1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
5 * Configuration settings for the CCV xPress board
7 #ifndef __XPRESS_CONFIG_H
8 #define __XPRESS_CONFIG_H
10 #include "mx6_common.h"
11 #include <asm/mach-imx/gpio.h>
16 #define CONFIG_MXC_UART_BASE MX6UL_UART7_BASE_ADDR
19 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
21 /* Miscellaneous configurable options */
23 #define CONFIG_SYS_HZ 1000
25 /* Physical Memory Map */
26 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
27 #define PHYS_SDRAM_SIZE (128 << 20)
29 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
30 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
31 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
33 #define CONFIG_SYS_INIT_SP_OFFSET \
34 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
35 #define CONFIG_SYS_INIT_SP_ADDR \
36 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
38 /* Environment is in stored in the eMMC boot partition */
39 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC2 */
42 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
43 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
44 #define CONFIG_MXC_USB_FLAGS 0
45 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
47 #define CONFIG_FEC_MXC
48 #define CONFIG_FEC_ENET_DEV 0
49 #define IMX_FEC_BASE ENET_BASE_ADDR
50 #define CONFIG_FEC_MXC_PHYADDR 0x0
51 #define CONFIG_FEC_XCV_TYPE RMII
52 #define CONFIG_ETHPRIME "FEC"
54 #define CONFIG_SYS_MMC_IMG_LOAD_PART 1
56 #define CONFIG_UBOOT_SECTOR_START 0x2
57 #define CONFIG_UBOOT_SECTOR_COUNT 0x3fe
59 #define CONFIG_EXTRA_ENV_SETTINGS \
63 "fdt_high=0xffffffff\0" \
64 "initrd_high=0xffffffff\0" \
65 "fdt_file=undefined\0" \
66 "fdt_addr=0x83000000\0" \
69 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
70 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
71 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
72 "mmcautodetect=yes\0" \
73 "mmcargs=setenv bootargs console=${console},${baudrate} " \
76 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
77 "bootscript=echo Running bootscript from mmc ...; " \
79 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
80 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
81 "mmcboot=echo Booting from mmc ...; " \
83 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
84 "if run loadfdt; then " \
85 "bootz ${loadaddr} - ${fdt_addr}; " \
87 "if test ${boot_fdt} = try; then " \
90 "echo WARN: Cannot load the DT; " \
96 "uboot=ccv/u-boot.imx\0" \
97 "uboot_start="__stringify(CONFIG_UBOOT_SECTOR_START)"\0" \
98 "uboot_size="__stringify(CONFIG_UBOOT_SECTOR_COUNT)"\0" \
99 "update_uboot=if tftp ${uboot}; then " \
100 "if itest ${filesize} > 0; then " \
102 "setexpr blkc ${filesize} / 0x200;" \
103 "setexpr blkc ${blkc} + 1;" \
104 "if itest ${blkc} <= ${uboot_size}; then " \
105 "mmc write ${loadaddr} ${uboot_start} " \
109 "setenv filesize; setenv blkc\0" \
110 "update_bootpart=mmc bootbus 0 2 1 2;mmc partconf 0 1 1 0\0"
112 #endif /* __XPRESS_CONFIG_H */