1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * (C) Copyright 2008 Semihalf
5 * (C) Copyright 2000-2005
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 ********************************************************************
8 * NOTE: This header file defines an interface to U-Boot. Including
9 * this (unmodified) header file in another file is considered normal
10 * use of U-Boot, and does *not* fall under the heading of "derived
12 ********************************************************************
19 #include <asm/byteorder.h>
22 /* Define this to avoid #ifdefs later on */
27 #include <sys/types.h>
29 /* new uImage format support enabled on host */
30 #define IMAGE_ENABLE_FIT 1
31 #define IMAGE_ENABLE_OF_LIBFDT 1
32 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
33 #define CONFIG_FIT_ENABLE_RSASSA_PSS_SUPPORT 1
34 #define CONFIG_FIT_SHA256
35 #define CONFIG_FIT_SHA384
36 #define CONFIG_FIT_SHA512
42 #define IMAGE_ENABLE_IGNORE 0
43 #define IMAGE_INDENT_STRING ""
48 #include <asm/u-boot.h>
51 /* Take notice of the 'ignore' property for hashes */
52 #define IMAGE_ENABLE_IGNORE 1
53 #define IMAGE_INDENT_STRING " "
55 #define IMAGE_ENABLE_FIT CONFIG_IS_ENABLED(FIT)
56 #define IMAGE_ENABLE_OF_LIBFDT CONFIG_IS_ENABLED(OF_LIBFDT)
58 #endif /* USE_HOSTCC */
62 #include <linux/libfdt.h>
63 #include <fdt_support.h>
64 # ifdef CONFIG_SPL_BUILD
65 # ifdef CONFIG_SPL_CRC32_SUPPORT
66 # define IMAGE_ENABLE_CRC32 1
68 # ifdef CONFIG_SPL_MD5_SUPPORT
69 # define IMAGE_ENABLE_MD5 1
71 # ifdef CONFIG_SPL_FIT_SHA1
72 # define IMAGE_ENABLE_SHA1 1
75 # define IMAGE_ENABLE_CRC32 1
76 # define IMAGE_ENABLE_MD5 1
77 # define IMAGE_ENABLE_SHA1 1
80 #ifndef IMAGE_ENABLE_CRC32
81 #define IMAGE_ENABLE_CRC32 0
84 #ifndef IMAGE_ENABLE_MD5
85 #define IMAGE_ENABLE_MD5 0
88 #ifndef IMAGE_ENABLE_SHA1
89 #define IMAGE_ENABLE_SHA1 0
92 #if defined(CONFIG_FIT_SHA256) || \
93 defined(CONFIG_SPL_FIT_SHA256)
94 #define IMAGE_ENABLE_SHA256 1
96 #define IMAGE_ENABLE_SHA256 0
99 #if defined(CONFIG_FIT_SHA384) || \
100 defined(CONFIG_SPL_FIT_SHA384)
101 #define IMAGE_ENABLE_SHA384 1
103 #define IMAGE_ENABLE_SHA384 0
106 #if defined(CONFIG_FIT_SHA512) || \
107 defined(CONFIG_SPL_FIT_SHA512)
108 #define IMAGE_ENABLE_SHA512 1
110 #define IMAGE_ENABLE_SHA512 0
113 #endif /* IMAGE_ENABLE_FIT */
115 #ifdef CONFIG_SYS_BOOT_GET_CMDLINE
116 # define IMAGE_BOOT_GET_CMDLINE 1
118 # define IMAGE_BOOT_GET_CMDLINE 0
121 #ifdef CONFIG_OF_BOARD_SETUP
122 # define IMAGE_OF_BOARD_SETUP 1
124 # define IMAGE_OF_BOARD_SETUP 0
127 #ifdef CONFIG_OF_SYSTEM_SETUP
128 # define IMAGE_OF_SYSTEM_SETUP 1
130 # define IMAGE_OF_SYSTEM_SETUP 0
133 extern ulong image_load_addr; /* Default Load Address */
134 extern ulong image_save_addr; /* Default Save Address */
135 extern ulong image_save_size; /* Default Save Size */
137 /* An invalid size, meaning that the image size is not known */
138 #define IMAGE_SIZE_INVAL (-1UL)
150 * Operating System Codes
152 * The following are exposed to uImage header.
153 * New IDs *MUST* be appended at the end of the list and *NEVER*
154 * inserted for backward compatibility.
157 IH_OS_INVALID = 0, /* Invalid OS */
158 IH_OS_OPENBSD, /* OpenBSD */
159 IH_OS_NETBSD, /* NetBSD */
160 IH_OS_FREEBSD, /* FreeBSD */
161 IH_OS_4_4BSD, /* 4.4BSD */
162 IH_OS_LINUX, /* Linux */
163 IH_OS_SVR4, /* SVR4 */
164 IH_OS_ESIX, /* Esix */
165 IH_OS_SOLARIS, /* Solaris */
166 IH_OS_IRIX, /* Irix */
168 IH_OS_DELL, /* Dell */
170 IH_OS_LYNXOS, /* LynxOS */
171 IH_OS_VXWORKS, /* VxWorks */
172 IH_OS_PSOS, /* pSOS */
174 IH_OS_U_BOOT, /* Firmware */
175 IH_OS_RTEMS, /* RTEMS */
176 IH_OS_ARTOS, /* ARTOS */
177 IH_OS_UNITY, /* Unity OS */
178 IH_OS_INTEGRITY, /* INTEGRITY */
180 IH_OS_PLAN9, /* Plan 9 */
181 IH_OS_OPENRTOS, /* OpenRTOS */
182 IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */
183 IH_OS_TEE, /* Trusted Execution Environment */
184 IH_OS_OPENSBI, /* RISC-V OpenSBI */
185 IH_OS_EFI, /* EFI Firmware (e.g. GRUB2) */
191 * CPU Architecture Codes (supported by Linux)
193 * The following are exposed to uImage header.
194 * New IDs *MUST* be appended at the end of the list and *NEVER*
195 * inserted for backward compatibility.
198 IH_ARCH_INVALID = 0, /* Invalid CPU */
199 IH_ARCH_ALPHA, /* Alpha */
200 IH_ARCH_ARM, /* ARM */
201 IH_ARCH_I386, /* Intel x86 */
202 IH_ARCH_IA64, /* IA64 */
203 IH_ARCH_MIPS, /* MIPS */
204 IH_ARCH_MIPS64, /* MIPS 64 Bit */
205 IH_ARCH_PPC, /* PowerPC */
206 IH_ARCH_S390, /* IBM S390 */
207 IH_ARCH_SH, /* SuperH */
208 IH_ARCH_SPARC, /* Sparc */
209 IH_ARCH_SPARC64, /* Sparc 64 Bit */
210 IH_ARCH_M68K, /* M68K */
211 IH_ARCH_NIOS, /* Nios-32 */
212 IH_ARCH_MICROBLAZE, /* MicroBlaze */
213 IH_ARCH_NIOS2, /* Nios-II */
214 IH_ARCH_BLACKFIN, /* Blackfin */
215 IH_ARCH_AVR32, /* AVR32 */
216 IH_ARCH_ST200, /* STMicroelectronics ST200 */
217 IH_ARCH_SANDBOX, /* Sandbox architecture (test only) */
218 IH_ARCH_NDS32, /* ANDES Technology - NDS32 */
219 IH_ARCH_OPENRISC, /* OpenRISC 1000 */
220 IH_ARCH_ARM64, /* ARM64 */
221 IH_ARCH_ARC, /* Synopsys DesignWare ARC */
222 IH_ARCH_X86_64, /* AMD x86_64, Intel and Via */
223 IH_ARCH_XTENSA, /* Xtensa */
224 IH_ARCH_RISCV, /* RISC-V */
232 * "Standalone Programs" are directly runnable in the environment
233 * provided by U-Boot; it is expected that (if they behave
234 * well) you can continue to work in U-Boot after return from
235 * the Standalone Program.
236 * "OS Kernel Images" are usually images of some Embedded OS which
237 * will take over control completely. Usually these programs
238 * will install their own set of exception handlers, device
239 * drivers, set up the MMU, etc. - this means, that you cannot
240 * expect to re-enter U-Boot except by resetting the CPU.
241 * "RAMDisk Images" are more or less just data blocks, and their
242 * parameters (address, size) are passed to an OS kernel that is
244 * "Multi-File Images" contain several images, typically an OS
245 * (Linux) kernel image and one or more data images like
246 * RAMDisks. This construct is useful for instance when you want
247 * to boot over the network using BOOTP etc., where the boot
248 * server provides just a single image file, but you want to get
249 * for instance an OS kernel and a RAMDisk image.
251 * "Multi-File Images" start with a list of image sizes, each
252 * image size (in bytes) specified by an "uint32_t" in network
253 * byte order. This list is terminated by an "(uint32_t)0".
254 * Immediately after the terminating 0 follow the images, one by
255 * one, all aligned on "uint32_t" boundaries (size rounded up to
256 * a multiple of 4 bytes - except for the last file).
258 * "Firmware Images" are binary images containing firmware (like
259 * U-Boot or FPGA images) which usually will be programmed to
262 * "Script files" are command sequences that will be executed by
263 * U-Boot's command interpreter; this feature is especially
264 * useful when you configure U-Boot to use a real shell (hush)
265 * as command interpreter (=> Shell Scripts).
267 * The following are exposed to uImage header.
268 * New IDs *MUST* be appended at the end of the list and *NEVER*
269 * inserted for backward compatibility.
273 IH_TYPE_INVALID = 0, /* Invalid Image */
274 IH_TYPE_STANDALONE, /* Standalone Program */
275 IH_TYPE_KERNEL, /* OS Kernel Image */
276 IH_TYPE_RAMDISK, /* RAMDisk Image */
277 IH_TYPE_MULTI, /* Multi-File Image */
278 IH_TYPE_FIRMWARE, /* Firmware Image */
279 IH_TYPE_SCRIPT, /* Script file */
280 IH_TYPE_FILESYSTEM, /* Filesystem Image (any type) */
281 IH_TYPE_FLATDT, /* Binary Flat Device Tree Blob */
282 IH_TYPE_KWBIMAGE, /* Kirkwood Boot Image */
283 IH_TYPE_IMXIMAGE, /* Freescale IMXBoot Image */
284 IH_TYPE_UBLIMAGE, /* Davinci UBL Image */
285 IH_TYPE_OMAPIMAGE, /* TI OMAP Config Header Image */
286 IH_TYPE_AISIMAGE, /* TI Davinci AIS Image */
287 /* OS Kernel Image, can run from any load address */
288 IH_TYPE_KERNEL_NOLOAD,
289 IH_TYPE_PBLIMAGE, /* Freescale PBL Boot Image */
290 IH_TYPE_MXSIMAGE, /* Freescale MXSBoot Image */
291 IH_TYPE_GPIMAGE, /* TI Keystone GPHeader Image */
292 IH_TYPE_ATMELIMAGE, /* ATMEL ROM bootable Image */
293 IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA CV/AV Preloader */
294 IH_TYPE_X86_SETUP, /* x86 setup.bin Image */
295 IH_TYPE_LPC32XXIMAGE, /* x86 setup.bin Image */
296 IH_TYPE_LOADABLE, /* A list of typeless images */
297 IH_TYPE_RKIMAGE, /* Rockchip Boot Image */
298 IH_TYPE_RKSD, /* Rockchip SD card */
299 IH_TYPE_RKSPI, /* Rockchip SPI image */
300 IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */
301 IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */
302 IH_TYPE_ZYNQMPBIF, /* Xilinx ZynqMP Boot Image (bif) */
303 IH_TYPE_FPGA, /* FPGA Image */
304 IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */
305 IH_TYPE_TEE, /* Trusted Execution Environment OS Image */
306 IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */
307 IH_TYPE_PMMC, /* TI Power Management Micro-Controller Firmware */
308 IH_TYPE_STM32IMAGE, /* STMicroelectronics STM32 Image */
309 IH_TYPE_SOCFPGAIMAGE_V1, /* Altera SOCFPGA A10 Preloader */
310 IH_TYPE_MTKIMAGE, /* MediaTek BootROM loadable Image */
311 IH_TYPE_IMX8MIMAGE, /* Freescale IMX8MBoot Image */
312 IH_TYPE_IMX8IMAGE, /* Freescale IMX8Boot Image */
313 IH_TYPE_COPRO, /* Coprocessor Image for remoteproc*/
314 IH_TYPE_SUNXI_EGON, /* Allwinner eGON Boot Image */
316 IH_TYPE_COUNT, /* Number of image types */
322 * The following are exposed to uImage header.
323 * New IDs *MUST* be appended at the end of the list and *NEVER*
324 * inserted for backward compatibility.
327 IH_COMP_NONE = 0, /* No Compression Used */
328 IH_COMP_GZIP, /* gzip Compression Used */
329 IH_COMP_BZIP2, /* bzip2 Compression Used */
330 IH_COMP_LZMA, /* lzma Compression Used */
331 IH_COMP_LZO, /* lzo Compression Used */
332 IH_COMP_LZ4, /* lz4 Compression Used */
333 IH_COMP_ZSTD, /* zstd Compression Used */
338 #define LZ4F_MAGIC 0x184D2204 /* LZ4 Magic Number */
339 #define IH_MAGIC 0x27051956 /* Image Magic Number */
340 #define IH_NMLEN 32 /* Image Name Length */
342 /* Reused from common.h */
343 #define ROUND(a, b) (((a) + (b) - 1) & ~((b) - 1))
346 * Legacy format image header,
347 * all data in network byte order (aka natural aka bigendian).
349 typedef struct image_header {
350 uint32_t ih_magic; /* Image Header Magic Number */
351 uint32_t ih_hcrc; /* Image Header CRC Checksum */
352 uint32_t ih_time; /* Image Creation Timestamp */
353 uint32_t ih_size; /* Image Data Size */
354 uint32_t ih_load; /* Data Load Address */
355 uint32_t ih_ep; /* Entry Point Address */
356 uint32_t ih_dcrc; /* Image Data CRC Checksum */
357 uint8_t ih_os; /* Operating System */
358 uint8_t ih_arch; /* CPU architecture */
359 uint8_t ih_type; /* Image Type */
360 uint8_t ih_comp; /* Compression Type */
361 uint8_t ih_name[IH_NMLEN]; /* Image Name */
364 typedef struct image_info {
365 ulong start, end; /* start/end of blob */
366 ulong image_start, image_len; /* start of image within blob, len of image */
367 ulong load; /* load addr for the image */
368 uint8_t comp, type, os; /* compression, type of image, os type */
369 uint8_t arch; /* CPU architecture */
373 * Legacy and FIT format headers used by do_bootm() and do_bootm_<os>()
376 typedef struct bootm_headers {
378 * Legacy os image header, if it is a multi component image
379 * then boot_get_ramdisk() and get_fdt() will attempt to get
380 * data from second and third component accordingly.
382 image_header_t *legacy_hdr_os; /* image header pointer */
383 image_header_t legacy_hdr_os_copy; /* header copy */
384 ulong legacy_hdr_valid;
387 const char *fit_uname_cfg; /* configuration node unit name */
389 void *fit_hdr_os; /* os FIT image header */
390 const char *fit_uname_os; /* os subimage node unit name */
391 int fit_noffset_os; /* os subimage node offset */
393 void *fit_hdr_rd; /* init ramdisk FIT image header */
394 const char *fit_uname_rd; /* init ramdisk subimage node unit name */
395 int fit_noffset_rd; /* init ramdisk subimage node offset */
397 void *fit_hdr_fdt; /* FDT blob FIT image header */
398 const char *fit_uname_fdt; /* FDT blob subimage node unit name */
399 int fit_noffset_fdt;/* FDT blob subimage node offset */
401 void *fit_hdr_setup; /* x86 setup FIT image header */
402 const char *fit_uname_setup; /* x86 setup subimage node name */
403 int fit_noffset_setup;/* x86 setup subimage node offset */
407 image_info_t os; /* os image info */
408 ulong ep; /* entry point of OS */
410 ulong rd_start, rd_end;/* ramdisk start/end */
412 char *ft_addr; /* flat dev tree address */
413 ulong ft_len; /* length of flat device tree */
422 int verify; /* env_get("verify")[0] != 'n' */
424 #define BOOTM_STATE_START (0x00000001)
425 #define BOOTM_STATE_FINDOS (0x00000002)
426 #define BOOTM_STATE_FINDOTHER (0x00000004)
427 #define BOOTM_STATE_LOADOS (0x00000008)
428 #define BOOTM_STATE_RAMDISK (0x00000010)
429 #define BOOTM_STATE_FDT (0x00000020)
430 #define BOOTM_STATE_OS_CMDLINE (0x00000040)
431 #define BOOTM_STATE_OS_BD_T (0x00000080)
432 #define BOOTM_STATE_OS_PREP (0x00000100)
433 #define BOOTM_STATE_OS_FAKE_GO (0x00000200) /* 'Almost' run the OS */
434 #define BOOTM_STATE_OS_GO (0x00000400)
437 #if defined(CONFIG_LMB) && !defined(USE_HOSTCC)
438 struct lmb lmb; /* for memory mgmt */
442 extern bootm_headers_t images;
445 * Some systems (for example LWMON) have very short watchdog periods;
446 * we must make sure to split long operations like memmove() or
447 * checksum calculations into reasonable chunks.
450 #define CHUNKSZ (64 * 1024)
453 #ifndef CHUNKSZ_CRC32
454 #define CHUNKSZ_CRC32 (64 * 1024)
458 #define CHUNKSZ_MD5 (64 * 1024)
462 #define CHUNKSZ_SHA1 (64 * 1024)
465 #define uimage_to_cpu(x) be32_to_cpu(x)
466 #define cpu_to_uimage(x) cpu_to_be32(x)
469 * Translation table for entries of a specific type; used by
470 * get_table_entry_id() and get_table_entry_name().
472 typedef struct table_entry {
474 char *sname; /* short (input) name to find table entry */
475 char *lname; /* long (output) name to print for messages */
479 * Compression type and magic number mapping table.
481 struct comp_magic_map {
484 unsigned char magic[2];
488 * get_table_entry_id() scans the translation table trying to find an
489 * entry that matches the given short name. If a matching entry is
490 * found, it's id is returned to the caller.
492 int get_table_entry_id(const table_entry_t *table,
493 const char *table_name, const char *name);
495 * get_table_entry_name() scans the translation table trying to find
496 * an entry that matches the given id. If a matching entry is found,
497 * its long name is returned to the caller.
499 char *get_table_entry_name(const table_entry_t *table, char *msg, int id);
501 const char *genimg_get_os_name(uint8_t os);
504 * genimg_get_os_short_name() - get the short name for an OS
506 * @param os OS (IH_OS_...)
507 * @return OS short name, or "unknown" if unknown
509 const char *genimg_get_os_short_name(uint8_t comp);
511 const char *genimg_get_arch_name(uint8_t arch);
514 * genimg_get_arch_short_name() - get the short name for an architecture
516 * @param arch Architecture type (IH_ARCH_...)
517 * @return architecture short name, or "unknown" if unknown
519 const char *genimg_get_arch_short_name(uint8_t arch);
521 const char *genimg_get_type_name(uint8_t type);
524 * genimg_get_type_short_name() - get the short name for an image type
526 * @param type Image type (IH_TYPE_...)
527 * @return image short name, or "unknown" if unknown
529 const char *genimg_get_type_short_name(uint8_t type);
531 const char *genimg_get_comp_name(uint8_t comp);
534 * genimg_get_comp_short_name() - get the short name for a compression method
536 * @param comp compression method (IH_COMP_...)
537 * @return compression method short name, or "unknown" if unknown
539 const char *genimg_get_comp_short_name(uint8_t comp);
542 * genimg_get_cat_name() - Get the name of an item in a category
544 * @category: Category of item
546 * @return name of item, or "Unknown ..." if unknown
548 const char *genimg_get_cat_name(enum ih_category category, uint id);
551 * genimg_get_cat_short_name() - Get the short name of an item in a category
553 * @category: Category of item
555 * @return short name of item, or "Unknown ..." if unknown
557 const char *genimg_get_cat_short_name(enum ih_category category, uint id);
560 * genimg_get_cat_count() - Get the number of items in a category
562 * @category: Category to check
563 * @return the number of items in the category (IH_xxx_COUNT)
565 int genimg_get_cat_count(enum ih_category category);
568 * genimg_get_cat_desc() - Get the description of a category
570 * @category: Category to check
571 * @return the description of a category, e.g. "architecture". This
572 * effectively converts the enum to a string.
574 const char *genimg_get_cat_desc(enum ih_category category);
577 * genimg_cat_has_id() - Check whether a category has an item
579 * @category: Category to check
581 * @return true or false as to whether a category has an item
583 bool genimg_cat_has_id(enum ih_category category, uint id);
585 int genimg_get_os_id(const char *name);
586 int genimg_get_arch_id(const char *name);
587 int genimg_get_type_id(const char *name);
588 int genimg_get_comp_id(const char *name);
589 void genimg_print_size(uint32_t size);
591 #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \
593 #define IMAGE_ENABLE_TIMESTAMP 1
595 #define IMAGE_ENABLE_TIMESTAMP 0
597 void genimg_print_time(time_t timestamp);
599 /* What to do with a image load address ('load = <> 'in the FIT) */
601 FIT_LOAD_IGNORED, /* Ignore load address */
602 FIT_LOAD_OPTIONAL, /* Can be provided, but optional */
603 FIT_LOAD_OPTIONAL_NON_ZERO, /* Optional, a value of 0 is ignored */
604 FIT_LOAD_REQUIRED, /* Must be provided */
607 int boot_get_setup(bootm_headers_t *images, uint8_t arch, ulong *setup_start,
611 /* Image format types, returned by _get_format() routine */
612 #define IMAGE_FORMAT_INVALID 0x00
613 #if defined(CONFIG_LEGACY_IMAGE_FORMAT)
614 #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */
616 #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */
617 #define IMAGE_FORMAT_ANDROID 0x03 /* Android boot image */
619 ulong genimg_get_kernel_addr_fit(char * const img_addr,
620 const char **fit_uname_config,
621 const char **fit_uname_kernel);
622 ulong genimg_get_kernel_addr(char * const img_addr);
623 int genimg_get_format(const void *img_addr);
624 int genimg_has_config(bootm_headers_t *images);
626 int boot_get_fpga(int argc, char *const argv[], bootm_headers_t *images,
627 uint8_t arch, const ulong *ld_start, ulong * const ld_len);
628 int boot_get_ramdisk(int argc, char *const argv[], bootm_headers_t *images,
629 uint8_t arch, ulong *rd_start, ulong *rd_end);
632 * boot_get_loadable - routine to load a list of binaries to memory
633 * @argc: Ignored Argument
634 * @argv: Ignored Argument
635 * @images: pointer to the bootm images structure
636 * @arch: expected architecture for the image
637 * @ld_start: Ignored Argument
638 * @ld_len: Ignored Argument
640 * boot_get_loadable() will take the given FIT configuration, and look
641 * for a field named "loadables". Loadables, is a list of elements in
642 * the FIT given as strings. exe:
643 * loadables = "linux_kernel", "fdt-2";
644 * this function will attempt to parse each string, and load the
645 * corresponding element from the FIT into memory. Once placed,
646 * no aditional actions are taken.
649 * 0, if only valid images or no images are found
650 * error code, if an error occurs during fit_image_load
652 int boot_get_loadable(int argc, char *const argv[], bootm_headers_t *images,
653 uint8_t arch, const ulong *ld_start, ulong *const ld_len);
654 #endif /* !USE_HOSTCC */
656 int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch,
657 ulong *setup_start, ulong *setup_len);
660 * boot_get_fdt_fit() - load a DTB from a FIT file (applying overlays)
662 * This deals with all aspects of loading an DTB from a FIT.
663 * The correct base image based on configuration will be selected, and
664 * then any overlays specified will be applied (as present in fit_uname_configp).
666 * @param images Boot images structure
667 * @param addr Address of FIT in memory
668 * @param fit_unamep On entry this is the requested image name
669 * (e.g. "kernel") or NULL to use the default. On exit
670 * points to the selected image name
671 * @param fit_uname_configp On entry this is the requested configuration
672 * name (e.g. "conf-1") or NULL to use the default. On
673 * exit points to the selected configuration name.
674 * @param arch Expected architecture (IH_ARCH_...)
675 * @param datap Returns address of loaded image
676 * @param lenp Returns length of loaded image
678 * @return node offset of base image, or -ve error code on error
680 int boot_get_fdt_fit(bootm_headers_t *images, ulong addr,
681 const char **fit_unamep, const char **fit_uname_configp,
682 int arch, ulong *datap, ulong *lenp);
685 * fit_image_load() - load an image from a FIT
687 * This deals with all aspects of loading an image from a FIT, including
688 * selecting the right image based on configuration, verifying it, printing
689 * out progress messages, checking the type/arch/os and optionally copying it
690 * to the right load address.
692 * The property to look up is defined by image_type.
694 * @param images Boot images structure
695 * @param addr Address of FIT in memory
696 * @param fit_unamep On entry this is the requested image name
697 * (e.g. "kernel") or NULL to use the default. On exit
698 * points to the selected image name
699 * @param fit_uname_configp On entry this is the requested configuration
700 * name (e.g. "conf-1") or NULL to use the default. On
701 * exit points to the selected configuration name.
702 * @param arch Expected architecture (IH_ARCH_...)
703 * @param image_type Required image type (IH_TYPE_...). If this is
704 * IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD
706 * @param bootstage_id ID of starting bootstage to use for progress updates.
707 * This will be added to the BOOTSTAGE_SUB values when
708 * calling bootstage_mark()
709 * @param load_op Decribes what to do with the load address
710 * @param datap Returns address of loaded image
711 * @param lenp Returns length of loaded image
712 * @return node offset of image, or -ve error code on error
714 int fit_image_load(bootm_headers_t *images, ulong addr,
715 const char **fit_unamep, const char **fit_uname_configp,
716 int arch, int image_type, int bootstage_id,
717 enum fit_load_op load_op, ulong *datap, ulong *lenp);
720 * image_source_script() - Execute a script
722 * Executes a U-Boot script at a particular address in memory. The script should
723 * have a header (FIT or legacy) with the script type (IH_TYPE_SCRIPT).
725 * @addr: Address of script
726 * @fit_uname: FIT subimage name
727 * @return result code (enum command_ret_t)
729 int image_source_script(ulong addr, const char *fit_uname);
733 * fit_get_node_from_config() - Look up an image a FIT by type
735 * This looks in the selected conf- node (images->fit_uname_cfg) for a
736 * particular image type (e.g. "kernel") and then finds the image that is
739 * For example, for something like:
752 * the function will return the node offset of the kernel@1 node, assuming
753 * that conf-1 is the chosen configuration.
755 * @param images Boot images structure
756 * @param prop_name Property name to look up (FIT_..._PROP)
757 * @param addr Address of FIT in memory
759 int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name,
762 int boot_get_fdt(int flag, int argc, char *const argv[], uint8_t arch,
763 bootm_headers_t *images,
764 char **of_flat_tree, ulong *of_size);
765 void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob);
766 int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size);
768 int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len,
769 ulong *initrd_start, ulong *initrd_end);
770 int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end);
771 #ifdef CONFIG_SYS_BOOT_GET_KBD
772 int boot_get_kbd(struct lmb *lmb, struct bd_info **kbd);
773 #endif /* CONFIG_SYS_BOOT_GET_KBD */
774 #endif /* !USE_HOSTCC */
776 /*******************************************************************/
777 /* Legacy format specific code (prefixed with image_) */
778 /*******************************************************************/
779 static inline uint32_t image_get_header_size(void)
781 return (sizeof(image_header_t));
784 #define image_get_hdr_l(f) \
785 static inline uint32_t image_get_##f(const image_header_t *hdr) \
787 return uimage_to_cpu(hdr->ih_##f); \
789 image_get_hdr_l(magic) /* image_get_magic */
790 image_get_hdr_l(hcrc) /* image_get_hcrc */
791 image_get_hdr_l(time) /* image_get_time */
792 image_get_hdr_l(size) /* image_get_size */
793 image_get_hdr_l(load) /* image_get_load */
794 image_get_hdr_l(ep) /* image_get_ep */
795 image_get_hdr_l(dcrc) /* image_get_dcrc */
797 #define image_get_hdr_b(f) \
798 static inline uint8_t image_get_##f(const image_header_t *hdr) \
800 return hdr->ih_##f; \
802 image_get_hdr_b(os) /* image_get_os */
803 image_get_hdr_b(arch) /* image_get_arch */
804 image_get_hdr_b(type) /* image_get_type */
805 image_get_hdr_b(comp) /* image_get_comp */
807 static inline char *image_get_name(const image_header_t *hdr)
809 return (char *)hdr->ih_name;
812 static inline uint32_t image_get_data_size(const image_header_t *hdr)
814 return image_get_size(hdr);
818 * image_get_data - get image payload start address
821 * image_get_data() returns address of the image payload. For single
822 * component images it is image data start. For multi component
823 * images it points to the null terminated table of sub-images sizes.
826 * image payload data start address
828 static inline ulong image_get_data(const image_header_t *hdr)
830 return ((ulong)hdr + image_get_header_size());
833 static inline uint32_t image_get_image_size(const image_header_t *hdr)
835 return (image_get_size(hdr) + image_get_header_size());
837 static inline ulong image_get_image_end(const image_header_t *hdr)
839 return ((ulong)hdr + image_get_image_size(hdr));
842 #define image_set_hdr_l(f) \
843 static inline void image_set_##f(image_header_t *hdr, uint32_t val) \
845 hdr->ih_##f = cpu_to_uimage(val); \
847 image_set_hdr_l(magic) /* image_set_magic */
848 image_set_hdr_l(hcrc) /* image_set_hcrc */
849 image_set_hdr_l(time) /* image_set_time */
850 image_set_hdr_l(size) /* image_set_size */
851 image_set_hdr_l(load) /* image_set_load */
852 image_set_hdr_l(ep) /* image_set_ep */
853 image_set_hdr_l(dcrc) /* image_set_dcrc */
855 #define image_set_hdr_b(f) \
856 static inline void image_set_##f(image_header_t *hdr, uint8_t val) \
860 image_set_hdr_b(os) /* image_set_os */
861 image_set_hdr_b(arch) /* image_set_arch */
862 image_set_hdr_b(type) /* image_set_type */
863 image_set_hdr_b(comp) /* image_set_comp */
865 static inline void image_set_name(image_header_t *hdr, const char *name)
867 strncpy(image_get_name(hdr), name, IH_NMLEN);
870 int image_check_hcrc(const image_header_t *hdr);
871 int image_check_dcrc(const image_header_t *hdr);
873 ulong env_get_bootm_low(void);
874 phys_size_t env_get_bootm_size(void);
875 phys_size_t env_get_bootm_mapsize(void);
877 void memmove_wd(void *to, void *from, size_t len, ulong chunksz);
879 static inline int image_check_magic(const image_header_t *hdr)
881 return (image_get_magic(hdr) == IH_MAGIC);
883 static inline int image_check_type(const image_header_t *hdr, uint8_t type)
885 return (image_get_type(hdr) == type);
887 static inline int image_check_arch(const image_header_t *hdr, uint8_t arch)
890 /* Let's assume that sandbox can load any architecture */
891 if (IS_ENABLED(CONFIG_SANDBOX))
894 return (image_get_arch(hdr) == arch) ||
895 (image_get_arch(hdr) == IH_ARCH_ARM && arch == IH_ARCH_ARM64);
897 static inline int image_check_os(const image_header_t *hdr, uint8_t os)
899 return (image_get_os(hdr) == os);
902 ulong image_multi_count(const image_header_t *hdr);
903 void image_multi_getimg(const image_header_t *hdr, ulong idx,
904 ulong *data, ulong *len);
906 void image_print_contents(const void *hdr);
909 static inline int image_check_target_arch(const image_header_t *hdr)
911 #ifndef IH_ARCH_DEFAULT
912 # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h"
914 return image_check_arch(hdr, IH_ARCH_DEFAULT);
916 #endif /* USE_HOSTCC */
919 * image_decomp_type() - Find out compression type of an image
921 * @buf: Address in U-Boot memory where image is loaded.
922 * @len: Length of the compressed image.
923 * @return compression type or IH_COMP_NONE if not compressed.
925 * Note: Only following compression types are supported now.
926 * lzo, lzma, gzip, bzip2
928 int image_decomp_type(const unsigned char *buf, ulong len);
931 * image_decomp() - decompress an image
933 * @comp: Compression algorithm that is used (IH_COMP_...)
934 * @load: Destination load address in U-Boot memory
935 * @image_start Image start address (where we are decompressing from)
936 * @type: OS type (IH_OS_...)
937 * @load_bug: Place to decompress to
938 * @image_buf: Address to decompress from
939 * @image_len: Number of bytes in @image_buf to decompress
940 * @unc_len: Available space for decompression
941 * @return 0 if OK, -ve on error (BOOTM_ERR_...)
943 int image_decomp(int comp, ulong load, ulong image_start, int type,
944 void *load_buf, void *image_buf, ulong image_len,
945 uint unc_len, ulong *load_end);
948 * Set up properties in the FDT
950 * This sets up properties in the FDT that is to be passed to linux.
952 * @images: Images information
953 * @blob: FDT to update
954 * @of_size: Size of the FDT
955 * @lmb: Points to logical memory block structure
956 * @return 0 if ok, <0 on failure
958 int image_setup_libfdt(bootm_headers_t *images, void *blob,
959 int of_size, struct lmb *lmb);
962 * Set up the FDT to use for booting a kernel
964 * This performs ramdisk setup, sets up the FDT if required, and adds
965 * paramters to the FDT if libfdt is available.
967 * @param images Images information
968 * @return 0 if ok, <0 on failure
970 int image_setup_linux(bootm_headers_t *images);
973 * bootz_setup() - Extract stat and size of a Linux xImage
975 * @image: Address of image
976 * @start: Returns start address of image
977 * @end : Returns end address of image
978 * @return 0 if OK, 1 if the image was not recognised
980 int bootz_setup(ulong image, ulong *start, ulong *end);
983 * Return the correct start address and size of a Linux aarch64 Image.
985 * @image: Address of image
986 * @start: Returns start address of image
987 * @size : Returns size image
988 * @force_reloc: Ignore image->ep field, always place image to RAM start
989 * @return 0 if OK, 1 if the image was not recognised
991 int booti_setup(ulong image, ulong *relocated_addr, ulong *size,
994 /*******************************************************************/
995 /* New uImage format specific code (prefixed with fit_) */
996 /*******************************************************************/
998 #define FIT_IMAGES_PATH "/images"
999 #define FIT_CONFS_PATH "/configurations"
1001 /* hash/signature/key node */
1002 #define FIT_HASH_NODENAME "hash"
1003 #define FIT_ALGO_PROP "algo"
1004 #define FIT_VALUE_PROP "value"
1005 #define FIT_IGNORE_PROP "uboot-ignore"
1006 #define FIT_SIG_NODENAME "signature"
1007 #define FIT_KEY_REQUIRED "required"
1008 #define FIT_KEY_HINT "key-name-hint"
1011 #define FIT_CIPHER_NODENAME "cipher"
1012 #define FIT_ALGO_PROP "algo"
1015 #define FIT_DATA_PROP "data"
1016 #define FIT_DATA_POSITION_PROP "data-position"
1017 #define FIT_DATA_OFFSET_PROP "data-offset"
1018 #define FIT_DATA_SIZE_PROP "data-size"
1019 #define FIT_TIMESTAMP_PROP "timestamp"
1020 #define FIT_DESC_PROP "description"
1021 #define FIT_ARCH_PROP "arch"
1022 #define FIT_TYPE_PROP "type"
1023 #define FIT_OS_PROP "os"
1024 #define FIT_COMP_PROP "compression"
1025 #define FIT_ENTRY_PROP "entry"
1026 #define FIT_LOAD_PROP "load"
1028 /* configuration node */
1029 #define FIT_KERNEL_PROP "kernel"
1030 #define FIT_RAMDISK_PROP "ramdisk"
1031 #define FIT_FDT_PROP "fdt"
1032 #define FIT_LOADABLE_PROP "loadables"
1033 #define FIT_DEFAULT_PROP "default"
1034 #define FIT_SETUP_PROP "setup"
1035 #define FIT_FPGA_PROP "fpga"
1036 #define FIT_FIRMWARE_PROP "firmware"
1037 #define FIT_STANDALONE_PROP "standalone"
1039 #define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE
1041 #if IMAGE_ENABLE_FIT
1042 /* cmdline argument format parsing */
1043 int fit_parse_conf(const char *spec, ulong addr_curr,
1044 ulong *addr, const char **conf_name);
1045 int fit_parse_subimage(const char *spec, ulong addr_curr,
1046 ulong *addr, const char **image_name);
1048 int fit_get_subimage_count(const void *fit, int images_noffset);
1049 void fit_print_contents(const void *fit);
1050 void fit_image_print(const void *fit, int noffset, const char *p);
1053 * fit_get_end - get FIT image size
1054 * @fit: pointer to the FIT format image header
1057 * size of the FIT image (blob) in memory
1059 static inline ulong fit_get_size(const void *fit)
1061 return fdt_totalsize(fit);
1065 * fit_get_end - get FIT image end
1066 * @fit: pointer to the FIT format image header
1069 * end address of the FIT image (blob) in memory
1071 ulong fit_get_end(const void *fit);
1074 * fit_get_name - get FIT node name
1075 * @fit: pointer to the FIT format image header
1079 * pointer to node name, on success
1081 static inline const char *fit_get_name(const void *fit_hdr,
1082 int noffset, int *len)
1084 return fdt_get_name(fit_hdr, noffset, len);
1087 int fit_get_desc(const void *fit, int noffset, char **desc);
1088 int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp);
1090 int fit_image_get_node(const void *fit, const char *image_uname);
1091 int fit_image_get_os(const void *fit, int noffset, uint8_t *os);
1092 int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch);
1093 int fit_image_get_type(const void *fit, int noffset, uint8_t *type);
1094 int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp);
1095 int fit_image_get_load(const void *fit, int noffset, ulong *load);
1096 int fit_image_get_entry(const void *fit, int noffset, ulong *entry);
1097 int fit_image_get_data(const void *fit, int noffset,
1098 const void **data, size_t *size);
1099 int fit_image_get_data_offset(const void *fit, int noffset, int *data_offset);
1100 int fit_image_get_data_position(const void *fit, int noffset,
1101 int *data_position);
1102 int fit_image_get_data_size(const void *fit, int noffset, int *data_size);
1103 int fit_image_get_data_size_unciphered(const void *fit, int noffset,
1105 int fit_image_get_data_and_size(const void *fit, int noffset,
1106 const void **data, size_t *size);
1108 int fit_image_hash_get_algo(const void *fit, int noffset, char **algo);
1109 int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
1112 int fit_set_timestamp(void *fit, int noffset, time_t timestamp);
1114 int fit_cipher_data(const char *keydir, void *keydest, void *fit,
1115 const char *comment, int require_keys,
1116 const char *engine_id, const char *cmdname);
1119 * fit_add_verification_data() - add verification data to FIT image nodes
1121 * @keydir: Directory containing keys
1122 * @kwydest: FDT blob to write public key information to
1123 * @fit: Pointer to the FIT format image header
1124 * @comment: Comment to add to signature nodes
1125 * @require_keys: Mark all keys as 'required'
1126 * @engine_id: Engine to use for signing
1127 * @cmdname: Command name used when reporting errors
1129 * Adds hash values for all component images in the FIT blob.
1130 * Hashes are calculated for all component images which have hash subnodes
1131 * with algorithm property set to one of the supported hash algorithms.
1133 * Also add signatures if signature nodes are present.
1137 * libfdt error code, on failure
1139 int fit_add_verification_data(const char *keydir, const char *keyfile,
1140 void *keydest, void *fit, const char *comment,
1141 int require_keys, const char *engine_id,
1142 const char *cmdname);
1144 int fit_image_verify_with_data(const void *fit, int image_noffset,
1145 const void *data, size_t size);
1146 int fit_image_verify(const void *fit, int noffset);
1147 int fit_config_verify(const void *fit, int conf_noffset);
1148 int fit_all_image_verify(const void *fit);
1149 int fit_config_decrypt(const void *fit, int conf_noffset);
1150 int fit_image_check_os(const void *fit, int noffset, uint8_t os);
1151 int fit_image_check_arch(const void *fit, int noffset, uint8_t arch);
1152 int fit_image_check_type(const void *fit, int noffset, uint8_t type);
1153 int fit_image_check_comp(const void *fit, int noffset, uint8_t comp);
1156 * fit_check_format() - Check that the FIT is valid
1158 * This performs various checks on the FIT to make sure it is suitable for
1159 * use, looking for mandatory properties, nodes, etc.
1161 * If FIT_FULL_CHECK is enabled, it also runs it through libfdt to make
1162 * sure that there are no strange tags or broken nodes in the FIT.
1164 * @fit: pointer to the FIT format image header
1165 * @return 0 if OK, -ENOEXEC if not an FDT file, -EINVAL if the full FDT check
1166 * failed (e.g. due to bad structure), -ENOMSG if the description is
1167 * missing, -EBADMSG if the timestamp is missing, -ENOENT if the /images
1170 int fit_check_format(const void *fit, ulong size);
1172 int fit_conf_find_compat(const void *fit, const void *fdt);
1175 * fit_conf_get_node - get node offset for configuration of a given unit name
1176 * @fit: pointer to the FIT format image header
1177 * @conf_uname: configuration node unit name (NULL to use default)
1179 * fit_conf_get_node() finds a configuration (within the '/configurations'
1180 * parent node) of a provided unit name. If configuration is found its node
1181 * offset is returned to the caller.
1183 * When NULL is provided in second argument fit_conf_get_node() will search
1184 * for a default configuration node instead. Default configuration node unit
1185 * name is retrieved from FIT_DEFAULT_PROP property of the '/configurations'
1189 * configuration node offset when found (>=0)
1190 * negative number on failure (FDT_ERR_* code)
1192 int fit_conf_get_node(const void *fit, const char *conf_uname);
1194 int fit_conf_get_prop_node_count(const void *fit, int noffset,
1195 const char *prop_name);
1196 int fit_conf_get_prop_node_index(const void *fit, int noffset,
1197 const char *prop_name, int index);
1200 * fit_conf_get_prop_node() - Get node refered to by a configuration
1201 * @fit: FIT to check
1202 * @noffset: Offset of conf@xxx node to check
1203 * @prop_name: Property to read from the conf node
1205 * The conf- nodes contain references to other nodes, using properties
1206 * like 'kernel = "kernel"'. Given such a property name (e.g. "kernel"),
1207 * return the offset of the node referred to (e.g. offset of node
1210 int fit_conf_get_prop_node(const void *fit, int noffset,
1211 const char *prop_name);
1213 int fit_check_ramdisk(const void *fit, int os_noffset,
1214 uint8_t arch, int verify);
1215 #endif /* IMAGE_ENABLE_FIT */
1217 int calculate_hash(const void *data, int data_len, const char *algo,
1218 uint8_t *value, int *value_len);
1221 * At present we only support signing on the host, and verification on the
1224 #if defined(USE_HOSTCC)
1225 # if defined(CONFIG_FIT_SIGNATURE)
1226 # define IMAGE_ENABLE_SIGN 1
1227 # define IMAGE_ENABLE_VERIFY 1
1228 # define IMAGE_ENABLE_VERIFY_ECDSA 1
1229 # define FIT_IMAGE_ENABLE_VERIFY 1
1230 # include <openssl/evp.h>
1232 # define IMAGE_ENABLE_SIGN 0
1233 # define IMAGE_ENABLE_VERIFY 0
1234 # define IMAGE_ENABLE_VERIFY_ECDSA 0
1235 # define FIT_IMAGE_ENABLE_VERIFY 0
1238 # define IMAGE_ENABLE_SIGN 0
1239 # define IMAGE_ENABLE_VERIFY CONFIG_IS_ENABLED(RSA_VERIFY)
1240 # define IMAGE_ENABLE_VERIFY_ECDSA 0
1241 # define FIT_IMAGE_ENABLE_VERIFY CONFIG_IS_ENABLED(FIT_SIGNATURE)
1244 #if IMAGE_ENABLE_FIT
1246 void *image_get_host_blob(void);
1247 void image_set_host_blob(void *host_blob);
1248 # define gd_fdt_blob() image_get_host_blob()
1250 # define gd_fdt_blob() (gd->fdt_blob)
1253 #ifdef CONFIG_FIT_BEST_MATCH
1254 #define IMAGE_ENABLE_BEST_MATCH 1
1256 #define IMAGE_ENABLE_BEST_MATCH 0
1258 #endif /* IMAGE_ENABLE_FIT */
1261 * Information passed to the signing routines
1263 * Either 'keydir', 'keyname', or 'keyfile' can be NULL. However, either
1264 * 'keyfile', or both 'keydir' and 'keyname' should have valid values. If
1265 * neither are valid, some operations might fail with EINVAL.
1267 struct image_sign_info {
1268 const char *keydir; /* Directory conaining keys */
1269 const char *keyname; /* Name of key to use */
1270 const char *keyfile; /* Filename of private or public key */
1271 void *fit; /* Pointer to FIT blob */
1272 int node_offset; /* Offset of signature node */
1273 const char *name; /* Algorithm name */
1274 struct checksum_algo *checksum; /* Checksum algorithm information */
1275 struct padding_algo *padding; /* Padding algorithm information */
1276 struct crypto_algo *crypto; /* Crypto algorithm information */
1277 const void *fdt_blob; /* FDT containing public keys */
1278 int required_keynode; /* Node offset of key to use: -1=any */
1279 const char *require_keys; /* Value for 'required' property */
1280 const char *engine_id; /* Engine to use for signing */
1282 * Note: the following two fields are always valid even w/o
1283 * RSA_VERIFY_WITH_PKEY in order to make sure this structure is
1284 * the same on target and host. Otherwise, vboot test may fail.
1286 const void *key; /* Pointer to public key in DER */
1287 int keylen; /* Length of public key */
1290 /* A part of an image, used for hashing */
1291 struct image_region {
1296 #if IMAGE_ENABLE_VERIFY
1297 # include <u-boot/hash-checksum.h>
1299 struct checksum_algo {
1301 const int checksum_len;
1303 const uint8_t *der_prefix;
1304 #if IMAGE_ENABLE_SIGN
1305 const EVP_MD *(*calculate_sign)(void);
1307 int (*calculate)(const char *name,
1308 const struct image_region region[],
1309 int region_count, uint8_t *checksum);
1312 struct crypto_algo {
1313 const char *name; /* Name of algorithm */
1317 * sign() - calculate and return signature for given input data
1319 * @info: Specifies key and FIT information
1320 * @data: Pointer to the input data
1321 * @data_len: Data length
1322 * @sigp: Set to an allocated buffer holding the signature
1323 * @sig_len: Set to length of the calculated hash
1325 * This computes input data signature according to selected algorithm.
1326 * Resulting signature value is placed in an allocated buffer, the
1327 * pointer is returned as *sigp. The length of the calculated
1328 * signature is returned via the sig_len pointer argument. The caller
1329 * should free *sigp.
1331 * @return: 0, on success, -ve on error
1333 int (*sign)(struct image_sign_info *info,
1334 const struct image_region region[],
1335 int region_count, uint8_t **sigp, uint *sig_len);
1338 * add_verify_data() - Add verification information to FDT
1340 * Add public key information to the FDT node, suitable for
1341 * verification at run-time. The information added depends on the
1342 * algorithm being used.
1344 * @info: Specifies key and FIT information
1345 * @keydest: Destination FDT blob for public key data
1346 * @return: 0, on success, -ve on error
1348 int (*add_verify_data)(struct image_sign_info *info, void *keydest);
1351 * verify() - Verify a signature against some data
1353 * @info: Specifies key and FIT information
1354 * @data: Pointer to the input data
1355 * @data_len: Data length
1357 * @sig_len: Number of bytes in signature
1358 * @return 0 if verified, -ve on error
1360 int (*verify)(struct image_sign_info *info,
1361 const struct image_region region[], int region_count,
1362 uint8_t *sig, uint sig_len);
1365 struct padding_algo {
1367 int (*verify)(struct image_sign_info *info,
1368 uint8_t *pad, int pad_len,
1369 const uint8_t *hash, int hash_len);
1373 * image_get_checksum_algo() - Look up a checksum algorithm
1375 * @param full_name Name of algorithm in the form "checksum,crypto"
1376 * @return pointer to algorithm information, or NULL if not found
1378 struct checksum_algo *image_get_checksum_algo(const char *full_name);
1381 * image_get_crypto_algo() - Look up a cryptosystem algorithm
1383 * @param full_name Name of algorithm in the form "checksum,crypto"
1384 * @return pointer to algorithm information, or NULL if not found
1386 struct crypto_algo *image_get_crypto_algo(const char *full_name);
1389 * image_get_padding_algo() - Look up a padding algorithm
1391 * @param name Name of padding algorithm
1392 * @return pointer to algorithm information, or NULL if not found
1394 struct padding_algo *image_get_padding_algo(const char *name);
1396 #if IMAGE_ENABLE_FIT
1399 * fit_image_verify_required_sigs() - Verify signatures marked as 'required'
1401 * @fit: FIT to check
1402 * @image_noffset: Offset of image node to check
1403 * @data: Image data to check
1404 * @size: Size of image data
1405 * @sig_blob: FDT containing public keys
1406 * @no_sigsp: Returns 1 if no signatures were required, and
1407 * therefore nothing was checked. The caller may wish
1408 * to fall back to other mechanisms, or refuse to
1410 * @return 0 if all verified ok, <0 on error
1412 int fit_image_verify_required_sigs(const void *fit, int image_noffset,
1413 const char *data, size_t size, const void *sig_blob,
1417 * fit_image_check_sig() - Check a single image signature node
1419 * @fit: FIT to check
1420 * @noffset: Offset of signature node to check
1421 * @data: Image data to check
1422 * @size: Size of image data
1423 * @required_keynode: Offset in the control FDT of the required key node,
1424 * if any. If this is given, then the image wil not
1425 * pass verification unless that key is used. If this is
1426 * -1 then any signature will do.
1427 * @err_msgp: In the event of an error, this will be pointed to a
1428 * help error string to display to the user.
1429 * @return 0 if all verified ok, <0 on error
1431 int fit_image_check_sig(const void *fit, int noffset, const void *data,
1432 size_t size, int required_keynode, char **err_msgp);
1434 int fit_image_decrypt_data(const void *fit,
1435 int image_noffset, int cipher_noffset,
1436 const void *data, size_t size,
1437 void **data_unciphered, size_t *size_unciphered);
1440 * fit_region_make_list() - Make a list of regions to hash
1442 * Given a list of FIT regions (offset, size) provided by libfdt, create
1443 * a list of regions (void *, size) for use by the signature creationg
1444 * and verification code.
1446 * @fit: FIT image to process
1447 * @fdt_regions: Regions as returned by libfdt
1448 * @count: Number of regions returned by libfdt
1449 * @region: Place to put list of regions (NULL to allocate it)
1450 * @return pointer to list of regions, or NULL if out of memory
1452 struct image_region *fit_region_make_list(const void *fit,
1453 struct fdt_region *fdt_regions, int count,
1454 struct image_region *region);
1456 static inline int fit_image_check_target_arch(const void *fdt, int node)
1459 return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT);
1466 * At present we only support ciphering on the host, and unciphering on the
1469 #if defined(USE_HOSTCC)
1470 # if defined(CONFIG_FIT_CIPHER)
1471 # define IMAGE_ENABLE_ENCRYPT 1
1472 # define IMAGE_ENABLE_DECRYPT 1
1473 # include <openssl/evp.h>
1475 # define IMAGE_ENABLE_ENCRYPT 0
1476 # define IMAGE_ENABLE_DECRYPT 0
1479 # define IMAGE_ENABLE_ENCRYPT 0
1480 # define IMAGE_ENABLE_DECRYPT CONFIG_IS_ENABLED(FIT_CIPHER)
1483 /* Information passed to the ciphering routines */
1484 struct image_cipher_info {
1485 const char *keydir; /* Directory containing keys */
1486 const char *keyname; /* Name of key to use */
1487 const char *ivname; /* Name of IV to use */
1488 const void *fit; /* Pointer to FIT blob */
1489 int node_noffset; /* Offset of the cipher node */
1490 const char *name; /* Algorithm name */
1491 struct cipher_algo *cipher; /* Cipher algorithm information */
1492 const void *fdt_blob; /* FDT containing key and IV */
1493 const void *key; /* Value of the key */
1494 const void *iv; /* Value of the IV */
1495 size_t size_unciphered; /* Size of the unciphered data */
1498 struct cipher_algo {
1499 const char *name; /* Name of algorithm */
1500 int key_len; /* Length of the key */
1501 int iv_len; /* Length of the IV */
1503 #if IMAGE_ENABLE_ENCRYPT
1504 const EVP_CIPHER * (*calculate_type)(void);
1507 int (*encrypt)(struct image_cipher_info *info,
1508 const unsigned char *data, int data_len,
1509 unsigned char **cipher, int *cipher_len);
1511 int (*add_cipher_data)(struct image_cipher_info *info,
1512 void *keydest, void *fit, int node_noffset);
1514 int (*decrypt)(struct image_cipher_info *info,
1515 const void *cipher, size_t cipher_len,
1516 void **data, size_t *data_len);
1519 int fit_image_cipher_get_algo(const void *fit, int noffset, char **algo);
1521 struct cipher_algo *image_get_cipher_algo(const char *full_name);
1523 #ifdef CONFIG_FIT_VERBOSE
1524 #define fit_unsupported(msg) printf("! %s:%d " \
1525 "FIT images not supported for '%s'\n", \
1526 __FILE__, __LINE__, (msg))
1528 #define fit_unsupported_reset(msg) printf("! %s:%d " \
1529 "FIT images not supported for '%s' " \
1530 "- must reset board to recover!\n", \
1531 __FILE__, __LINE__, (msg))
1533 #define fit_unsupported(msg)
1534 #define fit_unsupported_reset(msg)
1535 #endif /* CONFIG_FIT_VERBOSE */
1536 #endif /* CONFIG_FIT */
1538 #if !defined(USE_HOSTCC)
1539 #if defined(CONFIG_ANDROID_BOOT_IMAGE)
1540 struct andr_img_hdr;
1541 int android_image_check_header(const struct andr_img_hdr *hdr);
1542 int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify,
1543 ulong *os_data, ulong *os_len);
1544 int android_image_get_ramdisk(const struct andr_img_hdr *hdr,
1545 ulong *rd_data, ulong *rd_len);
1546 int android_image_get_second(const struct andr_img_hdr *hdr,
1547 ulong *second_data, ulong *second_len);
1548 bool android_image_get_dtbo(ulong hdr_addr, ulong *addr, u32 *size);
1549 bool android_image_get_dtb_by_index(ulong hdr_addr, u32 index, ulong *addr,
1551 ulong android_image_get_end(const struct andr_img_hdr *hdr);
1552 ulong android_image_get_kload(const struct andr_img_hdr *hdr);
1553 ulong android_image_get_kcomp(const struct andr_img_hdr *hdr);
1554 void android_print_contents(const struct andr_img_hdr *hdr);
1555 #if !defined(CONFIG_SPL_BUILD)
1556 bool android_image_print_dtb_contents(ulong hdr_addr);
1559 #endif /* CONFIG_ANDROID_BOOT_IMAGE */
1560 #endif /* !USE_HOSTCC */
1563 * board_fit_config_name_match() - Check for a matching board name
1565 * This is used when SPL loads a FIT containing multiple device tree files
1566 * and wants to work out which one to use. The description of each one is
1567 * passed to this function. The description comes from the 'description' field
1568 * in each (FDT) image node.
1570 * @name: Device tree description
1571 * @return 0 if this device tree should be used, non-zero to try the next
1573 int board_fit_config_name_match(const char *name);
1576 * board_fit_image_post_process() - Do any post-process on FIT binary data
1578 * This is used to do any sort of image manipulation, verification, decryption
1579 * etc. in a platform or board specific way. Obviously, anything done here would
1580 * need to be comprehended in how the images were prepared before being injected
1581 * into the FIT creation (i.e. the binary blobs would have been pre-processed
1582 * before being added to the FIT image).
1584 * @fit: pointer to fit image
1585 * @node: offset of image node
1586 * @image: pointer to the image start pointer
1587 * @size: pointer to the image size
1588 * @return no return value (failure should be handled internally)
1590 void board_fit_image_post_process(const void *fit, int node, void **p_image,
1593 #define FDT_ERROR ((ulong)(-1))
1595 ulong fdt_getprop_u32(const void *fdt, int node, const char *prop);
1598 * fit_find_config_node() - Find the node for the best DTB in a FIT image
1600 * A FIT image contains one or more DTBs. This function parses the
1601 * configurations described in the FIT images and returns the node of
1602 * the first matching DTB. To check if a DTB matches a board, this function
1603 * calls board_fit_config_name_match(). If no matching DTB is found, it returns
1604 * the node described by the default configuration if it exists.
1606 * @fdt: pointer to flat device tree
1607 * @return the node if found, -ve otherwise
1609 int fit_find_config_node(const void *fdt);
1612 * Mapping of image types to function handlers to be invoked on the associated
1615 * @type: Type of image, I.E. IH_TYPE_*
1616 * @handler: Function to call on loaded image
1618 struct fit_loadable_tbl {
1621 * handler() - Process a loaded image
1623 * @data: Pointer to start of loaded image data
1624 * @size: Size of loaded image data
1626 void (*handler)(ulong data, size_t size);
1630 * Define a FIT loadable image type handler
1632 * _type is a valid uimage_type ID as defined in the "Image Type" enum above
1633 * _handler is the handler function to call after this image type is loaded
1635 #define U_BOOT_FIT_LOADABLE_HANDLER(_type, _handler) \
1636 ll_entry_declare(struct fit_loadable_tbl, _function, fit_loadable) = { \
1638 .handler = _handler, \
1642 * fit_update - update storage with FIT image
1643 * @fit: Pointer to FIT image
1645 * Update firmware on storage using FIT image as input.
1646 * The storage area to be update will be identified by the name
1647 * in FIT and matching it to "dfu_alt_info" variable.
1649 * Return: 0 on success, non-zero otherwise
1651 int fit_update(const void *fit);
1653 #endif /* __IMAGE_H__ */