rpi: limit size of the RAM to the multiple of the MMU_SECTION_SIZE
[platform/kernel/u-boot.git] / include / net.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  *      LiMon Monitor (LiMon) - Network.
4  *
5  *      Copyright 1994 - 2000 Neil Russell.
6  *      (See License)
7  *
8  * History
9  *      9/16/00   bor  adapted to TQM823L/STK8xxL board, RARP/TFTP boot added
10  */
11
12 #ifndef __NET_H__
13 #define __NET_H__
14
15 #include <linux/types.h>
16 #include <asm/cache.h>
17 #include <asm/byteorder.h>      /* for nton* / ntoh* stuff */
18 #include <env.h>
19 #include <log.h>
20 #include <time.h>
21 #include <linux/if_ether.h>
22 #include <rand.h>
23
24 struct bd_info;
25 struct cmd_tbl;
26 struct udevice;
27
28 #define DEBUG_LL_STATE 0        /* Link local state machine changes */
29 #define DEBUG_DEV_PKT 0         /* Packets or info directed to the device */
30 #define DEBUG_NET_PKT 0         /* Packets on info on the network at large */
31 #define DEBUG_INT_STATE 0       /* Internal network state changes */
32
33 /*
34  *      The number of receive packet buffers, and the required packet buffer
35  *      alignment in memory.
36  *
37  */
38
39 #ifdef CONFIG_SYS_RX_ETH_BUFFER
40 # define PKTBUFSRX      CONFIG_SYS_RX_ETH_BUFFER
41 #else
42 # define PKTBUFSRX      4
43 #endif
44
45 #define PKTALIGN        ARCH_DMA_MINALIGN
46
47 /* ARP hardware address length */
48 #define ARP_HLEN 6
49 /*
50  * The size of a MAC address in string form, each digit requires two chars
51  * and five separator characters to form '00:00:00:00:00:00'.
52  */
53 #define ARP_HLEN_ASCII (ARP_HLEN * 2) + (ARP_HLEN - 1)
54
55 /* IPv4 addresses are always 32 bits in size */
56 struct in_addr {
57         __be32 s_addr;
58 };
59
60 /**
61  * do_tftpb - Run the tftpboot command
62  *
63  * @cmdtp: Command information for tftpboot
64  * @flag: Command flags (CMD_FLAG_...)
65  * @argc: Number of arguments
66  * @argv: List of arguments
67  * @return result (see enum command_ret_t)
68  */
69 int do_tftpb(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
70
71 /**
72  * An incoming packet handler.
73  * @param pkt    pointer to the application packet
74  * @param dport  destination UDP port
75  * @param sip    source IP address
76  * @param sport  source UDP port
77  * @param len    packet length
78  */
79 typedef void rxhand_f(uchar *pkt, unsigned dport,
80                       struct in_addr sip, unsigned sport,
81                       unsigned len);
82
83 /**
84  * An incoming ICMP packet handler.
85  * @param type  ICMP type
86  * @param code  ICMP code
87  * @param dport destination UDP port
88  * @param sip   source IP address
89  * @param sport source UDP port
90  * @param pkt   pointer to the ICMP packet data
91  * @param len   packet length
92  */
93 typedef void rxhand_icmp_f(unsigned type, unsigned code, unsigned dport,
94                 struct in_addr sip, unsigned sport, uchar *pkt, unsigned len);
95
96 /*
97  *      A timeout handler.  Called after time interval has expired.
98  */
99 typedef void    thand_f(void);
100
101 enum eth_state_t {
102         ETH_STATE_INIT,
103         ETH_STATE_PASSIVE,
104         ETH_STATE_ACTIVE
105 };
106
107 #ifdef CONFIG_DM_ETH
108 /**
109  * struct eth_pdata - Platform data for Ethernet MAC controllers
110  *
111  * @iobase: The base address of the hardware registers
112  * @enetaddr: The Ethernet MAC address that is loaded from EEPROM or env
113  * @phy_interface: PHY interface to use - see PHY_INTERFACE_MODE_...
114  * @max_speed: Maximum speed of Ethernet connection supported by MAC
115  * @priv_pdata: device specific platdata
116  */
117 struct eth_pdata {
118         phys_addr_t iobase;
119         unsigned char enetaddr[ARP_HLEN];
120         int phy_interface;
121         int max_speed;
122         void *priv_pdata;
123 };
124
125 enum eth_recv_flags {
126         /*
127          * Check hardware device for new packets (otherwise only return those
128          * which are already in the memory buffer ready to process)
129          */
130         ETH_RECV_CHECK_DEVICE           = 1 << 0,
131 };
132
133 /**
134  * struct eth_ops - functions of Ethernet MAC controllers
135  *
136  * start: Prepare the hardware to send and receive packets
137  * send: Send the bytes passed in "packet" as a packet on the wire
138  * recv: Check if the hardware received a packet. If so, set the pointer to the
139  *       packet buffer in the packetp parameter. If not, return an error or 0 to
140  *       indicate that the hardware receive FIFO is empty. If 0 is returned, the
141  *       network stack will not process the empty packet, but free_pkt() will be
142  *       called if supplied
143  * free_pkt: Give the driver an opportunity to manage its packet buffer memory
144  *           when the network stack is finished processing it. This will only be
145  *           called when no error was returned from recv - optional
146  * stop: Stop the hardware from looking for packets - may be called even if
147  *       state == PASSIVE
148  * mcast: Join or leave a multicast group (for TFTP) - optional
149  * write_hwaddr: Write a MAC address to the hardware (used to pass it to Linux
150  *               on some platforms like ARM). This function expects the
151  *               eth_pdata::enetaddr field to be populated. The method can
152  *               return -ENOSYS to indicate that this is not implemented for
153                  this hardware - optional.
154  * read_rom_hwaddr: Some devices have a backup of the MAC address stored in a
155  *                  ROM on the board. This is how the driver should expose it
156  *                  to the network stack. This function should fill in the
157  *                  eth_pdata::enetaddr field - optional
158  */
159 struct eth_ops {
160         int (*start)(struct udevice *dev);
161         int (*send)(struct udevice *dev, void *packet, int length);
162         int (*recv)(struct udevice *dev, int flags, uchar **packetp);
163         int (*free_pkt)(struct udevice *dev, uchar *packet, int length);
164         void (*stop)(struct udevice *dev);
165         int (*mcast)(struct udevice *dev, const u8 *enetaddr, int join);
166         int (*write_hwaddr)(struct udevice *dev);
167         int (*read_rom_hwaddr)(struct udevice *dev);
168 };
169
170 #define eth_get_ops(dev) ((struct eth_ops *)(dev)->driver->ops)
171
172 struct udevice *eth_get_dev(void); /* get the current device */
173 /*
174  * The devname can be either an exact name given by the driver or device tree
175  * or it can be an alias of the form "eth%d"
176  */
177 struct udevice *eth_get_dev_by_name(const char *devname);
178 unsigned char *eth_get_ethaddr(void); /* get the current device MAC */
179
180 /* Used only when NetConsole is enabled */
181 int eth_is_active(struct udevice *dev); /* Test device for active state */
182 int eth_init_state_only(void); /* Set active state */
183 void eth_halt_state_only(void); /* Set passive state */
184 #endif
185
186 #ifndef CONFIG_DM_ETH
187 struct eth_device {
188 #define ETH_NAME_LEN 20
189         char name[ETH_NAME_LEN];
190         unsigned char enetaddr[ARP_HLEN];
191         phys_addr_t iobase;
192         int state;
193
194         int (*init)(struct eth_device *eth, struct bd_info *bd);
195         int (*send)(struct eth_device *, void *packet, int length);
196         int (*recv)(struct eth_device *);
197         void (*halt)(struct eth_device *);
198         int (*mcast)(struct eth_device *, const u8 *enetaddr, int join);
199         int (*write_hwaddr)(struct eth_device *eth);
200         struct eth_device *next;
201         int index;
202         void *priv;
203 };
204
205 int eth_register(struct eth_device *dev);/* Register network device */
206 int eth_unregister(struct eth_device *dev);/* Remove network device */
207
208 extern struct eth_device *eth_current;
209
210 static __always_inline struct eth_device *eth_get_dev(void)
211 {
212         return eth_current;
213 }
214 struct eth_device *eth_get_dev_by_name(const char *devname);
215 struct eth_device *eth_get_dev_by_index(int index); /* get dev @ index */
216
217 /* get the current device MAC */
218 static inline unsigned char *eth_get_ethaddr(void)
219 {
220         if (eth_current)
221                 return eth_current->enetaddr;
222         return NULL;
223 }
224
225 /* Used only when NetConsole is enabled */
226 int eth_is_active(struct eth_device *dev); /* Test device for active state */
227 /* Set active state */
228 static __always_inline int eth_init_state_only(void)
229 {
230         eth_get_dev()->state = ETH_STATE_ACTIVE;
231
232         return 0;
233 }
234 /* Set passive state */
235 static __always_inline void eth_halt_state_only(void)
236 {
237         eth_get_dev()->state = ETH_STATE_PASSIVE;
238 }
239
240 /*
241  * Set the hardware address for an ethernet interface based on 'eth%daddr'
242  * environment variable (or just 'ethaddr' if eth_number is 0).
243  * Args:
244  *      base_name - base name for device (normally "eth")
245  *      eth_number - value of %d (0 for first device of this type)
246  * Returns:
247  *      0 is success, non-zero is error status from driver.
248  */
249 int eth_write_hwaddr(struct eth_device *dev, const char *base_name,
250                      int eth_number);
251
252 int usb_eth_initialize(struct bd_info *bi);
253 #endif
254
255 int eth_initialize(void);               /* Initialize network subsystem */
256 void eth_try_another(int first_restart);        /* Change the device */
257 void eth_set_current(void);             /* set nterface to ethcur var */
258
259 int eth_get_dev_index(void);            /* get the device index */
260
261 /**
262  * eth_env_set_enetaddr_by_index() - set the MAC address environment variable
263  *
264  * This sets up an environment variable with the given MAC address (@enetaddr).
265  * The environment variable to be set is defined by <@base_name><@index>addr.
266  * If @index is 0 it is omitted. For common Ethernet this means ethaddr,
267  * eth1addr, etc.
268  *
269  * @base_name:  Base name for variable, typically "eth"
270  * @index:      Index of interface being updated (>=0)
271  * @enetaddr:   Pointer to MAC address to put into the variable
272  * @return 0 if OK, other value on error
273  */
274 int eth_env_set_enetaddr_by_index(const char *base_name, int index,
275                                  uchar *enetaddr);
276
277
278 /*
279  * Initialize USB ethernet device with CONFIG_DM_ETH
280  * Returns:
281  *      0 is success, non-zero is error status.
282  */
283 int usb_ether_init(void);
284
285 /*
286  * Get the hardware address for an ethernet interface .
287  * Args:
288  *      base_name - base name for device (normally "eth")
289  *      index - device index number (0 for first)
290  *      enetaddr - returns 6 byte hardware address
291  * Returns:
292  *      Return true if the address is valid.
293  */
294 int eth_env_get_enetaddr_by_index(const char *base_name, int index,
295                                  uchar *enetaddr);
296
297 int eth_init(void);                     /* Initialize the device */
298 int eth_send(void *packet, int length);    /* Send a packet */
299
300 #if defined(CONFIG_API) || defined(CONFIG_EFI_LOADER)
301 int eth_receive(void *packet, int length); /* Receive a packet*/
302 extern void (*push_packet)(void *packet, int length);
303 #endif
304 int eth_rx(void);                       /* Check for received packets */
305 void eth_halt(void);                    /* stop SCC */
306 const char *eth_get_name(void);         /* get name of current device */
307 int eth_mcast_join(struct in_addr mcast_addr, int join);
308
309 /**********************************************************************/
310 /*
311  *      Protocol headers.
312  */
313
314 /*
315  *      Ethernet header
316  */
317
318 struct ethernet_hdr {
319         u8              et_dest[ARP_HLEN];      /* Destination node     */
320         u8              et_src[ARP_HLEN];       /* Source node          */
321         u16             et_protlen;             /* Protocol or length   */
322 } __attribute__((packed));
323
324 /* Ethernet header size */
325 #define ETHER_HDR_SIZE  (sizeof(struct ethernet_hdr))
326
327 #define ETH_FCS_LEN     4               /* Octets in the FCS            */
328
329 struct e802_hdr {
330         u8              et_dest[ARP_HLEN];      /* Destination node     */
331         u8              et_src[ARP_HLEN];       /* Source node          */
332         u16             et_protlen;             /* Protocol or length   */
333         u8              et_dsap;                /* 802 DSAP             */
334         u8              et_ssap;                /* 802 SSAP             */
335         u8              et_ctl;                 /* 802 control          */
336         u8              et_snap1;               /* SNAP                 */
337         u8              et_snap2;
338         u8              et_snap3;
339         u16             et_prot;                /* 802 protocol         */
340 } __attribute__((packed));
341
342 /* 802 + SNAP + ethernet header size */
343 #define E802_HDR_SIZE   (sizeof(struct e802_hdr))
344
345 /*
346  *      Virtual LAN Ethernet header
347  */
348 struct vlan_ethernet_hdr {
349         u8              vet_dest[ARP_HLEN];     /* Destination node     */
350         u8              vet_src[ARP_HLEN];      /* Source node          */
351         u16             vet_vlan_type;          /* PROT_VLAN            */
352         u16             vet_tag;                /* TAG of VLAN          */
353         u16             vet_type;               /* protocol type        */
354 } __attribute__((packed));
355
356 /* VLAN Ethernet header size */
357 #define VLAN_ETHER_HDR_SIZE     (sizeof(struct vlan_ethernet_hdr))
358
359 #define PROT_IP         0x0800          /* IP protocol                  */
360 #define PROT_ARP        0x0806          /* IP ARP protocol              */
361 #define PROT_WOL        0x0842          /* ether-wake WoL protocol      */
362 #define PROT_RARP       0x8035          /* IP ARP protocol              */
363 #define PROT_VLAN       0x8100          /* IEEE 802.1q protocol         */
364 #define PROT_IPV6       0x86dd          /* IPv6 over bluebook           */
365 #define PROT_PPP_SES    0x8864          /* PPPoE session messages       */
366 #define PROT_NCSI       0x88f8          /* NC-SI control packets        */
367
368 #define IPPROTO_ICMP     1      /* Internet Control Message Protocol    */
369 #define IPPROTO_UDP     17      /* User Datagram Protocol               */
370
371 /*
372  *      Internet Protocol (IP) header.
373  */
374 struct ip_hdr {
375         u8              ip_hl_v;        /* header length and version    */
376         u8              ip_tos;         /* type of service              */
377         u16             ip_len;         /* total length                 */
378         u16             ip_id;          /* identification               */
379         u16             ip_off;         /* fragment offset field        */
380         u8              ip_ttl;         /* time to live                 */
381         u8              ip_p;           /* protocol                     */
382         u16             ip_sum;         /* checksum                     */
383         struct in_addr  ip_src;         /* Source IP address            */
384         struct in_addr  ip_dst;         /* Destination IP address       */
385 } __attribute__((packed));
386
387 #define IP_OFFS         0x1fff /* ip offset *= 8 */
388 #define IP_FLAGS        0xe000 /* first 3 bits */
389 #define IP_FLAGS_RES    0x8000 /* reserved */
390 #define IP_FLAGS_DFRAG  0x4000 /* don't fragments */
391 #define IP_FLAGS_MFRAG  0x2000 /* more fragments */
392
393 #define IP_HDR_SIZE             (sizeof(struct ip_hdr))
394
395 /*
396  *      Internet Protocol (IP) + UDP header.
397  */
398 struct ip_udp_hdr {
399         u8              ip_hl_v;        /* header length and version    */
400         u8              ip_tos;         /* type of service              */
401         u16             ip_len;         /* total length                 */
402         u16             ip_id;          /* identification               */
403         u16             ip_off;         /* fragment offset field        */
404         u8              ip_ttl;         /* time to live                 */
405         u8              ip_p;           /* protocol                     */
406         u16             ip_sum;         /* checksum                     */
407         struct in_addr  ip_src;         /* Source IP address            */
408         struct in_addr  ip_dst;         /* Destination IP address       */
409         u16             udp_src;        /* UDP source port              */
410         u16             udp_dst;        /* UDP destination port         */
411         u16             udp_len;        /* Length of UDP packet         */
412         u16             udp_xsum;       /* Checksum                     */
413 } __attribute__((packed));
414
415 #define IP_UDP_HDR_SIZE         (sizeof(struct ip_udp_hdr))
416 #define UDP_HDR_SIZE            (IP_UDP_HDR_SIZE - IP_HDR_SIZE)
417
418 /*
419  *      Address Resolution Protocol (ARP) header.
420  */
421 struct arp_hdr {
422         u16             ar_hrd;         /* Format of hardware address   */
423 #   define ARP_ETHER        1           /* Ethernet  hardware address   */
424         u16             ar_pro;         /* Format of protocol address   */
425         u8              ar_hln;         /* Length of hardware address   */
426         u8              ar_pln;         /* Length of protocol address   */
427 #   define ARP_PLEN     4
428         u16             ar_op;          /* Operation                    */
429 #   define ARPOP_REQUEST    1           /* Request  to resolve  address */
430 #   define ARPOP_REPLY      2           /* Response to previous request */
431
432 #   define RARPOP_REQUEST   3           /* Request  to resolve  address */
433 #   define RARPOP_REPLY     4           /* Response to previous request */
434
435         /*
436          * The remaining fields are variable in size, according to
437          * the sizes above, and are defined as appropriate for
438          * specific hardware/protocol combinations.
439          */
440         u8              ar_data[0];
441 #define ar_sha          ar_data[0]
442 #define ar_spa          ar_data[ARP_HLEN]
443 #define ar_tha          ar_data[ARP_HLEN + ARP_PLEN]
444 #define ar_tpa          ar_data[ARP_HLEN + ARP_PLEN + ARP_HLEN]
445 #if 0
446         u8              ar_sha[];       /* Sender hardware address      */
447         u8              ar_spa[];       /* Sender protocol address      */
448         u8              ar_tha[];       /* Target hardware address      */
449         u8              ar_tpa[];       /* Target protocol address      */
450 #endif /* 0 */
451 } __attribute__((packed));
452
453 #define ARP_HDR_SIZE    (8+20)          /* Size assuming ethernet       */
454
455 /*
456  * ICMP stuff (just enough to handle (host) redirect messages)
457  */
458 #define ICMP_ECHO_REPLY         0       /* Echo reply                   */
459 #define ICMP_NOT_REACH          3       /* Detination unreachable       */
460 #define ICMP_REDIRECT           5       /* Redirect (change route)      */
461 #define ICMP_ECHO_REQUEST       8       /* Echo request                 */
462
463 /* Codes for REDIRECT. */
464 #define ICMP_REDIR_NET          0       /* Redirect Net                 */
465 #define ICMP_REDIR_HOST         1       /* Redirect Host                */
466
467 /* Codes for NOT_REACH */
468 #define ICMP_NOT_REACH_PORT     3       /* Port unreachable             */
469
470 struct icmp_hdr {
471         u8              type;
472         u8              code;
473         u16             checksum;
474         union {
475                 struct {
476                         u16     id;
477                         u16     sequence;
478                 } echo;
479                 u32     gateway;
480                 struct {
481                         u16     unused;
482                         u16     mtu;
483                 } frag;
484                 u8 data[0];
485         } un;
486 } __attribute__((packed));
487
488 #define ICMP_HDR_SIZE           (sizeof(struct icmp_hdr))
489 #define IP_ICMP_HDR_SIZE        (IP_HDR_SIZE + ICMP_HDR_SIZE)
490
491 /*
492  * Maximum packet size; used to allocate packet storage. Use
493  * the maxium Ethernet frame size as specified by the Ethernet
494  * standard including the 802.1Q tag (VLAN tagging).
495  * maximum packet size =  1522
496  * maximum packet size and multiple of 32 bytes =  1536
497  */
498 #define PKTSIZE                 1522
499 #define PKTSIZE_ALIGN           1536
500
501 /*
502  * Maximum receive ring size; that is, the number of packets
503  * we can buffer before overflow happens. Basically, this just
504  * needs to be enough to prevent a packet being discarded while
505  * we are processing the previous one.
506  */
507 #define RINGSZ          4
508 #define RINGSZ_LOG2     2
509
510 /**********************************************************************/
511 /*
512  *      Globals.
513  *
514  * Note:
515  *
516  * All variables of type struct in_addr are stored in NETWORK byte order
517  * (big endian).
518  */
519
520 /* net.c */
521 /** BOOTP EXTENTIONS **/
522 extern struct in_addr net_gateway;      /* Our gateway IP address */
523 extern struct in_addr net_netmask;      /* Our subnet mask (0 = unknown) */
524 /* Our Domain Name Server (0 = unknown) */
525 extern struct in_addr net_dns_server;
526 #if defined(CONFIG_BOOTP_DNS2)
527 /* Our 2nd Domain Name Server (0 = unknown) */
528 extern struct in_addr net_dns_server2;
529 #endif
530 extern char     net_nis_domain[32];     /* Our IS domain */
531 extern char     net_hostname[32];       /* Our hostname */
532 extern char     net_root_path[64];      /* Our root path */
533 /** END OF BOOTP EXTENTIONS **/
534 extern u8               net_ethaddr[ARP_HLEN];          /* Our ethernet address */
535 extern u8               net_server_ethaddr[ARP_HLEN];   /* Boot server enet address */
536 extern struct in_addr   net_ip;         /* Our    IP addr (0 = unknown) */
537 extern struct in_addr   net_server_ip;  /* Server IP addr (0 = unknown) */
538 extern uchar            *net_tx_packet;         /* THE transmit packet */
539 extern uchar            *net_rx_packets[PKTBUFSRX]; /* Receive packets */
540 extern uchar            *net_rx_packet;         /* Current receive packet */
541 extern int              net_rx_packet_len;      /* Current rx packet length */
542 extern const u8         net_bcast_ethaddr[ARP_HLEN];    /* Ethernet broadcast address */
543 extern const u8         net_null_ethaddr[ARP_HLEN];
544
545 #define VLAN_NONE       4095                    /* untagged */
546 #define VLAN_IDMASK     0x0fff                  /* mask of valid vlan id */
547 extern ushort           net_our_vlan;           /* Our VLAN */
548 extern ushort           net_native_vlan;        /* Our Native VLAN */
549
550 extern int              net_restart_wrap;       /* Tried all network devices */
551
552 enum proto_t {
553         BOOTP, RARP, ARP, TFTPGET, DHCP, PING, DNS, NFS, CDP, NETCONS, SNTP,
554         TFTPSRV, TFTPPUT, LINKLOCAL, FASTBOOT, WOL
555 };
556
557 extern char     net_boot_file_name[1024];/* Boot File name */
558 /* Indicates whether the file name was specified on the command line */
559 extern bool     net_boot_file_name_explicit;
560 /* The actual transferred size of the bootfile (in bytes) */
561 extern u32      net_boot_file_size;
562
563 /* Offset/size for partial downloads for nfsdown tool */
564 extern u32      net_boot_file_size_limit;
565 extern u32      net_boot_file_offset;
566 extern int netboot_nfs(unsigned long addr, const char *filename,
567                 unsigned long offset, unsigned long size);
568
569 /* Boot file size in blocks as reported by the DHCP server */
570 extern u32      net_boot_file_expected_size_in_blocks;
571
572 #if defined(CONFIG_CMD_DNS)
573 extern char *net_dns_resolve;           /* The host to resolve  */
574 extern char *net_dns_env_var;           /* the env var to put the ip into */
575 #endif
576
577 #if defined(CONFIG_CMD_PING)
578 extern struct in_addr net_ping_ip;      /* the ip address to ping */
579 #endif
580
581 #if defined(CONFIG_CMD_CDP)
582 /* when CDP completes these hold the return values */
583 extern ushort cdp_native_vlan;          /* CDP returned native VLAN */
584 extern ushort cdp_appliance_vlan;       /* CDP returned appliance VLAN */
585
586 /*
587  * Check for a CDP packet by examining the received MAC address field
588  */
589 static inline int is_cdp_packet(const uchar *ethaddr)
590 {
591         extern const u8 net_cdp_ethaddr[ARP_HLEN];
592
593         return memcmp(ethaddr, net_cdp_ethaddr, ARP_HLEN) == 0;
594 }
595 #endif
596
597 #if defined(CONFIG_CMD_SNTP)
598 extern struct in_addr   net_ntp_server;         /* the ip address to NTP */
599 extern int net_ntp_time_offset;                 /* offset time from UTC */
600 #endif
601
602 /* Initialize the network adapter */
603 void net_init(void);
604 int net_loop(enum proto_t);
605
606 /* Load failed.  Start again. */
607 int net_start_again(void);
608
609 /* Get size of the ethernet header when we send */
610 int net_eth_hdr_size(void);
611
612 /* Set ethernet header; returns the size of the header */
613 int net_set_ether(uchar *xet, const uchar *dest_ethaddr, uint prot);
614 int net_update_ether(struct ethernet_hdr *et, uchar *addr, uint prot);
615
616 /* Set IP header */
617 void net_set_ip_header(uchar *pkt, struct in_addr dest, struct in_addr source,
618                        u16 pkt_len, u8 proto);
619 void net_set_udp_header(uchar *pkt, struct in_addr dest, int dport,
620                                 int sport, int len);
621
622 /**
623  * compute_ip_checksum() - Compute IP checksum
624  *
625  * @addr:       Address to check (must be 16-bit aligned)
626  * @nbytes:     Number of bytes to check (normally a multiple of 2)
627  * @return 16-bit IP checksum
628  */
629 unsigned compute_ip_checksum(const void *addr, unsigned nbytes);
630
631 /**
632  * add_ip_checksums() - add two IP checksums
633  *
634  * @offset:     Offset of first sum (if odd we do a byte-swap)
635  * @sum:        First checksum
636  * @new_sum:    New checksum to add
637  * @return updated 16-bit IP checksum
638  */
639 unsigned add_ip_checksums(unsigned offset, unsigned sum, unsigned new_sum);
640
641 /**
642  * ip_checksum_ok() - check if a checksum is correct
643  *
644  * This works by making sure the checksum sums to 0
645  *
646  * @addr:       Address to check (must be 16-bit aligned)
647  * @nbytes:     Number of bytes to check (normally a multiple of 2)
648  * @return true if the checksum matches, false if not
649  */
650 int ip_checksum_ok(const void *addr, unsigned nbytes);
651
652 /* Callbacks */
653 rxhand_f *net_get_udp_handler(void);    /* Get UDP RX packet handler */
654 void net_set_udp_handler(rxhand_f *);   /* Set UDP RX packet handler */
655 rxhand_f *net_get_arp_handler(void);    /* Get ARP RX packet handler */
656 void net_set_arp_handler(rxhand_f *);   /* Set ARP RX packet handler */
657 bool arp_is_waiting(void);              /* Waiting for ARP reply? */
658 void net_set_icmp_handler(rxhand_icmp_f *f); /* Set ICMP RX handler */
659 void net_set_timeout_handler(ulong, thand_f *);/* Set timeout handler */
660
661 /* Network loop state */
662 enum net_loop_state {
663         NETLOOP_CONTINUE,
664         NETLOOP_RESTART,
665         NETLOOP_SUCCESS,
666         NETLOOP_FAIL
667 };
668 extern enum net_loop_state net_state;
669
670 static inline void net_set_state(enum net_loop_state state)
671 {
672         debug_cond(DEBUG_INT_STATE, "--- NetState set to %d\n", state);
673         net_state = state;
674 }
675
676 /*
677  * net_get_async_tx_pkt_buf - Get a packet buffer that is not in use for
678  *                            sending an asynchronous reply
679  *
680  * returns - ptr to packet buffer
681  */
682 uchar * net_get_async_tx_pkt_buf(void);
683
684 /* Transmit a packet */
685 static inline void net_send_packet(uchar *pkt, int len)
686 {
687         /* Currently no way to return errors from eth_send() */
688         (void) eth_send(pkt, len);
689 }
690
691 /*
692  * Transmit "net_tx_packet" as UDP packet, performing ARP request if needed
693  *  (ether will be populated)
694  *
695  * @param ether Raw packet buffer
696  * @param dest IP address to send the datagram to
697  * @param dport Destination UDP port
698  * @param sport Source UDP port
699  * @param payload_len Length of data after the UDP header
700  */
701 int net_send_ip_packet(uchar *ether, struct in_addr dest, int dport, int sport,
702                        int payload_len, int proto, u8 action, u32 tcp_seq_num,
703                        u32 tcp_ack_num);
704 int net_send_udp_packet(uchar *ether, struct in_addr dest, int dport,
705                         int sport, int payload_len);
706
707 /* Processes a received packet */
708 void net_process_received_packet(uchar *in_packet, int len);
709
710 #if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD)
711 void nc_start(void);
712 int nc_input_packet(uchar *pkt, struct in_addr src_ip, unsigned dest_port,
713         unsigned src_port, unsigned len);
714 #endif
715
716 static __always_inline int eth_is_on_demand_init(void)
717 {
718 #if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD)
719         extern enum proto_t net_loop_last_protocol;
720
721         return net_loop_last_protocol != NETCONS;
722 #else
723         return 1;
724 #endif
725 }
726
727 static inline void eth_set_last_protocol(int protocol)
728 {
729 #if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD)
730         extern enum proto_t net_loop_last_protocol;
731
732         net_loop_last_protocol = protocol;
733 #endif
734 }
735
736 /*
737  * Check if autoload is enabled. If so, use either NFS or TFTP to download
738  * the boot file.
739  */
740 void net_auto_load(void);
741
742 /*
743  * The following functions are a bit ugly, but necessary to deal with
744  * alignment restrictions on ARM.
745  *
746  * We're using inline functions, which had the smallest memory
747  * footprint in our tests.
748  */
749 /* return IP *in network byteorder* */
750 static inline struct in_addr net_read_ip(void *from)
751 {
752         struct in_addr ip;
753
754         memcpy((void *)&ip, (void *)from, sizeof(ip));
755         return ip;
756 }
757
758 /* return ulong *in network byteorder* */
759 static inline u32 net_read_u32(void *from)
760 {
761         u32 l;
762
763         memcpy((void *)&l, (void *)from, sizeof(l));
764         return l;
765 }
766
767 /* write IP *in network byteorder* */
768 static inline void net_write_ip(void *to, struct in_addr ip)
769 {
770         memcpy(to, (void *)&ip, sizeof(ip));
771 }
772
773 /* copy IP */
774 static inline void net_copy_ip(void *to, void *from)
775 {
776         memcpy((void *)to, from, sizeof(struct in_addr));
777 }
778
779 /* copy ulong */
780 static inline void net_copy_u32(void *to, void *from)
781 {
782         memcpy((void *)to, (void *)from, sizeof(u32));
783 }
784
785 /**
786  * is_zero_ethaddr - Determine if give Ethernet address is all zeros.
787  * @addr: Pointer to a six-byte array containing the Ethernet address
788  *
789  * Return true if the address is all zeroes.
790  */
791 static inline int is_zero_ethaddr(const u8 *addr)
792 {
793         return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]);
794 }
795
796 /**
797  * is_multicast_ethaddr - Determine if the Ethernet address is a multicast.
798  * @addr: Pointer to a six-byte array containing the Ethernet address
799  *
800  * Return true if the address is a multicast address.
801  * By definition the broadcast address is also a multicast address.
802  */
803 static inline int is_multicast_ethaddr(const u8 *addr)
804 {
805         return 0x01 & addr[0];
806 }
807
808 /*
809  * is_broadcast_ethaddr - Determine if the Ethernet address is broadcast
810  * @addr: Pointer to a six-byte array containing the Ethernet address
811  *
812  * Return true if the address is the broadcast address.
813  */
814 static inline int is_broadcast_ethaddr(const u8 *addr)
815 {
816         return (addr[0] & addr[1] & addr[2] & addr[3] & addr[4] & addr[5]) ==
817                 0xff;
818 }
819
820 /*
821  * is_valid_ethaddr - Determine if the given Ethernet address is valid
822  * @addr: Pointer to a six-byte array containing the Ethernet address
823  *
824  * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
825  * a multicast address, and is not FF:FF:FF:FF:FF:FF.
826  *
827  * Return true if the address is valid.
828  */
829 static inline int is_valid_ethaddr(const u8 *addr)
830 {
831         /* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
832          * explicitly check for it here. */
833         return !is_multicast_ethaddr(addr) && !is_zero_ethaddr(addr);
834 }
835
836 /**
837  * net_random_ethaddr - Generate software assigned random Ethernet address
838  * @addr: Pointer to a six-byte array containing the Ethernet address
839  *
840  * Generate a random Ethernet address (MAC) that is not multicast
841  * and has the local assigned bit set.
842  */
843 static inline void net_random_ethaddr(uchar *addr)
844 {
845         int i;
846         unsigned int seed = get_ticks();
847
848         for (i = 0; i < 6; i++)
849                 addr[i] = rand_r(&seed);
850
851         addr[0] &= 0xfe;        /* clear multicast bit */
852         addr[0] |= 0x02;        /* set local assignment bit (IEEE802) */
853 }
854
855 /**
856  * string_to_enetaddr() - Parse a MAC address
857  *
858  * Convert a string MAC address
859  *
860  * Implemented in lib/net_utils.c (built unconditionally)
861  *
862  * @addr: MAC address in aa:bb:cc:dd:ee:ff format, where each part is a 2-digit
863  *      hex value
864  * @enetaddr: Place to put MAC address (6 bytes)
865  */
866 void string_to_enetaddr(const char *addr, uint8_t *enetaddr);
867
868 /* Convert an IP address to a string */
869 void ip_to_string(struct in_addr x, char *s);
870
871 /**
872  * string_to_ip() - Convert a string to ip address
873  *
874  * Implemented in lib/net_utils.c (built unconditionally)
875  *
876  * @s: Input string to parse
877  * @return: in_addr struct containing the parsed IP address
878  */
879 struct in_addr string_to_ip(const char *s);
880
881 /* Convert a VLAN id to a string */
882 void vlan_to_string(ushort x, char *s);
883
884 /* Convert a string to a vlan id */
885 ushort string_to_vlan(const char *s);
886
887 /* read a VLAN id from an environment variable */
888 ushort env_get_vlan(char *);
889
890 /* copy a filename (allow for "..." notation, limit length) */
891 void copy_filename(char *dst, const char *src, int size);
892
893 /* check if serverip is specified in filename from the command line */
894 int is_serverip_in_cmd(void);
895
896 /**
897  * net_parse_bootfile - Parse the bootfile env var / cmd line param
898  *
899  * @param ipaddr - a pointer to the ipaddr to populate if included in bootfile
900  * @param filename - a pointer to the string to save the filename part
901  * @param max_len - The longest - 1 that the filename part can be
902  *
903  * return 1 if parsed, 0 if bootfile is empty
904  */
905 int net_parse_bootfile(struct in_addr *ipaddr, char *filename, int max_len);
906
907 /**
908  * update_tftp - Update firmware over TFTP (via DFU)
909  *
910  * This function updates board's firmware via TFTP
911  *
912  * @param addr - memory address where data is stored
913  * @param interface - the DFU medium name - e.g. "mmc"
914  * @param devstring - the DFU medium number - e.g. "1"
915  *
916  * @return - 0 on success, other value on failure
917  */
918 int update_tftp(ulong addr, char *interface, char *devstring);
919
920 /**
921  * env_get_ip() - Convert an environment value to to an ip address
922  *
923  * @var: Environment variable to convert. The value of this variable must be
924  *      in the format format a.b.c.d, where each value is a decimal number from
925  *      0 to 255
926  * @return IP address, or 0 if invalid
927  */
928 static inline struct in_addr env_get_ip(char *var)
929 {
930         return string_to_ip(env_get(var));
931 }
932
933 /**
934  * reset_phy() - Reset the Ethernet PHY
935  *
936  * This should be implemented by boards if CONFIG_RESET_PHY_R is enabled
937  */
938 void reset_phy(void);
939
940 #endif /* __NET_H__ */