1 #ifndef _LINUX_SUSPEND_H
2 #define _LINUX_SUSPEND_H
4 #include <linux/swap.h>
5 #include <linux/notifier.h>
6 #include <linux/init.h>
9 #include <linux/freezer.h>
10 #include <asm/errno.h>
13 extern void pm_set_vt_switch(int);
15 static inline void pm_set_vt_switch(int do_switch)
20 #ifdef CONFIG_VT_CONSOLE_SLEEP
21 extern void pm_prepare_console(void);
22 extern void pm_restore_console(void);
24 static inline void pm_prepare_console(void)
28 static inline void pm_restore_console(void)
33 typedef int __bitwise suspend_state_t;
35 #define PM_SUSPEND_ON ((__force suspend_state_t) 0)
36 #define PM_SUSPEND_FREEZE ((__force suspend_state_t) 1)
37 #define PM_SUSPEND_STANDBY ((__force suspend_state_t) 2)
38 #define PM_SUSPEND_MEM ((__force suspend_state_t) 3)
39 #define PM_SUSPEND_MIN PM_SUSPEND_FREEZE
40 #define PM_SUSPEND_MAX ((__force suspend_state_t) 4)
42 enum suspend_stat_step {
47 SUSPEND_SUSPEND_NOIRQ,
53 struct suspend_stats {
59 int failed_suspend_late;
60 int failed_suspend_noirq;
62 int failed_resume_early;
63 int failed_resume_noirq;
64 #define REC_FAILED_NUM 2
66 char failed_devs[REC_FAILED_NUM][40];
67 int last_failed_errno;
68 int errno[REC_FAILED_NUM];
70 enum suspend_stat_step failed_steps[REC_FAILED_NUM];
73 extern struct suspend_stats suspend_stats;
75 static inline void dpm_save_failed_dev(const char *name)
77 strlcpy(suspend_stats.failed_devs[suspend_stats.last_failed_dev],
79 sizeof(suspend_stats.failed_devs[0]));
80 suspend_stats.last_failed_dev++;
81 suspend_stats.last_failed_dev %= REC_FAILED_NUM;
84 static inline void dpm_save_failed_errno(int err)
86 suspend_stats.errno[suspend_stats.last_failed_errno] = err;
87 suspend_stats.last_failed_errno++;
88 suspend_stats.last_failed_errno %= REC_FAILED_NUM;
91 static inline void dpm_save_failed_step(enum suspend_stat_step step)
93 suspend_stats.failed_steps[suspend_stats.last_failed_step] = step;
94 suspend_stats.last_failed_step++;
95 suspend_stats.last_failed_step %= REC_FAILED_NUM;
99 * struct platform_suspend_ops - Callbacks for managing platform dependent
100 * system sleep states.
102 * @valid: Callback to determine if given system sleep state is supported by
104 * Valid (ie. supported) states are advertised in /sys/power/state. Note
105 * that it still may be impossible to enter given system sleep state if the
106 * conditions aren't right.
107 * There is the %suspend_valid_only_mem function available that can be
108 * assigned to this if the platform only supports mem sleep.
110 * @begin: Initialise a transition to given system sleep state.
111 * @begin() is executed right prior to suspending devices. The information
112 * conveyed to the platform code by @begin() should be disregarded by it as
113 * soon as @end() is executed. If @begin() fails (ie. returns nonzero),
114 * @prepare(), @enter() and @finish() will not be called by the PM core.
115 * This callback is optional. However, if it is implemented, the argument
116 * passed to @enter() is redundant and should be ignored.
118 * @prepare: Prepare the platform for entering the system sleep state indicated
120 * @prepare() is called right after devices have been suspended (ie. the
121 * appropriate .suspend() method has been executed for each device) and
122 * before device drivers' late suspend callbacks are executed. It returns
123 * 0 on success or a negative error code otherwise, in which case the
124 * system cannot enter the desired sleep state (@prepare_late(), @enter(),
125 * and @wake() will not be called in that case).
127 * @prepare_late: Finish preparing the platform for entering the system sleep
128 * state indicated by @begin().
129 * @prepare_late is called before disabling nonboot CPUs and after
130 * device drivers' late suspend callbacks have been executed. It returns
131 * 0 on success or a negative error code otherwise, in which case the
132 * system cannot enter the desired sleep state (@enter() will not be
135 * @enter: Enter the system sleep state indicated by @begin() or represented by
136 * the argument if @begin() is not implemented.
137 * This callback is mandatory. It returns 0 on success or a negative
138 * error code otherwise, in which case the system cannot enter the desired
141 * @wake: Called when the system has just left a sleep state, right after
142 * the nonboot CPUs have been enabled and before device drivers' early
143 * resume callbacks are executed.
144 * This callback is optional, but should be implemented by the platforms
145 * that implement @prepare_late(). If implemented, it is always called
146 * after @prepare_late and @enter(), even if one of them fails.
148 * @finish: Finish wake-up of the platform.
149 * @finish is called right prior to calling device drivers' regular suspend
151 * This callback is optional, but should be implemented by the platforms
152 * that implement @prepare(). If implemented, it is always called after
153 * @enter() and @wake(), even if any of them fails. It is executed after
154 * a failing @prepare.
156 * @suspend_again: Returns whether the system should suspend again (true) or
157 * not (false). If the platform wants to poll sensors or execute some
158 * code during suspended without invoking userspace and most of devices,
159 * suspend_again callback is the place assuming that periodic-wakeup or
160 * alarm-wakeup is already setup. This allows to execute some codes while
161 * being kept suspended in the view of userland and devices.
163 * @end: Called by the PM core right after resuming devices, to indicate to
164 * the platform that the system has returned to the working state or
165 * the transition to the sleep state has been aborted.
166 * This callback is optional, but should be implemented by the platforms
167 * that implement @begin(). Accordingly, platforms implementing @begin()
168 * should also provide a @end() which cleans up transitions aborted before
171 * @recover: Recover the platform from a suspend failure.
172 * Called by the PM core if the suspending of devices fails.
173 * This callback is optional and should only be implemented by platforms
174 * which require special recovery actions in that situation.
176 struct platform_suspend_ops {
177 int (*valid)(suspend_state_t state);
178 int (*begin)(suspend_state_t state);
179 int (*prepare)(void);
180 int (*prepare_late)(void);
181 int (*enter)(suspend_state_t state);
183 void (*finish)(void);
184 bool (*suspend_again)(void);
186 void (*recover)(void);
189 struct platform_freeze_ops {
191 int (*prepare)(void);
192 void (*restore)(void);
196 #ifdef CONFIG_SUSPEND
198 * suspend_set_ops - set platform dependent suspend operations
199 * @ops: The new suspend operations to set.
201 extern void suspend_set_ops(const struct platform_suspend_ops *ops);
202 extern int suspend_valid_only_mem(suspend_state_t state);
204 extern unsigned int pm_suspend_global_flags;
206 #define PM_SUSPEND_FLAG_FW_SUSPEND (1 << 0)
207 #define PM_SUSPEND_FLAG_FW_RESUME (1 << 1)
209 static inline void pm_suspend_clear_flags(void)
211 pm_suspend_global_flags = 0;
214 static inline void pm_set_suspend_via_firmware(void)
216 pm_suspend_global_flags |= PM_SUSPEND_FLAG_FW_SUSPEND;
219 static inline void pm_set_resume_via_firmware(void)
221 pm_suspend_global_flags |= PM_SUSPEND_FLAG_FW_RESUME;
224 static inline bool pm_suspend_via_firmware(void)
226 return !!(pm_suspend_global_flags & PM_SUSPEND_FLAG_FW_SUSPEND);
229 static inline bool pm_resume_via_firmware(void)
231 return !!(pm_suspend_global_flags & PM_SUSPEND_FLAG_FW_RESUME);
234 /* Suspend-to-idle state machnine. */
236 FREEZE_STATE_NONE, /* Not suspended/suspending. */
237 FREEZE_STATE_ENTER, /* Enter suspend-to-idle. */
238 FREEZE_STATE_WAKE, /* Wake up from suspend-to-idle. */
241 extern enum freeze_state __read_mostly suspend_freeze_state;
243 static inline bool idle_should_freeze(void)
245 return unlikely(suspend_freeze_state == FREEZE_STATE_ENTER);
248 extern void freeze_set_ops(const struct platform_freeze_ops *ops);
249 extern void freeze_wake(void);
252 * arch_suspend_disable_irqs - disable IRQs for suspend
254 * Disables IRQs (in the default case). This is a weak symbol in the common
255 * code and thus allows architectures to override it if more needs to be
256 * done. Not called for suspend to disk.
258 extern void arch_suspend_disable_irqs(void);
261 * arch_suspend_enable_irqs - enable IRQs after suspend
263 * Enables IRQs (in the default case). This is a weak symbol in the common
264 * code and thus allows architectures to override it if more needs to be
265 * done. Not called for suspend to disk.
267 extern void arch_suspend_enable_irqs(void);
269 extern int pm_suspend(suspend_state_t state);
270 #else /* !CONFIG_SUSPEND */
271 #define suspend_valid_only_mem NULL
273 static inline void pm_suspend_clear_flags(void) {}
274 static inline void pm_set_suspend_via_firmware(void) {}
275 static inline void pm_set_resume_via_firmware(void) {}
276 static inline bool pm_suspend_via_firmware(void) { return false; }
277 static inline bool pm_resume_via_firmware(void) { return false; }
279 static inline void suspend_set_ops(const struct platform_suspend_ops *ops) {}
280 static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; }
281 static inline bool idle_should_freeze(void) { return false; }
282 static inline void freeze_set_ops(const struct platform_freeze_ops *ops) {}
283 static inline void freeze_wake(void) {}
284 #endif /* !CONFIG_SUSPEND */
286 /* struct pbe is used for creating lists of pages that should be restored
287 * atomically during the resume from disk, because the page frames they have
288 * occupied before the suspend are in use.
291 void *address; /* address of the copy */
292 void *orig_address; /* original address of a page */
296 /* mm/page_alloc.c */
297 extern void mark_free_pages(struct zone *zone);
300 * struct platform_hibernation_ops - hibernation platform support
302 * The methods in this structure allow a platform to carry out special
303 * operations required by it during a hibernation transition.
305 * All the methods below, except for @recover(), must be implemented.
307 * @begin: Tell the platform driver that we're starting hibernation.
308 * Called right after shrinking memory and before freezing devices.
310 * @end: Called by the PM core right after resuming devices, to indicate to
311 * the platform that the system has returned to the working state.
313 * @pre_snapshot: Prepare the platform for creating the hibernation image.
314 * Called right after devices have been frozen and before the nonboot
315 * CPUs are disabled (runs with IRQs on).
317 * @finish: Restore the previous state of the platform after the hibernation
318 * image has been created *or* put the platform into the normal operation
319 * mode after the hibernation (the same method is executed in both cases).
320 * Called right after the nonboot CPUs have been enabled and before
321 * thawing devices (runs with IRQs on).
323 * @prepare: Prepare the platform for entering the low power state.
324 * Called right after the hibernation image has been saved and before
325 * devices are prepared for entering the low power state.
327 * @enter: Put the system into the low power state after the hibernation image
328 * has been saved to disk.
329 * Called after the nonboot CPUs have been disabled and all of the low
330 * level devices have been shut down (runs with IRQs off).
332 * @leave: Perform the first stage of the cleanup after the system sleep state
333 * indicated by @set_target() has been left.
334 * Called right after the control has been passed from the boot kernel to
335 * the image kernel, before the nonboot CPUs are enabled and before devices
336 * are resumed. Executed with interrupts disabled.
338 * @pre_restore: Prepare system for the restoration from a hibernation image.
339 * Called right after devices have been frozen and before the nonboot
340 * CPUs are disabled (runs with IRQs on).
342 * @restore_cleanup: Clean up after a failing image restoration.
343 * Called right after the nonboot CPUs have been enabled and before
344 * thawing devices (runs with IRQs on).
346 * @recover: Recover the platform from a failure to suspend devices.
347 * Called by the PM core if the suspending of devices during hibernation
348 * fails. This callback is optional and should only be implemented by
349 * platforms which require special recovery actions in that situation.
351 struct platform_hibernation_ops {
354 int (*pre_snapshot)(void);
355 void (*finish)(void);
356 int (*prepare)(void);
359 int (*pre_restore)(void);
360 void (*restore_cleanup)(void);
361 void (*recover)(void);
364 #ifdef CONFIG_HIBERNATION
365 /* kernel/power/snapshot.c */
366 extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
367 static inline void __init register_nosave_region(unsigned long b, unsigned long e)
369 __register_nosave_region(b, e, 0);
371 static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
373 __register_nosave_region(b, e, 1);
375 extern int swsusp_page_is_forbidden(struct page *);
376 extern void swsusp_set_page_free(struct page *);
377 extern void swsusp_unset_page_free(struct page *);
378 extern unsigned long get_safe_page(gfp_t gfp_mask);
380 extern void hibernation_set_ops(const struct platform_hibernation_ops *ops);
381 extern int hibernate(void);
382 extern bool system_entering_hibernation(void);
383 extern bool hibernation_available(void);
384 asmlinkage int swsusp_save(void);
385 extern struct pbe *restore_pblist;
386 #else /* CONFIG_HIBERNATION */
387 static inline void register_nosave_region(unsigned long b, unsigned long e) {}
388 static inline void register_nosave_region_late(unsigned long b, unsigned long e) {}
389 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
390 static inline void swsusp_set_page_free(struct page *p) {}
391 static inline void swsusp_unset_page_free(struct page *p) {}
393 static inline void hibernation_set_ops(const struct platform_hibernation_ops *ops) {}
394 static inline int hibernate(void) { return -ENOSYS; }
395 static inline bool system_entering_hibernation(void) { return false; }
396 static inline bool hibernation_available(void) { return false; }
397 #endif /* CONFIG_HIBERNATION */
399 /* Hibernation and suspend events */
400 #define PM_HIBERNATION_PREPARE 0x0001 /* Going to hibernate */
401 #define PM_POST_HIBERNATION 0x0002 /* Hibernation finished */
402 #define PM_SUSPEND_PREPARE 0x0003 /* Going to suspend the system */
403 #define PM_POST_SUSPEND 0x0004 /* Suspend finished */
404 #define PM_RESTORE_PREPARE 0x0005 /* Going to restore a saved image */
405 #define PM_POST_RESTORE 0x0006 /* Restore failed */
407 extern struct mutex pm_mutex;
409 #ifdef CONFIG_PM_SLEEP
410 void save_processor_state(void);
411 void restore_processor_state(void);
413 /* kernel/power/main.c */
414 extern int register_pm_notifier(struct notifier_block *nb);
415 extern int unregister_pm_notifier(struct notifier_block *nb);
417 #define pm_notifier(fn, pri) { \
418 static struct notifier_block fn##_nb = \
419 { .notifier_call = fn, .priority = pri }; \
420 register_pm_notifier(&fn##_nb); \
423 /* drivers/base/power/wakeup.c */
424 extern bool events_check_enabled;
425 extern unsigned int pm_wakeup_irq;
427 extern bool pm_wakeup_pending(void);
428 extern void pm_system_wakeup(void);
429 extern void pm_wakeup_clear(void);
430 extern void pm_system_irq_wakeup(unsigned int irq_number);
431 extern bool pm_get_wakeup_count(unsigned int *count, bool block);
432 extern bool pm_save_wakeup_count(unsigned int count);
433 extern void pm_wakep_autosleep_enabled(bool set);
434 extern void pm_print_active_wakeup_sources(void);
436 static inline void lock_system_sleep(void)
438 current->flags |= PF_FREEZER_SKIP;
439 mutex_lock(&pm_mutex);
442 static inline void unlock_system_sleep(void)
445 * Don't use freezer_count() because we don't want the call to
446 * try_to_freeze() here.
449 * Fundamentally, we just don't need it, because freezing condition
450 * doesn't come into effect until we release the pm_mutex lock,
451 * since the freezer always works with pm_mutex held.
453 * More importantly, in the case of hibernation,
454 * unlock_system_sleep() gets called in snapshot_read() and
455 * snapshot_write() when the freezing condition is still in effect.
456 * Which means, if we use try_to_freeze() here, it would make them
457 * enter the refrigerator, thus causing hibernation to lockup.
459 current->flags &= ~PF_FREEZER_SKIP;
460 mutex_unlock(&pm_mutex);
463 #else /* !CONFIG_PM_SLEEP */
465 static inline int register_pm_notifier(struct notifier_block *nb)
470 static inline int unregister_pm_notifier(struct notifier_block *nb)
475 #define pm_notifier(fn, pri) do { (void)(fn); } while (0)
477 static inline bool pm_wakeup_pending(void) { return false; }
478 static inline void pm_system_wakeup(void) {}
479 static inline void pm_wakeup_clear(void) {}
480 static inline void pm_system_irq_wakeup(unsigned int irq_number) {}
482 static inline void lock_system_sleep(void) {}
483 static inline void unlock_system_sleep(void) {}
485 #endif /* !CONFIG_PM_SLEEP */
487 #ifdef CONFIG_PM_SLEEP_DEBUG
488 extern bool pm_print_times_enabled;
490 #define pm_print_times_enabled (false)
493 #ifdef CONFIG_PM_AUTOSLEEP
495 /* kernel/power/autosleep.c */
496 void queue_up_suspend_work(void);
498 #else /* !CONFIG_PM_AUTOSLEEP */
500 static inline void queue_up_suspend_work(void) {}
502 #endif /* !CONFIG_PM_AUTOSLEEP */
504 #ifdef CONFIG_ARCH_SAVE_PAGE_KEYS
506 * The ARCH_SAVE_PAGE_KEYS functions can be used by an architecture
507 * to save/restore additional information to/from the array of page
508 * frame numbers in the hibernation image. For s390 this is used to
509 * save and restore the storage key for each page that is included
510 * in the hibernation image.
512 unsigned long page_key_additional_pages(unsigned long pages);
513 int page_key_alloc(unsigned long pages);
514 void page_key_free(void);
515 void page_key_read(unsigned long *pfn);
516 void page_key_memorize(unsigned long *pfn);
517 void page_key_write(void *address);
519 #else /* !CONFIG_ARCH_SAVE_PAGE_KEYS */
521 static inline unsigned long page_key_additional_pages(unsigned long pages)
526 static inline int page_key_alloc(unsigned long pages)
531 static inline void page_key_free(void) {}
532 static inline void page_key_read(unsigned long *pfn) {}
533 static inline void page_key_memorize(unsigned long *pfn) {}
534 static inline void page_key_write(void *address) {}
536 #endif /* !CONFIG_ARCH_SAVE_PAGE_KEYS */
538 #endif /* _LINUX_SUSPEND_H */