include/configs/zipitz2.h

   1 /*
   2  * Aeronix Zipit Z2 configuration file
   3  *
   4  * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /*
  13  * High Level Board Configuration Options
  14  */
  15 #define CONFIG_CPU_PXA27X               1       /* Marvell PXA270 CPU */
  16 #define CONFIG_SYS_TEXT_BASE            0x0
  17
  18 #undef  CONFIG_BOARD_LATE_INIT
  19 #undef  CONFIG_SKIP_LOWLEVEL_INIT
  20 #define CONFIG_PREBOOT
  21
  22 /*
  23  * Environment settings
  24  */
  25 #define CONFIG_ENV_OVERWRITE
  26 #define CONFIG_ENV_IS_IN_FLASH          1
  27 #define CONFIG_ENV_ADDR                 0x40000
  28 #define CONFIG_ENV_SIZE                 0x10000
  29
  30 #define CONFIG_SYS_MALLOC_LEN           (128*1024)
  31 #define CONFIG_ARCH_CPU_INIT
  32
  33 #define CONFIG_BOOTCOMMAND                                              \
  34         "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\
  35         "then "                                                         \
  36                 "source 0xa0000000; "                                   \
  37         "else "                                                         \
  38                 "bootm 0x50000; "                                       \
  39         "fi; "
  40 #define CONFIG_BOOTARGS                                                 \
  41         "console=tty0 console=ttyS2,115200 fbcon=rotate:3"
  42 #define CONFIG_TIMESTAMP
  43 #define CONFIG_CMDLINE_TAG
  44 #define CONFIG_SETUP_MEMORY_TAGS
  45 #define CONFIG_SYS_TEXT_BASE            0x0
  46 #define CONFIG_LZMA                     /* LZMA compression support */
  47
  48 /*
  49  * Serial Console Configuration
  50  * STUART - the lower serial port on Colibri board
  51  */
  52 #define CONFIG_STUART                   1
  53 #define CONFIG_CONS_INDEX               2
  54 #define CONFIG_BAUDRATE                 115200
  55
  56 /*
  57  * Bootloader Components Configuration
  58  */
  59 #define CONFIG_CMD_ENV
  60
  61 /*
  62  * MMC Card Configuration
  63  */
  64 #ifdef  CONFIG_CMD_MMC
  65 #define CONFIG_GENERIC_MMC
  66 #define CONFIG_PXA_MMC_GENERIC
  67 #define CONFIG_SYS_MMC_BASE             0xF0000000
  68 #define CONFIG_DOS_PARTITION
  69 #endif
  70
  71 /*
  72  * SPI and LCD
  73  */
  74 #ifdef  CONFIG_CMD_SPI
  75 #define CONFIG_SOFT_SPI
  76 #define CONFIG_LCD_ROTATION
  77 #define CONFIG_PXA_LCD
  78 #define CONFIG_LMS283GF05
  79
  80 #define SPI_DELAY       udelay(10)
  81 #define SPI_SDA(val)    zipitz2_spi_sda(val)
  82 #define SPI_SCL(val)    zipitz2_spi_scl(val)
  83 #define SPI_READ        zipitz2_spi_read()
  84 #ifndef __ASSEMBLY__
  85 void zipitz2_spi_sda(int);
  86 void zipitz2_spi_scl(int);
  87 unsigned char zipitz2_spi_read(void);
  88 #endif
  89 #endif
  90
  91 #define CONFIG_SYS_LONGHELP                             /* undef to save memory */
  92 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size */
  93 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
  94 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
  95 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
  96 #define CONFIG_SYS_DEVICE_NULLDEV       1
  97
  98 /*
  99  * Clock Configuration
 100  */
 101 #define CONFIG_SYS_CPUSPEED             0x190           /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
 102
 103 /*
 104  * SRAM Map
 105  */
 106 #define PHYS_SRAM                       0x5c000000      /* SRAM Bank #1 */
 107 #define PHYS_SRAM_SIZE                  0x00040000      /* 256k */
 108
 109 /*
 110  * DRAM Map
 111  */
 112 #define CONFIG_NR_DRAM_BANKS            1               /* We have 1 bank of DRAM */
 113 #define PHYS_SDRAM_1                    0xa0000000      /* SDRAM Bank #1 */
 114 #define PHYS_SDRAM_1_SIZE               0x02000000      /* 32 MB */
 115
 116 #define CONFIG_SYS_DRAM_BASE            0xa0000000      /* CS0 */
 117 #define CONFIG_SYS_DRAM_SIZE            0x02000000      /* 32 MB DRAM */
 118
 119 #define CONFIG_SYS_MEMTEST_START        0xa0400000      /* memtest works on */
 120 #define CONFIG_SYS_MEMTEST_END          0xa0800000      /* 4 ... 8 MB in DRAM */
 121
 122 #define CONFIG_SYS_LOAD_ADDR            CONFIG_SYS_DRAM_BASE
 123
 124 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 125 #define CONFIG_SYS_INIT_SP_ADDR         (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048)
 126
 127 /*
 128  * NOR FLASH
 129  */
 130 #define PHYS_FLASH_1                    0x00000000      /* Flash Bank #1 */
 131 #define PHYS_FLASH_SIZE                 0x00800000      /* 8 MB */
 132 #define PHYS_FLASH_SECT_SIZE            0x00010000      /* 64 KB sectors */
 133 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 134
 135 #define CONFIG_SYS_FLASH_CFI
 136 #define CONFIG_FLASH_CFI_DRIVER         1
 137 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 138
 139 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 140 #define CONFIG_SYS_MONITOR_LEN          PHYS_FLASH_SECT_SIZE
 141
 142 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 143 #define CONFIG_SYS_MAX_FLASH_SECT       256
 144
 145 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 146
 147 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000
 148 #define CONFIG_SYS_FLASH_WRITE_TOUT     240000
 149 #define CONFIG_SYS_FLASH_LOCK_TOUT      240000
 150 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    240000
 151 #define CONFIG_SYS_FLASH_PROTECTION
 152
 153 /*
 154  * GPIO settings
 155  */
 156 #define CONFIG_SYS_GAFR0_L_VAL  0x02000140
 157 #define CONFIG_SYS_GAFR0_U_VAL  0x59188000
 158 #define CONFIG_SYS_GAFR1_L_VAL  0x63900002
 159 #define CONFIG_SYS_GAFR1_U_VAL  0xaaa03950
 160 #define CONFIG_SYS_GAFR2_L_VAL  0x0aaaaaaa
 161 #define CONFIG_SYS_GAFR2_U_VAL  0x29000308
 162 #define CONFIG_SYS_GAFR3_L_VAL  0x54000000
 163 #define CONFIG_SYS_GAFR3_U_VAL  0x000000d5
 164 #define CONFIG_SYS_GPCR0_VAL    0x00000000
 165 #define CONFIG_SYS_GPCR1_VAL    0x00000020
 166 #define CONFIG_SYS_GPCR2_VAL    0x00000000
 167 #define CONFIG_SYS_GPCR3_VAL    0x00000000
 168 #define CONFIG_SYS_GPDR0_VAL    0xdafcee00
 169 #define CONFIG_SYS_GPDR1_VAL    0xffa3aaab
 170 #define CONFIG_SYS_GPDR2_VAL    0x8fe9ffff
 171 #define CONFIG_SYS_GPDR3_VAL    0x001b1f8a
 172 #define CONFIG_SYS_GPSR0_VAL    0x06080400
 173 #define CONFIG_SYS_GPSR1_VAL    0x007f0000
 174 #define CONFIG_SYS_GPSR2_VAL    0x032a0000
 175 #define CONFIG_SYS_GPSR3_VAL    0x00000180
 176
 177 #define CONFIG_SYS_PSSR_VAL     0x30
 178
 179 /*
 180  * Clock settings
 181  */
 182 #define CONFIG_SYS_CKEN         0x00511220
 183 #define CONFIG_SYS_CCCR         0x00000190
 184
 185 /*
 186  * Memory settings
 187  */
 188 #define CONFIG_SYS_MSC0_VAL     0x2ffc38f8
 189 #define CONFIG_SYS_MSC1_VAL     0x0000ccd1
 190 #define CONFIG_SYS_MSC2_VAL     0x0000b884
 191 #define CONFIG_SYS_MDCNFG_VAL   0x08000ba9
 192 #define CONFIG_SYS_MDREFR_VAL   0x2011a01e
 193 #define CONFIG_SYS_MDMRS_VAL    0x00000000
 194 #define CONFIG_SYS_FLYCNFG_VAL  0x00010001
 195 #define CONFIG_SYS_SXCNFG_VAL   0x40044004
 196
 197 /*
 198  * PCMCIA and CF Interfaces
 199  */
 200 #define CONFIG_SYS_MECR_VAL     0x00000001
 201 #define CONFIG_SYS_MCMEM0_VAL   0x00014307
 202 #define CONFIG_SYS_MCMEM1_VAL   0x00014307
 203 #define CONFIG_SYS_MCATT0_VAL   0x0001c787
 204 #define CONFIG_SYS_MCATT1_VAL   0x0001c787
 205 #define CONFIG_SYS_MCIO0_VAL    0x0001430f
 206 #define CONFIG_SYS_MCIO1_VAL    0x0001430f
 207
 208 #include "pxa-common.h"
 209
 210 #endif  /* __CONFIG_H */