2 * Copyright © 2006 Keith Packard
3 * Copyright © 2007-2008 Dave Airlie
4 * Copyright © 2007-2008 Intel Corporation
5 * Jesse Barnes <jesse.barnes@intel.com>
6 * Copyright © 2011-2013 Intel Corporation
7 * Copyright © 2015 Intel Corporation
8 * Daniel Vetter <daniel.vetter@ffwll.ch>
10 * Permission is hereby granted, free of charge, to any person obtaining a
11 * copy of this software and associated documentation files (the "Software"),
12 * to deal in the Software without restriction, including without limitation
13 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
14 * and/or sell copies of the Software, and to permit persons to whom the
15 * Software is furnished to do so, subject to the following conditions:
17 * The above copyright notice and this permission notice shall be included in
18 * all copies or substantial portions of the Software.
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
21 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
22 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
23 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
24 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
25 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
26 * OTHER DEALINGS IN THE SOFTWARE.
29 #ifndef __DRM_MODESET_HELPER_VTABLES_H__
30 #define __DRM_MODESET_HELPER_VTABLES_H__
32 #include <drm/drm_crtc.h>
33 #include <drm/drm_encoder.h>
38 * The DRM mode setting helper functions are common code for drivers to use if
39 * they wish. Drivers are not forced to use this code in their
40 * implementations but it would be useful if the code they do use at least
41 * provides a consistent interface and operation to userspace. Therefore it is
42 * highly recommended to use the provided helpers as much as possible.
44 * Because there is only one pointer per modeset object to hold a vfunc table
45 * for helper libraries they are by necessity shared among the different
48 * To make this clear all the helper vtables are pulled together in this location here.
51 struct drm_writeback_connector;
52 struct drm_writeback_job;
54 enum mode_set_atomic {
55 LEAVE_ATOMIC_MODE_SET,
56 ENTER_ATOMIC_MODE_SET,
60 * struct drm_crtc_helper_funcs - helper operations for CRTCs
62 * These hooks are used by the legacy CRTC helpers and the new atomic
63 * modesetting helpers.
65 struct drm_crtc_helper_funcs {
69 * Callback to control power levels on the CRTC. If the mode passed in
70 * is unsupported, the provider must use the next lowest power level.
71 * This is used by the legacy CRTC helpers to implement DPMS
72 * functionality in drm_helper_connector_dpms().
74 * This callback is also used to disable a CRTC by calling it with
75 * DRM_MODE_DPMS_OFF if the @disable hook isn't used.
77 * This callback is used by the legacy CRTC helpers. Atomic helpers
78 * also support using this hook for enabling and disabling a CRTC to
79 * facilitate transitions to atomic, but it is deprecated. Instead
80 * @atomic_enable and @atomic_disable should be used.
82 void (*dpms)(struct drm_crtc *crtc, int mode);
87 * This callback should prepare the CRTC for a subsequent modeset, which
88 * in practice means the driver should disable the CRTC if it is
89 * running. Most drivers ended up implementing this by calling their
90 * @dpms hook with DRM_MODE_DPMS_OFF.
92 * This callback is used by the legacy CRTC helpers. Atomic helpers
93 * also support using this hook for disabling a CRTC to facilitate
94 * transitions to atomic, but it is deprecated. Instead @atomic_disable
97 void (*prepare)(struct drm_crtc *crtc);
102 * This callback should commit the new mode on the CRTC after a modeset,
103 * which in practice means the driver should enable the CRTC. Most
104 * drivers ended up implementing this by calling their @dpms hook with
107 * This callback is used by the legacy CRTC helpers. Atomic helpers
108 * also support using this hook for enabling a CRTC to facilitate
109 * transitions to atomic, but it is deprecated. Instead @atomic_enable
112 void (*commit)(struct drm_crtc *crtc);
117 * This callback is used to check if a specific mode is valid in this
118 * crtc. This should be implemented if the crtc has some sort of
119 * restriction in the modes it can display. For example, a given crtc
120 * may be responsible to set a clock value. If the clock can not
121 * produce all the values for the available modes then this callback
122 * can be used to restrict the number of modes to only the ones that
125 * This hook is used by the probe helpers to filter the mode list in
126 * drm_helper_probe_single_connector_modes(), and it is used by the
127 * atomic helpers to validate modes supplied by userspace in
128 * drm_atomic_helper_check_modeset().
130 * This function is optional.
134 * Since this function is both called from the check phase of an atomic
135 * commit, and the mode validation in the probe paths it is not allowed
136 * to look at anything else but the passed-in mode, and validate it
137 * against configuration-invariant hardward constraints. Any further
138 * limits which depend upon the configuration can only be checked in
139 * @mode_fixup or @atomic_check.
143 * drm_mode_status Enum
145 enum drm_mode_status (*mode_valid)(struct drm_crtc *crtc,
146 const struct drm_display_mode *mode);
151 * This callback is used to validate a mode. The parameter mode is the
152 * display mode that userspace requested, adjusted_mode is the mode the
153 * encoders need to be fed with. Note that this is the inverse semantics
154 * of the meaning for the &drm_encoder and &drm_bridge_funcs.mode_fixup
155 * vfunc. If the CRTC cannot support the requested conversion from mode
156 * to adjusted_mode it should reject the modeset. See also
157 * &drm_crtc_state.adjusted_mode for more details.
159 * This function is used by both legacy CRTC helpers and atomic helpers.
160 * With atomic helpers it is optional.
164 * This function is called in the check phase of atomic modesets, which
165 * can be aborted for any reason (including on userspace's request to
166 * just check whether a configuration would be possible). Atomic drivers
167 * MUST NOT touch any persistent state (hardware or software) or data
168 * structures except the passed in adjusted_mode parameter.
170 * This is in contrast to the legacy CRTC helpers where this was
173 * Atomic drivers which need to inspect and adjust more state should
174 * instead use the @atomic_check callback, but note that they're not
175 * perfectly equivalent: @mode_valid is called from
176 * drm_atomic_helper_check_modeset(), but @atomic_check is called from
177 * drm_atomic_helper_check_planes(), because originally it was meant for
178 * plane update checks only.
180 * Also beware that userspace can request its own custom modes, neither
181 * core nor helpers filter modes to the list of probe modes reported by
182 * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure
183 * that modes are filtered consistently put any CRTC constraints and
184 * limits checks into @mode_valid.
188 * True if an acceptable configuration is possible, false if the modeset
189 * operation should be rejected.
191 bool (*mode_fixup)(struct drm_crtc *crtc,
192 const struct drm_display_mode *mode,
193 struct drm_display_mode *adjusted_mode);
198 * This callback is used by the legacy CRTC helpers to set a new mode,
199 * position and framebuffer. Since it ties the primary plane to every
200 * mode change it is incompatible with universal plane support. And
201 * since it can't update other planes it's incompatible with atomic
204 * This callback is only used by CRTC helpers and deprecated.
208 * 0 on success or a negative error code on failure.
210 int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
211 struct drm_display_mode *adjusted_mode, int x, int y,
212 struct drm_framebuffer *old_fb);
217 * This callback is used to update the display mode of a CRTC without
218 * changing anything of the primary plane configuration. This fits the
219 * requirement of atomic and hence is used by the atomic helpers.
221 * Note that the display pipe is completely off when this function is
222 * called. Atomic drivers which need hardware to be running before they
223 * program the new display mode (e.g. because they implement runtime PM)
224 * should not use this hook. This is because the helper library calls
225 * this hook only once per mode change and not every time the display
226 * pipeline is suspended using either DPMS or the new "ACTIVE" property.
227 * Which means register values set in this callback might get reset when
228 * the CRTC is suspended, but not restored. Such drivers should instead
229 * move all their CRTC setup into the @atomic_enable callback.
231 * This callback is optional.
233 void (*mode_set_nofb)(struct drm_crtc *crtc);
238 * This callback is used by the legacy CRTC helpers to set a new
239 * framebuffer and scanout position. It is optional and used as an
240 * optimized fast-path instead of a full mode set operation with all the
241 * resulting flickering. If it is not present
242 * drm_crtc_helper_set_config() will fall back to a full modeset, using
243 * the @mode_set callback. Since it can't update other planes it's
244 * incompatible with atomic modeset support.
246 * This callback is only used by the CRTC helpers and deprecated.
250 * 0 on success or a negative error code on failure.
252 int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
253 struct drm_framebuffer *old_fb);
256 * @mode_set_base_atomic:
258 * This callback is used by the fbdev helpers to set a new framebuffer
259 * and scanout without sleeping, i.e. from an atomic calling context. It
260 * is only used to implement kgdb support.
262 * This callback is optional and only needed for kgdb support in the fbdev
267 * 0 on success or a negative error code on failure.
269 int (*mode_set_base_atomic)(struct drm_crtc *crtc,
270 struct drm_framebuffer *fb, int x, int y,
271 enum mode_set_atomic);
276 * This callback should be used to disable the CRTC. With the atomic
277 * drivers it is called after all encoders connected to this CRTC have
278 * been shut off already using their own
279 * &drm_encoder_helper_funcs.disable hook. If that sequence is too
280 * simple drivers can just add their own hooks and call it from this
281 * CRTC callback here by looping over all encoders connected to it using
282 * for_each_encoder_on_crtc().
284 * This hook is used both by legacy CRTC helpers and atomic helpers.
285 * Atomic drivers don't need to implement it if there's no need to
286 * disable anything at the CRTC level. To ensure that runtime PM
287 * handling (using either DPMS or the new "ACTIVE" property) works
288 * @disable must be the inverse of @atomic_enable for atomic drivers.
289 * Atomic drivers should consider to use @atomic_disable instead of
294 * With legacy CRTC helpers there's a big semantic difference between
295 * @disable and other hooks (like @prepare or @dpms) used to shut down a
296 * CRTC: @disable is only called when also logically disabling the
297 * display pipeline and needs to release any resources acquired in
298 * @mode_set (like shared PLLs, or again release pinned framebuffers).
300 * Therefore @disable must be the inverse of @mode_set plus @commit for
301 * drivers still using legacy CRTC helpers, which is different from the
302 * rules under atomic.
304 void (*disable)(struct drm_crtc *crtc);
309 * Drivers should check plane-update related CRTC constraints in this
310 * hook. They can also check mode related limitations but need to be
311 * aware of the calling order, since this hook is used by
312 * drm_atomic_helper_check_planes() whereas the preparations needed to
313 * check output routing and the display mode is done in
314 * drm_atomic_helper_check_modeset(). Therefore drivers that want to
315 * check output routing and display mode constraints in this callback
316 * must ensure that drm_atomic_helper_check_modeset() has been called
317 * beforehand. This is calling order used by the default helper
318 * implementation in drm_atomic_helper_check().
320 * When using drm_atomic_helper_check_planes() this hook is called
321 * after the &drm_plane_helper_funcs.atomic_check hook for planes, which
322 * allows drivers to assign shared resources requested by planes in this
323 * callback here. For more complicated dependencies the driver can call
324 * the provided check helpers multiple times until the computed state
325 * has a final configuration and everything has been checked.
327 * This function is also allowed to inspect any other object's state and
328 * can add more state objects to the atomic commit if needed. Care must
329 * be taken though to ensure that state check and compute functions for
330 * these added states are all called, and derived state in other objects
331 * all updated. Again the recommendation is to just call check helpers
332 * until a maximal configuration is reached.
334 * This callback is used by the atomic modeset helpers, but it is
339 * This function is called in the check phase of an atomic update. The
340 * driver is not allowed to change anything outside of the free-standing
341 * state object passed-in.
343 * Also beware that userspace can request its own custom modes, neither
344 * core nor helpers filter modes to the list of probe modes reported by
345 * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure
346 * that modes are filtered consistently put any CRTC constraints and
347 * limits checks into @mode_valid.
351 * 0 on success, -EINVAL if the state or the transition can't be
352 * supported, -ENOMEM on memory allocation failure and -EDEADLK if an
353 * attempt to obtain another state object ran into a &drm_modeset_lock
356 int (*atomic_check)(struct drm_crtc *crtc,
357 struct drm_atomic_state *state);
362 * Drivers should prepare for an atomic update of multiple planes on
363 * a CRTC in this hook. Depending upon hardware this might be vblank
364 * evasion, blocking updates by setting bits or doing preparatory work
365 * for e.g. manual update display.
367 * This hook is called before any plane commit functions are called.
369 * Note that the power state of the display pipe when this function is
370 * called depends upon the exact helpers and calling sequence the driver
371 * has picked. See drm_atomic_helper_commit_planes() for a discussion of
372 * the tradeoffs and variants of plane commit helpers.
374 * This callback is used by the atomic modeset helpers, but it is
377 void (*atomic_begin)(struct drm_crtc *crtc,
378 struct drm_atomic_state *state);
382 * Drivers should finalize an atomic update of multiple planes on
383 * a CRTC in this hook. Depending upon hardware this might include
384 * checking that vblank evasion was successful, unblocking updates by
385 * setting bits or setting the GO bit to flush out all updates.
387 * Simple hardware or hardware with special requirements can commit and
388 * flush out all updates for all planes from this hook and forgo all the
389 * other commit hooks for plane updates.
391 * This hook is called after any plane commit functions are called.
393 * Note that the power state of the display pipe when this function is
394 * called depends upon the exact helpers and calling sequence the driver
395 * has picked. See drm_atomic_helper_commit_planes() for a discussion of
396 * the tradeoffs and variants of plane commit helpers.
398 * This callback is used by the atomic modeset helpers, but it is
401 void (*atomic_flush)(struct drm_crtc *crtc,
402 struct drm_atomic_state *state);
407 * This callback should be used to enable the CRTC. With the atomic
408 * drivers it is called before all encoders connected to this CRTC are
409 * enabled through the encoder's own &drm_encoder_helper_funcs.enable
410 * hook. If that sequence is too simple drivers can just add their own
411 * hooks and call it from this CRTC callback here by looping over all
412 * encoders connected to it using for_each_encoder_on_crtc().
414 * This hook is used only by atomic helpers, for symmetry with
415 * @atomic_disable. Atomic drivers don't need to implement it if there's
416 * no need to enable anything at the CRTC level. To ensure that runtime
417 * PM handling (using either DPMS or the new "ACTIVE" property) works
418 * @atomic_enable must be the inverse of @atomic_disable for atomic
421 * This function is optional.
423 void (*atomic_enable)(struct drm_crtc *crtc,
424 struct drm_atomic_state *state);
429 * This callback should be used to disable the CRTC. With the atomic
430 * drivers it is called after all encoders connected to this CRTC have
431 * been shut off already using their own
432 * &drm_encoder_helper_funcs.disable hook. If that sequence is too
433 * simple drivers can just add their own hooks and call it from this
434 * CRTC callback here by looping over all encoders connected to it using
435 * for_each_encoder_on_crtc().
437 * This hook is used only by atomic helpers. Atomic drivers don't
438 * need to implement it if there's no need to disable anything at the
441 * This function is optional.
443 void (*atomic_disable)(struct drm_crtc *crtc,
444 struct drm_atomic_state *state);
447 * @get_scanout_position:
449 * Called by vblank timestamping code.
451 * Returns the current display scanout position from a CRTC and an
452 * optional accurate ktime_get() timestamp of when the position was
453 * measured. Note that this is a helper callback which is only used
454 * if a driver uses drm_crtc_vblank_helper_get_vblank_timestamp()
455 * for the @drm_crtc_funcs.get_vblank_timestamp callback.
462 * True when called from drm_crtc_handle_vblank(). Some drivers
463 * need to apply some workarounds for gpu-specific vblank irq
464 * quirks if the flag is set.
466 * Target location for current vertical scanout position.
468 * Target location for current horizontal scanout position.
470 * Target location for timestamp taken immediately before
471 * scanout position query. Can be NULL to skip timestamp.
473 * Target location for timestamp taken immediately after
474 * scanout position query. Can be NULL to skip timestamp.
476 * Current display timings.
478 * Returns vpos as a positive number while in active scanout area.
479 * Returns vpos as a negative number inside vblank, counting the number
480 * of scanlines to go until end of vblank, e.g., -1 means "one scanline
481 * until start of active scanout / end of vblank."
485 * True on success, false if a reliable scanout position counter could
488 bool (*get_scanout_position)(struct drm_crtc *crtc,
489 bool in_vblank_irq, int *vpos, int *hpos,
490 ktime_t *stime, ktime_t *etime,
491 const struct drm_display_mode *mode);
495 * drm_crtc_helper_add - sets the helper vtable for a crtc
497 * @funcs: helper vtable to set for @crtc
499 static inline void drm_crtc_helper_add(struct drm_crtc *crtc,
500 const struct drm_crtc_helper_funcs *funcs)
502 crtc->helper_private = funcs;
506 * struct drm_encoder_helper_funcs - helper operations for encoders
508 * These hooks are used by the legacy CRTC helpers and the new atomic
509 * modesetting helpers.
511 struct drm_encoder_helper_funcs {
515 * Callback to control power levels on the encoder. If the mode passed in
516 * is unsupported, the provider must use the next lowest power level.
517 * This is used by the legacy encoder helpers to implement DPMS
518 * functionality in drm_helper_connector_dpms().
520 * This callback is also used to disable an encoder by calling it with
521 * DRM_MODE_DPMS_OFF if the @disable hook isn't used.
523 * This callback is used by the legacy CRTC helpers. Atomic helpers
524 * also support using this hook for enabling and disabling an encoder to
525 * facilitate transitions to atomic, but it is deprecated. Instead
526 * @enable and @disable should be used.
528 void (*dpms)(struct drm_encoder *encoder, int mode);
533 * This callback is used to check if a specific mode is valid in this
534 * encoder. This should be implemented if the encoder has some sort
535 * of restriction in the modes it can display. For example, a given
536 * encoder may be responsible to set a clock value. If the clock can
537 * not produce all the values for the available modes then this callback
538 * can be used to restrict the number of modes to only the ones that
541 * This hook is used by the probe helpers to filter the mode list in
542 * drm_helper_probe_single_connector_modes(), and it is used by the
543 * atomic helpers to validate modes supplied by userspace in
544 * drm_atomic_helper_check_modeset().
546 * This function is optional.
550 * Since this function is both called from the check phase of an atomic
551 * commit, and the mode validation in the probe paths it is not allowed
552 * to look at anything else but the passed-in mode, and validate it
553 * against configuration-invariant hardward constraints. Any further
554 * limits which depend upon the configuration can only be checked in
555 * @mode_fixup or @atomic_check.
559 * drm_mode_status Enum
561 enum drm_mode_status (*mode_valid)(struct drm_encoder *crtc,
562 const struct drm_display_mode *mode);
567 * This callback is used to validate and adjust a mode. The parameter
568 * mode is the display mode that should be fed to the next element in
569 * the display chain, either the final &drm_connector or a &drm_bridge.
570 * The parameter adjusted_mode is the input mode the encoder requires. It
571 * can be modified by this callback and does not need to match mode. See
572 * also &drm_crtc_state.adjusted_mode for more details.
574 * This function is used by both legacy CRTC helpers and atomic helpers.
575 * This hook is optional.
579 * This function is called in the check phase of atomic modesets, which
580 * can be aborted for any reason (including on userspace's request to
581 * just check whether a configuration would be possible). Atomic drivers
582 * MUST NOT touch any persistent state (hardware or software) or data
583 * structures except the passed in adjusted_mode parameter.
585 * This is in contrast to the legacy CRTC helpers where this was
588 * Atomic drivers which need to inspect and adjust more state should
589 * instead use the @atomic_check callback. If @atomic_check is used,
590 * this hook isn't called since @atomic_check allows a strict superset
591 * of the functionality of @mode_fixup.
593 * Also beware that userspace can request its own custom modes, neither
594 * core nor helpers filter modes to the list of probe modes reported by
595 * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure
596 * that modes are filtered consistently put any encoder constraints and
597 * limits checks into @mode_valid.
601 * True if an acceptable configuration is possible, false if the modeset
602 * operation should be rejected.
604 bool (*mode_fixup)(struct drm_encoder *encoder,
605 const struct drm_display_mode *mode,
606 struct drm_display_mode *adjusted_mode);
611 * This callback should prepare the encoder for a subsequent modeset,
612 * which in practice means the driver should disable the encoder if it
613 * is running. Most drivers ended up implementing this by calling their
614 * @dpms hook with DRM_MODE_DPMS_OFF.
616 * This callback is used by the legacy CRTC helpers. Atomic helpers
617 * also support using this hook for disabling an encoder to facilitate
618 * transitions to atomic, but it is deprecated. Instead @disable should
621 void (*prepare)(struct drm_encoder *encoder);
626 * This callback should commit the new mode on the encoder after a modeset,
627 * which in practice means the driver should enable the encoder. Most
628 * drivers ended up implementing this by calling their @dpms hook with
631 * This callback is used by the legacy CRTC helpers. Atomic helpers
632 * also support using this hook for enabling an encoder to facilitate
633 * transitions to atomic, but it is deprecated. Instead @enable should
636 void (*commit)(struct drm_encoder *encoder);
641 * This callback is used to update the display mode of an encoder.
643 * Note that the display pipe is completely off when this function is
644 * called. Drivers which need hardware to be running before they program
645 * the new display mode (because they implement runtime PM) should not
646 * use this hook, because the helper library calls it only once and not
647 * every time the display pipeline is suspend using either DPMS or the
648 * new "ACTIVE" property. Such drivers should instead move all their
649 * encoder setup into the @enable callback.
651 * This callback is used both by the legacy CRTC helpers and the atomic
652 * modeset helpers. It is optional in the atomic helpers.
656 * If the driver uses the atomic modeset helpers and needs to inspect
657 * the connector state or connector display info during mode setting,
658 * @atomic_mode_set can be used instead.
660 void (*mode_set)(struct drm_encoder *encoder,
661 struct drm_display_mode *mode,
662 struct drm_display_mode *adjusted_mode);
667 * This callback is used to update the display mode of an encoder.
669 * Note that the display pipe is completely off when this function is
670 * called. Drivers which need hardware to be running before they program
671 * the new display mode (because they implement runtime PM) should not
672 * use this hook, because the helper library calls it only once and not
673 * every time the display pipeline is suspended using either DPMS or the
674 * new "ACTIVE" property. Such drivers should instead move all their
675 * encoder setup into the @enable callback.
677 * This callback is used by the atomic modeset helpers in place of the
678 * @mode_set callback, if set by the driver. It is optional and should
679 * be used instead of @mode_set if the driver needs to inspect the
680 * connector state or display info, since there is no direct way to
681 * go from the encoder to the current connector.
683 void (*atomic_mode_set)(struct drm_encoder *encoder,
684 struct drm_crtc_state *crtc_state,
685 struct drm_connector_state *conn_state);
690 * This callback can be used by drivers who want to do detection on the
691 * encoder object instead of in connector functions.
693 * It is not used by any helper and therefore has purely driver-specific
694 * semantics. New drivers shouldn't use this and instead just implement
695 * their own private callbacks.
699 * This should just be converted into a pile of driver vfuncs.
700 * Currently radeon, amdgpu and nouveau are using it.
702 enum drm_connector_status (*detect)(struct drm_encoder *encoder,
703 struct drm_connector *connector);
708 * This callback should be used to disable the encoder. With the atomic
709 * drivers it is called before this encoder's CRTC has been shut off
710 * using their own &drm_crtc_helper_funcs.atomic_disable hook. If that
711 * sequence is too simple drivers can just add their own driver private
712 * encoder hooks and call them from CRTC's callback by looping over all
713 * encoders connected to it using for_each_encoder_on_crtc().
715 * This callback is a variant of @disable that provides the atomic state
716 * to the driver. If @atomic_disable is implemented, @disable is not
717 * called by the helpers.
719 * This hook is only used by atomic helpers. Atomic drivers don't need
720 * to implement it if there's no need to disable anything at the encoder
721 * level. To ensure that runtime PM handling (using either DPMS or the
722 * new "ACTIVE" property) works @atomic_disable must be the inverse of
725 void (*atomic_disable)(struct drm_encoder *encoder,
726 struct drm_atomic_state *state);
731 * This callback should be used to enable the encoder. It is called
732 * after this encoder's CRTC has been enabled using their own
733 * &drm_crtc_helper_funcs.atomic_enable hook. If that sequence is
734 * too simple drivers can just add their own driver private encoder
735 * hooks and call them from CRTC's callback by looping over all encoders
736 * connected to it using for_each_encoder_on_crtc().
738 * This callback is a variant of @enable that provides the atomic state
739 * to the driver. If @atomic_enable is implemented, @enable is not
740 * called by the helpers.
742 * This hook is only used by atomic helpers, it is the opposite of
743 * @atomic_disable. Atomic drivers don't need to implement it if there's
744 * no need to enable anything at the encoder level. To ensure that
745 * runtime PM handling works @atomic_enable must be the inverse of
748 void (*atomic_enable)(struct drm_encoder *encoder,
749 struct drm_atomic_state *state);
754 * This callback should be used to disable the encoder. With the atomic
755 * drivers it is called before this encoder's CRTC has been shut off
756 * using their own &drm_crtc_helper_funcs.disable hook. If that
757 * sequence is too simple drivers can just add their own driver private
758 * encoder hooks and call them from CRTC's callback by looping over all
759 * encoders connected to it using for_each_encoder_on_crtc().
761 * This hook is used both by legacy CRTC helpers and atomic helpers.
762 * Atomic drivers don't need to implement it if there's no need to
763 * disable anything at the encoder level. To ensure that runtime PM
764 * handling (using either DPMS or the new "ACTIVE" property) works
765 * @disable must be the inverse of @enable for atomic drivers.
767 * For atomic drivers also consider @atomic_disable and save yourself
768 * from having to read the NOTE below!
772 * With legacy CRTC helpers there's a big semantic difference between
773 * @disable and other hooks (like @prepare or @dpms) used to shut down a
774 * encoder: @disable is only called when also logically disabling the
775 * display pipeline and needs to release any resources acquired in
776 * @mode_set (like shared PLLs, or again release pinned framebuffers).
778 * Therefore @disable must be the inverse of @mode_set plus @commit for
779 * drivers still using legacy CRTC helpers, which is different from the
780 * rules under atomic.
782 void (*disable)(struct drm_encoder *encoder);
787 * This callback should be used to enable the encoder. With the atomic
788 * drivers it is called after this encoder's CRTC has been enabled using
789 * their own &drm_crtc_helper_funcs.enable hook. If that sequence is
790 * too simple drivers can just add their own driver private encoder
791 * hooks and call them from CRTC's callback by looping over all encoders
792 * connected to it using for_each_encoder_on_crtc().
794 * This hook is only used by atomic helpers, it is the opposite of
795 * @disable. Atomic drivers don't need to implement it if there's no
796 * need to enable anything at the encoder level. To ensure that
797 * runtime PM handling (using either DPMS or the new "ACTIVE" property)
798 * works @enable must be the inverse of @disable for atomic drivers.
800 void (*enable)(struct drm_encoder *encoder);
805 * This callback is used to validate encoder state for atomic drivers.
806 * Since the encoder is the object connecting the CRTC and connector it
807 * gets passed both states, to be able to validate interactions and
808 * update the CRTC to match what the encoder needs for the requested
811 * Since this provides a strict superset of the functionality of
812 * @mode_fixup (the requested and adjusted modes are both available
813 * through the passed in &struct drm_crtc_state) @mode_fixup is not
814 * called when @atomic_check is implemented.
816 * This function is used by the atomic helpers, but it is optional.
820 * This function is called in the check phase of an atomic update. The
821 * driver is not allowed to change anything outside of the free-standing
822 * state objects passed-in or assembled in the overall &drm_atomic_state
823 * update tracking structure.
825 * Also beware that userspace can request its own custom modes, neither
826 * core nor helpers filter modes to the list of probe modes reported by
827 * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure
828 * that modes are filtered consistently put any encoder constraints and
829 * limits checks into @mode_valid.
833 * 0 on success, -EINVAL if the state or the transition can't be
834 * supported, -ENOMEM on memory allocation failure and -EDEADLK if an
835 * attempt to obtain another state object ran into a &drm_modeset_lock
838 int (*atomic_check)(struct drm_encoder *encoder,
839 struct drm_crtc_state *crtc_state,
840 struct drm_connector_state *conn_state);
844 * drm_encoder_helper_add - sets the helper vtable for an encoder
845 * @encoder: DRM encoder
846 * @funcs: helper vtable to set for @encoder
848 static inline void drm_encoder_helper_add(struct drm_encoder *encoder,
849 const struct drm_encoder_helper_funcs *funcs)
851 encoder->helper_private = funcs;
855 * struct drm_connector_helper_funcs - helper operations for connectors
857 * These functions are used by the atomic and legacy modeset helpers and by the
860 struct drm_connector_helper_funcs {
864 * This function should fill in all modes currently valid for the sink
865 * into the &drm_connector.probed_modes list. It should also update the
866 * EDID property by calling drm_connector_update_edid_property().
868 * The usual way to implement this is to cache the EDID retrieved in the
869 * probe callback somewhere in the driver-private connector structure.
870 * In this function drivers then parse the modes in the EDID and add
871 * them by calling drm_add_edid_modes(). But connectors that drive a
872 * fixed panel can also manually add specific modes using
873 * drm_mode_probed_add(). Drivers which manually add modes should also
874 * make sure that the &drm_connector.display_info,
875 * &drm_connector.width_mm and &drm_connector.height_mm fields are
878 * Note that the caller function will automatically add standard VESA
879 * DMT modes up to 1024x768 if the .get_modes() helper operation returns
880 * no mode and if the connector status is connector_status_connected or
881 * connector_status_unknown. There is no need to call
882 * drm_add_modes_noedid() manually in that case.
884 * Virtual drivers that just want some standard VESA mode with a given
885 * resolution can call drm_add_modes_noedid(), and mark the preferred
886 * one using drm_set_preferred_mode().
888 * This function is only called after the @detect hook has indicated
889 * that a sink is connected and when the EDID isn't overridden through
890 * sysfs or the kernel commandline.
892 * This callback is used by the probe helpers in e.g.
893 * drm_helper_probe_single_connector_modes().
895 * To avoid races with concurrent connector state updates, the helper
896 * libraries always call this with the &drm_mode_config.connection_mutex
897 * held. Because of this it's safe to inspect &drm_connector->state.
901 * The number of modes added by calling drm_mode_probed_add().
903 int (*get_modes)(struct drm_connector *connector);
908 * Check to see if anything is attached to the connector. The parameter
909 * force is set to false whilst polling, true when checking the
910 * connector due to a user request. force can be used by the driver to
911 * avoid expensive, destructive operations during automated probing.
913 * This callback is optional, if not implemented the connector will be
914 * considered as always being attached.
916 * This is the atomic version of &drm_connector_funcs.detect.
918 * To avoid races against concurrent connector state updates, the
919 * helper libraries always call this with ctx set to a valid context,
920 * and &drm_mode_config.connection_mutex will always be locked with
921 * the ctx parameter set to this ctx. This allows taking additional
926 * &drm_connector_status indicating the connector's status,
927 * or the error code returned by drm_modeset_lock(), -EDEADLK.
929 int (*detect_ctx)(struct drm_connector *connector,
930 struct drm_modeset_acquire_ctx *ctx,
936 * Callback to validate a mode for a connector, irrespective of the
937 * specific display configuration.
939 * This callback is used by the probe helpers to filter the mode list
940 * (which is usually derived from the EDID data block from the sink).
941 * See e.g. drm_helper_probe_single_connector_modes().
943 * This function is optional.
947 * This only filters the mode list supplied to userspace in the
948 * GETCONNECTOR IOCTL. Compared to &drm_encoder_helper_funcs.mode_valid,
949 * &drm_crtc_helper_funcs.mode_valid and &drm_bridge_funcs.mode_valid,
950 * which are also called by the atomic helpers from
951 * drm_atomic_helper_check_modeset(). This allows userspace to force and
952 * ignore sink constraint (like the pixel clock limits in the screen's
953 * EDID), which is useful for e.g. testing, or working around a broken
954 * EDID. Any source hardware constraint (which always need to be
955 * enforced) therefore should be checked in one of the above callbacks,
956 * and not this one here.
958 * To avoid races with concurrent connector state updates, the helper
959 * libraries always call this with the &drm_mode_config.connection_mutex
960 * held. Because of this it's safe to inspect &drm_connector->state.
964 * Either &drm_mode_status.MODE_OK or one of the failure reasons in &enum
967 enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
968 struct drm_display_mode *mode);
973 * Callback to validate a mode for a connector, irrespective of the
974 * specific display configuration.
976 * This callback is used by the probe helpers to filter the mode list
977 * (which is usually derived from the EDID data block from the sink).
978 * See e.g. drm_helper_probe_single_connector_modes().
980 * This function is optional, and is the atomic version of
981 * &drm_connector_helper_funcs.mode_valid.
983 * To allow for accessing the atomic state of modesetting objects, the
984 * helper libraries always call this with ctx set to a valid context,
985 * and &drm_mode_config.connection_mutex will always be locked with
986 * the ctx parameter set to @ctx. This allows for taking additional
989 * Even though additional locks may be acquired, this callback is
990 * still expected not to take any constraints into account which would
991 * be influenced by the currently set display state - such constraints
992 * should be handled in the driver's atomic check. For example, if a
993 * connector shares display bandwidth with other connectors then it
994 * would be ok to validate the minimum bandwidth requirement of a mode
995 * against the maximum possible bandwidth of the connector. But it
996 * wouldn't be ok to take the current bandwidth usage of other
997 * connectors into account, as this would change depending on the
1001 * 0 if &drm_connector_helper_funcs.mode_valid_ctx succeeded and wrote
1002 * the &enum drm_mode_status value to @status, or a negative error
1006 int (*mode_valid_ctx)(struct drm_connector *connector,
1007 struct drm_display_mode *mode,
1008 struct drm_modeset_acquire_ctx *ctx,
1009 enum drm_mode_status *status);
1014 * This function should select the best encoder for the given connector.
1016 * This function is used by both the atomic helpers (in the
1017 * drm_atomic_helper_check_modeset() function) and in the legacy CRTC
1022 * In atomic drivers this function is called in the check phase of an
1023 * atomic update. The driver is not allowed to change or inspect
1024 * anything outside of arguments passed-in. Atomic drivers which need to
1025 * inspect dynamic configuration state should instead use
1026 * @atomic_best_encoder.
1028 * You can leave this function to NULL if the connector is only
1029 * attached to a single encoder. In this case, the core will call
1030 * drm_connector_get_single_encoder() for you.
1034 * Encoder that should be used for the given connector and connector
1035 * state, or NULL if no suitable encoder exists. Note that the helpers
1036 * will ensure that encoders aren't used twice, drivers should not check
1039 struct drm_encoder *(*best_encoder)(struct drm_connector *connector);
1042 * @atomic_best_encoder:
1044 * This is the atomic version of @best_encoder for atomic drivers which
1045 * need to select the best encoder depending upon the desired
1046 * configuration and can't select it statically.
1048 * This function is used by drm_atomic_helper_check_modeset().
1049 * If it is not implemented, the core will fallback to @best_encoder
1050 * (or drm_connector_get_single_encoder() if @best_encoder is NULL).
1054 * This function is called in the check phase of an atomic update. The
1055 * driver is not allowed to change anything outside of the
1056 * &drm_atomic_state update tracking structure passed in.
1060 * Encoder that should be used for the given connector and connector
1061 * state, or NULL if no suitable encoder exists. Note that the helpers
1062 * will ensure that encoders aren't used twice, drivers should not check
1065 struct drm_encoder *(*atomic_best_encoder)(struct drm_connector *connector,
1066 struct drm_atomic_state *state);
1071 * This hook is used to validate connector state. This function is
1072 * called from &drm_atomic_helper_check_modeset, and is called when
1073 * a connector property is set, or a modeset on the crtc is forced.
1075 * Because &drm_atomic_helper_check_modeset may be called multiple times,
1076 * this function should handle being called multiple times as well.
1078 * This function is also allowed to inspect any other object's state and
1079 * can add more state objects to the atomic commit if needed. Care must
1080 * be taken though to ensure that state check and compute functions for
1081 * these added states are all called, and derived state in other objects
1082 * all updated. Again the recommendation is to just call check helpers
1083 * until a maximal configuration is reached.
1087 * This function is called in the check phase of an atomic update. The
1088 * driver is not allowed to change anything outside of the free-standing
1089 * state objects passed-in or assembled in the overall &drm_atomic_state
1090 * update tracking structure.
1094 * 0 on success, -EINVAL if the state or the transition can't be
1095 * supported, -ENOMEM on memory allocation failure and -EDEADLK if an
1096 * attempt to obtain another state object ran into a &drm_modeset_lock
1099 int (*atomic_check)(struct drm_connector *connector,
1100 struct drm_atomic_state *state);
1105 * This hook is to be used by drivers implementing writeback connectors
1106 * that need a point when to commit the writeback job to the hardware.
1107 * The writeback_job to commit is available in the new connector state,
1108 * in &drm_connector_state.writeback_job.
1110 * This hook is optional.
1112 * This callback is used by the atomic modeset helpers.
1114 void (*atomic_commit)(struct drm_connector *connector,
1115 struct drm_atomic_state *state);
1118 * @prepare_writeback_job:
1120 * As writeback jobs contain a framebuffer, drivers may need to
1121 * prepare and clean them up the same way they can prepare and
1122 * clean up framebuffers for planes. This optional connector operation
1123 * is used to support the preparation of writeback jobs. The job
1124 * prepare operation is called from drm_atomic_helper_prepare_planes()
1125 * for struct &drm_writeback_connector connectors only.
1127 * This operation is optional.
1129 * This callback is used by the atomic modeset helpers.
1131 int (*prepare_writeback_job)(struct drm_writeback_connector *connector,
1132 struct drm_writeback_job *job);
1134 * @cleanup_writeback_job:
1136 * This optional connector operation is used to support the
1137 * cleanup of writeback jobs. The job cleanup operation is called
1138 * from the existing drm_writeback_cleanup_job() function, invoked
1139 * both when destroying the job as part of an aborted commit, or when
1140 * the job completes.
1142 * This operation is optional.
1144 * This callback is used by the atomic modeset helpers.
1146 void (*cleanup_writeback_job)(struct drm_writeback_connector *connector,
1147 struct drm_writeback_job *job);
1152 * Enable hot-plug detection for the connector.
1154 * This operation is optional.
1156 * This callback is used by the drm_kms_helper_poll_enable() helpers.
1158 void (*enable_hpd)(struct drm_connector *connector);
1163 * Disable hot-plug detection for the connector.
1165 * This operation is optional.
1167 * This callback is used by the drm_kms_helper_poll_disable() helpers.
1169 void (*disable_hpd)(struct drm_connector *connector);
1173 * drm_connector_helper_add - sets the helper vtable for a connector
1174 * @connector: DRM connector
1175 * @funcs: helper vtable to set for @connector
1177 static inline void drm_connector_helper_add(struct drm_connector *connector,
1178 const struct drm_connector_helper_funcs *funcs)
1180 connector->helper_private = funcs;
1184 * struct drm_plane_helper_funcs - helper operations for planes
1186 * These functions are used by the atomic helpers.
1188 struct drm_plane_helper_funcs {
1192 * This hook is to prepare a framebuffer for scanout by e.g. pinning
1193 * its backing storage or relocating it into a contiguous block of
1194 * VRAM. Other possible preparatory work includes flushing caches.
1196 * This function must not block for outstanding rendering, since it is
1197 * called in the context of the atomic IOCTL even for async commits to
1198 * be able to return any errors to userspace. Instead the recommended
1199 * way is to fill out the &drm_plane_state.fence of the passed-in
1200 * &drm_plane_state. If the driver doesn't support native fences then
1201 * equivalent functionality should be implemented through private
1202 * members in the plane structure.
1204 * For GEM drivers who neither have a @prepare_fb nor @cleanup_fb hook
1205 * set drm_gem_plane_helper_prepare_fb() is called automatically to
1206 * implement this. Other drivers which need additional plane processing
1207 * can call drm_gem_plane_helper_prepare_fb() from their @prepare_fb
1210 * The resources acquired in @prepare_fb persist after the end of
1211 * the atomic commit. Resources that can be release at the commit's end
1212 * should be acquired in @begin_fb_access and released in @end_fb_access.
1213 * For example, a GEM buffer's pin operation belongs into @prepare_fb to
1214 * keep the buffer pinned after the commit. But a vmap operation for
1215 * shadow-plane helpers belongs into @begin_fb_access, so that atomic
1216 * helpers remove the mapping at the end of the commit.
1218 * The helpers will call @cleanup_fb with matching arguments for every
1219 * successful call to this hook.
1221 * This callback is used by the atomic modeset helpers, but it is
1222 * optional. See @begin_fb_access for preparing per-commit resources.
1226 * 0 on success or one of the following negative error codes allowed by
1227 * the &drm_mode_config_funcs.atomic_commit vfunc. When using helpers
1228 * this callback is the only one which can fail an atomic commit,
1229 * everything else must complete successfully.
1231 int (*prepare_fb)(struct drm_plane *plane,
1232 struct drm_plane_state *new_state);
1236 * This hook is called to clean up any resources allocated for the given
1237 * framebuffer and plane configuration in @prepare_fb.
1239 * This callback is used by the atomic modeset helpers, but it is
1242 void (*cleanup_fb)(struct drm_plane *plane,
1243 struct drm_plane_state *old_state);
1248 * This hook prepares the plane for access during an atomic commit.
1249 * In contrast to @prepare_fb, resources acquired in @begin_fb_access,
1250 * are released at the end of the atomic commit in @end_fb_access.
1252 * For example, with shadow-plane helpers, the GEM buffer's vmap
1253 * operation belongs into @begin_fb_access, so that the buffer's
1254 * memory will be unmapped at the end of the commit in @end_fb_access.
1255 * But a GEM buffer's pin operation belongs into @prepare_fb
1256 * to keep the buffer pinned after the commit.
1258 * The callback is used by the atomic modeset helpers, but it is optional.
1259 * See @end_fb_cleanup for undoing the effects of @begin_fb_access and
1260 * @prepare_fb for acquiring resources until the next pageflip.
1263 * 0 on success, or a negative errno code otherwise.
1265 int (*begin_fb_access)(struct drm_plane *plane, struct drm_plane_state *new_plane_state);
1270 * This hook cleans up resources allocated by @begin_fb_access. It it called
1271 * at the end of a commit for the new plane state.
1273 void (*end_fb_access)(struct drm_plane *plane, struct drm_plane_state *new_plane_state);
1278 * Drivers should check plane specific constraints in this hook.
1280 * When using drm_atomic_helper_check_planes() plane's @atomic_check
1281 * hooks are called before the ones for CRTCs, which allows drivers to
1282 * request shared resources that the CRTC controls here. For more
1283 * complicated dependencies the driver can call the provided check helpers
1284 * multiple times until the computed state has a final configuration and
1285 * everything has been checked.
1287 * This function is also allowed to inspect any other object's state and
1288 * can add more state objects to the atomic commit if needed. Care must
1289 * be taken though to ensure that state check and compute functions for
1290 * these added states are all called, and derived state in other objects
1291 * all updated. Again the recommendation is to just call check helpers
1292 * until a maximal configuration is reached.
1294 * This callback is used by the atomic modeset helpers, but it is
1299 * This function is called in the check phase of an atomic update. The
1300 * driver is not allowed to change anything outside of the
1301 * &drm_atomic_state update tracking structure.
1305 * 0 on success, -EINVAL if the state or the transition can't be
1306 * supported, -ENOMEM on memory allocation failure and -EDEADLK if an
1307 * attempt to obtain another state object ran into a &drm_modeset_lock
1310 int (*atomic_check)(struct drm_plane *plane,
1311 struct drm_atomic_state *state);
1316 * Drivers should use this function to update the plane state. This
1317 * hook is called in-between the &drm_crtc_helper_funcs.atomic_begin and
1318 * drm_crtc_helper_funcs.atomic_flush callbacks.
1320 * Note that the power state of the display pipe when this function is
1321 * called depends upon the exact helpers and calling sequence the driver
1322 * has picked. See drm_atomic_helper_commit_planes() for a discussion of
1323 * the tradeoffs and variants of plane commit helpers.
1325 * This callback is used by the atomic modeset helpers, but it is optional.
1327 void (*atomic_update)(struct drm_plane *plane,
1328 struct drm_atomic_state *state);
1333 * Drivers should use this function to unconditionally enable a plane.
1334 * This hook is called in-between the &drm_crtc_helper_funcs.atomic_begin
1335 * and drm_crtc_helper_funcs.atomic_flush callbacks. It is called after
1336 * @atomic_update, which will be called for all enabled planes. Drivers
1337 * that use @atomic_enable should set up a plane in @atomic_update and
1338 * afterwards enable the plane in @atomic_enable. If a plane needs to be
1339 * enabled before installing the scanout buffer, drivers can still do
1340 * so in @atomic_update.
1342 * Note that the power state of the display pipe when this function is
1343 * called depends upon the exact helpers and calling sequence the driver
1344 * has picked. See drm_atomic_helper_commit_planes() for a discussion of
1345 * the tradeoffs and variants of plane commit helpers.
1347 * This callback is used by the atomic modeset helpers, but it is
1348 * optional. If implemented, @atomic_enable should be the inverse of
1349 * @atomic_disable. Drivers that don't want to use either can still
1350 * implement the complete plane update in @atomic_update.
1352 void (*atomic_enable)(struct drm_plane *plane,
1353 struct drm_atomic_state *state);
1358 * Drivers should use this function to unconditionally disable a plane.
1359 * This hook is called in-between the
1360 * &drm_crtc_helper_funcs.atomic_begin and
1361 * drm_crtc_helper_funcs.atomic_flush callbacks. It is an alternative to
1362 * @atomic_update, which will be called for disabling planes, too, if
1363 * the @atomic_disable hook isn't implemented.
1365 * This hook is also useful to disable planes in preparation of a modeset,
1366 * by calling drm_atomic_helper_disable_planes_on_crtc() from the
1367 * &drm_crtc_helper_funcs.disable hook.
1369 * Note that the power state of the display pipe when this function is
1370 * called depends upon the exact helpers and calling sequence the driver
1371 * has picked. See drm_atomic_helper_commit_planes() for a discussion of
1372 * the tradeoffs and variants of plane commit helpers.
1374 * This callback is used by the atomic modeset helpers, but it is
1375 * optional. It's intended to reverse the effects of @atomic_enable.
1377 void (*atomic_disable)(struct drm_plane *plane,
1378 struct drm_atomic_state *state);
1381 * @atomic_async_check:
1383 * Drivers should set this function pointer to check if the plane's
1384 * atomic state can be updated in a async fashion. Here async means
1385 * "not vblank synchronized".
1387 * This hook is called by drm_atomic_async_check() to establish if a
1388 * given update can be committed asynchronously, that is, if it can
1389 * jump ahead of the state currently queued for update.
1393 * Return 0 on success and any error returned indicates that the update
1394 * can not be applied in asynchronous manner.
1396 int (*atomic_async_check)(struct drm_plane *plane,
1397 struct drm_atomic_state *state);
1400 * @atomic_async_update:
1402 * Drivers should set this function pointer to perform asynchronous
1403 * updates of planes, that is, jump ahead of the currently queued
1404 * state and update the plane. Here async means "not vblank
1407 * This hook is called by drm_atomic_helper_async_commit().
1409 * An async update will happen on legacy cursor updates. An async
1410 * update won't happen if there is an outstanding commit modifying
1413 * When doing async_update drivers shouldn't replace the
1414 * &drm_plane_state but update the current one with the new plane
1415 * configurations in the new plane_state.
1417 * Drivers should also swap the framebuffers between current plane
1418 * state (&drm_plane.state) and new_state.
1419 * This is required since cleanup for async commits is performed on
1420 * the new state, rather than old state like for traditional commits.
1421 * Since we want to give up the reference on the current (old) fb
1422 * instead of our brand new one, swap them in the driver during the
1426 * - It only works for single plane updates
1427 * - Async Pageflips are not supported yet
1428 * - Some hw might still scan out the old buffer until the next
1429 * vblank, however we let go of the fb references as soon as
1430 * we run this hook. For now drivers must implement their own workers
1431 * for deferring if needed, until a common solution is created.
1433 void (*atomic_async_update)(struct drm_plane *plane,
1434 struct drm_atomic_state *state);
1438 * drm_plane_helper_add - sets the helper vtable for a plane
1440 * @funcs: helper vtable to set for @plane
1442 static inline void drm_plane_helper_add(struct drm_plane *plane,
1443 const struct drm_plane_helper_funcs *funcs)
1445 plane->helper_private = funcs;
1449 * struct drm_mode_config_helper_funcs - global modeset helper operations
1451 * These helper functions are used by the atomic helpers.
1453 struct drm_mode_config_helper_funcs {
1455 * @atomic_commit_tail:
1457 * This hook is used by the default atomic_commit() hook implemented in
1458 * drm_atomic_helper_commit() together with the nonblocking commit
1459 * helpers (see drm_atomic_helper_setup_commit() for a starting point)
1460 * to implement blocking and nonblocking commits easily. It is not used
1461 * by the atomic helpers
1463 * This function is called when the new atomic state has already been
1464 * swapped into the various state pointers. The passed in state
1465 * therefore contains copies of the old/previous state. This hook should
1466 * commit the new state into hardware. Note that the helpers have
1467 * already waited for preceeding atomic commits and fences, but drivers
1468 * can add more waiting calls at the start of their implementation, e.g.
1469 * to wait for driver-internal request for implicit syncing, before
1470 * starting to commit the update to the hardware.
1472 * After the atomic update is committed to the hardware this hook needs
1473 * to call drm_atomic_helper_commit_hw_done(). Then wait for the update
1474 * to be executed by the hardware, for example using
1475 * drm_atomic_helper_wait_for_vblanks() or
1476 * drm_atomic_helper_wait_for_flip_done(), and then clean up the old
1477 * framebuffers using drm_atomic_helper_cleanup_planes().
1479 * When disabling a CRTC this hook _must_ stall for the commit to
1480 * complete. Vblank waits don't work on disabled CRTC, hence the core
1481 * can't take care of this. And it also can't rely on the vblank event,
1482 * since that can be signalled already when the screen shows black,
1483 * which can happen much earlier than the last hardware access needed to
1484 * shut off the display pipeline completely.
1486 * This hook is optional, the default implementation is
1487 * drm_atomic_helper_commit_tail().
1489 void (*atomic_commit_tail)(struct drm_atomic_state *state);
1492 * @atomic_commit_setup:
1494 * This hook is used by the default atomic_commit() hook implemented in
1495 * drm_atomic_helper_commit() together with the nonblocking helpers (see
1496 * drm_atomic_helper_setup_commit()) to extend the DRM commit setup. It
1497 * is not used by the atomic helpers.
1499 * This function is called at the end of
1500 * drm_atomic_helper_setup_commit(), so once the commit has been
1501 * properly setup across the generic DRM object states. It allows
1502 * drivers to do some additional commit tracking that isn't related to a
1503 * CRTC, plane or connector, tracked in a &drm_private_obj structure.
1505 * Note that the documentation of &drm_private_obj has more details on
1506 * how one should implement this.
1508 * This hook is optional.
1510 int (*atomic_commit_setup)(struct drm_atomic_state *state);