2 * MPC823 and PXA LCD Controller
4 * Modeled after video interface by Paolo Scaffardi
8 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
10 * See file CREDITS for list of people who contributed to this
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License as
15 * published by the Free Software Foundation; either version 2 of
16 * the License, or (at your option) any later version.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
32 extern char lcd_is_enabled;
34 extern int lcd_line_length;
35 extern int lcd_color_fg;
36 extern int lcd_color_bg;
39 * Frame buffer memory information
41 extern void *lcd_base; /* Start of framebuffer memory */
42 extern void *lcd_console_address; /* Start of console buffer */
44 extern short console_col;
45 extern short console_row;
47 #if defined CONFIG_MPC823
49 * LCD controller stucture for MPC823 CPU
51 typedef struct vidinfo {
52 ushort vl_col; /* Number of columns (i.e. 640) */
53 ushort vl_row; /* Number of rows (i.e. 480) */
54 ushort vl_width; /* Width of display area in millimeters */
55 ushort vl_height; /* Height of display area in millimeters */
57 /* LCD configuration register */
58 u_char vl_clkp; /* Clock polarity */
59 u_char vl_oep; /* Output Enable polarity */
60 u_char vl_hsp; /* Horizontal Sync polarity */
61 u_char vl_vsp; /* Vertical Sync polarity */
62 u_char vl_dp; /* Data polarity */
63 u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
64 u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
65 u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
66 u_char vl_clor; /* Color, 0 = mono, 1 = color */
67 u_char vl_tft; /* 0 = passive, 1 = TFT */
69 /* Horizontal control register. Timing from data sheet */
70 ushort vl_wbl; /* Wait between lines */
72 /* Vertical control register */
73 u_char vl_vpw; /* Vertical sync pulse width */
74 u_char vl_lcdac; /* LCD AC timing */
75 u_char vl_wbf; /* Wait between frames */
78 extern vidinfo_t panel_info;
80 #elif defined CONFIG_PXA250
82 * PXA LCD DMA descriptor
84 struct pxafb_dma_descriptor {
85 u_long fdadr; /* Frame descriptor address register */
86 u_long fsadr; /* Frame source address register */
87 u_long fidr; /* Frame ID register */
88 u_long ldcmd; /* Command register */
104 /* DMA descriptors */
105 struct pxafb_dma_descriptor * dmadesc_fblow;
106 struct pxafb_dma_descriptor * dmadesc_fbhigh;
107 struct pxafb_dma_descriptor * dmadesc_palette;
109 u_long screen; /* physical address of frame buffer */
110 u_long palette; /* physical address of palette memory */
115 * LCD controller stucture for PXA CPU
117 typedef struct vidinfo {
118 ushort vl_col; /* Number of columns (i.e. 640) */
119 ushort vl_row; /* Number of rows (i.e. 480) */
120 ushort vl_width; /* Width of display area in millimeters */
121 ushort vl_height; /* Height of display area in millimeters */
123 /* LCD configuration register */
124 u_char vl_clkp; /* Clock polarity */
125 u_char vl_oep; /* Output Enable polarity */
126 u_char vl_hsp; /* Horizontal Sync polarity */
127 u_char vl_vsp; /* Vertical Sync polarity */
128 u_char vl_dp; /* Data polarity */
129 u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
130 u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
131 u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
132 u_char vl_clor; /* Color, 0 = mono, 1 = color */
133 u_char vl_tft; /* 0 = passive, 1 = TFT */
135 /* Horizontal control register. Timing from data sheet */
136 ushort vl_hpw; /* Horz sync pulse width */
137 u_char vl_blw; /* Wait before of line */
138 u_char vl_elw; /* Wait end of line */
140 /* Vertical control register. */
141 u_char vl_vpw; /* Vertical sync pulse width */
142 u_char vl_bfw; /* Wait before of frame */
143 u_char vl_efw; /* Wait end of frame */
145 /* PXA LCD controller params */
146 struct pxafb_info pxa;
149 extern vidinfo_t panel_info;
151 #elif defined(CONFIG_ATMEL_LCD)
153 typedef struct vidinfo {
154 u_long vl_col; /* Number of columns (i.e. 640) */
155 u_long vl_row; /* Number of rows (i.e. 480) */
156 u_long vl_clk; /* pixel clock in ps */
158 /* LCD configuration register */
159 u_long vl_sync; /* Horizontal / vertical sync */
160 u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
161 u_long vl_tft; /* 0 = passive, 1 = TFT */
163 /* Horizontal control register. */
164 u_long vl_hsync_len; /* Length of horizontal sync */
165 u_long vl_left_margin; /* Time from sync to picture */
166 u_long vl_right_margin; /* Time from picture to sync */
168 /* Vertical control register. */
169 u_long vl_vsync_len; /* Length of vertical sync */
170 u_long vl_upper_margin; /* Time from sync to picture */
171 u_long vl_lower_margin; /* Time from picture to sync */
173 u_long mmio; /* Memory mapped registers */
176 extern vidinfo_t panel_info;
180 typedef struct vidinfo {
181 ushort vl_col; /* Number of columns (i.e. 160) */
182 ushort vl_row; /* Number of rows (i.e. 100) */
184 u_char vl_bpix; /* Bits per pixel, 0 = 1 */
186 ushort *cmap; /* Pointer to the colormap */
188 void *priv; /* Pointer to driver-specific data */
191 #endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
193 /* Video functions */
195 #if defined(CONFIG_RBC823)
196 void lcd_disable (void);
200 /* int lcd_init (void *lcdbase); */
201 void lcd_putc (const char c);
202 void lcd_puts (const char *s);
203 void lcd_printf (const char *fmt, ...);
205 /* Allow boards to customize the information displayed */
206 void lcd_show_board_info(void);
208 /************************************************************************/
209 /* ** BITMAP DISPLAY SUPPORT */
210 /************************************************************************/
211 #if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
212 # include <bmp_layout.h>
213 # include <asm/byteorder.h>
217 * Information about displays we are using. This is for configuring
218 * the LCD controller and memory allocation. Someone has to know what
219 * is connected, as we can't autodetect anything.
221 #define CONFIG_SYS_HIGH 0 /* Pins are active high */
222 #define CONFIG_SYS_LOW 1 /* Pins are active low */
224 #define LCD_MONOCHROME 0
228 #define LCD_COLOR16 4
230 /*----------------------------------------------------------------------*/
231 #if defined(CONFIG_LCD_INFO_BELOW_LOGO)
232 # define LCD_INFO_X 0
233 # define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
234 #elif defined(CONFIG_LCD_LOGO)
235 # define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
236 # define LCD_INFO_Y (VIDEO_FONT_HEIGHT)
238 # define LCD_INFO_X (VIDEO_FONT_WIDTH)
239 # define LCD_INFO_Y (VIDEO_FONT_HEIGHT)
242 /* Default to 8bpp if bit depth not specified */
244 # define LCD_BPP LCD_COLOR8
250 /* Calculate nr. of bits per pixel and nr. of colors */
251 #define NBITS(bit_code) (1 << (bit_code))
252 #define NCOLORS(bit_code) (1 << NBITS(bit_code))
254 /************************************************************************/
255 /* ** CONSOLE CONSTANTS */
256 /************************************************************************/
257 #if LCD_BPP == LCD_MONOCHROME
260 * Simple black/white definitions
262 # define CONSOLE_COLOR_BLACK 0
263 # define CONSOLE_COLOR_WHITE 1 /* Must remain last / highest */
265 #elif LCD_BPP == LCD_COLOR8
268 * 8bpp color definitions
270 # define CONSOLE_COLOR_BLACK 0
271 # define CONSOLE_COLOR_RED 1
272 # define CONSOLE_COLOR_GREEN 2
273 # define CONSOLE_COLOR_YELLOW 3
274 # define CONSOLE_COLOR_BLUE 4
275 # define CONSOLE_COLOR_MAGENTA 5
276 # define CONSOLE_COLOR_CYAN 6
277 # define CONSOLE_COLOR_GREY 14
278 # define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */
283 * 16bpp color definitions
285 # define CONSOLE_COLOR_BLACK 0x0000
286 # define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */
288 #endif /* color definitions */
290 /************************************************************************/
292 # define PAGE_SIZE 4096
295 /************************************************************************/
296 /* ** CONSOLE DEFINITIONS & FUNCTIONS */
297 /************************************************************************/
298 #if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
299 # define CONSOLE_ROWS ((panel_info.vl_row-BMP_LOGO_HEIGHT) \
302 # define CONSOLE_ROWS (panel_info.vl_row / VIDEO_FONT_HEIGHT)
305 #define CONSOLE_COLS (panel_info.vl_col / VIDEO_FONT_WIDTH)
306 #define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * lcd_line_length)
307 #define CONSOLE_ROW_FIRST (lcd_console_address)
308 #define CONSOLE_ROW_SECOND (lcd_console_address + CONSOLE_ROW_SIZE)
309 #define CONSOLE_ROW_LAST (lcd_console_address + CONSOLE_SIZE \
311 #define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS)
312 #define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE)
314 #if LCD_BPP == LCD_MONOCHROME
315 # define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \
316 (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
317 #elif LCD_BPP == LCD_COLOR8
318 # define COLOR_MASK(c) (c)
320 # error Unsupported LCD BPP.
323 /************************************************************************/