1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * composite.h -- framework for usb gadgets which are composite devices
5 * Copyright (C) 2006-2008 David Brownell
8 #ifndef __LINUX_USB_COMPOSITE_H
9 #define __LINUX_USB_COMPOSITE_H
12 * This framework is an optional layer on top of the USB Gadget interface,
13 * making it easier to build (a) Composite devices, supporting multiple
14 * functions within any single configuration, and (b) Multi-configuration
15 * devices, also supporting multiple functions but without necessarily
16 * having more than one function per configuration.
18 * Example: a device with a single configuration supporting both network
19 * link and mass storage functions is a composite device. Those functions
20 * might alternatively be packaged in individual configurations, but in
21 * the composite model the host can use both functions at the same time.
25 #include <linux/usb/ch9.h>
26 #include <linux/usb/gadget.h>
27 #include <linux/bitmap.h>
30 * USB function drivers should return USB_GADGET_DELAYED_STATUS if they
31 * wish to delay the data/status stages of the control transfer till they
32 * are ready. The control transfer will then be kept from completing till
33 * all the function drivers that requested for USB_GADGET_DELAYED_STAUS
34 * invoke usb_composite_setup_continue().
36 #define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */
38 struct usb_configuration;
41 * struct usb_os_desc_ext_prop - describes one "Extended Property"
42 * @entry: used to keep a list of extended properties
43 * @type: Extended Property type
44 * @name_len: Extended Property unicode name length, including terminating '\0'
45 * @name: Extended Property name
46 * @data_len: Length of Extended Property blob (for unicode store double len)
47 * @data: Extended Property blob
49 struct usb_os_desc_ext_prop {
50 struct list_head entry;
59 * struct usb_os_desc - describes OS descriptors associated with one interface
60 * @ext_compat_id: 16 bytes of "Compatible ID" and "Subcompatible ID"
61 * @ext_prop: Extended Properties list
62 * @ext_prop_len: Total length of Extended Properties blobs
63 * @ext_prop_count: Number of Extended Properties
67 struct list_head ext_prop;
73 * struct usb_os_desc_table - describes OS descriptors associated with one
74 * interface of a usb_function
75 * @if_id: Interface id
76 * @os_desc: "Extended Compatibility ID" and "Extended Properties" of the
79 * Each interface can have at most one "Extended Compatibility ID" and a
80 * number of "Extended Properties".
82 struct usb_os_desc_table {
84 struct usb_os_desc *os_desc;
88 * struct usb_function - describes one function of a configuration
89 * @name: For diagnostics, identifies the function.
90 * @strings: tables of strings, keyed by identifiers assigned during bind()
91 * and by language IDs provided in control requests
92 * @descriptors: Table of full (or low) speed descriptors, using interface and
93 * string identifiers assigned during @bind(). If this pointer is null,
94 * the function will not be available at full speed (or at low speed).
95 * @hs_descriptors: Table of high speed descriptors, using interface and
96 * string identifiers assigned during @bind(). If this pointer is null,
97 * the function will not be available at high speed.
98 * @config: assigned when @usb_add_function() is called; this is the
99 * configuration with which this function is associated.
100 * @os_desc_table: Table of (interface id, os descriptors) pairs. The function
101 * can expose more than one interface. If an interface is a member of
102 * an IAD, only the first interface of IAD has its entry in the table.
103 * @os_desc_n: Number of entries in os_desc_table
104 * @bind: Before the gadget can register, all of its functions bind() to the
105 * available resources including string and interface identifiers used
106 * in interface or class descriptors; endpoints; I/O buffers; and so on.
107 * @unbind: Reverses @bind; called as a side effect of unregistering the
108 * driver which added this function.
109 * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
110 * initialize usb_ep.driver data at this time (when it is used).
111 * Note that setting an interface to its current altsetting resets
112 * interface state, and that all interfaces have a disabled state.
113 * @get_alt: Returns the active altsetting. If this is not provided,
114 * then only altsetting zero is supported.
115 * @disable: (REQUIRED) Indicates the function should be disabled. Reasons
116 * include host resetting or reconfiguring the gadget, and disconnection.
117 * @setup: Used for interface-specific control requests.
118 * @suspend: Notifies functions when the host stops sending USB traffic.
119 * @resume: Notifies functions when the host restarts USB traffic.
121 * A single USB function uses one or more interfaces, and should in most
122 * cases support operation at both full and high speeds. Each function is
123 * associated by @usb_add_function() with a one configuration; that function
124 * causes @bind() to be called so resources can be allocated as part of
125 * setting up a gadget driver. Those resources include endpoints, which
126 * should be allocated using @usb_ep_autoconfig().
128 * To support dual speed operation, a function driver provides descriptors
129 * for both high and full speed operation. Except in rare cases that don't
130 * involve bulk endpoints, each speed needs different endpoint descriptors.
132 * Function drivers choose their own strategies for managing instance data.
133 * The simplest strategy just declares it "static', which means the function
134 * can only be activated once. If the function needs to be exposed in more
135 * than one configuration at a given speed, it needs to support multiple
136 * usb_function structures (one for each configuration).
138 * A more complex strategy might encapsulate a @usb_function structure inside
139 * a driver-specific instance structure to allows multiple activations. An
140 * example of multiple activations might be a CDC ACM function that supports
141 * two or more distinct instances within the same configuration, providing
142 * several independent logical data links to a USB host.
144 struct usb_function {
146 struct usb_gadget_strings **strings;
147 struct usb_descriptor_header **descriptors;
148 struct usb_descriptor_header **hs_descriptors;
149 struct usb_descriptor_header **ss_descriptors;
151 struct usb_configuration *config;
153 struct usb_os_desc_table *os_desc_table;
156 /* REVISIT: bind() functions can be marked __init, which
157 * makes trouble for section mismatch analysis. See if
158 * we can't restructure things to avoid mismatching.
159 * Related: unbind() may kfree() but bind() won't...
162 /* configuration management: bind/unbind */
163 int (*bind)(struct usb_configuration *,
164 struct usb_function *);
165 void (*unbind)(struct usb_configuration *,
166 struct usb_function *);
168 /* runtime state management */
169 int (*set_alt)(struct usb_function *,
170 unsigned interface, unsigned alt);
171 int (*get_alt)(struct usb_function *,
173 void (*disable)(struct usb_function *);
174 int (*setup)(struct usb_function *,
175 const struct usb_ctrlrequest *);
176 void (*suspend)(struct usb_function *);
177 void (*resume)(struct usb_function *);
181 struct list_head list;
182 DECLARE_BITMAP(endpoints, 32);
185 int usb_add_function(struct usb_configuration *, struct usb_function *);
187 int usb_function_deactivate(struct usb_function *);
188 int usb_function_activate(struct usb_function *);
190 int usb_interface_id(struct usb_configuration *, struct usb_function *);
193 * ep_choose - select descriptor endpoint at current device speed
194 * @g: gadget, connected and running at some speed
195 * @hs: descriptor to use for high speed operation
196 * @fs: descriptor to use for full or low speed operation
198 static inline struct usb_endpoint_descriptor *
199 ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
200 struct usb_endpoint_descriptor *fs)
202 if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
207 #define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */
210 * struct usb_configuration - represents one gadget configuration
211 * @label: For diagnostics, describes the configuration.
212 * @strings: Tables of strings, keyed by identifiers assigned during @bind()
213 * and by language IDs provided in control requests.
214 * @descriptors: Table of descriptors preceding all function descriptors.
215 * Examples include OTG and vendor-specific descriptors.
216 * @bind: Called from @usb_add_config() to allocate resources unique to this
217 * configuration and to call @usb_add_function() for each function used.
218 * @unbind: Reverses @bind; called as a side effect of unregistering the
219 * driver which added this configuration.
220 * @setup: Used to delegate control requests that aren't handled by standard
221 * device infrastructure or directed at a specific interface.
222 * @bConfigurationValue: Copied into configuration descriptor.
223 * @iConfiguration: Copied into configuration descriptor.
224 * @bmAttributes: Copied into configuration descriptor.
225 * @bMaxPower: Copied into configuration descriptor.
226 * @cdev: assigned by @usb_add_config() before calling @bind(); this is
227 * the device associated with this configuration.
229 * Configurations are building blocks for gadget drivers structured around
230 * function drivers. Simple USB gadgets require only one function and one
231 * configuration, and handle dual-speed hardware by always providing the same
232 * functionality. Slightly more complex gadgets may have more than one
233 * single-function configuration at a given speed; or have configurations
234 * that only work at one speed.
236 * Composite devices are, by definition, ones with configurations which
237 * include more than one function.
239 * The lifecycle of a usb_configuration includes allocation, initialization
240 * of the fields described above, and calling @usb_add_config() to set up
241 * internal data and bind it to a specific device. The configuration's
242 * @bind() method is then used to initialize all the functions and then
243 * call @usb_add_function() for them.
245 * Those functions would normally be independant of each other, but that's
246 * not mandatory. CDC WMC devices are an example where functions often
247 * depend on other functions, with some functions subsidiary to others.
248 * Such interdependency may be managed in any way, so long as all of the
249 * descriptors complete by the time the composite driver returns from
250 * its bind() routine.
252 struct usb_configuration {
254 struct usb_gadget_strings **strings;
255 const struct usb_descriptor_header **descriptors;
257 /* REVISIT: bind() functions can be marked __init, which
258 * makes trouble for section mismatch analysis. See if
259 * we can't restructure things to avoid mismatching...
262 /* configuration management: bind/unbind */
263 int (*bind)(struct usb_configuration *);
264 void (*unbind)(struct usb_configuration *);
265 int (*setup)(struct usb_configuration *,
266 const struct usb_ctrlrequest *);
268 /* fields in the config descriptor */
269 u8 bConfigurationValue;
274 struct usb_composite_dev *cdev;
278 struct list_head list;
279 struct list_head functions;
280 u8 next_interface_id;
281 unsigned highspeed:1;
282 unsigned fullspeed:1;
283 unsigned superspeed:1;
284 struct usb_function *interface[MAX_CONFIG_INTERFACES];
287 int usb_add_config(struct usb_composite_dev *,
288 struct usb_configuration *);
291 * struct usb_composite_driver - groups configurations into a gadget
292 * @name: For diagnostics, identifies the driver.
293 * @dev: Template descriptor for the device, including default device
295 * @strings: tables of strings, keyed by identifiers assigned during bind()
296 * and language IDs provided in control requests
297 * @max_speed: Highest speed the driver supports.
298 * @bind: (REQUIRED) Used to allocate resources that are shared across the
299 * whole device, such as string IDs, and add its configurations using
300 * @usb_add_config(). This may fail by returning a negative errno
301 * value; it should return zero on successful initialization.
302 * @unbind: Reverses @bind(); called as a side effect of unregistering
304 * @disconnect: optional driver disconnect method
305 * @suspend: Notifies when the host stops sending USB traffic,
306 * after function notifications
307 * @resume: Notifies configuration when the host restarts USB traffic,
308 * before function notifications
310 * Devices default to reporting self powered operation. Devices which rely
311 * on bus powered operation should report this in their @bind() method.
313 * Before returning from @bind, various fields in the template descriptor
314 * may be overridden. These include the idVendor/idProduct/bcdDevice values
315 * normally to bind the appropriate host side driver, and the three strings
316 * (iManufacturer, iProduct, iSerialNumber) normally used to provide user
317 * meaningful device identifiers. (The strings will not be defined unless
318 * they are defined in @dev and @strings.) The correct ep0 maxpacket size
319 * is also reported, as defined by the underlying controller driver.
321 struct usb_composite_driver {
323 const struct usb_device_descriptor *dev;
324 struct usb_gadget_strings **strings;
325 enum usb_device_speed max_speed;
327 /* REVISIT: bind() functions can be marked __init, which
328 * makes trouble for section mismatch analysis. See if
329 * we can't restructure things to avoid mismatching...
332 int (*bind)(struct usb_composite_dev *);
333 int (*unbind)(struct usb_composite_dev *);
335 void (*disconnect)(struct usb_composite_dev *);
337 /* global suspend hooks */
338 void (*suspend)(struct usb_composite_dev *);
339 void (*resume)(struct usb_composite_dev *);
342 extern int usb_composite_register(struct usb_composite_driver *);
343 extern void usb_composite_unregister(struct usb_composite_driver *);
345 #define OS_STRING_QW_SIGN_LEN 14
346 #define OS_STRING_IDX 0xEE
349 * struct usb_composite_device - represents one composite usb gadget
350 * @gadget: read-only, abstracts the gadget's usb peripheral controller
351 * @req: used for control responses; buffer is pre-allocated
352 * @bufsiz: size of buffer pre-allocated in @req
353 * @os_desc_req: used for OS descriptors responses; buffer is pre-allocated
354 * @config: the currently active configuration
355 * @qw_sign: qwSignature part of the OS string
356 * @b_vendor_code: bMS_VendorCode part of the OS string
357 * @use_os_string: false by default, interested gadgets set it
358 * @os_desc_config: the configuration to be used with OS descriptors
360 * One of these devices is allocated and initialized before the
361 * associated device driver's bind() is called.
363 * OPEN ISSUE: it appears that some WUSB devices will need to be
364 * built by combining a normal (wired) gadget with a wireless one.
365 * This revision of the gadget framework should probably try to make
366 * sure doing that won't hurt too much.
368 * One notion for how to handle Wireless USB devices involves:
369 * (a) a second gadget here, discovery mechanism TBD, but likely
370 * needing separate "register/unregister WUSB gadget" calls;
371 * (b) updates to usb_gadget to include flags "is it wireless",
372 * "is it wired", plus (presumably in a wrapper structure)
373 * bandgroup and PHY info;
374 * (c) presumably a wireless_ep wrapping a usb_ep, and reporting
375 * wireless-specific parameters like maxburst and maxsequence;
376 * (d) configurations that are specific to wireless links;
377 * (e) function drivers that understand wireless configs and will
378 * support wireless for (additional) function instances;
379 * (f) a function to support association setup (like CBAF), not
380 * necessarily requiring a wireless adapter;
381 * (g) composite device setup that can create one or more wireless
382 * configs, including appropriate association setup support;
385 struct usb_composite_dev {
386 struct usb_gadget *gadget;
387 struct usb_request *req;
390 struct usb_configuration *config;
392 /* OS String is a custom (yet popular) extension to the USB standard. */
393 u8 qw_sign[OS_STRING_QW_SIGN_LEN];
395 struct usb_configuration *os_desc_config;
396 unsigned int use_os_string:1;
400 unsigned int suspended:1;
401 struct usb_device_descriptor __aligned(CONFIG_SYS_CACHELINE_SIZE) desc;
402 struct list_head configs;
403 struct usb_composite_driver *driver;
406 /* the gadget driver won't enable the data pullup
407 * while the deactivation count is nonzero.
409 unsigned deactivations;
412 extern int usb_string_id(struct usb_composite_dev *c);
413 extern int usb_string_ids_tab(struct usb_composite_dev *c,
414 struct usb_string *str);
415 extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
417 #endif /* __LINUX_USB_COMPOSITE_H */