acpi: Support writing a string
[platform/kernel/u-boot.git] / include / fm_eth.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2009-2012 Freescale Semiconductor, Inc.
4  * Copyright 2019 NXP
5  */
6
7 #ifndef __FM_ETH_H__
8 #define __FM_ETH_H__
9
10 #include <common.h>
11 #include <phy.h>
12 #include <asm/types.h>
13
14 enum fm_port {
15         FM1_DTSEC1,
16         FM1_DTSEC2,
17         FM1_DTSEC3,
18         FM1_DTSEC4,
19         FM1_DTSEC5,
20         FM1_DTSEC6,
21         FM1_DTSEC9,
22         FM1_DTSEC10,
23         FM1_10GEC1,
24         FM1_10GEC2,
25         FM1_10GEC3,
26         FM1_10GEC4,
27         FM2_DTSEC1,
28         FM2_DTSEC2,
29         FM2_DTSEC3,
30         FM2_DTSEC4,
31         FM2_DTSEC5,
32         FM2_DTSEC6,
33         FM2_DTSEC9,
34         FM2_DTSEC10,
35         FM2_10GEC1,
36         FM2_10GEC2,
37         NUM_FM_PORTS,
38 };
39
40 enum fm_eth_type {
41         FM_ETH_1G_E,
42         FM_ETH_10G_E,
43 };
44
45 /* Historically, on FMan v3 platforms, the first MDIO bus has been used for
46  * Clause 22 PHYs and the second MDIO bus for 10G Clause 45 PHYs (thus the
47  * TGEC name).
48  *
49  * On LS1046A-FRWY, the QSGMII PHY is connected to the second MDIO bus,
50  * and no TGEC ports are present on-board.
51  */
52 #ifdef CONFIG_SYS_FMAN_V3
53 #ifdef CONFIG_TARGET_LS1046AFRWY
54 #define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR  (CONFIG_SYS_FSL_FM1_ADDR + 0xfd000)
55 #else
56 #define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR  (CONFIG_SYS_FSL_FM1_ADDR + 0xfc000)
57 #endif
58 #define CONFIG_SYS_FM1_TGEC_MDIO_ADDR   (CONFIG_SYS_FSL_FM1_ADDR + 0xfd000)
59 #if (CONFIG_SYS_NUM_FMAN == 2)
60 #define CONFIG_SYS_FM2_DTSEC_MDIO_ADDR  (CONFIG_SYS_FSL_FM2_ADDR + 0xfc000)
61 #define CONFIG_SYS_FM2_TGEC_MDIO_ADDR   (CONFIG_SYS_FSL_FM2_ADDR + 0xfd000)
62 #endif
63 #else
64 #define CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xe1120)
65 #define CONFIG_SYS_FM1_TGEC_MDIO_ADDR   (CONFIG_SYS_FSL_FM1_ADDR + 0xf1000)
66 #endif
67
68 #define DEFAULT_FM_MDIO_NAME "FSL_MDIO0"
69 #define DEFAULT_FM_TGEC_MDIO_NAME "FM_TGEC_MDIO"
70
71 /* Fman ethernet info struct */
72 #define FM_ETH_INFO_INITIALIZER(idx, pregs) \
73         .fm             = idx,                                          \
74         .phy_regs       = (void *)pregs,                                \
75         .enet_if        = PHY_INTERFACE_MODE_NONE,                      \
76
77 #ifdef CONFIG_SYS_FMAN_V3
78 #define FM_DTSEC_INFO_INITIALIZER(idx, n) \
79 {                                                                       \
80         FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC_MDIO_ADDR)    \
81         .index          = idx,                                          \
82         .num            = n - 1,                                        \
83         .type           = FM_ETH_1G_E,                                  \
84         .port           = FM##idx##_DTSEC##n,                           \
85         .rx_port_id     = RX_PORT_1G_BASE + n - 1,                      \
86         .tx_port_id     = TX_PORT_1G_BASE + n - 1,                      \
87         .compat_offset  = CONFIG_SYS_FSL_FM##idx##_OFFSET +             \
88                                 offsetof(struct ccsr_fman, memac[n-1]),\
89 }
90
91 #ifdef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
92 #define FM_TGEC_INFO_INITIALIZER(idx, n) \
93 {                                                                       \
94         FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR)     \
95         .index          = idx,                                          \
96         .num            = n - 1,                                        \
97         .type           = FM_ETH_10G_E,                                 \
98         .port           = FM##idx##_10GEC##n,                           \
99         .rx_port_id     = RX_PORT_10G_BASE2 + n - 1,                    \
100         .tx_port_id     = TX_PORT_10G_BASE2 + n - 1,                    \
101         .compat_offset  = CONFIG_SYS_FSL_FM##idx##_OFFSET +             \
102                                  offsetof(struct ccsr_fman, memac[n-1]),\
103 }
104 #else
105 #if (CONFIG_SYS_NUM_FMAN == 2)
106 #define FM_TGEC_INFO_INITIALIZER(idx, n) \
107 {                                                                       \
108         FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM2_TGEC_MDIO_ADDR)     \
109         .index          = idx,                                          \
110         .num            = n - 1,                                        \
111         .type           = FM_ETH_10G_E,                                 \
112         .port           = FM##idx##_10GEC##n,                           \
113         .rx_port_id     = RX_PORT_10G_BASE + n - 1,                     \
114         .tx_port_id     = TX_PORT_10G_BASE + n - 1,                     \
115         .compat_offset  = CONFIG_SYS_FSL_FM##idx##_OFFSET +             \
116                                 offsetof(struct ccsr_fman, memac[n-1+8]),\
117 }
118 #else
119 #define FM_TGEC_INFO_INITIALIZER(idx, n) \
120 {                                                                       \
121         FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR)     \
122         .index          = idx,                                          \
123         .num            = n - 1,                                        \
124         .type           = FM_ETH_10G_E,                                 \
125         .port           = FM##idx##_10GEC##n,                           \
126         .rx_port_id     = RX_PORT_10G_BASE + n - 1,                     \
127         .tx_port_id     = TX_PORT_10G_BASE + n - 1,                     \
128         .compat_offset  = CONFIG_SYS_FSL_FM##idx##_OFFSET +             \
129                                 offsetof(struct ccsr_fman, memac[n-1+8]),\
130 }
131 #endif
132 #endif
133
134 #if (CONFIG_SYS_NUM_FM1_10GEC >= 3)
135 #define FM_TGEC_INFO_INITIALIZER2(idx, n) \
136 {                                                                       \
137         FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR)     \
138         .index          = idx,                                          \
139         .num            = n - 1,                                        \
140         .type           = FM_ETH_10G_E,                                 \
141         .port           = FM##idx##_10GEC##n,                           \
142         .rx_port_id     = RX_PORT_10G_BASE2 + n - 3,                    \
143         .tx_port_id     = TX_PORT_10G_BASE2 + n - 3,                    \
144         .compat_offset  = CONFIG_SYS_FSL_FM##idx##_OFFSET +             \
145                                 offsetof(struct ccsr_fman, memac[n-1-2]),\
146 }
147 #endif
148
149 #else
150 #define FM_DTSEC_INFO_INITIALIZER(idx, n) \
151 {                                                                       \
152         FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR)   \
153         .index          = idx,                                          \
154         .num            = n - 1,                                        \
155         .type           = FM_ETH_1G_E,                                  \
156         .port           = FM##idx##_DTSEC##n,                           \
157         .rx_port_id     = RX_PORT_1G_BASE + n - 1,                      \
158         .tx_port_id     = TX_PORT_1G_BASE + n - 1,                      \
159         .compat_offset  = CONFIG_SYS_FSL_FM##idx##_OFFSET +             \
160                                 offsetof(struct ccsr_fman, mac_1g[n-1]),\
161 }
162
163 #define FM_TGEC_INFO_INITIALIZER(idx, n) \
164 {                                                                       \
165         FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR)     \
166         .index          = idx,                                          \
167         .num            = n - 1,                                        \
168         .type           = FM_ETH_10G_E,                                 \
169         .port           = FM##idx##_10GEC##n,                           \
170         .rx_port_id     = RX_PORT_10G_BASE + n - 1,                     \
171         .tx_port_id     = TX_PORT_10G_BASE + n - 1,                     \
172         .compat_offset  = CONFIG_SYS_FSL_FM##idx##_OFFSET +             \
173                                 offsetof(struct ccsr_fman, mac_10g[n-1]),\
174 }
175 #endif
176 struct fm_eth_info {
177         u8 enabled;
178         u8 fm;
179         u8 num;
180         u8 phy_addr;
181         int index;
182         u16 rx_port_id;
183         u16 tx_port_id;
184         enum fm_port port;
185         enum fm_eth_type type;
186         void *phy_regs;
187         phy_interface_t enet_if;
188         u32 compat_offset;
189         struct mii_dev *bus;
190 };
191
192 struct tgec_mdio_info {
193         struct tgec_mdio_controller *regs;
194         char *name;
195 };
196
197 struct memac_mdio_info {
198         struct memac_mdio_controller *regs;
199         char *name;
200 };
201
202 int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info);
203 int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info);
204
205 int fm_standard_init(bd_t *bis);
206 void fman_enet_init(void);
207 void fdt_fixup_fman_ethernet(void *fdt);
208 phy_interface_t fm_info_get_enet_if(enum fm_port port);
209 void fm_info_set_phy_address(enum fm_port port, int address);
210 int fm_info_get_phy_address(enum fm_port port);
211 void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus);
212 void fm_disable_port(enum fm_port port);
213 void fm_enable_port(enum fm_port port);
214 void set_sgmii_phy(struct mii_dev *bus, enum fm_port base_port,
215                 unsigned int port_num, int phy_base_addr);
216 int is_qsgmii_riser_card(struct mii_dev *bus, int phy_base_addr,
217                 unsigned int port_num, unsigned regnum);
218
219 #endif