Convert CONFIG_MCFTMR to Kconfig
[platform/kernel/u-boot.git] / include / fs.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
4  */
5 #ifndef _FS_H
6 #define _FS_H
7
8 #include <common.h>
9 #include <rtc.h>
10
11 struct cmd_tbl;
12
13 #define FS_TYPE_ANY     0
14 #define FS_TYPE_FAT     1
15 #define FS_TYPE_EXT     2
16 #define FS_TYPE_SANDBOX 3
17 #define FS_TYPE_UBIFS   4
18 #define FS_TYPE_BTRFS   5
19 #define FS_TYPE_SQUASHFS 6
20 #define FS_TYPE_EROFS   7
21
22 struct blk_desc;
23
24 /**
25  * do_fat_fsload - Run the fatload command
26  *
27  * @cmdtp: Command information for fatload
28  * @flag: Command flags (CMD_FLAG_...)
29  * @argc: Number of arguments
30  * @argv: List of arguments
31  * Return: result (see enum command_ret_t)
32  */
33 int do_fat_fsload(struct cmd_tbl *cmdtp, int flag, int argc,
34                   char *const argv[]);
35
36 /**
37  * do_ext2load - Run the ext2load command
38  *
39  * @cmdtp: Command information for ext2load
40  * @flag: Command flags (CMD_FLAG_...)
41  * @argc: Number of arguments
42  * @argv: List of arguments
43  * Return: result (see enum command_ret_t)
44  */
45 int do_ext2load(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
46
47 /*
48  * Tell the fs layer which block device an partition to use for future
49  * commands. This also internally identifies the filesystem that is present
50  * within the partition. The identification process may be limited to a
51  * specific filesystem type by passing FS_* in the fstype parameter.
52  *
53  * Returns 0 on success.
54  * Returns non-zero if there is an error accessing the disk or partition, or
55  * no known filesystem type could be recognized on it.
56  */
57 int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype);
58
59 /*
60  * fs_set_blk_dev_with_part - Set current block device + partition
61  *
62  * Similar to fs_set_blk_dev(), but useful for cases where you already
63  * know the blk_desc and part number.
64  *
65  * Returns 0 on success.
66  * Returns non-zero if invalid partition or error accessing the disk.
67  */
68 int fs_set_blk_dev_with_part(struct blk_desc *desc, int part);
69
70 /**
71  * fs_close() - Unset current block device and partition
72  *
73  * fs_close() closes the connection to a file system opened with either
74  * fs_set_blk_dev() or fs_set_dev_with_part().
75  *
76  * Many file functions implicitly call fs_close(), e.g. fs_closedir(),
77  * fs_exist(), fs_ln(), fs_ls(), fs_mkdir(), fs_read(), fs_size(), fs_write(),
78  * fs_unlink().
79  */
80 void fs_close(void);
81
82 /**
83  * fs_get_type() - Get type of current filesystem
84  *
85  * Return: filesystem type
86  *
87  * Returns filesystem type representing the current filesystem, or
88  * FS_TYPE_ANY for any unrecognised filesystem.
89  */
90 int fs_get_type(void);
91
92 /**
93  * fs_get_type_name() - Get type of current filesystem
94  *
95  * Return: Pointer to filesystem name
96  *
97  * Returns a string describing the current filesystem, or the sentinel
98  * "unsupported" for any unrecognised filesystem.
99  */
100 const char *fs_get_type_name(void);
101
102 /*
103  * Print the list of files on the partition previously set by fs_set_blk_dev(),
104  * in directory "dirname".
105  *
106  * Returns 0 on success. Returns non-zero on error.
107  */
108 int fs_ls(const char *dirname);
109
110 /*
111  * Determine whether a file exists
112  *
113  * Returns 1 if the file exists, 0 if it doesn't exist.
114  */
115 int fs_exists(const char *filename);
116
117 /*
118  * fs_size - Determine a file's size
119  *
120  * @filename: Name of the file
121  * @size: Size of file
122  * Return: 0 if ok with valid *size, negative on error
123  */
124 int fs_size(const char *filename, loff_t *size);
125
126 /**
127  * fs_read() - read file from the partition previously set by fs_set_blk_dev()
128  *
129  * Note that not all filesystem drivers support either or both of offset != 0
130  * and len != 0.
131  *
132  * @filename:   full path of the file to read from
133  * @addr:       address of the buffer to write to
134  * @offset:     offset in the file from where to start reading
135  * @len:        the number of bytes to read. Use 0 to read entire file.
136  * @actread:    returns the actual number of bytes read
137  * Return:      0 if OK with valid *actread, -1 on error conditions
138  */
139 int fs_read(const char *filename, ulong addr, loff_t offset, loff_t len,
140             loff_t *actread);
141
142 /**
143  * fs_write() - write file to the partition previously set by fs_set_blk_dev()
144  *
145  * Note that not all filesystem drivers support offset != 0.
146  *
147  * @filename:   full path of the file to write to
148  * @addr:       address of the buffer to read from
149  * @offset:     offset in the file from where to start writing
150  * @len:        the number of bytes to write
151  * @actwrite:   returns the actual number of bytes written
152  * Return:      0 if OK with valid *actwrite, -1 on error conditions
153  */
154 int fs_write(const char *filename, ulong addr, loff_t offset, loff_t len,
155              loff_t *actwrite);
156
157 /*
158  * Directory entry types, matches the subset of DT_x in posix readdir()
159  * which apply to u-boot.
160  */
161 #define FS_DT_DIR  4         /* directory */
162 #define FS_DT_REG  8         /* regular file */
163 #define FS_DT_LNK  10        /* symbolic link */
164
165 /**
166  * struct fs_dirent - directory entry
167  *
168  * A directory entry, returned by fs_readdir(). Returns information
169  * about the file/directory at the current directory entry position.
170  */
171 struct fs_dirent {
172         /** @type:              one of FS_DT_x (not a mask) */
173         unsigned int type;
174         /** @size:              file size */
175         loff_t size;
176         /** @flags:             attribute flags (FS_ATTR_*) */
177         u32 attr;
178         /** create_time:        time of creation */
179         struct rtc_time create_time;
180         /** access_time:        time of last access */
181         struct rtc_time access_time;
182         /** change_time:        time of last modification */
183         struct rtc_time change_time;
184         /** name:               file name */
185         char name[256];
186 };
187
188 /* Note: fs_dir_stream should be treated as opaque to the user of fs layer */
189 struct fs_dir_stream {
190         /* private to fs. layer: */
191         struct blk_desc *desc;
192         int part;
193 };
194
195 /*
196  * fs_opendir - Open a directory
197  *
198  * @filename: the path to directory to open
199  * Return: a pointer to the directory stream or NULL on error and errno
200  *    set appropriately
201  */
202 struct fs_dir_stream *fs_opendir(const char *filename);
203
204 /*
205  * fs_readdir - Read the next directory entry in the directory stream.
206  *
207  * Works in an analogous way to posix readdir().  The previously returned
208  * directory entry is no longer valid after calling fs_readdir() again.
209  * After fs_closedir() is called, the returned directory entry is no
210  * longer valid.
211  *
212  * @dirs: the directory stream
213  * Return: the next directory entry (only valid until next fs_readdir() or
214  *    fs_closedir() call, do not attempt to free()) or NULL if the end of
215  *    the directory is reached.
216  */
217 struct fs_dirent *fs_readdir(struct fs_dir_stream *dirs);
218
219 /*
220  * fs_closedir - close a directory stream
221  *
222  * @dirs: the directory stream
223  */
224 void fs_closedir(struct fs_dir_stream *dirs);
225
226 /*
227  * fs_unlink - delete a file or directory
228  *
229  * If a given name is a directory, it will be deleted only if it's empty
230  *
231  * @filename: Name of file or directory to delete
232  * Return: 0 on success, -1 on error conditions
233  */
234 int fs_unlink(const char *filename);
235
236 /*
237  * fs_mkdir - Create a directory
238  *
239  * @filename: Name of directory to create
240  * Return: 0 on success, -1 on error conditions
241  */
242 int fs_mkdir(const char *filename);
243
244 /*
245  * Common implementation for various filesystem commands, optionally limited
246  * to a specific filesystem type via the fstype parameter.
247  */
248 int do_size(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
249             int fstype);
250 int do_load(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
251             int fstype);
252 int do_ls(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
253           int fstype);
254 int file_exists(const char *dev_type, const char *dev_part, const char *file,
255                 int fstype);
256 int do_save(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
257             int fstype);
258 int do_rm(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
259           int fstype);
260 int do_mkdir(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
261              int fstype);
262 int do_ln(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
263           int fstype);
264
265 /*
266  * Determine the UUID of the specified filesystem and print it. Optionally it is
267  * possible to store the UUID directly in env.
268  */
269 int do_fs_uuid(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
270                int fstype);
271
272 /*
273  * Determine the type of the specified filesystem and print it. Optionally it is
274  * possible to store the type directly in env.
275  */
276 int do_fs_type(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
277
278 /**
279  * do_fs_types - List supported filesystems.
280  *
281  * @cmdtp: Command information for fstypes
282  * @flag: Command flags (CMD_FLAG_...)
283  * @argc: Number of arguments
284  * @argv: List of arguments
285  * Return: result (see enum command_ret_t)
286  */
287 int do_fs_types(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]);
288
289 #endif /* _FS_H */