1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * dfu.h - DFU flashable area description
5 * Copyright (C) 2012 Samsung Electronics
6 * authors: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
7 * Lukasz Majewski <l.majewski@samsung.com>
10 #ifndef __DFU_ENTITY_H_
11 #define __DFU_ENTITY_H_
14 #include <linux/list.h>
16 #include <spi_flash.h>
17 #include <linux/usb/composite.h>
19 enum dfu_device_type {
46 struct mmc_internal_data {
50 unsigned int lba_start;
51 unsigned int lba_size;
52 unsigned int lba_blk_size;
54 /* eMMC HW partition access */
62 struct mtd_internal_data {
63 struct mtd_info *info;
68 /* for ubi partition */
72 struct nand_internal_data {
79 /* for nand/ubi use */
83 struct ram_internal_data {
88 struct sf_internal_data {
89 struct spi_flash *dev;
98 struct virt_internal_data {
102 #define DFU_NAME_SIZE 32
103 #ifndef DFU_DEFAULT_POLL_TIMEOUT
104 #define DFU_DEFAULT_POLL_TIMEOUT 0
106 #ifndef DFU_MANIFEST_POLL_TIMEOUT
107 #define DFU_MANIFEST_POLL_TIMEOUT DFU_DEFAULT_POLL_TIMEOUT
111 char name[DFU_NAME_SIZE];
114 enum dfu_device_type dev_type;
115 enum dfu_layout layout;
116 unsigned long max_buf_size;
119 struct mmc_internal_data mmc;
120 struct mtd_internal_data mtd;
121 struct nand_internal_data nand;
122 struct ram_internal_data ram;
123 struct sf_internal_data sf;
124 struct virt_internal_data virt;
127 int (*get_medium_size)(struct dfu_entity *dfu, u64 *size);
129 int (*read_medium)(struct dfu_entity *dfu,
130 u64 offset, void *buf, long *len);
132 int (*write_medium)(struct dfu_entity *dfu,
133 u64 offset, void *buf, long *len);
135 int (*flush_medium)(struct dfu_entity *dfu);
136 unsigned int (*poll_timeout)(struct dfu_entity *dfu);
138 void (*free_entity)(struct dfu_entity *dfu);
140 struct list_head list;
142 /* on the fly state */
152 u32 bad_skip; /* for nand use */
154 unsigned int inited:1;
158 extern struct list_head dfu_list;
160 #ifdef CONFIG_SET_DFU_ALT_INFO
162 * set_dfu_alt_info() - set dfu_alt_info environment variable
164 * If CONFIG_SET_DFU_ALT_INFO=y, this board specific function is called to set
165 * environment variable dfu_alt_info.
167 * @interface: dfu interface, e.g. "mmc" or "nand"
168 * @devstr: device number as string
170 void set_dfu_alt_info(char *interface, char *devstr);
174 * dfu_alt_init() - initialize buffer for dfu entities
176 * @num: number of entities
177 * @dfu: on return allocated buffer
178 * Return: 0 on success
180 int dfu_alt_init(int num, struct dfu_entity **dfu);
183 * dfu_alt_add() - add alternate to dfu entity buffer
186 * @interface: dfu interface, e.g. "mmc" or "nand"
187 * @devstr: device number as string
188 * @s: string description of alternate
189 * Return: 0 on success
191 int dfu_alt_add(struct dfu_entity *dfu, char *interface, char *devstr, char *s);
194 * dfu_config_entities() - initialize dfu entitities from envirionment
196 * Initialize the list of dfu entities from environment variable dfu_alt_info.
197 * The list must be freed by calling dfu_free_entities(). This function bypasses
198 * set_dfu_alt_info(). So typically you should use dfu_init_env_entities()
201 * See function :c:func:`dfu_free_entities`
202 * See function :c:func:`dfu_init_env_entities`
204 * @s: string with alternates
205 * @interface: interface, e.g. "mmc" or "nand"
206 * @devstr: device number as string
207 * Return: 0 on success, a negative error code otherwise
209 int dfu_config_entities(char *s, char *interface, char *devstr);
212 * dfu_free_entities() - free the list of dfu entities
214 * Free the internal list of dfu entities.
216 * See function :c:func:`dfu_init_env_entities`
218 void dfu_free_entities(void);
221 * dfu_show_entities() - print DFU alt settings list
223 void dfu_show_entities(void);
226 * dfu_get_alt_number() - get number of alternates
228 * Return: number of alternates in the dfu entities list
230 int dfu_get_alt_number(void);
233 * dfu_get_dev_type() - get string representation for dfu device type
236 * Return: string representation for device type
238 const char *dfu_get_dev_type(enum dfu_device_type type);
241 * dfu_get_layout() - get string describing layout
243 * Internally layouts are represented by enum dfu_device_type values. This
244 * function translates an enum value to a human readable string, e.g. DFU_FS_FAT
245 * is translated to "FAT".
248 * Result: string representation for the layout
250 const char *dfu_get_layout(enum dfu_layout layout);
253 * dfu_get_entity() - get dfu entity for an alternate id
258 struct dfu_entity *dfu_get_entity(int alt);
260 char *dfu_extract_token(char** e, int *n);
263 * dfu_get_alt() - get alternate id for filename
265 * Environment variable dfu_alt_info defines the write destinations (alternates)
266 * for different filenames. This function get the index of the alternate for
267 * a filename. If an absolute filename is provided (starting with '/'), the
268 * directory path is ignored.
271 * Return: id of the alternate or negative error number (-ENODEV)
273 int dfu_get_alt(char *name);
276 * dfu_init_env_entities() - initialize dfu entitities from envirionment
278 * Initialize the list of dfu entities from environment variable dfu_alt_info.
279 * The list must be freed by calling dfu_free_entities().
280 * @interface and @devstr are used to select the relevant set of alternates
281 * from environment variable dfu_alt_info.
283 * If environment variable dfu_alt_info specifies the interface and the device,
284 * use NULL for @interface and @devstr.
286 * See function :c:func:`dfu_free_entities`
288 * @interface: interface, e.g. "mmc" or "nand"
289 * @devstr: device number as string
290 * Return: 0 on success, a negative error code otherwise
292 int dfu_init_env_entities(char *interface, char *devstr);
294 unsigned char *dfu_get_buf(struct dfu_entity *dfu);
295 unsigned char *dfu_free_buf(void);
296 unsigned long dfu_get_buf_size(void);
297 bool dfu_usb_get_reset(void);
299 #ifdef CONFIG_DFU_TIMEOUT
300 unsigned long dfu_get_timeout(void);
301 void dfu_set_timeout(unsigned long);
305 * dfu_read() - read from dfu entity
307 * The block sequence number @blk_seq_num is a 16 bit counter that must be
308 * incremented with each call for the same dfu entity @de.
312 * @size: size of buffer
313 * @blk_seq_num: block sequence number
314 * Return: 0 for success, -1 for error
316 int dfu_read(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
319 * dfu_write() - write to dfu entity
321 * Write the contents of a buffer @buf to the dfu entity @de. After writing
322 * the last block call dfu_flush(). If a file is already loaded completely
323 * into memory it is preferable to use dfu_write_from_mem_addr() which takes
324 * care of blockwise transfer and flushing.
326 * The block sequence number @blk_seq_num is a 16 bit counter that must be
327 * incremented with each call for the same dfu entity @de.
329 * See function :c:func:`dfu_flush`
330 * See function :c:func:`dfu_write_from_mem_addr`
334 * @size: size of buffer
335 * @blk_seq_num: block sequence number
336 * Return: 0 for success, -1 for error
338 int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
341 * dfu_flush() - flush to dfu entity
343 * This function has to be called after writing the last block to the dfu
346 * The block sequence number @blk_seq_num is a 16 bit counter that must be
347 * incremented with each call for the same dfu entity @de.
349 * See function :c:func:`dfu_write`
354 * @blk_seq_num: block sequence number of last write - ignored
355 * Return: 0 for success, -1 for error
357 int dfu_flush(struct dfu_entity *de, void *buf, int size, int blk_seq_num);
360 * dfu_initiated_callback() - weak callback called on DFU transaction start
362 * It is a callback function called by DFU stack when a DFU transaction is
363 * initiated. This function allows to manage some board specific behavior on
366 * @dfu: pointer to the dfu_entity, which should be initialized
368 void dfu_initiated_callback(struct dfu_entity *dfu);
371 * dfu_flush_callback() - weak callback called at the end of the DFU write
373 * It is a callback function called by DFU stack after DFU manifestation.
374 * This function allows to manage some board specific behavior on DFU targets
376 * @dfu: pointer to the dfu_entity, which should be flushed
378 void dfu_flush_callback(struct dfu_entity *dfu);
381 * dfu_error_callback() - weak callback called at the DFU write error
383 * It is a callback function called by DFU stack after DFU write error.
384 * This function allows to manage some board specific behavior on DFU targets
386 * @dfu: pointer to the dfu_entity which cause the error
387 * @msg: the message of the error
389 void dfu_error_callback(struct dfu_entity *dfu, const char *msg);
391 int dfu_transaction_initiate(struct dfu_entity *dfu, bool read);
392 void dfu_transaction_cleanup(struct dfu_entity *dfu);
395 * dfu_defer_flush - pointer to store dfu_entity for deferred flashing.
396 * It should be NULL when not used.
398 extern struct dfu_entity *dfu_defer_flush;
401 * dfu_get_defer_flush() - get current value of dfu_defer_flush pointer
403 * Return: value of the dfu_defer_flush pointer
405 static inline struct dfu_entity *dfu_get_defer_flush(void)
407 return dfu_defer_flush;
411 * dfu_set_defer_flush() - set the dfu_defer_flush pointer
413 * @dfu: pointer to the dfu_entity, which should be written
415 static inline void dfu_set_defer_flush(struct dfu_entity *dfu)
417 dfu_defer_flush = dfu;
421 * dfu_write_from_mem_addr() - write data from memory to DFU managed medium
423 * This function adds support for writing data starting from fixed memory
424 * address (like $loadaddr) to dfu managed medium (e.g. NAND, MMC, file system)
426 * @dfu: dfu entity to which we want to store data
427 * @buf: fixed memory address from where data starts
428 * @size: number of bytes to write
430 * Return: 0 on success, other value on failure
432 int dfu_write_from_mem_addr(struct dfu_entity *dfu, void *buf, int size);
434 /* Device specific */
435 #if CONFIG_IS_ENABLED(DFU_MMC)
436 extern int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s);
438 static inline int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr,
441 puts("MMC support not available!\n");
446 #if CONFIG_IS_ENABLED(DFU_NAND)
447 extern int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s);
449 static inline int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr,
452 puts("NAND support not available!\n");
457 #if CONFIG_IS_ENABLED(DFU_RAM)
458 extern int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr, char *s);
460 static inline int dfu_fill_entity_ram(struct dfu_entity *dfu, char *devstr,
463 puts("RAM support not available!\n");
468 #if CONFIG_IS_ENABLED(DFU_SF)
469 extern int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr, char *s);
471 static inline int dfu_fill_entity_sf(struct dfu_entity *dfu, char *devstr,
474 puts("SF support not available!\n");
479 #if CONFIG_IS_ENABLED(DFU_MTD)
480 int dfu_fill_entity_mtd(struct dfu_entity *dfu, char *devstr, char *s);
482 static inline int dfu_fill_entity_mtd(struct dfu_entity *dfu, char *devstr,
485 puts("MTD support not available!\n");
490 #ifdef CONFIG_DFU_VIRT
491 int dfu_fill_entity_virt(struct dfu_entity *dfu, char *devstr, char *s);
492 int dfu_write_medium_virt(struct dfu_entity *dfu, u64 offset,
493 void *buf, long *len);
494 int dfu_get_medium_size_virt(struct dfu_entity *dfu, u64 *size);
495 int dfu_read_medium_virt(struct dfu_entity *dfu, u64 offset,
496 void *buf, long *len);
498 static inline int dfu_fill_entity_virt(struct dfu_entity *dfu, char *devstr,
501 puts("VIRT support not available!\n");
506 extern bool dfu_reinit_needed;
508 #if CONFIG_IS_ENABLED(DFU_WRITE_ALT)
510 * dfu_write_by_name() - write data to DFU medium
511 * @dfu_entity_name: Name of DFU entity to write
512 * @addr: Address of data buffer to write
513 * @len: Number of bytes
514 * @interface: Destination DFU medium (e.g. "mmc")
515 * @devstring: Instance number of destination DFU medium (e.g. "1")
517 * This function is storing data received on DFU supported medium which
518 * is specified by @dfu_entity_name.
520 * Return: 0 - on success, error code - otherwise
522 int dfu_write_by_name(char *dfu_entity_name, void *addr,
523 unsigned int len, char *interface, char *devstring);
526 * dfu_write_by_alt() - write data to DFU medium
527 * @dfu_alt_num: DFU alt setting number
528 * @addr: Address of data buffer to write
529 * @len: Number of bytes
530 * @interface: Destination DFU medium (e.g. "mmc")
531 * @devstring: Instance number of destination DFU medium (e.g. "1")
533 * This function is storing data received on DFU supported medium which
534 * is specified by @dfu_alt_name.
536 * Return: 0 - on success, error code - otherwise
538 int dfu_write_by_alt(int dfu_alt_num, void *addr, unsigned int len,
539 char *interface, char *devstring);
541 static inline int dfu_write_by_name(char *dfu_entity_name, void *addr,
542 unsigned int len, char *interface,
545 puts("write support for DFU not available!\n");
549 static inline int dfu_write_by_alt(int dfu_alt_num, void *addr,
550 unsigned int len, char *interface,
553 puts("write support for DFU not available!\n");
558 int dfu_add(struct usb_configuration *c);
559 #endif /* __DFU_ENTITY_H_ */