mmc: tmio: add TMIO_MMC_SDIO_STATUS_QUIRK
[platform/adaptation/renesas_rcar/renesas_kernel.git] / include / linux / mfd / tmio.h
1 #ifndef MFD_TMIO_H
2 #define MFD_TMIO_H
3
4 #include <linux/device.h>
5 #include <linux/fb.h>
6 #include <linux/io.h>
7 #include <linux/jiffies.h>
8 #include <linux/platform_device.h>
9 #include <linux/pm_runtime.h>
10
11 #define tmio_ioread8(addr) readb(addr)
12 #define tmio_ioread16(addr) readw(addr)
13 #define tmio_ioread16_rep(r, b, l) readsw(r, b, l)
14 #define tmio_ioread32(addr) \
15         (((u32) readw((addr))) | (((u32) readw((addr) + 2)) << 16))
16
17 #define tmio_iowrite8(val, addr) writeb((val), (addr))
18 #define tmio_iowrite16(val, addr) writew((val), (addr))
19 #define tmio_iowrite16_rep(r, b, l) writesw(r, b, l)
20 #define tmio_iowrite32(val, addr) \
21         do { \
22         writew((val),       (addr)); \
23         writew((val) >> 16, (addr) + 2); \
24         } while (0)
25
26 #define CNF_CMD     0x04
27 #define CNF_CTL_BASE   0x10
28 #define CNF_INT_PIN  0x3d
29 #define CNF_STOP_CLK_CTL 0x40
30 #define CNF_GCLK_CTL 0x41
31 #define CNF_SD_CLK_MODE 0x42
32 #define CNF_PIN_STATUS 0x44
33 #define CNF_PWR_CTL_1 0x48
34 #define CNF_PWR_CTL_2 0x49
35 #define CNF_PWR_CTL_3 0x4a
36 #define CNF_CARD_DETECT_MODE 0x4c
37 #define CNF_SD_SLOT 0x50
38 #define CNF_EXT_GCLK_CTL_1 0xf0
39 #define CNF_EXT_GCLK_CTL_2 0xf1
40 #define CNF_EXT_GCLK_CTL_3 0xf9
41 #define CNF_SD_LED_EN_1 0xfa
42 #define CNF_SD_LED_EN_2 0xfe
43
44 #define   SDCREN 0x2   /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
45
46 #define sd_config_write8(base, shift, reg, val) \
47         tmio_iowrite8((val), (base) + ((reg) << (shift)))
48 #define sd_config_write16(base, shift, reg, val) \
49         tmio_iowrite16((val), (base) + ((reg) << (shift)))
50 #define sd_config_write32(base, shift, reg, val) \
51         do { \
52                 tmio_iowrite16((val), (base) + ((reg) << (shift)));   \
53                 tmio_iowrite16((val) >> 16, (base) + ((reg + 2) << (shift))); \
54         } while (0)
55
56 /* tmio MMC platform flags */
57 #define TMIO_MMC_WRPROTECT_DISABLE      (1 << 0)
58 /*
59  * Some controllers can support a 2-byte block size when the bus width
60  * is configured in 4-bit mode.
61  */
62 #define TMIO_MMC_BLKSZ_2BYTES           (1 << 1)
63 /*
64  * Some controllers can support SDIO IRQ signalling.
65  */
66 #define TMIO_MMC_SDIO_IRQ               (1 << 2)
67 /*
68  * Some controllers require waiting for the SD bus to become
69  * idle before writing to some registers.
70  */
71 #define TMIO_MMC_HAS_IDLE_WAIT          (1 << 4)
72 /*
73  * A GPIO is used for card hotplug detection. We need an extra flag for this,
74  * because 0 is a valid GPIO number too, and requiring users to specify
75  * cd_gpio < 0 to disable GPIO hotplug would break backwards compatibility.
76  */
77 #define TMIO_MMC_USE_GPIO_CD            (1 << 5)
78
79 /*
80  * Some controllers doesn't have over 0x100 register.
81  * it is used to checking accessibility of
82  * CTL_SD_CARD_CLK_CTL / CTL_CLK_AND_WAIT_CTL
83  */
84 #define TMIO_MMC_HAVE_HIGH_REG          (1 << 6)
85
86 /*
87  * Some controllers have CMD12 automatically
88  * issue/non-issue register
89  */
90 #define TMIO_MMC_HAVE_CMD12_CTRL        (1 << 7)
91
92 /*
93  * Some controllers needs to set 1 on SDIO status reserved bits
94  */
95 #define TMIO_MMC_SDIO_STATUS_QUIRK      (1 << 8)
96
97 int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
98 int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
99 void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
100 void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state);
101
102 struct dma_chan;
103
104 struct tmio_mmc_dma {
105         void *chan_priv_tx;
106         void *chan_priv_rx;
107         int slave_id_tx;
108         int slave_id_rx;
109         int alignment_shift;
110         dma_addr_t dma_rx_offset;
111         bool (*filter)(struct dma_chan *chan, void *arg);
112 };
113
114 struct tmio_mmc_host;
115
116 /*
117  * data for the MMC controller
118  */
119 struct tmio_mmc_data {
120         unsigned int                    hclk;
121         unsigned long                   capabilities;
122         unsigned long                   capabilities2;
123         unsigned long                   flags;
124         unsigned long                   bus_shift;
125         u32                             ocr_mask;       /* available voltages */
126         struct tmio_mmc_dma             *dma;
127         struct device                   *dev;
128         unsigned int                    cd_gpio;
129         void (*set_pwr)(struct platform_device *host, int state);
130         void (*set_clk_div)(struct platform_device *host, int state);
131         int (*write16_hook)(struct tmio_mmc_host *host, int addr);
132         /* clock management callbacks */
133         int (*clk_enable)(struct platform_device *pdev, unsigned int *f);
134         void (*clk_disable)(struct platform_device *pdev);
135 };
136
137 /*
138  * data for the NAND controller
139  */
140 struct tmio_nand_data {
141         struct nand_bbt_descr   *badblock_pattern;
142         struct mtd_partition    *partition;
143         unsigned int            num_partitions;
144 };
145
146 #define FBIO_TMIO_ACC_WRITE     0x7C639300
147 #define FBIO_TMIO_ACC_SYNC      0x7C639301
148
149 struct tmio_fb_data {
150         int                     (*lcd_set_power)(struct platform_device *fb_dev,
151                                                                 bool on);
152         int                     (*lcd_mode)(struct platform_device *fb_dev,
153                                         const struct fb_videomode *mode);
154         int                     num_modes;
155         struct fb_videomode     *modes;
156
157         /* in mm: size of screen */
158         int                     height;
159         int                     width;
160 };
161
162
163 #endif