Merge branch 'master' of git://git.denx.de/u-boot-sh
[platform/kernel/u-boot.git] / include / configs / xpress.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
4  *
5  * Configuration settings for the CCV xPress board
6  */
7 #ifndef __XPRESS_CONFIG_H
8 #define __XPRESS_CONFIG_H
9
10 #include "mx6_common.h"
11 #include <asm/mach-imx/gpio.h>
12
13 /* SPL options */
14 #include "imx6_spl.h"
15
16 /* Size of malloc() pool */
17 #define CONFIG_SYS_MALLOC_LEN           (16 << 20)
18
19 #define CONFIG_MXC_UART
20 #define CONFIG_MXC_UART_BASE            MX6UL_UART7_BASE_ADDR
21
22 /* MMC Configs */
23 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
24
25 /* I2C configs */
26 #define CONFIG_SYS_I2C
27 #define CONFIG_SYS_I2C_MXC
28 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
29 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
30 #define CONFIG_SYS_I2C_MXC_I2C4         /* enable I2C bus 4 */
31 #define CONFIG_SYS_I2C_SPEED            100000
32
33 /* Miscellaneous configurable options */
34 #define CONFIG_SYS_MEMTEST_START        0x80000000
35 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x10000000)
36
37 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
38 #define CONFIG_SYS_HZ                   1000
39
40 /* Physical Memory Map */
41 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
42 #define PHYS_SDRAM_SIZE                 (128 << 20)
43
44 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
45 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
46 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
47
48 #define CONFIG_SYS_INIT_SP_OFFSET \
49         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
50 #define CONFIG_SYS_INIT_SP_ADDR \
51         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
52
53 /* Environment is in stored in the eMMC boot partition */
54 #define CONFIG_SYS_MMC_ENV_DEV          0       /* USDHC2 */
55 #define CONFIG_SYS_MMC_ENV_PART         1       /* boot parition */
56 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC2 */
57
58 /* USB Configs */
59 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
60 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
61 #define CONFIG_MXC_USB_FLAGS            0
62 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
63
64 #define CONFIG_FEC_MXC
65 #define CONFIG_FEC_ENET_DEV             0
66 #define IMX_FEC_BASE                    ENET_BASE_ADDR
67 #define CONFIG_FEC_MXC_PHYADDR          0x0
68 #define CONFIG_FEC_XCV_TYPE             RMII
69 #define CONFIG_ETHPRIME                 "FEC"
70 #define CONFIG_PHY_SMSC
71
72 #define CONFIG_IMX_THERMAL
73
74 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
75
76 #define CONFIG_UBOOT_SECTOR_START       0x2
77 #define CONFIG_UBOOT_SECTOR_COUNT       0x3fe
78
79 #define CONFIG_EXTRA_ENV_SETTINGS \
80         "script=boot.scr\0" \
81         "image=zImage\0" \
82         "console=ttymxc6\0" \
83         "fdt_high=0xffffffff\0" \
84         "initrd_high=0xffffffff\0" \
85         "fdt_file=undefined\0" \
86         "fdt_addr=0x83000000\0" \
87         "boot_fdt=try\0" \
88         "ip_dyn=yes\0" \
89         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
90         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
91         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
92         "mmcautodetect=yes\0" \
93         "mmcargs=setenv bootargs console=${console},${baudrate} " \
94                 "root=${mmcroot}\0" \
95         "loadbootscript=" \
96                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
97         "bootscript=echo Running bootscript from mmc ...; " \
98                 "source\0" \
99         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
100         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
101         "mmcboot=echo Booting from mmc ...; " \
102                 "run mmcargs; " \
103                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
104                         "if run loadfdt; then " \
105                                 "bootz ${loadaddr} - ${fdt_addr}; " \
106                         "else " \
107                                 "if test ${boot_fdt} = try; then " \
108                                         "bootz; " \
109                                 "else " \
110                                         "echo WARN: Cannot load the DT; " \
111                                 "fi; " \
112                         "fi; " \
113                 "else " \
114                         "bootz; " \
115                 "fi;\0" \
116         "uboot=ccv/u-boot.imx\0"                                        \
117         "uboot_start="__stringify(CONFIG_UBOOT_SECTOR_START)"\0"        \
118         "uboot_size="__stringify(CONFIG_UBOOT_SECTOR_COUNT)"\0"         \
119         "update_uboot=if tftp ${uboot}; then "                          \
120                 "if itest ${filesize} > 0; then "                       \
121                         "mmc dev 0 1;"                                  \
122                         "setexpr blkc ${filesize} / 0x200;"             \
123                         "setexpr blkc ${blkc} + 1;"                     \
124                         "if itest ${blkc} <= ${uboot_size}; then "      \
125                                 "mmc write ${loadaddr} ${uboot_start} " \
126                                         "${blkc};"                      \
127                         "fi;"                                           \
128                 "fi; fi;"                                               \
129                 "setenv filesize; setenv blkc\0"                        \
130         "update_bootpart=mmc bootbus 0 2 1 2;mmc partconf 0 1 1 0\0"
131
132 #endif /* __XPRESS_CONFIG_H */