Convert CONFIG_SAMSUNG_ONENAND to Kconfig
[platform/kernel/u-boot.git] / include / net.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  *      LiMon Monitor (LiMon) - Network.
4  *
5  *      Copyright 1994 - 2000 Neil Russell.
6  *      (See License)
7  *
8  * History
9  *      9/16/00   bor  adapted to TQM823L/STK8xxL board, RARP/TFTP boot added
10  */
11
12 #ifndef __NET_H__
13 #define __NET_H__
14
15 #include <linux/types.h>
16 #include <asm/cache.h>
17 #include <asm/byteorder.h>      /* for nton* / ntoh* stuff */
18 #include <env.h>
19 #include <log.h>
20 #include <time.h>
21 #include <linux/if_ether.h>
22 #include <rand.h>
23
24 struct bd_info;
25 struct cmd_tbl;
26 struct udevice;
27
28 #define DEBUG_LL_STATE 0        /* Link local state machine changes */
29 #define DEBUG_DEV_PKT 0         /* Packets or info directed to the device */
30 #define DEBUG_NET_PKT 0         /* Packets on info on the network at large */
31 #define DEBUG_INT_STATE 0       /* Internal network state changes */
32
33 /*
34  *      The number of receive packet buffers, and the required packet buffer
35  *      alignment in memory.
36  *
37  */
38 #define PKTBUFSRX       CONFIG_SYS_RX_ETH_BUFFER
39 #define PKTALIGN        ARCH_DMA_MINALIGN
40
41 /* Number of packets processed together */
42 #define ETH_PACKETS_BATCH_RECV  32
43
44 /* ARP hardware address length */
45 #define ARP_HLEN 6
46 /*
47  * The size of a MAC address in string form, each digit requires two chars
48  * and five separator characters to form '00:00:00:00:00:00'.
49  */
50 #define ARP_HLEN_ASCII (ARP_HLEN * 2) + (ARP_HLEN - 1)
51
52 /* IPv4 addresses are always 32 bits in size */
53 struct in_addr {
54         __be32 s_addr;
55 };
56
57 /**
58  * do_tftpb - Run the tftpboot command
59  *
60  * @cmdtp: Command information for tftpboot
61  * @flag: Command flags (CMD_FLAG_...)
62  * @argc: Number of arguments
63  * @argv: List of arguments
64  * Return: result (see enum command_ret_t)
65  */
66 int do_tftpb(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
67
68 /**
69  * An incoming packet handler.
70  * @param pkt    pointer to the application packet
71  * @param dport  destination UDP port
72  * @param sip    source IP address
73  * @param sport  source UDP port
74  * @param len    packet length
75  */
76 typedef void rxhand_f(uchar *pkt, unsigned dport,
77                       struct in_addr sip, unsigned sport,
78                       unsigned len);
79
80 /**
81  * An incoming ICMP packet handler.
82  * @param type  ICMP type
83  * @param code  ICMP code
84  * @param dport destination UDP port
85  * @param sip   source IP address
86  * @param sport source UDP port
87  * @param pkt   pointer to the ICMP packet data
88  * @param len   packet length
89  */
90 typedef void rxhand_icmp_f(unsigned type, unsigned code, unsigned dport,
91                 struct in_addr sip, unsigned sport, uchar *pkt, unsigned len);
92
93 /*
94  *      A timeout handler.  Called after time interval has expired.
95  */
96 typedef void    thand_f(void);
97
98 enum eth_state_t {
99         ETH_STATE_INIT,
100         ETH_STATE_PASSIVE,
101         ETH_STATE_ACTIVE
102 };
103
104 #ifdef CONFIG_DM_ETH
105 /**
106  * struct eth_pdata - Platform data for Ethernet MAC controllers
107  *
108  * @iobase: The base address of the hardware registers
109  * @enetaddr: The Ethernet MAC address that is loaded from EEPROM or env
110  * @phy_interface: PHY interface to use - see PHY_INTERFACE_MODE_...
111  * @max_speed: Maximum speed of Ethernet connection supported by MAC
112  * @priv_pdata: device specific plat
113  */
114 struct eth_pdata {
115         phys_addr_t iobase;
116         unsigned char enetaddr[ARP_HLEN];
117         int phy_interface;
118         int max_speed;
119         void *priv_pdata;
120 };
121
122 enum eth_recv_flags {
123         /*
124          * Check hardware device for new packets (otherwise only return those
125          * which are already in the memory buffer ready to process)
126          */
127         ETH_RECV_CHECK_DEVICE           = 1 << 0,
128 };
129
130 /**
131  * struct eth_ops - functions of Ethernet MAC controllers
132  *
133  * start: Prepare the hardware to send and receive packets
134  * send: Send the bytes passed in "packet" as a packet on the wire
135  * recv: Check if the hardware received a packet. If so, set the pointer to the
136  *       packet buffer in the packetp parameter. If not, return an error or 0 to
137  *       indicate that the hardware receive FIFO is empty. If 0 is returned, the
138  *       network stack will not process the empty packet, but free_pkt() will be
139  *       called if supplied
140  * free_pkt: Give the driver an opportunity to manage its packet buffer memory
141  *           when the network stack is finished processing it. This will only be
142  *           called when no error was returned from recv - optional
143  * stop: Stop the hardware from looking for packets - may be called even if
144  *       state == PASSIVE
145  * mcast: Join or leave a multicast group (for TFTP) - optional
146  * write_hwaddr: Write a MAC address to the hardware (used to pass it to Linux
147  *               on some platforms like ARM). This function expects the
148  *               eth_pdata::enetaddr field to be populated. The method can
149  *               return -ENOSYS to indicate that this is not implemented for
150                  this hardware - optional.
151  * read_rom_hwaddr: Some devices have a backup of the MAC address stored in a
152  *                  ROM on the board. This is how the driver should expose it
153  *                  to the network stack. This function should fill in the
154  *                  eth_pdata::enetaddr field - optional
155  * set_promisc: Enable or Disable promiscuous mode
156  */
157 struct eth_ops {
158         int (*start)(struct udevice *dev);
159         int (*send)(struct udevice *dev, void *packet, int length);
160         int (*recv)(struct udevice *dev, int flags, uchar **packetp);
161         int (*free_pkt)(struct udevice *dev, uchar *packet, int length);
162         void (*stop)(struct udevice *dev);
163         int (*mcast)(struct udevice *dev, const u8 *enetaddr, int join);
164         int (*write_hwaddr)(struct udevice *dev);
165         int (*read_rom_hwaddr)(struct udevice *dev);
166         int (*set_promisc)(struct udevice *dev, bool enable);
167 };
168
169 #define eth_get_ops(dev) ((struct eth_ops *)(dev)->driver->ops)
170
171 struct udevice *eth_get_dev(void); /* get the current device */
172 /*
173  * The devname can be either an exact name given by the driver or device tree
174  * or it can be an alias of the form "eth%d"
175  */
176 struct udevice *eth_get_dev_by_name(const char *devname);
177 unsigned char *eth_get_ethaddr(void); /* get the current device MAC */
178
179 /* Used only when NetConsole is enabled */
180 int eth_is_active(struct udevice *dev); /* Test device for active state */
181 int eth_init_state_only(void); /* Set active state */
182 void eth_halt_state_only(void); /* Set passive state */
183 #endif
184
185 #ifndef CONFIG_DM_ETH
186 struct eth_device {
187 #define ETH_NAME_LEN 20
188         char name[ETH_NAME_LEN];
189         unsigned char enetaddr[ARP_HLEN];
190         phys_addr_t iobase;
191         int state;
192
193         int (*init)(struct eth_device *eth, struct bd_info *bd);
194         int (*send)(struct eth_device *, void *packet, int length);
195         int (*recv)(struct eth_device *);
196         void (*halt)(struct eth_device *);
197         int (*mcast)(struct eth_device *, const u8 *enetaddr, int join);
198         int (*write_hwaddr)(struct eth_device *eth);
199         struct eth_device *next;
200         int index;
201         void *priv;
202 };
203
204 int eth_register(struct eth_device *dev);/* Register network device */
205 int eth_unregister(struct eth_device *dev);/* Remove network device */
206
207 extern struct eth_device *eth_current;
208
209 static __always_inline struct eth_device *eth_get_dev(void)
210 {
211         return eth_current;
212 }
213 struct eth_device *eth_get_dev_by_name(const char *devname);
214 struct eth_device *eth_get_dev_by_index(int index); /* get dev @ index */
215
216 /* get the current device MAC */
217 static inline unsigned char *eth_get_ethaddr(void)
218 {
219         if (eth_current)
220                 return eth_current->enetaddr;
221         return NULL;
222 }
223
224 /* Used only when NetConsole is enabled */
225 int eth_is_active(struct eth_device *dev); /* Test device for active state */
226 /* Set active state */
227 static __always_inline int eth_init_state_only(void)
228 {
229         eth_get_dev()->state = ETH_STATE_ACTIVE;
230
231         return 0;
232 }
233 /* Set passive state */
234 static __always_inline void eth_halt_state_only(void)
235 {
236         eth_get_dev()->state = ETH_STATE_PASSIVE;
237 }
238
239 /*
240  * Set the hardware address for an ethernet interface based on 'eth%daddr'
241  * environment variable (or just 'ethaddr' if eth_number is 0).
242  * Args:
243  *      base_name - base name for device (normally "eth")
244  *      eth_number - value of %d (0 for first device of this type)
245  * Returns:
246  *      0 is success, non-zero is error status from driver.
247  */
248 int eth_write_hwaddr(struct eth_device *dev, const char *base_name,
249                      int eth_number);
250
251 int usb_eth_initialize(struct bd_info *bi);
252 #endif
253
254 int eth_initialize(void);               /* Initialize network subsystem */
255 void eth_try_another(int first_restart);        /* Change the device */
256 void eth_set_current(void);             /* set nterface to ethcur var */
257
258 int eth_get_dev_index(void);            /* get the device index */
259
260 /**
261  * eth_env_set_enetaddr_by_index() - set the MAC address environment variable
262  *
263  * This sets up an environment variable with the given MAC address (@enetaddr).
264  * The environment variable to be set is defined by <@base_name><@index>addr.
265  * If @index is 0 it is omitted. For common Ethernet this means ethaddr,
266  * eth1addr, etc.
267  *
268  * @base_name:  Base name for variable, typically "eth"
269  * @index:      Index of interface being updated (>=0)
270  * @enetaddr:   Pointer to MAC address to put into the variable
271  * Return: 0 if OK, other value on error
272  */
273 int eth_env_set_enetaddr_by_index(const char *base_name, int index,
274                                  uchar *enetaddr);
275
276
277 /*
278  * Initialize USB ethernet device with CONFIG_DM_ETH
279  * Returns:
280  *      0 is success, non-zero is error status.
281  */
282 int usb_ether_init(void);
283
284 /*
285  * Get the hardware address for an ethernet interface .
286  * Args:
287  *      base_name - base name for device (normally "eth")
288  *      index - device index number (0 for first)
289  *      enetaddr - returns 6 byte hardware address
290  * Returns:
291  *      Return true if the address is valid.
292  */
293 int eth_env_get_enetaddr_by_index(const char *base_name, int index,
294                                  uchar *enetaddr);
295
296 int eth_init(void);                     /* Initialize the device */
297 int eth_send(void *packet, int length);    /* Send a packet */
298
299 #if defined(CONFIG_API) || defined(CONFIG_EFI_LOADER)
300 int eth_receive(void *packet, int length); /* Receive a packet*/
301 extern void (*push_packet)(void *packet, int length);
302 #endif
303 int eth_rx(void);                       /* Check for received packets */
304 void eth_halt(void);                    /* stop SCC */
305 const char *eth_get_name(void);         /* get name of current device */
306 int eth_mcast_join(struct in_addr mcast_addr, int join);
307
308 /**********************************************************************/
309 /*
310  *      Protocol headers.
311  */
312
313 /*
314  *      Ethernet header
315  */
316
317 struct ethernet_hdr {
318         u8              et_dest[ARP_HLEN];      /* Destination node     */
319         u8              et_src[ARP_HLEN];       /* Source node          */
320         u16             et_protlen;             /* Protocol or length   */
321 } __attribute__((packed));
322
323 /* Ethernet header size */
324 #define ETHER_HDR_SIZE  (sizeof(struct ethernet_hdr))
325
326 #define ETH_FCS_LEN     4               /* Octets in the FCS            */
327
328 struct e802_hdr {
329         u8              et_dest[ARP_HLEN];      /* Destination node     */
330         u8              et_src[ARP_HLEN];       /* Source node          */
331         u16             et_protlen;             /* Protocol or length   */
332         u8              et_dsap;                /* 802 DSAP             */
333         u8              et_ssap;                /* 802 SSAP             */
334         u8              et_ctl;                 /* 802 control          */
335         u8              et_snap1;               /* SNAP                 */
336         u8              et_snap2;
337         u8              et_snap3;
338         u16             et_prot;                /* 802 protocol         */
339 } __attribute__((packed));
340
341 /* 802 + SNAP + ethernet header size */
342 #define E802_HDR_SIZE   (sizeof(struct e802_hdr))
343
344 /*
345  *      Virtual LAN Ethernet header
346  */
347 struct vlan_ethernet_hdr {
348         u8              vet_dest[ARP_HLEN];     /* Destination node     */
349         u8              vet_src[ARP_HLEN];      /* Source node          */
350         u16             vet_vlan_type;          /* PROT_VLAN            */
351         u16             vet_tag;                /* TAG of VLAN          */
352         u16             vet_type;               /* protocol type        */
353 } __attribute__((packed));
354
355 /* VLAN Ethernet header size */
356 #define VLAN_ETHER_HDR_SIZE     (sizeof(struct vlan_ethernet_hdr))
357
358 #define PROT_IP         0x0800          /* IP protocol                  */
359 #define PROT_ARP        0x0806          /* IP ARP protocol              */
360 #define PROT_WOL        0x0842          /* ether-wake WoL protocol      */
361 #define PROT_RARP       0x8035          /* IP ARP protocol              */
362 #define PROT_VLAN       0x8100          /* IEEE 802.1q protocol         */
363 #define PROT_IPV6       0x86dd          /* IPv6 over bluebook           */
364 #define PROT_PPP_SES    0x8864          /* PPPoE session messages       */
365 #define PROT_NCSI       0x88f8          /* NC-SI control packets        */
366
367 #define IPPROTO_ICMP     1      /* Internet Control Message Protocol    */
368 #define IPPROTO_UDP     17      /* User Datagram Protocol               */
369
370 /*
371  *      Internet Protocol (IP) header.
372  */
373 struct ip_hdr {
374         u8              ip_hl_v;        /* header length and version    */
375         u8              ip_tos;         /* type of service              */
376         u16             ip_len;         /* total length                 */
377         u16             ip_id;          /* identification               */
378         u16             ip_off;         /* fragment offset field        */
379         u8              ip_ttl;         /* time to live                 */
380         u8              ip_p;           /* protocol                     */
381         u16             ip_sum;         /* checksum                     */
382         struct in_addr  ip_src;         /* Source IP address            */
383         struct in_addr  ip_dst;         /* Destination IP address       */
384 } __attribute__((packed));
385
386 #define IP_OFFS         0x1fff /* ip offset *= 8 */
387 #define IP_FLAGS        0xe000 /* first 3 bits */
388 #define IP_FLAGS_RES    0x8000 /* reserved */
389 #define IP_FLAGS_DFRAG  0x4000 /* don't fragments */
390 #define IP_FLAGS_MFRAG  0x2000 /* more fragments */
391
392 #define IP_HDR_SIZE             (sizeof(struct ip_hdr))
393
394 #define IP_MIN_FRAG_DATAGRAM_SIZE       (IP_HDR_SIZE + 8)
395
396 /*
397  *      Internet Protocol (IP) + UDP header.
398  */
399 struct ip_udp_hdr {
400         u8              ip_hl_v;        /* header length and version    */
401         u8              ip_tos;         /* type of service              */
402         u16             ip_len;         /* total length                 */
403         u16             ip_id;          /* identification               */
404         u16             ip_off;         /* fragment offset field        */
405         u8              ip_ttl;         /* time to live                 */
406         u8              ip_p;           /* protocol                     */
407         u16             ip_sum;         /* checksum                     */
408         struct in_addr  ip_src;         /* Source IP address            */
409         struct in_addr  ip_dst;         /* Destination IP address       */
410         u16             udp_src;        /* UDP source port              */
411         u16             udp_dst;        /* UDP destination port         */
412         u16             udp_len;        /* Length of UDP packet         */
413         u16             udp_xsum;       /* Checksum                     */
414 } __attribute__((packed));
415
416 #define IP_UDP_HDR_SIZE         (sizeof(struct ip_udp_hdr))
417 #define UDP_HDR_SIZE            (IP_UDP_HDR_SIZE - IP_HDR_SIZE)
418
419 /*
420  *      Address Resolution Protocol (ARP) header.
421  */
422 struct arp_hdr {
423         u16             ar_hrd;         /* Format of hardware address   */
424 #   define ARP_ETHER        1           /* Ethernet  hardware address   */
425         u16             ar_pro;         /* Format of protocol address   */
426         u8              ar_hln;         /* Length of hardware address   */
427         u8              ar_pln;         /* Length of protocol address   */
428 #   define ARP_PLEN     4
429         u16             ar_op;          /* Operation                    */
430 #   define ARPOP_REQUEST    1           /* Request  to resolve  address */
431 #   define ARPOP_REPLY      2           /* Response to previous request */
432
433 #   define RARPOP_REQUEST   3           /* Request  to resolve  address */
434 #   define RARPOP_REPLY     4           /* Response to previous request */
435
436         /*
437          * The remaining fields are variable in size, according to
438          * the sizes above, and are defined as appropriate for
439          * specific hardware/protocol combinations.
440          */
441         u8              ar_data[0];
442 #define ar_sha          ar_data[0]
443 #define ar_spa          ar_data[ARP_HLEN]
444 #define ar_tha          ar_data[ARP_HLEN + ARP_PLEN]
445 #define ar_tpa          ar_data[ARP_HLEN + ARP_PLEN + ARP_HLEN]
446 #if 0
447         u8              ar_sha[];       /* Sender hardware address      */
448         u8              ar_spa[];       /* Sender protocol address      */
449         u8              ar_tha[];       /* Target hardware address      */
450         u8              ar_tpa[];       /* Target protocol address      */
451 #endif /* 0 */
452 } __attribute__((packed));
453
454 #define ARP_HDR_SIZE    (8+20)          /* Size assuming ethernet       */
455
456 /*
457  * ICMP stuff (just enough to handle (host) redirect messages)
458  */
459 #define ICMP_ECHO_REPLY         0       /* Echo reply                   */
460 #define ICMP_NOT_REACH          3       /* Detination unreachable       */
461 #define ICMP_REDIRECT           5       /* Redirect (change route)      */
462 #define ICMP_ECHO_REQUEST       8       /* Echo request                 */
463
464 /* Codes for REDIRECT. */
465 #define ICMP_REDIR_NET          0       /* Redirect Net                 */
466 #define ICMP_REDIR_HOST         1       /* Redirect Host                */
467
468 /* Codes for NOT_REACH */
469 #define ICMP_NOT_REACH_PORT     3       /* Port unreachable             */
470
471 struct icmp_hdr {
472         u8              type;
473         u8              code;
474         u16             checksum;
475         union {
476                 struct {
477                         u16     id;
478                         u16     sequence;
479                 } echo;
480                 u32     gateway;
481                 struct {
482                         u16     unused;
483                         u16     mtu;
484                 } frag;
485                 u8 data[0];
486         } un;
487 } __attribute__((packed));
488
489 #define ICMP_HDR_SIZE           (sizeof(struct icmp_hdr))
490 #define IP_ICMP_HDR_SIZE        (IP_HDR_SIZE + ICMP_HDR_SIZE)
491
492 /*
493  * Maximum packet size; used to allocate packet storage. Use
494  * the maxium Ethernet frame size as specified by the Ethernet
495  * standard including the 802.1Q tag (VLAN tagging).
496  * maximum packet size =  1522
497  * maximum packet size and multiple of 32 bytes =  1536
498  */
499 #define PKTSIZE                 1522
500 #ifndef CONFIG_DM_DSA
501 #define PKTSIZE_ALIGN           1536
502 #else
503 /* Maximum DSA tagging overhead (headroom and/or tailroom) */
504 #define DSA_MAX_OVR             256
505 #define PKTSIZE_ALIGN           (1536 + DSA_MAX_OVR)
506 #endif
507
508 /*
509  * Maximum receive ring size; that is, the number of packets
510  * we can buffer before overflow happens. Basically, this just
511  * needs to be enough to prevent a packet being discarded while
512  * we are processing the previous one.
513  */
514 #define RINGSZ          4
515 #define RINGSZ_LOG2     2
516
517 /**********************************************************************/
518 /*
519  *      Globals.
520  *
521  * Note:
522  *
523  * All variables of type struct in_addr are stored in NETWORK byte order
524  * (big endian).
525  */
526
527 /* net.c */
528 /** BOOTP EXTENTIONS **/
529 extern struct in_addr net_gateway;      /* Our gateway IP address */
530 extern struct in_addr net_netmask;      /* Our subnet mask (0 = unknown) */
531 /* Our Domain Name Server (0 = unknown) */
532 extern struct in_addr net_dns_server;
533 #if defined(CONFIG_BOOTP_DNS2)
534 /* Our 2nd Domain Name Server (0 = unknown) */
535 extern struct in_addr net_dns_server2;
536 #endif
537 extern char     net_nis_domain[32];     /* Our IS domain */
538 extern char     net_hostname[32];       /* Our hostname */
539 extern char     net_root_path[64];      /* Our root path */
540 /** END OF BOOTP EXTENTIONS **/
541 extern u8               net_ethaddr[ARP_HLEN];          /* Our ethernet address */
542 extern u8               net_server_ethaddr[ARP_HLEN];   /* Boot server enet address */
543 extern struct in_addr   net_ip;         /* Our    IP addr (0 = unknown) */
544 extern struct in_addr   net_server_ip;  /* Server IP addr (0 = unknown) */
545 extern uchar            *net_tx_packet;         /* THE transmit packet */
546 extern uchar            *net_rx_packets[PKTBUFSRX]; /* Receive packets */
547 extern uchar            *net_rx_packet;         /* Current receive packet */
548 extern int              net_rx_packet_len;      /* Current rx packet length */
549 extern const u8         net_bcast_ethaddr[ARP_HLEN];    /* Ethernet broadcast address */
550 extern const u8         net_null_ethaddr[ARP_HLEN];
551
552 #define VLAN_NONE       4095                    /* untagged */
553 #define VLAN_IDMASK     0x0fff                  /* mask of valid vlan id */
554 extern ushort           net_our_vlan;           /* Our VLAN */
555 extern ushort           net_native_vlan;        /* Our Native VLAN */
556
557 extern int              net_restart_wrap;       /* Tried all network devices */
558
559 enum proto_t {
560         BOOTP, RARP, ARP, TFTPGET, DHCP, PING, DNS, NFS, CDP, NETCONS, SNTP,
561         TFTPSRV, TFTPPUT, LINKLOCAL, FASTBOOT, WOL, UDP
562 };
563
564 extern char     net_boot_file_name[1024];/* Boot File name */
565 /* Indicates whether the file name was specified on the command line */
566 extern bool     net_boot_file_name_explicit;
567 /* The actual transferred size of the bootfile (in bytes) */
568 extern u32      net_boot_file_size;
569 /* Boot file size in blocks as reported by the DHCP server */
570 extern u32      net_boot_file_expected_size_in_blocks;
571
572 #if defined(CONFIG_CMD_DNS)
573 extern char *net_dns_resolve;           /* The host to resolve  */
574 extern char *net_dns_env_var;           /* the env var to put the ip into */
575 #endif
576
577 #if defined(CONFIG_CMD_PING)
578 extern struct in_addr net_ping_ip;      /* the ip address to ping */
579 #endif
580
581 #if defined(CONFIG_CMD_CDP)
582 /* when CDP completes these hold the return values */
583 extern ushort cdp_native_vlan;          /* CDP returned native VLAN */
584 extern ushort cdp_appliance_vlan;       /* CDP returned appliance VLAN */
585
586 /*
587  * Check for a CDP packet by examining the received MAC address field
588  */
589 static inline int is_cdp_packet(const uchar *ethaddr)
590 {
591         extern const u8 net_cdp_ethaddr[ARP_HLEN];
592
593         return memcmp(ethaddr, net_cdp_ethaddr, ARP_HLEN) == 0;
594 }
595 #endif
596
597 #if defined(CONFIG_CMD_SNTP)
598 extern struct in_addr   net_ntp_server;         /* the ip address to NTP */
599 extern int net_ntp_time_offset;                 /* offset time from UTC */
600 #endif
601
602 /* Initialize the network adapter */
603 int net_init(void);
604 int net_loop(enum proto_t);
605
606 /* Load failed.  Start again. */
607 int net_start_again(void);
608
609 /* Get size of the ethernet header when we send */
610 int net_eth_hdr_size(void);
611
612 /* Set ethernet header; returns the size of the header */
613 int net_set_ether(uchar *xet, const uchar *dest_ethaddr, uint prot);
614 int net_update_ether(struct ethernet_hdr *et, uchar *addr, uint prot);
615
616 /* Set IP header */
617 void net_set_ip_header(uchar *pkt, struct in_addr dest, struct in_addr source,
618                        u16 pkt_len, u8 proto);
619 void net_set_udp_header(uchar *pkt, struct in_addr dest, int dport,
620                                 int sport, int len);
621
622 /**
623  * compute_ip_checksum() - Compute IP checksum
624  *
625  * @addr:       Address to check (must be 16-bit aligned)
626  * @nbytes:     Number of bytes to check (normally a multiple of 2)
627  * Return: 16-bit IP checksum
628  */
629 unsigned compute_ip_checksum(const void *addr, unsigned nbytes);
630
631 /**
632  * add_ip_checksums() - add two IP checksums
633  *
634  * @offset:     Offset of first sum (if odd we do a byte-swap)
635  * @sum:        First checksum
636  * @new_sum:    New checksum to add
637  * Return: updated 16-bit IP checksum
638  */
639 unsigned add_ip_checksums(unsigned offset, unsigned sum, unsigned new_sum);
640
641 /**
642  * ip_checksum_ok() - check if a checksum is correct
643  *
644  * This works by making sure the checksum sums to 0
645  *
646  * @addr:       Address to check (must be 16-bit aligned)
647  * @nbytes:     Number of bytes to check (normally a multiple of 2)
648  * Return: true if the checksum matches, false if not
649  */
650 int ip_checksum_ok(const void *addr, unsigned nbytes);
651
652 /* Callbacks */
653 rxhand_f *net_get_udp_handler(void);    /* Get UDP RX packet handler */
654 void net_set_udp_handler(rxhand_f *);   /* Set UDP RX packet handler */
655 rxhand_f *net_get_arp_handler(void);    /* Get ARP RX packet handler */
656 void net_set_arp_handler(rxhand_f *);   /* Set ARP RX packet handler */
657 bool arp_is_waiting(void);              /* Waiting for ARP reply? */
658 void net_set_icmp_handler(rxhand_icmp_f *f); /* Set ICMP RX handler */
659 void net_set_timeout_handler(ulong, thand_f *);/* Set timeout handler */
660
661 /* Network loop state */
662 enum net_loop_state {
663         NETLOOP_CONTINUE,
664         NETLOOP_RESTART,
665         NETLOOP_SUCCESS,
666         NETLOOP_FAIL
667 };
668 extern enum net_loop_state net_state;
669
670 static inline void net_set_state(enum net_loop_state state)
671 {
672         debug_cond(DEBUG_INT_STATE, "--- NetState set to %d\n", state);
673         net_state = state;
674 }
675
676 /*
677  * net_get_async_tx_pkt_buf - Get a packet buffer that is not in use for
678  *                            sending an asynchronous reply
679  *
680  * returns - ptr to packet buffer
681  */
682 uchar * net_get_async_tx_pkt_buf(void);
683
684 /* Transmit a packet */
685 static inline void net_send_packet(uchar *pkt, int len)
686 {
687         /* Currently no way to return errors from eth_send() */
688         (void) eth_send(pkt, len);
689 }
690
691 /*
692  * Transmit "net_tx_packet" as UDP packet, performing ARP request if needed
693  *  (ether will be populated)
694  *
695  * @param ether Raw packet buffer
696  * @param dest IP address to send the datagram to
697  * @param dport Destination UDP port
698  * @param sport Source UDP port
699  * @param payload_len Length of data after the UDP header
700  */
701 int net_send_ip_packet(uchar *ether, struct in_addr dest, int dport, int sport,
702                        int payload_len, int proto, u8 action, u32 tcp_seq_num,
703                        u32 tcp_ack_num);
704 int net_send_udp_packet(uchar *ether, struct in_addr dest, int dport,
705                         int sport, int payload_len);
706
707 /* Processes a received packet */
708 void net_process_received_packet(uchar *in_packet, int len);
709
710 #if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD)
711 void nc_start(void);
712 int nc_input_packet(uchar *pkt, struct in_addr src_ip, unsigned dest_port,
713         unsigned src_port, unsigned len);
714 #endif
715
716 static __always_inline int eth_is_on_demand_init(void)
717 {
718 #if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD)
719         extern enum proto_t net_loop_last_protocol;
720
721         return net_loop_last_protocol != NETCONS;
722 #else
723         return 1;
724 #endif
725 }
726
727 static inline void eth_set_last_protocol(int protocol)
728 {
729 #if defined(CONFIG_NETCONSOLE) && !defined(CONFIG_SPL_BUILD)
730         extern enum proto_t net_loop_last_protocol;
731
732         net_loop_last_protocol = protocol;
733 #endif
734 }
735
736 /*
737  * Check if autoload is enabled. If so, use either NFS or TFTP to download
738  * the boot file.
739  */
740 void net_auto_load(void);
741
742 /*
743  * The following functions are a bit ugly, but necessary to deal with
744  * alignment restrictions on ARM.
745  *
746  * We're using inline functions, which had the smallest memory
747  * footprint in our tests.
748  */
749 /* return IP *in network byteorder* */
750 static inline struct in_addr net_read_ip(void *from)
751 {
752         struct in_addr ip;
753
754         memcpy((void *)&ip, (void *)from, sizeof(ip));
755         return ip;
756 }
757
758 /* return ulong *in network byteorder* */
759 static inline u32 net_read_u32(void *from)
760 {
761         u32 l;
762
763         memcpy((void *)&l, (void *)from, sizeof(l));
764         return l;
765 }
766
767 /* write IP *in network byteorder* */
768 static inline void net_write_ip(void *to, struct in_addr ip)
769 {
770         memcpy(to, (void *)&ip, sizeof(ip));
771 }
772
773 /* copy IP */
774 static inline void net_copy_ip(void *to, void *from)
775 {
776         memcpy((void *)to, from, sizeof(struct in_addr));
777 }
778
779 /* copy ulong */
780 static inline void net_copy_u32(void *to, void *from)
781 {
782         memcpy((void *)to, (void *)from, sizeof(u32));
783 }
784
785 /**
786  * is_zero_ethaddr - Determine if give Ethernet address is all zeros.
787  * @addr: Pointer to a six-byte array containing the Ethernet address
788  *
789  * Return true if the address is all zeroes.
790  */
791 static inline int is_zero_ethaddr(const u8 *addr)
792 {
793         return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]);
794 }
795
796 /**
797  * is_multicast_ethaddr - Determine if the Ethernet address is a multicast.
798  * @addr: Pointer to a six-byte array containing the Ethernet address
799  *
800  * Return true if the address is a multicast address.
801  * By definition the broadcast address is also a multicast address.
802  */
803 static inline int is_multicast_ethaddr(const u8 *addr)
804 {
805         return 0x01 & addr[0];
806 }
807
808 /*
809  * is_broadcast_ethaddr - Determine if the Ethernet address is broadcast
810  * @addr: Pointer to a six-byte array containing the Ethernet address
811  *
812  * Return true if the address is the broadcast address.
813  */
814 static inline int is_broadcast_ethaddr(const u8 *addr)
815 {
816         return (addr[0] & addr[1] & addr[2] & addr[3] & addr[4] & addr[5]) ==
817                 0xff;
818 }
819
820 /*
821  * is_valid_ethaddr - Determine if the given Ethernet address is valid
822  * @addr: Pointer to a six-byte array containing the Ethernet address
823  *
824  * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
825  * a multicast address, and is not FF:FF:FF:FF:FF:FF.
826  *
827  * Return true if the address is valid.
828  */
829 static inline int is_valid_ethaddr(const u8 *addr)
830 {
831         /* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
832          * explicitly check for it here. */
833         return !is_multicast_ethaddr(addr) && !is_zero_ethaddr(addr);
834 }
835
836 /**
837  * net_random_ethaddr - Generate software assigned random Ethernet address
838  * @addr: Pointer to a six-byte array containing the Ethernet address
839  *
840  * Generate a random Ethernet address (MAC) that is not multicast
841  * and has the local assigned bit set.
842  */
843 static inline void net_random_ethaddr(uchar *addr)
844 {
845         int i;
846         unsigned int seed = get_ticks();
847
848         for (i = 0; i < 6; i++)
849                 addr[i] = rand_r(&seed);
850
851         addr[0] &= 0xfe;        /* clear multicast bit */
852         addr[0] |= 0x02;        /* set local assignment bit (IEEE802) */
853 }
854
855 /**
856  * string_to_enetaddr() - Parse a MAC address
857  *
858  * Convert a string MAC address
859  *
860  * Implemented in lib/net_utils.c (built unconditionally)
861  *
862  * @addr: MAC address in aa:bb:cc:dd:ee:ff format, where each part is a 2-digit
863  *      hex value
864  * @enetaddr: Place to put MAC address (6 bytes)
865  */
866 void string_to_enetaddr(const char *addr, uint8_t *enetaddr);
867
868 /* Convert an IP address to a string */
869 void ip_to_string(struct in_addr x, char *s);
870
871 /**
872  * string_to_ip() - Convert a string to ip address
873  *
874  * Implemented in lib/net_utils.c (built unconditionally)
875  *
876  * @s: Input string to parse
877  * @return: in_addr struct containing the parsed IP address
878  */
879 struct in_addr string_to_ip(const char *s);
880
881 /* Convert a VLAN id to a string */
882 void vlan_to_string(ushort x, char *s);
883
884 /* Convert a string to a vlan id */
885 ushort string_to_vlan(const char *s);
886
887 /* read a VLAN id from an environment variable */
888 ushort env_get_vlan(char *);
889
890 /* copy a filename (allow for "..." notation, limit length) */
891 void copy_filename(char *dst, const char *src, int size);
892
893 /* check if serverip is specified in filename from the command line */
894 int is_serverip_in_cmd(void);
895
896 /**
897  * net_parse_bootfile - Parse the bootfile env var / cmd line param
898  *
899  * @param ipaddr - a pointer to the ipaddr to populate if included in bootfile
900  * @param filename - a pointer to the string to save the filename part
901  * @param max_len - The longest - 1 that the filename part can be
902  *
903  * return 1 if parsed, 0 if bootfile is empty
904  */
905 int net_parse_bootfile(struct in_addr *ipaddr, char *filename, int max_len);
906
907 /**
908  * update_tftp - Update firmware over TFTP (via DFU)
909  *
910  * This function updates board's firmware via TFTP
911  *
912  * @param addr - memory address where data is stored
913  * @param interface - the DFU medium name - e.g. "mmc"
914  * @param devstring - the DFU medium number - e.g. "1"
915  *
916  * Return: - 0 on success, other value on failure
917  */
918 int update_tftp(ulong addr, char *interface, char *devstring);
919
920 /**
921  * env_get_ip() - Convert an environment value to to an ip address
922  *
923  * @var: Environment variable to convert. The value of this variable must be
924  *      in the format format a.b.c.d, where each value is a decimal number from
925  *      0 to 255
926  * Return: IP address, or 0 if invalid
927  */
928 static inline struct in_addr env_get_ip(char *var)
929 {
930         return string_to_ip(env_get(var));
931 }
932
933 /**
934  * reset_phy() - Reset the Ethernet PHY
935  *
936  * This should be implemented by boards if CONFIG_RESET_PHY_R is enabled
937  */
938 void reset_phy(void);
939
940 #endif /* __NET_H__ */