Merge remote-tracking branch 'stable/linux-5.15.y' into rpi-5.15.y
[platform/kernel/linux-rpi.git] / include / drm / drm_mipi_dsi.h
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * MIPI DSI Bus
4  *
5  * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
6  * Andrzej Hajda <a.hajda@samsung.com>
7  */
8
9 #ifndef __DRM_MIPI_DSI_H__
10 #define __DRM_MIPI_DSI_H__
11
12 #include <linux/device.h>
13
14 struct mipi_dsi_host;
15 struct mipi_dsi_device;
16 struct drm_dsc_picture_parameter_set;
17
18 /* request ACK from peripheral */
19 #define MIPI_DSI_MSG_REQ_ACK    BIT(0)
20 /* use Low Power Mode to transmit message */
21 #define MIPI_DSI_MSG_USE_LPM    BIT(1)
22
23 /**
24  * struct mipi_dsi_msg - read/write DSI buffer
25  * @channel: virtual channel id
26  * @type: payload data type
27  * @flags: flags controlling this message transmission
28  * @tx_len: length of @tx_buf
29  * @tx_buf: data to be written
30  * @rx_len: length of @rx_buf
31  * @rx_buf: data to be read, or NULL
32  */
33 struct mipi_dsi_msg {
34         u8 channel;
35         u8 type;
36         u16 flags;
37
38         size_t tx_len;
39         const void *tx_buf;
40
41         size_t rx_len;
42         void *rx_buf;
43 };
44
45 bool mipi_dsi_packet_format_is_short(u8 type);
46 bool mipi_dsi_packet_format_is_long(u8 type);
47
48 /**
49  * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
50  * @size: size (in bytes) of the packet
51  * @header: the four bytes that make up the header (Data ID, Word Count or
52  *     Packet Data, and ECC)
53  * @payload_length: number of bytes in the payload
54  * @payload: a pointer to a buffer containing the payload, if any
55  */
56 struct mipi_dsi_packet {
57         size_t size;
58         u8 header[4];
59         size_t payload_length;
60         const u8 *payload;
61 };
62
63 int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
64                            const struct mipi_dsi_msg *msg);
65
66 /**
67  * struct mipi_dsi_host_ops - DSI bus operations
68  * @attach: attach DSI device to DSI host
69  * @detach: detach DSI device from DSI host
70  * @transfer: transmit a DSI packet
71  *
72  * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
73  * structures. This structure contains information about the type of packet
74  * being transmitted as well as the transmit and receive buffers. When an
75  * error is encountered during transmission, this function will return a
76  * negative error code. On success it shall return the number of bytes
77  * transmitted for write packets or the number of bytes received for read
78  * packets.
79  *
80  * Note that typically DSI packet transmission is atomic, so the .transfer()
81  * function will seldomly return anything other than the number of bytes
82  * contained in the transmit buffer on success.
83  *
84  * Also note that those callbacks can be called no matter the state the
85  * host is in. Drivers that need the underlying device to be powered to
86  * perform these operations will first need to make sure it's been
87  * properly enabled.
88  */
89 struct mipi_dsi_host_ops {
90         int (*attach)(struct mipi_dsi_host *host,
91                       struct mipi_dsi_device *dsi);
92         int (*detach)(struct mipi_dsi_host *host,
93                       struct mipi_dsi_device *dsi);
94         ssize_t (*transfer)(struct mipi_dsi_host *host,
95                             const struct mipi_dsi_msg *msg);
96 };
97
98 /**
99  * struct mipi_dsi_host - DSI host device
100  * @dev: driver model device node for this DSI host
101  * @ops: DSI host operations
102  * @list: list management
103  */
104 struct mipi_dsi_host {
105         struct device *dev;
106         const struct mipi_dsi_host_ops *ops;
107         struct list_head list;
108 };
109
110 int mipi_dsi_host_register(struct mipi_dsi_host *host);
111 void mipi_dsi_host_unregister(struct mipi_dsi_host *host);
112 struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node);
113
114 /* DSI mode flags */
115
116 /* Video mode display.
117  * Not set denotes a command mode display.
118  */
119 #define MIPI_DSI_MODE_VIDEO             BIT(0)
120 /* Video burst mode.
121  * Link frequency to be configured via platform configuration.
122  * This should always be set in conjunction with MIPI_DSI_MODE_VIDEO.
123  * (DSI spec V1.1 8.11.4)
124  */
125 #define MIPI_DSI_MODE_VIDEO_BURST       BIT(1)
126 /* Video pulse mode.
127  * Not set denotes sync event mode. (DSI spec V1.1 8.11.2)
128  */
129 #define MIPI_DSI_MODE_VIDEO_SYNC_PULSE  BIT(2)
130 /* Enable auto vertical count mode */
131 #define MIPI_DSI_MODE_VIDEO_AUTO_VERT   BIT(3)
132 /* Enable hsync-end packets in vsync-pulse and v-porch area */
133 #define MIPI_DSI_MODE_VIDEO_HSE         BIT(4)
134 /* Transmit NULL packets or LP mode during hfront-porch area.
135  * Not set denotes sending a blanking packet instead. (DSI spec V1.1 8.11.1)
136  */
137 #define MIPI_DSI_MODE_VIDEO_NO_HFP      BIT(5)
138 /* Transmit NULL packets or LP mode during hback-porch area.
139  * Not set denotes sending a blanking packet instead. (DSI spec V1.1 8.11.1)
140  */
141 #define MIPI_DSI_MODE_VIDEO_NO_HBP      BIT(6)
142 /* Transmit NULL packets or LP mode during hsync-active area.
143  * Not set denotes sending a blanking packet instead. (DSI spec V1.1 8.11.1)
144  */
145 #define MIPI_DSI_MODE_VIDEO_NO_HSA      BIT(7)
146 /* Flush display FIFO on vsync pulse */
147 #define MIPI_DSI_MODE_VSYNC_FLUSH       BIT(8)
148 /* Disable EoT packets in HS mode. (DSI spec V1.1 8.1)  */
149 #define MIPI_DSI_MODE_NO_EOT_PACKET     BIT(9)
150 /* Device supports non-continuous clock behavior (DSI spec V1.1 5.6.1) */
151 #define MIPI_DSI_CLOCK_NON_CONTINUOUS   BIT(10)
152 /* Transmit data in low power */
153 #define MIPI_DSI_MODE_LPM               BIT(11)
154
155 enum mipi_dsi_pixel_format {
156         MIPI_DSI_FMT_RGB888,
157         MIPI_DSI_FMT_RGB666,
158         MIPI_DSI_FMT_RGB666_PACKED,
159         MIPI_DSI_FMT_RGB565,
160 };
161
162 #define DSI_DEV_NAME_SIZE               20
163
164 /**
165  * struct mipi_dsi_device_info - template for creating a mipi_dsi_device
166  * @type: DSI peripheral chip type
167  * @channel: DSI virtual channel assigned to peripheral
168  * @node: pointer to OF device node or NULL
169  *
170  * This is populated and passed to mipi_dsi_device_new to create a new
171  * DSI device
172  */
173 struct mipi_dsi_device_info {
174         char type[DSI_DEV_NAME_SIZE];
175         u32 channel;
176         struct device_node *node;
177 };
178
179 /**
180  * struct mipi_dsi_device - DSI peripheral device
181  * @host: DSI host for this peripheral
182  * @dev: driver model device node for this peripheral
183  * @name: DSI peripheral chip type
184  * @channel: virtual channel assigned to the peripheral
185  * @format: pixel format for video mode
186  * @lanes: number of active data lanes
187  * @mode_flags: DSI operation mode related flags
188  * @hs_rate: maximum lane frequency for high speed mode in hertz, this should
189  * be set to the real limits of the hardware, zero is only accepted for
190  * legacy drivers
191  * @lp_rate: maximum lane frequency for low power mode in hertz, this should
192  * be set to the real limits of the hardware, zero is only accepted for
193  * legacy drivers
194  */
195 struct mipi_dsi_device {
196         struct mipi_dsi_host *host;
197         struct device dev;
198
199         char name[DSI_DEV_NAME_SIZE];
200         unsigned int channel;
201         unsigned int lanes;
202         enum mipi_dsi_pixel_format format;
203         unsigned long mode_flags;
204         unsigned long hs_rate;
205         unsigned long lp_rate;
206 };
207
208 #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:"
209
210 static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev)
211 {
212         return container_of(dev, struct mipi_dsi_device, dev);
213 }
214
215 /**
216  * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any
217  *                                given pixel format defined by the MIPI DSI
218  *                                specification
219  * @fmt: MIPI DSI pixel format
220  *
221  * Returns: The number of bits per pixel of the given pixel format.
222  */
223 static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
224 {
225         switch (fmt) {
226         case MIPI_DSI_FMT_RGB888:
227         case MIPI_DSI_FMT_RGB666:
228                 return 24;
229
230         case MIPI_DSI_FMT_RGB666_PACKED:
231                 return 18;
232
233         case MIPI_DSI_FMT_RGB565:
234                 return 16;
235         }
236
237         return -EINVAL;
238 }
239
240 struct mipi_dsi_device *
241 mipi_dsi_device_register_full(struct mipi_dsi_host *host,
242                               const struct mipi_dsi_device_info *info);
243 void mipi_dsi_device_unregister(struct mipi_dsi_device *dsi);
244 struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
245 int mipi_dsi_attach(struct mipi_dsi_device *dsi);
246 int mipi_dsi_detach(struct mipi_dsi_device *dsi);
247 int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi);
248 int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi);
249 int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
250                                             u16 value);
251 ssize_t mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable);
252 ssize_t mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi,
253                                        const struct drm_dsc_picture_parameter_set *pps);
254
255 ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
256                                size_t size);
257 ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
258                               size_t num_params, void *data, size_t size);
259
260 /**
261  * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
262  * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
263  *    information only
264  * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
265  *    V-Blanking and H-Blanking information
266  */
267 enum mipi_dsi_dcs_tear_mode {
268         MIPI_DSI_DCS_TEAR_MODE_VBLANK,
269         MIPI_DSI_DCS_TEAR_MODE_VHBLANK,
270 };
271
272 #define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2)
273 #define MIPI_DSI_DCS_POWER_MODE_NORMAL  (1 << 3)
274 #define MIPI_DSI_DCS_POWER_MODE_SLEEP   (1 << 4)
275 #define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5)
276 #define MIPI_DSI_DCS_POWER_MODE_IDLE    (1 << 6)
277
278 ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
279                                   const void *data, size_t len);
280 ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
281                            const void *data, size_t len);
282 ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
283                           size_t len);
284 int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi);
285 int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi);
286 int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode);
287 int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format);
288 int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
289 int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
290 int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
291 int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
292 int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
293                                     u16 end);
294 int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
295                                   u16 end);
296 int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
297 int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
298                              enum mipi_dsi_dcs_tear_mode mode);
299 int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
300 int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline);
301 int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
302                                         u16 brightness);
303 int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
304                                         u16 *brightness);
305
306 /**
307  * struct mipi_dsi_driver - DSI driver
308  * @driver: device driver model driver
309  * @probe: callback for device binding
310  * @remove: callback for device unbinding
311  * @shutdown: called at shutdown time to quiesce the device
312  */
313 struct mipi_dsi_driver {
314         struct device_driver driver;
315         int(*probe)(struct mipi_dsi_device *dsi);
316         int(*remove)(struct mipi_dsi_device *dsi);
317         void (*shutdown)(struct mipi_dsi_device *dsi);
318 };
319
320 static inline struct mipi_dsi_driver *
321 to_mipi_dsi_driver(struct device_driver *driver)
322 {
323         return container_of(driver, struct mipi_dsi_driver, driver);
324 }
325
326 static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi)
327 {
328         return dev_get_drvdata(&dsi->dev);
329 }
330
331 static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data)
332 {
333         dev_set_drvdata(&dsi->dev, data);
334 }
335
336 int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver,
337                                   struct module *owner);
338 void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver);
339
340 #define mipi_dsi_driver_register(driver) \
341         mipi_dsi_driver_register_full(driver, THIS_MODULE)
342
343 #define module_mipi_dsi_driver(__mipi_dsi_driver) \
344         module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \
345                         mipi_dsi_driver_unregister)
346
347 #endif /* __DRM_MIPI_DSI__ */