3 * Benjamin Warren, biggerbadderben@gmail.com
5 * SPDX-License-Identifier: GPL-2.0+
9 * netdev.h - definitions an prototypes for network devices
16 * Board and CPU-specific initialization functions
17 * board_eth_init() has highest priority. cpu_eth_init() only
18 * gets called if board_eth_init() isn't instantiated or fails.
24 int board_eth_init(bd_t *bis);
25 int cpu_eth_init(bd_t *bis);
27 /* Driver initialization prototypes */
28 int altera_tse_initialize(u8 dev_num, int mac_base,
29 int sgdma_rx_base, int sgdma_tx_base,
30 u32 sgdma_desc_base, u32 sgdma_desc_size);
31 int at91emac_register(bd_t *bis, unsigned long iobase);
32 int au1x00_enet_initialize(bd_t*);
33 int ax88180_initialize(bd_t *bis);
34 int bcm_sf2_eth_register(bd_t *bis, u8 dev_num);
35 int bfin_EMAC_initialize(bd_t *bis);
36 int calxedaxgmac_initialize(u32 id, ulong base_addr);
37 int cs8900_initialize(u8 dev_num, int base_addr);
38 int davinci_emac_initialize(void);
39 int dc21x4x_initialize(bd_t *bis);
40 int designware_initialize(ulong base_addr, u32 interface);
41 int dm9000_initialize(bd_t *bis);
42 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
43 int e1000_initialize(bd_t *bis);
44 int eepro100_initialize(bd_t *bis);
45 int enc28j60_initialize(unsigned int bus, unsigned int cs,
46 unsigned int max_hz, unsigned int mode);
47 int ep93xx_eth_initialize(u8 dev_num, int base_addr);
48 int eth_3com_initialize (bd_t * bis);
49 int ethoc_initialize(u8 dev_num, int base_addr);
50 int fec_initialize (bd_t *bis);
51 int fecmxc_initialize(bd_t *bis);
52 int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
53 int ftgmac100_initialize(bd_t *bits);
54 int ftmac100_initialize(bd_t *bits);
55 int ftmac110_initialize(bd_t *bits);
56 int greth_initialize(bd_t *bis);
57 void gt6426x_eth_initialize(bd_t *bis);
58 int ks8695_eth_initialize(void);
59 int ks8851_mll_initialize(u8 dev_num, int base_addr);
60 int lan91c96_initialize(u8 dev_num, int base_addr);
61 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
62 int mcdmafec_initialize(bd_t *bis);
63 int mcffec_initialize(bd_t *bis);
64 int mpc512x_fec_initialize(bd_t *bis);
65 int mpc5xxx_fec_initialize(bd_t *bis);
66 int mpc82xx_scc_enet_initialize(bd_t *bis);
67 int mvgbe_initialize(bd_t *bis);
68 int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr);
69 int natsemi_initialize(bd_t *bis);
70 int ne2k_register(void);
71 int npe_initialize(bd_t *bis);
72 int ns8382x_initialize(bd_t *bis);
73 int pcnet_initialize(bd_t *bis);
74 int ppc_4xx_eth_initialize (bd_t *bis);
75 int rtl8139_initialize(bd_t *bis);
76 int rtl8169_initialize(bd_t *bis);
77 int scc_initialize(bd_t *bis);
78 int sh_eth_initialize(bd_t *bis);
79 int skge_initialize(bd_t *bis);
80 int smc91111_initialize(u8 dev_num, int base_addr);
81 int smc911x_initialize(u8 dev_num, int base_addr);
82 int sunxi_emac_initialize(bd_t *bis);
83 int sunxi_gmac_initialize(bd_t *bis);
84 int tsi108_eth_initialize(bd_t *bis);
85 int uec_standard_init(bd_t *bis);
86 int uli526x_initialize(bd_t *bis);
87 int armada100_fec_register(unsigned long base_addr);
88 int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
89 unsigned long dma_addr);
90 int xilinx_emaclite_of_init(const void *blob);
91 int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
93 int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
94 unsigned long ctrl_addr);
95 int zynq_gem_of_init(const void *blob);
96 int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio);
98 * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
99 * exported by a public hader file, we need a global definition at this point.
101 #if defined(CONFIG_XILINX_LL_TEMAC)
102 #define XILINX_LL_TEMAC_M_FIFO 0 /* use FIFO Ctrl */
103 #define XILINX_LL_TEMAC_M_SDMA_PLB (1 << 0)/* use SDMA Ctrl via PLB */
104 #define XILINX_LL_TEMAC_M_SDMA_DCR (1 << 1)/* use SDMA Ctrl via DCR */
107 /* Boards with PCI network controllers can call this from their board_eth_init()
108 * function to initialize whatever's on board.
109 * Return value is total # of devices found */
111 static inline int pci_eth_init(bd_t *bis)
117 #ifdef CONFIG_EEPRO100
118 num += eepro100_initialize(bis);
121 num += dc21x4x_initialize(bis);
124 num += e1000_initialize(bis);
127 num += pcnet_initialize(bis);
129 #ifdef CONFIG_NATSEMI
130 num += natsemi_initialize(bis);
132 #ifdef CONFIG_NS8382X
133 num += ns8382x_initialize(bis);
135 #if defined(CONFIG_RTL8139)
136 num += rtl8139_initialize(bis);
138 #if defined(CONFIG_RTL8169)
139 num += rtl8169_initialize(bis);
141 #if defined(CONFIG_ULI526X)
142 num += uli526x_initialize(bis);
145 #endif /* CONFIG_PCI */
150 * Boards with mv88e61xx switch can use this by defining
151 * CONFIG_MV88E61XX_SWITCH in respective board configheader file
152 * the stuct and enums here are used to specify switch configuration params
154 #if defined(CONFIG_MV88E61XX_SWITCH)
156 /* constants for any 88E61xx switch */
157 #define MV88E61XX_MAX_PORTS_NUM 6
159 enum mv88e61xx_cfg_mdip {
160 MV88E61XX_MDIP_NOCHANGE,
161 MV88E61XX_MDIP_REVERSE
164 enum mv88e61xx_cfg_ledinit {
165 MV88E61XX_LED_INIT_DIS,
166 MV88E61XX_LED_INIT_EN
169 enum mv88e61xx_cfg_rgmiid {
170 MV88E61XX_RGMII_DELAY_DIS,
171 MV88E61XX_RGMII_DELAY_EN
174 enum mv88e61xx_cfg_prtstt {
175 MV88E61XX_PORTSTT_DISABLED,
176 MV88E61XX_PORTSTT_BLOCKING,
177 MV88E61XX_PORTSTT_LEARNING,
178 MV88E61XX_PORTSTT_FORWARDING
181 struct mv88e61xx_config {
183 u8 vlancfg[MV88E61XX_MAX_PORTS_NUM];
184 enum mv88e61xx_cfg_rgmiid rgmii_delay;
185 enum mv88e61xx_cfg_prtstt portstate;
186 enum mv88e61xx_cfg_ledinit led_init;
187 enum mv88e61xx_cfg_mdip mdip;
193 * Common mappings for Internal VLANs
194 * These mappings consider that all ports are useable; the driver
195 * will mask inexistent/unused ports.
198 /* Switch mode : routes any port to any port */
199 #define MV88E61XX_VLANCFG_SWITCH { 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F }
201 /* Router mode: routes only CPU port 5 to/from non-CPU ports 0-4 */
202 #define MV88E61XX_VLANCFG_ROUTER { 0x20, 0x20, 0x20, 0x20, 0x20, 0x1F }
204 int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
205 #endif /* CONFIG_MV88E61XX_SWITCH */
207 struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id);
210 int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
211 struct mii_dev *bus, struct phy_device *phydev);
214 * Allow FEC to fine-tune MII configuration on boards which require this.
216 int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
219 #endif /* _NETDEV_H_ */