Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI
[platform/kernel/u-boot.git] / include / fs.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
4  */
5 #ifndef _FS_H
6 #define _FS_H
7
8 #include <common.h>
9 #include <rtc.h>
10
11 struct cmd_tbl;
12
13 #define FS_TYPE_ANY     0
14 #define FS_TYPE_FAT     1
15 #define FS_TYPE_EXT     2
16 #define FS_TYPE_SANDBOX 3
17 #define FS_TYPE_UBIFS   4
18 #define FS_TYPE_BTRFS   5
19 #define FS_TYPE_SQUASHFS 6
20
21 struct blk_desc;
22
23 /**
24  * do_fat_fsload - Run the fatload command
25  *
26  * @cmdtp: Command information for fatload
27  * @flag: Command flags (CMD_FLAG_...)
28  * @argc: Number of arguments
29  * @argv: List of arguments
30  * @return result (see enum command_ret_t)
31  */
32 int do_fat_fsload(struct cmd_tbl *cmdtp, int flag, int argc,
33                   char *const argv[]);
34
35 /**
36  * do_ext2load - Run the ext2load command
37  *
38  * @cmdtp: Command information for ext2load
39  * @flag: Command flags (CMD_FLAG_...)
40  * @argc: Number of arguments
41  * @argv: List of arguments
42  * @return result (see enum command_ret_t)
43  */
44 int do_ext2load(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
45
46 /*
47  * Tell the fs layer which block device an partition to use for future
48  * commands. This also internally identifies the filesystem that is present
49  * within the partition. The identification process may be limited to a
50  * specific filesystem type by passing FS_* in the fstype parameter.
51  *
52  * Returns 0 on success.
53  * Returns non-zero if there is an error accessing the disk or partition, or
54  * no known filesystem type could be recognized on it.
55  */
56 int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype);
57
58 /*
59  * fs_set_blk_dev_with_part - Set current block device + partition
60  *
61  * Similar to fs_set_blk_dev(), but useful for cases where you already
62  * know the blk_desc and part number.
63  *
64  * Returns 0 on success.
65  * Returns non-zero if invalid partition or error accessing the disk.
66  */
67 int fs_set_blk_dev_with_part(struct blk_desc *desc, int part);
68
69 /**
70  * fs_close() - Unset current block device and partition
71  *
72  * fs_close() closes the connection to a file system opened with either
73  * fs_set_blk_dev() or fs_set_dev_with_part().
74  *
75  * Many file functions implicitly call fs_close(), e.g. fs_closedir(),
76  * fs_exist(), fs_ln(), fs_ls(), fs_mkdir(), fs_read(), fs_size(), fs_write(),
77  * fs_unlink().
78  */
79 void fs_close(void);
80
81 /**
82  * fs_get_type() - Get type of current filesystem
83  *
84  * Return: filesystem type
85  *
86  * Returns filesystem type representing the current filesystem, or
87  * FS_TYPE_ANY for any unrecognised filesystem.
88  */
89 int fs_get_type(void);
90
91 /**
92  * fs_get_type_name() - Get type of current filesystem
93  *
94  * Return: Pointer to filesystem name
95  *
96  * Returns a string describing the current filesystem, or the sentinel
97  * "unsupported" for any unrecognised filesystem.
98  */
99 const char *fs_get_type_name(void);
100
101 /*
102  * Print the list of files on the partition previously set by fs_set_blk_dev(),
103  * in directory "dirname".
104  *
105  * Returns 0 on success. Returns non-zero on error.
106  */
107 int fs_ls(const char *dirname);
108
109 /*
110  * Determine whether a file exists
111  *
112  * Returns 1 if the file exists, 0 if it doesn't exist.
113  */
114 int fs_exists(const char *filename);
115
116 /*
117  * fs_size - Determine a file's size
118  *
119  * @filename: Name of the file
120  * @size: Size of file
121  * @return 0 if ok with valid *size, negative on error
122  */
123 int fs_size(const char *filename, loff_t *size);
124
125 /**
126  * fs_read() - read file from the partition previously set by fs_set_blk_dev()
127  *
128  * Note that not all filesystem drivers support either or both of offset != 0
129  * and len != 0.
130  *
131  * @filename:   full path of the file to read from
132  * @addr:       address of the buffer to write to
133  * @offset:     offset in the file from where to start reading
134  * @len:        the number of bytes to read. Use 0 to read entire file.
135  * @actread:    returns the actual number of bytes read
136  * Return:      0 if OK with valid *actread, -1 on error conditions
137  */
138 int fs_read(const char *filename, ulong addr, loff_t offset, loff_t len,
139             loff_t *actread);
140
141 /**
142  * fs_write() - write file to the partition previously set by fs_set_blk_dev()
143  *
144  * Note that not all filesystem drivers support offset != 0.
145  *
146  * @filename:   full path of the file to write to
147  * @addr:       address of the buffer to read from
148  * @offset:     offset in the file from where to start writing
149  * @len:        the number of bytes to write
150  * @actwrite:   returns the actual number of bytes written
151  * Return:      0 if OK with valid *actwrite, -1 on error conditions
152  */
153 int fs_write(const char *filename, ulong addr, loff_t offset, loff_t len,
154              loff_t *actwrite);
155
156 /*
157  * Directory entry types, matches the subset of DT_x in posix readdir()
158  * which apply to u-boot.
159  */
160 #define FS_DT_DIR  4         /* directory */
161 #define FS_DT_REG  8         /* regular file */
162 #define FS_DT_LNK  10        /* symbolic link */
163
164 /**
165  * struct fs_dirent - directory entry
166  *
167  * A directory entry, returned by fs_readdir(). Returns information
168  * about the file/directory at the current directory entry position.
169  */
170 struct fs_dirent {
171         /** @type:              one of FS_DT_x (not a mask) */
172         unsigned int type;
173         /** @size:              file size */
174         loff_t size;
175         /** @flags:             attribute flags (FS_ATTR_*) */
176         u32 attr;
177         /** create_time:        time of creation */
178         struct rtc_time create_time;
179         /** access_time:        time of last access */
180         struct rtc_time access_time;
181         /** change_time:        time of last modification */
182         struct rtc_time change_time;
183         /** name:               file name */
184         char name[256];
185 };
186
187 /* Note: fs_dir_stream should be treated as opaque to the user of fs layer */
188 struct fs_dir_stream {
189         /* private to fs. layer: */
190         struct blk_desc *desc;
191         int part;
192 };
193
194 /*
195  * fs_opendir - Open a directory
196  *
197  * @filename: the path to directory to open
198  * @return a pointer to the directory stream or NULL on error and errno
199  *    set appropriately
200  */
201 struct fs_dir_stream *fs_opendir(const char *filename);
202
203 /*
204  * fs_readdir - Read the next directory entry in the directory stream.
205  *
206  * Works in an analogous way to posix readdir().  The previously returned
207  * directory entry is no longer valid after calling fs_readdir() again.
208  * After fs_closedir() is called, the returned directory entry is no
209  * longer valid.
210  *
211  * @dirs: the directory stream
212  * @return the next directory entry (only valid until next fs_readdir() or
213  *    fs_closedir() call, do not attempt to free()) or NULL if the end of
214  *    the directory is reached.
215  */
216 struct fs_dirent *fs_readdir(struct fs_dir_stream *dirs);
217
218 /*
219  * fs_closedir - close a directory stream
220  *
221  * @dirs: the directory stream
222  */
223 void fs_closedir(struct fs_dir_stream *dirs);
224
225 /*
226  * fs_unlink - delete a file or directory
227  *
228  * If a given name is a directory, it will be deleted only if it's empty
229  *
230  * @filename: Name of file or directory to delete
231  * @return 0 on success, -1 on error conditions
232  */
233 int fs_unlink(const char *filename);
234
235 /*
236  * fs_mkdir - Create a directory
237  *
238  * @filename: Name of directory to create
239  * @return 0 on success, -1 on error conditions
240  */
241 int fs_mkdir(const char *filename);
242
243 /*
244  * Common implementation for various filesystem commands, optionally limited
245  * to a specific filesystem type via the fstype parameter.
246  */
247 int do_size(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
248             int fstype);
249 int do_load(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
250             int fstype);
251 int do_ls(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
252           int fstype);
253 int file_exists(const char *dev_type, const char *dev_part, const char *file,
254                 int fstype);
255 int do_save(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
256             int fstype);
257 int do_rm(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
258           int fstype);
259 int do_mkdir(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
260              int fstype);
261 int do_ln(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
262           int fstype);
263
264 /*
265  * Determine the UUID of the specified filesystem and print it. Optionally it is
266  * possible to store the UUID directly in env.
267  */
268 int do_fs_uuid(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[],
269                int fstype);
270
271 /*
272  * Determine the type of the specified filesystem and print it. Optionally it is
273  * possible to store the type directly in env.
274  */
275 int do_fs_type(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
276
277 /**
278  * do_fs_types - List supported filesystems.
279  *
280  * @cmdtp: Command information for fstypes
281  * @flag: Command flags (CMD_FLAG_...)
282  * @argc: Number of arguments
283  * @argv: List of arguments
284  * @return result (see enum command_ret_t)
285  */
286 int do_fs_types(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]);
287
288 #endif /* _FS_H */