ARM: rmobile: salvator-x: Adjust UART clock
[platform/kernel/u-boot.git] / include / mb862xx.h
1 /*
2  * (C) Copyright 2007
3  * DENX Software Engineering, Anatolij Gustschin, agust@denx.de
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /*
9  * mb862xx.h - Graphic interface for Fujitsu CoralP/Lime
10  */
11
12 #ifndef _MB862XX_H_
13 #define _MB862XX_H_
14
15 #define PCI_VENDOR_ID_FUJITSU   0x10CF
16 #define PCI_DEVICE_ID_CORAL_P   0x2019
17 #define PCI_DEVICE_ID_CORAL_PA  0x201E
18
19 #define MB862XX_TYPE_LIME       0x1
20
21 #define GC_HOST_BASE            0x01fc0000
22 #define GC_DISP_BASE            0x01fd0000
23 #define GC_DRAW_BASE            0x01ff0000
24
25 /* Host interface registers */
26 #define GC_SRST                 0x0000002c
27 #define GC_CCF                  0x00000038
28 #define GC_CID                  0x000000f0
29 #define GC_MMR                  0x0000fffc
30
31 /*
32  * Display Controller registers
33  * _A means the offset is aligned, we use these for boards
34  * with 8-/16-bit GDC access not working or buggy.
35  */
36 #define GC_DCM0                 0x00000000
37 #define GC_HTP_A                0x00000004
38 #define GC_HTP                  0x00000006
39 #define GC_HDB_HDP_A            0x00000008
40 #define GC_HDP                  0x00000008
41 #define GC_HDB                  0x0000000a
42 #define GC_VSW_HSW_HSP_A        0x0000000c
43 #define GC_HSP                  0x0000000c
44 #define GC_HSW                  0x0000000e
45 #define GC_VSW                  0x0000000f
46 #define GC_VTR_A                0x00000010
47 #define GC_VTR                  0x00000012
48 #define GC_VDP_VSP_A            0x00000014
49 #define GC_VSP                  0x00000014
50 #define GC_VDP                  0x00000016
51 #define GC_WY_WX                0x00000018
52 #define GC_WH_WW                0x0000001c
53 #define GC_L0M                  0x00000020
54 #define GC_L0OA0                0x00000024
55 #define GC_L0DA0                0x00000028
56 #define GC_L0DY_L0DX            0x0000002c
57 #define GC_L2M                  0x00000040
58 #define GC_L2OA0                0x00000044
59 #define GC_L2DA0                0x00000048
60 #define GC_L2OA1                0x0000004c
61 #define GC_L2DA1                0x00000050
62 #define GC_L2DX                 0x00000054
63 #define GC_L2DY                 0x00000056
64 #define GC_DCM1                 0x00000100
65 #define GC_DCM2                 0x00000104
66 #define GC_DCM3                 0x00000108
67 #define GC_L0EM                 0x00000110
68 #define GC_L0WY_L0WX            0x00000114
69 #define GC_L0WH_L0WW            0x00000118
70 #define GC_L2EM                 0x00000130
71 #define GC_L2WX                 0x00000134
72 #define GC_L2WY                 0x00000136
73 #define GC_L2WW                 0x00000138
74 #define GC_L2WH                 0x0000013a
75 #define GC_L0PAL0               0x00000400
76
77 /* Drawing registers */
78 #define GC_CTR                  0x00000400
79 #define GC_IFCNT                0x00000408
80 #define GC_FBR                  0x00000440
81 #define GC_XRES                 0x00000444
82 #define GC_CXMIN                0x00000454
83 #define GC_CXMAX                0x00000458
84 #define GC_CYMIN                0x0000045c
85 #define GC_CYMAX                0x00000460
86 #define GC_FC                   0x00000480
87 #define GC_BC                   0x00000484
88 #define GC_FIFO                 0x000004a0
89 #define GC_REV                  0x00008084
90 #define GC_GEO_FIFO             0x00008400
91
92 typedef struct {
93         unsigned int index;
94         unsigned int value;
95 } gdc_regs;
96
97 int mb862xx_probe(unsigned int addr);
98 const gdc_regs *board_get_regs (void);
99 unsigned int board_video_init (void);
100 void board_backlight_switch(int);
101
102 #endif /* _MB862XX_H_ */