag field of struct
463 m68k_opcode. Change arch field of struct m68k_opcode to unsigned
464 int. Make name and args fields of struct m68k_opcode const.
466 Wed Aug 2 08:16:46 1995 Doug Evans <dje@canuck.cygnus.com>
468 * sparc.h (F_NOTV9): Define.
470 Tue Jul 11 14:20:42 1995 Jeff Spiegel <jeffs@lsil.com>
472 * mips.h (INSN_4010): Define.
474 Wed Jun 21 18:49:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
476 * m68k.h (TBL1): Reverse sense of "round" argument in result.
478 Changes from Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>:
479 * m68k.h: Fix argument descriptions of coprocessor
480 instructions to allow only alterable operands where appropriate.
481 [!NO_DEFAULT_SIZES]: An omitted size defaults to `w'.
482 (m68k_opcode_aliases): Add more aliases.
485 Sat Apr 29 23:17:03 1995 Doug Evans <dje@chestnut.cygnus.com>
487 * arc.h (struct arc_opcode): New flag value ARC_OPCODE_COND_BRANCH.
488 (ARC_DELAY_{NONE,NORMAL,JUMP): Define delay slot types.
491 Fri Apr 14 22:15:34 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
493 * m68k.h: Added explcitly short-sized conditional branches, and a
494 bunch of aliases (fmov*, ftest*, tdivul) to support gcc's
495 svr4-based configurations.
498 Wed Apr 12 08:54:32 1995 Doug Evans <dje@canuck.cygnus.com>
500 * arc.h (struct arc_opcode): New members next_asm, next_dis.
501 (ARC_HASH_OPCODE, ARC_HASH_ICODE): Define.
502 (ARC_OPCODE_NEXT_ASM, ARC_OPCODE_NEXT_DIS): Define.
503 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): Add prototypes.
505 Thu Apr 6 20:36:55 1995 Doug Evans <dje@chestnut.cygnus.com>
507 * arc.h (arc_get_opcode_mach): Define prototype.
510 Mon Mar 13 21:30:01 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
512 Mon Feb 27 08:36:39 1995 Bryan Ford <baford@cs.utah.edu>
513 * i386.h: added missing Data16/Data32 flags to a few instructions.
515 Wed Mar 8 15:19:53 1995 Ian Lance Taylor <ian@cygnus.com>
517 * mips.h (OP_MASK_FR, OP_SH_FR): Define.
518 (OP_MASK_BCC, OP_SH_BCC): Define.
519 (OP_MASK_PREFX, OP_SH_PREFX): Define.
520 (OP_MASK_CCC, OP_SH_CCC): Define.
521 (INSN_READ_FPR_R): Define.
524 Wed Mar 8 03:13:23 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
526 * m68k.h (enum m68k_architecture): Deleted.
527 (struct m68k_opcode_alias): New type.
528 (m68k_opcodes): Now const. Deleted opcode aliases with exactly
529 matching constraints, values and flags. As a side effect of this,
530 the MOTOROLA_SYNTAX_ONLY and MIT_SYNTAX_ONLY macros, which so far
531 as I know were never used, now may need re-examining.
532 (numopcodes): Now const.
533 (m68k_opcode_aliases, numaliases): New variables.
535 [DONT_DEFINE_TABLE]: Declare numopcodes, numaliases, and
536 m68k_opcode_aliases; update declaration of m68k_opcodes.
539 Tue Mar 7 21:03:26 1995 Doug Evans <dje@chestnut.cygnus.com>
541 * arc.h (ARC_MACH_BIG): Define.
542 (ARC_MACH_MASK): Update.
543 (ARC_MACH_CPU_MASK): Define.
544 (ARC_OPCODE_CPU, ARC_OPVAL_CPU, ARC_HAVE_CPU): Likewise.
547 Mon Mar 6 10:02:00 1995 Jeff Law (law@snake.cs.utah.edu)
549 * hppa.h (delay_type): Delete unused enumeration.
550 (pa_opcode): Replace unused delayed field with an architecture
552 (pa_opcodes): Mark each instruction as either PA1.0 or PA1.1.
554 Fri Mar 3 16:10:24 1995 Ian Lance Taylor <ian@cygnus.com>
556 * mips.h (INSN_ISA4): Define.
558 Fri Feb 24 19:13:37 1995 Ian Lance Taylor <ian@cygnus.com>
560 * mips.h (M_DLA_AB, M_DLI): Define.
562 Thu Feb 23 17:33:09 1995 Jeff Law (law@snake.cs.utah.edu)
564 * hppa.h (fstwx): Fix single-bit error.
566 Wed Feb 15 12:19:52 1995 Ian Lance Taylor <ian@cygnus.com>
568 * mips.h (M_ULD, M_ULD_A, M_USD, M_USD_A): Define.
571 Mon Feb 13 11:05:00 1995 Doug Evans <dje@canuck.cygnus.com>
573 * arc.h (ARC_OPERAND_LIMM): New flag.
574 (ARC_OPERAND_ADDRESS): Likewise.
576 Thu Feb 9 18:55:59 1995 Doug Evans <dje@canuck.cygnus.com>
578 * arc.h (ARC_MACH_{BASE,HOST,GRAPHICS,AUDIO}): Define.
579 (ARC_MACH_MASK, ARC_OPCODE_MACH, ARC_OPVAL_MACH): Define.
580 (ARC_HAVE_MULT_SHIFT): Delete.
581 (ARC_HAVE_MACH): Define.
582 (struct arc_opcode): New field `flags'.
583 (struct arc_operand_value): Ditto.
584 (arc_opcode_supported): New function.
585 (arc_opval_supported): Ditto.
588 Mon Feb 6 10:35:23 1995 J.T. Conklin <jtc@rtl.cygnus.com>
590 * i386.h: added cpuid instruction , and dr[0-7] aliases for the
591 debug registers. From Charles Hannum (mycroft@netbsd.org).
593 Mon Feb 6 03:31:54 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
595 Changes from Bryan Ford <baford@schirf.cs.utah.edu> for 16-bit
597 * i386.h (MOV_AX_DISP32): New macro.
598 (i386_optab): Added Data16 and Data32 as needed. Added "w" forms
599 of several call/return instructions.
600 (ADDR_PREFIX_OPCODE): New macro.
602 Mon Jan 23 16:45:43 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
604 Sat Jan 21 17:50:38 1995 Pat Rankin (rankin@eql.caltech.edu)
606 * ../include/opcode/vax.h (struct vot_wot, field `args'): make
607 it pointer to const char;
608 (struct vot, field `name'): ditto.
610 Thu Jan 19 14:47:53 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
612 * vax.h: Supply and properly group all values in end sentinel.
614 Tue Jan 17 10:55:30 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
616 * mips.h (INSN_ISA, INSN_4650): Define.
619 Mon Dec 19 12:15:52 1994 Doug Evans <dje@canuck.cygnus.com>
621 * arc.h: Misc. cleanup. Merge "modifiers" into flags field.
622 Support multiply/shift insns.
626 Tue Nov 29 17:52:41 1994 Doug Evans <dje@canuck.cygnus.com>
631 Wed Oct 19 13:34:17 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
633 * a29k.h: Add operand type 'I' for `inv' and `iretinv'. On
634 systems with a separate instruction and data cache, such as the
635 29040, these instructions take an optional argument.
637 Wed Sep 14 17:44:20 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
639 * mips.h (INSN_STORE_MEMORY): Correct value to not conflict with
642 Tue Sep 6 11:39:08 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
644 * mips.h (INSN_STORE_MEMORY): Define.
646 Thu Jul 28 19:28:07 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
648 * sparc.h: Document new operand type 'x'.
650 Tue Jul 26 17:48:05 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
652 * i960.h (I_CX2): New instruction category. It includes
653 instructions available on Cx and Jx processors.
654 (I_JX): New instruction category, for JX-only instructions.
655 (i960_opcodes): Put eshro and sysctl in I_CX2 category. Added
656 Jx-only instructions, in I_JX category.
658 Wed Jul 13 18:43:47 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
660 * ns32k.h (endop): Made pointer const too.
662 Sun Jul 10 11:01:09 1994 Ian Dall (dall@hfrd.dsto.gov.au)
664 * ns32k.h: Drop Q operand type as there is no correct use
665 for it. Add I and Z operand types which allow better checking.
667 Thu Jul 7 12:34:48 1994 Steve Chamberlain (sac@jonny.cygnus.com)
669 * h8300.h (xor.l) :fix bit pattern.
670 (L_2): New size of operand.
673 Fri Jun 10 16:38:11 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
675 * m68k.h: Move "trap" before "tpcc" to change disassembly.
677 Fri Jun 3 15:57:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
679 * sparc.h: Include v9 definitions.
681 Thu Jun 2 12:23:17 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
683 * m68k.h (m68060): Defined.
684 (m68040up, mfloat, mmmu): Include it.
685 (struct m68k_opcode): Widen `arch' field.
686 (m68k_opcodes): Updated for M68060. Removed comments that were
687 instructions commented out by "JF" years ago.
689 Thu Apr 28 18:31:14 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
691 * m68k.h (struct m68k_opcode): Shorten `arch' field to 8 bits, and
692 add a one-bit `flags' field.
693 (F_ALIAS): New macro.
695 Wed Apr 27 11:29:52 1994 Steve Chamberlain (sac@cygnus.com)
697 * h8300.h (dec, inc): Get encoding right.
699 Mon Apr 4 13:12:43 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
701 * ppc.h (struct powerpc_operand): Removed signedp field; just use
703 (PPC_OPERAND_SIGNED): Define.
704 (PPC_OPERAND_SIGNOPT): Define.
706 Thu Mar 31 19:34:08 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
708 * i386.h (IS_JUMP_ON_ECX_ZERO, "jcxz" pattern): Operand size
709 prefix is 0x66, not 0x67. Patch from H.J. Lu (hlu@nynexst.com).
711 Thu Mar 3 15:51:05 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
713 * i386.h: Reverse last change. It'll be handled in gas instead.
715 Thu Feb 24 15:29:05 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
717 * i386.h (sar): Disabled the two-operand Imm1 form, since it was
718 slower on the 486 and used the implicit shift count despite the
719 explicit operand. The one-operand form is still available to get
720 the shorter form with the implicit shift count.
722 Thu Feb 17 12:27:52 1994 Torbjorn Granlund (tege@mexican.cygnus.com)
724 * hppa.h: Fix typo in fstws arg string.
726 Wed Feb 9 21:23:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
728 * ppc.h (struct powerpc_opcode): Make operands field unsigned.
730 Mon Feb 7 19:14:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
732 * ppc.h (PPC_OPCODE_601): Define.
734 Fri Feb 4 23:43:50 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
736 * hppa.h (addb): Use '@' for addb and addib pseudo ops.
737 (so we can determine valid completers for both addb and addb[tf].)
739 * hppa.h (xmpyu): No floating point format specifier for the
742 Fri Feb 4 23:36:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
744 * ppc.h (PPC_OPERAND_NEXT): Define.
745 (PPC_OPERAND_NEGATIVE): Change value to make room for above.
746 (struct powerpc_macro): Define.
747 (powerpc_macros, powerpc_num_macros): Declare.
749 Fri Jan 21 19:13:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
751 * ppc.h: New file. Header file for PowerPC opcode table.
753 Mon Jan 17 00:14:23 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
755 * hppa.h: More minor template fixes for sfu and copr (to allow
756 for easier disassembly).
758 * hppa.h: Fix templates for all the sfu and copr instructions.
760 Wed Dec 15 15:12:42 1993 Ken Raeburn (raeburn@cujo.cygnus.com)
762 * i386.h (push): Permit Imm16 operand too.
764 Sat Dec 11 16:14:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
766 * h8300.h (andc): Exists in base arch.
768 Wed Dec 1 12:15:32 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
770 * From Hisashi MINAMINO <minamino@sramhc.sra.co.jp>
771 * hppa.h: #undef NONE to avoid conflict with hiux include files.
773 Sun Nov 21 22:06:57 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
775 * hppa.h: Add FP quadword store instructions.
777 Wed Nov 17 17:13:16 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
779 * mips.h: (M_J_A): Added.
782 Mon Nov 8 12:12:47 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
784 * mips.h (OP_MASK_CACHE, OP_SH_CACHE): Define. From Ted Lemon
785 <mellon@pepper.ncd.com>.
787 Sun Nov 7 00:30:11 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
789 * hppa.h: Immediate field in probei instructions is unsigned,
790 not low-sign extended.
792 Wed Nov 3 10:30:00 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
794 * m88k.h (RRI10MASK): Change from 0xfc00ffe0 to 0xfc00fc00.
796 Tue Nov 2 12:41:30 1993 Ken Raeburn (raeburn@rover.cygnus.com)
798 * i386.h: Add "fxch" without operand.
800 Mon Nov 1 18:13:03 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
802 * mips.h (M_JAL_1, M_JAL_2, M_JAL_A): Added.
804 Sat Oct 2 22:26:11 1993 Jeffrey A Law (law@snake.cs.utah.edu)
806 * hppa.h: Add gfw and gfr to the opcode table.
808 Wed Sep 29 16:23:00 1993 K. Richard Pixley (rich@sendai.cygnus.com)
810 * m88k.h: extended to handle m88110.
812 Tue Sep 28 19:19:08 1993 Jeffrey A Law (law@snake.cs.utah.edu)
814 * hppa.h (be, ble): Use operand type 'z' to denote absolute branch
817 Tue Sep 14 14:04:35 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
819 * i960.h (i960_opcodes): Properly bracket initializers.
821 Mon Sep 13 12:50:52 1993 K. Richard Pixley (rich@sendai.cygnus.com)
823 * m88k.h (BOFLAG): rewrite to avoid nested comment.
825 Mon Sep 13 15:46:06 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
827 * m68k.h (two): Protect second argument with parentheses.
829 Fri Sep 10 16:29:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
831 * i386.h (i386_optab): Added new instruction "rsm" (for i386sl).
832 Deleted old in/out instructions in "#if 0" section.
834 Thu Sep 9 17:42:19 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
836 * i386.h (i386_optab): Properly bracket initializers.
838 Wed Aug 25 13:50:56 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
840 * hppa.h (pa_opcode): Use '|' for movb and movib insns. (From
841 Jeff Law, law@cs.utah.edu).
843 Mon Aug 23 16:55:03 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
845 * i386.h (lcall): Accept Imm32 operand also.
847 Mon Aug 23 12:43:11 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
849 * mips.h (M_ABSU): Removed (absolute value of unsigned number??).
852 Thu Aug 19 15:08:37 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
854 * mips.h (INSN_*): Changed values. Removed unused definitions.
855 Added INSN_COND_BRANCH_LIKELY, INSN_ISA2 and INSN_ISA3. Split
856 INSN_LOAD_DELAY into INSN_LOAD_MEMORY_DELAY and
857 INSN_LOAD_COPROC_DELAY. Split INSN_COPROC_DELAY into
858 INSN_COPROC_MOVE_DELAY and INSN_COPROC_MEMORY_DELAY.
859 (M_*): Added new values for r6000 and r4000 macros.
860 (ANY_DELAY): Removed.
862 Wed Aug 18 15:37:48 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
864 * mips.h: Added M_LI_S and M_LI_SS.
866 Tue Aug 17 07:08:08 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
868 * h8300.h: Get some rare mov.bs correct.
870 Thu Aug 5 09:15:17 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
872 * sparc.h: Don't define const ourself; rely on ansidecl.h having
875 Fri Jul 30 18:41:11 1993 John Gilmore (gnu@cygnus.com)
877 * sparc.h (F_JSR, F_UNBR, F_CONDBR): Add new flags to mark
878 jump instructions, for use in disassemblers.
880 Thu Jul 22 07:25:27 1993 Ian Lance Taylor (ian@cygnus.com)
882 * m88k.h: Make bitfields just unsigned, not unsigned long or
885 Wed Jul 21 11:55:31 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
887 * hppa.h: New argument type 'y'. Use in various float instructions.
889 Mon Jul 19 17:17:03 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
891 * hppa.h (break): First immediate field is unsigned.
893 * hppa.h: Add rfir instruction.
895 Sun Jul 18 16:28:08 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
897 * mips.h: Split the actual table out into ../../opcodes/mips-opc.c.
899 Fri Jul 16 09:59:29 1993 Ian Lance Taylor (ian@cygnus.com)
901 * mips.h: Reworked the hazard information somewhat, and fixed some
902 bugs in the instruction hazard descriptions.
904 Thu Jul 15 12:42:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
906 * m88k.h: Corrected a couple of opcodes.
908 Tue Jul 6 15:17:35 1993 Ian Lance Taylor (ian@cygnus.com)
910 * mips.h: Replaced with version from Ralph Campbell and OSF. The
911 new version includes instruction hazard information, but is
912 otherwise reasonably similar.
914 Thu Jul 1 20:36:17 1993 Doug Evans (dje@canuck.cygnus.com)
916 * h8300.h: Fix typo in UNOP3 (affected sh[al][lr].l).
918 Fri Jun 11 18:38:44 1993 Ken Raeburn (raeburn@cygnus.com)
920 Patches from Jeff Law, law@cs.utah.edu:
921 * hppa.h: Clean up some of the OLD_TABLE, non-OLD_TABLE braindamage.
922 Make the tables be the same for the following instructions:
923 "bb", "addb[tf]", "addib[tf]", "add", "add[loc]", "addco",
924 "sh[123]add", "sh[123]add[lo]", "sub", "sub[obt]", "sub[bt]o",
925 "ds", "comclr", "addi", "addi[ot]", "addito", "subi", "subio",
926 "comiclr", "fadd", "fsub", "fmpy", "fdiv", "fsqrt", "fabs",
927 "frnd", "fcpy", "fcnvff", "fcnvxf", "fcnvfx", "fcnvfxt",
930 * hppa.h: Make new and old tables the same for "break", "mtctl",
931 "mfctl", "bb", "ssm", "rsm", "xmpyu", "fmpyadd", "fmpysub".
932 Fix typo in last patch. Collapse several #ifdefs into a
935 * hppa.h: Delete remaining OLD_TABLE code. Bring some
936 of the comments up-to-date.
938 * hppa.h: Update "free list" of letters and update
939 comments describing each letter's function.
941 Fri Jun 4 15:41:37 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
943 * h8300.h: checkpoint, includes H8/300-H opcodes.
945 Thu Jun 3 15:42:59 1993 Stu Grossman (grossman@cygnus.com)
947 * Patches from Jeffrey Law <law@cs.utah.edu>.
948 * hppa.h: Rework single precision FP
949 instructions so that they correctly disassemble code
952 Thu May 27 19:21:22 1993 Bruce Bauman (boot@osf.org)
954 * i386.h (i386_optab, mov pattern): Remove Mem16 restriction from
955 mov to allow instructions like mov ss,xyz(ecx) to assemble.
957 Tue May 25 00:39:40 1993 Ken Raeburn (raeburn@cygnus.com)
959 * hppa.h: Use new version from Utah if OLD_TABLE isn't defined;
960 gdb will define it for now.
962 Mon May 24 15:20:06 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
964 * sparc.h: Don't end enumerator list with comma.
966 Fri May 14 15:15:50 1993 Ian Lance Taylor (ian@cygnus.com)
968 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
969 * mips.h (OP_MASK_COPZ, OP_SH_COPZ): Define.
970 ("bc2t"): Correct typo.
971 ("[ls]wc[023]"): Use T rather than t.
972 ("c[0123]"): Define general coprocessor instructions.
974 Mon May 10 06:02:25 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
976 * m68k.h: Move split point for gcc compilation more towards
979 Fri Apr 9 13:26:16 1993 Jim Kingdon (kingdon@cygnus.com)
981 * rs6k.h: Clean up instructions for primary opcode 19 (many were
982 simply wrong, ics, rfi, & rfsvc were missing).
983 Add "a" to opr_ext for "bb". Doc fix.
985 Thu Mar 18 13:45:31 1993 Per Bothner (bothner@rtl.cygnus.com)
987 * i386.h: 486 extensions from John Hassey (hassey@dg-rtp.dg.com).
988 * mips.h: Add casts, to suppress warnings about shifting too much.
989 * m68k.h: Document the placement code '9'.
991 Thu Feb 18 02:03:14 1993 John Gilmore (gnu@cygnus.com)
993 * m68k.h (BREAK_UP_BIG_DECL, AND_OTHER_PART): Add kludge which
994 allows callers to break up the large initialized struct full of
995 opcodes into two half-sized ones. This permits GCC to compile
996 this module, since it takes exponential space for initializers.
997 (numopcodes, endop): Revise to use AND_OTHER_PART in size calcs.
999 Thu Feb 4 02:06:56 1993 John Gilmore (gnu@cygnus.com)
1001 * a29k.h: Remove RCS crud, update GPL to v2, update copyrights.
1002 * convex.h: Added, from GDB's convx-opcode.h. Added CONST to all
1003 initialized structs in it.
1005 Thu Jan 28 21:32:22 1993 John Gilmore (gnu@cygnus.com)
1007 Delta 88 changes inspired by Carl Greco, <cgreco@Creighton.Edu>:
1008 * m88k.h (PMEM): Avoid previous definition from <sys/param.h>.
1009 (AND): Change to AND_ to avoid ansidecl.h `AND' conflict.
1011 Sat Jan 23 18:10:49 PST 1993 Ralph Campbell (ralphc@pyramid.com)
1013 * mips.h: document "i" and "j" operands correctly.
1015 Thu Jan 7 15:58:13 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1017 * mips.h: Removed endianness dependency.
1019 Sun Jan 3 14:13:35 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1021 * h8300.h: include info on number of cycles per instruction.
1023 Mon Dec 21 21:29:08 1992 Stu Grossman (grossman at cygnus.com)
1025 * hppa.h: Move handy aliases to the front. Fix masks for extract
1026 and deposit instructions.
1028 Sat Dec 12 16:09:48 1992 Ian Lance Taylor (ian@cygnus.com)
1030 * i386.h: accept shld and shrd both with and without the shift
1031 count argument, which is always %cl.
1033 Fri Nov 27 17:13:18 1992 Ken Raeburn (raeburn at cygnus.com)
1035 * i386.h (i386_optab_end, i386_regtab_end): Now const.
1036 (one_byte_segment_defaults, two_byte_segment_defaults,
1037 i386_prefixtab_end): Ditto.
1039 Mon Nov 23 10:47:25 1992 Ken Raeburn (raeburn@cygnus.com)
1041 * vax.h (bb*): Use "v" (bitfield type), not "a" (address operand)
1042 for operand 2; from John Carr, jfc@dsg.dec.com.
1044 Wed Nov 4 07:36:49 1992 Ken Raeburn (raeburn@cygnus.com)
1046 * m68k.h: Define FIXED_SIZE_BRANCH, so bsr and bra instructions
1047 always use 16-bit offsets. Makes calculated-size jump tables
1050 Fri Oct 16 22:52:43 1992 Ken Raeburn (raeburn@cygnus.com)
1052 * i386.h: Fix one-operand forms of in* and out* patterns.
1054 Tue Sep 22 14:08:14 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1056 * m68k.h: Added CPU32 support.
1058 Tue Sep 22 00:38:41 1992 John Gilmore (gnu@cygnus.com)
1060 * mips.h (break): Disassemble the argument. Patch from
1061 jonathan@cs.stanford.edu (Jonathan Stone).
1063 Wed Sep 9 11:25:28 1992 Ian Lance Taylor (ian@cygnus.com)
1065 * m68k.h: merged Motorola and MIT syntax.
1067 Thu Sep 3 09:33:22 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1069 * m68k.h (pmove): make the tests less strict, the 68k book is
1072 Tue Aug 25 23:25:19 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1074 * m68k.h (m68ec030): Defined as alias for 68030.
1075 (m68k_opcodes): New type characters "3" for 68030 MMU regs and "t"
1076 for immediate 0-7 added. Set up some opcodes (ptest, bkpt) to use
1077 them. Tightened description of "fmovex" to distinguish it from
1078 some "pmove" encodings. Added "pmove" for 68030 MMU regs, cleaned
1079 up descriptions that claimed versions were available for chips not
1080 supporting them. Added "pmovefd".
1082 Mon Aug 24 12:04:51 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1084 * m68k.h: fix where the . goes in divull
1086 Wed Aug 19 11:22:24 1992 Ian Lance Taylor (ian@cygnus.com)
1088 * m68k.h: the cas2 instruction is supposed to be written with
1089 indirection on the last two operands, which can be either data or
1090 address registers. Added a new operand type 'r' which accepts
1091 either register type. Added new cases for cas2l and cas2w which
1092 use them. Corrected masks for cas2 which failed to recognize use
1093 of address register.
1095 Fri Aug 14 14:20:38 1992 Per Bothner (bothner@cygnus.com)
1097 * m68k.h: Merged in patches (mostly m68040-specific) from
1098 Colin Smith <colin@wrs.com>.
1100 * m68k.h: Merged m68kmri.h and m68k.h (using the former as a
1101 base). Also cleaned up duplicates, re-ordered instructions for
1102 the sake of dis-assembling (so aliases come after standard names).
1103 * m68kmri.h: Now just defines some macros, and #includes m68k.h.
1105 Wed Aug 12 16:38:15 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1107 * m68kmri.h: added various opcodes. Moved jbxx to bxxes. Filled in
1110 Mon Aug 10 23:22:33 1992 Ken Raeburn (raeburn@cygnus.com)
1112 * sparc.h: Moved tables to BFD library.
1114 * i386.h (i386_optab): Add fildq, fistpq aliases used by gcc.
1116 Sun Jun 28 13:29:03 1992 Fred Fish (fnf@cygnus.com)
1118 * h8300.h: Finish filling in all the holes in the opcode table,
1119 so that the Lucid C compiler can digest this as well...
1121 Fri Jun 26 21:27:17 1992 John Gilmore (gnu at cygnus.com)
1123 * i386.h: Add setc, setnc, addr16, data16, repz, repnz aliases.
1124 Fix opcodes on various sizes of fild/fist instructions
1125 (16bit=no suffix, 32bit="l" suffix, 64bit="ll" suffix).
1126 Use tabs to indent for comments. Fixes suggested by Minh Tran-Le.
1128 Thu Jun 25 16:13:26 1992 Stu Grossman (grossman at cygnus.com)
1130 * h8300.h: Fill in all the holes in the opcode table so that the
1131 losing HPUX C compiler can digest this...
1133 Thu Jun 11 12:15:25 1992 John Gilmore (gnu at cygnus.com)
1135 * mips.h: Fix decoding of coprocessor instructions, somewhat.
1136 (Fix by Eric Anderson, 3jean@maas-neotek.arc.nasa.gov.)
1138 Thu May 28 11:17:44 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
1140 * sparc.h: Add new architecture variant sparclite; add its scan
1141 and divscc opcodes. Define ARCHITECTURES_CONFLICT_P macro.
1143 Tue May 5 14:23:27 1992 Per Bothner (bothner@rtl.cygnus.com)
1145 * mips.h: Add some more opcode synonyms (from Frank Yellin,
1148 Thu Apr 16 18:25:26 1992 Per Bothner (bothner@cygnus.com)
1150 * rs6k.h: New version from IBM (Metin).
1152 Thu Apr 9 00:31:19 1992 Per Bothner (bothner@rtl.cygnus.com)
1154 * rs6k.h: Fix incorrect extended opcode for instructions `fm'
1155 and `fd'. (From metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik).)
1157 Tue Apr 7 13:38:47 1992 Stu Grossman (grossman at cygnus.com)
1159 * rs6k.h: Move from ../../gdb/rs6k-opcode.h.
1161 Fri Apr 3 11:30:20 1992 Fred Fish (fnf@cygnus.com)
1163 * m68k.h (one, two): Cast macro args to unsigned to suppress
1164 complaints from compiler and lint about integer overflow during
1167 Sun Mar 29 12:22:08 1992 John Gilmore (gnu at cygnus.com)
1169 * sparc.h (OP): Avoid signed overflow when shifting to high order bit.
1171 Fri Mar 6 00:22:38 1992 John Gilmore (gnu at cygnus.com)
1173 * mips.h: Make bitfield layout depend on the HOST compiler,
1174 not on the TARGET system.
1176 Fri Feb 21 01:29:51 1992 K. Richard Pixley (rich@cygnus.com)
1178 * i386.h: added inb, inw, outb, outw opcodes, added att syntax for
1179 scmp, slod, smov, ssca, ssto. Curtesy Minh Tran-Le
1180 <TRANLE@INTELLICORP.COM>.
1182 Thu Jan 30 07:31:44 1992 Steve Chamberlain (sac at rtl.cygnus.com)
1184 * h8300.h: turned op_type enum into #define list
1186 Thu Jan 30 01:07:24 1992 John Gilmore (gnu at cygnus.com)
1188 * sparc.h: Remove "cypress" architecture. Remove "fitox" and
1189 similar instructions -- they've been renamed to "fitoq", etc.
1190 REALLY fix tsubcctv. Fix "fcmpeq" and "fcmpq" which had wrong
1191 number of arguments.
1192 * h8300.h: Remove extra ; which produces compiler warning.
1194 Tue Jan 28 22:59:22 1992 Stu Grossman (grossman at cygnus.com)
1196 * sparc.h: fix opcode for tsubcctv.
1198 Tue Jan 7 17:19:39 1992 K. Richard Pixley (rich at cygnus.com)
1200 * sparc.h: fba and cba are now aliases for fb and cb respectively.
1202 Fri Dec 27 10:55:50 1991 Per Bothner (bothner at cygnus.com)
1204 * sparc.h (nop): Made the 'lose' field be even tighter,
1205 so only a standard 'nop' is disassembled as a nop.
1207 Sun Dec 22 12:18:18 1991 Michael Tiemann (tiemann at cygnus.com)
1209 * sparc.h (nop): Add RD_GO to `lose' so that only %g0 in dest is
1210 disassembled as a nop.
1212 Tue Dec 10 00:22:20 1991 K. Richard Pixley (rich at rtl.cygnus.com)
1214 * sparc.h: fix a typo.
1216 Sat Nov 30 20:40:51 1991 Steve Chamberlain (sac at rtl.cygnus.com)
1218 * a29k.h, arm.h, h8300.h, i386.h, i860.h, i960.h , m68k.h,
1219 m88k.h, mips.h , np1.h, ns32k.h, pn.h, pyr.h, sparc.h, tahoe.h,
1220 vax.h, ChangeLog: renamed from ../<foo>-opcode.h
1224 version-control: never