2 * Copyright 2008,2010 Freescale Semiconductor, Inc
5 * Based (loosely) on the Linux code
7 * SPDX-License-Identifier: GPL-2.0+
13 #include <linux/list.h>
14 #include <linux/compiler.h>
16 #define SD_VERSION_SD 0x20000
17 #define SD_VERSION_3 (SD_VERSION_SD | 0x300)
18 #define SD_VERSION_2 (SD_VERSION_SD | 0x200)
19 #define SD_VERSION_1_0 (SD_VERSION_SD | 0x100)
20 #define SD_VERSION_1_10 (SD_VERSION_SD | 0x10a)
21 #define MMC_VERSION_MMC 0x10000
22 #define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC)
23 #define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x102)
24 #define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x104)
25 #define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x202)
26 #define MMC_VERSION_3 (MMC_VERSION_MMC | 0x300)
27 #define MMC_VERSION_4 (MMC_VERSION_MMC | 0x400)
28 #define MMC_VERSION_4_1 (MMC_VERSION_MMC | 0x401)
29 #define MMC_VERSION_4_2 (MMC_VERSION_MMC | 0x402)
30 #define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x403)
31 #define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429)
32 #define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405)
34 #define MMC_MODE_HS 0x001
35 #define MMC_MODE_HS_52MHz 0x010
36 #define MMC_MODE_4BIT 0x100
37 #define MMC_MODE_8BIT 0x200
38 #define MMC_MODE_SPI 0x400
39 #define MMC_MODE_HC 0x800
41 #define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT)
42 #define MMC_MODE_WIDTH_BITS_SHIFT 8
44 #define SD_DATA_4BIT 0x00040000
46 #define IS_SD(x) (x->version & SD_VERSION_SD)
48 #define MMC_DATA_READ 1
49 #define MMC_DATA_WRITE 2
51 #define NO_CARD_ERR -16 /* No SD/MMC card inserted */
52 #define UNUSABLE_ERR -17 /* Unusable Card */
53 #define COMM_ERR -18 /* Communications Error */
55 #define IN_PROGRESS -20 /* operation is in progress */
57 #define MMC_CMD_GO_IDLE_STATE 0
58 #define MMC_CMD_SEND_OP_COND 1
59 #define MMC_CMD_ALL_SEND_CID 2
60 #define MMC_CMD_SET_RELATIVE_ADDR 3
61 #define MMC_CMD_SET_DSR 4
62 #define MMC_CMD_SWITCH 6
63 #define MMC_CMD_SELECT_CARD 7
64 #define MMC_CMD_SEND_EXT_CSD 8
65 #define MMC_CMD_SEND_CSD 9
66 #define MMC_CMD_SEND_CID 10
67 #define MMC_CMD_STOP_TRANSMISSION 12
68 #define MMC_CMD_SEND_STATUS 13
69 #define MMC_CMD_SET_BLOCKLEN 16
70 #define MMC_CMD_READ_SINGLE_BLOCK 17
71 #define MMC_CMD_READ_MULTIPLE_BLOCK 18
72 #define MMC_CMD_WRITE_SINGLE_BLOCK 24
73 #define MMC_CMD_WRITE_MULTIPLE_BLOCK 25
74 #define MMC_CMD_ERASE_GROUP_START 35
75 #define MMC_CMD_ERASE_GROUP_END 36
76 #define MMC_CMD_ERASE 38
77 #define MMC_CMD_APP_CMD 55
78 #define MMC_CMD_SPI_READ_OCR 58
79 #define MMC_CMD_SPI_CRC_ON_OFF 59
80 #define MMC_CMD_RES_MAN 62
82 #define MMC_CMD62_ARG1 0xefac62ec
83 #define MMC_CMD62_ARG2 0xcbaea7
86 #define SD_CMD_SEND_RELATIVE_ADDR 3
87 #define SD_CMD_SWITCH_FUNC 6
88 #define SD_CMD_SEND_IF_COND 8
90 #define SD_CMD_APP_SET_BUS_WIDTH 6
91 #define SD_CMD_ERASE_WR_BLK_START 32
92 #define SD_CMD_ERASE_WR_BLK_END 33
93 #define SD_CMD_APP_SEND_OP_COND 41
94 #define SD_CMD_APP_SEND_SCR 51
96 /* SCR definitions in different words */
97 #define SD_HIGHSPEED_BUSY 0x00020000
98 #define SD_HIGHSPEED_SUPPORTED 0x00020000
100 #define MMC_HS_TIMING 0x00000100
101 #define MMC_HS_52MHZ 0x2
103 #define OCR_BUSY 0x80000000
104 #define OCR_HCS 0x40000000
105 #define OCR_VOLTAGE_MASK 0x007FFF80
106 #define OCR_ACCESS_MODE 0x60000000
108 #define SECURE_ERASE 0x80000000
110 #define MMC_STATUS_MASK (~0x0206BF7F)
111 #define MMC_STATUS_RDY_FOR_DATA (1 << 8)
112 #define MMC_STATUS_CURR_STATE (0xf << 9)
113 #define MMC_STATUS_ERROR (1 << 19)
115 #define MMC_STATE_PRG (7 << 9)
117 #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
118 #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
119 #define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */
120 #define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */
121 #define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */
122 #define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */
123 #define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */
124 #define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */
125 #define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */
126 #define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */
127 #define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */
128 #define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */
129 #define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */
130 #define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */
131 #define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */
132 #define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */
133 #define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */
135 #define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */
136 #define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits in EXT_CSD byte
137 addressed by index which are
139 #define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits in EXT_CSD byte
140 addressed by index, which are
142 #define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target byte to value */
144 #define SD_SWITCH_CHECK 0
145 #define SD_SWITCH_SWITCH 1
150 #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
151 #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */
152 #define EXT_CSD_RPMB_MULT 168 /* RO */
153 #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
154 #define EXT_CSD_BOOT_BUS_WIDTH 177
155 #define EXT_CSD_PART_CONF 179 /* R/W */
156 #define EXT_CSD_BUS_WIDTH 183 /* R/W */
157 #define EXT_CSD_HS_TIMING 185 /* R/W */
158 #define EXT_CSD_REV 192 /* RO */
159 #define EXT_CSD_CARD_TYPE 196 /* RO */
160 #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
161 #define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */
162 #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
163 #define EXT_CSD_BOOT_MULT 226 /* RO */
166 * EXT_CSD field definitions
169 #define EXT_CSD_CMD_SET_NORMAL (1 << 0)
170 #define EXT_CSD_CMD_SET_SECURE (1 << 1)
171 #define EXT_CSD_CMD_SET_CPSECURE (1 << 2)
173 #define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */
174 #define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */
176 #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
177 #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
178 #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
180 #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
181 #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
182 #define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0)
183 #define EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0)
185 #define EXT_CSD_BOOT_ACK(x) (x << 6)
186 #define EXT_CSD_BOOT_PART_NUM(x) (x << 3)
187 #define EXT_CSD_PARTITION_ACCESS(x) (x << 0)
190 #define R1_ILLEGAL_COMMAND (1 << 22)
191 #define R1_APP_CMD (1 << 5)
193 #define MMC_RSP_PRESENT (1 << 0)
194 #define MMC_RSP_136 (1 << 1) /* 136 bit response */
195 #define MMC_RSP_CRC (1 << 2) /* expect valid crc */
196 #define MMC_RSP_BUSY (1 << 3) /* card may send busy */
197 #define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
199 #define MMC_RSP_NONE (0)
200 #define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
201 #define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \
203 #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
204 #define MMC_RSP_R3 (MMC_RSP_PRESENT)
205 #define MMC_RSP_R4 (MMC_RSP_PRESENT)
206 #define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
207 #define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
208 #define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
210 #define MMCPART_NOAVAILABLE (0xff)
211 #define PART_ACCESS_MASK (0x7)
212 #define PART_SUPPORT (0x1)
214 /* Maximum block size for MMC */
215 #define MMC_MAX_BLOCK_LEN 512
217 /* The number of MMC physical partitions. These consist of:
218 * boot partitions (2), general purpose partitions (4) in MMC v4.4.
220 #define MMC_NUM_BOOT_PARTITION 2
241 const char *src; /* src buffers don't get written to */
249 struct list_head link;
278 block_dev_desc_t block_dev;
279 int (*send_cmd)(struct mmc *mmc,
280 struct mmc_cmd *cmd, struct mmc_data *data);
281 void (*set_ios)(struct mmc *mmc);
282 int (*init)(struct mmc *mmc);
283 int (*getcd)(struct mmc *mmc);
284 int (*getwp)(struct mmc *mmc);
286 char op_cond_pending; /* 1 if we are waiting on an op_cond command */
287 char init_in_progress; /* 1 if we have done mmc_start_init() */
288 char preinit; /* start init as early as possible */
289 uint op_cond_response; /* the response byte from the last op_cond */
292 int mmc_register(struct mmc *mmc);
293 int mmc_initialize(bd_t *bis);
294 int mmc_init(struct mmc *mmc);
295 int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size);
296 void mmc_set_clock(struct mmc *mmc, uint clock);
297 struct mmc *find_mmc_device(int dev_num);
298 int mmc_set_dev(int dev_num);
299 void print_mmc_devices(char separator);
300 int get_mmc_num(void);
301 int board_mmc_getcd(struct mmc *mmc);
302 int mmc_switch_part(int dev_num, unsigned int part_num);
303 int mmc_getcd(struct mmc *mmc);
304 int mmc_getwp(struct mmc *mmc);
305 void spl_mmc_load(void) __noreturn;
306 /* Function to change the size of boot partition and rpmb partitions */
307 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
308 unsigned long rpmbsize);
309 /* Function to send commands to open/close the specified boot partition */
310 int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
313 * Start device initialization and return immediately; it does not block on
314 * polling OCR (operation condition register) status. Then you should call
315 * mmc_init, which would block on polling OCR status and complete the device
318 * @param mmc Pointer to a MMC device struct
319 * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error.
321 int mmc_start_init(struct mmc *mmc);
324 * Set preinit flag of mmc device.
326 * This will cause the device to be pre-inited during mmc_initialize(),
327 * which may save boot time if the device is not accessed until later.
328 * Some eMMC devices take 200-300ms to init, but unfortunately they
329 * must be sent a series of commands to even get them to start preparing
332 * @param mmc Pointer to a MMC device struct
333 * @param preinit preinit flag value
335 void mmc_set_preinit(struct mmc *mmc, int preinit);
337 #ifdef CONFIG_GENERIC_MMC
338 #ifdef CONFIG_MMC_SPI
339 #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI)
341 #define mmc_host_is_spi(mmc) 0
343 struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
345 int mmc_legacy_init(int verbose);