2 * Copyright (c) 2011-2013 Samsung Electronics Co., Ltd All Rights Reserved
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
17 #ifndef __NET_CONNECTION_INTF_H__
18 #define __NET_CONNECTION_INTF_H__
20 #include "connection_profile.h"
24 #endif /* __cplusplus */
27 * @addtogroup CAPI_NETWORK_CONNECTION_MANAGER_MODULE
32 * @brief The connection handle for all connection functions.
34 typedef void* connection_h;
37 * @brief The iterator handle for profiles.
39 typedef void* connection_profile_iterator_h;
42 * @brief Enumerations of connection type.
46 CONNECTION_TYPE_DISCONNECTED = 0, /**< Disconnected */
47 CONNECTION_TYPE_WIFI = 1, /**< Wi-Fi type */
48 CONNECTION_TYPE_CELLULAR = 2, /**< Cellular type */
49 CONNECTION_TYPE_ETHERNET = 3, /**< Ethernet type */
50 CONNECTION_TYPE_BT = 4, /**< Bluetooth type */
54 * @brief Enumerations of cellular network state.
58 CONNECTION_CELLULAR_STATE_OUT_OF_SERVICE = 0, /**< Out of service */
59 CONNECTION_CELLULAR_STATE_FLIGHT_MODE = 1, /**< Flight mode */
60 CONNECTION_CELLULAR_STATE_ROAMING_OFF = 2, /**< Roaming is turned off */
61 CONNECTION_CELLULAR_STATE_CALL_ONLY_AVAILABLE = 3, /**< Call is only available */
62 CONNECTION_CELLULAR_STATE_AVAILABLE = 4, /**< Available but not connected yet */
63 CONNECTION_CELLULAR_STATE_CONNECTED = 5, /**< Connected */
64 } connection_cellular_state_e;
67 * @brief This enumeration defines the Wi-Fi state.
71 CONNECTION_WIFI_STATE_DEACTIVATED = 0, /**< Wi-Fi is deactivated */
72 CONNECTION_WIFI_STATE_DISCONNECTED = 1, /**< Disconnected */
73 CONNECTION_WIFI_STATE_CONNECTED = 2, /**< Connected */
74 } connection_wifi_state_e;
77 * @brief This enumeration defines the ethernet state.
81 CONNECTION_ETHERNET_STATE_DEACTIVATED = 0, /**< There is no Ethernet profile to open */
82 CONNECTION_ETHERNET_STATE_DISCONNECTED = 1, /**< Disconnected */
83 CONNECTION_ETHERNET_STATE_CONNECTED = 2, /**< Connected */
84 } connection_ethernet_state_e;
87 * @brief This enumeration defines the Bluetooth state.
91 CONNECTION_BT_STATE_DEACTIVATED = 0, /**< There is no Bluetooth profile to open */
92 CONNECTION_BT_STATE_DISCONNECTED = 1, /**< Disconnected */
93 CONNECTION_BT_STATE_CONNECTED = 2, /**< Connected */
94 } connection_bt_state_e;
97 * @brief This enumeration defines the type of connection iterator.
101 CONNECTION_ITERATOR_TYPE_REGISTERED = 0, /**< The iterator of registered profile */
102 CONNECTION_ITERATOR_TYPE_CONNECTED = 1, /**< The iterator of connected profile */
103 } connection_iterator_type_e;
106 * @brief Enumerations of connection errors.
110 CONNECTION_ERROR_NONE = TIZEN_ERROR_NONE, /**< Successful */
111 CONNECTION_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER, /**< Invalid parameter */
112 CONNECTION_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY, /**< Out of memory error */
113 CONNECTION_ERROR_INVALID_OPERATION = TIZEN_ERROR_INVALID_OPERATION, /**< Invalid Operation */
114 CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED = TIZEN_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED, /**< Address family not supported */
115 CONNECTION_ERROR_OPERATION_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0401, /**< Operation failed */
116 CONNECTION_ERROR_ITERATOR_END = TIZEN_ERROR_NETWORK_CLASS|0x0402, /**< End of iteration */
117 CONNECTION_ERROR_NO_CONNECTION = TIZEN_ERROR_NETWORK_CLASS|0x0403, /**< There is no connection */
118 CONNECTION_ERROR_NOW_IN_PROGRESS = TIZEN_ERROR_NOW_IN_PROGRESS, /** Now in progress */
119 CONNECTION_ERROR_ALREADY_EXISTS = TIZEN_ERROR_NETWORK_CLASS|0x0404, /**< Already exists */
120 CONNECTION_ERROR_OPERATION_ABORTED = TIZEN_ERROR_NETWORK_CLASS|0x0405, /**< Operation is aborted */
121 CONNECTION_ERROR_DHCP_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0406, /**< DHCP failed */
122 CONNECTION_ERROR_INVALID_KEY = TIZEN_ERROR_NETWORK_CLASS|0x0407, /**< Invalid key */
123 CONNECTION_ERROR_NO_REPLY = TIZEN_ERROR_NETWORK_CLASS|0x0408, /**< No reply */
124 } connection_error_e;
131 * @addtogroup CAPI_NETWORK_CONNECTION_STATISTICS_MODULE
136 * @brief Enumerations of statistics type.
140 CONNECTION_STATISTICS_TYPE_LAST_RECEIVED_DATA = 0, /**< Last received data */
141 CONNECTION_STATISTICS_TYPE_LAST_SENT_DATA = 1, /**< Last sent data */
142 CONNECTION_STATISTICS_TYPE_TOTAL_RECEIVED_DATA = 2, /**< Total received data */
143 CONNECTION_STATISTICS_TYPE_TOTAL_SENT_DATA = 3, /**< Total sent data */
144 } connection_statistics_type_e;
151 * @addtogroup CAPI_NETWORK_CONNECTION_MANAGER_MODULE
157 * @brief Creates a handle for managing data connections.
158 * @remarks @a handle must be released with connection_destroy().
159 * @param[out] connection The handle of the connection
160 * @return 0 on success, otherwise negative error value.
161 * @retval #CONNECTION_ERROR_NONE Successful
162 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
163 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
164 * @see connection_destroy()
166 int connection_create(connection_h* connection);
169 * @brief Destroys the connection handle.
170 * @param[in] connection The handle of the connection
171 * @return 0 on success, otherwise negative error value.
172 * @retval #CONNECTION_ERROR_NONE Successful
173 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
174 * @see connection_create()
176 int connection_destroy(connection_h connection);
179 * @brief Called when the type of connection is changed.
180 * @param[in] type The type of current network connection
181 * @param[in] user_data The user data passed from the callback registration function
182 * @see connection_set_network_type_changed_cb()
183 * @see connection_unset_network_type_changed_cb()
185 typedef void(*connection_type_changed_cb)(connection_type_e type, void* user_data);
188 * @brief Called when the address is changed.
189 * @param[in] ipv4_address The IP address for IPv4
190 * @param[in] ipv6_address The IP address for IPv6
191 * @param[in] user_data The user data passed from the callback registration function
192 * @see connection_set_ip_address_changed_cb()
193 * @see connection_unset_ip_address_changed_cb()
194 * @see connection_set_proxy_address_changed_cb()
195 * @see connection_unset_proxy_address_changed_cb()
197 typedef void(*connection_address_changed_cb)(const char* ipv4_address, const char* ipv6_address, void* user_data);
200 * @brief Called after connection_set_default_cellular_service_profile_async() is completed.
201 * @param[in] result The result
202 * @param[in] user_data The user data passed from connection_open_profile()
203 * @pre connection_set_default_cellular_service_profile_async() will invoke this callback function.
204 * @see connection_set_default_cellular_service_profile_async()
206 typedef void(*connection_set_default_cb)(connection_error_e result, void* user_data);
209 * @brief Gets the type of the current profile for data connection.
210 * @param[in] connection The handle of the connection
211 * @param[out] state The state of network
212 * @return 0 on success, otherwise negative error value.
213 * @retval #CONNECTION_ERROR_NONE Successful
214 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
215 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
217 int connection_get_type(connection_h connection, connection_type_e* type);
220 * @brief Gets the IP address of the current connection.
221 * @remarks @a ip_address must be released with free() by you.
222 * @param[in] connection The handle of the connection
223 * @param[in] address_family The address family
224 * @param[out] ip_address The pointer to IP address string.
225 * @return 0 on success, otherwise negative error value.
226 * @retval #CONNECTION_ERROR_NONE Successful
227 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
228 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
229 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
231 int connection_get_ip_address(connection_h connection, connection_address_family_e address_family, char** ip_address);
234 * @brief Gets the proxy address of the current connection.
235 * @remarks @a proxy must be released with free() by you.
236 * @param[in] connection The handle of the connection
237 * @param[in] address_family The address family
238 * @param[out] proxy The proxy address
239 * @return 0 on success, otherwise negative error value.
240 * @retval #CONNECTION_ERROR_NONE Successful
241 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
242 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
243 * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family
245 int connection_get_proxy(connection_h connection, connection_address_family_e address_family, char** proxy);
248 * @brief Gets the state of celluar connection.
249 * @details The returned state is for the cellular connection state.
250 * @param[in] connection The handle of connection
251 * @param[out] state The state of cellular connection
252 * @return 0 on success, otherwise negative error value.
253 * @retval #CONNECTION_ERROR_NONE Successful
254 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
255 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
257 int connection_get_cellular_state(connection_h connection, connection_cellular_state_e* state);
260 * @brief Gets the state of Wi-Fi.
261 * @details The returned state is for the Wi-Fi connection state.
262 * @param[in] connection The handle of connection
263 * @param[out] state The state of Wi-Fi connection
264 * @return 0 on success, otherwise negative error value.
265 * @retval #CONNECTION_ERROR_NONE Successful
266 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
267 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
269 int connection_get_wifi_state(connection_h connection, connection_wifi_state_e* state);
272 * @brief Gets the state of ethernet.
273 * @details The returned state is for the ethernet connection state.
274 * @param[in] connection The handle of connection
275 * @param[out] state The state of Ethernet connection
276 * @return 0 on success, otherwise negative error value.
277 * @retval #CONNECTION_ERROR_NONE Successful
278 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
279 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
281 int connection_get_ethernet_state(connection_h connection, connection_ethernet_state_e* state);
284 * @brief Gets the state of Bluetooth.
285 * @details The returned state is for the Bluetooth connection state.
286 * @param[in] connection The handle of connection
287 * @param[out] state The state of Ethernet connection
288 * @return 0 on success, otherwise negative error value.
289 * @retval #CONNECTION_ERROR_NONE Successful
290 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
291 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
293 int connection_get_bt_state(connection_h connection, connection_bt_state_e* state);
296 * @brief Registers the callback called when the type of current connection is changed.
297 * @param[in] connection The handle of connection
298 * @param[in] callback The callback function to be called
299 * @param[in] user_data The user data passed to the callback function
300 * @return 0 on success, otherwise negative error value.
301 * @retval #CONNECTION_ERROR_NONE Successful
302 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
303 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
305 int connection_set_type_changed_cb(connection_h connection, connection_type_changed_cb callback, void* user_data);
308 * @brief Unregisters the callback called when the type of current connection is changed.
309 * @param[in] connection The handle of connection
310 * @return 0 on success, otherwise negative error value.
311 * @retval #CONNECTION_ERROR_NONE Successful
312 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
313 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
315 int connection_unset_type_changed_cb(connection_h connection);
318 * @brief Registers the callback called when the IP address is changed.
319 * @param[in] connection The handle of connection
320 * @param[in] callback The callback function to be called
321 * @param[in] user_data The user data passed to the callback function
322 * @return 0 on success, otherwise negative error value.
323 * @retval #CONNECTION_ERROR_NONE Successful
324 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
325 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
327 int connection_set_ip_address_changed_cb(connection_h connection, connection_address_changed_cb callback, void* user_data);
330 * @brief Unregisters the callback called when the IP address is changed.
331 * @param[in] connection The handle of connection
332 * @return 0 on success, otherwise negative error value.
333 * @retval #CONNECTION_ERROR_NONE Successful
334 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
335 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
337 int connection_unset_ip_address_changed_cb(connection_h connection);
340 * @brief Registers the callback called when the proxy address is changed.
341 * @param[in] connection The handle of connection
342 * @param[in] callback The callback function to be called
343 * @param[in] user_data The user data passed to the callback function
344 * @return 0 on success, otherwise negative error value.
345 * @retval #CONNECTION_ERROR_NONE Successful
346 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
347 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
349 int connection_set_proxy_address_changed_cb(connection_h connection, connection_address_changed_cb callback, void* user_data);
352 * @brief Unregisters the callback called when the proxy address is changed.
353 * @param[in] connection The handle of connection
354 * @return 0 on success, otherwise negative error value.
355 * @retval #CONNECTION_ERROR_NONE Successful
356 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
357 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
359 int connection_unset_proxy_address_changed_cb(connection_h connection);
362 * @brief Adds new profile which is created by connection_profile_created().
363 * @remarks You can only add a profile of cellular type.
364 * @param[in] connection The handle of connection
365 * @param[in] profile The handle of profile
366 * @return 0 on success, otherwise negative error value.
367 * @retval #CONNECTION_ERROR_NONE Successful
368 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
369 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
371 int connection_add_profile(connection_h connection, connection_profile_h profile);
374 * @brief Removes existing profile.
375 * @param[in] connection The handle of connection
376 * @param[in] profile The handle of profile
377 * @return 0 on success, otherwise negative error value.
378 * @retval #CONNECTION_ERROR_NONE Successful
379 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
380 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
382 int connection_remove_profile(connection_h connection, connection_profile_h profile);
385 * @brief Updates existing profile.
386 * @details If you change somethings of a profile, this changes will be not applied to the Connection Manager immediately.
387 * When you call this function, your changes affect the Connection Manager and the existing profile is updated.
388 * In addition, the existing profile will be updated if you call connection_open_profile().
389 * @param[in] connection The handle of connection
390 * @param[in] profile The handle of profile
391 * @return 0 on success, otherwise negative error value.
392 * @retval #CONNECTION_ERROR_NONE Successful
393 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
394 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
395 * @see connection_open_profile()
397 int connection_update_profile(connection_h connection, connection_profile_h profile);
400 * @brief Gets a iterator of the profiles.
401 * @remarks @a profile_iterator must be released with connection_destroy().
402 * @param[in] connection The handle of connection
403 * @param[in] type The type of connetion iterator
404 * @param[out] profile_iterator The iterator of profile
405 * @return 0 on success, otherwise negative error value.
406 * @retval #CONNECTION_ERROR_NONE Successful
407 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
408 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
409 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
411 int connection_get_profile_iterator(connection_h connection, connection_iterator_type_e type, connection_profile_iterator_h* profile_iterator);
414 * @brief Moves the profile iterator to the next position and gets a profile handle.
415 * @param[in] profile_iterator The iterator of profile
416 * @param[out] profile The handle of profile
417 * @return 0 on success, otherwise negative error value.
418 * @retval #CONNECTION_ERROR_NONE Successful
419 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
420 * @retval #CONNECTION_ERROR_ITERATOR_END End of iteration
422 int connection_profile_iterator_next(connection_profile_iterator_h profile_iterator, connection_profile_h* profile);
425 * @brief Checks whether the next element of profile iterator exists or not.
426 * @param[in] profile_iterator The iterator of profile
427 * @return @c true if next element exists, \n @c false if next element doesn't exist
429 bool connection_profile_iterator_has_next(connection_profile_iterator_h profile_iterator);
432 * @brief Destroys a iterator of the profiles.
433 * @param[in] profile_iterator The iterator of profile
434 * @return 0 on success, otherwise negative error value.
435 * @retval #CONNECTION_ERROR_NONE Successful
436 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
438 int connection_destroy_profile_iterator(connection_profile_iterator_h profile_iterator);
441 * @brief Gets the name of default profile.
442 * @remarks @a profile must be released with connection_profile_destroy().
443 * @param[in] connection The handle of connection
444 * @param[out] profile The handle of profile
445 * @return 0 on success, otherwise negative error value.
446 * @retval #CONNECTION_ERROR_NONE Successful
447 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
448 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
449 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
450 * @retval #CONNECTION_ERROR_NO_CONNECTION There is no connection
452 int connection_get_current_profile(connection_h connection, connection_profile_h* profile);
455 * @brief Gets the default profile which provides the given cellular service.
456 * @remarks @a profile must be released with connection_profile_destroy().
457 * @param[in] connection The handle of connection
458 * @param[in] type The type of cellular service. #CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION is not permitted
459 * @param[out] profile The handle of profile
460 * @return 0 on success, otherwise negative error value.
461 * @retval #CONNECTION_ERROR_NONE Successful
462 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
463 * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory
464 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
466 int connection_get_default_cellular_service_profile(connection_h connection, connection_cellular_service_type_e type, connection_profile_h* profile);
469 * @brief Sets the default profile which provides the given cellular service.
470 * @param[in] connection The handle of connection
471 * @param[in] type The type of cellular service.
472 * #CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET and #CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET are only permitted.
473 * @param[in] profile The handle of profile
474 * @return 0 on success, otherwise negative error value.
475 * @retval #CONNECTION_ERROR_NONE Successful
476 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
477 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
479 int connection_set_default_cellular_service_profile(connection_h connection, connection_cellular_service_type_e type, connection_profile_h profile);
482 * @brief Sets the default profile which provides the given cellular service, asynchronously.
483 * @param[in] connection The handle of connection
484 * @param[in] type The type of cellular service.
485 * #CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET and #CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET are only permitted.
486 * @param[in] profile The handle of profile
487 * @param[in] callback The callback function to be called
488 * @param[in] user_data The user data passed to the callback function
489 * @return 0 on success, otherwise negative error value.
490 * @retval #CONNECTION_ERROR_NONE Successful
491 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
492 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
494 int connection_set_default_cellular_service_profile_async(connection_h connection,
495 connection_cellular_service_type_e type, connection_profile_h profile, connection_set_default_cb callback, void* user_data);
498 * @brief Called after connection_open_profile() is completed.
499 * @param[in] result The result
500 * @param[in] user_data The user data passed from connection_open_profile()
501 * @pre connection_open_profile() will invoke this callback function.
502 * @see connection_open_profile()
504 typedef void(*connection_opened_cb)(connection_error_e result, void* user_data);
507 * @brief Called after connection_close_profile() is completed.
508 * @param[in] result The result
509 * @param[in] user_data The user data passed from connection_close_profile()
510 * @pre connection_close_profile() will invoke this callback function.
511 * @see connection_close_profile()
513 typedef void(*connection_closed_cb)(connection_error_e result, void* user_data);
516 * @brief Opens a connection of profile, asynchronously.
517 * @param[in] connection The handle of connection
518 * @param[in] profile The handle of profile
519 * @param[in] callback The callback function to be called
520 * @param[in] user_data The user data passed to the callback function
521 * @return 0 on success, otherwise negative error value.
522 * @retval #CONNECTION_ERROR_NONE Successful
523 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
524 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
525 * @post connection_opened_cb() will be invoked.
526 * @see connection_opened_cb()
527 * @see connection_close_profile()
528 * @see connection_profile_set_state_changed_cb()
529 * @see connection_profile_unset_state_changed_cb()
530 * @see connection_profile_state_changed_cb()
532 int connection_open_profile(connection_h connection, connection_profile_h profile, connection_opened_cb callback, void* user_data);
535 * @brief Closes a connection of profile.
536 * @param[in] connection The handle of connection
537 * @param[in] profile The handle of profile
538 * @param[in] callback The callback function to be called
539 * @param[in] user_data The user data passed to the callback function
540 * @return 0 on success, otherwise negative error value.
541 * @retval #CONNECTION_ERROR_NONE Successful
542 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
543 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
544 * @post connection_closed_cb() will be invoked.
545 * @see connection_closed_cb()
546 * @see connection_open_profile()
547 * @see connection_profile_set_state_changed_cb()
548 * @see connection_profile_unset_state_changed_cb()
549 * @see connection_profile_state_changed_cb()
551 int connection_close_profile(connection_h connection, connection_profile_h profile, connection_closed_cb callback, void* user_data);
554 * @brief Add a route to routing table.
555 * @details You can get the @a interface_name from connection_profile_get_network_interface_name() of opened profile.
556 * @param[in] connection The handle of connection
557 * @param[in] interface_name The name of network interface
558 * @param[in] host_address The IP address of the host
559 * @return 0 on success, otherwise negative error value.
560 * @retval #CONNECTION_ERROR_NONE Successful
561 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
562 * @retval #CONNECTION_ERROR_ALREADY_EXISTS Already exists
563 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
564 * @see connection_profile_get_network_interface_name()
566 int connection_add_route(connection_h connection, const char* interface_name, const char* host_address);
573 * @addtogroup CAPI_NETWORK_CONNECTION_STATISTICS_MODULE
578 * @brief Gets the statistics information.
579 * @param[in] connection_type The type of connection. CONNECTION_TYPE_WIFI and CONNECTION_TYPE_CELLULAR are only supported.
580 * @param[in] statistics_type The type of statistics
581 * @param[out] size The received data size of the last cellular packet data connection (bytes)
582 * @return 0 on success, otherwise negative error value.
583 * @retval #CONNECTION_ERROR_NONE Successful
584 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
585 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
587 int connection_get_statistics(connection_type_e connection_type, connection_statistics_type_e statistics_type, long long* size);
590 * @brief Resets the statistics information
591 * @param[in] connection_type The type of connection. CONNECTION_TYPE_WIFI and CONNECTION_TYPE_CELLULAR are only supported.
592 * @param[in] statistics_type The type of statistics
593 * @return 0 on success, otherwise negative error value.
594 * @retval #CONNECTION_ERROR_NONE Successful
595 * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter
596 * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed
598 int connection_reset_statistics(connection_type_e connection_type, connection_statistics_type_e statistics_type);
607 #endif /* __cplusplus */